Commit Graph

268 Commits

Author SHA1 Message Date
Al Viro
9e1f1de02c more conservative S_NOSEC handling
Caching "we have already removed suid/caps" was overenthusiastic as merged.
On network filesystems we might have had suid/caps set on another client,
silently picked by this client on revalidate, all of that *without* clearing
the S_NOSEC flag.

AFAICS, the only reasonably sane way to deal with that is
	* new superblock flag; unless set, S_NOSEC is not going to be set.
	* local block filesystems set it in their ->mount() (more accurately,
mount_bdev() does, so does btrfs ->mount(), users of mount_bdev() other than
local block ones clear it)
	* if any network filesystem (or a cluster one) wants to use S_NOSEC,
it'll need to set MS_NOSEC in sb->s_flags *AND* take care to clear S_NOSEC when
inode attribute changes are picked from other clients.

It's not an earth-shattering hole (anybody that can set suid on another client
will almost certainly be able to write to the file before doing that anyway),
but it's a bug that needs fixing.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-06-03 18:24:58 -04:00
Andi Kleen
69b4573296 Cache xattr security drop check for write v2
Some recent benchmarking on btrfs showed that a major scaling bottleneck
on large systems on btrfs is currently the xattr lookup on every write.

Why xattr lookup on every write I hear you ask?

write wants to drop suid and security related xattrs that could set o
capabilities for executables.  To do that it currently looks up
security.capability on EVERY write (even for non executables) to decide
whether to drop it or not.

In btrfs this causes an additional tree walk, hitting some per file system
locks and quite bad scalability. In a simple read workload on a 8S
system I saw over 90% CPU time in spinlocks related to that.

Chris Mason tells me this is also a problem in ext4, where it hits
the global mbcache lock.

This patch adds a simple per inode to avoid this problem.  We only
do the lookup once per file and then if there is no xattr cache
the decision. All xattr changes clear the flag.

I also used the same flag to avoid the suid check, although
that one is pretty cheap.

A file system can also set this flag when it creates the inode,
if it has a cheap way to do so.  This is done for some common file systems
in followon patches.

With this patch a major part of the lock contention disappears
for btrfs. Some testing on smaller systems didn't show significant
performance changes, but at least it helps the larger systems
and is generally more efficient.

v2: Rename is_sgid. add file system helper.
Cc: chris.mason@oracle.com
Cc: josef@redhat.com
Cc: viro@zeniv.linux.org.uk
Cc: agruen@linbit.com
Cc: Serge E. Hallyn <serue@us.ibm.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-05-28 12:02:09 -04:00
Darrick J. Wong
3d08bcc887 mm: Wait for writeback when grabbing pages to begin a write
When grabbing a page for a buffered IO write, the mm should wait for writeback
on the page to complete so that the page does not become writable during the IO
operation.  This change is needed to provide page stability during writes for
all filesystems.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-05-28 01:03:21 -04:00
Ying Han
456f998ec8 memcg: add the pagefault count into memcg stats
Two new stats in per-memcg memory.stat which tracks the number of page
faults and number of major page faults.

  "pgfault"
  "pgmajfault"

They are different from "pgpgin"/"pgpgout" stat which count number of
pages charged/discharged to the cgroup and have no meaning of reading/
writing page to disk.

It is valuable to track the two stats for both measuring application's
performance as well as the efficiency of the kernel page reclaim path.
Counting pagefaults per process is useful, but we also need the aggregated
value since processes are monitored and controlled in cgroup basis in
memcg.

Functional test: check the total number of pgfault/pgmajfault of all
memcgs and compare with global vmstat value:

  $ cat /proc/vmstat | grep fault
  pgfault 1070751
  pgmajfault 553

  $ cat /dev/cgroup/memory.stat | grep fault
  pgfault 1071138
  pgmajfault 553
  total_pgfault 1071142
  total_pgmajfault 553

  $ cat /dev/cgroup/A/memory.stat | grep fault
  pgfault 199
  pgmajfault 0
  total_pgfault 199
  total_pgmajfault 0

Performance test: run page fault test(pft) wit 16 thread on faulting in
15G anon pages in 16G container.  There is no regression noticed on the
"flt/cpu/s"

Sample output from pft:

  TAG pft:anon-sys-default:
    Gb  Thr CLine   User     System     Wall    flt/cpu/s fault/wsec
    15   16   1     0.67s   233.41s    14.76s   16798.546 266356.260

  +-------------------------------------------------------------------------+
      N           Min           Max        Median           Avg        Stddev
  x  10     16682.962     17344.027     16913.524     16928.812      166.5362
  +  10     16695.568     16923.896     16820.604     16824.652     84.816568
  No difference proven at 95.0% confidence

[akpm@linux-foundation.org: fix build]
[hughd@google.com: shmem fix]
Signed-off-by: Ying Han <yinghan@google.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-26 17:12:36 -07:00
Linus Torvalds
f8d613e2a6 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/djm/tmem
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/djm/tmem:
  xen: cleancache shim to Xen Transcendent Memory
  ocfs2: add cleancache support
  ext4: add cleancache support
  btrfs: add cleancache support
  ext3: add cleancache support
  mm/fs: add hooks to support cleancache
  mm: cleancache core ops functions and config
  fs: add field to superblock to support cleancache
  mm/fs: cleancache documentation

