6aa140fa45
2391 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Ingo Molnar
|
b429f71bca |
Merge branch 'sched/urgent' into sched/core, to pick up fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
Srikar Dronamraju
|
6fd98e775f |
sched/numa: Avoid task migration for small NUMA improvement
If NUMA improvement from the task migration is going to be very minimal, then avoid task migration. Specjbb2005 results (8 warehouses) Higher bops are better 2 Socket - 2 Node Haswell - X86 JVMS Prev Current %Change 4 198512 205910 3.72673 1 313559 318491 1.57291 2 Socket - 4 Node Power8 - PowerNV JVMS Prev Current %Change 8 74761.9 74935.9 0.232739 1 214874 226796 5.54837 2 Socket - 2 Node Power9 - PowerNV JVMS Prev Current %Change 4 180536 189780 5.12031 1 210281 205695 -2.18089 4 Socket - 4 Node Power7 - PowerVM JVMS Prev Current %Change 8 56511.4 60370 6.828 1 104899 108100 3.05151 1/7 cases is regressing, if we look at events migrate_pages seem to vary the most especially in the regressing case. Also some amount of variance is expected between different runs of Specjbb2005. Some events stats before and after applying the patch. perf stats 8th warehouse Multi JVM 2 Socket - 2 Node Haswell - X86 Event Before After cs 13,818,546 13,801,554 migrations 1,149,960 1,151,541 faults 385,583 433,246 cache-misses 55,259,546,768 55,168,691,835 sched:sched_move_numa 2,257 2,551 sched:sched_stick_numa 9 24 sched:sched_swap_numa 512 904 migrate:mm_migrate_pages 2,225 1,571 vmstat 8th warehouse Multi JVM 2 Socket - 2 Node Haswell - X86 Event Before After numa_hint_faults 72692 113682 numa_hint_faults_local 62270 102163 numa_hit 238762 240181 numa_huge_pte_updates 48 36 numa_interleave 75 64 numa_local 238676 240103 numa_other 86 78 numa_pages_migrated 2225 1564 numa_pte_updates 98557 134080 perf stats 8th warehouse Single JVM 2 Socket - 2 Node Haswell - X86 Event Before After cs 3,173,490 3,079,150 migrations 36,966 31,455 faults 108,776 99,081 cache-misses 12,200,075,320 11,588,126,740 sched:sched_move_numa 1,264 1 sched:sched_stick_numa 0 0 sched:sched_swap_numa 0 0 migrate:mm_migrate_pages 899 36 vmstat 8th warehouse Single JVM 2 Socket - 2 Node Haswell - X86 Event Before After numa_hint_faults 21109 430 numa_hint_faults_local 17120 77 numa_hit 72934 71277 numa_huge_pte_updates 42 0 numa_interleave 33 22 numa_local 72866 71218 numa_other 68 59 numa_pages_migrated 915 23 numa_pte_updates 42326 0 perf stats 8th warehouse Multi JVM 2 Socket - 2 Node Power9 - PowerNV Event Before After cs 8,312,022 8,707,565 migrations 231,705 171,342 faults 310,242 310,820 cache-misses 402,324,573 136,115,400 sched:sched_move_numa 193 215 sched:sched_stick_numa 0 6 sched:sched_swap_numa 3 24 migrate:mm_migrate_pages 93 162 vmstat 8th warehouse Multi JVM 2 Socket - 2 Node Power9 - PowerNV Event Before After numa_hint_faults 11838 8985 numa_hint_faults_local 11216 8154 numa_hit 90689 93819 numa_huge_pte_updates 0 0 numa_interleave 1579 882 numa_local 89634 93496 numa_other 1055 323 numa_pages_migrated 92 169 numa_pte_updates 12109 9217 perf stats 8th warehouse Single JVM 2 Socket - 2 Node Power9 - PowerNV Event Before After cs 2,170,481 2,152,072 migrations 10,126 10,704 faults 160,962 164,376 cache-misses 10,834,845 3,818,437 sched:sched_move_numa 10 16 sched:sched_stick_numa 0 0 sched:sched_swap_numa 0 7 migrate:mm_migrate_pages 2 199 vmstat 8th warehouse Single JVM 2 Socket - 2 Node Power9 - PowerNV Event Before After numa_hint_faults 403 2248 numa_hint_faults_local 358 1666 numa_hit 25898 25704 numa_huge_pte_updates 0 0 numa_interleave 207 200 numa_local 25860 25679 numa_other 38 25 numa_pages_migrated 2 197 numa_pte_updates 400 2234 perf stats 8th warehouse Multi JVM 4 Socket - 4 Node Power7 - PowerVM Event Before After cs 110,339,633 93,330,595 migrations 4,139,812 4,122,061 faults 863,622 865,979 cache-misses 231,838,045,660 225,395,083,479 sched:sched_move_numa 2,196 2,372 sched:sched_stick_numa 33 24 sched:sched_swap_numa 544 769 migrate:mm_migrate_pages 2,469 1,677 vmstat 8th warehouse Multi JVM 4 Socket - 4 Node Power7 - PowerVM Event Before After numa_hint_faults 85748 91638 numa_hint_faults_local 66831 78096 numa_hit 242213 242225 numa_huge_pte_updates 0 0 numa_interleave 0 2 numa_local 242211 242219 numa_other 2 6 numa_pages_migrated 2376 1515 numa_pte_updates 86233 92274 perf stats 8th warehouse Single JVM 4 Socket - 4 Node Power7 - PowerVM Event Before After cs 59,331,057 51,487,271 migrations 552,019 537,170 faults 266,586 256,921 cache-misses 73,796,312,990 70,073,831,187 sched:sched_move_numa 981 576 sched:sched_stick_numa 54 24 sched:sched_swap_numa 286 327 migrate:mm_migrate_pages 713 726 vmstat 8th warehouse Single JVM 4 Socket - 4 Node Power7 - PowerVM Event Before After numa_hint_faults 14807 12000 numa_hint_faults_local 5738 5024 numa_hit 36230 36470 numa_huge_pte_updates 0 0 numa_interleave 0 0 numa_local 36228 36465 numa_other 2 5 numa_pages_migrated 703 726 numa_pte_updates 14742 11930 Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Jirka Hladky <jhladky@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1537552141-27815-7-git-send-email-srikar@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
Mel Gorman
|
05cbdf4f5c |
sched/numa: Limit the conditions where scan period is reset
migrate_task_rq_fair() resets the scan rate for NUMA balancing on every cross-node migration. In the event of excessive load balancing due to saturation, this may result in the scan rate being pegged at maximum and further overloading the machine. This patch only resets the scan if NUMA balancing is active, a preferred node has been selected and the task is being migrated from the preferred node as these are the most harmful. For example, a migration to the preferred node does not justify a faster scan rate. Similarly, a migration between two nodes that are not preferred is probably bouncing due to over-saturation of the machine. In that case, scanning faster and trapping more NUMA faults will further overload the machine. Specjbb2005 results (8 warehouses) Higher bops are better 2 Socket - 2 Node Haswell - X86 JVMS Prev Current %Change 4 203370 205332 0.964744 1 328431 319785 -2.63252 2 Socket - 4 Node Power8 - PowerNV JVMS Prev Current %Change 1 206070 206585 0.249915 2 Socket - 2 Node Power9 - PowerNV JVMS Prev Current %Change 4 188386 189162 0.41192 1 201566 213760 6.04963 4 Socket - 4 Node Power7 - PowerVM JVMS Prev Current %Change 8 59157.4 58736.8 -0.710985 1 105495 105419 -0.0720413 Some events stats before and after applying the patch. perf stats 8th warehouse Multi JVM 2 Socket - 2 Node Haswell - X86 Event Before After cs 13,825,492 14,285,708 migrations 1,152,509 1,180,621 faults 371,948 339,114 cache-misses 55,654,206,041 55,205,631,894 sched:sched_move_numa 1,856 843 sched:sched_stick_numa 4 6 sched:sched_swap_numa 428 219 migrate:mm_migrate_pages 898 365 vmstat 8th warehouse Multi JVM 2 Socket - 2 Node Haswell - X86 Event Before After numa_hint_faults 57146 26907 numa_hint_faults_local 51612 24279 numa_hit 238164 239771 numa_huge_pte_updates 16 0 numa_interleave 63 68 numa_local 238085 239688 numa_other 79 83 numa_pages_migrated 883 363 numa_pte_updates 67540 27415 perf stats 8th warehouse Single JVM 2 Socket - 2 Node Haswell - X86 Event Before After cs 3,288,525 3,202,779 migrations 38,652 37,186 faults 111,678 106,076 cache-misses 12,111,197,376 12,024,873,744 sched:sched_move_numa 900 931 sched:sched_stick_numa 0 0 sched:sched_swap_numa 5 1 migrate:mm_migrate_pages 714 637 vmstat 8th warehouse Single JVM 2 Socket - 2 Node Haswell - X86 Event Before After numa_hint_faults 18572 17409 numa_hint_faults_local 14850 14367 numa_hit 73197 73953 numa_huge_pte_updates 11 20 numa_interleave 25 25 numa_local 73138 73892 numa_other 59 61 numa_pages_migrated 712 668 numa_pte_updates 24021 27276 perf stats 8th warehouse Multi JVM 2 Socket - 2 Node Power9 - PowerNV Event Before After cs 8,451,543 8,474,013 migrations 202,804 254,934 faults 310,024 320,506 cache-misses 253,522,507 110,580,458 sched:sched_move_numa 213 725 sched:sched_stick_numa 0 0 sched:sched_swap_numa 2 7 migrate:mm_migrate_pages 88 145 vmstat 8th warehouse Multi JVM 2 Socket - 2 Node Power9 - PowerNV Event Before After numa_hint_faults 11830 22797 numa_hint_faults_local 11301 21539 numa_hit 90038 89308 numa_huge_pte_updates 0 0 numa_interleave 855 865 numa_local 89796 88955 numa_other 242 353 numa_pages_migrated 88 149 numa_pte_updates 12039 22930 perf stats 8th warehouse Single JVM 2 Socket - 2 Node Power9 - PowerNV Event Before After cs 2,049,153 2,195,628 migrations 11,405 11,179 faults 162,309 149,656 cache-misses 7,203,343 8,117,515 sched:sched_move_numa 22 49 sched:sched_stick_numa 0 0 sched:sched_swap_numa 0 0 migrate:mm_migrate_pages 1 5 vmstat 8th warehouse Single JVM 2 Socket - 2 Node Power9 - PowerNV Event Before After numa_hint_faults 1693 3577 numa_hint_faults_local 1669 3476 numa_hit 25177 26142 numa_huge_pte_updates 0 0 numa_interleave 194 358 numa_local 24993 26042 numa_other 184 100 numa_pages_migrated 1 5 numa_pte_updates 1577 3587 perf stats 8th warehouse Multi JVM 4 Socket - 4 Node Power7 - PowerVM Event Before After cs 94,515,937 100,602,296 migrations 4,203,554 4,135,630 faults 832,697 789,256 cache-misses 226,248,698,331 226,160,621,058 sched:sched_move_numa 1,730 1,366 sched:sched_stick_numa 14 16 sched:sched_swap_numa 432 374 migrate:mm_migrate_pages 1,398 1,350 vmstat 8th warehouse Multi JVM 4 Socket - 4 Node Power7 - PowerVM Event Before After numa_hint_faults 80079 47857 numa_hint_faults_local 68620 39768 numa_hit 241187 240165 numa_huge_pte_updates 0 0 numa_interleave 0 0 numa_local 241186 240165 numa_other 1 0 numa_pages_migrated 1347 1224 numa_pte_updates 80729 48354 perf stats 8th warehouse Single JVM 4 Socket - 4 Node Power7 - PowerVM Event Before After cs 63,704,961 58,515,496 migrations 573,404 564,845 faults 230,878 245,807 cache-misses 76,568,222,781 73,603,757,976 sched:sched_move_numa 509 996 sched:sched_stick_numa 31 10 sched:sched_swap_numa 182 193 migrate:mm_migrate_pages 541 646 vmstat 8th warehouse Single JVM 4 Socket - 4 Node Power7 - PowerVM Event Before After numa_hint_faults 8501 13422 numa_hint_faults_local 2960 5619 numa_hit 35526 36118 numa_huge_pte_updates 0 0 numa_interleave 0 0 numa_local 35526 36116 numa_other 0 2 numa_pages_migrated 539 616 numa_pte_updates 8433 13374 Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Jirka Hladky <jhladky@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1537552141-27815-5-git-send-email-srikar@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Srikar Dronamraju
|
3f9672baaa |
sched/numa: Reset scan rate whenever task moves across nodes
Currently task scan rate is reset when NUMA balancer migrates the task to a different node. If NUMA balancer initiates a swap, reset is only applicable to the task that initiates the swap. Similarly no scan rate reset is done if the task is migrated across nodes by traditional load balancer. Instead move the scan reset to the migrate_task_rq. This ensures the task moved out of its preferred node, either gets back to its preferred node quickly or finds a new preferred node. Doing so, would be fair to all tasks migrating across nodes. Specjbb2005 results (8 warehouses) Higher bops are better 2 Socket - 2 Node Haswell - X86 JVMS Prev Current %Change 4 200668 203370 1.3465 1 321791 328431 2.06345 2 Socket - 4 Node Power8 - PowerNV JVMS Prev Current %Change 1 204848 206070 0.59654 2 Socket - 2 Node Power9 - PowerNV JVMS Prev Current %Change 4 188098 188386 0.153112 1 200351 201566 0.606436 4 Socket - 4 Node Power7 - PowerVM JVMS Prev Current %Change 8 58145.9 59157.4 1.73959 1 103798 105495 1.63491 Some events stats before and after applying the patch. perf stats 8th warehouse Multi JVM 2 Socket - 2 Node Haswell - X86 Event Before After cs 13,912,183 13,825,492 migrations 1,155,931 1,152,509 faults 367,139 371,948 cache-misses 54,240,196,814 55,654,206,041 sched:sched_move_numa 1,571 1,856 sched:sched_stick_numa 9 4 sched:sched_swap_numa 463 428 migrate:mm_migrate_pages 703 898 vmstat 8th warehouse Multi JVM 2 Socket - 2 Node Haswell - X86 Event Before After numa_hint_faults 50155 57146 numa_hint_faults_local 45264 51612 numa_hit 239652 238164 numa_huge_pte_updates 36 16 numa_interleave 68 63 numa_local 239576 238085 numa_other 76 79 numa_pages_migrated 680 883 numa_pte_updates 71146 67540 perf stats 8th warehouse Single JVM 2 Socket - 2 Node Haswell - X86 Event Before After cs 3,156,720 3,288,525 migrations 30,354 38,652 faults 97,261 111,678 cache-misses 12,400,026,826 12,111,197,376 sched:sched_move_numa 4 900 sched:sched_stick_numa 0 0 sched:sched_swap_numa 1 5 migrate:mm_migrate_pages 20 714 vmstat 8th warehouse Single JVM 2 Socket - 2 Node Haswell - X86 Event Before After numa_hint_faults 272 18572 numa_hint_faults_local 186 14850 numa_hit 71362 73197 numa_huge_pte_updates 0 11 numa_interleave 23 25 numa_local 71299 73138 numa_other 63 59 numa_pages_migrated 2 712 numa_pte_updates 0 24021 perf stats 8th warehouse Multi JVM 2 Socket - 2 Node Power9 - PowerNV Event Before After cs 8,606,824 8,451,543 migrations 155,352 202,804 faults 301,409 310,024 cache-misses 157,759,224 253,522,507 sched:sched_move_numa 168 213 sched:sched_stick_numa 0 0 sched:sched_swap_numa 3 2 migrate:mm_migrate_pages 125 88 vmstat 8th warehouse Multi JVM 2 Socket - 2 Node Power9 - PowerNV Event Before After numa_hint_faults 4650 11830 numa_hint_faults_local 3946 11301 numa_hit 90489 90038 numa_huge_pte_updates 0 0 numa_interleave 892 855 numa_local 90034 89796 numa_other 455 242 numa_pages_migrated 124 88 numa_pte_updates 4818 12039 perf stats 8th warehouse Single JVM 2 Socket - 2 Node Power9 - PowerNV Event Before After cs 2,113,167 2,049,153 migrations 10,533 11,405 faults 142,727 162,309 cache-misses 5,594,192 7,203,343 sched:sched_move_numa 10 22 sched:sched_stick_numa 0 0 sched:sched_swap_numa 0 0 migrate:mm_migrate_pages 6 1 vmstat 8th warehouse Single JVM 2 Socket - 2 Node Power9 - PowerNV Event Before After numa_hint_faults 744 1693 numa_hint_faults_local 584 1669 numa_hit 25551 25177 numa_huge_pte_updates 0 0 numa_interleave 263 194 numa_local 25302 24993 numa_other 249 184 numa_pages_migrated 6 1 numa_pte_updates 744 1577 perf stats 8th warehouse Multi JVM 4 Socket - 4 Node Power7 - PowerVM Event Before After cs 101,227,352 94,515,937 migrations 4,151,829 4,203,554 faults 745,233 832,697 cache-misses 224,669,561,766 226,248,698,331 sched:sched_move_numa 617 1,730 sched:sched_stick_numa 2 14 sched:sched_swap_numa 187 432 migrate:mm_migrate_pages 316 1,398 vmstat 8th warehouse Multi JVM 4 Socket - 4 Node Power7 - PowerVM Event Before After numa_hint_faults 24195 80079 numa_hint_faults_local 21639 68620 numa_hit 238331 241187 numa_huge_pte_updates 0 0 numa_interleave 0 0 numa_local 238331 241186 numa_other 0 1 numa_pages_migrated 204 1347 numa_pte_updates 24561 80729 perf stats 8th warehouse Single JVM 4 Socket - 4 Node Power7 - PowerVM Event Before After cs 62,738,978 63,704,961 migrations 562,702 573,404 faults 228,465 230,878 cache-misses 75,778,067,952 76,568,222,781 sched:sched_move_numa 648 509 sched:sched_stick_numa 13 31 sched:sched_swap_numa 137 182 migrate:mm_migrate_pages 733 541 vmstat 8th warehouse Single JVM 4 Socket - 4 Node Power7 - PowerVM Event Before After numa_hint_faults 10281 8501 numa_hint_faults_local 3242 2960 numa_hit 36338 35526 numa_huge_pte_updates 0 0 numa_interleave 0 0 numa_local 36338 35526 numa_other 0 0 numa_pages_migrated 706 539 numa_pte_updates 10176 8433 Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Jirka Hladky <jhladky@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1537552141-27815-4-git-send-email-srikar@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Srikar Dronamraju
|
1327237a59 |
sched/numa: Pass destination CPU as a parameter to migrate_task_rq
This additional parameter (new_cpu) is used later for identifying if task migration is across nodes. No functional change. Specjbb2005 results (8 warehouses) Higher bops are better 2 Socket - 2 Node Haswell - X86 JVMS Prev Current %Change 4 203353 200668 -1.32036 1 328205 321791 -1.95427 2 Socket - 4 Node Power8 - PowerNV JVMS Prev Current %Change 1 214384 204848 -4.44809 2 Socket - 2 Node Power9 - PowerNV JVMS Prev Current %Change 4 188553 188098 -0.241311 1 196273 200351 2.07772 4 Socket - 4 Node Power7 - PowerVM JVMS Prev Current %Change 8 57581.2 58145.9 0.980702 1 103468 103798 0.318939 Brings out the variance between different specjbb2005 runs. Some events stats before and after applying the patch. perf stats 8th warehouse Multi JVM 2 Socket - 2 Node Haswell - X86 Event Before After cs 13,941,377 13,912,183 migrations 1,157,323 1,155,931 faults 382,175 367,139 cache-misses 54,993,823,500 54,240,196,814 sched:sched_move_numa 2,005 1,571 sched:sched_stick_numa 14 9 sched:sched_swap_numa 529 463 migrate:mm_migrate_pages 1,573 703 vmstat 8th warehouse Multi JVM 2 Socket - 2 Node Haswell - X86 Event Before After numa_hint_faults 67099 50155 numa_hint_faults_local 58456 45264 numa_hit 240416 239652 numa_huge_pte_updates 18 36 numa_interleave 65 68 numa_local 240339 239576 numa_other 77 76 numa_pages_migrated 1574 680 numa_pte_updates 77182 71146 perf stats 8th warehouse Single JVM 2 Socket - 2 Node Haswell - X86 Event Before After cs 3,176,453 3,156,720 migrations 30,238 30,354 faults 87,869 97,261 cache-misses 12,544,479,391 12,400,026,826 sched:sched_move_numa 23 4 sched:sched_stick_numa 0 0 sched:sched_swap_numa 6 1 migrate:mm_migrate_pages 10 20 vmstat 8th warehouse Single JVM 2 Socket - 2 Node Haswell - X86 Event Before After numa_hint_faults 236 272 numa_hint_faults_local 201 186 numa_hit 72293 71362 numa_huge_pte_updates 0 0 numa_interleave 26 23 numa_local 72233 71299 numa_other 60 63 numa_pages_migrated 8 2 numa_pte_updates 0 0 perf stats 8th warehouse Multi JVM 2 Socket - 2 Node Power9 - PowerNV Event Before After cs 8,478,820 8,606,824 migrations 171,323 155,352 faults 307,499 301,409 cache-misses 240,353,599 157,759,224 sched:sched_move_numa 214 168 sched:sched_stick_numa 0 0 sched:sched_swap_numa 4 3 migrate:mm_migrate_pages 89 125 vmstat 8th warehouse Multi JVM 2 Socket - 2 Node Power9 - PowerNV Event Before After numa_hint_faults 5301 4650 numa_hint_faults_local 4745 3946 numa_hit 92943 90489 numa_huge_pte_updates 0 0 numa_interleave 899 892 numa_local 92345 90034 numa_other 598 455 numa_pages_migrated 88 124 numa_pte_updates 5505 4818 perf stats 8th warehouse Single JVM 2 Socket - 2 Node Power9 - PowerNV Event Before After cs 2,066,172 2,113,167 migrations 11,076 10,533 faults 149,544 142,727 cache-misses 10,398,067 5,594,192 sched:sched_move_numa 43 10 sched:sched_stick_numa 0 0 sched:sched_swap_numa 0 0 migrate:mm_migrate_pages 6 6 vmstat 8th warehouse Single JVM 2 Socket - 2 Node Power9 - PowerNV Event Before After numa_hint_faults 3552 744 numa_hint_faults_local 3347 584 numa_hit 25611 25551 numa_huge_pte_updates 0 0 numa_interleave 213 263 numa_local 25583 25302 numa_other 28 249 numa_pages_migrated 6 6 numa_pte_updates 3535 744 perf stats 8th warehouse Multi JVM 4 Socket - 4 Node Power7 - PowerVM Event Before After cs 99,358,136 101,227,352 migrations 4,041,607 4,151,829 faults 749,653 745,233 cache-misses 225,562,543,251 224,669,561,766 sched:sched_move_numa 771 617 sched:sched_stick_numa 14 2 sched:sched_swap_numa 204 187 migrate:mm_migrate_pages 1,180 316 vmstat 8th warehouse Multi JVM 4 Socket - 4 Node Power7 - PowerVM Event Before After numa_hint_faults 27409 24195 numa_hint_faults_local 20677 21639 numa_hit 239988 238331 numa_huge_pte_updates 0 0 numa_interleave 0 0 numa_local 239983 238331 numa_other 5 0 numa_pages_migrated 1016 204 numa_pte_updates 27916 24561 perf stats 8th warehouse Single JVM 4 Socket - 4 Node Power7 - PowerVM Event Before After cs 60,899,307 62,738,978 migrations 544,668 562,702 faults 270,834 228,465 cache-misses 74,543,455,635 75,778,067,952 sched:sched_move_numa 735 648 sched:sched_stick_numa 25 13 sched:sched_swap_numa 174 137 migrate:mm_migrate_pages 816 733 vmstat 8th warehouse Single JVM 4 Socket - 4 Node Power7 - PowerVM Event Before After numa_hint_faults 11059 10281 numa_hint_faults_local 4733 3242 numa_hit 41384 36338 numa_huge_pte_updates 0 0 numa_interleave 0 0 numa_local 41383 36338 numa_other 1 0 numa_pages_migrated 815 706 numa_pte_updates 11323 10176 Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Jirka Hladky <jhladky@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1537552141-27815-3-git-send-email-srikar@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Srikar Dronamraju
