Commit Graph

516 Commits

Author SHA1 Message Date
Linus Torvalds
29a6ccca38 Merge git://git.infradead.org/mtd-2.6
* git://git.infradead.org/mtd-2.6: (97 commits)
  mtd: kill CONFIG_MTD_PARTITIONS
  mtd: remove add_mtd_partitions, add_mtd_device and friends
  mtd: convert remaining users to mtd_device_register()
  mtd: samsung onenand: convert to mtd_device_register()
  mtd: omap2 onenand: convert to mtd_device_register()
  mtd: txx9ndfmc: convert to mtd_device_register()
  mtd: tmio_nand: convert to mtd_device_register()
  mtd: socrates_nand: convert to mtd_device_register()
  mtd: sharpsl: convert to mtd_device_register()
  mtd: s3c2410 nand: convert to mtd_device_register()
  mtd: ppchameleonevb: convert to mtd_device_register()
  mtd: orion_nand: convert to mtd_device_register()
  mtd: omap2: convert to mtd_device_register()
  mtd: nomadik_nand: convert to mtd_device_register()
  mtd: ndfc: convert to mtd_device_register()
  mtd: mxc_nand: convert to mtd_device_register()
  mtd: mpc5121_nfc: convert to mtd_device_register()
  mtd: jz4740_nand: convert to mtd_device_register()
  mtd: h1910: convert to mtd_device_register()
  mtd: fsmc_nand: convert to mtd_device_register()
  ...

Fixed up trivial conflicts in
 - drivers/mtd/maps/integrator-flash.c: removed in ARM tree
 - drivers/mtd/maps/physmap.c: addition of afs partition probe type
   clashing with removal of CONFIG_MTD_PARTITIONS
2011-05-27 20:06:53 -07:00
Jamie Iles
ee0e87b174 mtd: convert remaining users to mtd_device_register()
The older add_mtd_device()/add_mtd_partitions() and their removal
counterparts will soon be gone.  Replace uses with mtd_device_register()
and mtd_device_unregister().

Signed-off-by: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-25 02:25:00 +01:00
Paul Gortmaker
70c7160619 Add appropriate <linux/prefetch.h> include for prefetch users
After discovering that wide use of prefetch on modern CPUs
could be a net loss instead of a win, net drivers which were
relying on the implicit inclusion of prefetch.h via the list
headers showed up in the resulting cleanup fallout.  Give
them an explicit include via the following $0.02 script.

 =========================================
 #!/bin/bash
 MANUAL=""
 for i in `git grep -l 'prefetch(.*)' .` ; do
 	grep -q '<linux/prefetch.h>' $i
 	if [ $? = 0 ] ; then
 		continue
 	fi

 	(	echo '?^#include <linux/?a'
 		echo '#include <linux/prefetch.h>'
 		echo .
 		echo w
 		echo q
 	) | ed -s $i > /dev/null 2>&1
 	if [ $? != 0 ]; then
 		echo $i needs manual fixup
 		MANUAL="$i $MANUAL"
 	fi
 done
 echo ------------------- 8\<----------------------
 echo vi $MANUAL
 =========================================

Signed-off-by: Paul <paul.gortmaker@windriver.com>
[ Fixed up some incorrect #include placements, and added some
  non-network drivers and the fib_trie.c case    - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-22 21:41:57 -07:00
David S. Miller
b562694684 sfc: Don't use enums as a bitmask.
This fixes:

drivers/net/sfc/mcdi_mac.c: In function ‘efx_mcdi_set_mac’:
drivers/net/sfc/mcdi_mac.c:36:2: warning: case value ‘3’ not in enumerated type ‘enum efx_fc_type’

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-17 17:53:22 -04:00
David S. Miller
9cbc94eabb Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	drivers/net/vmxnet3/vmxnet3_ethtool.c
	net/core/dev.c
2011-05-17 17:33:11 -04:00
Ben Hutchings
e4abce8538 sfc: Use netif_device_{detach,attach}() around reset and self-test
We need to keep the TX queues stopped throughout a reset, without
triggering the TX watchdog and regardless of the link state.  The
proper way to do this is to use netif_device_{detach,attach}() just as
we do around suspend/resume, rather than the current bodge of faking
link-down.

