Commit Graph

231977 Commits

Author SHA1 Message Date
Andy Walls
6830661ead [media] lirc_zilog: Remove useless struct i2c_driver.command function
The ir_command() function is a do-nothing stub; remove it.

Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:46:09 -02:00
Andy Walls
8090232a23 [media] lirc_zilog: Remove unneeded tests for existence of the IR Tx function
The driver is now structured so that it must handle an IR Tx unit
for a Z8 IR chip, or it refuses to handle that Z8 IR chip.  This
allows us to assume that ir->tx != NULL in a few places in the driver,
and also allows us to always report Tx is available to userspace.
Get rid of unneeded tests for ir->tx == NULL and always report that
Tx is available.

Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:46:08 -02:00
Andy Walls
b757730b02 [media] lirc_zilog: Update IR Rx polling kthread start/stop and some printks
The IR Rx polling thread was originally a kernel_thread long ago,
and had only been minimally converted to a kthread.  This patch
finishes that conversion by

- cleaning up all the unneeded completions

- destroying the kthread properly by calling kthread_stop()

- changing lirc_thread() to test kthread_should_stop() just before
	every point where it may sleep

- reorganizing the lirc_thread() function so it uses fewer lines

- modifying the name of the kthread from "lirc_zilog" to
	"zilog-rx-i2c-N", so ps will show which kthread polls
	which Zilog Z8 IR unit.

Also some minor tweaks were made to logging emitted by the
ir_probe() function.

Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:46:07 -02:00
Andy Walls
a68a9b73fb [media] lirc_zilog: Extensive rework of ir_probe()/ir_remove()
This patch is an extensive rework of the ir_probe() and ir_remove() functions.

It removes all the double binding and allocation problems on module load.

It removes almost all the memory leaks on module exit and on device
instantiation failure. Proper destruction of the Rx polling kthread still
needs investigation and more work, but it is no worse than it already was.

This rework also had side effects that include:

- encapsulation of the ir_devices[] array
- serialization of access to the ir_devices[] array
- semantic change of the module parameter "disable_rx" to "tx_only"

If tx_only is true, the module does not claim the i2c_client for the IR Rx
function, and only claims and handles the i2c_client for the IR Tx function.
This is a first step in providing the option of letting ir-kbd-i2c.c handle
IR Rx function, while lirc_zilog handles the IR Tx function.

Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:46:06 -02:00
Andy Walls
e9b351f64f [media] lirc_zilog: Don't make private copies of i2c clients
Don't make private copies of the i2c clients provided by the I2C
subsystem, don't change the client address field, and don't probe
the client addresses - the bridge driver already did that.  This
moves us to the proper I2C and binding model.

Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:46:05 -02:00
Andy Walls
06da95a3ec [media] lirc_zilog: Split struct IR into structs IR, IR_tx, and IR_rx
This change is a mostly mechanical break of the main struct IR
data structure into common, Rx, and Tx structures.  There were some
small logical changes required as well, such as eliminating "is_hdpvr",
to accomplish this.

This change is an intiial step in reworking lirc_zilog to decouple the
Rx and Tx handling as much as possible to fit with the new I2C
binding model.  This change actually makes lirc_zilog a little more
broken than it already was - memory deallocation in particular got worse.
However, this change makes the remaining problems easier to see and address.

Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:46:04 -02:00
Andy Walls
02fcaaa3a5 [media] lirc_zilog: Remove disable_tx module parameter
The only reason to use the lirc_zilog module is for IR Tx, so remove
the possibility of disabling IR Tx.  If the user needs only IR Rx,
then the ir-kbd-i2c module works just fine, and doesn't require a
"firmware" image.

Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:46:03 -02:00
Andy Walls
86e52428ee [media] lirc_zilog: Reword debug message in ir_probe()
Jean Delvare <khali@linux-fr.org> suggested this better
format for debug output in ir_probe().

Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:46:02 -02:00
Stefan Richter
22f37712f2 [media] firedtv: fix remote control with newer Xorg evdev
After a recent update of xf86-input-evdev and xorg-server, I noticed
that X11 applications did not receive keypresses from the FireDTV
infrared remote control anymore.  Instead, the Xorg log featured lots of

    "FireDTV remote control: dropping event due to full queue!"

exclamations.  The Linux console did not have an issue with the
FireDTV's RC though.

The fix is to insert EV_SYN events after the key-down/-up events.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:59 -02:00
Dmitri Belimov
3c61be446a [media] tm6000: rework init code
Rework device init part. Move common code part to a function.
Usefull for register multiple devices like video, radio, vbi etc.

Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:58 -02:00
Geert Uytterhoeven
2400982a2e [media] radio-aimslab.c needs #include <linux/delay.h>
Commit e3c9221519 ("[media] radio-aimslab.c: Fix
gcc 4.5+ bug") removed the include, but introduced new callers of msleep():

| drivers/media/radio/radio-aimslab.c: In function ‘rt_decvol’:
| drivers/media/radio/radio-aimslab.c:76: error: implicit declaration of function ‘msleep’

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:57 -02:00
Randy Dunlap
2dbd61b465 [media] ir-raw: fix sparse non-ANSI function warning
Fix sparse warning for non-ANSI function declaration:

drivers/media/rc/ir-raw.c:247:30: warning: non-ANSI function declaration of function 'ir_raw_get_allowed_protocols'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc:	Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:56 -02:00
Christian Gmeiner
b7eccc46a1 [media] adv7175: support s_power
This patch adds s_power support to adv7175 driver. Power-down is done
by power-down all four DACs.

Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:55 -02:00
Dan Carpenter
cb26a24ee9 [media] [v3,media] av7110: check for negative array offset
info->num comes from the user.  It's type int.  If the user passes
in a negative value that would cause memory corruption.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:54 -02:00
Jarod Wilson
76f1ef427c [media] rc/imon: default to key mode instead of mouse mode
My initial thinking was that we should default to mouse mode, so people
could use the mouse function to click on something on a login screen,
but a lot of systems where a remote is useful automatically log in a
user and launch a media center application, some of which hide the
mouse, which can be confusing to users if they punch buttons on the
remote and don't see any feedback. Plus, first and foremost, its a
remote, so lets default to being a remote, and only toggle into mouse
mode when the user explicitly asks for it. As a nice side-effect, this
actually simplifies some of the code a fair bit...

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:53 -02:00
Jarod Wilson
5aad724280 [media] rc: fix up and genericize some time unit conversions
The ene_ir driver was using a private define of MS_TO_NS, which is meant
to be microseconds to nanoseconds. The mceusb driver copied it,
intending to use is a milliseconds to microseconds. Lets move the
defines to a common location, expand and standardize them a touch, so
that we now have:

  MS_TO_NS - milliseconds to nanoseconds
  MS_TO_US - milliseconds to microseconds
  US_TO_NS - microseconds to nanoseconds

Reported-by: David Härdeman <david@hardeman.nu>
CC: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:52 -02:00
Jarod Wilson
9ad77eb57b [media] rc/imon: need to submit urb before ffdc type check
Otherwise, we have a null receive buffer, and the logic all falls down,
goes boom, all ffdc devs wind up as imon IR w/VFD. Oops.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:51 -02:00
Kyle McMartin
2e4c55626a [media] rc/ene_ir: fix oops on module load
dev->rdev is accessed in ene_setup_hw_settings, so it needs to be wired
up before then.

[Jarod Wilson]: Also fix a possible improper resource freeing bug while
we're looking at possible probe issues here.

Signed-off-by: Kyle McMartin <kmcmartin@redhat.com>
CC: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:50 -02:00
Jarod Wilson
7d2edfc23e [media] rc/imon: fix ffdc device detection oops
There's a nasty bug that slipped in when the rc device interface was
altered, only affecting the older 0xffdc imon devices. We were trying
to access ictx->rdev->allowed_protos before ictx->rdev had been set.