|
a4739eca44 |
sched/numa: Stop multiple tasks from moving to the CPU at the same time
Task migration under NUMA balancing can happen in parallel. More than one task might choose to migrate to the same CPU at the same time. This can result in: - During task swap, choosing a task that was not part of the evaluation. - During task swap, task which just got moved into its preferred node, moving to a completely different node. - During task swap, task failing to move to the preferred node, will have to wait an extra interval for the next migrate opportunity. - During task movement, multiple task movements can cause load imbalance. This problem is more likely if there are more cores per node or more nodes in the system. Use a per run-queue variable to check if NUMA-balance is active on the run-queue. Specjbb2005 results (8 warehouses) Higher bops are better 2 Socket - 2 Node Haswell - X86 JVMS Prev Current %Change 4 200194 203353 1.57797 1 311331 328205 5.41995 2 Socket - 4 Node Power8 - PowerNV JVMS Prev Current %Change 1 197654 214384 8.46429 2 Socket - 2 Node Power9 - PowerNV JVMS Prev Current %Change 4 192605 188553 -2.10379 1 213402 196273 -8.02664 4 Socket - 4 Node Power7 - PowerVM JVMS Prev Current %Change 8 52227.1 57581.2 10.2516 1 102529 103468 0.915838 There is a regression on power 9 box. If we look at the details, that box has a sudden jump in cache-misses with this patch. All other parameters seem to be pointing towards NUMA consolidation. perf stats 8th warehouse Multi JVM 2 Socket - 2 Node Haswell - X86 Event Before After cs 13,345,784 13,941,377 migrations 1,127,820 1,157,323 faults 374,736 382,175 cache-misses 55,132,054,603 54,993,823,500 sched:sched_move_numa 1,923 2,005 sched:sched_stick_numa 52 14 sched:sched_swap_numa 595 529 migrate:mm_migrate_pages 1,932 1,573 vmstat 8th warehouse Multi JVM 2 Socket - 2 Node Haswell - X86 Event Before After numa_hint_faults 60605 67099 numa_hint_faults_local 51804 58456 numa_hit 239945 240416 numa_huge_pte_updates 14 18 numa_interleave 60 65 numa_local 239865 240339 numa_other 80 77 numa_pages_migrated 1931 1574 numa_pte_updates 67823 77182 perf stats 8th warehouse Single JVM 2 Socket - 2 Node Haswell - X86 Event Before After cs 3,016,467 3,176,453 migrations 37,326 30,238 faults 115,342 87,869 cache-misses 11,692,155,554 12,544,479,391 sched:sched_move_numa 965 23 sched:sched_stick_numa 8 0 sched:sched_swap_numa 35 6 migrate:mm_migrate_pages 1,168 10 vmstat 8th warehouse Single JVM 2 Socket - 2 Node Haswell - X86 Event Before After numa_hint_faults 16286 236 numa_hint_faults_local 11863 201 numa_hit 112482 72293 numa_huge_pte_updates 33 0 numa_interleave 20 26 numa_local 112419 72233 numa_other 63 60 numa_pages_migrated 1144 8 numa_pte_updates 32859 0 perf stats 8th warehouse Multi JVM 2 Socket - 2 Node Power9 - PowerNV Event Before After cs 8,629,724 8,478,820 migrations 221,052 171,323 faults 308,661 307,499 cache-misses 135,574,913 240,353,599 sched:sched_move_numa 147 214 sched:sched_stick_numa 0 0 sched:sched_swap_numa 2 4 migrate:mm_migrate_pages 64 89 vmstat 8th warehouse Multi JVM 2 Socket - 2 Node Power9 - PowerNV Event Before After numa_hint_faults 11481 5301 numa_hint_faults_local 10968 4745 numa_hit 89773 92943 numa_huge_pte_updates 0 0 numa_interleave 1116 899 numa_local 89220 92345 numa_other 553 598 numa_pages_migrated 62 88 numa_pte_updates 11694 5505 perf stats 8th warehouse Single JVM 2 Socket - 2 Node Power9 - PowerNV Event Before After cs 2,272,887 2,066,172 migrations 12,206 11,076 faults 163,704 149,544 cache-misses 4,801,186 10,398,067 sched:sched_move_numa 44 43 sched:sched_stick_numa 0 0 sched:sched_swap_numa 0 0 migrate:mm_migrate_pages 17 6 vmstat 8th warehouse Single JVM 2 Socket - 2 Node Power9 - PowerNV Event Before After numa_hint_faults 2261 3552 numa_hint_faults_local 1993 3347 numa_hit 25726 25611 numa_huge_pte_updates 0 0 numa_interleave 239 213 numa_local 25498 25583 numa_other 228 28 numa_pages_migrated 17 6 numa_pte_updates 2266 3535 perf stats 8th warehouse Multi JVM 4 Socket - 4 Node Power7 - PowerVM Event Before After cs 117,980,962 99,358,136 migrations 3,950,220 4,041,607 faults 736,979 749,653 cache-misses 224,976,072,879 225,562,543,251 sched:sched_move_numa 504 771 sched:sched_stick_numa 50 14 sched:sched_swap_numa 239 204 migrate:mm_migrate_pages 1,260 1,180 vmstat 8th warehouse Multi JVM 4 Socket - 4 Node Power7 - PowerVM Event Before After numa_hint_faults 18293 27409 numa_hint_faults_local 11969 20677 numa_hit 240854 239988 numa_huge_pte_updates 0 0 numa_interleave 0 0 numa_local 240851 239983 numa_other 3 5 numa_pages_migrated 1190 1016 numa_pte_updates 18106 27916 perf stats 8th warehouse Single JVM 4 Socket - 4 Node Power7 - PowerVM Event Before After cs 61,053,158 60,899,307 migrations 551,586 544,668 faults 244,174 270,834 cache-misses 74,326,766,973 74,543,455,635 sched:sched_move_numa 344 735 sched:sched_stick_numa 24 25 sched:sched_swap_numa 140 174 migrate:mm_migrate_pages 568 816 vmstat 8th warehouse Single JVM 4 Socket - 4 Node Power7 - PowerVM Event Before After numa_hint_faults 6461 11059 numa_hint_faults_local 2283 4733 numa_hit 35661 41384 numa_huge_pte_updates 0 0 numa_interleave 0 0 numa_local 35661 41383 numa_other 0 1 numa_pages_migrated 568 815 numa_pte_updates 6518 11323 Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Rik van Riel <riel@surriel.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: Jirka Hladky <jhladky@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1537552141-27815-2-git-send-email-srikar@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
zhong jiang
|
ace8031099 |
sched/topology: Make local variables static
Fix the following warnings: kernel/sched/topology.c:10:15: warning: symbol 'sched_domains_tmpmask' was not declared. Should it be static? kernel/sched/topology.c:11:15: warning: symbol 'sched_domains_tmpmask2' was not declared. Should it be static? Signed-off-by: zhong jiang <zhongjiang@huawei.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1533299852-26941-1-git-send-email-zhongjiang@huawei.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
Vincent Guittot
|
7477a3504e |
sched/numa: Remove unused numa_stats::nr_running field
nr_running in struct numa_stats is not used anywhere in the code. Remove it. Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1535548752-4434-3-git-send-email-vincent.guittot@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Vincent Guittot
|
d90707ebeb |
sched/numa: Remove unused code from update_numa_stats()
With:
commit
|
||
Peter Zijlstra
|
7e6f4c5d60 |
sched/debug: Explicitly cast sched_feat() to bool
LLVM has a warning that tags expressions like: if (foo && non-bool-const) This pattern triggers for CONFIG_SCHED_DEBUG=n where sched_feat() ends up being whatever bit we select. Avoid the warning with an explicit cast to bool. Reported-by: Philipp Klocke <philipp97kl@gmail.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
Morten Rasmussen
|
9c63e84db2 |
sched/core: Disable SD_PREFER_SIBLING on asymmetric CPU capacity domains
The 'prefer sibling' sched_domain flag is intended to encourage spreading tasks to sibling sched_domain to take advantage of more caches and core for SMT systems. It has recently been changed to be on all non-NUMA topology level. However, spreading across domains with CPU capacity asymmetry isn't desirable, e.g. spreading from high capacity to low capacity CPUs even if high capacity CPUs aren't overutilized might give access to more cache but the CPU will be slower and possibly lead to worse overall throughput. To prevent this, we need to remove SD_PREFER_SIBLING on the sched_domain level immediately below SD_ASYM_CPUCAPACITY. Signed-off-by: Morten Rasmussen <morten.rasmussen@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dietmar.eggemann@arm.com Cc: gaku.inami.xh@renesas.com Cc: valentin.schneider@arm.com Cc: vincent.guittot@linaro.org Link: http://lkml.kernel.org/r/1530699470-29808-13-git-send-email-morten.rasmussen@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
Chris Redpath
|
4ad3831a9d |
sched/fair: Don't move tasks to lower capacity CPUs unless necessary
When lower capacity CPUs are load balancing and considering to pull something from a higher capacity group, we should not pull tasks from a CPU with only one task running as this is guaranteed to impede progress for that task. If there is more than one task running, load balance in the higher capacity group would have already made any possible moves to resolve imbalance and we should make better use of system compute capacity by moving a task if we still have more than one running. Signed-off-by: Chris Redpath <chris.redpath@arm.com> Signed-off-by: Morten Rasmussen <morten.rasmussen@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dietmar.eggemann@arm.com Cc: gaku.inami.xh@renesas.com Cc: valentin.schneider@arm.com Cc: vincent.guittot@linaro.org Link: http://lkml.kernel.org/r/1530699470-29808-11-git-send-email-morten.rasmussen@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
Valentin Schneider
|
757ffdd705 |
sched/fair: Set rq->rd->overload when misfit
Idle balance is a great opportunity to pull a misfit task. However,
there are scenarios where misfit tasks are present but idle balance is
prevented by the overload flag.
A good example of this is a workload of n identical tasks. Let's suppose
we have a 2+2 Arm big.LITTLE system. We then spawn 4 fairly
CPU-intensive tasks - for the sake of simplicity let's say they are just
CPU hogs, even when running on big CPUs.
They are identical tasks, so on an SMP system they should all end at
(roughly) the same time. However, in our case the LITTLE CPUs are less
performing than the big CPUs, so tasks running on the LITTLEs will have
a longer completion time.
This means that the big CPUs will complete their work earlier, at which
point they should pull the tasks from the LITTLEs. What we want to
happen is summarized as follows:
a,b,c,d are our CPU-hogging tasks _ signifies idling
LITTLE_0 | a a a a _ _
LITTLE_1 | b b b b _ _
---------|-------------
big_0 | c c c c a a
big_1 | d d d d b b
^
^
Tasks end on the big CPUs, idle balance happens
and the misfit tasks are pulled straight away
This however won't happen, because currently the overload flag is only
set when there is any CPU that has more than one runnable task - which
may very well not be the case here if our CPU-hogging workload is all
there is to run.
As such, this commit sets the overload flag in update_sg_lb_stats when
a group is flagged as having a misfit task.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Morten Rasmussen <morten.rasmussen@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dietmar.eggemann@arm.com
Cc: gaku.inami.xh@renesas.com
Cc: vincent.guittot@linaro.org
Link: http://lkml.kernel.org/r/1530699470-29808-10-git-send-email-morten.rasmussen@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
||
|
Valentin Schneider
|
e90c8fe15a |
sched/fair: Wrap rq->rd->overload accesses with READ/WRITE_ONCE()
This variable can be read and set locklessly within update_sd_lb_stats(). As such, READ/WRITE_ONCE() are added to make sure nothing terribly wrong can happen because of the compiler. Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Morten Rasmussen <morten.rasmussen@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dietmar.eggemann@arm.com Cc: gaku.inami.xh@renesas.com Cc: vincent.guittot@linaro.org Link: http://lkml.kernel.org/r/1530699470-29808-9-git-send-email-morten.rasmussen@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Valentin Schneider
|
575638d104 |
sched/core: Change root_domain->overload type to int
sizeof(_Bool) is implementation defined, so let's just go with 'int' as is done for other structures e.g. sched_domain_shared->has_idle_cores. The local 'overload' variable used in update_sd_lb_stats can remain bool, as it won't impact any struct layout and can be assigned to the root_domain field. Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Morten Rasmussen <morten.rasmussen@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dietmar.eggemann@arm.com Cc: gaku.inami.xh@renesas.com Cc: vincent.guittot@linaro.org Link: http://lkml.kernel.org/r/1530699470-29808-8-git-send-email-morten.rasmussen@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Valentin Schneider
|
dbbad71944 |
sched/fair: Change 'prefer_sibling' type to bool
This variable is entirely local to update_sd_lb_stats, so we can safely change its type and slightly clean up its initialisation. Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Morten Rasmussen <morten.rasmussen@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dietmar.eggemann@arm.com Cc: gaku.inami.xh@renesas.com Cc: vincent.guittot@linaro.org Link: http://lkml.kernel.org/r/1530699470-29808-7-git-send-email-morten.rasmussen@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Valentin Schneider
|
5fbdfae522 |
sched/fair: Kick nohz balance if rq->misfit_task_load
There already are a few conditions in nohz_kick_needed() to ensure a nohz kick is triggered, but they are not enough for some misfit task scenarios. Excluding asym packing, those are: - rq->nr_running >=2: Not relevant here because we are running a misfit task, it needs to be migrated regardless and potentially through active balance. - sds->nr_busy_cpus > 1: If there is only the misfit task being run on a group of low capacity CPUs, this will be evaluated to False. - rq->cfs.h_nr_running >=1 && check_cpu_capacity(): Not relevant here, misfit task needs to be migrated regardless of rt/IRQ pressure As such, this commit adds an rq->misfit_task_load condition to trigger a nohz kick. The idea to kick a nohz balance for misfit tasks originally came from Leo Yan <leo.yan@linaro.org>, and a similar patch was submitted for the Android Common Kernel - see: https://lists.linaro.org/pipermail/eas-dev/2016-September/000551.html Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Morten Rasmussen <morten.rasmussen@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dietmar.eggemann@arm.com Cc: gaku.inami.xh@renesas.com Cc: vincent.guittot@linaro.org Link: http://lkml.kernel.org/r/1530699470-29808-6-git-send-email-morten.rasmussen@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Morten Rasmussen
|
cad68e552e |
sched/fair: Consider misfit tasks when load-balancing
On asymmetric CPU capacity systems load intensive tasks can end up on CPUs that don't suit their compute demand. In this scenarios 'misfit' tasks should be migrated to CPUs with higher compute capacity to ensure better throughput. group_misfit_task indicates this scenario, but tweaks to the load-balance code are needed to make the migrations happen. Misfit balancing only makes sense between a source group of lower per-CPU capacity and destination group of higher compute capacity. Otherwise, misfit balancing is ignored. group_misfit_task has lowest priority so any imbalance due to overload is dealt with first. The modifications are: 1. Only pick a group containing misfit tasks as the busiest group if the destination group has higher capacity and has spare capacity. 2. When the busiest group is a 'misfit' group, skip the usual average load and group capacity checks. 3. Set the imbalance for 'misfit' balancing sufficiently high for a task to be pulled ignoring average load. 4. Pick the CPU with the highest misfit load as the source CPU. 5. If the misfit task is alone on the source CPU, go for active balancing. Signed-off-by: Morten Rasmussen <morten.rasmussen@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dietmar.eggemann@arm.com Cc: gaku.inami.xh@renesas.com Cc: valentin.schneider@arm.com Cc: vincent.guittot@linaro.org Link: http://lkml.kernel.org/r/1530699470-29808-5-git-send-email-morten.rasmussen@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Morten Rasmussen
|
e3d6d0cb66 |
sched/fair: Add sched_group per-CPU max capacity
The current sg->min_capacity tracks the lowest per-CPU compute capacity available in the sched_group when rt/irq pressure is taken into account. Minimum capacity isn't the ideal metric for tracking if a sched_group needs offloading to another sched_group for some scenarios, e.g. a sched_group with multiple CPUs if only one is under heavy pressure. Tracking maximum capacity isn't perfect either but a better choice for some situations as it indicates that the sched_group definitely compute capacity constrained either due to rt/irq pressure on all CPUs or asymmetric CPU capacities (e.g. big.LITTLE). Signed-off-by: Morten Rasmussen <morten.rasmussen@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dietmar.eggemann@arm.com Cc: gaku.inami.xh@renesas.com Cc: valentin.schneider@arm.com Cc: vincent.guittot@linaro.org Link: http://lkml.kernel.org/r/1530699470-29808-4-git-send-email-morten.rasmussen@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Morten Rasmussen
|
3b1baa6496 |
sched/fair: Add 'group_misfit_task' load-balance type
To maximize throughput in systems with asymmetric CPU capacities (e.g.