Since we also need to do this during an offline self-test and we
perform a reset during that, add these function calls outside of
efx_reset_down() and efx_reset_up().

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2011-05-16 23:34:28 +01:00
Ben Hutchings
867955f568 sfc: Fix oops in register dump after mapping change
Commit 747df2258b ('sfc: Always map MCDI
shared memory as uncacheable') introduced a separate mapping for the
MCDI shared memory (MC_TREG_SMEM).  This means we can no longer easily
include it in the register dump.  Since it is not particularly useful
in debugging, substitute a recognisable dummy value.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-16 15:05:23 -04:00
Ben Hutchings
602a5322a7 sfc: Fix TX queue numbering when separate_tx_channels=1
This option appears to have been broken by commit
8313aca38b ('sfc: Allocate each channel
separately, along with its RX and TX queues').

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2011-05-16 17:35:19 +01:00
Ben Hutchings
47a8467cc0 sfc: Fix return value from efx_ethtool_set_rx_ntuple()
ethtool_ops::set_rx_ntuple is supposed to return 0 on success, but it
currently returns the filter ID when it inserts or modifies a filter.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2011-05-14 02:35:25 +01:00
Ben Hutchings
747df2258b sfc: Always map MCDI shared memory as uncacheable
We enabled write-combining for memory-mapped registers in commit
65f0b417de, but inhibited it for the
MCDI shared memory where this is not supported.  However,
write-combining mappings also allow read-reordering, which may also
be a problem.

I found that when an SFC9000-family controller is connected to an
Intel 3000 chipset, and write-combining is enabled, the controller
stops responding to PCIe read requests during driver initialisation
while the driver is polling for completion of an MCDI command.  This
results in an NMI and system hang.  Adding read memory barriers
between all reads to the shared memory area appears to reduce but not
eliminate the probability of this.

We have not yet established whether this is a bug in our BIU or in the
PCIe bridge.  For now, work around by mapping the shared memory area
separately.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2011-05-12 15:16:32 +01:00
David Decotigny
7073949720 ethtool: cosmetic: Use ethtool ethtool_cmd_speed API
This updates the network drivers so that they don't access the
ethtool_cmd::speed field directly, but use ethtool_cmd_speed()
instead.

For most of the drivers, these changes are purely cosmetic and don't
fix any problem, such as for those 1GbE/10GbE drivers that indirectly
call their own ethtool get_settings()/mii_ethtool_gset(). The changes
are meant to enforce code consistency and provide robustness with
future larger throughputs, at the expense of a few CPU cycles for each
ethtool operation.

All drivers compiled with make allyesconfig ion x86_64 have been
updated.

Tested: make allyesconfig on x86_64 + e1000e/bnx2x work
Signed-off-by: David Decotigny <decot@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-29 14:03:01 -07:00
David Decotigny
25db033881 ethtool: Use full 32 bit speed range in ethtool's set_settings
This makes sure the ethtool's set_settings() callback of network
drivers don't ignore the 16 most significant bits when ethtool calls
their set_settings().

All drivers compiled with make allyesconfig on x86_64 have been
updated.

Signed-off-by: David Decotigny <decot@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-29 14:03:00 -07:00
David Decotigny
8ae6daca85 ethtool: Call ethtool's get/set_settings callbacks with cleaned data
This makes sure that when a driver calls the ethtool's
get/set_settings() callback of another driver, the data passed to it
is clean. This guarantees that speed_hi will be zeroed correctly if
the called callback doesn't explicitely set it: we are sure we don't
get a corrupted speed from the underlying driver. We also take care of
setting the cmd field appropriately (ETHTOOL_GSET/SSET).

