Commit Graph

190 Commits

Author SHA1 Message Date
Cornelia Huck
f97a56fb76 [PATCH] s390: introduce for_each_subchannel
for_each_subchannel() is an iterator calling a function for every possible
subchannel id until non-zero is returned.  Convert the current iterating
functions to it.

Signed-off-by: Cornelia Huck <cohuck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 08:33:51 -08:00
Cornelia Huck
a8237fc410 [PATCH] s390: introduce struct subchannel_id
This patch introduces a struct subchannel_id containing the subchannel number
(formerly referred to as "irq") and switches code formerly relying on the
subchannel number over to it.

While we're touching inline assemblies anyway, make sure they have correct
memory constraints.

Signed-off-by: Cornelia Huck <cohuck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 08:33:51 -08:00
Frank Pavlic
8129ee1642 [PATCH] s390: qdio V=V pass-through
New feature V=V qdio pass-through.

QDIO and HiperSockets processing in z/VM V=V guest environments (as well as
V=R with z/VM running in LPAR mode) requires shadowing of all QDIO
architecture queue elements.  Especially the shadowing of SBALs and SLSBs
structures in the hypervisor, and the need to issue SIGA SYNC operations to
observe state changes, eventually causes significant CPU processing overhead
in the hypervisor.

The QDIO pass-through support for V=V guests avoids the shadowing of SBALs and
SLSBs.  This significantly reduces the hypervisor overhead for QDIO based I/O.

Signed-off-by: Frank Pavlic <pavlic@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 08:33:51 -08:00
Horst Hummel
1c01b8a596 [PATCH] s390: dasd failfast support
To properly support multipath-failover handling, the linux block layer has
introduced a special request flag, 'REQ_FAILFAST'.  This flag is now used to
return requests immediately in case the device is not operational.

Signed-off-by: Horst Hummel <horst.hummel@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 08:33:50 -08:00
Horst Hummel
9a7af28966 [PATCH] s390: BIODASDPRRD ioctl return code
The IOCTL BIODASDPRRD had no return code for 'profiling is inactive' and
therefore tunedasd wrote misleading message for request-counter = 0.
Introduce return-code EIO for inactive profiling.

Signed-off-by: Horst Hummel <horst.hummel@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 08:33:50 -08:00
Carsten Otte
cfb1b55595 [PATCH] s390: move s390_root_dev_* out of the cio layer
Extract the s390_root_dev_* functions from the common I/O layer as they are
also used by non-ccw device drivers.

Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 08:33:49 -08:00
Cornelia Huck
6810a2bce3 [PATCH] s390: re-activated path detection
If we receive path not operational indications (pnom in pmcw nonzero), we
switch off those paths.  To catch them becoming available again, we have to
recalculate the lpm from the pmcw each time we start path verification.

Signed-off-by: Cornelia Huck <cohuck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 08:33:49 -08:00
Peter Oberparleiter
56dc6a88ec [PATCH] s390: cms volume label definitions
Moved definition of CMS volume label to vtoc.h and modify partitions/ibm.c to
use this volume label definition instead of anonymous array.

Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 08:33:48 -08:00
Martin Schwidefsky
973bd99375 [PATCH] s390: atomic primitives
Hugh Dickins <hugh@veritas.com>

Fix the broken atomic_cmpxchg primitive.  Add atomic_sub_and_test,
atomic64_sub_return, atomic64_sub_and_test, atomic64_cmpxchg,
atomic64_add_unless and atomic64_inc_not_zero.  Replace old style
atomic_compare_and_swap by atomic_cmpxchg.  Shorten the whole header by
defining most primitives with the two inline functions atomic_add_return and
atomic_sub_return.

In addition this patch contains the s390 related fixes of Hugh's "mm: fill
arch atomic64 gaps" patch.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 08:33:48 -08:00
Tejun Heo
8ffdc6550c [BLOCK] add @uptodate to end_that_request_last() and @error to rq_end_io_fn()
add @uptodate argument to end_that_request_last() and @error
to rq_end_io_fn().  there's no generic way to pass error code
to request completion function, making generic error handling
of non-fs request difficult (rq->errors is driver-specific and
each driver uses it differently).  this patch adds @uptodate
to end_that_request_last() and @error to rq_end_io_fn().

for fs requests, this doesn't really matter, so just using the
same uptodate argument used in the last call to
end_that_request_first() should suffice.  imho, this can also
help the generic command-carrying request jens is working on.

Signed-off-by: tejun heo <htejun@gmail.com>
Signed-Off-By: Jens Axboe <axboe@suse.de>
2006-01-06 09:49:03 +01:00
Paul Jackson
6d20b035de [PATCH] driver kill hotplug word from sn and others fix
The first of these changes s/hotplug/uevent/ was needed to
compile sn2_defconfig (ia64/sn).  The other three files
changed are blind changes of all remaining bus_type.hotplug
references I could find to bus_type.uevent.

This patch attempts to finish similar changes made in the
gregkh-driver-kill-hotplug-word-from-driver-core Nov 22 patch.

Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04 16:18:08 -08:00
Kay Sievers
0296b22813 [PATCH] remove CONFIG_KOBJECT_UEVENT option
It makes zero sense to have hotplug, but not the netlink
events enabled today. Remove this option and merge the
kobject_uevent.h header into the kobject.h header file.

Signed-off-by: Kay Sievers <kay.sievers@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04 16:18:07 -08:00
Frank Pavlic
3df3cc6d18 [PATCH] s390: remove redundant and useless code in qeth
[patch 3/3] s390: remove redundant and useless code in qeth

From: Frank Pavlic <pavlic@de.ibm.com>
	- remove redundant and useless code in qeth for
	  procfs operations.
	- update Revision numbers
Signed-off-by: Frank Pavlic <pavlic@de.ibm.com>

diffstat:
 qeth_main.c |    6 -
 qeth_mpc.c  |    2
 qeth_mpc.h  |    2
 qeth_proc.c |  250 ++++++------------------------------------------------------
 qeth_sys.c  |    4
 qeth_tso.h  |    4
 6 files changed, 38 insertions(+), 230 deletions(-)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-24 10:05:52 -05:00
Frank Pavlic
4965e97fd3 [PATCH] s390: minor qeth network driver fixes
[patch 2/3] s390: minor qeth network driver fixes

From: Frank Pavlic <pavlic@de.ibm.com>
	- use netif_carrier_on/off calls to tell network stack
	  link carrier state
	- fix possible kfree on NULL
	- PDU_LEN2 is at offset 0x29 otherwise OSN chpid won't initialize

Signed-off-by: Frank Pavlic <pavlic@de.ibm.com>

diffstat:
 qeth_eddp.c |    3 ++-
 qeth_main.c |   17 +++++++----------
 qeth_mpc.h  |    2 +-
 3 files changed, 10 insertions(+), 12 deletions(-)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-24 10:05:51 -05:00
Frank Pavlic
6c6b3e7c4f [PATCH] s390: some minor qeth driver fixes
[patch 1/3] s390: some minor qeth driver fixes

From: Frank Pavlic <pavlic@de.ibm.com>
	- let's have just one function for both ,input and output queue
	  to check qdio errors
	- add /proc/s390dbf/qeth_qerr entries for outbound processing
	- check removed for layer2 device in qeth_add_multicast_ipv6
	- NULL pointer dereference with bonding and VLAN device fixed
	- minimum length check for portname fixed

Signed-off-by: Frank Pavlic <pavlic@de.ibm.com>

diffstat:
qeth_main.c |   42 +++++++++++++++++++++---------------------
qeth_sys.c  |    6 +++---
2 files changed, 24 insertions(+), 24 deletions(-)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-24 10:05:51 -05:00
Andreas Herrmann
fb121b067b [SCSI] zfcp: fix return code of zfcp_scsi_slave_alloc
Change return code in slave_alloc to avoid irritating error message from
scsi_alloc_sdev() when scsi stack tries target scan.

Signed-off-by: Andreas Herrmann <aherrman@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-01 15:59:49 -06:00
Maxim Shchetynin
ee69ab7af3 [SCSI] zfcp: fix link down handling during firmware update
Don't check link down payload in case of firmware update.

Signed-off-by: Maxim Shchetynin <maxim@de.ibm.com>
Signed-off-by: Andreas Herrmann <aherrman@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-01 15:59:48 -06:00
Andreas Herrmann
2448c45965 [SCSI] zfcp: fix adapter initialization
Fixed various problems in opening sequence of adapters which was previously
changed with NPIV support:
o corrected handling when exchange port data function is not supported,
  otherwise adapters on z900 cannot be opened anymore
o corrected setup of timer for exchange port data if called from error
  recovery
o corrected check of return code of exchange config data

Signed-off-by: Andreas Herrmann <aherrman@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-01 15:59:47 -06:00
Heiko Carstens
c48a29d065 [SCSI] zfcp: fix spinlock initialization
Move initialization of locks and lists to adapter allocation function.
Otherwise we might end up with some uninitialized locks, like e.g. the
erp locks which only will be inititialized if an error recovery thread
for an adapter will be started.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andreas Herrmann <aherrman@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-01 15:59:46 -06:00
Martin Schwidefsky
fc71fe40d2 [PATCH] s390: fix class_device_create calls in 3270 the driver
Add the missing NULL argument to the class_device_create calls.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-18 07:49:46 -08:00
Frank Pavlic
1387780f7d [PATCH] s390: mail address changed
[patch 7/7] s390: mail address changed

From: Frank Pavlic <fpavlic@de.ibm.com>
	- mail address changed to fpavlic@de.ibm.com

Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com>

diffstat:
 lcs.c       |    4 ++--
 qeth_main.c |    4 ++--
 qeth_mpc.c  |    2 +-
 qeth_mpc.h  |    2 +-
 qeth_sys.c  |    2 +-
 qeth_tso.h  |    2 +-
 6 files changed, 8 insertions(+), 8 deletions(-)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-11 08:26:22 -05:00
Frank Pavlic
6c951b9051 [PATCH] s390: introduce guestLan sniffer support in qeth
[patch 6/7] s390: introduce guestLan sniffer support in qeth

From: Peter Tiedemann  <ptiedem@de.ibm.com>
	- introduce guestLan sniffer support in qeth
	  feature allows a linux in a virtual machine
	  guest to become a network LAN sniffer,
	  monitoring and recording the networking traffic
	  within an entire guestLan.

Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com>

diffstat:
 qeth.h      |    2 +
 qeth_main.c |   93 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 qeth_mpc.h  |   11 ++++---
 3 files changed, 102 insertions(+), 4 deletions(-)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-11 08:26:22 -05:00
Frank Pavlic
e08d88cccb [PATCH] s390: fix recovery failure of non-guestLAN devices
[patch 5/7] s390: fix recovery failure of non-guestLAN devices

From: Frank Pavlic <fpavlic@de.ibm.com>
	- Recovery of non-guestLAN Layer 2 device failed due to
	  trying to register the real MAC address we got from
	  the READ_MAC adapter parameters command.
	  We have to keep the "old" MAC address when we process
	  the reply of a READ_MAC.

Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com>

diffstat:
 qeth.h      |   12 ++++++------
 qeth_main.c |   27 ++++++++++++++++-----------
 2 files changed, 22 insertions(+), 17 deletions(-)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-11 08:26:22 -05:00
Frank Pavlic
d805d7c692 [PATCH] s390: some more qeth fixes
[patch 4/7] s390: some more qeth fixes

From: Frank Pavlic <fpavlic@de.ibm.com>
From: Peter Tiedemann <ptiedem@de.ibm.com>
	- possible race on list fixed by reset
	  list processing after every operation
	- traffic hang fixed

Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com>

diffstat:
 qeth_main.c |   11 +++++++----
 1 files changed, 7 insertions(+), 4 deletions(-)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-11 08:26:21 -05:00
Frank Pavlic
6c88ad2ded [PATCH] s390: qeth multicast address registration fixed
[patch 3/7] s390: qeth multicast address registration fixed

From: Klaus Dieter Wacker <kdwacker@de.ibm.com>
	- when running in Layer2 mode we don't have to register
	  the multicast IP address but only group mac address.
	  Therefore for Layer 2 devices it is enough to go
	  through dev->mc_list list and register these entries.

Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com>

diffstat:
 qeth_main.c |  106 +++++++++++++++++++++++++++++++++++++++++++++---------------
 1 files changed, 80 insertions(+), 26 deletions(-)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-11 08:26:21 -05:00
Frank Pavlic
508cc2b0e0 [PATCH] s390: minor modification in qeth layer2 code
[patch 2/7] s390: minor modification in qeth layer2 code

From: Frank Pavlic <fpavlic@de.ibm.com>
	- use qeth_layer2_send_setdelvlan_cb to check
	  return code of a SET/DELVLAN IP Assist command.
	  It fits better in qeth's design and mechanism of IP Assist
	  command handling.

Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com>

diffstat:
 qeth_main.c |   40 ++++++++++++++++++++++++++--------------
 1 files changed, 26 insertions(+), 14 deletions(-)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-11 08:26:21 -05:00
Frank Pavlic
bd389b9059 [PATCH] s390: synthax checking for VIPA addresses fixed
[patch 1/7] s390: synthax checking for VIPA addresses fixed

From: Peter Tiedemann <ptiedem@de.ibm.com>
	- synthax checking for VIPA addresses fixed

Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com>

diffstat:
 qeth.h     |   65 ++++++++++++++++++++++++++++++++++++++++++++++++-------------
 qeth_sys.c |    6 ++---
 2 files changed, 55 insertions(+), 16 deletions(-)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-11 08:26:21 -05:00
Olaf Hering
733482e445 [PATCH] changing CONFIG_LOCALVERSION rebuilds too much, for no good reason
This patch removes almost all inclusions of linux/version.h.  The 3
#defines are unused in most of the touched files.

A few drivers use the simple KERNEL_VERSION(a,b,c) macro, which is
unfortunatly in linux/version.h.

There are also lots of #ifdef for long obsolete kernels, this was not
touched.  In a few places, the linux/version.h include was move to where
the LINUX_VERSION_CODE was used.

quilt vi `find * -type f -name "*.[ch]"|xargs grep -El '(UTS_RELEASE|LINUX_VERSION_CODE|KERNEL_VERSION|linux/version.h)'|grep -Ev '(/(boot|coda|drm)/|~$)'`

search pattern:
/UTS_RELEASE\|LINUX_VERSION_CODE\|KERNEL_VERSION\|linux\/\(utsname\|version\).h

Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 07:55:57 -08:00
Adrian Bunk
4448aaf0fa [PATCH] s390: "extern inline" -> "static inline"
"extern inline" -> "static inline"

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 07:55:52 -08:00
Jesper Juhl
17fd682e54 [PATCH] kfree cleanup: drivers/s390
This is the drivers/s390/ part of the big kfree cleanup patch.

Remove pointless checks for NULL prior to calling kfree() in drivers/s390/.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Acked-by: Cornelia Huck <cohuck@de.ibm.com>
Acked-by: Stefan Bader <Stefan.Bader@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:54:03 -08:00
Christian Borntraeger
a5da866fe0 [PATCH] s390: fix memory leak in vmcp
If vmcp is interrupted by a signal the vmcp command buffer is not freed.
Found by Pete Zaitcev.