There's also an issue with call ordering that meant the correct
keymap wasn't getting loaded for MCE IR type 0xffdc devices.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:49 -02:00
Thadeu Lima de Souza Cascardo
e95342f168 [media] DVB: cx231xx drivers does not use dummy frontend anymore
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:48 -02:00
Matti Aaltonen
34b8fc8e68 [media] V4L2: WL1273 FM Radio: Replace ioctl with unlocked_ioctl
Use unlocked_ioctl in v4l2_file_operations. The locking is
already in place.

Signed-off-by: Matti J. Aaltonen <matti.j.aaltonen@nokia.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:47 -02:00
Tejun Heo
a3bc5e3304 [media] v4l/cx18: update workqueue usage
With cmwq, there's no reason to use separate out_work_queue.  Drop it
and use system_wq instead.  The in_work_queue needs to be ordered so
can't use one of the system wqs; however, as it isn't used to reclaim
memory, allocate the workqueue with alloc_ordered_workqueue() without
WQ_MEM_RECLAIM.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andy Walls <awalls@md.metrocast.net>
Acked-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:46 -02:00
Jesper Juhl
fd01ad9894 [media] media, tlg2300: Fix memory leak in alloc_bulk_urbs_generic()
Hi,

While reading
drivers/media/video/tlg2300/pd-video.c::alloc_bulk_urbs_generic() I
noticed that

 - We don't free the memory allocated to 'urb' if the call to
   usb_alloc_coherent() fails.
 - If the 'num' argument to the function is ever <= 0 we'll return an
   uninitialized variable 'i' to the caller.

The following patch addresses both of the above by a) calling
usb_free_urb() when usb_alloc_coherent() fails and by explicitly
initializing 'i' to zero.
I also moved the variables 'mem' and 'urb' inside the for loop. This does
not actually make any difference, it just seemed more correct to me to let
variables exist only in the innermost scope they are used.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Acked-by: Huang Shijie <shijie8@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:45 -02:00
Jesper Juhl
36fd97884d [media] frontends/ix2505v: Remember to free allocated memory in failure path
We may leak the storage allocated to 'state' in
drivers/media/dvb/frontends/ix2505v.c::ix2505v_attach() on error, as
it is too early to be able to call ix2505v_release().

This patch makes sure we free the allocated memory in the failure case.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:44 -02:00
Jean-François Moine
a63d601803 [media] gspca - sonixj: Add LED (illuminator) control to the webcam 0c45:614a
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:43 -02:00
Jean-François Moine
3afef85bfe [media] gspca - sonixj: Infrared bug fix and enhancement
The infrared was set by sensor write instead of bridge GPIO.
It is now settable by the standard control ILLUMINATOR_1.
A module parameter permits to set the right GPIO bit according
to the StarCam model.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:42 -02:00
Jean-François Moine
14b67c2969 [media] gspca - ov534: Propagate errors to higher level
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:41 -02:00
Jean-François Moine
ddffa49e25 [media] gspca - ov534: Clearer debug messages
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:39 -02:00
Jean-François Moine
fc63de88e0 [media] gspca - ov519: Cleanup source and add a comment
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:38 -02:00
Jean-François Moine
ded5e903b7 [media] gspca: Remove useless instructions
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:37 -02:00
Jean-François Moine
95c967c167 [media] gspca: Remove __devinit, __devinitconst and __devinitdata
__devinit* must not be used in USB drivers.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:35 -02:00
Jean-François Moine
0beb6714e7 [media] gspca: Version change
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:33 -02:00
Hans Verkuil
2a863793be [media] v4l2-ctrls: v4l2_ctrl_handler_setup must set is_new to 1
Renamed has_new to is_new.

