Commit Graph

112 Commits

Author SHA1 Message Date
Wei Yongjun
3cd9749c0b sctp: update the route for non-active transports after addresses are added
Update the route and saddr entries for the non-active transports as some
of the added addresses can be used as better source addresses, or may
be there is a better route.

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2009-09-04 18:20:55 -04:00
Wei Yongjun
44e65c1ef1 sctp: check the unrecognized ASCONF parameter before access it
This patch fix to check the unrecognized ASCONF parameter before
access it.

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2009-09-04 18:20:54 -04:00
Wei Yongjun
425e0f6852 sctp: avoid overwrite the return value of sctp_process_asconf_ack()
The return value of sctp_process_asconf_ack() may be
overwritten while process parameters with no error.
This patch fixed the problem.

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2009-09-04 18:20:54 -04:00
Wei Yongjun
945e5abcee sctp: fix the error code when ASCONF is received with invalid address
Use Unresolvable Address error cause instead of Invalid Mandatory
Parameter error cause when process ASCONF chunk with invalid address
since address parameters are not mandatory in the ASCONF chunk.

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2009-06-03 09:14:45 -04:00
Wei Yongjun
a987f762ca sctp: fix report unrecognized parameter in ACSONF-ACK
RFC5061 Section 5.2.  Upon Reception of an ASCONF Chunk

V2)  In processing the chunk, the receiver should build a
     response message with the appropriate error TLVs, as
     specified in the Parameter type bits, for any ASCONF
     Parameter it does not understand.  To indicate an
     unrecognized parameter, Cause Type 8 should be used as
     defined in the ERROR in Section 3.3.10.8, [RFC4960].  The
     endpoint may also use the response to carry rejections for
     other reasons, such as resource shortages, etc., using the
     Error Cause TLV and an appropriate error condition.

So we should indicate an unrecognized parameter with error
SCTP_ERROR_UNKNOWN_PARAM in ACSONF-ACK chunk, not
SCTP_ERROR_INV_PARAM.

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2009-06-03 09:14:45 -04:00
malc
6fc791ee63 sctp: add Adaptation Layer Indication parameter only when it's set
RFC5061 states:

        Each adaptation layer that is defined that wishes
        to use this parameter MUST specify an adaptation code point in an
        appropriate RFC defining its use and meaning.

If the user has not set one - assume they don't want to sent the param
with a zero Adaptation Code Point.

Rationale - Currently the IANA defines zero as reserved - and
1 as the only valid value - so we consider zero to be unset - to save
adding a boolean to the socket structure.

Including this parameter unconditionally causes endpoints that do not
understand it to report errors unnecessarily.

Signed-off-by: Malcolm Lashley <mlashley@gmail.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13 11:37:58 -07:00
Wei Yongjun
5ffad5aceb sctp: fix to indicate ASCONF support in INIT-ACK only if peer has such capable
This patch fix to indicate ASCONF support in INIT-ACK only if peer has
such capable.

This patch also fix to calc the chunk size if peer has no FWD-TSN
capable.