Signed-off-by: Christian Borntraeger <cborntra@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:34 -08:00
Ursula Braun-Krahl
cdb32dc90b [PATCH] s390: duplicate timeout in qdio
Remove duplicate timeout in qdio_establish().

Signed-off-by: Ursula Braun-Krahl <braunu@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:34 -08:00
Peter Oberparleiter
1e0291bade [PATCH] s390: dasd diag with block sizes > 512
Access to FBA disks via DIAG fails for block sizes > 512 byte.  The device
analysis code of the DIAG discipline does not properly initialize the DIAG250
device environment after completion of the analysis.  This results in VM only
serving 512 bytes per block I/O request whereas Linux expects larger block
sizes.  Add proper device environment setup to end of analysis code.

Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:34 -08:00
Peter Oberparleiter
86b368a580 [PATCH] s390: dasd diag inline assembly
Future versions of gcc may remove initialization code for control blocks used
by the diag250 inline assembly due to incompletely specified constraints.
This may lead to erratic behavior.  Fix the diag250 inline assembly
constraints.

Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:34 -08:00
Cornelia Huck
a0016408f2 [PATCH] s390: ccwgroup online attribute
Make the interface for setting ccw group devices on-/offline consistent with
that for ccw devices: Check if the device driver provided a set_{on,off}line
function and just set the device on-/offline if not.

Signed-off-by: Cornelia Huck <cohuck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:33 -08:00
Tim Schmielau
4e57b68178 [PATCH] fix missing includes
I recently picked up my older work to remove unnecessary #includes of
sched.h, starting from a patch by Dave Jones to not include sched.h
from module.h. This reduces the number of indirect includes of sched.h
by ~300. Another ~400 pointless direct includes can be removed after
this disentangling (patch to follow later).
However, quite a few indirect includes need to be fixed up for this.

In order to feed the patches through -mm with as little disturbance as
possible, I've split out the fixes I accumulated up to now (complete for
i386 and x86_64, more archs to follow later) and post them before the real
patch.  This way this large part of the patch is kept simple with only
adding #includes, and all hunks are independent of each other.  So if any
hunk rejects or gets in the way of other patches, just drop it.  My scripts
will pick it up again in the next round.

Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 17:37:32 -08:00
Bastian Blank
f1fc78a8c7 [PATCH] s390, ccw - export modalias
This patch exports modalias for ccw devices.

So you can do:
 	modprobe `echo /sys/device/path_to_device/modalias`
and the proper driver will automatically be loaded by userspace.

Signed-off-by: Bastian Blank <waldi@debian.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 17:37:16 -08:00
Richard Hitt
ed3cb6f039 [PATCH] s390: 3270 fullscreen view
Martin Schwidefsky <schwidefsky@de.ibm.com>

Fix fullscreen view of the 3270 device driver.

Signed-off-by: Richard Hitt <rbh00@utsglobal.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 17:37:16 -08:00
Al Viro
f6b52e85a5 [PATCH] arguments out of order in class_device_create() call (s390)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-29 10:35:07 -07:00
Greg KH
6fbfddcb52 Merge ../bleed-2.6 2005-10-28 10:13:16 -07:00
Greg Kroah-Hartman
53f4654272 [PATCH] Driver Core: fix up all callers of class_device_create()
The previous patch adding the ability to nest struct class_device
changed the paramaters to the call class_device_create().  This patch
fixes up all in-kernel users of the function.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 09:52:52 -07:00
Linus Torvalds
e5dfa9282f Merge branch 'upstream' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 2005-10-28 09:05:25 -07:00
Al Viro
b4e3ca1ab1 [PATCH] gfp_t: remaining bits of drivers/*
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-28 08:16:51 -07:00
Jeff Garzik
59aee3c2a1 Merge branch 'master' 2005-10-13 21:22:27 -04:00
Cornelia Huck
e5945b4f60 [PATCH] s390: ccw device reconnect oops.
Search for a disconnect ccw_device on the ccw bus rather than on the css
bus (was a typo in patch I did for the klist conversion).  A cast to an
embedding ccw_device from an embedded device in a struct subchannel will
lead us to oopses.

Signed-off-by: Cornelia Huck <cohuck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-11 09:46:53 -07:00
Al Viro
dd0fc66fb3 [PATCH] gfp flags annotations - part 1
- added typedef unsigned int __nocast gfp_t;

 - replaced __nocast uses for gfp flags with gfp_t - it gives exactly
   the same warnings as far as sparse is concerned, doesn't change
   generated code (from gcc point of view we replaced unsigned int with
   typedef) and documents what's going on far better.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-08 15:00:57 -07:00
Ursula Braun
500f83abdc [PATCH] s390: introducing support in qeth for new OSA CHPID type OSN
This patch introduces new feature in qeth:
	qeth enhancement provides the device driver support for
        the Communication Controller for Linux on System z9 and zSeries
        (CCL), which is software that enables running the Network Control
        Program (NCP) on a zSeries machine. The OSA CDLC support is based
        on a new IBM mainframe CHPID type called Open Systems Adaper for
        NCP (OSN). In case of OSN qeth communicates with the type-OSN
        OSA-card on one hand, and with the CCL-kernel-component Network
        Device Handler (NDH) on the other.