Fix up trivial conflict in fs/btrfs/extent_io.c due to includes
2011-05-26 10:50:56 -07:00
Dan Magenheimer
c515e1fd36 mm/fs: add hooks to support cleancache
This fourth patch of eight in this cleancache series provides the
core hooks in VFS for: initializing cleancache per filesystem;
capturing clean pages reclaimed by page cache; attempting to get
pages from cleancache before filesystem read; and ensuring coherency
between pagecache, disk, and cleancache.  Note that the placement
of these hooks was stable from 2.6.18 to 2.6.38; a minor semantic
change was required due to a patchset in 2.6.39.

All hooks become no-ops if CONFIG_CLEANCACHE is unset, or become
a check of a boolean global if CONFIG_CLEANCACHE is set but no
cleancache "backend" has claimed cleancache_ops.

Details and a FAQ can be found in Documentation/vm/cleancache.txt

[v8: minchan.kim@gmail.com: adapt to new remove_from_page_cache function]
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Reviewed-by: Jeremy Fitzhardinge <jeremy@goop.org>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Rik Van Riel <riel@redhat.com>
Cc: Jan Beulich <JBeulich@novell.com>
Cc: Andreas Dilger <adilger@sun.com>
Cc: Ted Ts'o <tytso@mit.edu>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <joel.becker@oracle.com>
Cc: Nitin Gupta <ngupta@vflare.org>
2011-05-26 10:01:43 -06:00
Wu Fengguang
2cbea1d3ab readahead: trigger mmap sequential readahead on PG_readahead
Previously the mmap sequential readahead is triggered by updating
ra->prev_pos on each page fault and compare it with current page offset.

It costs dirtying the cache line on each _minor_ page fault.  So remove
the ra->prev_pos recording, and instead tag PG_readahead to trigger the
possible sequential readahead.  It's not only more simple, but also will
work more reliably and reduce cache line bouncing on concurrent page
faults on shared struct file.

In the mosbench exim benchmark which does multi-threaded page faults on
shared struct file, the ra->mmap_miss and ra->prev_pos updates are found
to cause excessive cache line bouncing on tmpfs, which actually disabled
readahead totally (shmem_backing_dev_info.ra_pages == 0).

So remove the ra->prev_pos recording, and instead tag PG_readahead to
trigger the possible sequential readahead.  It's not only more simple, but
also will work more reliably on concurrent reads on shared struct file.

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Tested-by: Tim Chen <tim.c.chen@intel.com>
Reported-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 08:39:27 -07:00
Andi Kleen
207d04baa3 readahead: reduce unnecessary mmap_miss increases
The original INT_MAX is too large, reduce it to

- avoid unnecessarily dirtying/bouncing the cache line

- restore mmap read-around faster on changed access pattern

Background: in the mosbench exim benchmark which does multi-threaded page
faults on shared struct file, the ra->mmap_miss updates are found to cause
excessive cache line bouncing on tmpfs.  The ra state updates are needless
for tmpfs because it actually disabled readahead totally
(shmem_backing_dev_info.ra_pages == 0).

Tested-by: Tim Chen <tim.c.chen@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 08:39:26 -07:00
Wu Fengguang
275b12bf54 readahead: return early when readahead is disabled
Reduce readahead overheads by returning early in do_sync_mmap_readahead().

tmpfs has ra_pages=0 and it can page fault really fast (not constraint by
IO if not swapping).

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Tested-by: Tim Chen <tim.c.chen@intel.com>
Reported-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 08:39:26 -07:00
Peter Zijlstra
3d48ae45e7 mm: Convert i_mmap_lock to a mutex
Straightforward conversion of i_mmap_lock to a mutex.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Miller <davem@davemloft.net>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Tony Luck <tony.luck@intel.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 08:39:18 -07:00
KOSAKI Motohiro
37b23e0525 x86,mm: make pagefault killable
When an oom killing occurs, almost all processes are getting stuck at the
following two points.

	1) __alloc_pages_nodemask
	2) __lock_page_or_retry

1) is not very problematic because TIF_MEMDIE leads to an allocation
failure and getting out from page allocator.

2) is more problematic.  In an OOM situation, zones typically don't have
page cache at all and memory starvation might lead to greatly reduced IO
performance.  When a fork bomb occurs, TIF_MEMDIE tasks don't die quickly,
meaning that a fork bomb may create new process quickly rather than the
oom-killer killing it.  Then, the system may become livelocked.

This patch makes the pagefault interruptible by SIGKILL.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 08:39:08 -07:00
KOSAKI Motohiro
f62e00cc3a mm: introduce wait_on_page_locked_killable()
commit 2687a356 ("Add lock_page_killable") introduced killable
lock_page().  Similarly this patch introdues killable
wait_on_page_locked().