ARM big.LITTLE) load-balancing has to consider task and CPU utilization
as well as per-CPU compute capacity when load-balancing in addition to
the current average load based load-balancing policy. Tasks with high
utilization that are scheduled on a lower capacity CPU need to be
identified and migrated to a higher capacity CPU if possible to maximize
throughput.
To implement this additional policy an additional group_type
(load-balance scenario) is added: 'group_misfit_task'. This represents
scenarios where a sched_group has one or more tasks that are not
suitable for its per-CPU capacity. 'group_misfit_task' is only considered
if the system is not overloaded or imbalanced ('group_imbalanced' or
'group_overloaded').
Identifying misfit tasks requires the rq lock to be held. To avoid
taking remote rq locks to examine source sched_groups for misfit tasks,
each CPU is responsible for tracking misfit tasks themselves and update
the rq->misfit_task flag. This means checking task utilization when
tasks are scheduled and on sched_tick.
Signed-off-by: Morten Rasmussen <morten.rasmussen@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dietmar.eggemann@arm.com
Cc: gaku.inami.xh@renesas.com
Cc: valentin.schneider@arm.com
Cc: vincent.guittot@linaro.org
Link: http://lkml.kernel.org/r/1530699470-29808-3-git-send-email-morten.rasmussen@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
||
|
Morten Rasmussen
|
df054e8445 |
sched/topology: Add static_key for asymmetric CPU capacity optimizations
The existing asymmetric CPU capacity code should cause minimal overhead for others. Putting it behind a static_key, it has been done for SMT optimizations, would make it easier to extend and improve without causing harm to others moving forward. Signed-off-by: Morten Rasmussen <morten.rasmussen@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dietmar.eggemann@arm.com Cc: gaku.inami.xh@renesas.com Cc: valentin.schneider@arm.com Cc: vincent.guittot@linaro.org Link: http://lkml.kernel.org/r/1530699470-29808-2-git-send-email-morten.rasmussen@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Morten Rasmussen
|
05484e0984 |
sched/topology: Add SD_ASYM_CPUCAPACITY flag detection
The SD_ASYM_CPUCAPACITY sched_domain flag is supposed to mark the sched_domain in the hierarchy where all CPU capacities are visible for any CPU's point of view on asymmetric CPU capacity systems. The scheduler can then take to take capacity asymmetry into account when balancing at this level. It also serves as an indicator for how wide task placement heuristics have to search to consider all available CPU capacities as asymmetric systems might often appear symmetric at smallest level(s) of the sched_domain hierarchy. The flag has been around for while but so far only been set by out-of-tree code in Android kernels. One solution is to let each architecture provide the flag through a custom sched_domain topology array and associated mask and flag functions. However, SD_ASYM_CPUCAPACITY is special in the sense that it depends on the capacity and presence of all CPUs in the system, i.e. when hotplugging all CPUs out except those with one particular CPU capacity the flag should disappear even if the sched_domains don't collapse. Similarly, the flag is affected by cpusets where load-balancing is turned off. Detecting when the flags should be set therefore depends not only on topology information but also the cpuset configuration and hotplug state. The arch code doesn't have easy access to the cpuset configuration. Instead, this patch implements the flag detection in generic code where cpusets and hotplug state is already taken care of. All the arch is responsible for is to implement arch_scale_cpu_capacity() and force a full rebuild of the sched_domain hierarchy if capacities are updated, e.g. later in the boot process when cpufreq has initialized. Signed-off-by: Morten Rasmussen <morten.rasmussen@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dietmar.eggemann@arm.com Cc: valentin.schneider@arm.com Cc: vincent.guittot@linaro.org Link: http://lkml.kernel.org/r/1532093554-30504-2-git-send-email-morten.rasmussen@arm.com [ Fixed 'CPU' capitalization. ] Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
Randy Dunlap
|
882a78a9f3 |
sched/fair: Fix kernel-doc notation warning
Fix kernel-doc warning for missing 'flags' parameter description:
../kernel/sched/fair.c:3371: warning: Function parameter or member 'flags' not described in 'attach_entity_load_avg'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes:
|
||
|
Vincent Guittot
|
bb3485c8ac |
sched/fair: Fix load_balance redo for !imbalance
It can happen that load_balance() finds a busiest group and then a busiest rq but the calculated imbalance is in fact 0. In such situation, detach_tasks() returns immediately and lets the flag LBF_ALL_PINNED set. The busiest CPU is then wrongly assumed to have pinned tasks and removed from the load balance mask. then, we redo a load balance without the busiest CPU. This creates wrong load balance situation and generates wrong task migration. If the calculated imbalance is 0, it's useless to try to find a busiest rq as no task will be migrated and we can return immediately. This situation can happen with heterogeneous system or smp system when RT tasks are decreasing the capacity of some CPUs. Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dietmar.eggemann@arm.com Cc: jhugo@codeaurora.org Link: http://lkml.kernel.org/r/1536306664-29827-1-git-send-email-vincent.guittot@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Vincent Guittot
|
287cdaac57 |
sched/fair: Fix scale_rt_capacity() for SMT
Since commit: |
||
Steve Muckle
|
d0cdb3ce88 |
sched/fair: Fix vruntime_normalized() for remote non-migration wakeup
When a task which previously ran on a given CPU is remotely queued to
wake up on that same CPU, there is a period where the task's state is
TASK_WAKING and its vruntime is not normalized. This is not accounted
for in vruntime_normalized() which will cause an error in the task's
vruntime if it is switched from the fair class during this time.
For example if it is boosted to RT priority via rt_mutex_setprio(),
rq->min_vruntime will not be subtracted from the task's vruntime but
it will be added again when the task returns to the fair class. The
task's vruntime will have been erroneously doubled and the effective
priority of the task will be reduced.
Note this will also lead to inflation of all vruntimes since the doubled
vruntime value will become the rq's min_vruntime when other tasks leave
the rq. This leads to repeated doubling of the vruntime and priority
penalty.
Fix this by recognizing a WAKING task's vruntime as normalized only if
sched_remote_wakeup is true. This indicates a migration, in which case
the vruntime would have been normalized in migrate_task_rq_fair().
Based on a similar patch from John Dias <joaodias@google.com>.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Steve Muckle <smuckle@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Chris Redpath <Chris.Redpath@arm.com>
Cc: John Dias <joaodias@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Miguel de Dios <migueldedios@google.com>
Cc: Morten Rasmussen <Morten.Rasmussen@arm.com>
Cc: Patrick Bellasi <Patrick.Bellasi@arm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Todd Kjos <tkjos@google.com>
Cc: kernel-team@android.com
Fixes:
|
||
|
Vincent Guittot
|
12b04875d6 |
sched/pelt: Fix update_blocked_averages() for RT and DL classes
update_blocked_averages() is called to periodiccally decay the stalled load of idle CPUs and to sync all loads before running load balance. When cfs rq is idle, it trigs a load balance during pick_next_task_fair() in order to potentially pull tasks and to use this newly idle CPU. This load balance happens whereas prev task from another class has not been put and its utilization updated yet. This may lead to wrongly account running time as idle time for RT or DL classes. Test that no RT or DL task is running when updating their utilization in update_blocked_averages(). We still update RT and DL utilization instead of simply skipping them to make sure that all metrics are synced when used during load balance. Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: |
||
|
Srikar Dronamraju
|
e5e96fafd9 |
sched/topology: Set correct NUMA topology type
With the following commit: |
||
Jiada Wang
|
e73e81975f |
sched/debug: Fix potential deadlock when writing to sched_features
The following lockdep report can be triggered by writing to /sys/kernel/debug/sched_features: ====================================================== WARNING: possible circular locking dependency detected 4.18.0-rc6-00152-gcd3f77d74ac3-dirty #18 Not tainted ------------------------------------------------------ sh/3358 is trying to acquire lock: 000000004ad3989d (cpu_hotplug_lock.rw_sem){++++}, at: static_key_enable+0x14/0x30 but task is already holding lock: 00000000c1b31a88 (&sb->s_type->i_mutex_key#3){+.+.}, at: sched_feat_write+0x160/0x428 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (&sb->s_type->i_mutex_key#3){+.+.}: lock_acquire+0xb8/0x148 down_write+0xac/0x140 start_creating+0x5c/0x168 debugfs_create_dir+0x18/0x220 opp_debug_register+0x8c/0x120 _add_opp_dev+0x104/0x1f8 dev_pm_opp_get_opp_table+0x174/0x340 _of_add_opp_table_v2+0x110/0x760 dev_pm_opp_of_add_table+0x5c/0x240 dev_pm_opp_of_cpumask_add_table+0x5c/0x100 cpufreq_init+0x160/0x430 cpufreq_online+0x1cc/0xe30 cpufreq_add_dev+0x78/0x198 subsys_interface_register+0x168/0x270 cpufreq_register_driver+0x1c8/0x278 dt_cpufreq_probe+0xdc/0x1b8 platform_drv_probe+0xb4/0x168 driver_probe_device+0x318/0x4b0 __device_attach_driver+0xfc/0x1f0 bus_for_each_drv+0xf8/0x180 __device_attach+0x164/0x200 device_initial_probe+0x10/0x18 bus_probe_device+0x110/0x178 device_add+0x6d8/0x908 platform_device_add+0x138/0x3d8 platform_device_register_full+0x1cc/0x1f8 cpufreq_dt_platdev_init+0x174/0x1bc do_one_initcall+0xb8/0x310 kernel_init_freeable+0x4b8/0x56c kernel_init+0x10/0x138 ret_from_fork+0x10/0x18 -> #2 (opp_table_lock){+.+.}: lock_acquire+0xb8/0x148 __mutex_lock+0x104/0xf50 mutex_lock_nested+0x1c/0x28 _of_add_opp_table_v2+0xb4/0x760 dev_pm_opp_of_add_table+0x5c/0x240 dev_pm_opp_of_cpumask_add_table+0x5c/0x100 cpufreq_init+0x160/0x430 cpufreq_online+0x1cc/0xe30 cpufreq_add_dev+0x78/0x198 subsys_interface_register+0x168/0x270 cpufreq_register_driver+0x1c8/0x278 dt_cpufreq_probe+0xdc/0x1b8 platform_drv_probe+0xb4/0x168 driver_probe_device+0x318/0x4b0 __device_attach_driver+0xfc/0x1f0 bus_for_each_drv+0xf8/0x180 __device_attach+0x164/0x200 device_initial_probe+0x10/0x18 bus_probe_device+0x110/0x178 device_add+0x6d8/0x908 platform_device_add+0x138/0x3d8 platform_device_register_full+0x1cc/0x1f8 cpufreq_dt_platdev_init+0x174/0x1bc do_one_initcall+0xb8/0x310 kernel_init_freeable+0x4b8/0x56c kernel_init+0x10/0x138 ret_from_fork+0x10/0x18 -> #1 (subsys mutex#6){+.+.}: lock_acquire+0xb8/0x148 __mutex_lock+0x104/0xf50 mutex_lock_nested+0x1c/0x28 subsys_interface_register+0xd8/0x270 cpufreq_register_driver+0x1c8/0x278 dt_cpufreq_probe+0xdc/0x1b8 platform_drv_probe+0xb4/0x168 driver_probe_device+0x318/0x4b0 __device_attach_driver+0xfc/0x1f0 bus_for_each_drv+0xf8/0x180 __device_attach+0x164/0x200 device_initial_probe+0x10/0x18 bus_probe_device+0x110/0x178 device_add+0x6d8/0x908 platform_device_add+0x138/0x3d8 platform_device_register_full+0x1cc/0x1f8 cpufreq_dt_platdev_init+0x174/0x1bc do_one_initcall+0xb8/0x310 kernel_init_freeable+0x4b8/0x56c kernel_init+0x10/0x138 ret_from_fork+0x10/0x18 -> #0 (cpu_hotplug_lock.rw_sem){++++}: __lock_acquire+0x203c/0x21d0 lock_acquire+0xb8/0x148 cpus_read_lock+0x58/0x1c8 static_key_enable+0x14/0x30 sched_feat_write+0x314/0x428 full_proxy_write+0xa0/0x138 __vfs_write+0xd8/0x388 vfs_write+0xdc/0x318 ksys_write+0xb4/0x138 sys_write+0xc/0x18 __sys_trace_return+0x0/0x4 other info that might help us debug this: Chain exists of: cpu_hotplug_lock.rw_sem --> opp_table_lock --> &sb->s_type->i_mutex_key#3 Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&sb->s_type->i_mutex_key#3); lock(opp_table_lock); lock(&sb->s_type->i_mutex_key#3); lock(cpu_hotplug_lock.rw_sem); *** DEADLOCK *** 2 locks held by sh/3358: #0: 00000000a8c4b363 (sb_writers#10){.+.+}, at: vfs_write+0x238/0x318 #1: 00000000c1b31a88 (&sb->s_type->i_mutex_key#3){+.+.}, at: sched_feat_write+0x160/0x428 stack backtrace: CPU: 5 PID: 3358 Comm: sh Not tainted 4.18.0-rc6-00152-gcd3f77d74ac3-dirty #18 Hardware name: Renesas H3ULCB Kingfisher board based on r8a7795 ES2.0+ (DT) Call trace: dump_backtrace+0x0/0x288 show_stack+0x14/0x20 dump_stack+0x13c/0x1ac print_circular_bug.isra.10+0x270/0x438 check_prev_add.constprop.16+0x4dc/0xb98 __lock_acquire+0x203c/0x21d0 lock_acquire+0xb8/0x148 cpus_read_lock+0x58/0x1c8 static_key_enable+0x14/0x30 sched_feat_write+0x314/0x428 full_proxy_write+0xa0/0x138 __vfs_write+0xd8/0x388 vfs_write+0xdc/0x318 ksys_write+0xb4/0x138 sys_write+0xc/0x18 __sys_trace_return+0x0/0x4 This is because when loading the cpufreq_dt module we first acquire cpu_hotplug_lock.rw_sem lock, then in cpufreq_init(), we are taking the &sb->s_type->i_mutex_key lock. But when writing to /sys/kernel/debug/sched_features, the cpu_hotplug_lock.rw_sem lock depends on the &sb->s_type->i_mutex_key lock. To fix this bug, reverse the lock acquisition order when writing to sched_features, this way cpu_hotplug_lock.rw_sem no longer depends on &sb->s_type->i_mutex_key. Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Eugeniu Rosca <erosca@de.adit-jv.com> Cc: George G. Davis <george_davis@mentor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20180731121222.26195-1-jiada_wang@mentor.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
Arnd Bergmann
|
474b9c777b |
y2038: sched: Change sched_rr_get_interval to use __kernel_timespec
This is a preparation patch for converting sys_sched_rr_get_interval to work with 64-bit time_t on 32-bit architectures. The 'interval' argument is changed to struct __kernel_timespec, which will be redefined using 64-bit time_t in the future. The compat version of the system call in turn is enabled for compilation with CONFIG_COMPAT_32BIT_TIME so the individual 32-bit architectures can share the handling of the traditional argument with 64-bit architectures providing it for their compat mode. Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
9afc5eee65 |
y2038: globally rename compat_time to old_time32
Christoph Hellwig suggested a slightly different path for handling backwards compatibility with the 32-bit time_t based system calls: Rather than simply reusing the compat_sys_* entry points on 32-bit architectures unchanged, we get rid of those entry points and the compat_time types by renaming them to something that makes more sense on 32-bit architectures (which don't have a compat mode otherwise), and then share the entry points under the new name with the 64-bit architectures that use them for implementing the compatibility. The following types and interfaces are renamed here, and moved from linux/compat_time.h to linux/time32.h: old new --- --- compat_time_t old_time32_t struct compat_timeval struct old_timeval32 struct compat_timespec struct old_timespec32 struct compat_itimerspec struct old_itimerspec32 ns_to_compat_timeval() ns_to_old_timeval32() get_compat_itimerspec64() get_old_itimerspec32() put_compat_itimerspec64() put_old_itimerspec32() compat_get_timespec64() get_old_timespec32() compat_put_timespec64() put_old_timespec32() As we already have aliases in place, this patch addresses only the instances that are relevant to the system call interface in particular, not those that occur in device drivers and other modules. Those will get handled separately, while providing the 64-bit version of the respective interfaces. I'm not renaming the timex, rusage and itimerval structures, as we are still debating what the new interface will look like, and whether we will need a replacement at all. This also doesn't change the names of the syscall entry points, which can be done more easily when we actually switch over the 32-bit architectures to use them, at that point we need to change COMPAT_SYSCALL_DEFINEx to SYSCALL_DEFINEx with a new name, e.g. with a _time32 suffix. Suggested-by: Christoph Hellwig <hch@infradead.org> Link: https://lore.kernel.org/lkml/20180705222110.GA5698@infradead.org/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Linus Torvalds
|
cd9b44f907 |
Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton: - the rest of MM - procfs updates - various misc things - more y2038 fixes - get_maintainer updates - lib/ updates - checkpatch updates - various epoll updates - autofs updates - hfsplus - some reiserfs work - fatfs updates - signal.c cleanups - ipc/ updates * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (166 commits) ipc/util.c: update return value of ipc_getref from int to bool ipc/util.c: further variable name cleanups ipc: simplify ipc initialization ipc: get rid of ids->tables_initialized hack lib/rhashtable: guarantee initial hashtable allocation lib/rhashtable: simplify bucket_table_alloc() ipc: drop ipc_lock() ipc/util.c: correct comment in ipc_obtain_object_check ipc: rename ipcctl_pre_down_nolock() ipc/util.c: use ipc_rcu_putref() for failues in ipc_addid() ipc: reorganize initialization of kern_ipc_perm.seq ipc: compute kern_ipc_perm.id under the ipc lock init/Kconfig: remove EXPERT from CHECKPOINT_RESTORE fs/sysv/inode.c: use ktime_get_real_seconds() for superblock stamp adfs: use timespec64 for time conversion kernel/sysctl.c: fix typos in comments drivers/rapidio/devices/rio_mport_cdev.c: remove redundant pointer md fork: don't copy inconsistent signal handler state to child signal: make get_signal() return bool signal: make sigkill_pending() return bool ... |
||
Christoph Hellwig
|
e05a8e4d88 |
sched/wait: assert the wait_queue_head lock is held in __wake_up_common
Better ensure we actually hold the lock using lockdep than just commenting on it. Due to the various exported _locked interfaces it is far too easy to get the locking wrong. Link: http://lkml.kernel.org/r/20171214152344.6880-4-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jason Baron <jbaron@akamai.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
dfec4a8478 |
More power management updates for 4.19-rc1
- Make the idle loop handle stopped scheduler tick correctly (Rafael
Wysocki).
- Prevent the menu cpuidle governor from letting CPUs spend too much
time in shallow idle states when it is invoked with scheduler tick
stopped and clean it up somewhat (Rafael Wysocki).
- Avoid invoking the platform firmware to make the platform enter
the ACPI S3 sleep state with suspended PCIe root ports which may
confuse the firmware and cause it to crash (Rafael Wysocki).