Signed-off-by: Frank Pavlic <pavlic@de.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-03 22:06:46 -04:00
Ursula Braun
9123e0d789 [PATCH] s390: qeth driver fixes
From: Peter Tiedemann <ptiedem@de.ibm.com>
From: Frank Pavlic <pavlic@de.ibm.com>
	minor qeth fixes:
	- free old skb in qeth_realloc_headroom after duplicating skb
	- disable IPV6 support for Hipersockets devices
	- call ccw_device_set_offline on every channel regardless
	  of the return value of the prior ccw_device_set_offline calls
	- allocate qdio structures in DMA-area
	- schedule recovery of appropriate card
	  when cable has been inserted again.
	- add missing initialization of card->lock
	- write sequence number in skb->cb for SNA protocol which
	  requires strictly serialized packets.

Signed-off-by: Frank Pavlic <pavlic@de.ibm.com>

diffstat:
 qeth.h      |    2 ++
 qeth_main.c |   37 +++++++++++++++++--------------------
 2 files changed, 19 insertions(+), 20 deletions(-)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-03 22:05:38 -04:00
Herbert Xu
e5ed639913 [IPV4]: Replace __in_dev_get with __in_dev_get_rcu/rtnl
The following patch renames __in_dev_get() to __in_dev_get_rtnl() and
introduces __in_dev_get_rcu() to cover the second case.

1) RCU with refcnt should use in_dev_get().
2) RCU without refcnt should use __in_dev_get_rcu().
3) All others must hold RTNL and use __in_dev_get_rtnl().

There is one exception in net/ipv4/route.c which is in fact a pre-existing
race condition.  I've marked it as such so that we remember to fix it.

This patch is based on suggestions and prior work by Suzanne Wood and
Paul McKenney.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-03 14:35:55 -07:00
Daniel Ritz
d305ef5d2a [PATCH] driver core: add helper device_is_registered()
add the helper and use it instead of open coding the klist_node_attached() check
(which is a layering violation IMHO)

idea by Alan Stern.

Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22 07:58:24 -07:00
Linus Torvalds
9600c11ba3 Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-for-linus-2.6 2005-09-20 08:50:49 -07:00
Andreas Herrmann
13e1e1f08c [SCSI] zfcp: add additional fc_host attributes
this patch adds some fc host attributes and removes its equivalents
from the zfcp_adapter structure and zfcp specific sysfs subtree.

Furthermore it removes superfluous calls to fc_remort_port_delete when
an adapter is set offline because rports will be removed by
fc_remove_host anyway.

Signed-off-by: Andreas Herrmann <aherrman@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-19 13:04:15 -05:00
Maxim Shchetynin
aef4a98309 [SCSI] zfcp: provide support for NPIV
N_Port ID Virtualization (NPIV) allows a single FCP port to appear as
multiple, distinct ports providing separate port identification. NPIV
is supported by FC HBAs on System z9. zfcp was adapted to support this
new feature.

Signed-off-by: Andreas Herrmann <aherrman@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-19 13:03:45 -05:00
Maxim Shchetynin
8a36e4532e [SCSI] zfcp: enhancement of zfcp debug features
Debug features (DBFs) els_dbf, cmd_dbf and abt_dbf were removed and
san_dbf, hba_dbf and scsi_dbf were introduced. The erp_dbf did not
change.
The new traces improve debugging of problems with zfcp, scsi-stack,
multipath and hardware in the SAN. san_dbf traces things like ELS and
CT commands, hba_dbf saves HBA specific information of requests, and
scsi_dbf saves FCP and SCSI specific information of requests. Common
to all new DBFs is that they provide a so called structured view. This
significantly improves readability of the traces.

Signed-off-by: Andreas Herrmann <aherrman@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-19 13:03:00 -05:00
Andreas Herrmann
810f1e3ea5 [SCSI] zfcp: shorten eh_bus_reset and eh_host_reset handlers
Signed-off-by: Andreas Herrmann <aherrman@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-19 13:02:21 -05:00
Andreas Herrmann
77eb1699c7 [SCSI] zfcp: remove function zfcp_fsf_req_wait_and_cleanup
Signed-off-by: Andreas Herrmann <aherrman@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-19 13:01:53 -05:00
Andreas Herrmann
059c97d043 [SCSI] zfcp: remove union zfcp_req_data, use unit refcount for FCP commands
o union zfcp_req_data removed
o increment unit refcount when processing FCP commands
 (This fixes a theoretical race: When all scsi commands of a unit
  are aborted and the scsi_device is removed then the unit could be
  removed before all fsf_requests of that unit are completely processed.)