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13 11:37:56 -07:00
Harvey Harrison
09640e6365 net: replace uses of __constant_{endian}
Base versions handle constant folding now.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-01 00:45:17 -08:00
Vlad Yasevich
02015180e2 sctp: shrink sctp_tsnmap some more by removing gabs array
The gabs array in the sctp_tsnmap structure is only used
in one place, sctp_make_sack().  As such, carrying the
array around in the sctp_tsnmap and thus directly in
the sctp_association is rather pointless since most
of the time it's just taking up space.  Now, let
sctp_make_sack create and populate it and then throw
it away when it's done.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-08 14:19:01 -07:00
Vlad Yasevich
8e1ee18c33 sctp: Rework the tsn map to use generic bitmap.
The tsn map currently use is 4K large and is stuck inside
the sctp_association structure making memory references REALLY
expensive.  What we really need is at most 4K worth of bits
so the biggest map we would have is 512 bytes.   Also, the
map is only really usefull when we have gaps to store and
report.  As such, starting with minimal map of say 32 TSNs (bits)
should be enough for normal low-loss operations.  We can grow
the map by some multiple of 32 along with some extra room any
time we receive the TSN which would put us outside of the map
boundry.  As we close gaps, we can shift the map to rebase
it on the latest TSN we've seen.  This saves 4088 bytes per
association just in the map alone along savings from the now
unnecessary structure members.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-08 14:18:39 -07:00
Vlad Yasevich
e69c4e0f12 sctp: correctly save sctp_adaptation from parameter.
The INIT perameter carries the adapatation value in network-byte
order.  We need to store it in host byte order as expected
by data types and the user API.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2008-10-01 11:34:16 -04:00
Neil Horman
c226ef9b83 sctp: reduce memory footprint of sctp_chunk structure
sctp_chunks should be put on a diet.  This is some of the low hanging
fruit that we can strip out.  Changes all the __s8/__u8 flags to
bitfields.  Saves 12 bytes per chunk.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2008-10-01 11:33:06 -04:00
Wei Yongjun
ba0166708e sctp: Fix kernel panic while process protocol violation parameter
Since call to function sctp_sf_abort_violation() need paramter 'arg' with
'struct sctp_chunk' type, it will read the chunk type and chunk length from
the chunk_hdr member of chunk. But call to sctp_sf_violation_paramlen()
always with 'struct sctp_paramhdr' type's parameter, it will be passed to
sctp_sf_abort_violation(). This may cause kernel panic.

   sctp_sf_violation_paramlen()
     |-- sctp_sf_abort_violation()
        |-- sctp_make_abort_violation()

This patch fixed this problem. This patch also fix two place which called
sctp_sf_violation_paramlen() with wrong paramter type.

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-30 05:32:24 -07:00
Vlad Yasevich
add52379dd sctp: Fix oops when INIT-ACK indicates that peer doesn't support AUTH
If INIT-ACK is received with SupportedExtensions parameter which
indicates that the peer does not support AUTH, the packet will be
silently ignore, and sctp_process_init() do cleanup all of the
transports in the association.
When T1-Init timer is expires, OOPS happen while we try to choose
a different init transport.

The solution is to only clean up the non-active transports, i.e
the ones that the peer added.  However, that introduces a problem
with sctp_connectx(), because we don't mark the proper state for
the transports provided by the user.  So, we'll simply mark
user-provided transports as ACTIVE.  That will allow INIT
retransmissions to work properly in the sctp_connectx() context
and prevent the crash.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-18 16:28:27 -07:00
Vlad Yasevich
0ef46e285c sctp: do not enable peer features if we can't do them.
Do not enable peer features like addip and auth, if they
are administratively disabled localy.  If the peer resports
that he supports something that we don't, neither end can
use it so enabling it is pointless.  This solves a problem
when talking to a peer that has auth and addip enabled while
we do not.  Found by Andrei Pelinescu-Onciul <andrei@iptel.org>.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-18 16:27:38 -07:00
Vlad Yasevich
7dab83de50 sctp: Support ipv6only AF_INET6 sockets.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-18 23:05:40 -07:00
Patrick McHardy
c1cc678ada sctp: Fix use of uninitialized pointer
Introduced by c4492586 (sctp: Add address type check while process
paramaters of ASCONF chunk):

net/sctp/sm_make_chunk.c: In function 'sctp_process_asconf':
net/sctp/sm_make_chunk.c:2828: warning: 'addr_param' may be used uninitialized in this function
net/sctp/sm_make_chunk.c:2828: note: 'addr_param' was declared here

Signed-off-by: Patrick McHardy <kaber@trash.net>
Acked-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-13 23:25:00 -07:00
Wei Yongjun
c4492586a6 sctp: Add address type check while process paramaters of ASCONF chunk
If socket is create by AF_INET type, add IPv6 address to asoc will cause
kernel panic while packet is transmitted on that transport.

This patch add address type check before process paramaters of ASCONF
chunk. If peer is not support this address type, return with error
invald parameter.

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-12 03:11:48 -07:00
Wei Yongjun
6e40a915de sctp: Do not enable peer IPv6 address support on PF_INET socket
If socket is create by PF_INET type, it can not used IPv6 address to
send/recv DATA, So we can not used IPv6 address even if peer tell us it
support IPv6 address.
This patch fix to only enabled peer IPv6 address support on PF_INET6 socket.