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 08:39:08 -07:00
Linus Torvalds
d39dd11c3e Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  fs: simplify iget & friends
  fs: pull inode->i_lock up out of writeback_single_inode
  fs: rename inode_lock to inode_hash_lock
  fs: move i_wb_list out from under inode_lock
  fs: move i_sb_list out from under inode_lock
  fs: remove inode_lock from iput_final and prune_icache
  fs: Lock the inode LRU list separately
  fs: factor inode disposal
  fs: protect inode->i_state with inode->i_lock
  autofs4: Do not potentially dereference NULL pointer returned by fget() in autofs_dev_ioctl_setpipefd()
  autofs4 - remove autofs4_lock
  autofs4 - fix d_manage() return on rcu-walk
  autofs4 - fix autofs4_expire_indirect() traversal
  autofs4 - fix dentry leak in autofs4_expire_direct()
  autofs4 - reinstate last used update on access
  vfs - check non-mountpoint dentry might block in __follow_mount_rcu()
2011-03-24 19:01:30 -07:00
Dave Chinner
a66979abad fs: move i_wb_list out from under inode_lock
Protect the inode writeback list with a new global lock
inode_wb_list_lock and use it to protect the list manipulations and
traversals. This lock replaces the inode_lock as the inodes on the
list can be validity checked while holding the inode->i_lock and
hence the inode_lock is no longer needed to protect the list.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-03-24 21:17:51 -04:00
Dave Chinner
250df6ed27 fs: protect inode->i_state with inode->i_lock
Protect inode state transitions and validity checks with the
inode->i_lock. This enables us to make inode state transitions
independently of the inode_lock and is the first step to peeling
away the inode_lock from the code.

This requires that __iget() is done atomically with i_state checks
during list traversals so that we don't race with another thread
marking the inode I_FREEING between the state check and grabbing the
reference.

Also remove the unlock_new_inode() memory barrier optimisation
required to avoid taking the inode_lock when clearing I_NEW.
Simplify the code by simply taking the inode->i_lock around the
state change and wakeup. Because the wakeup is no longer tricky,
remove the wake_up_inode() function and open code the wakeup where
necessary.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-03-24 21:16:31 -04:00
Linus Torvalds
6c51038900 Merge branch 'for-2.6.39/core' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.39/core' of git://git.kernel.dk/linux-2.6-block: (65 commits)
  Documentation/iostats.txt: bit-size reference etc.
  cfq-iosched: removing unnecessary think time checking
  cfq-iosched: Don't clear queue stats when preempt.
  blk-throttle: Reset group slice when limits are changed
  blk-cgroup: Only give unaccounted_time under debug
  cfq-iosched: Don't set active queue in preempt
  block: fix non-atomic access to genhd inflight structures
  block: attempt to merge with existing requests on plug flush
  block: NULL dereference on error path in __blkdev_get()
  cfq-iosched: Don't update group weights when on service tree
  fs: assign sb->s_bdi to default_backing_dev_info if the bdi is going away
  block: Require subsystems to explicitly allocate bio_set integrity mempool
  jbd2: finish conversion from WRITE_SYNC_PLUG to WRITE_SYNC and explicit plugging
  jbd: finish conversion from WRITE_SYNC_PLUG to WRITE_SYNC and explicit plugging
  fs: make fsync_buffers_list() plug
  mm: make generic_writepages() use plugging
  blk-cgroup: Add unaccounted time to timeslice_used.
  block: fixup plugging stubs for !CONFIG_BLOCK
  block: remove obsolete comments for blkdev_issue_zeroout.
  blktrace: Use rq->cmd_flags directly in blk_add_trace_rq.
  ...

Fix up conflicts in fs/{aio.c,super.c}
2011-03-24 10:16:26 -07:00
Hugh Dickins
5b280c0cc7 mm: don't return 0 too early from find_get_pages()
Callers of find_get_pages(), or its wrapper pagevec_lookup() - notably
truncate_inode_pages_range() - stop looking further when it returns 0.

But if an interrupt comes just after its radix_tree_gang_lookup_slot(),
especially if we have preemptible RCU enabled, isn't it conceivable that
all 14 pages returned could be removed from the page cache by
shrink_page_list(), before find_get_pages() gets to process them?  So
causing it to return 0 although there may be plenty more pages beyond.

Make find_get_pages() and find_get_pages_tag() check for this unlikely
case, and restart should it occur; but callers of find_get_pages_contig()
have no such expectation, it's okay for that to return 0 early.

I have not seen this in practice, just worried by the possibility.

Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Salman Qazi <sqazi@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 17:44:04 -07:00
Hugh Dickins
9d8aa4ea85 mm: remove worrying dead code from find_get_pages()
The radix_tree_deref_retry() case in find_get_pages() has a strange little
excrescence, not seen in the other gang lookups: it looks like the start
of an abandoned attempt to guarantee forward progress in a case that
cannot arise.

ret should always be 0 here: if it isn't, then going back to restart will
leak references to pages already gotten.  There used to be a comment
saying nr_found is necessarily 1 here: that's not quite true, but the
radix_tree_deref_retry() case is peculiar to the entry at index 0, when we
race with it being moved out of the radix_tree root or back.