- Fix sysfs-related race in the ondemand and conservative cpufreq
governors which may cause the system to crash if the governor
module is removed during an update of CPU frequency limits (Henry
Willard).
- Select SRCU when building the system wakeup framework to avoid a
build issue in it (zhangyi).
- Make the descriptions of ACPI C-states vendor-neutral to avoid
confusion (Prarit Bhargava).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=9GrU
-----END PGP SIGNATURE-----
Merge tag 'pm-4.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These fix the main idle loop and the menu cpuidle governor, clean up
the latter, fix a mistake in the PCI bus type's support for system
suspend and resume, fix the ondemand and conservative cpufreq
governors, address a build issue in the system wakeup framework and
make the ACPI C-states desciptions less confusing.
Specifics:
- Make the idle loop handle stopped scheduler tick correctly (Rafael
Wysocki).
- Prevent the menu cpuidle governor from letting CPUs spend too much
time in shallow idle states when it is invoked with scheduler tick
stopped and clean it up somewhat (Rafael Wysocki).
- Avoid invoking the platform firmware to make the platform enter the
ACPI S3 sleep state with suspended PCIe root ports which may
confuse the firmware and cause it to crash (Rafael Wysocki).
- Fix sysfs-related race in the ondemand and conservative cpufreq
governors which may cause the system to crash if the governor
module is removed during an update of CPU frequency limits (Henry
Willard).
- Select SRCU when building the system wakeup framework to avoid a
build issue in it (zhangyi).
- Make the descriptions of ACPI C-states vendor-neutral to avoid
confusion (Prarit Bhargava)"
* tag 'pm-4.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpuidle: menu: Handle stopped tick more aggressively
sched: idle: Avoid retaining the tick when it has been stopped
PCI / ACPI / PM: Resume all bridges on suspend-to-RAM
cpuidle: menu: Update stale polling override comment
cpufreq: governor: Avoid accessing invalid governor_data
x86/ACPI/cstate: Make APCI C1 FFH MWAIT C-state description vendor-neutral
cpuidle: menu: Fix white space
PM / sleep: wakeup: Fix build error caused by missing SRCU support
|
||
|
Linus Torvalds
|
0214f46b3a |
Merge branch 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull core signal handling updates from Eric Biederman:
"It was observed that a periodic timer in combination with a
sufficiently expensive fork could prevent fork from every completing.
This contains the changes to remove the need for that restart.
This set of changes is split into several parts:
- The first part makes PIDTYPE_TGID a proper pid type instead
something only for very special cases. The part starts using
PIDTYPE_TGID enough so that in __send_signal where signals are
actually delivered we know if the signal is being sent to a a group
of processes or just a single process.
- With that prep work out of the way the logic in fork is modified so
that fork logically makes signals received while it is running
appear to be received after the fork completes"
* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (22 commits)
signal: Don't send signals to tasks that don't exist
signal: Don't restart fork when signals come in.
fork: Have new threads join on-going signal group stops
fork: Skip setting TIF_SIGPENDING in ptrace_init_task
signal: Add calculate_sigpending()
fork: Unconditionally exit if a fatal signal is pending
fork: Move and describe why the code examines PIDNS_ADDING
signal: Push pid type down into complete_signal.
signal: Push pid type down into __send_signal
signal: Push pid type down into send_signal
signal: Pass pid type into do_send_sig_info
signal: Pass pid type into send_sigio_to_task & send_sigurg_to_task
signal: Pass pid type into group_send_sig_info
signal: Pass pid and pid type into send_sigqueue
posix-timers: Noralize good_sigevent
signal: Use PIDTYPE_TGID to clearly store where file signals will be sent
pid: Implement PIDTYPE_TGID
pids: Move the pgrp and session pid pointers from task_struct to signal_struct
kvm: Don't open code task_pid in kvm_vcpu_ioctl
pids: Compute task_tgid using signal->leader_pid
...
|
||
|
Linus Torvalds
|
7140ad3898 |
Updates for v4.19:
- Restructure of lockdep and latency tracers
This is the biggest change. Joel Fernandes restructured the hooks
from irqs and preemption disabling and enabling. He got rid of
a lot of the preprocessor #ifdef mess that they caused.
He turned both lockdep and the latency tracers to use trace events
inserted in the preempt/irqs disabling paths. But unfortunately,
these started to cause issues in corner cases. Thus, parts of the
code was reverted back to where lockde and the latency tracers
just get called directly (without using the trace events).
But because the original change cleaned up the code very nicely
we kept that, as well as the trace events for preempt and irqs
disabling, but they are limited to not being called in NMIs.
- Have trace events use SRCU for "rcu idle" calls. This was required
for the preempt/irqs off trace events. But it also had to not
allow them to be called in NMI context. Waiting till Paul makes
an NMI safe SRCU API.
- New notrace SRCU API to allow trace events to use SRCU.
- Addition of mcount-nop option support
- SPDX headers replacing GPL templates.
- Various other fixes and clean ups.
- Some fixes are marked for stable, but were not fully tested
before the merge window opened.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCW3ruhRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qiM7AP47NhYdSnCFCRUJfrt6PovXmQtuCHt3
c3QMoGGdvzh9YAEAqcSXwh7uLhpHUp1LjMAPkXdZVwNddf4zJQ1zyxQ+EAU=
=vgEr
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- Restructure of lockdep and latency tracers
This is the biggest change. Joel Fernandes restructured the hooks
from irqs and preemption disabling and enabling. He got rid of a lot
of the preprocessor #ifdef mess that they caused.
He turned both lockdep and the latency tracers to use trace events
inserted in the preempt/irqs disabling paths. But unfortunately,
these started to cause issues in corner cases. Thus, parts of the
code was reverted back to where lockdep and the latency tracers just
get called directly (without using the trace events). But because the
original change cleaned up the code very nicely we kept that, as well
as the trace events for preempt and irqs disabling, but they are
limited to not being called in NMIs.
- Have trace events use SRCU for "rcu idle" calls. This was required
for the preempt/irqs off trace events. But it also had to not allow
them to be called in NMI context. Waiting till Paul makes an NMI safe
SRCU API.
- New notrace SRCU API to allow trace events to use SRCU.
- Addition of mcount-nop option support
- SPDX headers replacing GPL templates.
- Various other fixes and clean ups.
- Some fixes are marked for stable, but were not fully tested before
the merge window opened.
* tag 'trace-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (44 commits)
tracing: Fix SPDX format headers to use C++ style comments
tracing: Add SPDX License format tags to tracing files
tracing: Add SPDX License format to bpf_trace.c
blktrace: Add SPDX License format header
s390/ftrace: Add -mfentry and -mnop-mcount support
tracing: Add -mcount-nop option support
tracing: Avoid calling cc-option -mrecord-mcount for every Makefile
tracing: Handle CC_FLAGS_FTRACE more accurately
Uprobe: Additional argument arch_uprobe to uprobe_write_opcode()
Uprobes: Simplify uprobe_register() body
tracepoints: Free early tracepoints after RCU is initialized
uprobes: Use synchronize_rcu() not synchronize_sched()
tracing: Fix synchronizing to event changes with tracepoint_synchronize_unregister()
ftrace: Remove unused pointer ftrace_swapper_pid
tracing: More reverting of "tracing: Centralize preemptirq tracepoints and unify their usage"
tracing/irqsoff: Handle preempt_count for different configs
tracing: Partial revert of "tracing: Centralize preemptirq tracepoints and unify their usage"
tracing: irqsoff: Account for additional preempt_disable
trace: Use rcu_dereference_raw for hooks from trace-event subsystem
tracing/kprobes: Fix within_notrace_func() to check only notrace functions
...
|
||
Rafael J. Wysocki
|
7059b36636 |
sched: idle: Avoid retaining the tick when it has been stopped
If the tick has been stopped already, but the governor has not asked to
stop it (which it can do sometimes), the idle loop should invoke
tick_nohz_idle_stop_tick(), to let tick_nohz_stop_tick() take care
of this case properly.
Fixes:
|
||
|
Linus Torvalds
|
958f338e96 |
Merge branch 'l1tf-final' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Merge L1 Terminal Fault fixes from Thomas Gleixner:
"L1TF, aka L1 Terminal Fault, is yet another speculative hardware
engineering trainwreck. It's a hardware vulnerability which allows
unprivileged speculative access to data which is available in the
Level 1 Data Cache when the page table entry controlling the virtual
address, which is used for the access, has the Present bit cleared or
other reserved bits set.
If an instruction accesses a virtual address for which the relevant
page table entry (PTE) has the Present bit cleared or other reserved
bits set, then speculative execution ignores the invalid PTE and loads
the referenced data if it is present in the Level 1 Data Cache, as if
the page referenced by the address bits in the PTE was still present
and accessible.
While this is a purely speculative mechanism and the instruction will
raise a page fault when it is retired eventually, the pure act of
loading the data and making it available to other speculative
instructions opens up the opportunity for side channel attacks to
unprivileged malicious code, similar to the Meltdown attack.
While Meltdown breaks the user space to kernel space protection, L1TF
allows to attack any physical memory address in the system and the
attack works across all protection domains. It allows an attack of SGX
and also works from inside virtual machines because the speculation
bypasses the extended page table (EPT) protection mechanism.
The assoicated CVEs are: CVE-2018-3615, CVE-2018-3620, CVE-2018-3646
The mitigations provided by this pull request include:
- Host side protection by inverting the upper address bits of a non
present page table entry so the entry points to uncacheable memory.
- Hypervisor protection by flushing L1 Data Cache on VMENTER.
- SMT (HyperThreading) control knobs, which allow to 'turn off' SMT
by offlining the sibling CPU threads. The knobs are available on
the kernel command line and at runtime via sysfs
- Control knobs for the hypervisor mitigation, related to L1D flush
and SMT control. The knobs are available on the kernel command line
and at runtime via sysfs
- Extensive documentation about L1TF including various degrees of
mitigations.
Thanks to all people who have contributed to this in various ways -
patches, review, testing, backporting - and the fruitful, sometimes
heated, but at the end constructive discussions.
There is work in progress to provide other forms of mitigations, which
might be less horrible performance wise for a particular kind of
workloads, but this is not yet ready for consumption due to their
complexity and limitations"
* 'l1tf-final' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (75 commits)
x86/microcode: Allow late microcode loading with SMT disabled
tools headers: Synchronise x86 cpufeatures.h for L1TF additions
x86/mm/kmmio: Make the tracer robust against L1TF
x86/mm/pat: Make set_memory_np() L1TF safe
x86/speculation/l1tf: Make pmd/pud_mknotpresent() invert
x86/speculation/l1tf: Invert all not present mappings
cpu/hotplug: Fix SMT supported evaluation
KVM: VMX: Tell the nested hypervisor to skip L1D flush on vmentry
x86/speculation: Use ARCH_CAPABILITIES to skip L1D flush on vmentry
x86/speculation: Simplify sysfs report of VMX L1TF vulnerability
Documentation/l1tf: Remove Yonah processors from not vulnerable list
x86/KVM/VMX: Don't set l1tf_flush_l1d from vmx_handle_external_intr()
x86/irq: Let interrupt handlers set kvm_cpu_l1tf_flush_l1d
x86: Don't include linux/irq.h from asm/hardirq.h
x86/KVM/VMX: Introduce per-host-cpu analogue of l1tf_flush_l1d
x86/irq: Demote irq_cpustat_t::__softirq_pending to u16
x86/KVM/VMX: Move the l1tf_flush_l1d test to vmx_l1d_flush()
x86/KVM/VMX: Replace 'vmx_l1d_flush_always' with 'vmx_l1d_flush_cond'
x86/KVM/VMX: Don't set l1tf_flush_l1d to true from vmx_l1d_flush()
cpu/hotplug: detect SMT disabled by BIOS
...
|
||
|
Linus Torvalds
|
13e091b6dd |
Merge branch 'x86-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 timer updates from Thomas Gleixner: "Early TSC based time stamping to allow better boot time analysis. This comes with a general cleanup of the TSC calibration code which grew warts and duct taping over the years and removes 250 lines of code. Initiated and mostly implemented by Pavel with help from various folks" * 'x86-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits) x86/kvmclock: Mark kvm_get_preset_lpj() as __init x86/tsc: Consolidate init code sched/clock: Disable interrupts when calling generic_sched_clock_init() timekeeping: Prevent false warning when persistent clock is not available sched/clock: Close a hole in sched_clock_init() x86/tsc: Make use of tsc_calibrate_cpu_early() x86/tsc: Split native_calibrate_cpu() into early and late parts sched/clock: Use static key for sched_clock_running sched/clock: Enable sched clock early sched/clock: Move sched clock initialization and merge with generic clock x86/tsc: Use TSC as sched clock early x86/tsc: Initialize cyc2ns when tsc frequency is determined x86/tsc: Calibrate tsc only once ARM/time: Remove read_boot_clock64() s390/time: Remove read_boot_clock64() timekeeping: Default boot time offset to local_clock() timekeeping: Replace read_boot_clock64() with read_persistent_wall_and_boot_offset() s390/time: Add read_persistent_wall_and_boot_offset() x86/xen/time: Output xen sched_clock time from 0 x86/xen/time: Initialize pv xen time in init_hypervisor_platform() ... |
||
|
Linus Torvalds
|
de5d1b39ea |
Merge branch 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking/atomics update from Thomas Gleixner:
"The locking, atomics and memory model brains delivered:
- A larger update to the atomics code which reworks the ordering
barriers, consolidates the atomic primitives, provides the new
atomic64_fetch_add_unless() primitive and cleans up the include
hell.
- Simplify cmpxchg() instrumentation and add instrumentation for
xchg() and cmpxchg_double().
- Updates to the memory model and documentation"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (48 commits)
locking/atomics: Rework ordering barriers
locking/atomics: Instrument cmpxchg_double*()
locking/atomics: Instrument xchg()
locking/atomics: Simplify cmpxchg() instrumentation
locking/atomics/x86: Reduce arch_cmpxchg64*() instrumentation
tools/memory-model: Rename litmus tests to comply to norm7
tools/memory-model/Documentation: Fix typo, smb->smp
sched/Documentation: Update wake_up() & co. memory-barrier guarantees
locking/spinlock, sched/core: Clarify requirements for smp_mb__after_spinlock()
sched/core: Use smp_mb() in wake_woken_function()
tools/memory-model: Add informal LKMM documentation to MAINTAINERS
locking/atomics/Documentation: Describe atomic_set() as a write operation
tools/memory-model: Make scripts executable
tools/memory-model: Remove ACCESS_ONCE() from model
tools/memory-model: Remove ACCESS_ONCE() from recipes
locking/memory-barriers.txt/kokr: Update Korean translation to fix broken DMA vs. MMIO ordering example
MAINTAINERS: Add Daniel Lustig as an LKMM reviewer
tools/memory-model: Fix ISA2+pooncelock+pooncelock+pombonce name
tools/memory-model: Add litmus test for full multicopy atomicity
locking/refcount: Always allow checked forms
...
|
||
Thomas Gleixner
|
f2701b77bb |
Merge 4.18-rc7 into master to pick up the KVM dependcy
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
||
Eric W. Biederman
|
088fe47ce9 |
signal: Add calculate_sigpending()
Add a function calculate_sigpending to test to see if any signals are
pending for a new task immediately following fork. Signals have to
happen either before or after fork. Today our practice is to push
all of the signals to before the fork, but that has the downside that
frequent or periodic signals can make fork take much much longer than
normal or prevent fork from completing entirely.
So we need move signals that we can after the fork to prevent that.
This updates the code to set TIF_SIGPENDING on a new task if there
are signals or other activities that have moved so that they appear
to happen after the fork.
As the code today restarts if it sees any such activity this won't
immediately have an effect, as there will be no reason for it
to set TIF_SIGPENDING immediately after the fork.
Adding calculate_sigpending means the code in fork can safely be
changed to not always restart if a signal is pending.
The new calculate_sigpending function sets sigpending if there
are pending bits in jobctl, pending signals, the freezer needs
to freeze the new task or the live kernel patching framework
need the new thread to take the slow path to userspace.
I have verified that setting TIF_SIGPENDING does make a new process
take the slow path to userspace before it executes it's first userspace
instruction.
I have looked at the callers of signal_wake_up and the code paths
setting TIF_SIGPENDING and I don't see anything else that needs to be
handled. The code probably doesn't need to set TIF_SIGPENDING for the
kernel live patching as it uses a separate thread flag as well. But
at this point it seems safer reuse the recalc_sigpending logic and get
the kernel live patching folks to sort out their story later.
V2: I have moved the test into schedule_tail where siglock can
be grabbed and recalc_sigpending can be reused directly.
Further as the last action of setting up a new task this
guarantees that TIF_SIGPENDING will be properly set in the
new process.
The helper calculate_sigpending takes the siglock and
uncontitionally sets TIF_SIGPENDING and let's recalc_sigpending
clear TIF_SIGPENDING if it is unnecessary. This allows reusing
the existing code and keeps maintenance of the conditions simple.
Oleg Nesterov <oleg@redhat.com> suggested the movement
and pointed out the need to take siglock if this code
was going to be called while the new task is discoverable.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
||
Joel Fernandes (Google)
|
c3bc8fd637 |
tracing: Centralize preemptirq tracepoints and unify their usage
This patch detaches the preemptirq tracepoints from the tracers and
keeps it separate.
Advantages:
* Lockdep and irqsoff event can now run in parallel since they no longer
have their own calls.
* This unifies the usecase of adding hooks to an irqsoff and irqson
event, and a preemptoff and preempton event.
3 users of the events exist:
- Lockdep
- irqsoff and preemptoff tracers
- irqs and preempt trace events
The unification cleans up several ifdefs and makes the code in preempt
tracer and irqsoff tracers simpler. It gets rid of all the horrific
ifdeferry around PROVE_LOCKING and makes configuration of the different
users of the tracepoints more easy and understandable. It also gets rid
of the time_* function calls from the lockdep hooks used to call into
the preemptirq tracer which is not needed anymore. The negative delta in
lines of code in this patch is quite large too.
In the patch we introduce a new CONFIG option PREEMPTIRQ_TRACEPOINTS
as a single point for registering probes onto the tracepoints. With
this,
the web of config options for preempt/irq toggle tracepoints and its
users becomes:
PREEMPT_TRACER PREEMPTIRQ_EVENTS IRQSOFF_TRACER PROVE_LOCKING
| | \ | |
\ (selects) / \ \ (selects) /
TRACE_PREEMPT_TOGGLE ----> TRACE_IRQFLAGS
\ /
\ (depends on) /
PREEMPTIRQ_TRACEPOINTS
Other than the performance tests mentioned in the previous patch, I also
ran the locking API test suite. I verified that all tests cases are
passing.
I also injected issues by not registering lockdep probes onto the
tracepoints and I see failures to confirm that the probes are indeed
working.