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-12 03:11:43 -07:00
David S. Miller
df39e8ba56 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:

	drivers/net/ehea/ehea_main.c
	drivers/net/wireless/iwlwifi/Kconfig
	drivers/net/wireless/rt2x00/rt61pci.c
	net/ipv4/inet_timewait_sock.c
	net/ipv6/raw.c
	net/mac80211/ieee80211_sta.c
2008-04-14 02:30:23 -07:00
Robert P. J. Day
9dbc15f055 [SCTP]: "list_for_each()" -> "list_for_each_entry()" where appropriate.
Replacing (almost) all invocations of list_for_each() with
list_for_each_entry() tightens up the code and allows for the deletion
of numerous list iterator variables that are no longer necessary.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-12 18:54:24 -07:00
Wei Yongjun
72da7b3860 [SCTP]: Add check for hmac_algo parameter in sctp_verify_param()
RFC 4890 has the following text:

  The HMAC algorithm based on SHA-1 MUST be supported and
  included in the HMAC-ALGO parameter.

As a result, we need to check in sctp_verify_param() that HMAC_SHA1 is
present in the list.  If not, we should probably treat this as a
protocol violation.

It should also be a protocol violation if the HMAC parameter is empty.

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-12 18:39:19 -07:00
Florian Westphal
2444844cef [SCTP]: Replace char msg[] with static const char[].
133886    2004     220  136110   213ae sctp.new/sctp.o
134018    2004     220  136242   21432 sctp.old/sctp.o

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-23 22:46:34 -07:00
Gui Jianfeng
140ee9603c SCTP: Fix chunk parameter processing bug
If an address family is not listed in "Supported Address Types"
parameter(INIT Chunk), but the packet is sent by that family, this
address family should be considered as supported by peer.  Otherwise,
an error condition will occur. For instance, if kernel receives an
IPV6 SCTP INIT chunk with "Support Address Types" parameter which
indicates just supporting IPV4 Address family. Kernel will reply an
IPV6 SCTP INIT ACK packet, but the source ipv6 address in ipv6 header
will be vacant. This is not correct.

refer to RFC4460 as following:
      IMPLEMENTATION NOTE: If an SCTP endpoint lists in the 'Supported
      Address Types' parameter either IPv4 or IPv6, but uses the other
      family for sending the packet containing the INIT chunk, or if it
      also lists addresses of the other family in the INIT chunk, then
      the address family that is not listed in the 'Supported Address
      Types' parameter SHOULD also be considered as supported by the
      receiver of the INIT chunk.  The receiver of the INIT chunk SHOULD
      NOT respond with any kind of error indication.

Here is a fix to comply to RFC.

Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Acked-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-05 13:43:32 -08:00
Vlad Yasevich
5f9646c3d9 [SCTP]: Make sure the chunk is off the transmitted list prior to freeing.
In a few instances, we need to remove the chunk from the transmitted list
prior to freeing it.  This is because the free code doesn't do that any
more and so we need to do it manually.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2008-02-06 21:27:39 -05:00
Vlad Yasevich
60c778b259 [SCTP]: Stop claiming that this is a "reference implementation"
I was notified by Randy Stewart that lksctp claims to be
"the reference implementation".  First of all, "the
refrence implementation" was the original implementation
of SCTP in usersapce written ty Randy and a few others.
Second, after looking at the definiton of 'reference implementation',
we don't really meet the requirements.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2008-02-05 10:59:07 -05:00
Wei Yongjun
ec9dbb1c3e [SCTP]: Fix miss of report unrecognized HMAC Algorithm parameter
This patch fix miss of check for report unrecognized HMAC Algorithm
parameter.  When AUTH is disabled, goto fall through path to report
unrecognized parameter, else, just break

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:27:09 -08:00
Vlad Yasevich
d670119132 [SCTP]: Follow Add-IP security consideratiosn wrt INIT/INIT-ACK
The Security Considerations section of RFC 5061 has the following
text:

   If an SCTP endpoint that supports this extension receives an INIT
   that indicates that the peer supports the ASCONF extension but does
   NOT support the [RFC4895] extension, the receiver of such an INIT
   MUST send an ABORT in response.  Note that an implementation is
   allowed to silently discard such an INIT as an option as well, but
   under NO circumstance is an implementation allowed to proceed with
   the association setup by sending an INIT-ACK in response.

