Commit Graph

52 Commits

Author SHA1 Message Date
Ben Dooks
cbe69f95fa [ARM] 3138/1: SMDK2440 - fix map_desc initialisation (and ISA memory space)
Patch from Ben Dooks

Fix the map_desc initialisers for the SMDK2440 machine
to use the new .pfn method, and at the same time making
the differntiation between ISA IO and Memory space
accesses

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-09 14:05:31 +00:00
Ben Dooks
ff6ffa82fe [ARM] 3137/1: RX3715 - fix map_desc initialiser
Patch from Ben Dooks

Change the initialiser for the map_desc for the
iPAQ RX3715 to use the new pfn initialiser, and
also reduce the amount of ISA space mapped (we
only need to stop any ISA IO writes OOPsing
the system, so do not need >1Mbyte of space)

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-09 14:05:31 +00:00
Ben Dooks
8dd523118b [ARM] 3136/1: Anubis - fix map_desc initialisers
Patch from Ben Dooks

Fix the map_desc initialisers for the Simtec Anubis
board to match the new initialiser scheme.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-09 14:05:30 +00:00
Ben Dooks
f8c905d368 [ARM] 3132/1: S3C2410 - reset on decompression error
Patch from Ben Dooks

Force a watchdog reset if the system fails to
decompress properly.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-08 22:43:05 +00:00
Ben Dooks
1d23b65de5 [ARM] 3126/1: BAST: fix map_desc initialisation
Patch from Ben Dooks

Fix the map_desc entries to use the new .pfn
initialiser for the Simtec BAST machine support.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-08 19:15:31 +00:00
Ben Dooks
df1ec6deeb [ARM] 3125/2: VR1000: Fix map_decs initialiser
Patch from Ben Dooks

Fix the initialisation of the map_desc fields
in the Thorcom VR1000 machine support to use
the new .pfn initialiser.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-08 19:15:30 +00:00
Linus Torvalds
7f36b1e958 Merge master.kernel.org:/home/rmk/linux-2.6-arm 2005-11-01 21:32:14 -08:00
Ben Dooks
e838ffc2e5 [ARM] 3071/1: RX3715 - add lcd/fb platform setup
Patch from Ben Dooks

Platform data for the LCD/framebuffer driver for
the RX3715 LCD panel.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-01 19:44:28 +00:00
Russell King
d052d1beff Create platform_device.h to contain all the platform device details.
Convert everyone who uses platform_bus_type to include
linux/platform_device.h.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-29 19:07:23 +01:00
Ben Dooks
5771897614 [ARM] 3047/1: SMDK2440 - add framebuffer platform data
Patch from Ben Dooks

Add platform data for framebuffer for the
onboard LCD module

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-28 15:31:47 +01:00
Ben Dooks
58c8d570f3 [ARM] 3046/1: BAST - add framebuffer platform data
Patch from Ben Dooks

Add framebuffer platform data

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-28 15:31:46 +01:00
Ben Dooks
893b03094c [ARM] 3045/2: S3C2410 - change init for lcd platform data
Patch from Ben Dooks

Change set_s3c2410fb_info to s3c2410_fb_set_platdata
and use kmalloc() for the copy of the information it
is passed.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-28 15:31:45 +01:00
Ben Dooks
a0e0adb96e [ARM] 3034/1: S3C2410 - fix size of devices in devs.c
Patch from Ben Dooks

From: Guillaume GOURAT <guillaume.gourat@nexvision.fr>

A number of devices have an extra byte on the
end of their areas due to mis-calculating the
.end field of their resources

Signed-off-by: Guillaume GOURAT <guillaume.gourat@nexvision.fr>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-28 15:26:42 +01:00
Ben Dooks
42d3a120fe [ARM] 3033/1: S3C2410 - add generic gpio_cfgpin options
Patch from Ben Dooks

Add generic values for the parameters to the
s3c2410_gpio_cfgpin() function, so that a caller
does not need to know the exact constant for
the specified pin.