This series + lockdep probes not registered (just to inject errors):
[ 0.000000] hard-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 0.000000] soft-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 0.000000] sirq-safe-A => hirqs-on/12:FAILED|FAILED| ok |
[ 0.000000] sirq-safe-A => hirqs-on/21:FAILED|FAILED| ok |
[ 0.000000] hard-safe-A + irqs-on/12:FAILED|FAILED| ok |
[ 0.000000] soft-safe-A + irqs-on/12:FAILED|FAILED| ok |
[ 0.000000] hard-safe-A + irqs-on/21:FAILED|FAILED| ok |
[ 0.000000] soft-safe-A + irqs-on/21:FAILED|FAILED| ok |
[ 0.000000] hard-safe-A + unsafe-B #1/123: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #1/123: ok | ok | ok |
With this series + lockdep probes registered, all locking tests pass:
[ 0.000000] hard-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 0.000000] soft-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 0.000000] sirq-safe-A => hirqs-on/12: ok | ok | ok |
[ 0.000000] sirq-safe-A => hirqs-on/21: ok | ok | ok |
[ 0.000000] hard-safe-A + irqs-on/12: ok | ok | ok |
[ 0.000000] soft-safe-A + irqs-on/12: ok | ok | ok |
[ 0.000000] hard-safe-A + irqs-on/21: ok | ok | ok |
[ 0.000000] soft-safe-A + irqs-on/21: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #1/123: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #1/123: ok | ok | ok |
Link: http://lkml.kernel.org/r/20180730222423.196630-4-joel@joelfernandes.org
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
||
Pavel Tatashin
|
bd9f943e5d |
sched/clock: Disable interrupts when calling generic_sched_clock_init()
sched_clock_init() used be called early during boot when interrupts were
still disabled. After the recent changes to utilize sched clock early the
sched_clock_init() call happens when interrupts are already enabled, which
triggers the following warning:
WARNING: CPU: 0 PID: 0 at kernel/time/sched_clock.c:180 sched_clock_register+0x44/0x278
[<c001a13c>] (warn_slowpath_null) from [<c052367c>] (sched_clock_register+0x44/0x278)
[<c052367c>] (sched_clock_register) from [<c05238d8>] (generic_sched_clock_init+0x28/0x88)
[<c05238d8>] (generic_sched_clock_init) from [<c0521a00>] (sched_clock_init+0x54/0x74)
[<c0521a00>] (sched_clock_init) from [<c0519c18>] (start_kernel+0x310/0x3e4)
[<c0519c18>] (start_kernel) from [<00000000>] ( (null))
Disable IRQs for the duration of generic_sched_clock_init().
Fixes:
|
||
|
Srikar Dronamraju
|
b6a60cf36d |
sched/numa: Move task_numa_placement() closer to numa_migrate_preferred()
numa_migrate_preferred() is called periodically or when task preferred node changes. Preferred node evaluations happen once per scan sequence. If the scan completion happens just after the periodic NUMA migration, then we try to migrate to the preferred node and the preferred node might change, needing another node migration. Avoid this by checking for scan sequence completion only when checking for periodic migration. Running SPECjbb2005 on a 4 node machine and comparing bops/JVM JVMS LAST_PATCH WITH_PATCH %CHANGE 16 25862.6 26158.1 1.14258 1 74357 72725 -2.19482 Running SPECjbb2005 on a 16 node machine and comparing bops/JVM JVMS LAST_PATCH WITH_PATCH %CHANGE 8 117019 113992 -2.58 1 179095 174947 -2.31 (numbers from v1 based on v4.17-rc5) Testcase Time: Min Max Avg StdDev numa01.sh Real: 449.46 770.77 615.22 101.70 numa01.sh Sys: 132.72 208.17 170.46 24.96 numa01.sh User: 39185.26 60290.89 50066.76 6807.84 numa02.sh Real: 60.85 61.79 61.28 0.37 numa02.sh Sys: 15.34 24.71 21.08 3.61 numa02.sh User: 5204.41 5249.85 5231.21 17.60 numa03.sh Real: 785.50 916.97 840.77 44.98 numa03.sh Sys: 108.08 133.60 119.43 8.82 numa03.sh User: 61422.86 70919.75 64720.87 3310.61 numa04.sh Real: 429.57 587.37 480.80 57.40 numa04.sh Sys: 240.61 321.97 290.84 33.58 numa04.sh User: 34597.65 40498.99 37079.48 2060.72 numa05.sh Real: 392.09 431.25 414.65 13.82 numa05.sh Sys: 229.41 372.48 297.54 53.14 numa05.sh User: 33390.86 34697.49 34222.43 556.42 Testcase Time: Min Max Avg StdDev %Change numa01.sh Real: 424.63 566.18 498.12 59.26 23.50% numa01.sh Sys: 160.19 256.53 208.98 37.02 -18.4% numa01.sh User: 37320.00 46225.58 42001.57 3482.45 19.20% numa02.sh Real: 60.17 62.47 60.91 0.85 0.607% numa02.sh Sys: 15.30 22.82 17.04 2.90 23.70% numa02.sh User: 5202.13 5255.51 5219.08 20.14 0.232% numa03.sh Real: 823.91 844.89 833.86 8.46 0.828% numa03.sh Sys: 130.69 148.29 140.47 6.21 -14.9% numa03.sh User: 62519.15 64262.20 63613.38 620.05 1.740% numa04.sh Real: 515.30 603.74 548.56 30.93 -12.3% numa04.sh Sys: 459.73 525.48 489.18 21.63 -40.5% numa04.sh User: 40561.96 44919.18 42047.87 1526.85 -11.8% numa05.sh Real: 396.58 454.37 421.13 19.71 -1.53% numa05.sh Sys: 208.72 422.02 348.90 73.60 -14.7% numa05.sh User: 33124.08 36109.35 34846.47 1089.74 -1.79% Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1529514181-9842-20-git-send-email-srikar@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Srikar Dronamraju
|
f35678b6a1 |
sched/numa: Use group_weights to identify if migration degrades locality
On NUMA_BACKPLANE and NUMA_GLUELESS_MESH systems, tasks/memory should be consolidated to the closest group of nodes. In such a case, relying on group_fault metric may not always help to consolidate. There can always be a case where a node closer to the preferred node may have lesser faults than a node further away from the preferred node. In such a case, moving to node with more faults might avoid numa consolidation. Using group_weight would help to consolidate task/memory around the preferred_node. While here, to be on the conservative side, don't override migrate thread degrades locality logic for CPU_NEWLY_IDLE load balancing. Note: Similar problems exist with should_numa_migrate_memory and will be dealt separately. Running SPECjbb2005 on a 4 node machine and comparing bops/JVM JVMS LAST_PATCH WITH_PATCH %CHANGE 16 25645.4 25960 1.22 1 72142 73550 1.95 Running SPECjbb2005 on a 16 node machine and comparing bops/JVM JVMS LAST_PATCH WITH_PATCH %CHANGE 8 110199 120071 8.958 1 176303 176249 -0.03 (numbers from v1 based on v4.17-rc5) Testcase Time: Min Max Avg StdDev numa01.sh Real: 490.04 774.86 596.26 96.46 numa01.sh Sys: 151.52 242.88 184.82 31.71 numa01.sh User: 41418.41 60844.59 48776.09 6564.27 numa02.sh Real: 60.14 62.94 60.98 1.00 numa02.sh Sys: 16.11 30.77 21.20 5.28 numa02.sh User: 5184.33 5311.09 5228.50 44.24 numa03.sh Real: 790.95 856.35 826.41 24.11 numa03.sh Sys: 114.93 118.85 117.05 1.63 numa03.sh User: 60990.99 64959.28 63470.43 1415.44 numa04.sh Real: 434.37 597.92 504.87 59.70 numa04.sh Sys: 237.63 397.40 289.74 55.98 numa04.sh User: 34854.87 41121.83 38572.52 2615.84 numa05.sh Real: 386.77 448.90 417.22 22.79 numa05.sh Sys: 149.23 379.95 303.04 79.55 numa05.sh User: 32951.76 35959.58 34562.18 1034.05 Testcase Time: Min Max Avg StdDev %Change numa01.sh Real: 493.19 672.88 597.51 59.38 -0.20% numa01.sh Sys: 150.09 245.48 207.76 34.26 -11.0% numa01.sh User: 41928.51 53779.17 48747.06 3901.39 0.059% numa02.sh Real: 60.63 62.87 61.22 0.83 -0.39% numa02.sh Sys: 16.64 27.97 20.25 4.06 4.691% numa02.sh User: 5222.92 5309.60 5254.03 29.98 -0.48% numa03.sh Real: 821.52 902.15 863.60 32.41 -4.30% numa03.sh Sys: 112.04 130.66 118.35 7.08 -1.09% numa03.sh User: 62245.16 69165.14 66443.04 2450.32 -4.47% numa04.sh Real: 414.53 519.57 476.25 37.00 6.009% numa04.sh Sys: 181.84 335.67 280.41 54.07 3.327% numa04.sh User: 33924.50 39115.39 37343.78 1934.26 3.290% numa05.sh Real: 408.30 441.45 417.90 12.05 -0.16% numa05.sh Sys: 233.41 381.60 295.58 57.37 2.523% numa05.sh User: 33301.31 35972.50 34335.19 938.94 0.661% Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1529514181-9842-16-git-send-email-srikar@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Srikar Dronamraju
|
30619c89b1 |
sched/numa: Update the scan period without holding the numa_group lock
The metrics for updating scan periods are local or task specific. Currently this update happens under the numa_group lock, which seems unnecessary. Hence move this update outside the lock. Running SPECjbb2005 on a 4 node machine and comparing bops/JVM JVMS LAST_PATCH WITH_PATCH %CHANGE 16 25355.9 25645.4 1.141 1 72812 72142 -0.92 Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Rik van Riel <riel@surriel.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1529514181-9842-15-git-send-email-srikar@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Srikar Dronamraju
|
2d4056fafa |
sched/numa: Remove numa_has_capacity()
task_numa_find_cpu() helps to find the CPU to swap/move the task to. It's guarded by numa_has_capacity(). However node not having capacity shouldn't deter a task swapping if it helps NUMA placement. Further load_too_imbalanced(), which evaluates possibilities of move/swap, provides similar checks as numa_has_capacity. Hence remove numa_has_capacity() to enhance possibilities of task swapping even if load is imbalanced. Running SPECjbb2005 on a 4 node machine and comparing bops/JVM JVMS LAST_PATCH WITH_PATCH %CHANGE 16 25657.9 25804.1 0.569 1 74435 73413 -1.37 Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Rik van Riel <riel@surriel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1529514181-9842-13-git-send-email-srikar@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Srikar Dronamraju
|
0ad4e3dfe6 |
sched/numa: Modify migrate_swap() to accept additional parameters
There are checks in migrate_swap_stop() that check if the task/CPU combination is as per migrate_swap_arg before migrating. However atleast one of the two tasks to be swapped by migrate_swap() could have migrated to a completely different CPU before updating the migrate_swap_arg. The new CPU where the task is currently running could be a different node too. If the task has migrated, numa balancer might end up placing a task in a wrong node. Instead of achieving node consolidation, it may end up spreading the load across nodes. To avoid that pass the CPUs as additional parameters. While here, place migrate_swap under CONFIG_NUMA_BALANCING. Running SPECjbb2005 on a 4 node machine and comparing bops/JVM JVMS LAST_PATCH WITH_PATCH %CHANGE 16 25377.3 25226.6 -0.59 1 72287 73326 1.437 Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Rik van Riel <riel@surriel.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1529514181-9842-10-git-send-email-srikar@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Srikar Dronamraju
|
10864a9e22 |
sched/numa: Remove unused task_capacity from 'struct numa_stats'
The task_capacity field in 'struct numa_stats' is redundant. Also move nr_running for better packing within the struct. No functional changes. Running SPECjbb2005 on a 4 node machine and comparing bops/JVM JVMS LAST_PATCH WITH_PATCH %CHANGE 16 25308.6 25377.3 0.271 1 72964 72287 -0.92 Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Rik van Riel <riel@surriel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1529514181-9842-9-git-send-email-srikar@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Srikar Dronamraju
|
0ee7e74dc0 |
sched/numa: Skip nodes that are at 'hoplimit'
When comparing two nodes at a distance of 'hoplimit', we should consider nodes only up to 'hoplimit'. Currently we also consider nodes at 'oplimit' distance too. Hence two nodes at a distance of 'hoplimit' will have same groupweight. Fix this by skipping nodes at hoplimit. Running SPECjbb2005 on a 4 node machine and comparing bops/JVM JVMS LAST_PATCH WITH_PATCH %CHANGE 16 25375.3 25308.6 -0.26 1 72617 72964 0.477 Running SPECjbb2005 on a 16 node machine and comparing bops/JVM JVMS LAST_PATCH WITH_PATCH %CHANGE 8 113372 108750 -4.07684 1 177403 183115 3.21979 (numbers from v1 based on v4.17-rc5) Testcase Time: Min Max Avg StdDev numa01.sh Real: 478.45 565.90 515.11 30.87 numa01.sh Sys: 207.79 271.04 232.94 21.33 numa01.sh User: 39763.93 47303.12 43210.73 2644.86 numa02.sh Real: 60.00 61.46 60.78 0.49 numa02.sh Sys: 15.71 25.31 20.69 3.42 numa02.sh User: 5175.92 5265.86 5235.97 32.82 numa03.sh Real: 776.42 834.85 806.01 23.22 numa03.sh Sys: 114.43 128.75 121.65 5.49 numa03.sh User: 60773.93 64855.25 62616.91 1576.39 numa04.sh Real: 456.93 511.95 482.91 20.88 numa04.sh Sys: 178.09 460.89 356.86 94.58 numa04.sh User: 36312.09 42553.24 39623.21 2247.96 numa05.sh Real: 393.98 493.48 436.61 35.59 numa05.sh Sys: 164.49 329.15 265.87 61.78 numa05.sh User: 33182.65 36654.53 35074.51 1187.71 Testcase Time: Min Max Avg StdDev %Change numa01.sh Real: 414.64 819.20 556.08 147.70 -7.36% numa01.sh Sys: 77.52 205.04 139.40 52.05 67.10% numa01.sh User: 37043.24 61757.88 45517.48 9290.38 -5.06% numa02.sh Real: 60.80 63.32 61.63 0.88 -1.37% numa02.sh Sys: 17.35 39.37 25.71 7.33 -19.5% numa02.sh User: 5213.79 5374.73 5268.90 55.09 -0.62% numa03.sh Real: 780.09 948.64 831.43 63.02 -3.05% numa03.sh Sys: 104.96 136.92 116.31 11.34 4.591% numa03.sh User: 60465.42 73339.78 64368.03 4700.14 -2.72% numa04.sh Real: 412.60 681.92 521.29 96.64 -7.36% numa04.sh Sys: 210.32 314.10 251.77 37.71 41.74% numa04.sh User: 34026.38 45581.20 38534.49 4198.53 2.825% numa05.sh Real: 394.79 439.63 411.35 16.87 6.140% numa05.sh Sys: 238.32 330.09 292.31 38.32 -9.04% numa05.sh User: 33456.45 34876.07 34138.62 609.45 2.741% While there is a regression with this change, this change is needed from a correctness perspective. Also it helps consolidation as seen from perf bench output. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Rik van Riel <riel@surriel.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1529514181-9842-8-git-send-email-srikar@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Srikar Dronamraju
|
67d9f6c256 |
sched/debug: Reverse the order of printing faults
Fix the order in which the private and shared numa faults are getting printed. No functional changes. Running SPECjbb2005 on a 4 node machine and comparing bops/JVM JVMS LAST_PATCH WITH_PATCH %CHANGE 16 25215.7 25375.3 0.63 1 72107 72617 0.70 Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Rik van Riel <riel@surriel.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1529514181-9842-7-git-send-email-srikar@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Srikar Dronamraju
|
f03bb6760b |
sched/numa: Use task faults only if numa_group is not yet set up
When numa_group faults are available, task_numa_placement only uses numa_group faults to evaluate preferred node. However it still accounts task faults and even evaluates the preferred node just based on task faults just to discard it in favour of preferred node chosen on the basis of numa_group. Instead use task faults only if numa_group is not set. Running SPECjbb2005 on a 4 node machine and comparing bops/JVM JVMS LAST_PATCH WITH_PATCH %CHANGE 16 25549.6 25215.7 -1.30 1 73190 72107 -1.47 Running SPECjbb2005 on a 16 node machine and comparing bops/JVM JVMS LAST_PATCH WITH_PATCH %CHANGE 8 113437 113372 -0.05 1 196130 177403 -9.54 (numbers from v1 based on v4.17-rc5) Testcase Time: Min Max Avg StdDev numa01.sh Real: 506.35 794.46 599.06 104.26 numa01.sh Sys: 150.37 223.56 195.99 24.94 numa01.sh User: 43450.69 61752.04 49281.50 6635.33 numa02.sh Real: 60.33 62.40 61.31 0.90 numa02.sh Sys: 18.12 31.66 24.28 5.89 numa02.sh User: 5203.91 5325.32 5260.29 49.98 numa03.sh Real: 696.47 853.62 745.80 57.28 numa03.sh Sys: 85.68 123.71 97.89 13.48 numa03.sh User: 55978.45 66418.63 59254.94 3737.97 numa04.sh Real: 444.05 514.83 497.06 26.85 numa04.sh Sys: 230.39 375.79 316.23 48.58 numa04.sh User: 35403.12 41004.10 39720.80 2163.08 numa05.sh Real: 423.09 460.41 439.57 13.92 numa05.sh Sys: 287.38 480.15 369.37 68.52 numa05.sh User: 34732.12 38016.80 36255.85 1070.51 Testcase Time: Min Max Avg StdDev %Change numa01.sh Real: 478.45 565.90 515.11 30.87 16.29% numa01.sh Sys: 207.79 271.04 232.94 21.33 -15.8% numa01.sh User: 39763.93 47303.12 43210.73 2644.86 14.04% numa02.sh Real: 60.00 61.46 60.78 0.49 0.871% numa02.sh Sys: 15.71 25.31 20.69 3.42 17.35% numa02.sh User: 5175.92 5265.86 5235.97 32.82 0.464% numa03.sh Real: 776.42 834.85 806.01 23.22 -7.47% numa03.sh Sys: 114.43 128.75 121.65 5.49 -19.5% numa03.sh User: 60773.93 64855.25 62616.91 1576.39 -5.36% numa04.sh Real: 456.93 511.95 482.91 20.88 2.930% numa04.sh Sys: 178.09 460.89 356.86 94.58 -11.3% numa04.sh User: 36312.09 42553.24 39623.21 2247.96 0.246% numa05.sh Real: 393.98 493.48 436.61 35.59 0.677% numa05.sh Sys: 164.49 329.15 265.87 61.78 38.92% numa05.sh User: 33182.65 36654.53 35074.51 1187.71 3.368% Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1529514181-9842-6-git-send-email-srikar@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Srikar Dronamraju
|
8cd45eee43 |
sched/numa: Set preferred_node based on best_cpu