   An implementation that receives an INIT-ACK that indicates that the
   peer does not support the [RFC4895] extension MUST NOT send the
   COOKIE-ECHO to establish the association.  Instead, the
   implementation MUST discard the INIT-ACK and report to the upper-
   layer user that an association cannot be established destroying the
   Transmission Control Block (TCB).

Follow the recomendations.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:59:25 -08:00
Vlad Yasevich
f57d96b2e9 [SCTP]: Change use_as_src into a full address state
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:59:24 -08:00
Vlad Yasevich
a08de64d07 [SCTP]: Update ASCONF processing to conform to spec.
The processing of the ASCONF chunks has changed a lot in the
spec.  New items are:
    1. A list of ASCONF-ACK chunks is now cached
    2. The source of the packet is used in response.
    3. New handling for unexpect ASCONF chunks.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:59:23 -08:00
Vlad Yasevich
d6de309759 [SCTP]: Add the handling of "Set Primary IP Address" parameter to INIT
The ADD-IP "Set Primary IP Address" parameter is allowed in the
INIT/INIT-ACK exchange.  Allow processing of this parameter during
the INIT/INIT-ACK.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:59:21 -08:00
Vlad Yasevich
42e30bf346 [SCTP]: Handle the wildcard ADD-IP Address parameter
The Address Parameter in the parameter list of the ASCONF chunk
may be a wildcard address.  In this case special processing
is required.  For the 'add' case, the source IP of the packet is
added.  In the 'del' case, all addresses except the source IP
of packet are removed. In the "mark primary" case, the source
address is marked as primary.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:59:20 -08:00
Vlad Yasevich
036b579b11 [SCTP]: Add back the code that accounted for FORWARD_TSN parameter in INIT.
Some recent changes completely removed accounting for the FORWARD_TSN
parameter length in the INIT and INIT-ACK chunk.  This is wrong and
should be restored.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-08 23:30:04 -08:00
Joe Perches
7aa1b54b74 [SCTP]: Spelling fixes
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-20 14:03:52 -08:00
Vlad Yasevich
8ee4be37e8 SCTP: Fix the supported extensions paramter
Supported extensions parameter was not coded right and ended up
over-writing memory or causing skb overflows.  First, remove
the FWD_TSN support from as it shouldn't be there and also fix
the paramter encoding.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2007-11-29 10:17:41 -05:00
Vlad Yasevich
9baffaa689 SCTP: Fix SCTP-AUTH to correctly add HMACS paramter.
There was a typo that cleared the HMACS parameters when no
authenticated chunks were specified.  We whould be clearing
the chunks pointer instead of the hmacs.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2007-11-29 10:17:41 -05:00
Vlad Yasevich
7ab9080467 SCTP: Make sctp_verify_param return multiple indications.
SCTP-AUTH and future ADD-IP updates have a requirement to
do additional verification of parameters and an ability to
ABORT the association if verification fails.  So, introduce
additional return code so that we can clear signal a required
action.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2007-11-09 11:43:41 -05:00
Vlad Yasevich
73d9c4fd1a SCTP: Allow ADD_IP to work with AUTH for backward compatibility.
This patch adds a tunable that will allow ADD_IP to work without
AUTH for backward compatibility.  The default value is off since
the default value for ADD_IP is off as well.  People who need
to use ADD-IP with older implementations take risks of connection
hijacking and should consider upgrading or turning this tunable on.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2007-11-07 11:39:27 -05:00
Vlad Yasevich
88799fe5ec SCTP: Correctly disable ADD-IP when AUTH is not supported.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2007-11-07 11:39:27 -05:00
Vlad Yasevich
0ed90fb0f6 SCTP: Update RCU handling during the ADD-IP case
After learning more about rcu, it looks like the ADD-IP hadling
doesn't need to call call_rcu_bh.  All the rcu critical sections
use rcu_read_lock, so using call_rcu_bh is wrong here.
Now, restore the local_bh_disable() code blocks and use normal
call_rcu() calls.  Also restore the missing return statement.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2007-11-07 11:39:27 -05:00
Wei Yongjun
f3830ccc2e SCTP : Fix to process bundled ASCONF chunk correctly
If ASCONF chunk is bundled with other chunks as the first chunk, when
process the ASCONF parameters, full packet data will be process as the
parameters of the ASCONF chunk, not only the real parameters. So if you
send a ASCONF chunk bundled with other chunks, you will get an unexpect
result.
This problem also exists when ASCONF-ACK chunk is bundled with other chunks.