This is very useful for the case where a driver
is passed a gpio pin number and needs to reconfigure
the pin's function.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-28 15:26:41 +01:00
Deepak Saxena
1cc977a766 [ARM] 2990/1: Replace map_desc.physical with map_desc.pfn: S3C2410
Patch from Deepak Saxena

S3C2410 map_desc.pfn conversion

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-28 15:19:02 +01:00
Ben Dooks
b048dbf4d4 [ARM] 3027/1: BAST - reduce NAND timings slightly
Patch from Ben Dooks

The current Simtec BAST nand area timings are a little
too slow to be obtained by a 2410 running at 266MHz,
so reduce the timings slightly to bring them into the
acceptable range.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-20 23:21:19 +01:00
Ben Dooks
c086f282c0 [ARM] 3018/1: S3C2410 - check de-referenced device is really a platform device
Patch from Ben Dooks

Check that the device we are looking at is really
a platform device before trying to cast it to one
to find out the platform bus number.

Thanks to RMK for pointing this out.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-18 07:51:34 +01:00
Ben Dooks
50688ea9ed [ARM] 3007/1: BAST - add CONFIG_ISA to build
Patch from Ben Dooks

The Simtec EB2410ITX (BAST) has a PC/104 slot, and
therefore we should enable CONFIG_ISA to allow the
drivers for ISA peripherals to be selected

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-13 22:04:36 +01:00
Ben Dooks
3a8f675c40 [ARM] 3006/1: S3C2410 - arch/arm/mach-s3c2410 sparse fixes
Patch from Ben Dooks

Remove an unused variable from s3c2410.c and
ensure that items not needed to be exported from
s3c2440.c are declared static.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-13 16:46:35 +01:00
Ben Dooks
9f693d7b14 [ARM] 2979/2: S3C2410 - add static to non-exported machine items
Patch from Ben Dooks

Do not export items that are not needed by symbol name
elsewhere

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-12 19:58:07 +01:00
Ben Dooks
0eea3c0b6c [ARM] 2975/1: S3C2410: time.c missing include of cpu.h
Patch from Ben Dooks

arch/arm/mach-s3c2410/time.c is missing include
of cpu.h, causing the declaration of the timer
struct (s3c24xx_timer) to be flagged as missing
the declaration.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-12 19:58:05 +01:00
Russell King
fc611a1a50 [ARM] Don't include mach-types.h unnecessarily
It's pointless to include mach-types.h if you're not going to use
anything from it.  These references were removed as a result of:

grep -lr 'asm/mach-types\.h' . | xargs grep -L 'machine_is_\|MACH_TYPE_\|MACHINE_START\|machine_type'

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-29 11:15:51 +01:00
Ben Dooks
5fe10ab190 [ARM] 2928/1: S3C2410 - make machine init code static
Patch from Ben Dooks

This code is not being exported, declare it static

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-20 17:24:33 +01:00
Arnaud Patard
f92273c165 [PATCH] s3c2410fb: Platform support for ARM S3C2410 framebuffer driver
This patch add the plateform specific stuff needed to configure and use the
driver.

Signed-Off-By: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ben Dooks <ben@trinity.fluff.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 14:03:42 -07:00
Russell King
6df29debb7 [SERIAL] Use an enum for serial8250 platform device IDs
Rather than hard-coding the platform device IDs, enumerate them.
We don't particularly care about the actual ID we get, just as
long as they're unique.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-08 16:04:41 +01:00
Ben Dooks
bafa49cc1b [ARM] 2884/1: BAST - fix PC104 IRQ routing
Patch from Ben Dooks

This has been broken for a while now, so fix the
problems with the code, test and bring up to date.
This also makes the code conditional on an
Kconfig option

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-07 17:24:48 +01:00
Ben Dooks
7efb833d64 [ARM] 2889/1: S3C2410 - Add machine Anubis
Patch from Ben Dooks

Add the Simtec Anubis to the list of supported
machines in the arch/arm/mach-s3c2410 directory.
This ensures the core peripherals are registered,
the timer source is configured and the correct
power-management is enabled.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-07 11:49:23 +01:00
Ben Dooks
027da01d73 [ARM] 2876/1: N30 - remove task to toggle USB D+ line
Patch from Ben Dooks