Drivers can use the is_new field to determine if a new value was specified
for a control. The v4l2_ctrl_handler_setup() must always set this to 1 since
the setup has to force a full update of all controls.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:32 -02:00
Hans Verkuil
45f6f84af3 [media] v4l2-subdev: add (un)register internal ops
Some subdevs need to call into the board code after they are registered
and have a valid struct v4l2_device pointer. The s_config op was abused
for this, but now that it is removed we need a cleaner way of solving this.

So this patch adds a struct with internal ops that the v4l2 core can call.

Currently only two ops exist: register and unregister. Subdevs can implement
these to call the board code and pass it the v4l2_device pointer, which the
board code can then use to get access to the struct that embeds the
v4l2_device.

It is expected that in the future open and close ops will also be added.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:31 -02:00
Hans Verkuil
3c7c9370fb [media] v4l2-subdev: remove core.s_config and v4l2_i2c_new_subdev_cfg()
The core.s_config op was meant for legacy drivers that needed to work with old
pre-2.6.26 kernels. This is no longer relevant. Unfortunately, this op was
incorrectly called from several drivers.

Replace those occurences with proper i2c_board_info structs and call
v4l2_i2c_new_subdev_board.

After these changes v4l2_i2c_new_subdev_cfg() was no longer used, so remove
that function as well.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:30 -02:00
Mauro Carvalho Chehab
ecb71d262b [media] saa7134: Kworld SBTVD: make both analog and digital to work
There are some weird bugs at tda8290/tda18271 initialization, as it
insits do do analog initialization during DVB frontend attach:

DVB: registering new adapter (saa7133[0])
DVB: registering adapter 0 frontend 0 (Fujitsu mb86A20s)...
mb86a20s: mb86a20s_initfe
tda18271_write_regs: [2-0060|M] ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5
tda18271_init: [2-0060|M] error -5 on line 830
tda18271_tune: [2-0060|M] error -5 on line 908
tda18271_write_regs
tda18271_write_regs: [2-0060|M] ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5
tda18271c2_rf_tracking_filters_correction: [2-0060|M] error -5 on line 265
tda18271_write_regs
tda18271_write_regs: [2-0060|M] ERROR: idx = 0x25, len = 1, i2c_transfer returned: -5
tda18271_channel_configuration: [2-0060|M] error -5 on line 119
tda18271_set_analog_params: [2-0060|M] error -5 on line 1045
tda18271_set_analog_params: [2-0060|M] error -5 on line 1045
tda829x 2-004b: tda8295 not locked, no signal?
tda829x 2-004b: tda8295_i2c_bridge: disable i2c gate
tda829x 2-004b: tda8295 not locked, no signal?
tda829x 2-004b: tda8295_i2c_bridge: disable i2c gate
mb86a20s_i2c_writereg: writereg error (rc == -5, reg == 0x29, data == 0x33)
mb86a20s: Init failed. Will try again later

The problem is that mb86a20s is only visible if the analog part is disabled.

However, due to a trick at mb86a20s, it will later initialize properly:

mb86a20s: mb86a20s_initfe: Initialization succeded.

This is hacky and ugly. However, I coldn't find any easy way to fix it.
A proper fix would be to have a resource locking schema, used by both
V4L and DVB parts that would block access to analog registers while
digital registers are in use, but this will probably put tda829x into
a dead lock.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:28 -02:00
Mauro Carvalho Chehab
6a58bc0f50 [media] saa7134: Fix digital mode on Kworld SBTVD
This patch fixes digital mode on Kworld SBTVD. Unfortunately, it disables
analog mode.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:27 -02:00
Mauro Carvalho Chehab
6183040680 [media] saa7134: Fix analog mode for Kworld SBTVD
There were some issues at tda8290 that were preventing this device
to work. Now that those fixes were fixed, we can enable analog
mode.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:26 -02:00
Mauro Carvalho Chehab
c736a5f28e [media] mb86a20s: Be sure that device is initialized before starting DVB
Due to a hard to track bug between tda829x/tda18271/saa7134, tda829x
wants to go to analog mode during DVB initialization, causing some
I2C errors.