This applies to dev_ethtool_get_settings(), which now makes sure it
sets up that ethtool command parameter correctly before passing it to
drivers. This also means that whoever calls dev_ethtool_get_settings()
does not have to clean the ethtool command parameter. This function
also becomes an exported symbol instead of an inline.

All drivers visible to make allyesconfig under x86_64 have been
updated.

Signed-off-by: David Decotigny <decot@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-29 14:01:30 -07:00
David S. Miller
e1943424e4 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	drivers/net/bnx2x/bnx2x_ethtool.c
2011-04-19 00:21:33 -07:00
stephen hemminger
6c8c2513c8 sfc: make function tables const
The phy, mac, and board information structures should be const.
Since tables contain function pointer this improves security
(at least theoretically).

Compile tested only.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-14 21:53:42 -07:00
Allan, Bruce W
fce55922f5 ethtool: allow custom interval for physical identification
When physical identification of an adapter is done by toggling the
mechanism on and off through software utilizing the set_phys_id operation,
it is done with a fixed duration for both on and off states.  Some drivers
may want to set a custom duration for the on/off intervals.  This patch
changes the API so the return code from the driver's entry point when it
is called with ETHTOOL_ID_ACTIVE can specify the frequency at which to
cycle the on/off states, and updates the drivers that have already been
converted to use the new set_phys_id and use the synchronous method for
identifying an adapter.

The physical identification frequency set in the updated drivers is based
on how it was done prior to the introduction of set_phys_id.

Compile tested only.  Also fixes a compiler warning in sfc.

v2: drivers do not return -EINVAL for ETHOOL_ID_ACTIVE
v3: fold patchset into single patch and cleanup per Ben's feedback

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Cc: Ben Hutchings <bhutchings@solarflare.com>
Cc: Sathya Perla <sathya.perla@emulex.com>
Cc: Subbu Seetharaman <subbu.seetharaman@emulex.com>
Cc: Ajit Khaparde <ajit.khaparde@emulex.com>
Cc: Michael Chan <mchan@broadcom.com>
Cc: Eilon Greenstein <eilong@broadcom.com>
Cc: Divy Le Ray <divy@chelsio.com>
Cc: Don Fry <pcnet32@frontier.com>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Solarflare linux maintainers <linux-net-drivers@solarflare.com>
Cc: Steve Hodgson <shodgson@solarflare.com>
Cc: Stephen Hemminger <shemminger@linux-foundation.org>
Cc: Matt Carlson <mcarlson@broadcom.com>
Acked-by: Jon Mason <jdmason@kudzu.us>
Acked-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-14 21:15:49 -07:00
Neil Turton
fcfa060468 sfc: Use rmb() to ensure reads occur in order
Enabling write-combining may also enable read reordering.  The BIU is
only guaranteed to read from a 128-bit CSR or 64-bit SRAM word when
the host reads from its lowest address; otherwise the BIU may use the
latched value.  Therefore we need to reinstate the read memory
barriers after the first read operation for each CSR or SRAM word.

Signed-off-by; Ben Hutchings <bhutchings@solarflare.com>
2011-04-12 23:52:44 +01:00
Ben Hutchings
d4fabcc8e8 sfc: Do not use efx_process_channel_now() in online self-test
During self-tests we use efx_process_channel_now() to handle
completion and other events synchronously.  This disables interrupts
and NAPI processing for the channel in question, but it may still be
interrupted by another channel.  A single socket may receive packets
from multiple net devices or even multiple channels of the same net
device, so this can result in deadlock on a socket lock.

Receiving packets in process context will also result in incorrect
classification by the network cgroup classifier.

Therefore, we must only use efx_process_channel_now() in the offline
loopback tests (which never deliver packets up the stack) and not for
the online interrupt and event tests.

For the interrupt test, there is no reason to process events.  We
only care that an interrupt is raised.

For the event test, we want to know whether events have been received,
and there may be many events ahead of the one we inject.  Therefore
remove efx_channel::magic_count and instead test whether
efx_channel::eventq_read_ptr advances.  This is currently an event
queue index and might wrap around to exactly the same value, resulting
in a false negative.  Therefore move the masking to efx_event() and
efx_nic_eventq_read_ack() so that it cannot wrap within the time of
the test.