Signed-off-by: Andreas Herrmann <aherrman@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-19 13:01:23 -05:00
Andreas Herrmann
3734d24b2e [SCSI] zfcp: fix race conditions when accessing erp_action lists
o always use locking when changing erp_action lists,
o avoid escalation to ERP_ACTION_REOPEN_PORT_FORCED if erp_action is
  still in use for ERP_ACTION_REOPEN_PORT

Signed-off-by: Andreas Herrmann <aherrman@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-19 13:00:50 -05:00
Martin Schwidefsky
90f4e12112 [PATCH] s390: crypto driver patch take 2
Got confused with the crypto update.  The last patch added a call to
destroy_workqueue() for a non-existent workqueue with the comment "Remove
device workqueue on module unload".  This is nonsense.  Remove the offending
hunk again.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-17 11:49:58 -07:00
Heiko Carstens
d176795b3e [PATCH] s390: bl_dev array size
Calculate correct size for bl_dev array.  It should be 8KB instead of 512KB
for 2^16 bits.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-17 11:49:58 -07:00
Frank Pavlic
f3d242e8f2 [PATCH] s390: qeth driver fixes
[patch 4/4] s390: qeth driver fixes .

From: Frank Pavlic <pavlic@de.ibm.com>
	- Clear read channel first prior to using ccw_device_set_offline.
	- use QETH_DBF_TEXT instead of QETH_DBF_SPRINTF
	- invoke qeth_halt_channel and qeth_clear_channel for all channels,
	  even if halt/clear for one of the channel fails.
	- enable qeth_arp_query function for GuestLAN devices

Signed-off-by: Frank Pavlic <pavlic@de.ibm.com>

diffstat:
 qeth.h      |    2 -
 qeth_main.c |  106 +++++++++++++++++++++++++-----------------------------------
 qeth_sys.c  |   11 +++---
 3 files changed, 53 insertions(+), 66 deletions(-)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-14 12:15:31 -04:00
Frank Pavlic
9cb90de84b [PATCH] s390: TSO related fixes in qeth driver
Jeff,
I'm sorry seems that they have not been sent out either ...
ok here they come ...

[patch 3/4] s390: TSO related fixes in qeth driver

From: Frank Pavlic <pavlic@de.ibm.com>
	TSO related fixes :
	  - changing value of large_send attribute while network traffic
	    is running caused program check and thus device recovery.
	  - Due to hardware restriction discard packet when it exceeds 60K
	    otherwise qeth will cause program checks and thus traffic stall
	    when trying to send such huge packets.

Signed-off-by: Frank Pavlic <pavlic@de.ibm.com>

diffstat:
 qeth.h      |    4 ++--
 qeth_main.c |   33 +++++++++++++++++++++------------
 qeth_sys.c  |   10 +++-------
 3 files changed, 26 insertions(+), 21 deletions(-)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-14 12:15:31 -04:00
Frank Pavlic
e172577da0 [PATCH] s390: ctc driver fixes
Jeff,
sorry if I have flooded your inbox, I had some problems with the
mail server here yesterday, but it seems to be fixed ...
Ok patch 3-4 have no dependencies on patch 2 since only qeth driver is
affected.Thus I have made a new patch 2 for ctc driver.
Thank you .

[patch 2/4] s390: ctc driver fixes

From: Peter Tiedemann <ptiedem@de.ibm.com>
	- race condition fixed
	- minor cleanup

Signed-off-by: Peter Tiedemann <ptiedem@de.ibm.com>
Signed-off-by: Frank Pavlic <pavlic@de.ibm.com>

diffstat:
 ctcmain.c |   41 ++++++++++++++++++++++-------------------
 1 files changed, 22 insertions(+), 19 deletions(-)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-14 08:41:14 -04:00
Frank Pavlic
8e84c801ba [PATCH] s390: claw driver fixes
[patch 1/4] s390: claw driver fixes

From: Andy Richter <richtera@us.ibm.com>
	- change memory allocation and move dbf from proc to debugfs
	- use dev_kfree_skb_any instead of dev_kfree_skb_irq

Signed-off-by: Frank Pavlic <pavlic@de.ibm.com>

diffstat:
 claw.c |   20 ++++++++++----------
 1 files changed, 10 insertions(+), 10 deletions(-)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-06 22:15:20 -04:00
Martin Schwidefsky
3863e72414 [PATCH] s390: disconnected 3270 console
Fix reboot with a disconnected 3270 console.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:29 -07:00
Eric Rossman
2dee702fcb [PATCH] s390: crypto driver update
crypto device driver update:

 - Suppress syslog messages for some return codes.

 - Fix incorrect bounds checking in /proc interface.

 - Remove hotplug calls.

 - Remove linux version checks.

 - Remove device workqueue on module unload.

Signed-off-by: Eric Rossman <edrossma@us.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:29 -07:00
Cornelia Huck
4c24da79e2 [PATCH] s390: reIPL fix and extern/static inline
Common i/o layer changes:

- Collect the irb at the correct subchannel when waiting for the clear
  interrupt during subchannel cleaning befor reIPL - don't stop at the first
  interrupt that comes in.

- Change "extern __inline__" to "static inline".

- Remove unneeded qdio includes.

Signed-off-by: Cornelia Huck <cohuck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:28 -07:00
Horst Hummel
fd49f41aa0 [PATCH] s390: 64 bit diag250 support
Add support for diag 250 access to dasd devices for 64 bit kernels.  In
addition fix detach/attach for diag disks.  The VM control block needs to get
recreated by a call to mdsk_init_io.