Currently preferred node is set to dst_nid which is the last node in the iteration whose group weight or task weight is greater than the current node. However it doesn't guarantee that dst_nid has the numa capacity to move. It also doesn't guarantee that dst_nid has the best_cpu which is the CPU/node ideal for node migration. Lets consider faults on a 4 node system with group weight numbers in different nodes being in 0 < 1 < 2 < 3 proportion. Consider the task is running on 3 and 0 is its preferred node but its capacity is full. Consider nodes 1, 2 and 3 have capacity. Then the task should be migrated to node 1. Currently the task gets moved to node 2. env.dst_nid points to the last node whose faults were greater than current node. Modify to set the preferred node based of best_cpu. Earlier setting preferred node was skipped if nr_active_nodes is 1. This could result in the task being moved out of the preferred node to a random node during regular load balancing. Also while modifying task_numa_migrate(), use sched_setnuma to set preferred node. This ensures out numa accounting is correct. Running SPECjbb2005 on a 4 node machine and comparing bops/JVM JVMS LAST_PATCH WITH_PATCH %CHANGE 16 25122.9 25549.6 1.698 1 73850 73190 -0.89 Running SPECjbb2005 on a 16 node machine and comparing bops/JVM JVMS LAST_PATCH WITH_PATCH %CHANGE 8 105930 113437 7.08676 1 178624 196130 9.80047 (numbers from v1 based on v4.17-rc5) Testcase Time: Min Max Avg StdDev numa01.sh Real: 435.78 653.81 534.58 83.20 numa01.sh Sys: 121.93 187.18 145.90 23.47 numa01.sh User: 37082.81 51402.80 43647.60 5409.75 numa02.sh Real: 60.64 61.63 61.19 0.40 numa02.sh Sys: 14.72 25.68 19.06 4.03 numa02.sh User: 5210.95 5266.69 5233.30 20.82 numa03.sh Real: 746.51 808.24 780.36 23.88 numa03.sh Sys: 97.26 108.48 105.07 4.28 numa03.sh User: 58956.30 61397.05 60162.95 1050.82 numa04.sh Real: 465.97 519.27 484.81 19.62 numa04.sh Sys: 304.43 359.08 334.68 20.64 numa04.sh User: 37544.16 41186.15 39262.44 1314.91 numa05.sh Real: 411.57 457.20 433.29 16.58 numa05.sh Sys: 230.05 435.48 339.95 67.58 numa05.sh User: 33325.54 36896.31 35637.84 1222.64 Testcase Time: Min Max Avg StdDev %Change numa01.sh Real: 506.35 794.46 599.06 104.26 -10.76% numa01.sh Sys: 150.37 223.56 195.99 24.94 -25.55% numa01.sh User: 43450.69 61752.04 49281.50 6635.33 -11.43% numa02.sh Real: 60.33 62.40 61.31 0.90 -0.195% numa02.sh Sys: 18.12 31.66 24.28 5.89 -21.49% numa02.sh User: 5203.91 5325.32 5260.29 49.98 -0.513% numa03.sh Real: 696.47 853.62 745.80 57.28 4.6339% numa03.sh Sys: 85.68 123.71 97.89 13.48 7.3347% numa03.sh User: 55978.45 66418.63 59254.94 3737.97 1.5323% numa04.sh Real: 444.05 514.83 497.06 26.85 -2.464% numa04.sh Sys: 230.39 375.79 316.23 48.58 5.8343% numa04.sh User: 35403.12 41004.10 39720.80 2163.08 -1.153% numa05.sh Real: 423.09 460.41 439.57 13.92 -1.428% numa05.sh Sys: 287.38 480.15 369.37 68.52 -7.964% numa05.sh User: 34732.12 38016.80 36255.85 1070.51 -1.704% Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1529514181-9842-5-git-send-email-srikar@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Srikar Dronamraju
|
5f95ba7a43 |
sched/numa: Simplify load_too_imbalanced()
Currently load_too_imbalance() cares about the slope of imbalance. It doesn't care of the direction of the imbalance. However this may not work if nodes that are being compared have dissimilar capacities. Few nodes might have more cores than other nodes in the system. Also unlike traditional load balance at a NUMA sched domain, multiple requests to migrate from the same source node to same destination node may run in parallel. This can cause huge load imbalance. This is specially true on a larger machines with either large cores per node or more number of nodes in the system. Hence allow move/swap only if the imbalance is going to reduce. Running SPECjbb2005 on a 4 node machine and comparing bops/JVM JVMS LAST_PATCH WITH_PATCH %CHANGE 16 25058.2 25122.9 0.25 1 72950 73850 1.23 (numbers from v1 based on v4.17-rc5) Testcase Time: Min Max Avg StdDev numa01.sh Real: 516.14 892.41 739.84 151.32 numa01.sh Sys: 153.16 192.99 177.70 14.58 numa01.sh User: 39821.04 69528.92 57193.87 10989.48 numa02.sh Real: 60.91 62.35 61.58 0.63 numa02.sh Sys: 16.47 26.16 21.20 3.85 numa02.sh User: 5227.58 5309.61 5265.17 31.04 numa03.sh Real: 739.07 917.73 795.75 64.45 numa03.sh Sys: 94.46 136.08 109.48 14.58 numa03.sh User: 57478.56 72014.09 61764.48 5343.69 numa04.sh Real: 442.61 715.43 530.31 96.12 numa04.sh Sys: 224.90 348.63 285.61 48.83 numa04.sh User: 35836.84 47522.47 40235.41 3985.26 numa05.sh Real: 386.13 489.17 434.94 43.59 numa05.sh Sys: 144.29 438.56 278.80 105.78 numa05.sh User: 33255.86 36890.82 34879.31 1641.98 Testcase Time: Min Max Avg StdDev %Change numa01.sh Real: 435.78 653.81 534.58 83.20 38.39% numa01.sh Sys: 121.93 187.18 145.90 23.47 21.79% numa01.sh User: 37082.81 51402.80 43647.60 5409.75 31.03% numa02.sh Real: 60.64 61.63 61.19 0.40 0.637% numa02.sh Sys: 14.72 25.68 19.06 4.03 11.22% numa02.sh User: 5210.95 5266.69 5233.30 20.82 0.608% numa03.sh Real: 746.51 808.24 780.36 23.88 1.972% numa03.sh Sys: 97.26 108.48 105.07 4.28 4.197% numa03.sh User: 58956.30 61397.05 60162.95 1050.82 2.661% numa04.sh Real: 465.97 519.27 484.81 19.62 9.385% numa04.sh Sys: 304.43 359.08 334.68 20.64 -14.6% numa04.sh User: 37544.16 41186.15 39262.44 1314.91 2.478% numa05.sh Real: 411.57 457.20 433.29 16.58 0.380% numa05.sh Sys: 230.05 435.48 339.95 67.58 -17.9% numa05.sh User: 33325.54 36896.31 35637.84 1222.64 -2.12% Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Rik van Riel <riel@surriel.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1529514181-9842-4-git-send-email-srikar@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Srikar Dronamraju
|
305c1fac32 |
sched/numa: Evaluate move once per node
task_numa_compare() helps choose the best CPU to move or swap the selected task. To achieve this task_numa_compare() is called for every CPU in the node. Currently it evaluates if the task can be moved/swapped for each of the CPUs. However the move evaluation is mostly independent of the CPU. Evaluating the move logic once per node, provides scope for simplifying task_numa_compare(). Running SPECjbb2005 on a 4 node machine and comparing bops/JVM JVMS LAST_PATCH WITH_PATCH %CHANGE 16 25705.2 25058.2 -2.51 1 74433 72950 -1.99 Running SPECjbb2005 on a 16 node machine and comparing bops/JVM JVMS LAST_PATCH WITH_PATCH %CHANGE 8 96589.6 105930 9.670 1 181830 178624 -1.76 (numbers from v1 based on v4.17-rc5) Testcase Time: Min Max Avg StdDev numa01.sh Real: 440.65 941.32 758.98 189.17 numa01.sh Sys: 183.48 320.07 258.42 50.09 numa01.sh User: 37384.65 71818.14 60302.51 13798.96 numa02.sh Real: 61.24 65.35 62.49 1.49 numa02.sh Sys: 16.83 24.18 21.40 2.60 numa02.sh User: 5219.59 5356.34 5264.03 49.07 numa03.sh Real: 822.04 912.40 873.55 37.35 numa03.sh Sys: 118.80 140.94 132.90 7.60 numa03.sh User: 62485.19 70025.01 67208.33 2967.10 numa04.sh Real: 690.66 872.12 778.49 65.44 numa04.sh Sys: 459.26 563.03 494.03 42.39 numa04.sh User: 51116.44 70527.20 58849.44 8461.28 numa05.sh Real: 418.37 562.28 525.77 54.27 numa05.sh Sys: 299.45 481.00 392.49 64.27 numa05.sh User: 34115.09 41324.02 39105.30 2627.68 Testcase Time: Min Max Avg StdDev %Change numa01.sh Real: 516.14 892.41 739.84 151.32 2.587% numa01.sh Sys: 153.16 192.99 177.70 14.58 45.42% numa01.sh User: 39821.04 69528.92 57193.87 10989.48 5.435% numa02.sh Real: 60.91 62.35 61.58 0.63 1.477% numa02.sh Sys: 16.47 26.16 21.20 3.85 0.943% numa02.sh User: 5227.58 5309.61 5265.17 31.04 -0.02% numa03.sh Real: 739.07 917.73 795.75 64.45 9.776% numa03.sh Sys: 94.46 136.08 109.48 14.58 21.39% numa03.sh User: 57478.56 72014.09 61764.48 5343.69 8.813% numa04.sh Real: 442.61 715.43 530.31 96.12 46.79% numa04.sh Sys: 224.90 348.63 285.61 48.83 72.97% numa04.sh User: 35836.84 47522.47 40235.41 3985.26 46.26% numa05.sh Real: 386.13 489.17 434.94 43.59 20.88% numa05.sh Sys: 144.29 438.56 278.80 105.78 40.77% numa05.sh User: 33255.86 36890.82 34879.31 1641.98 12.11% Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1529514181-9842-3-git-send-email-srikar@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
Yun Wang
|
3d6c50c27b |
sched/debug: Show the sum wait time of a task group
Although we can rely on cpuacct to present the CPU usage of task groups, it is hard to tell how intense the competition is between these groups on CPU resources. Monitoring the wait time or sched_debug of each process could be very expensive, and there is no good way to accurately represent the conflict with these info, we need the wait time on group dimension. Thus we introduce group's wait_sum to represent the resource conflict between task groups, which is simply the sum of the wait time of the group's cfs_rq. The 'cpu.stat' is modified to show the statistic, like: nr_periods 0 nr_throttled 0 throttled_time 0 wait_sum 2035098795584 Now we can monitor the changes of wait_sum to tell how much a a task group is suffering in the fight of CPU resources. For example: (wait_sum - last_wait_sum) * 100 / (nr_cpu * period_ns) == X% means the task group paid X percentage of period on waiting for the CPU. Signed-off-by: Michael Wang <yun.wang@linux.alibaba.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/ff7dae3b-e5f9-7157-1caa-ff02c6b23dc1@linux.alibaba.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Vincent Guittot
|
2e62c4743a |
sched/fair: Remove #ifdefs from scale_rt_capacity()
Reuse cpu_util_irq() that has been defined for schedutil and set irq util to 0 when !CONFIG_IRQ_TIME_ACCOUNTING. But the compiler is not able to optimize the sequence (at least with aarch64 GCC 7.2.1): free *= (max - irq); free /= max; when irq is fixed to 0 Add a new inline function scale_irq_capacity() that will scale utilization when irq is accounted. Reuse this funciton in schedutil which applies similar formula. Suggested-by: Ingo Molnar <mingo@redhat.com> Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: rjw@rjwysocki.net Link: http://lkml.kernel.org/r/1532001606-6689-1-git-send-email-vincent.guittot@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Ingo Molnar
|
4765096f4f |
Merge branch 'sched/urgent' into sched/core, to pick up fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
Hailong Liu
|
f3d133ee0a |
sched/rt: Restore rt_runtime after disabling RT_RUNTIME_SHARE
NO_RT_RUNTIME_SHARE feature is used to prevent a CPU borrow enough runtime with a spin-rt-task. However, if RT_RUNTIME_SHARE feature is enabled and rt_rq has borrowd enough rt_runtime at the beginning, rt_runtime can't be restored to its initial bandwidth rt_runtime after we disable RT_RUNTIME_SHARE. E.g. on my PC with 4 cores, procedure to reproduce: 1) Make sure RT_RUNTIME_SHARE is enabled cat /sys/kernel/debug/sched_features GENTLE_FAIR_SLEEPERS START_DEBIT NO_NEXT_BUDDY LAST_BUDDY CACHE_HOT_BUDDY WAKEUP_PREEMPTION NO_HRTICK NO_DOUBLE_TICK LB_BIAS NONTASK_CAPACITY TTWU_QUEUE NO_SIS_AVG_CPU SIS_PROP NO_WARN_DOUBLE_CLOCK RT_PUSH_IPI RT_RUNTIME_SHARE NO_LB_MIN ATTACH_AGE_LOAD WA_IDLE WA_WEIGHT WA_BIAS 2) Start a spin-rt-task ./loop_rr & 3) set affinity to the last cpu taskset -p 8 $pid_of_loop_rr 4) Observe that last cpu have borrowed enough runtime. cat /proc/sched_debug | grep rt_runtime .rt_runtime : 950.000000 .rt_runtime : 900.000000 .rt_runtime : 950.000000 .rt_runtime : 1000.000000 5) Disable RT_RUNTIME_SHARE echo NO_RT_RUNTIME_SHARE > /sys/kernel/debug/sched_features 6) Observe that rt_runtime can not been restored cat /proc/sched_debug | grep rt_runtime .rt_runtime : 950.000000 .rt_runtime : 900.000000 .rt_runtime : 950.000000 .rt_runtime : 1000.000000 This patch help to restore rt_runtime after we disable RT_RUNTIME_SHARE. Signed-off-by: Hailong Liu <liu.hailong6@zte.com.cn> Signed-off-by: Jiang Biao <jiang.biao2@zte.com.cn> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: zhong.weidong@zte.com.cn Link: http://lkml.kernel.org/r/1531874815-39357-1-git-send-email-liu.hailong6@zte.com.cn Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
Daniel Bristot de Oliveira
|
840d719604 |
sched/deadline: Update rq_clock of later_rq when pushing a task
Daniel Casini got this warn while running a DL task here at RetisLab:
[ 461.137582] ------------[ cut here ]------------
[ 461.137583] rq->clock_update_flags < RQCF_ACT_SKIP
[ 461.137599] WARNING: CPU: 4 PID: 2354 at kernel/sched/sched.h:967 assert_clock_updated.isra.32.part.33+0x17/0x20
[a ton of modules]
[ 461.137646] CPU: 4 PID: 2354 Comm: label_image Not tainted 4.18.0-rc4+ #3
[ 461.137647] Hardware name: ASUS All Series/Z87-K, BIOS 0801 09/02/2013
[ 461.137649] RIP: 0010:assert_clock_updated.isra.32.part.33+0x17/0x20
[ 461.137649] Code: ff 48 89 83 08 09 00 00 eb c6 66 0f 1f 84 00 00 00 00 00 55 48 c7 c7 98 7a 6c a5 c6 05 bc 0d 54 01 01 48 89 e5 e8 a9 84 fb ff <0f> 0b 5d c3 0f 1f 44 00 00 0f 1f 44 00 00 83 7e 60 01 74 0a 48 3b
[ 461.137673] RSP: 0018:ffffa77e08cafc68 EFLAGS: 00010082
[ 461.137674] RAX: 0000000000000000 RBX: ffff8b3fc1702d80 RCX: 0000000000000006
[ 461.137674] RDX: 0000000000000007 RSI: 0000000000000096 RDI: ffff8b3fded164b0
[ 461.137675] RBP: ffffa77e08cafc68 R08: 0000000000000026 R09: 0000000000000339
[ 461.137676] R10: ffff8b3fd060d410 R11: 0000000000000026 R12: ffffffffa4e14e20
[ 461.137677] R13: ffff8b3fdec22940 R14: ffff8b3fc1702da0 R15: ffff8b3fdec22940
[ 461.137678] FS: 00007efe43ee5700(0000) GS:ffff8b3fded00000(0000) knlGS:0000000000000000
[ 461.137679] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 461.137680] CR2: 00007efe30000010 CR3: 0000000301744003 CR4: 00000000001606e0
[ 461.137680] Call Trace:
[ 461.137684] push_dl_task.part.46+0x3bc/0x460
[ 461.137686] task_woken_dl+0x60/0x80
[ 461.137689] ttwu_do_wakeup+0x4f/0x150
[ 461.137690] ttwu_do_activate+0x77/0x80
[ 461.137692] try_to_wake_up+0x1d6/0x4c0
[ 461.137693] wake_up_q+0x32/0x70
[ 461.137696] do_futex+0x7e7/0xb50
[ 461.137698] __x64_sys_futex+0x8b/0x180
[ 461.137701] do_syscall_64+0x5a/0x110
[ 461.137703] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 461.137705] RIP: 0033:0x7efe4918ca26
[ 461.137705] Code: 00 00 00 74 17 49 8b 48 20 44 8b 59 10 41 83 e3 30 41 83 fb 20 74 1e be 85 00 00 00 41 ba 01 00 00 00 41 b9 01 00 00 04 0f 05 <48> 3d 01 f0 ff ff 73 1f 31 c0 c3 be 8c 00 00 00 49 89 c8 4d 31 d2
[ 461.137738] RSP: 002b:00007efe43ee4928 EFLAGS: 00000283 ORIG_RAX: 00000000000000ca
[ 461.137739] RAX: ffffffffffffffda RBX: 0000000005094df0 RCX: 00007efe4918ca26
[ 461.137740] RDX: 0000000000000001 RSI: 0000000000000085 RDI: 0000000005094e24
[ 461.137741] RBP: 00007efe43ee49c0 R08: 0000000005094e20 R09: 0000000004000001
[ 461.137741] R10: 0000000000000001 R11: 0000000000000283 R12: 0000000000000000
[ 461.137742] R13: 0000000005094df8 R14: 0000000000000001 R15: 0000000000448a10
[ 461.137743] ---[ end trace 187df4cad2bf7649 ]---
This warning happened in the push_dl_task(), because
__add_running_bw()->cpufreq_update_util() is getting the rq_clock of
the later_rq before its update, which takes place at activate_task().
The fix then is to update the rq_clock before calling add_running_bw().
To avoid double rq_clock_update() call, we set ENQUEUE_NOCLOCK flag to
activate_task().
Reported-by: Daniel Casini <daniel.casini@santannapisa.it>
Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luca Abeni <luca.abeni@santannapisa.it>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tommaso Cucinotta <tommaso.cucinotta@santannapisa.it>
Fixes:
|
||
Yi Wang
|
6cd0c583b0 |
sched/topology: Check variable group before dereferencing it
The 'group' variable in sched_domain_debug_one() is not checked when firstly used in cpumask_test_cpu(cpu, sched_group_span(group)), but it might be NULL (it is checked later in the following while loop) and may cause NULL pointer dereference. We need to check it before using to avoid NULL dereference. Signed-off-by: Yi Wang <wang.yi59@zte.com.cn> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Jiang Biao <jiang.biao2@zte.com.cn> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: zhong.weidong@zte.com.cn Link: http://lkml.kernel.org/r/1532319547-33335-1-git-send-email-wang.yi59@zte.com.cn Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Peter Zijlstra
|
9407f5a7ee |
sched/clock: Close a hole in sched_clock_init()
All data required for the 'unstable' sched_clock must be set-up _before_
enabling it -- setting sched_clock_running. This includes the
__gtod_offset but also a recent scd stamp.
Make the gtod-offset update also set the csd stamp -- it requires the
same two clock reads _anyway_. This doesn't hurt in the
sched_clock_tick_stable() case and ensures sched_clock_init() gets
everything set-up before use.
Also switch to unconditional IRQ-disable/enable because the static key
stuff already requires this is not ran with IRQs disabled.