The analog failure doesn't cause any harm, as the device were already
properly initialized in analog mode. However, the failure at the digital
mode causes the frontend mb86a20s to not initialize. Fortunately, at
least on my tests, it was possible to detect that the device is a
mb86a20s before the failure.

What happens is that tda8290 is a very bad boy: during DVB setup, it
keeps insisting to call tda18271 analog_set_params, that calls
tune_agc code. The tune_agc code calls saa7134 driver, changing the
value of GPIO 27, switching from digital to analog mode and disabling
the access to mb86a20s, as, on Kworld SBTVD, the same GPIO used
to switch the hardware AGC mode seems to be used to enable the I2C
switch that allows access to the frontend (mb86a20s).

So, a call to analog_set_params ultimately disables the access to
the frontend, and causes a failure at the init frontend logic.

This patch is a workaround for this issue: it simply checks if the
frontend init had any failure. If so, it will init the frontend when
some DTV application will try to set DVB mode.

Even being a hack for Kworld SBTVD to work, and assumning that we could
teach tda8290 to be a good boy, this is actually an improvement at the
frontend driver, as it will be more reliable to initialization failures.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:25 -02:00
Mauro Carvalho Chehab
7570800c9d [media] mb86a20s: Fix i2c read/write error messages
A script replaced err var to rc. Howerver, this script gambled
"error" string, changing it to "rcor". Revert that bad change.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:24 -02:00
Mauro Carvalho Chehab
9d700a0696 [media] tda8290: Turn tda829x on before touching at the I2C gate
On Kworld SBTVD, tda8295-c1 starts in power off mode. It needs
to be powered, otherwise, the I2C gate control command won't work.

Cc: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:23 -02:00
Mauro Carvalho Chehab
47ab285a96 [media] tda8290: Fix a bug if no tuner is detected
If tda8290 is detected, but no tuner is found, the driver will do bad
things:

tuner 2-0060: chip found @ 0xc0 (saa7133[0])
tda829x 2-0060: could not clearly identify tuner address, defaulting to 60
tda829x 2-0060: tuner access failed!
BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
IP: [<ffffffffa048c267>] set_audio+0x47/0x170 [tda8290]
PGD 1187b0067 PUD 11771e067 PMD 0
Oops: 0002 [#1] SMP
last sysfs file: /sys/module/i2c_core/initstate
CPU 0
Modules linked in: tda8290(U) tea5767(U) tuner(U) ir_lirc_codec(U) lirc_dev(U) ir_sony_decoder(U) ir_jvc_decoder(U) ir_rc6_decoder(U) ir_rc5_decoder(U) saa7134(+)(U) v4l2_common(U) ir_nec_decoder(U) videodev(U) v4l2_compat_ioctl32(U) rc_core(U) videobuf_dma_sg(U) videobuf_core(U) tveeprom(U) ebtable_nat ebtables xt_CHECKSUM iptable_mangle ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT bridge stp llc autofs4 sunrpc cpufreq_ondemand acpi_cpufreq freq_table xt_physdev iptable_filter ip_tables ip6t_REJECT ip6table_filter ip6_tables ipv6 dm_mirror dm_region_hash dm_log parport kvm_intel kvm uinput floppy tpm_infineon wmi sg serio_raw iTCO_wdt iTCO_vendor_support tg3 snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_seq snd_seq_device snd_pcm snd_timer snd soundcore snd_page_alloc i7core_edac edac_core nouveau
Modules linked in: tda8290(U) tea5767(U) tuner(U) ir_lirc_codec(U) lirc_dev(U) ir_sony_decoder(U) ir_jvc_decoder(U) ir_rc6_decoder(U) ir_rc5_decoder(U) saa7134(+)(U) v4l2_common(U) ir_nec_decoder(U) videodev(U) v4l2_compat_ioctl32(U) rc_core(U) videobuf_dma_sg(U) videobuf_core(U) tveeprom(U) ebtable_nat ebtables xt_CHECKSUM iptable_mangle ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT bridge stp llc autofs4 sunrpc cpufreq_ondemand acpi_cpufreq freq_table xt_physdev iptable_filter ip_tables ip6t_REJECT ip6table_filter ip6_tables ipv6 dm_mirror dm_region_hash dm_log parport kvm_intel kvm uinput floppy tpm_infineon wmi sg serio_raw iTCO_wdt iTCO_vendor_support tg3 snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_seq snd_seq_device snd_pcm snd_timer snd soundcore snd_page_alloc i7core_edac edac_core nouveau ttm drm_kms_helper drm i2c_algo_bit video output i2c_core ext3 jbd mbcache firewire_ohci firewire_core crc_itu_t sr_mod cdrom sd_mod crc_t10dif ahci dm_mod [last unloaded: microcode]
Pid: 9497, comm: modprobe Not tainted 2.6.32-72.el6.x86_64 #1 HP Z400 Workstation
RIP: 0010:[<ffffffffa048c267>]  [<ffffffffa048c267>] set_audio+0x47/0x170 [tda8290]
RSP: 0018:ffff88010ba01b28  EFLAGS: 00010206
RAX: 00000000000000ff RBX: ffff880119522800 RCX: 0000000000000002
RDX: 0000000000003be0 RSI: ffff88010ba01bb8 RDI: 0000000000000000
RBP: ffff88010ba01b28 R08: 0000000000000002 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: ffff88010ba01bb8 R14: 0000000000001900 R15: 0000000000001900
FS:  00007f4b96b3d700(0000) GS:ffff880028200000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000020 CR3: 000000011866c000 CR4: 00000000000026f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process modprobe (pid: 9497, threadinfo ffff88010ba00000, task ffff880100708a70)
Stack:
 ffff88010ba01b98 ffffffffa048c95b ffff88010ba01b78 0000000000000060
<0> 0000000000000000 0000000e00000000 000000000000001d ffffffffa03ec838
<0> ffff88010abac240 ffff880119522800 ffff880119522800 ffff880119522bc0
Call Trace:
 [<ffffffffa048c95b>] tda8295_set_params+0x3b/0x210 [tda8290]
 [<ffffffffa03ec838>] ? v4l2_i2c_new_subdev_cfg+0x88/0xc0 [v4l2_common]
 [<ffffffffa0484418>] set_freq+0x128/0x2f0 [tuner]
 [<ffffffffa0486464>] tuner_s_std+0xc4/0x740 [tuner]
 [<ffffffffa04b9ae6>] saa7134_set_tvnorm_hw+0x2d6/0x3d0 [saa7134]
 [<ffffffffa04ba455>] set_tvnorm+0xd5/0x100 [saa7134]
 [<ffffffffa04bc9fd>] saa7134_video_init2+0x1d/0x50 [saa7134]
 [<ffffffffa04bf57e>] saa7134_initdev+0x6e1/0xb1d [saa7134]
 [<ffffffff8125afea>] ? kobject_get+0x1a/0x30
 [<ffffffff812765f7>] local_pci_probe+0x17/0x20
 [<ffffffff812777e1>] pci_device_probe+0x101/0x120
 [<ffffffff8132ec72>] ? driver_sysfs_add+0x62/0x90
 [<ffffffff8132ee10>] driver_probe_device+0xa0/0x2a0
 [<ffffffff8132f0bb>] __driver_attach+0xab/0xb0
 [<ffffffff8132f010>] ? __driver_attach+0x0/0xb0
 [<ffffffff8132e074>] bus_for_each_dev+0x64/0x90
 [<ffffffff8132ebae>] driver_attach+0x1e/0x20
 [<ffffffff8132e4b0>] bus_add_driver+0x200/0x300
 [<ffffffff8132f3e6>] driver_register+0x76/0x140
 [<ffffffff814c7c43>] ? printk+0x41/0x46
 [<ffffffff81277a46>] __pci_register_driver+0x56/0xd0
 [<ffffffffa04de000>] ? saa7134_init+0x0/0x4f [saa7134]
 [<ffffffffa04de04d>] saa7134_init+0x4d/0x4f [saa7134]
 [<ffffffff8100a04c>] do_one_initcall+0x3c/0x1d0
 [<ffffffff810af5ef>] sys_init_module+0xdf/0x250
 [<ffffffff81013172>] system_call_fastpath+0x16/0x1b
Code: 20 01 49 c7 c0 c9 ec 48 a0 83 7e 04 01 74 2d 8b 0d 3f 2f 00 00 85 c9 0f 85 d7 00 00 00 c9 c3 0f 1f 44 00 00 a9 03 00 01 00 74 61 <c6> 47 20 02 83 7e 04 01 49 c7 c0 cc ec 48 a0 75 d3 0f b6 47 22
RIP  [<ffffffffa048c267>] set_audio+0x47/0x170 [tda8290]
 RSP <ffff88010ba01b28>
CR2: 0000000000000020

