Commit Graph

682 Commits

Author SHA1 Message Date
Dave Airlie
6ac3bd5270 PCI/vgaarb: cleanup some warnings + cleanup some comments.
Fix some warnings reported in linux-next + also cleanup some
comment errors noticed by Pekka Paalanen.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-09-09 13:29:41 -07:00
Benjamin Herrenschmidt
deb2d2ecd4 PCI/GPU: implement VGA arbitration on Linux
Background:
Graphic devices are accessed through ranges in I/O or memory space. While most
modern devices allow relocation of such ranges, some "Legacy" VGA devices
implemented on PCI will typically have the same "hard-decoded" addresses as
they did on ISA. For more details see "PCI Bus Binding to IEEE Std 1275-1994
Standard for Boot (Initialization Configuration) Firmware Revision 2.1"
Section 7, Legacy Devices.

The Resource Access Control (RAC) module inside the X server currently does
the task of arbitration when more than one legacy device co-exists on the same
machine. But the problem happens when these devices are trying to be accessed
by different userspace clients (e.g. two server in parallel). Their address
assignments conflict. Therefore an arbitration scheme _outside_ of the X
server is needed to control the sharing of these resources. This document
introduces the operation of the VGA arbiter implemented for Linux kernel.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-09-09 13:29:36 -07:00
Linus Torvalds
e6890f6f3d i915: disable interrupts before tearing down GEM state
Reinette Chatre reports a frozen system (with blinking keyboard LEDs)
when switching from graphics mode to the text console, or when
suspending (which does the same thing). With netconsole, the oops
turned out to be

	BUG: unable to handle kernel NULL pointer dereference at 0000000000000084
	IP: [<ffffffffa03ecaab>] i915_driver_irq_handler+0x26b/0xd20 [i915]

and it's due to the i915_gem.c code doing drm_irq_uninstall() after
having done i915_gem_idle(). And the i915_gem_idle() path will do

  i915_gem_idle() ->
    i915_gem_cleanup_ringbuffer() ->
      i915_gem_cleanup_hws() ->
        dev_priv->hw_status_page = NULL;

but if an i915 interrupt comes in after this stage, it may want to
access that hw_status_page, and gets the above NULL pointer dereference.

And since the NULL pointer dereference happens from within an interrupt,
and with the screen still in graphics mode, the common end result is
simply a silently hung machine.

Fix it by simply uninstalling the irq handler before idling rather than
after. Fixes

    http://bugzilla.kernel.org/show_bug.cgi?id=13819

Reported-and-tested-by: Reinette Chatre <reinette.chatre@intel.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-08 17:09:24 -07:00
Zhenyu Wang
7c8460db30 drm/i915: fix mask bits setting
eDP is exclusive connector too, and add missing crtc_mask
setting for TV.

This fixes

	http://bugzilla.kernel.org/show_bug.cgi?id=14139

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Reported-and-tested-by: Carlos R. Mafra <crmafra2@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-08 10:16:20 -07:00
Linus Torvalds
3ff323f890 Merge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/radeon/kms: add LTE/GTE discard + rv515 two sided stencil register.
2009-09-07 11:42:25 -07:00
Dave Airlie
a54775c875 drm/radeon/kms: add LTE/GTE discard + rv515 two sided stencil register.
This adds some rv350+ register for LTE/GTE discard,
and enables the rv515 two sided stencil register.
It also disables the DEPTHXY_OFFSET register which
can be used to workaround the CS checker.
Moves rs690 to proper place in rs600 and uses correct
table on rs600.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-07 15:26:19 +10:00
Chris Wilson
58c2fb647a drm/i915: Unref old_obj on get_fence_reg() error path
Remember to release the local reference if we fail to wait on
the rendering.

(Also whilst in the vicinity add some whitespace so that the phasing of
the operations is clearer.)

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-09-02 10:49:02 -07:00
Jesse Barnes
bcc24fb425 drm/i915: increase default latency constant (v2 w/comment)
Some i915/i945 platforms have a fairly high memory latency in certain
situations, so increase our constant a bit to avoid FIFO underruns.
The effect should be positive on other platforms as well; we'll have a
bit more insurance against a busy memory subsystem due to the extra
FIFO entries.