The n30 machine file is using a kernel thread to change the
state of the USB D+ pull-up resistor, which is not the proper
way to do this. Once the usb-gadget support for the 24xx is
merge, the proper access method will be added.
This patch also removes the problem of using HZ for the
msleep calls, from Nishanth Aravamudan.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-05 20:47:53 +01:00
Russell King
664399e1fb [ARM] Wrap calls to descriptor handlers
This is part of Thomas Gleixner's generic IRQ patch, which converts
ARM to use the generic IRQ subsystem.  Here, we wrap calls to
desc->handler() in an inline function, desc_handle_irq().  This
reduces the size of Thomas' patch since the changes become more
localised.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-04 19:45:00 +01:00
Russell King
7801907b8c [ARM] Change irq_chip wake/type methods to set_wake/set_type
This is part of Thomas Gleixner's generic IRQ patch, which converts
ARM to use the generic IRQ subsystem.  Here, we rename two of the
irq_chip methods - wake becomes set_wake, and type becomes set_type.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-04 19:43:13 +01:00
Ben Dooks
9bed07d0fe [ARM] 2874/1: S3C2410 - add cpu_init() call after sleep wakeup
Patch from Ben Dooks

The power management sleep code needs to call cpu_init()
to restore the cpu state after the system resumes from
suspend. Also clear off an un-necessary comment.
Thanks to Dimitry Andric for reporting the bug and
for rmk for pointing out the cause.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-03 19:39:26 +01:00
Ben Dooks
01b9c41482 [ARM] 2856/1: S3C2440 - show DVS status at startup
Patch from Ben Dooks

Show the state of DVS (Dynamic Voltage Scaling) when
starting up on the S3C2440

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-08-29 22:46:31 +01:00
Ben Dooks
d6b0bf213b [ARM] 2855/1: S3C2410 - add CLKSLOW definitions, and show in init
Patch from Ben Dooks

Add the definitions for the S3C2410_CLKSLOW registers to
the header files, and show the values when the system
starts up

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-08-29 22:46:30 +01:00
Dimitry Andric
62ee914ef2 [ARM] 2850/1: Remove duplicate UART I/O mapping from s3c2410_iodesc
Patch from Dimitry Andric

This patch removes the initial UART I/O mapping from s3c2410_iodesc,
since the same mapping is already done in the function s3c24xx_init_io
in the file arch/arm/mach-s3c2410/cpu.c, through the s3c_iodesc array.
I'm not sure if duplicate mappings do any harm, but it's simply
redundant.  Also, in s3c2440.c the UART I/O mapping is NOT done.
Additionally, I put a comma behind the last mapping, to ease
copy/pasting stuff around, and make the style consistent with
s3c2440.c and other files.

Signed-off-by: Dimitry Andric <dimitry@andric.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-08-17 13:01:19 +01:00
Ben Dooks
484ae6bd95 [PATCH] ARM: 2849/1: S3C24XX - USB host update (2848/1)
Patch from Ben Dooks

Rename the s3c2410_report_oc() to s3c2410_usb_report_oc()
as this is an usb specific function.
Change port power on the usb-simtec implementation to only
power up the output if both are set, as per the usb 1.1
specification

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-08-10 16:45:14 +01:00
Ben Dooks
1fcf844861 [PATCH] ARM: 2832/1: BAST - limit clock-rate for IIC bus
Patch from Ben Dooks

The default clock rate does not specify a maximum, so the
default of 400KHz is used. This rate is too fast for the PMU
on the EB2410ITX, so we now specify platform data with a rate
of around 100KHz.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-08-03 19:49:16 +01:00
Ben Dooks
a8d11e3d02 [PATCH] ARM: 2831/1: S3C2440 - split s3c2440 clocks from central clock code
Patch from Ben Dooks

Split the s3c2440 specific clocks from the arch clock support, to
make the code clearer.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-26 22:39:14 +01:00
Ben Dooks
7fcc113c30 [PATCH] ARM: 2829/1: S3C2410 - split s3c2440 irq specifics from core irq.c
Patch from Ben Dooks