This happens because some I2C callbacks actually depend on having the
driver entirely initialized. To avoid this OOPS, just clean the I2C
callbacks, as if no device were detected.

Cc: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:22 -02:00
Mauro Carvalho Chehab
567aba0b79 [media] tda8290: Make all read operations atomic
Read operations should be preceeded by a write operation. However,
nothing prevents that an I2C operation could happen between the two
transactions.

To avoid that problem, use an unique I2C transfer for both parts of
the I2C transaction.

Cc: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:20 -02:00
Mauro Carvalho Chehab
5a85025f7d [media] em28xx: Fix IR support for WinTV USB2
Due to a lack of a break inside the switch, it were getting the
wrong keytable and get_key function.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:19 -02:00
Mauro Carvalho Chehab
e6bcb2f324 [media] ir-kbd-i2c: Make IR debug messages more useful
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:18 -02:00
Mauro Carvalho Chehab
59aa346009 [media] dib0700: Fix IR keycode handling
Fixes Fedora 14 bug: https://bugzilla.redhat.com/show_bug.cgi?id=667157

There are a few bugs at the code that generates the scancode at dib0700:
	- RC keycode is wrong (it outputs a 24 bits keycode);
	- NEC extended outputs a keycode that have endiannes issues;
	- keycode tables for NEC extended remotes need to be updated.

The last issue need to be done as we get reports, as we don't have
the complete NEC-extended keycodes at the dibcom table.

This patch fixes the first two issues.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:17 -02:00
Mauro Carvalho Chehab
312d63e4b0 [media] rc-dib0700-nec: Fix keytable for Pixelview SBTVD
dib0700 now outputs NEC extended keycodes. Fix the keytable to reflect that.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:16 -02:00
Tobias Lorenz
186a21cb77 [media] radio-si470x: Always report support for RDS
The si470x i2c and usb driver support the RDS, so this ifdef statement
doesn't need more.

[mchehab@redhat.com: Fix a conflict on it]
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Acked-by: Tobias Lorenz <tobias.lorenz@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:15 -02:00
Tobias Lorenz
131ddd1a30 [media] radio-si470x: de-emphasis should be set if requested by module parameter
instead of always setting de-emphasis.

Reported-by: Tobias Lorenz <tobias.lorenz@gmx.net>
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Acked-by: Tobias Lorenz <tobias.lorenz@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:14 -02:00
Hans Verkuil
a1198ccf9c [media] v4l2-ioctl: fix incorrect error code if VIDIOC_DBG_G/S_REGISTER are unsupported
The ioctls VIDIOC_DBG_S_REGISTER and VIDIOC_DBG_G_REGISTER should return -EINVAL
if the driver didn't implement them. Currently they return -EPERM if called as
non-root user. However, this check should only be done if the driver actually
implemented these ioctls. Otherwise, just return -EINVAL as we do with all
unimplemented ioctls.

This bug make the v4l2-compliance test suite fail.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:13 -02:00