Remove the worrisome two lines, add a brief comment here and in
find_get_pages_contig() and find_get_pages_tag(), and a WARN_ON in
find_get_pages() should it ever be seen elsewhere than at 0.

Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Salman Qazi <sqazi@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 17:44:04 -07:00
Minchan Kim
e64a782fec mm: change __remove_from_page_cache()
Now we renamed remove_from_page_cache with delete_from_page_cache.  As
consistency of __remove_from_swap_cache and remove_from_swap_cache, we
change internal page cache handling function name, too.

Signed-off-by: Minchan Kim <minchan.kim@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 17:44:02 -07:00
Minchan Kim
702cfbf93a mm: goodbye remove_from_page_cache()
Now delete_from_page_cache() replaces remove_from_page_cache().  So we
remove remove_from_page_cache so fs or something out of mainline will
notice it when compile time and can fix it.

Signed-off-by: Minchan Kim <minchan.kim@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 17:44:02 -07:00
Minchan Kim
97cecb5a25 mm: introduce delete_from_page_cache()
Presently we increase the page refcount in add_to_page_cache() but don't
decrease it in remove_from_page_cache().  Such asymmetry adds confusion,
requiring that callers notice it and a comment explaining why they release
a page reference.  It's not a good API.

A long time ago, Hugh tried it (http://lkml.org/lkml/2004/10/24/140) but
gave up because reiser4's drop_page() had to unlock the page between
removing it from page cache and doing the page_cache_release().  But now
the situation is changed.  I think at least things in current mainline
don't have any obstacles.  The problem is for out-of-mainline filesystems
- if they have done such things as reiser4, this patch could be a problem
but they will discover this at compile time since we remove
remove_from_page_cache().

This patch:

This function works as just wrapper remove_from_page_cache().  The
difference is that it decreases page references in itself.  So caller have
to make sure it has a page reference before calling.

This patch is ready for removing remove_from_page_cache().

Signed-off-by: Minchan Kim <minchan.kim@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Edward Shishkin <edward.shishkin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 17:44:02 -07:00
Miklos Szeredi
ef6a3c6311 mm: add replace_page_cache_page() function
This function basically does:

     remove_from_page_cache(old);
     page_cache_release(old);
     add_to_page_cache_locked(new);

Except it does this atomically, so there's no possibility for the "add" to
fail because of a race.

If memory cgroups are enabled, then the memory cgroup charge is also moved
from the old page to the new.

This function is currently used by fuse to move pages into the page cache
on read, instead of copying the page contents.

[minchan.kim@gmail.com: add freepage() hook to replace_page_cache_page()]
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 17:44:02 -07:00
Gleb Natapov
318b275fbc mm: allow GUP to fail instead of waiting on a page
GUP user may want to try to acquire a reference to a page if it is already
in memory, but not if IO, to bring it in, is needed.  For example KVM may
tell vcpu to schedule another guest process if current one is trying to
access swapped out page.  Meanwhile, the page will be swapped in and the
guest process, that depends on it, will be able to run again.

This patch adds FAULT_FLAG_RETRY_NOWAIT (suggested by Linus) and
FOLL_NOWAIT follow_page flags.  FAULT_FLAG_RETRY_NOWAIT, when used in
conjunction with VM_FAULT_ALLOW_RETRY, indicates to handle_mm_fault that
it shouldn't drop mmap_sem and wait on a page, but return VM_FAULT_RETRY
instead.

[akpm@linux-foundation.org: improve FOLL_NOWAIT comment]
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Hugh Dickins <hughd@google.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 17:44:02 -07:00
Jens Axboe
55602dd66f fs: make generic file read/write functions plug
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-10 08:52:26 +01:00
Jens Axboe
7eaceaccab block: remove per-queue plugging
Code has been converted over to the new explicit on-stack plugging,
and delay users have been converted to use the new API for that.
So lets kill off the old plugging along with aops->sync_page().

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-10 08:52:07 +01:00
Steven Rostedt
c585a2678d mm: remove likely() from grab_cache_page_write_begin()
Running the annotated branch profiler on a box doing average work
(firefox, evolution, xchat, distcc farm), the likely() used in
grab_cache_page_write_begin() was incorrect most of the time:

 correct incorrect  %        Function                  File              Line
 ------- ---------  -        --------                  ----              ----
 1924262 71332401  97 grab_cache_page_write_begin    filemap.c           2206

Adding a trace_printk() and running the function tracer limited to
just this function I can see:

        gconfd-2-2696  [000]  4467.268935: grab_cache_page_write_begin: page=          (null) mapping=ffff8800676a9460 index=7
        gconfd-2-2696  [000]  4467.268946: grab_cache_page_write_begin <-ext3_write_begin
        gconfd-2-2696  [000]  4467.268947: grab_cache_page_write_begin: page=          (null) mapping=ffff8800676a9460 index=8
        gconfd-2-2696  [000]  4467.268959: grab_cache_page_write_begin <-ext3_write_begin
        gconfd-2-2696  [000]  4467.268960: grab_cache_page_write_begin: page=          (null) mapping=ffff8800676a9460 index=9
        gconfd-2-2696  [000]  4467.268972: grab_cache_page_write_begin <-ext3_write_begin
        gconfd-2-2696  [000]  4467.268973: grab_cache_page_write_begin: page=          (null) mapping=ffff8800676a9460 index=10
        gconfd-2-2696  [000]  4467.268991: grab_cache_page_write_begin <-ext3_write_begin
        gconfd-2-2696  [000]  4467.268992: grab_cache_page_write_begin: page=          (null) mapping=ffff8800676a9460 index=11
        gconfd-2-2696  [000]  4467.269005: grab_cache_page_write_begin <-ext3_write_begin

