Commit Graph

26 Commits

Author SHA1 Message Date
Eli Cohen
947b2a8083 mlx4_core: Wait 1 second after reset before accessing device
Put a 1000 msec delay after resetting the device before attempting to
do config cycles on it.  Not waiting causes system hangs on some
chipsets, e.g. Intel E7520, when the driver is loaded.

Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-08-13 08:47:44 -07:00
Jack Morgenstein
0172e2e14c mlx4_core: Remove kfree() in mlx4_mr_alloc() error flow
mlx4_mr_alloc() doesn't actually allocate mr (it just initializes the
pointer that the caller passes in), so it shouldn't free it if an
error occurs.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-28 08:30:45 -07:00
Roland Dreier
0981582dbf mlx4_core: Change command token on timeout
The FW command token is currently only updated on a command completion
event. This means that on command timeout, the same token will be
reused for new command, which results in a mess if the timed out
command *does* eventually complete.

This is the same change as the patch for mthca from Michael
S. Tsirkin <mst@dev.mellanox.co.il> that was just merged.  It seems
sensible to avoid gratuitous differences in FW command processing
between mthca and mlx4.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-20 21:19:43 -07:00
Jack Morgenstein
c9f2ba5ed2 IB/mlx4: Increase max outstanding RDMA reads as target
Change the maximum number of outstanding RDMA reads allowed as a
target from 4 to 16 to per QP.  This allows RDMA read operations to
pipeline better.

Pointed out by Dotan Barak and Sagi Rotem.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-17 20:50:50 -07:00
Jack Morgenstein
ee49bd9397 mlx4_core: Reset device when internal error is detected
Reset the device when an internal error is detected.

Also, detect errors by polling the error buffer rather than using
interrupts.  This is more robust and doesn't depend on MSI-X.  Remove
the old interrupt handler entirely, since we don't want to support two
mechanisms for detecting internal errors.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-17 18:37:42 -07:00
Jack Morgenstein
65541cb7cf IB/mlx4: Implement query SRQ
Signed-off-by: Dotan Barak <dotanb@mellanox.co.il>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-12 15:41:24 -07:00
Jack Morgenstein
6a775e2ba4 IB/mlx4: Implement query QP
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-12 15:41:00 -07:00
Dotan Barak
149983af60 mlx4_core: Get the maximum message size from reported device capabilities
Get the maximum message size from the device capabilities returned
from the QUERY_DEV_CAP firmware command, rather than hard-coding 2 GB.

Signed-off-by: Dotan Barak <dotanb@dev.mellanox.co.il>
Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09 20:12:26 -07:00
Michael S. Tsirkin
525f5f44c4 mlx4_core: Include linux/mutex.h from mlx4.h
mlx4.h uses struct mutex, so although <linux/mutex.h> seems to be pulled in
indirectly by one of the headers it includes, the right thing to do is
to include <linux/mutex.h> directly.

Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09 20:12:20 -07:00
Bill Nottingham
287aa83dff drivers/net: fix comparisons of unsigned < 0
Recent gcc versions emit warnings when unsigned variables are compared < 0 or >= 0.

Signed-off-by: Bill Nottingham <notting@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-08 22:16:39 -04:00
Jack Morgenstein
786f238e4f mlx4_core: Add new Mellanox device IDs
Add new IDs for PCIe gen2 devices.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-02 20:41:35 -07:00
Roland Dreier
5ae2a7a836 IB/mlx4: Handle FW command interface rev 3
Upcoming firmware introduces command interface revision 3, which
changes the way port capabilities are queried and set.  Update the
driver to handle both the new and old command interfaces by adding a
new MLX4_FLAG_OLD_PORT_CMDS that it is set after querying the firmware
interface revision and then using the correct interface based on the
setting of the flag.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-06-18 08:15:02 -07:00
Roland Dreier
0e6e741621 IB/mlx4: Handle new FW requirement for send request prefetching
New ConnectX firmware introduces FW command interface revision 2,
which requires that for each QP, a chunk of send queue entries (the
"headroom") is kept marked as invalid, so that the HCA doesn't get
confused if it prefetches entries that haven't been posted yet.  Add
code to the driver to do this, and also update the user ABI so that
userspace can request that the prefetcher be turned off for userspace
QPs (we just leave the prefetcher on for all kernel QPs).

Unfortunately, marking send queue entries this way is confuses older
firmware, so we change the driver to allow only FW command interface
revisions 2.  This means that users will have to update their firmware
to work with the new driver, but the firmware is changing quickly and
the old firmware has lots of other bugs anyway, so this shouldn't be too
big a deal.