The event test also tries to diagnose failures by checking whether an
event was delivered without causing an interrupt.  Add and use a
helper function that only does this.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2011-04-12 16:37:54 +01:00
Neil Turton
9d1aea62e4 sfc: Stop the TX queues during loopback self-tests
If the TX queues are running during loopback self tests, host
traffic gets looped back which causes the test to fail.  Avoid
restarting the TX queues after the port reset so that any packets
sent by the host get held back until after the tests have completed.

[bwh: Also wake all TX queues at the end of self-tests.]

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2011-04-12 16:20:25 +01:00
David S. Miller
1c01a80cfe Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	drivers/net/smsc911x.c
2011-04-11 13:44:25 -07:00
Ben Hutchings
c5e129ac2f sfc: Implement ethtool_ops::set_phys_id instead of ethtool_ops::phys_id
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2011-04-05 15:12:12 +01:00
Ben Hutchings
abfe903980 sfc: Implement generic features interface
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2011-04-05 15:00:02 +01:00
Ben Hutchings
f82d9a67fb sfc: Enable all TSO features on VLANs
The TSO code already supports IPv6 on VLAN, so enable it.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2011-04-05 13:37:02 +01:00
Ben Hutchings
ab3cf6d0f3 sfc: Move test of rx_checksum_enabled from nic.c to rx.c
This is preparation for using the generic netdev features interface,
and should have no effect in itself.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2011-04-01 22:20:06 +01:00
Lucas De Marchi
25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Steve Hodgson
d88d6b05fe sfc: Siena: Disable write-combining when SR-IOV is enabled
If SR-IOV is enabled by firmware, even if it is not enabled in the PCI
capability, TX pushes using write-combining may be corrupted.

We want to know whether it is enabled before mapping the NIC
registers, and even if PCI extended capabilities are not accessible.
Therefore, we look for the MSI capability, which is removed if SR-IOV
is enabled.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2011-03-23 01:35:15 +00:00
David S. Miller
c01c6af84e Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfc-next-2.6 2011-03-08 11:32:45 -08:00
Ben Hutchings
65f0b417de sfc: Use write-combining to reduce TX latency
Based on work by Neil Turton <nturton@solarflare.com> and
Kieran Mansley <kmansley@solarflare.com>.

The BIU has now been verified to handle 3- and 4-dword writes within a
single 128-bit register correctly.  This means we can enable write-
combining and only insert write barriers between writes to distinct
registers.

This has been observed to save about 0.5 us when pushing a TX
descriptor to an empty TX queue.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2011-03-04 17:58:42 +00:00
David S. Miller
0a0e9ae1bd Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	drivers/net/bnx2x/bnx2x.h
2011-03-03 21:27:42 -08:00
Ben Hutchings
6d84b986b2 sfc: Bump version to 3.1
All features originally planned for version 3.1 (and some that
weren't) have been implemented.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2011-02-28 23:57:24 +00:00
Ben Hutchings
5fb6b06d4e sfc: Remove configurable FIFO thresholds for pause frame generation
In Falcon we can configure the fill levels of the RX data FIFO which
trigger the generation of pause frames (if enabled), and we have
module parameters for this.

Siena does not allow the levels to be configured (or, if it does, this
is done by the MC firmware and is not configurable by drivers).

So far as I can tell, the module parameters are not used by our
internal scripts and have not been documented (with the exception of
the short parameter descriptions).  Therefore, remove them and always
initialise Falcon with the default values.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2011-02-28 23:57:24 +00:00
Ben Hutchings
119226c563 sfc: Expose TX push and TSO counters through ethtool statistics
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2011-02-28 23:57:24 +00:00
Ben Hutchings
0a6f40c66b sfc: Update copyright dates
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2011-02-28 23:57:24 +00:00
Ben Hutchings
a461103ba2 sfc: Do not read STAT1.FAULT in efx_mdio_check_mmd()
This field does not exist in all MMDs we want to check, and all
callers allow it to be set (fault_fatal = 0).