Which shows that a lot of calls from ext3_write_begin will result in the
page returned by "find_lock_page" will be NULL.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Nick Piggin <npiggin@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 17:32:36 -08:00
Rik van Riel
212260aa07 mm: clear PageError bit in msync & fsync
Temporary IO failures, eg.  due to loss of both multipath paths, can
permanently leave the PageError bit set on a page, resulting in msync or
fsync returning -EIO over and over again, even if IO is now getting to the
disk correctly.

We already clear the AS_ENOSPC and AS_IO bits in mapping->flags in the
filemap_fdatawait_range function.  Also clearing the PageError bit on the
page allows subsequent msync or fsync calls on this file to return without
an error, if the subsequent IO succeeds.

Unfortunately data written out in the msync or fsync call that returned
-EIO can still get lost, because the page dirty bit appears to not get
restored on IO error.  However, the alternative could be potentially all
of memory filling up with uncleanable dirty pages, hanging the system, so
there is no nice choice here...

Signed-off-by: Rik van Riel <riel@redhat.com>
Acked-by: Valerie Aurora <vaurora@redhat.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 17:32:35 -08:00
Nick Piggin
9cbb4cb21b mm: find_get_pages_contig fixlet
Testing ->mapping and ->index without a ref is not stable as the page
may have been reused at this point.

Signed-off-by: Nick Piggin <npiggin@kernel.dk>
Reviewed-by: Wu Fengguang <fengguang.wu@intel.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 17:32:32 -08:00
Nick Piggin
b5c84bf6f6 fs: dcache remove dcache_lock
dcache_lock no longer protects anything. remove it.

Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 17:50:23 +11:00
Linus Torvalds
6072d13c42 Call the filesystem back whenever a page is removed from the page cache
NFS needs to be able to release objects that are stored in the page
cache once the page itself is no longer visible from the page cache.

This patch adds a callback to the address space operations that allows
filesystems to perform page cleanups once the page has been removed
from the page cache.

Original patch by: Linus Torvalds <torvalds@linux-foundation.org>
[trondmy: cover the cases of invalidate_inode_pages2() and
          truncate_inode_pages()]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-12-02 09:55:21 -05:00
Nick Piggin
27d20fddc8 radix-tree: fix RCU bug
Salman Qazi describes the following radix-tree bug:

In the following case, we get can get a deadlock:

0.  The radix tree contains two items, one has the index 0.
1.  The reader (in this case find_get_pages) takes the rcu_read_lock.
2.  The reader acquires slot(s) for item(s) including the index 0 item.
3.  The non-zero index item is deleted, and as a consequence the other item is
    moved to the root of the tree. The place where it used to be is queued for
    deletion after the readers finish.
3b. The zero item is deleted, removing it from the direct slot, it remains in
    the rcu-delayed indirect node.
4.  The reader looks at the index 0 slot, and finds that the page has 0 ref
    count
5.  The reader looks at it again, hoping that the item will either be freed or
    the ref count will increase. This never happens, as the slot it is looking
    at will never be updated. Also, this slot can never be reclaimed because
    the reader is holding rcu_read_lock and is in an infinite loop.

The fix is to re-use the same "indirect" pointer case that requires a slot
lookup retry into a general "retry the lookup" bit.

Signed-off-by: Nick Piggin <npiggin@kernel.dk>
Reported-by: Salman Qazi <sqazi@google.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-12 07:55:32 -08:00
Dave Hansen
8d056cb965 mm/vfs: revalidate page->mapping in do_generic_file_read()
70 hours into some stress tests of a 2.6.32-based enterprise kernel, we
ran into a NULL dereference in here:

	int block_is_partially_uptodate(struct page *page, read_descriptor_t *desc,
	                                        unsigned long from)
	{
---->		struct inode *inode = page->mapping->host;

It looks like page->mapping was the culprit.  (xmon trace is below).
After closer examination, I realized that do_generic_file_read() does a
find_get_page(), and eventually locks the page before calling
block_is_partially_uptodate().  However, it doesn't revalidate the
page->mapping after the page is locked.  So, there's a small window
between the find_get_page() and ->is_partially_uptodate() where the page
could get truncated and page->mapping cleared.

We _have_ a reference, so it can't get reclaimed, but it certainly
can be truncated.