Signed-off-by: Horst Hummel <horst.hummel@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:27 -07:00
Horst Hummel
c6eb7b7703 [PATCH] s390: deadlock in dasd_devmap
Reintroduce a read-only copy of the devmap features in the device struct.
This is necessary to solve a deadlock on the dasd_devmap_lock which is
acquired by dasd_get_features called from the dasd tasklet.  The current
implementation of devmap doesn't allow to call any devmap function from
interrupt or softirq context.

Signed-off-by: Horst Hummel <horst.hummel@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:26 -07:00
Martin Schwidefsky
ae6aa2ea89 [PATCH] s390: machine check handler bugs
The new machine check handler still has a few bugs.

1) The system entry time has to be stored in the machine check handler,

2) the machine check return psw may not be stored at the usual place
   because it might overwrite the return psw of the interrupted context,

3) the return address for the call to s390_handle_mcck in the i/o interrupt
   handler is not correct,

4) the system call cleanup has to take the different save area of the
   machine check handler into account,

5) the machine check handler may not call UPDATE_VTIME before
   CREATE_STACK_FRAME, and

6) the io leave path needs a critical section cleanup to make sure that the
   TIF_MCCK_PENDING bit is really checked before switching back to user space.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:25 -07:00
Heiko Carstens
20b1730af3 [PATCH] zfcp: bugfix and compile fixes
Bugfix (usage of uninitialized pointer in zfcp_port_dequeue) and compile
fixes for the zfcp device driver.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: James Bottomley <James.Bottomley@steeleye.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-28 13:53:48 -07:00
Alexey Dobriyan
7f84f22638 [PATCH] zfcp: fix compilation due to rports changes
struct zfcp_port::scsi_id was removed by commit
  3859f6a248

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-28 10:43:18 -07:00
Andreas Herrmann
3859f6a248 [PATCH] zfcp: add rports to enable scsi_add_device to work again
This patch fixes a severe problem with 2.6.13-rc7.

Due to recent SCSI changes it is not possible to add any LUNs to the zfcp
device driver anymore.  With registration of remote ports this is fixed.

Signed-off-by: Andreas Herrmann <aherrman@de.ibm.com>
Acked-by: James Bottomley <jejb@steeleye.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-27 11:22:36 -07:00
Al Viro
a46206e74e [PATCH] bogus function type in qdio
In qdio_get_micros() volatile in return type is plain noise (even with old
gccisms it would make no sense - noreturn function returning __u64 is a
bit odd ;-)

Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-26 16:30:30 -07:00
Al Viro
17566c3c5e [PATCH] s390 __CHECKER__ ifdefs
remove the bogus games with explicit ifdefs on __CHECKER__

Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-23 18:43:46 -07:00
Al Viro
ade31f38f2 [PATCH] typo fix in qdio.c
dumb typo: u32 volatile * mistyped as u32 * volatile

Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-23 18:43:45 -07:00
Cornelia Huck
66aea23ff8 [PATCH] s390: use klist in qeth driver
From: Martin Schwidesky <schwidefsky@de.ibm.com>

Convert qeth to the new klist interface and make it compiling again.

Signed-off-by: Frank Pavlic <pavlic@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-08 11:49:57 -07:00
Cornelia Huck
4ffa92340b [PATCH] s390: device recognition
Close a small window where a device may be not operational again after senseid
finished and the "same device" check fails due to dev=0000 by checking for dnv
after stsch() by then setting the device to not operational.  (No need to
check for dnv in ccw_device_handle_oper() again since we don't do stsch() into
the subchannel's schib in the meantime and will get a crw anyway if the device
becomes not oper again).

Signed-off-by: Cornelia Huck <cohuck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-29 15:01:14 -07:00
Jesper Juhl
77933d7276 [PATCH] clean up inline static vs static inline
`gcc -W' likes to complain if the static keyword is not at the beginning of
the declaration.  This patch fixes all remaining occurrences of "inline
static" up with "static inline" in the entire kernel tree (140 occurrences in
47 files).

While making this change I came across a few lines with trailing whitespace
that I also fixed up, I have also added or removed a blank line or two here
and there, but there are no functional changes in the patch.

Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27 16:26:20 -07:00
Christian Borntraeger
3e5ea09844 [PATCH] s390: use __cpcmd in vmcp_write
vmcp_write uses GPF_DMA for the memory allocation of the response buffer, so
it can use the low level function __cpcmd directly, no need to call the
wrapper.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27 16:26:06 -07:00
Stefan Bader
4111796d89 [PATCH] s390: channel tape fixes
Tape driver fixes:
 - Added deferred condition handling to tape driver core.
 - Added ability to handle busy conditions.
 - Code cleanup.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27 16:26:05 -07:00
Horst Hummel
6bb0e01081 [PATCH] s390: free dasd slab cache
Free dasd slab cache on module unload.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27 16:26:05 -07:00
Horst Hummel
d61f6f3d8b [PATCH] s390: fba dasd i/o errors
The FBA discipline does not use retries for failed requests.  A request fails
after the first unsuccessful start attempt.  There are some rare conditions
(e.g.  CIO path recovery) in which the start of an i/o on a fba device can
fail.  A tiny amount of retries is therefore reasonable.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27 16:26:05 -07:00
Cornelia Huck
c63307f164 [PATCH] s390: resource accessibility event handling
When processing resource accessibility events, continue searching for further
affected subchannels if a link address is provided in the event information.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27 16:26:05 -07:00
Cornelia Huck
1d3ac7aadb [PATCH] s390: debug data for ifcc/ccc
Fix debug data in case of an interface-control or channel-control check: don't
log the not yet accumulated interrupt-response-block, but the one we just
received.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27 16:26:04 -07:00
Andrey Panin
4bfdf37830 [PATCH] consolidate CONFIG_WATCHDOG_NOWAYOUT handling
Attached patch removes #ifdef CONFIG_WATCHDOG_NOWAYOUT mess duplicated in
almost every watchdog driver and replaces it with common define in
linux/watchdog.h.