Based on a patch from Jack Morgenstein <jackm@dev.mellanox.co.il>.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-06-18 08:13:48 -07:00
Jack Morgenstein
b2d9308ae4 mlx4_core: Don't set MTT address in dMPT entries with PA set
If a dMPT entry has the PA flag (direct physical address) set, then
the (unused) MTT base address field has to be set to 0.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-06-07 23:24:38 -07:00
Roland Dreier
fe40900f40 mlx4_core: Check firmware command interface revision
HCA firmware with incompatible changes to the FW commmand interface is
coming soon.  Add a check of the interface revision during
initialization and bail out if the firmware advertises a revision that
the driver doesn't know about.  This will avoid strange failures later
if the driver goes on using the wrong interface revision. 

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-06-07 23:24:36 -07:00
Roland Dreier
3e1db334dc IB/mthca, mlx4_core: Fix typo in comment
s/signifant/significant/

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-06-07 11:51:59 -07:00
Roland Dreier
2c5cb23558 mlx4_core: Free catastrophic error MSI-X interrupt with correct dev_id
We need to pass the same dev_id to free_irq() and request_irq().  When
using MSI-X, the MLX4_EQ_CATAS interrupt uses a different dev_id from
the other interrupts.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-06-07 11:51:58 -07:00
Roland Dreier
b581401ed0 mlx4_core: Initialize ctx_list and ctx_lock earlier
We may call mlx4_dispatch_event() before mlx4_register_device() is
called for a device, because for example a catastrophic error happens
immediately after we enable interrupts.  Therefore priv->ctx_list and
priv->ctx_lock need to be initialized earlier.

This bug was actually exposed by the MSI-X bug that returned IRQ numbers 
to drivers in reverse order, so that the first FW command 
interrupt looked to mlx4 like a catastrophic error.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-06-07 11:51:58 -07:00
Eli Cohen
09360d5408 mlx4_core: Fix CQ context layout
The reserved6 field should be 64 bits, not just 16 bits.  Without
this, the structure does not match the hardware layout on 32-bit
architectures: the db_rec_addr field ends up at offset 52 instead of
offset 56.  The bug slipped by because the alignment of __be64 members
ends up putting it in the right place on x86-64.

Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-06-07 11:51:57 -07:00
Roland Dreier
a2cb4a98f2 IB/mlx4: Fix last allocated object tracking in bitmap allocator
Set last allocated object to the object after the one just allocated
before ORing in the extra top bits.  Also handle the case where this
wraps around.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-29 16:07:09 -07:00
Roland Dreier
23c15c21d3 mlx4_core: Fix array overrun in dump_dev_cap_flags()
Don't overrun fname[] array when decoding device flags.

This was spotted by the Coverity checker (CID 1642).

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-19 08:51:57 -07:00
Al Viro
9cbe05c712 missing includes in mlx4
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Jeff Garzik <jeff@garzik.org>
Acked-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-15 18:56:37 -07:00
Linus Torvalds
de7860c3f3 Merge branch 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband:
  IPoIB/cm: Optimize stale connection detection
  IB/mthca: Set cleaned CQEs back to HW ownership when cleaning CQ
  IB/mthca: Fix posting >255 recv WRs for Tavor
  RDMA/cma: Add check to validate that cm_id is bound to a device
  RDMA/cma: Fix synchronization with device removal in cma_iw_handler
  RDMA/cma: Simplify device removal handling code
  IB/ehca: Disable scaling code by default, bump version number
  IB/ehca: Beautify sysfs attribute code and fix compiler warnings
  IB/ehca: Remove _irqsave, move #ifdef
  IB/ehca: Fix AQP0/1 QP number
  IB/ehca: Correctly set GRH mask bit in ehca_modify_qp()
  IB/ehca: Serialize hypervisor calls in ehca_register_mr()
  IB/ipath: Shadow the gpio_mask register
  IB/mlx4: Fix uninitialized spinlock for 32-bit archs
  mlx4_core: Remove unused doorbell_lock
  net: Trivial MLX4_DEBUG dependency fix.
2007-05-15 09:52:31 -07:00
Roland Dreier
20eebcf09c mlx4_core: Remove unused doorbell_lock
struct mlx4_priv.doorbell_lock is never used, so delete it.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-13 08:54:18 -07:00
Andrew Morton
4093785dd1 mlx4: don't use deprecated IRQ flags
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-11 17:53:31 -04:00
Roland Dreier
225c7b1fee IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters
Add an InfiniBand driver for Mellanox ConnectX adapters.  Because
these adapters can also be used as ethernet NICs and Fibre Channel 
HBAs, the driver is split into two modules: 
 
  mlx4_core: Handles low-level things like device initialization and 
    processing firmware commands.  Also controls resource allocation 
    so that the InfiniBand, ethernet and FC functions can share a 
    device without stepping on each other. 
 
  mlx4_ib: Handles InfiniBand-specific things; plugs into the 
    InfiniBand midlayer. 

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-08 18:00:38 -07:00