I think the correct thing is to check page->mapping after the
trylock_page(), and jump out if it got truncated.  This patch has been
running in the test environment for a month or so now, and we have not
seen this bug pop up again.

xmon info:

  1f:mon> e
  cpu 0x1f: Vector: 300 (Data Access) at [c0000002ae36f770]
      pc: c0000000001e7a6c: .block_is_partially_uptodate+0xc/0x100
      lr: c000000000142944: .generic_file_aio_read+0x1e4/0x770
      sp: c0000002ae36f9f0
     msr: 8000000000009032
     dar: 0
   dsisr: 40000000
    current = 0xc000000378f99e30
    paca    = 0xc000000000f66300
      pid   = 21946, comm = bash
  1f:mon> r
  R00 = 0025c0500000006d   R16 = 0000000000000000
  R01 = c0000002ae36f9f0   R17 = c000000362cd3af0
  R02 = c000000000e8cd80   R18 = ffffffffffffffff
  R03 = c0000000031d0f88   R19 = 0000000000000001
  R04 = c0000002ae36fa68   R20 = c0000003bb97b8a0
  R05 = 0000000000000000   R21 = c0000002ae36fa68
  R06 = 0000000000000000   R22 = 0000000000000000
  R07 = 0000000000000001   R23 = c0000002ae36fbb0
  R08 = 0000000000000002   R24 = 0000000000000000
  R09 = 0000000000000000   R25 = c000000362cd3a80
  R10 = 0000000000000000   R26 = 0000000000000002
  R11 = c0000000001e7b60   R27 = 0000000000000000
  R12 = 0000000042000484   R28 = 0000000000000001
  R13 = c000000000f66300   R29 = c0000003bb97b9b8
  R14 = 0000000000000001   R30 = c000000000e28a08
  R15 = 000000000000ffff   R31 = c0000000031d0f88
  pc  = c0000000001e7a6c .block_is_partially_uptodate+0xc/0x100
  lr  = c000000000142944 .generic_file_aio_read+0x1e4/0x770
  msr = 8000000000009032   cr  = 22000488
  ctr = c0000000001e7a60   xer = 0000000020000000   trap =  300
  dar = 0000000000000000   dsisr = 40000000
  1f:mon> t
  [link register   ] c000000000142944 .generic_file_aio_read+0x1e4/0x770
  [c0000002ae36f9f0] c000000000142a14 .generic_file_aio_read+0x2b4/0x770 (unreliable)
  [c0000002ae36fb40] c0000000001b03e4 .do_sync_read+0xd4/0x160
  [c0000002ae36fce0] c0000000001b153c .vfs_read+0xec/0x1f0
  [c0000002ae36fd80] c0000000001b1768 .SyS_read+0x58/0xb0
  [c0000002ae36fe30] c00000000000852c syscall_exit+0x0/0x40
  --- Exception: c00 (System Call) at 00000080a840bc54
  SP (fffca15df30) is in userspace
  1f:mon> di c0000000001e7a6c
  c0000000001e7a6c  e9290000      ld      r9,0(r9)
  c0000000001e7a70  418200c0      beq     c0000000001e7b30        # .block_is_partially_uptodate+0xd0/0x100
  c0000000001e7a74  e9440008      ld      r10,8(r4)
  c0000000001e7a78  78a80020      clrldi  r8,r5,32
  c0000000001e7a7c  3c000001      lis     r0,1
  c0000000001e7a80  812900a8      lwz     r9,168(r9)
  c0000000001e7a84  39600001      li      r11,1
  c0000000001e7a88  7c080050      subf    r0,r8,r0
  c0000000001e7a8c  7f805040      cmplw   cr7,r0,r10
  c0000000001e7a90  7d6b4830      slw     r11,r11,r9
  c0000000001e7a94  796b0020      clrldi  r11,r11,32
  c0000000001e7a98  419d00a8      bgt     cr7,c0000000001e7b40    # .block_is_partially_uptodate+0xe0/0x100
  c0000000001e7a9c  7fa55840      cmpld   cr7,r5,r11
  c0000000001e7aa0  7d004214      add     r8,r0,r8
  c0000000001e7aa4  79080020      clrldi  r8,r8,32
  c0000000001e7aa8  419c0078      blt     cr7,c0000000001e7b20    # .block_is_partially_uptodate+0xc0/0x100

Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Reviewed-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: <arunabal@in.ibm.com>
Cc: <sbest@us.ibm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-12 07:55:31 -08:00
Michel Lespinasse
d88c0922fa Release page reference during page fault retry
This slipped by when unifying the filemap and swap versions of
lock_page_or_retry()...

Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-02 17:02:31 -04:00
Namhyung Kim
0116651c85 mm: remove temporary variable on generic_file_direct_write()
'end' shadows earlier one and is not necessary at all.  Remove it and use
'pos' instead.  This removes following sparse warnings:

 mm/filemap.c:2180:24: warning: symbol 'end' shadows an earlier one
 mm/filemap.c:2132:25: originally declared here

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:09 -07:00
Michel Lespinasse
d065bd810b mm: retry page fault when blocking on disk transfer
This change reduces mmap_sem hold times that are caused by waiting for
disk transfers when accessing file mapped VMAs.

It introduces the VM_FAULT_ALLOW_RETRY flag, which indicates that the call
site wants mmap_sem to be released if blocking on a pending disk transfer.
In that case, filemap_fault() returns the VM_FAULT_RETRY status bit and
do_page_fault() will then re-acquire mmap_sem and retry the page fault.