Signed-off-by: Andrey Panin <pazke@donpac.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27 16:25:54 -07:00
Alexey Dobriyan
ab611487d8 [NET]: __be'ify *_type_trans()
tr_type_trans(), hippi_type_trans() left as-is.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-12 12:08:43 -07:00
David S. Miller
b03efcfb21 [NET]: Transform skb_queue_len() binary tests into skb_queue_empty()
This is part of the grand scheme to eliminate the qlen
member of skb_queue_head, and subsequently remove the
'list' member of sk_buff.

Most users of skb_queue_len() want to know if the queue is
empty or not, and that's trivially done with skb_queue_empty()
which doesn't use the skb_queue_head->qlen member and instead
uses the queue list emptyness as the test.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-08 14:57:23 -07:00
Michael Holzheu
66a464dbc8 [PATCH] s390: debug feature changes
This patch changes the memory allocation method for the s390 debug feature.
Trace buffers had been allocated using the get_free_pages() function before.
Therefore it was not possible to get big memory areas in a running system due
to memory fragmentation.  Now the trace buffers are subdivided into several
subbuffers with pagesize.  Therefore it is now possible to allocate more
memory for the trace buffers and more trace records can be written.

In addition to that, dynamic specification of the size of the trace buffers is
implemented.  It is now possible to change the size of a trace buffer using a
new debugfs file instance.  When writing a number into this file, the trace
buffer size is changed to 'number * pagesize'.

In the past all the traces could be obtained from userspace by accessing files
in the "proc" filesystem.  Now with debugfs we have a new filesystem which
should be used for debugging purposes.  This patch moves the debug feature
from procfs to debugfs.

Since the interface of debug_register() changed, all device drivers, which use
the debug feature had to be adjusted.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:37 -07:00
Christian Borntraeger
6b979de395 [PATCH] s390: add vmcp interface
Add interface to issue VM control program commands.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:37 -07:00
Heiko Carstens
77fa22450d [PATCH] s390: improved machine check handling
Improved machine check handling.  Kernel is now able to receive machine checks
while in kernel mode (system call, interrupt and program check handling).
Also register validation is now performed.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:37 -07:00
Cornelia Huck
f901e5d1e0 [PATCH] s/390: compile fix for dcssblk
Fix compile breakage in the dcss block driver introduced by the attribute
changes.

Signed-off-by: Cornelia Huck <cohuck@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:36 -07:00
Cornelia Huck
c551288e34 [PATCH] s/390: use klist in dasd driver
Convert the dasd driver to use the new klist interface.

Signed-off-by: Cornelia Huck <cohuck@de.ibm.com>
Cc: Greg KH <greg@kroah.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:36 -07:00
Cornelia Huck
b0744bd292 [PATCH] s/390: Use klist in cio
Convert the common I/O layer to use the klist interfaces.

This patch has been adapted from the previous version to the changed interface
semantics.  Also, gcc 4.0 compile warnings have been removed.

Signed-off-by: Cornelia Huck <cohuck@de.ibm.com>
Cc: Greg KH <greg@kroah.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:36 -07:00
Carsten Otte
420edbcc09 [PATCH] xip: bdev: execute in place
This is the block device related part.  The block device operation
direct_access now has a struct block_device as first parameter.

Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 00:06:41 -07:00
Cornelia Huck
5bdfcfcc07 [PATCH] s390: cio max channels checks
Fix max channel check in cio_ignore display function.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 19:07:32 -07:00
Yani Ioannou
10523b3b82 [PATCH] Driver Core: drivers/s390/net/qeth_sys.c - drivers/usb/gadget/pxa2xx_udc.c: update device attribute callbacks
Signed-off-by: Yani Ioannou <yani.ioannou@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:35 -07:00
Yani Ioannou
3fd3c0a5f5 [PATCH] Driver Core: drivers/char/raw3270.c - drivers/net/netiucv.c: update device attribute callbacks
Signed-off-by: Yani Ioannou <yani.ioannou@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:34 -07:00
Yani Ioannou
e404e274f6 [PATCH] Driver Core: drivers/i2c/chips/w83781d.c - drivers/s390/block/dcssblk.c: update device attribute callbacks
Signed-off-by: Yani Ioannou <yani.ioannou@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:34 -07:00
gregkh@suse.de
56b2293595 [PATCH] class: convert drivers/* to use the new class api instead of class_simple
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:09 -07:00