Remove the need for the #ifdefs and place the IRQ handling code for
the s3c2440 into a new file, which is only compiled when the
s3c2440 cpu support is enabled.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-26 19:20:27 +01:00
Ben Dooks
5730b7d652 [PATCH] ARM: 2828/1: BAST - remove static map of ASIX area
Patch from Ben Dooks

There is no point in mapping this staticaly, the driver is going
to ioremap() the area as it sees fit. Also correct the dates on
the changelog comments

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-26 19:20:26 +01:00
Linus Torvalds
2c2a68b847 Merge master.kernel.org:/home/rmk/linux-2.6-serial 2005-07-23 17:01:26 -07:00
Lucas Correia Villa Real
53776eb4ac [PATCH] ARM: 2825/1: S3C2410: turns %d into %ld on DMA printk
Patch from Lucas Correia Villa Real

This patch replaces the sizeof()'s %d specifier by %ld on a S3C2410 DMA
printk.

Signed-off-by: Lucas Correia Villa Real <lucasvr@gobolinux.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-24 00:15:46 +01:00
Ben Dooks
65cc3370ef [PATCH] ARM: 2818/1: BAST - Use platform device for SuperIO 16550s
Patch from Ben Dooks

Use platform device for the 16500 UARTs in the onboard
SuperIO controller.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-18 10:24:32 +01:00
Russell King
e9dea0c65d [PATCH] ARM: Remove machine description macros
Remove the pointless machine description macros, favouring C99
initialisers instead.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-03 17:38:58 +01:00
Ben Dooks
6904b2465c [PATCH] ARM: 2765/1: S3C24XX - small cleanups in arch/arm/mach-s3c2410
Patch from Ben Dooks

Re-tab the devs.c file, and change the initialiser for the
mach-vr1000.c to use `.xxx = yyy` form.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-29 11:09:15 +01:00
Ben Dooks
f705b1aed7 [PATCH] ARM: 2764/1: S3C24XX - Common PM functions for Simtec boards
Patch from Ben Dooks

All current S3C24XX implementations from Simtec share the same
requirements for suspend/resume information.
This patch moves the save code out of the mach-bast.c file,
and into it's own so it can be shared by all the current
Simtec S3C24XX implementations.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-29 11:09:15 +01:00
Ben Dooks
5027397897 [PATCH] ARM: 2763/1: S3C24XX - mark IRQ_LCD as valid
Patch from Ben Dooks

Fix the IRQ_LCD so that it is marked as valid
since we no longer de-mux this in the main IRQ
handler.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-28 22:42:06 +01:00
Russell King
09b8b5f843 [PATCH] ARM: Add SA_TIMER flag to timer interrupts
VST needs to know which timer handler is for the timer interrupt.
Mark all timer interrupts with the SA_TIMER flag.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-26 17:06:36 +01:00
Ben Dooks
d97a666f36 [PATCH] ARM: 2729/1: DM9000 platform support for S3C2410 machines (BAST, VR1000)
Patch from Ben Dooks

Add platform_device information for DM9000 chip(s) on the
Simtec BAST and the VR1000 board.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-23 21:56:47 +01:00
Albrecht Dreß
105bb2698b [PATCH] ARM: 2694/1: [s3c2410/dma] release irq properly to fix kernel oops
Patch from Albrecht Dreß

Problem:
When a module requests a DMA channel via the function s3c2410_dma_request(), this function requests the appropriate irq under the name of the client module. When the client module is unloaded, it calls s3c2410_dma_free() which does not free the irq. Consequently, when e.g. running "cat /proc/interrupts", the irq owner points to freed memory, leading to a kernel oops.
File:
linux/arch/arm/mach-s3c2410/dma.c
Fix:
trivial, below

Signed-off-by: Albrecht Dreß
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-03 20:52:26 +01:00
Ben Dooks
bfd4e0709f [PATCH] ARM: 2678/1: S3C2440 - cpu fixes, hdiv divisors and nand dev name
Patch from Ben Dooks

Fix the setting of hdiv when set to divide-by-2. Thanks to
Jeonghoon Yoon for pointing this out.
Change name of the NAND device to "s3c2440-nand" as it
is not similar enough to the "s3c2410-nand" device.

Signed-off-by: Ben Dooks
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-05-12 19:27:14 +01:00