Remove the loopback condition, as STAT2.DEVPRST should be valid
regardless of any fault.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2011-02-28 23:57:23 +00:00
Ben Hutchings
e5f0fd2780 sfc: Read MC firmware version when requested through ethtool
We currently make no use of siena_nic_data::fw_{version,build} except
to format the firmware version for ethtool_get_drvinfo().  Since we
only read the version at start of day, this information is incorrect
after an MC firmware update.  Remove the cached version information
and read it via MCDI whenever it is requested.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2011-02-28 23:57:23 +00:00
Steve Hodgson
a526f140b2 sfc: Reduce size of efx_rx_buffer further by removing data member
Instead calculate the KVA of receive data. It's not like it's a hard sum.

[bwh: Fixed to work with GRO.]
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2011-02-28 23:57:23 +00:00
Steve Hodgson
8ba5366ada sfc: Reduce size of efx_rx_buffer by unionising skb and page
[bwh: Forward-ported to net-next-2.6.]
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2011-02-28 23:57:23 +00:00
Eric Dumazet
28801f351f sfc: lower stack usage in efx_ethtool_self_test
drivers/net/sfc/ethtool.c: In function ‘efx_ethtool_self_test’:
drivers/net/sfc/ethtool.c:613: warning: the frame size of 1200 bytes
is larger than 1024 bytes

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22 10:12:01 -08:00
Ben Hutchings
64d8ad6d74 sfc: Implement hardware acceleration of RFS
Use the existing filter management functions to insert TCP/IPv4 and
UDP/IPv4 4-tuple filters for Receive Flow Steering.

For each channel, track how many RFS filters are being added during
processing of received packets and scan the corresponding number of
table entries for filters that may be reclaimed.  Do this in batches
to reduce lock overhead.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2011-02-17 21:00:33 +00:00
Ben Hutchings
d472605104 sfc: Limit filter search depth further for performance hints (i.e. RFS)
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2011-02-16 23:02:03 +00:00
Ben Hutchings
94b274bf5f sfc: Add TX queues for high-priority traffic
Implement the ndo_setup_tc() operation with 2 traffic classes.

Current Solarstorm controllers do not implement TX queue priority, but
they do allow queues to be 'paced' with an enforced delay between
packets.  Paced and unpaced queues are scheduled in round-robin within
two separate hardware bins (paced queues with a large delay may be
placed into a third bin temporarily, but we won't use that).  If there
are queues in both bins, the TX scheduler will alternate between them.

If we make high-priority queues unpaced and best-effort queues paced,
and high-priority queues are mostly empty, a single high-priority queue
can then instantly take 50% of the packet rate regardless of how many
of the best-effort queues have descriptors outstanding.

We do not actually want an enforced delay between packets on best-
effort queues, so we set the pace value to a reserved value that
actually results in a delay of 0.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2011-02-15 19:45:35 +00:00
Ben Hutchings
525da9072c sfc: Distinguish queue lookup from test for queue existence
efx_channel_get_{rx,tx}_queue() currently return NULL if the channel
isn't used for traffic in that direction.  In most cases this is a
bug, but some callers rely on it as an existence test.

Add existence test functions efx_channel_has_{rx_queue,tx_queues}()
and use them as appropriate.

Change efx_channel_get_{rx,tx}_queue() to assert that the requested
queue exists.

Remove now-redundant initialisation from efx_set_channels().

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2011-02-15 19:45:34 +00:00
Ben Hutchings
60031fcc17 sfc: Move TX queue core queue mapping into tx.c
efx_hard_start_xmit() needs to implement a mapping which is the
inverse of tx_queue::core_txq.  Move the initialisation of
tx_queue::core_txq next to efx_hard_start_xmit() to make the
connection more obvious.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2011-02-15 19:45:34 +00:00
Michał Mirosław
04ed3e741d net: change netdev->features to u32
Quoting Ben Hutchings: we presumably won't be defining features that
can only be enabled on 64-bit architectures.