Fixes:
|
||
|
Pavel Tatashin
|
46457ea464 |
sched/clock: Use static key for sched_clock_running
sched_clock_running may be read every time sched_clock_cpu() is called. Yet, this variable is updated only twice during boot, and never changes again, therefore it is better to make it a static key. Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: steven.sistare@oracle.com Cc: daniel.m.jordan@oracle.com Cc: linux@armlinux.org.uk Cc: schwidefsky@de.ibm.com Cc: heiko.carstens@de.ibm.com Cc: john.stultz@linaro.org Cc: sboyd@codeaurora.org Cc: hpa@zytor.com Cc: douly.fnst@cn.fujitsu.com Cc: prarit@redhat.com Cc: feng.tang@intel.com Cc: pmladek@suse.com Cc: gnomes@lxorguk.ukuu.org.uk Cc: linux-s390@vger.kernel.org Cc: boris.ostrovsky@oracle.com Cc: jgross@suse.com Cc: pbonzini@redhat.com Link: https://lkml.kernel.org/r/20180719205545.16512-25-pasha.tatashin@oracle.com |
||
|
Pavel Tatashin
|
857baa87b6 |
sched/clock: Enable sched clock early
Allow sched_clock() to be used before schec_clock_init() is called. This provides a way to get early boot timestamps on machines with unstable clocks. Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: steven.sistare@oracle.com Cc: daniel.m.jordan@oracle.com Cc: linux@armlinux.org.uk Cc: schwidefsky@de.ibm.com Cc: heiko.carstens@de.ibm.com Cc: john.stultz@linaro.org Cc: sboyd@codeaurora.org Cc: hpa@zytor.com Cc: douly.fnst@cn.fujitsu.com Cc: peterz@infradead.org Cc: prarit@redhat.com Cc: feng.tang@intel.com Cc: pmladek@suse.com Cc: gnomes@lxorguk.ukuu.org.uk Cc: linux-s390@vger.kernel.org Cc: boris.ostrovsky@oracle.com Cc: jgross@suse.com Cc: pbonzini@redhat.com Link: https://lkml.kernel.org/r/20180719205545.16512-24-pasha.tatashin@oracle.com |
||
|
Pavel Tatashin
|
5d2a4e91a5 |
sched/clock: Move sched clock initialization and merge with generic clock
sched_clock_postinit() initializes a generic clock on systems where no other clock is provided. This function may be called only after timekeeping_init(). Rename sched_clock_postinit to generic_clock_inti() and call it from sched_clock_init(). Move the call for sched_clock_init() until after time_init(). Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: steven.sistare@oracle.com Cc: daniel.m.jordan@oracle.com Cc: linux@armlinux.org.uk Cc: schwidefsky@de.ibm.com Cc: heiko.carstens@de.ibm.com Cc: john.stultz@linaro.org Cc: sboyd@codeaurora.org Cc: hpa@zytor.com Cc: douly.fnst@cn.fujitsu.com Cc: prarit@redhat.com Cc: feng.tang@intel.com Cc: pmladek@suse.com Cc: gnomes@lxorguk.ukuu.org.uk Cc: linux-s390@vger.kernel.org Cc: boris.ostrovsky@oracle.com Cc: jgross@suse.com Cc: pbonzini@redhat.com Link: https://lkml.kernel.org/r/20180719205545.16512-23-pasha.tatashin@oracle.com |
||
Andrea Parri
|
7696f9910a |
sched/Documentation: Update wake_up() & co. memory-barrier guarantees
Both the implementation and the users' expectation [1] for the various wakeup primitives have evolved over time, but the documentation has not kept up with these changes: brings it into 2018. [1] http://lkml.kernel.org/r/20180424091510.GB4064@hirez.programming.kicks-ass.net Also applied feedback from Alan Stern. Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Akira Yokosawa <akiyks@gmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Daniel Lustig <dlustig@nvidia.com> Cc: David Howells <dhowells@redhat.com> Cc: Jade Alglave <j.alglave@ucl.ac.uk> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luc Maranget <luc.maranget@inria.fr> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arch@vger.kernel.org Cc: parri.andrea@gmail.com Link: http://lkml.kernel.org/r/20180716180605.16115-12-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Andrea Parri
|
3d85b27037 |
locking/spinlock, sched/core: Clarify requirements for smp_mb__after_spinlock()
There are 11 interpretations of the requirements described in the header comment for smp_mb__after_spinlock(): one for each LKMM maintainer, and one currently encoded in the Cat file. Stick to the latter (until a more satisfactory solution is available). This also reworks some snippets related to the barrier to illustrate the requirements and to link them to the idioms which are relied upon at its call sites. Suggested-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: akiyks@gmail.com Cc: dhowells@redhat.com Cc: j.alglave@ucl.ac.uk Cc: linux-arch@vger.kernel.org Cc: luc.maranget@inria.fr Cc: npiggin@gmail.com Cc: parri.andrea@gmail.com Cc: stern@rowland.harvard.edu Link: http://lkml.kernel.org/r/20180716180605.16115-11-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Andrea Parri
|
76e079fefc |
sched/core: Use smp_mb() in wake_woken_function()
wake_woken_function() synchronizes with wait_woken() as follows:
[wait_woken] [wake_woken_function]
entry->flags &= ~wq_flag_woken; condition = true;
smp_mb(); smp_wmb();
if (condition) wq_entry->flags |= wq_flag_woken;
break;
This commit replaces the above smp_wmb() with an smp_mb() in order to
guarantee that either wait_woken() sees the wait condition being true
or the store to wq_entry->flags in woken_wake_function() follows the
store in wait_woken() in the coherence order (so that the former can
eventually be observed by wait_woken()).
The commit also fixes a comment associated to set_current_state() in
wait_woken(): the comment pairs the barrier in set_current_state() to
the above smp_wmb(), while the actual pairing involves the barrier in
set_current_state() and the barrier executed by the try_to_wake_up()
in wake_woken_function().
Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: akiyks@gmail.com
Cc: boqun.feng@gmail.com
Cc: dhowells@redhat.com
Cc: j.alglave@ucl.ac.uk
Cc: linux-arch@vger.kernel.org
Cc: luc.maranget@inria.fr
Cc: npiggin@gmail.com
Cc: parri.andrea@gmail.com
Cc: stern@rowland.harvard.edu
Cc: will.deacon@arm.com
Link: http://lkml.kernel.org/r/20180716180605.16115-10-paulmck@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
||
Sebastian Andrzej Siewior
|
af0fffd930 |
sched/core: Remove get_cpu() from sched_fork()
get_cpu() disables preemption for the entire sched_fork() function.
This get_cpu() was introduced in commit:
|
||
|
Peter Zijlstra
|
45f5519ec5 |
sched/cpufreq: Clarify sugov_get_util()
Add a few comments to (hopefully) clarifying some of the magic in sugov_get_util(). Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Morten.Rasmussen@arm.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: claudio@evidence.eu.com Cc: daniel.lezcano@linaro.org Cc: dietmar.eggemann@arm.com Cc: joel@joelfernandes.org Cc: juri.lelli@redhat.com Cc: luca.abeni@santannapisa.it Cc: patrick.bellasi@arm.com Cc: quentin.perret@arm.com Cc: rjw@rjwysocki.net Cc: valentin.schneider@arm.com Link: http://lkml.kernel.org/r/20180705123617.GM2458@hirez.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Vincent Guittot
|
5fd778915a |
sched/sysctl: Remove unused sched_time_avg_ms sysctl
/proc/sys/kernel/sched_time_avg_ms entry is not used anywhere, remove it. Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Luis R. Rodriguez <mcgrof@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Morten.Rasmussen@arm.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: claudio@evidence.eu.com Cc: daniel.lezcano@linaro.org Cc: dietmar.eggemann@arm.com Cc: joel@joelfernandes.org Cc: juri.lelli@redhat.com Cc: luca.abeni@santannapisa.it Cc: patrick.bellasi@arm.com Cc: quentin.perret@arm.com Cc: rjw@rjwysocki.net Cc: valentin.schneider@arm.com Cc: viresh.kumar@linaro.org Link: http://lkml.kernel.org/r/1530200714-4504-12-git-send-email-vincent.guittot@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Vincent Guittot
|
bbb62c0b02 |
sched/core: Remove the rt_avg code
rt_avg is not used anywhere anymore, so we can remove all related code. Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Morten.Rasmussen@arm.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: claudio@evidence.eu.com Cc: daniel.lezcano@linaro.org Cc: dietmar.eggemann@arm.com Cc: joel@joelfernandes.org Cc: juri.lelli@redhat.com Cc: luca.abeni@santannapisa.it Cc: patrick.bellasi@arm.com Cc: quentin.perret@arm.com Cc: rjw@rjwysocki.net Cc: valentin.schneider@arm.com Cc: viresh.kumar@linaro.org Link: http://lkml.kernel.org/r/1530200714-4504-11-git-send-email-vincent.guittot@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Vincent Guittot
|
523e979d31 |
sched/core: Use PELT for scale_rt_capacity()
The utilization of the CPU by RT, DL and IRQs are now tracked with PELT so we can use these metrics instead of rt_avg to evaluate the remaining capacity available for CFS class. scale_rt_capacity() behavior has been changed and now returns the remaining capacity available for CFS instead of a scaling factor because RT, DL and IRQ provide now absolute utilization value. The same formula as schedutil is used: IRQ util_avg + (1 - IRQ util_avg / max capacity ) * /Sum rq util_avg but the implementation is different because it doesn't return the same value and doesn't benefit of the same optimization. Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Morten.Rasmussen@arm.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: claudio@evidence.eu.com Cc: daniel.lezcano@linaro.org Cc: dietmar.eggemann@arm.com Cc: joel@joelfernandes.org Cc: juri.lelli@redhat.com Cc: luca.abeni@santannapisa.it Cc: patrick.bellasi@arm.com Cc: quentin.perret@arm.com Cc: rjw@rjwysocki.net Cc: valentin.schneider@arm.com Cc: viresh.kumar@linaro.org Link: http://lkml.kernel.org/r/1530200714-4504-10-git-send-email-vincent.guittot@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Vincent Guittot
|
dfa444dc2f |
sched/cpufreq: Remove sugov_aggregate_util()
There is no reason why sugov_get_util() and sugov_aggregate_util() were in fact separate functions. Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> [ Rebased after adding irq tracking and fixed some compilation errors. ] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Morten.Rasmussen@arm.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: claudio@evidence.eu.com Cc: daniel.lezcano@linaro.org Cc: dietmar.eggemann@arm.com Cc: joel@joelfernandes.org Cc: juri.lelli@redhat.com Cc: luca.abeni@santannapisa.it Cc: patrick.bellasi@arm.com Cc: quentin.perret@arm.com Cc: rjw@rjwysocki.net Cc: valentin.schneider@arm.com Link: http://lkml.kernel.org/r/1530200714-4504-9-git-send-email-vincent.guittot@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Vincent Guittot
|
9033ea1188 |
cpufreq/schedutil: Take time spent in interrupts into account
The time spent executing IRQ handlers can be significant but it is not reflected in the utilization of CPU when deciding to choose an OPP. Now that we have access to this metric, schedutil can take it into account when selecting the OPP for a CPU. RQS utilization don't see the time spend under interrupt context and report their value in the normal context time window. We need to compensate this when adding interrupt utilization The CPU utilization is: IRQ util_avg + (1 - IRQ util_avg / max capacity ) * /Sum rq util_avg A test with iperf on hikey (octo arm64) gives the following speedup: iperf -c server_address -r -t 5 w/o patch w/ patch Tx 276 Mbits/sec 304 Mbits/sec +10% Rx 299 Mbits/sec 328 Mbits/sec +9% 8 iterations stdev is lower than 1% Only WFI idle state is enabled (shallowest idle state). Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Morten.Rasmussen@arm.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: claudio@evidence.eu.com Cc: daniel.lezcano@linaro.org Cc: dietmar.eggemann@arm.com Cc: joel@joelfernandes.org Cc: juri.lelli@redhat.com Cc: luca.abeni@santannapisa.it Cc: patrick.bellasi@arm.com Cc: quentin.perret@arm.com Cc: rjw@rjwysocki.net Cc: valentin.schneider@arm.com Link: http://lkml.kernel.org/r/1530200714-4504-8-git-send-email-vincent.guittot@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Vincent Guittot
|
91c27493e7 |
sched/irq: Add IRQ utilization tracking
interrupt and steal time are the only remaining activities tracked by rt_avg. Like for sched classes, we can use PELT to track their average utilization of the CPU. But unlike sched class, we don't track when entering/leaving interrupt; Instead, we take into account the time spent under interrupt context when we update rqs' clock (rq_clock_task). This also means that we have to decay the normal context time and account for interrupt time during the update. That's also important to note that because: rq_clock == rq_clock_task + interrupt time and rq_clock_task is used by a sched class to compute its utilization, the util_avg of a sched class only reflects the utilization of the time spent in normal context and not of the whole time of the CPU. The utilization of interrupt gives an more accurate level of utilization of CPU. The CPU utilization is: avg_irq + (1 - avg_irq / max capacity) * /Sum avg_rq Most of the time, avg_irq is small and neglictible so the use of the approximation CPU utilization = /Sum avg_rq was enough. Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Morten.Rasmussen@arm.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: claudio@evidence.eu.com Cc: daniel.lezcano@linaro.org Cc: dietmar.eggemann@arm.com Cc: joel@joelfernandes.org Cc: juri.lelli@redhat.com Cc: luca.abeni@santannapisa.it Cc: patrick.bellasi@arm.com Cc: quentin.perret@arm.com Cc: rjw@rjwysocki.net Cc: valentin.schneider@arm.com Cc: viresh.kumar@linaro.org Link: http://lkml.kernel.org/r/1530200714-4504-7-git-send-email-vincent.guittot@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Vincent Guittot
|
8cc90515a4 |
cpufreq/schedutil: Use DL utilization tracking
Now that we have both the DL class bandwidth requirement and the DL class utilization, we can detect when CPU is fully used so we should run at max. Otherwise, we keep using the DL bandwidth requirement to define the utilization of the CPU. Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Morten.Rasmussen@arm.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: claudio@evidence.eu.com Cc: daniel.lezcano@linaro.org Cc: dietmar.eggemann@arm.com Cc: joel@joelfernandes.org Cc: juri.lelli@redhat.com Cc: luca.abeni@santannapisa.it Cc: patrick.bellasi@arm.com Cc: quentin.perret@arm.com Cc: rjw@rjwysocki.net Cc: valentin.schneider@arm.com Link: http://lkml.kernel.org/r/1530200714-4504-6-git-send-email-vincent.guittot@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Vincent Guittot
|
3727e0e163 |
sched/dl: Add dl_rq utilization tracking
Similarly to what happens with RT tasks, CFS tasks can be preempted by DL tasks and the CFS's utilization might no longer describes the real utilization level. Current DL bandwidth reflects the requirements to meet deadline when tasks are enqueued but not the current utilization of the DL sched class. We track DL class utilization to estimate the system utilization. Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Morten.Rasmussen@arm.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: claudio@evidence.eu.com Cc: daniel.lezcano@linaro.org Cc: dietmar.eggemann@arm.com Cc: joel@joelfernandes.org Cc: juri.lelli@redhat.com Cc: luca.abeni@santannapisa.it Cc: patrick.bellasi@arm.com Cc: quentin.perret@arm.com Cc: rjw@rjwysocki.net Cc: valentin.schneider@arm.com Cc: viresh.kumar@linaro.org Link: http://lkml.kernel.org/r/1530200714-4504-5-git-send-email-vincent.guittot@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Vincent Guittot
|
3ae117c6cd |
cpufreq/schedutil: Use RT utilization tracking
Add both CFS and RT utilization when selecting an OPP for CFS tasks as RT can preempt and steal CFS's running time. RT util_avg is used to take into account the utilization of RT tasks on the CPU when selecting OPP. If a RT task migrate, the RT utilization will not migrate but will decay over time. On an overloaded CPU, CFS utilization reflects the remaining utilization avialable on CPU. When RT task migrates, the CFS utilization will increase when tasks will start to use the newly available capacity. At the same pace, RT utilization will decay and both variations will compensate each other to keep unchanged overall utilization and will prevent any OPP drop. Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Morten.Rasmussen@arm.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: claudio@evidence.eu.com Cc: daniel.lezcano@linaro.org Cc: dietmar.eggemann@arm.com Cc: joel@joelfernandes.org Cc: juri.lelli@redhat.com Cc: luca.abeni@santannapisa.it Cc: patrick.bellasi@arm.com Cc: quentin.perret@arm.com Cc: rjw@rjwysocki.net Cc: valentin.schneider@arm.com Link: http://lkml.kernel.org/r/1530200714-4504-4-git-send-email-vincent.guittot@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Vincent Guittot
|
371bf42732 |
sched/rt: Add rt_rq utilization tracking
schedutil governor relies on cfs_rq's util_avg to choose the OPP when CFS tasks are running. When the CPU is overloaded by CFS and RT tasks, CFS tasks are preempted by RT tasks and in this case util_avg reflects the remaining capacity but not what CFS want to use. In such case, schedutil can select a lower OPP whereas the CPU is overloaded. In order to have a more accurate view of the utilization of the CPU, we track the utilization of RT tasks. Only util_avg is correctly tracked but not load_avg and runnable_load_avg which are useless for rt_rq. rt_rq uses rq_clock_task and cfs_rq uses cfs_rq_clock_task but they are the same at the root group level, so the PELT windows of the util_sum are aligned. Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Morten.Rasmussen@arm.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: claudio@evidence.eu.com Cc: daniel.lezcano@linaro.org Cc: dietmar.eggemann@arm.com Cc: joel@joelfernandes.org Cc: juri.lelli@redhat.com Cc: luca.abeni@santannapisa.it Cc: patrick.bellasi@arm.com Cc: quentin.perret@arm.com Cc: rjw@rjwysocki.net Cc: valentin.schneider@arm.com Cc: viresh.kumar@linaro.org Link: http://lkml.kernel.org/r/1530200714-4504-3-git-send-email-vincent.guittot@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Vincent Guittot
|
c079629862 |
sched/pelt: Move PELT related code in a dedicated file
We want to track rt_rq's utilization as a part of the estimation of the whole rq's utilization. This is necessary because rt tasks can steal utilization to cfs tasks and make them lighter than they are. As we want to use the same load tracking mecanism for both and prevent useless dependency between cfs and rt code, PELT code is moved in a dedicated file. Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Morten.Rasmussen@arm.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: claudio@evidence.eu.com Cc: daniel.lezcano@linaro.org Cc: dietmar.eggemann@arm.com Cc: joel@joelfernandes.org Cc: juri.lelli@redhat.com Cc: luca.abeni@santannapisa.it Cc: patrick.bellasi@arm.com Cc: quentin.perret@arm.com Cc: rjw@rjwysocki.net Cc: valentin.schneider@arm.com Cc: viresh.kumar@linaro.org Link: http://lkml.kernel.org/r/1530200714-4504-2-git-send-email-vincent.guittot@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
Quentin Perret
|
8fe5c5a937 |
sched/fair: Fix util_avg of new tasks for asymmetric systems
When a new task wakes-up for the first time, its initial utilization is set to half of the spare capacity of its CPU. The current implementation of post_init_entity_util_avg() uses SCHED_CAPACITY_SCALE directly as a capacity reference. As a result, on a big.LITTLE system, a new task waking up on an idle little CPU will be given ~512 of util_avg, even if the CPU's capacity is significantly less than that. Fix this by computing the spare capacity with arch_scale_cpu_capacity(). Signed-off-by: Quentin Perret <quentin.perret@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Vincent Guittot <vincent.guittot@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dietmar.eggemann@arm.com Cc: morten.rasmussen@arm.com Cc: patrick.bellasi@arm.com Link: http://lkml.kernel.org/r/20180612112215.25448-1-quentin.perret@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
Juri Lelli
|
e117cb52bd |
sched/deadline: Fix switched_from_dl() warning
Mark noticed that syzkaller is able to reliably trigger the following warning: dl_rq->running_bw > dl_rq->this_bw WARNING: CPU: 1 PID: 153 at kernel/sched/deadline.c:124 switched_from_dl+0x454/0x608 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 153 Comm: syz-executor253 Not tainted 4.18.0-rc3+ #29 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x0/0x458 show_stack+0x20/0x30 dump_stack+0x180/0x250 panic+0x2dc/0x4ec __warn_printk+0x0/0x150 report_bug+0x228/0x2d8 bug_handler+0xa0/0x1a0 brk_handler+0x2f0/0x568 do_debug_exception+0x1bc/0x5d0 el1_dbg+0x18/0x78 switched_from_dl+0x454/0x608 __sched_setscheduler+0x8cc/0x2018 sys_sched_setattr+0x340/0x758 el0_svc_naked+0x30/0x34 syzkaller reproducer runs a bunch of threads that constantly switch between DEADLINE and NORMAL classes while interacting through futexes. The splat above is caused by the fact that if a DEADLINE task is setattr back to NORMAL while in non_contending state (blocked on a futex - inactive timer armed), its contribution to running_bw is not removed before sub_rq_bw() gets called (!task_on_rq_queued() branch) and the latter sees running_bw > this_bw. Fix it by removing a task contribution from running_bw if the task is not queued and in non_contending state while switched to a different class. Reported-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Juri Lelli <juri.lelli@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com> Reviewed-by: Luca Abeni <luca.abeni@santannapisa.it> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: claudio@evidence.eu.com Cc: rostedt@goodmis.org Link: http://lkml.kernel.org/r/20180711072948.27061-1-juri.lelli@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Ingo Molnar
|
4520843dfa |
Merge branch 'sched/urgent' into sched/core, to pick up fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Peter Zijlstra
|
1cef1150ef |
kthread, sched/core: Fix kthread_parkme() (again...)
Gaurav reports that commit: |
||
|
Vincent Guittot
|
3482d98bbc |
sched/util_est: Fix util_est_dequeue() for throttled cfs_rq
When a cfs_rq is throttled, parent cfs_rq->nr_running is decreased and
everything happens at cfs_rq level. Currently util_est stays unchanged
in such case and it keeps accounting the utilization of throttled tasks.