This patch fix this problem.

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2007-11-07 11:39:27 -05:00
Herbert Xu
68e3f5dd4d [CRYPTO] users: Fix up scatterlist conversion errors
This patch fixes the errors made in the users of the crypto layer during
the sg_init_table conversion.  It also adds a few conversions that were
missing altogether.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-27 00:52:07 -07:00
Jens Axboe
642f149031 SG: Change sg_set_page() to take length and offset argument
Most drivers need to set length and offset as well, so may as well fold
those three lines into one.

Add sg_assign_page() for those two locations that only needed to set
the page, where the offset/length is set outside of the function context.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-24 11:20:47 +02:00
Christian Borntraeger
ebc3bbcfcf Fix sctp compile
sctp fails to compile with
net/sctp/sm_make_chunk.c: In function 'sctp_pack_cookie':
net/sctp/sm_make_chunk.c:1516: error: implicit declaration of function 'sg_init_table'
net/sctp/sm_make_chunk.c:1517: error: implicit declaration of function 'sg_set_page'

use the proper include file.

SCTP maintainers Vlad Yasevich and Sridhar Samudrala  are CCed.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-23 12:46:32 +02:00
Jens Axboe
fa05f1286b Update net/ to use sg helpers
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-22 21:19:56 +02:00
Vlad Yasevich
6b2f9cb64d [SCTP]: Tie ADD-IP and AUTH functionality as required by spec.
ADD-IP spec requires AUTH. It is, in fact, dangerous without AUTH.
So, disable ADD-IP functionality if the peer claims to support
ADD-IP, but not AUTH.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:51:33 -07:00
Vlad Yasevich
4cd57c8078 [SCTP]: Enable the sending of the AUTH chunk.
SCTP-AUTH, Section 6.2:

   Endpoints MUST send all requested chunks authenticated where this has
   been requested by the peer.  The other chunks MAY be sent
   authenticated or not.  If endpoint pair shared keys are used, one of
   them MUST be selected for authentication.

   To send chunks in an authenticated way, the sender MUST include these
   chunks after an AUTH chunk.  This means that a sender MUST bundle
   chunks in order to authenticate them.

   If the endpoint has no endpoint pair shared key for the peer, it MUST
   use Shared Key Identifier 0 with an empty endpoint pair shared key.
   If there are multiple endpoint shared keys the sender selects one and
   uses the corresponding Shared Key Identifier

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:51:31 -07:00
Vlad Yasevich
730fc3d05c [SCTP]: Implete SCTP-AUTH parameter processing
Implement processing for the CHUNKS, RANDOM, and HMAC parameters and
deal with how this parameters are effected by association restarts.
In particular, during unexpeted INIT processing, we need to reply with
parameters from the original INIT chunk.  Also, after restart, we need
to update the old association with new peer parameters and change the
association shared keys.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:51:30 -07:00
Vlad Yasevich
131a47e31a [SCTP]: Implement the Supported Extensions Parameter
SCTP Supported Extenions parameter is specified in Section 4.2.7
of the ADD-IP draft (soon to be RFC).  The parameter is
encoded as:

      0                   1                   2                   3
      0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
     |     Parameter Type = 0x8008   |      Parameter Length         |
     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
     | CHUNK TYPE 1  |  CHUNK TYPE 2 |  CHUNK TYPE 3 |  CHUNK TYPE 4 |
     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
     |                             ....                              |
     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
     | CHUNK TYPE N  |      PAD      |      PAD      |      PAD      |
     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

It contains a list of chunks that a particular SCTP extension
uses.  Current extensions supported are Partial Reliability
(FWD-TSN) and ADD-IP (ASCONF and ASCONF-ACK).

When implementing new extensions (AUTH, PKT-DROP, etc..), new
chunks need to be added to this parameter.  Parameter processing
would be modified to negotiate support for these new features.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:51:23 -07:00
Adrian Bunk
5c94bf86c8 [SCTP]: Make sctp_addto_param() static.
sctp_addto_param() can become static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:49:19 -07:00