It is expected that the retry will hit the same page which will now be
cached, and thus it will complete with a low mmap_sem hold time.

Tests:

- microbenchmark: thread A mmaps a large file and does random read accesses
  to the mmaped area - achieves about 55 iterations/s. Thread B does
  mmap/munmap in a loop at a separate location - achieves 55 iterations/s
  before, 15000 iterations/s after.

- We are seeing related effects in some applications in house, which show
  significant performance regressions when running without this change.

[akpm@linux-foundation.org: fix warning & crash]
Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Reviewed-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Ying Han <yinghan@google.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: "H. Peter Anvin" <hpa@zytor.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:09 -07:00
Michel Lespinasse
b522c94da5 mm: filemap_fault: unique path for locking page
Introduce a single location where filemap_fault() locks the desired page.
There used to be two such places, depending if the initial find_get_page()
was successful or not.

Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Reviewed-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Ying Han <yinghan@google.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:09 -07:00
Andi Kleen
4e60c86bd9 gcc-4.6: mm: fix unused but set warnings
No real bugs, just some dead code and some fixups.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-09 20:44:58 -07:00
Linus Torvalds
003386fff3 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  mm: export generic_pipe_buf_*() to modules
  fuse: support splice() reading from fuse device
  fuse: allow splice to move pages
  mm: export remove_from_page_cache() to modules
  mm: export lru_cache_add_*() to modules
  fuse: support splice() writing to fuse device
  fuse: get page reference for readpages
  fuse: use get_user_pages_fast()
  fuse: remove unneeded variable
2010-05-30 09:16:14 -07:00
Linus Torvalds
105a048a4f Merge git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: (27 commits)
  Btrfs: add more error checking to btrfs_dirty_inode
  Btrfs: allow unaligned DIO
  Btrfs: drop verbose enospc printk
  Btrfs: Fix block generation verification race
  Btrfs: fix preallocation and nodatacow checks in O_DIRECT
  Btrfs: avoid ENOSPC errors in btrfs_dirty_inode
  Btrfs: move O_DIRECT space reservation to btrfs_direct_IO
  Btrfs: rework O_DIRECT enospc handling
  Btrfs: use async helpers for DIO write checksumming
  Btrfs: don't walk around with task->state != TASK_RUNNING
  Btrfs: do aio_write instead of write
  Btrfs: add basic DIO read/write support
  direct-io: do not merge logically non-contiguous requests
  direct-io: add a hook for the fs to provide its own submit_bio function
  fs: allow short direct-io reads to be completed via buffered IO
  Btrfs: Metadata ENOSPC handling for balance
  Btrfs: Pre-allocate space for data relocation
  Btrfs: Metadata ENOSPC handling for tree log
  Btrfs: Metadata reservation for orphan inodes
  Btrfs: Introduce global metadata reservation
  ...
2010-05-27 10:43:44 -07:00
Jeff Moyer
91803b499c do_generic_file_read: clear page errors when issuing a fresh read of the page
I/O errors can happen due to temporary failures, like multipath
errors or losing network contact with the iSCSI server. Because
of that, the VM will retry readpage on the page.

However, do_generic_file_read does not clear PG_error.  This
causes the system to be unable to actually use the data in the
page cache page, even if the subsequent readpage completes
successfully!

The function filemap_fault has had a ClearPageError before
readpage forever.  This patch simply adds the same to
do_generic_file_read.

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Rik van Riel <riel@redhat.com>
Acked-by: Larry Woodman <lwoodman@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-26 10:20:27 -07:00
Miao Xie
c0ff7453bb cpuset,mm: fix no node to alloc memory when changing cpuset's mems
Before applying this patch, cpuset updates task->mems_allowed and
mempolicy by setting all new bits in the nodemask first, and clearing all
old unallowed bits later.  But in the way, the allocator may find that
there is no node to alloc memory.

The reason is that cpuset rebinds the task's mempolicy, it cleans the
nodes which the allocater can alloc pages on, for example:

(mpol: mempolicy)
	task1			task1's mpol	task2
	alloc page		1
	  alloc on node0? NO	1
				1		change mems from 1 to 0
				1		rebind task1's mpol
				0-1		  set new bits
				0	  	  clear disallowed bits
	  alloc on node1? NO	0
	  ...
	can't alloc page
	  goto oom

This patch fixes this problem by expanding the nodes range first(set newly
allowed bits) and shrink it lazily(clear newly disallowed bits).  So we
use a variable to tell the write-side task that read-side task is reading
nodemask, and the write-side task clears newly disallowed nodes after
read-side task ends the current memory allocation.

[akpm@linux-foundation.org: fix spello]
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Paul Menage <menage@google.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Ravikiran Thirumalai <kiran@scalex86.org>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-25 08:06:57 -07:00
KOSAKI Motohiro
e9d6c15738 tmpfs: insert tmpfs cache pages to inactive list at first
Shaohua Li reported parallel file copy on tmpfs can lead to OOM killer.
This is regression of caused by commit 9ff473b9a7 ("vmscan: evict
streaming IO first").  Wow, It is 2 years old patch!