Occurences found by `grep -r` on net/, drivers/net, include/

[ Move features and vlan_features next to each other in
  struct netdev, as per Eric Dumazet's suggestion -DaveM ]

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-24 15:32:47 -08:00
Linus Torvalds
d018b6f4f1 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (47 commits)
  GRETH: resolve SMP issues and other problems
  GRETH: handle frame error interrupts
  GRETH: avoid writing bad speed/duplex when setting transfer mode
  GRETH: fixed skb buffer memory leak on frame errors
  GRETH: GBit transmit descriptor handling optimization
  GRETH: fix opening/closing
  GRETH: added raw AMBA vendor/device number to match against.
  cassini: Fix build bustage on x86.
  e1000e: consistent use of Rx/Tx vs. RX/TX/rx/tx in comments/logs
  e1000e: update Copyright for 2011
  e1000: Avoid unhandled IRQ
  r8169: keep firmware in memory.
  netdev: tilepro: Use is_unicast_ether_addr helper
  etherdevice.h: Add is_unicast_ether_addr function
  ks8695net: Use default implementation of ethtool_ops::get_link
  ks8695net: Disable non-working ethtool operations
  USB CDC NCM: Don't deref NULL in cdc_ncm_rx_fixup() and don't use uninitialized variable.
  vxge: Remember to release firmware after upgrading firmware
  netdev: bfin_mac: Remove is_multicast_ether_addr use in netdev_for_each_mc_addr
  ipsec: update MAX_AH_AUTH_LEN to support sha512
  ...
2011-01-14 13:25:30 -08:00
Linus Torvalds
d73b388459 Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI/PM: Report wakeup events before resuming devices
  PCI/PM: Use pm_wakeup_event() directly for reporting wakeup events
  PCI: sysfs: Update ROM to include default owner write access
  x86/PCI: make Broadcom CNB20LE driver EMBEDDED and EXPERIMENTAL
  x86/PCI: don't use native Broadcom CNB20LE driver when ACPI is available
  PCI/ACPI: Request _OSC control once for each root bridge (v3)
  PCI: enable pci=bfsort by default on future Dell systems
  PCI/PCIe: Clear Root PME Status bits early during system resume
  PCI: pci-stub: ignore zero-length id parameters
  x86/PCI: irq and pci_ids patch for Intel Patsburg
  PCI: Skip id checking if no id is passed
  PCI: fix __pci_device_probe kernel-doc warning
  PCI: make pci_restore_state return void
  PCI: Disable ASPM if BIOS asks us to
  PCI: Add mask bit definition for MSI-X table
  PCI: MSI: Move MSI-X entry definition to pci_regs.h

Fix up trivial conflicts in drivers/net/{skge.c,sky2.c} that had in the
meantime been converted to not use legacy PCI power management, and thus
no longer use pci_restore_state() at all (and that caused trivial
conflicts with the "make pci_restore_state return void" patch)
2011-01-14 09:29:05 -08:00
Ben Hutchings
5b874e25c5 sfc: Restore the effect of the rss_cpus module parameter
Commit a4900ac ("sfc: Create multiple TX queues") accidentally
disabled the rss_cpus module parameter.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2011-01-13 22:09:17 +00:00
Ben Hutchings
976534319b sfc: Make efx_get_tx_queue() an inline function
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2011-01-13 22:08:43 +00:00
Jon Mason
1d3c16a818 PCI: make pci_restore_state return void
pci_restore_state only ever returns 0, thus there is no benefit in
having it return any value.  Also, a large majority of the callers do
not check the return code of pci_restore_state.  Make the
pci_restore_state a void return and avoid the overhead.

Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Jon Mason <jon.mason@exar.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-12-23 12:53:09 -08:00
David S. Miller
a13c13273a Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfc-next-2.6 2010-12-21 12:17:29 -08:00