This can somewhat make sense as we don't dequeue tasks but only throttled
cfs_rq.
If a task of another group is enqueued/dequeued and root cfs_rq becomes
idle during the dequeue, util_est will be cleared whereas it was
accounting util_est of throttled tasks before. So the behavior of util_est
is not always the same regarding throttled tasks and depends of side
activity. Furthermore, util_est will not be updated when the cfs_rq is
unthrottled as everything happens at cfs_rq level. Main results is that
util_est will stay null whereas we now have running tasks. We have to wait
for the next dequeue/enqueue of the previously throttled tasks to get an
up to date util_est.
Remove the assumption that cfs_rq's estimated utilization of a CPU is 0
if there is no running task so the util_est of a task remains until the
latter is dequeued even if its cfs_rq has been throttled.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Patrick Bellasi <patrick.bellasi@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes:
|
||
Xunlei Pang
|
f1d1be8aee |
sched/fair: Advance global expiration when period timer is restarted
When period gets restarted after some idle time, start_cfs_bandwidth() doesn't update the expiration information, expire_cfs_rq_runtime() will see cfs_rq->runtime_expires smaller than rq clock and go to the clock drift logic, wasting needless CPU cycles on the scheduler hot path. Update the global expiration in start_cfs_bandwidth() to avoid frequent expire_cfs_rq_runtime() calls once a new period begins. Signed-off-by: Xunlei Pang <xlpang@linux.alibaba.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Ben Segall <bsegall@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20180620101834.24455-2-xlpang@linux.alibaba.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Xunlei Pang
|
512ac999d2 |
sched/fair: Fix bandwidth timer clock drift condition
I noticed that cgroup task groups constantly get throttled even
if they have low CPU usage, this causes some jitters on the response
time to some of our business containers when enabling CPU quotas.
It's very simple to reproduce:
mkdir /sys/fs/cgroup/cpu/test
cd /sys/fs/cgroup/cpu/test
echo 100000 > cpu.cfs_quota_us
echo $$ > tasks
then repeat:
cat cpu.stat | grep nr_throttled # nr_throttled will increase steadily
After some analysis, we found that cfs_rq::runtime_remaining will
be cleared by expire_cfs_rq_runtime() due to two equal but stale
"cfs_{b|q}->runtime_expires" after period timer is re-armed.
The current condition to judge clock drift in expire_cfs_rq_runtime()
is wrong, the two runtime_expires are actually the same when clock
drift happens, so this condtion can never hit. The orginal design was
correctly done by this commit:
|
||
|
Vincent Guittot
|
296b2ffe7f |
sched/rt: Fix call to cpufreq_update_util()
With commit: |
||
Frederic Weisbecker
|
d9c0ffcabd |
sched/nohz: Skip remote tick on idle task entirely
Some people have reported that the warning in sched_tick_remote() occasionally triggers, especially in favour of some RCU-Torture pressure: WARNING: CPU: 11 PID: 906 at kernel/sched/core.c:3138 sched_tick_remote+0xb6/0xc0 Modules linked in: CPU: 11 PID: 906 Comm: kworker/u32:3 Not tainted 4.18.0-rc2+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 Workqueue: events_unbound sched_tick_remote RIP: 0010:sched_tick_remote+0xb6/0xc0 Code: e8 0f 06 b8 00 c6 03 00 fb eb 9d 8b 43 04 85 c0 75 8d 48 8b 83 e0 0a 00 00 48 85 c0 75 81 eb 88 48 89 df e8 bc fe ff ff eb aa <0f> 0b eb +c5 66 0f 1f 44 00 00 bf 17 00 00 00 e8 b6 2e fe ff 0f b6 Call Trace: process_one_work+0x1df/0x3b0 worker_thread+0x44/0x3d0 kthread+0xf3/0x130 ? set_worker_desc+0xb0/0xb0 ? kthread_create_worker_on_cpu+0x70/0x70 ret_from_fork+0x35/0x40 This happens when the remote tick applies on an idle task. Usually the idle_cpu() check avoids that, but it is performed before we lock the runqueue and it is therefore racy. It was intended to be that way in order to prevent from useless runqueue locks since idle task tick callback is a no-op. Now if the racy check slips out of our hands and we end up remotely ticking an idle task, the empty task_tick_idle() is harmless. Still it won't pass the WARN_ON_ONCE() test that ensures rq_clock_task() is not too far from curr->se.exec_start because update_curr_idle() doesn't update the exec_start value like other scheduler policies. Hence the reported false positive. So let's have another check, while the rq is locked, to make sure we don't remote tick on an idle task. The lockless idle_cpu() still applies to avoid unecessary rq lock contention. Reported-by: Jacek Tomaka <jacekt@dug.com> Reported-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reported-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1530203381-31234-1-git-send-email-frederic@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
Li RongQing
|
03585a95cd |
sched/fair: Remove stale tg_unthrottle_up() comments
After commit:
|
||
Yisheng Xie
|
8f894bf47d |
sched/debug: Use match_string() helper instead of open-coded logic
match_string() returns the index of an array for a matching string, which can be used instead of the open coded variant. Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/lkml/1527765086-19873-15-git-send-email-xieyisheng1@huawei.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Peter Zijlstra
|
ba2591a599 |
sched/smt: Update sched_smt_present at runtime
The static key sched_smt_present is only updated at boot time when SMT siblings have been detected. Booting with maxcpus=1 and bringing the siblings online after boot rebuilds the scheduling domains correctly but does not update the static key, so the SMT code is not enabled. Let the key be updated in the scheduler CPU hotplug code to fix this. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Ingo Molnar <mingo@kernel.org> |
||
|
Peter Zijlstra
|
b3dae109fa |
sched/swait: Rename to exclusive
Since swait basically implemented exclusive waits only, make sure
the API reflects that.
$ git grep -l -e "\<swake_up\>"
-e "\<swait_event[^ (]*"
-e "\<prepare_to_swait\>" | while read file;
do
sed -i -e 's/\<swake_up\>/&_one/g'
-e 's/\<swait_event[^ (]*/&_exclusive/g'
-e 's/\<prepare_to_swait\>/&_exclusive/g' $file;
done
With a few manual touch-ups.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: bigeasy@linutronix.de
Cc: oleg@redhat.com
Cc: paulmck@linux.vnet.ibm.com
Cc: pbonzini@redhat.com
Link: https://lkml.kernel.org/r/20180612083909.261946548@infradead.org
|
||
|
Peter Zijlstra
|
0abf17bc77 |
sched/swait: Switch to full exclusive mode
Linus noted that swait basically implements exclusive mode -- because swake_up() only wakes a single waiter. And because of that it should take care to properly deal with the interruptible case. In short, the problem is that swake_up() can race with a signal. In this this case it is possible the swake_up() 'wakes' the waiter that is already on the way out because it just got a signal and the wakeup gets lost. The normal wait code is very careful and avoids this situation, make sure we do too. Copy the exact exclusive semantics from wait. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: bigeasy@linutronix.de Cc: oleg@redhat.com Cc: paulmck@linux.vnet.ibm.com Cc: pbonzini@redhat.com Link: https://lkml.kernel.org/r/20180612083909.209762413@infradead.org |
||
|
Peter Zijlstra
|
6519750210 |
sched/swait: Remove __prepare_to_swait
There is no public user of this API, remove it. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: bigeasy@linutronix.de Cc: oleg@redhat.com Cc: paulmck@linux.vnet.ibm.com Cc: pbonzini@redhat.com Link: https://lkml.kernel.org/r/20180612083909.157076812@infradead.org |
||
Mark Rutland
|
0ed557aa81 |
sched/core / kcov: avoid kcov_area during task switch
During a context switch, we first switch_mm() to the next task's mm,
then switch_to() that new task. This means that vmalloc'd regions which
had previously been faulted in can transiently disappear in the context
of the prev task.
Functions instrumented by KCOV may try to access a vmalloc'd kcov_area
during this window, and as the fault handling code is instrumented, this
results in a recursive fault.
We must avoid accessing any kcov_area during this window. We can do so
with a new flag in kcov_mode, set prior to switching the mm, and cleared
once the new task is live. Since task_struct::kcov_mode isn't always a
specific enum kcov_mode value, this is made an unsigned int.
The manipulation is hidden behind kcov_{prepare,finish}_switch() helpers,
which are empty for !CONFIG_KCOV kernels.
The code uses macros because I can't use static inline functions without a
circular include dependency between <linux/sched.h> and <linux/kcov.h>,
since the definition of task_struct uses things defined in <linux/kcov.h>
Link: http://lkml.kernel.org/r/20180504135535.53744-4-mark.rutland@arm.com
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
Kees Cook
|
6396bb2215 |
treewide: kzalloc() -> kcalloc()
The kzalloc() function has a 2-factor argument form, kcalloc(). This
patch replaces cases of:
kzalloc(a * b, gfp)
with:
kcalloc(a * b, gfp)
as well as handling cases of:
kzalloc(a * b * c, gfp)
with:
kzalloc(array3_size(a, b, c), gfp)
as it's slightly less ugly than:
kzalloc_array(array_size(a, b), c, gfp)
This does, however, attempt to ignore constant size factors like:
kzalloc(4 * 1024, gfp)
though any constants defined via macros get caught up in the conversion.
Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.
The Coccinelle script used for this was:
// Fix redundant parens around sizeof().
@@
type TYPE;
expression THING, E;
@@
(
kzalloc(
- (sizeof(TYPE)) * E
+ sizeof(TYPE) * E
, ...)
|
kzalloc(
- (sizeof(THING)) * E
+ sizeof(THING) * E
, ...)
)
// Drop single-byte sizes and redundant parens.
@@
expression COUNT;
typedef u8;
typedef __u8;
@@
(
kzalloc(
- sizeof(u8) * (COUNT)
+ COUNT
, ...)
|
kzalloc(
- sizeof(__u8) * (COUNT)
+ COUNT
, ...)
|
kzalloc(
- sizeof(char) * (COUNT)
+ COUNT
, ...)
|
kzalloc(
- sizeof(unsigned char) * (COUNT)
+ COUNT
, ...)
|
kzalloc(
- sizeof(u8) * COUNT
+ COUNT
, ...)
|
kzalloc(
- sizeof(__u8) * COUNT
+ COUNT
, ...)
|
kzalloc(
- sizeof(char) * COUNT
+ COUNT
, ...)
|
kzalloc(
- sizeof(unsigned char) * COUNT
+ COUNT
, ...)
)
// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@
(
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * (COUNT_ID)
+ COUNT_ID, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * COUNT_ID
+ COUNT_ID, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * (COUNT_CONST)
+ COUNT_CONST, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * COUNT_CONST
+ COUNT_CONST, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * (COUNT_ID)
+ COUNT_ID, sizeof(THING)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * COUNT_ID
+ COUNT_ID, sizeof(THING)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * (COUNT_CONST)
+ COUNT_CONST, sizeof(THING)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * COUNT_CONST
+ COUNT_CONST, sizeof(THING)
, ...)
)
// 2-factor product, only identifiers.
@@
identifier SIZE, COUNT;
@@
- kzalloc
+ kcalloc
(
- SIZE * COUNT
+ COUNT, SIZE
, ...)
// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@
(
kzalloc(
- sizeof(TYPE) * (COUNT) * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kzalloc(
- sizeof(TYPE) * (COUNT) * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kzalloc(
- sizeof(TYPE) * COUNT * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kzalloc(
- sizeof(TYPE) * COUNT * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kzalloc(
- sizeof(THING) * (COUNT) * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
kzalloc(
- sizeof(THING) * (COUNT) * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
kzalloc(
- sizeof(THING) * COUNT * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
kzalloc(
- sizeof(THING) * COUNT * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
)
// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@
(
kzalloc(
- sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+ array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
, ...)
|
kzalloc(
- sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
, ...)
|
kzalloc(
- sizeof(THING1) * sizeof(THING2) * COUNT
+ array3_size(COUNT, sizeof(THING1), sizeof(THING2))
, ...)
|
kzalloc(
- sizeof(THING1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(THING1), sizeof(THING2))
, ...)
|
kzalloc(
- sizeof(TYPE1) * sizeof(THING2) * COUNT
+ array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
, ...)
|
kzalloc(
- sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
, ...)
)
// 3-factor product, only identifiers, with redundant parens removed.
@@
identifier STRIDE, SIZE, COUNT;
@@
(
kzalloc(
- (COUNT) * STRIDE * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- COUNT * (STRIDE) * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- COUNT * STRIDE * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- (COUNT) * (STRIDE) * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- COUNT * (STRIDE) * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- (COUNT) * STRIDE * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- (COUNT) * (STRIDE) * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- COUNT * STRIDE * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
)
// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression E1, E2, E3;
constant C1, C2, C3;
@@
(
kzalloc(C1 * C2 * C3, ...)
|
kzalloc(
- (E1) * E2 * E3
+ array3_size(E1, E2, E3)
, ...)
|
kzalloc(
- (E1) * (E2) * E3
+ array3_size(E1, E2, E3)
, ...)
|
kzalloc(
- (E1) * (E2) * (E3)
+ array3_size(E1, E2, E3)
, ...)
|
kzalloc(
- E1 * E2 * E3
+ array3_size(E1, E2, E3)
, ...)
)
// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@
(
kzalloc(sizeof(THING) * C2, ...)
|
kzalloc(sizeof(TYPE) * C2, ...)
|
kzalloc(C1 * C2 * C3, ...)
|
kzalloc(C1 * C2, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * (E2)
+ E2, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * E2
+ E2, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * (E2)
+ E2, sizeof(THING)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * E2
+ E2, sizeof(THING)
, ...)
|
- kzalloc
+ kcalloc
(
- (E1) * E2
+ E1, E2
, ...)
|
- kzalloc
+ kcalloc
(
- (E1) * (E2)
+ E1, E2
, ...)
|
- kzalloc
+ kcalloc
(
- E1 * E2
+ E1, E2
, ...)
)
Signed-off-by: Kees Cook <keescook@chromium.org>
|
||
|
Kees Cook
|
6da2ec5605 |
treewide: kmalloc() -> kmalloc_array()
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This
patch replaces cases of:
kmalloc(a * b, gfp)
with:
kmalloc_array(a * b, gfp)
as well as handling cases of:
kmalloc(a * b * c, gfp)
with:
kmalloc(array3_size(a, b, c), gfp)
as it's slightly less ugly than:
kmalloc_array(array_size(a, b), c, gfp)
This does, however, attempt to ignore constant size factors like:
kmalloc(4 * 1024, gfp)
though any constants defined via macros get caught up in the conversion.
Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.
The tools/ directory was manually excluded, since it has its own
implementation of kmalloc().
The Coccinelle script used for this was:
// Fix redundant parens around sizeof().
@@
type TYPE;
expression THING, E;
@@
(
kmalloc(
- (sizeof(TYPE)) * E
+ sizeof(TYPE) * E
, ...)
|
kmalloc(
- (sizeof(THING)) * E
+ sizeof(THING) * E
, ...)
)
// Drop single-byte sizes and redundant parens.
@@
expression COUNT;
typedef u8;
typedef __u8;
@@
(
kmalloc(
- sizeof(u8) * (COUNT)
+ COUNT
, ...)
|
kmalloc(
- sizeof(__u8) * (COUNT)
+ COUNT
, ...)
|
kmalloc(
- sizeof(char) * (COUNT)
+ COUNT
, ...)
|
kmalloc(
- sizeof(unsigned char) * (COUNT)
+ COUNT
, ...)
|
kmalloc(
- sizeof(u8) * COUNT
+ COUNT
, ...)
|
kmalloc(
- sizeof(__u8) * COUNT
+ COUNT
, ...)
|
kmalloc(
- sizeof(char) * COUNT
+ COUNT
, ...)
|
kmalloc(
- sizeof(unsigned char) * COUNT
+ COUNT
, ...)
)
// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@
(
- kmalloc
+ kmalloc_array
(
- sizeof(TYPE) * (COUNT_ID)
+ COUNT_ID, sizeof(TYPE)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(TYPE) * COUNT_ID
+ COUNT_ID, sizeof(TYPE)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(TYPE) * (COUNT_CONST)
+ COUNT_CONST, sizeof(TYPE)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(TYPE) * COUNT_CONST
+ COUNT_CONST, sizeof(TYPE)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(THING) * (COUNT_ID)
+ COUNT_ID, sizeof(THING)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(THING) * COUNT_ID
+ COUNT_ID, sizeof(THING)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(THING) * (COUNT_CONST)
+ COUNT_CONST, sizeof(THING)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(THING) * COUNT_CONST
+ COUNT_CONST, sizeof(THING)
, ...)
)
// 2-factor product, only identifiers.
@@
identifier SIZE, COUNT;
@@
- kmalloc
+ kmalloc_array
(
- SIZE * COUNT
+ COUNT, SIZE
, ...)
// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@
(
kmalloc(
- sizeof(TYPE) * (COUNT) * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kmalloc(
- sizeof(TYPE) * (COUNT) * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kmalloc(
- sizeof(TYPE) * COUNT * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kmalloc(
- sizeof(TYPE) * COUNT * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kmalloc(
- sizeof(THING) * (COUNT) * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
kmalloc(
- sizeof(THING) * (COUNT) * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
kmalloc(
- sizeof(THING) * COUNT * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
kmalloc(
- sizeof(THING) * COUNT * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
)
// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@
(
kmalloc(
- sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+ array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
, ...)
|
kmalloc(
- sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
, ...)
|
kmalloc(
- sizeof(THING1) * sizeof(THING2) * COUNT
+ array3_size(COUNT, sizeof(THING1), sizeof(THING2))
, ...)
|
kmalloc(
- sizeof(THING1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(THING1), sizeof(THING2))
, ...)
|
kmalloc(
- sizeof(TYPE1) * sizeof(THING2) * COUNT
+ array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
, ...)
|
kmalloc(
- sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
, ...)
)
// 3-factor product, only identifiers, with redundant parens removed.
@@
identifier STRIDE, SIZE, COUNT;
@@
(
kmalloc(
- (COUNT) * STRIDE * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kmalloc(
- COUNT * (STRIDE) * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kmalloc(
- COUNT * STRIDE * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kmalloc(
- (COUNT) * (STRIDE) * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kmalloc(
- COUNT * (STRIDE) * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kmalloc(
- (COUNT) * STRIDE * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kmalloc(
- (COUNT) * (STRIDE) * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kmalloc(
- COUNT * STRIDE * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
)
// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression E1, E2, E3;
constant C1, C2, C3;
@@
(
kmalloc(C1 * C2 * C3, ...)
|
kmalloc(
- (E1) * E2 * E3
+ array3_size(E1, E2, E3)
, ...)
|
kmalloc(
- (E1) * (E2) * E3
+ array3_size(E1, E2, E3)
, ...)
|
kmalloc(
- (E1) * (E2) * (E3)
+ array3_size(E1, E2, E3)
, ...)
|
kmalloc(
- E1 * E2 * E3
+ array3_size(E1, E2, E3)
, ...)
)
// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@
(
kmalloc(sizeof(THING) * C2, ...)
|
kmalloc(sizeof(TYPE) * C2, ...)
|
kmalloc(C1 * C2 * C3, ...)
|
kmalloc(C1 * C2, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(TYPE) * (E2)
+ E2, sizeof(TYPE)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(TYPE) * E2
+ E2, sizeof(TYPE)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(THING) * (E2)
+ E2, sizeof(THING)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(THING) * E2
+ E2, sizeof(THING)
, ...)
|
- kmalloc
+ kmalloc_array
(
- (E1) * E2
+ E1, E2
, ...)
|
- kmalloc
+ kmalloc_array
(
- (E1) * (E2)
+ E1, E2
, ...)
|
- kmalloc
+ kmalloc_array
(
- E1 * E2
+ E1, E2
, ...)
)
Signed-off-by: Kees Cook <keescook@chromium.org>
|