Currently, tmpfs file cache is inserted active list at first.  This means
that the insertion doesn't only increase numbers of pages in anon LRU, but
it also reduces anon scanning ratio.  Therefore, vmscan will get totally
confused.  It scans almost only file LRU even though the system has plenty
unused tmpfs pages.

Historically, lru_cache_add_active_anon() was used for two reasons.
1) Intend to priotize shmem page rather than regular file cache.
2) Intend to avoid reclaim priority inversion of used once pages.

But we've lost both motivation because (1) Now we have separate anon and
file LRU list.  then, to insert active list doesn't help such priotize.
(2) In past, one pte access bit will cause page activation.  then to
insert inactive list with pte access bit mean higher priority than to
insert active list.  Its priority inversion may lead to uninteded lru
chun.  but it was already solved by commit 645747462 (vmscan: detect
mapped file pages used only once).  (Thanks Hannes, you are great!)

Thus, now we can use lru_cache_add_anon() instead.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reported-by: Shaohua Li <shaohua.li@intel.com>
Reviewed-by: Wu Fengguang <fengguang.wu@intel.com>
Reviewed-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-25 08:06:56 -07:00
Josef Bacik
66f998f611 fs: allow short direct-io reads to be completed via buffered IO
This is similar to what already happens in the write case.  If we have a short
read while doing O_DIRECT, instead of just returning, fallthrough and try to
read the rest via buffered IO.  BTRFS needs this because if we encounter a
compressed or inline extent during DIO, we need to fallback on buffered.  If the
extent is compressed we need to read the entire thing into memory and
de-compress it into the users pages.  I have tested this with fsx and everything
works great.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-05-25 10:34:55 -04:00
Miklos Szeredi
a52116aba5 mm: export remove_from_page_cache() to modules
This is needed to enable moving pages into the page cache in fuse with
splice(..., SPLICE_F_MOVE).

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2010-05-25 15:06:06 +02:00
Tejun Heo
5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Jiri Slaby
59e99e5b97 mm: use rlimit helpers
Make sure compiler won't do weird things with limits.  E.g.  fetching them
twice may return 2 different values after writable limits are implemented.

I.e.  either use rlimit helpers added in
3e10e716ab ("resource: add helpers for
fetching rlimits") or ACCESS_ONCE if not applicable.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06 11:26:24 -08:00
Christoph Hellwig
2ecdc82ef0 kill unused invalidate_inode_pages helper
No one is calling this anymore as everyone has switched to
invalidate_mapping_pages long time ago.  Also update a few
references to it in comments.  nfs has two more, but I can't
easily figure what they are actually referring to, so I left
them as-is.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-03-03 14:07:55 -05:00
anfei zhou
931e80e4b3 mm: flush dcache before writing into page to avoid alias
The cache alias problem will happen if the changes of user shared mapping
is not flushed before copying, then user and kernel mapping may be mapped
into two different cache line, it is impossible to guarantee the coherence
after iov_iter_copy_from_user_atomic.  So the right steps should be:

	flush_dcache_page(page);
	kmap_atomic(page);
	write to page;
	kunmap_atomic(page);
	flush_dcache_page(page);

More precisely, we might create two new APIs flush_dcache_user_page and
flush_dcache_kern_page to replace the two flush_dcache_page accordingly.

Here is a snippet tested on omap2430 with VIPT cache, and I think it is
not ARM-specific:

	int val = 0x11111111;
	fd = open("abc", O_RDWR);
	addr = mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0);
	*(addr+0) = 0x44444444;
	tmp = *(addr+0);
	*(addr+1) = 0x77777777;
	write(fd, &val, sizeof(int));
	close(fd);

The results are not always 0x11111111 0x77777777 at the beginning as expected.  Sometimes we see 0x44444444 0x77777777.

Signed-off-by: Anfei <anfei.zhou@gmail.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: <linux-arch@vger.kernel.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-02-02 18:11:21 -08:00
Linus Torvalds
0531b2aac5 mm: add new 'read_cache_page_gfp()' helper function
It's a simplified 'read_cache_page()' which takes a page allocation
flag, so that different paths can control how aggressive the memory
allocations are that populate a address space.

In particular, the intel GPU object mapping code wants to be able to do
a certain amount of own internal memory management by automatically
shrinking the address space when memory starts getting tight.  This
allows it to dynamically use different memory allocation policies on a
per-allocation basis, rather than depend on the (static) address space
gfp policy.

The actual new function is a one-liner, but re-organizing the helper
functions to the point where you can do this with a single line of code
is what most of the patch is all about.

Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-27 09:20:03 -08:00
Christoph Hellwig
c05c4edd87 direct I/O fallback sync simplification
In the case of direct I/O falling back to buffered I/O we sync data
twice currently: once at the end of generic_file_buffered_write using
filemap_write_and_wait_range and once a little later in
__generic_file_aio_write using do_sync_mapping_range with all flags set.

The wait before write of the do_sync_mapping_range call does not make
any sense, so just keep the filemap_write_and_wait_range call and move
it to the right spot.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-12-16 12:16:50 -05:00