Fixes fdo bug #23368.  Needed for 2.6.31.

Tested-by: Sven Arvidsson <sa@whiz.se>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-09-02 10:33:01 -07:00
Linus Torvalds
b5af754405 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel:
  drm/i915: Improve CRTDDC mapping by using VBT info
  drm/i915: Fix CPU-spinning hangs related to fence usage by using an LRU.
  drm/i915: Set crtc/clone mask in different output devices
  drm/i915: Always use SDVO_B detect bit for SDVO output detection.
  drm/i915: Fix typo that broke SVID1 in intel_sdvo_multifunc_encoder()
  drm/i915: Check if BIOS enabled dual-channel LVDS on 8xx, not only on 9xx
  drm/i915: Set the multiplier for SDVO on G33 platform
2009-08-31 17:22:10 -10:00
David Müller (ELSOFT AG)
db54501900 drm/i915: Improve CRTDDC mapping by using VBT info
Use VBT information to determine which DDC bus to use for CRTDCC.
Fall back to GPIOA if VBT info is not available.

Signed-off-by: David Müller <d.mueller@elsoft.ch>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Tested on: 855 (David), and 945GM, 965GM, GM45, and G45 (anholt)
2009-08-29 18:23:40 -07:00
Eric Anholt
a09ba7faf7 drm/i915: Fix CPU-spinning hangs related to fence usage by using an LRU.
The lack of a proper LRU was partially worked around by taking the fence
from the object containing the oldest seqno.  But if there are multiple
objects inactive, then they don't have seqnos and the first fence reg
among them would be chosen.  If you were trying to copy data between two
mappings, this could result in each page fault stealing the fence from
the other argument, and your application hanging.

https://bugs.freedesktop.org/show_bug.cgi?id=23566
https://bugs.freedesktop.org/show_bug.cgi?id=23220
https://bugs.freedesktop.org/show_bug.cgi?id=23253
https://bugs.freedesktop.org/show_bug.cgi?id=23366

Cc: Stable Team <stable@kernel.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2009-08-29 17:37:21 -07:00
Ma Ling
f8aed700c6 drm/i915: Set crtc/clone mask in different output devices
Based on Bspec each encoder has different sharing pipe property,
i.e. Integrated or SDVO TV both will occupy one pipe exclusively,
and sdvo-non-tv and crt are allowed to share one. The patch moves
sharing judgment into differnet output functions, and sets the right
clone bit.

This fixes both HDMI outputs choosing the same pipe.

https://bugs.freedesktop.org/show_bug.cgi?id=22247

Signed-off-by: Ma Ling <ling.ma@intel.com>
Reviewed-by : Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-08-24 17:01:33 -07:00
Ma Ling
27185ae1b7 drm/i915: Always use SDVO_B detect bit for SDVO output detection.
After the following commit is shipped, the SDVO C detection will depend on
the SDVO_C/DP detion bit.
commit 13520b051e
Author: Kristian Høgsberg <krh@redhat.com>
Date:   Fri Mar 13 15:42:14 2009 -0400

    drm/i915: Read the right SDVO register when detecting SVDO/HDMI.

According to the spec we should continue to detect the SDVO_B/C based on
the SDVO_B detection bit.  The new detection bit on G4X platform is for
the HDMI_C detection rather than SDVO_C detection.

https://bugs.freedesktop.org/show_bug.cgi?id=20639

Signed-off-by: Ma Ling <ling.ma@intel.com>
Acked-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-08-24 16:58:44 -07:00
Roel Kluin
19e1f888c6 drm/i915: Fix typo that broke SVID1 in intel_sdvo_multifunc_encoder()
Bit SDVO_OUTPUT_SVID0 was tested twice

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-08-24 16:41:23 -07:00
Bruno Prémont
bc5e5718ac drm/i915: Check if BIOS enabled dual-channel LVDS on 8xx, not only on 9xx
Commit 0c2e39525b is not sufficient to
get fd.o bug #20115 fixed.
In addition intel_find_best_PLL() must not only rely on BIOS settings
for i9xx chips but also for i8xx, so drop the IS_I9XX() check.

Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-08-24 16:41:22 -07:00
Sean Young
942642a412 drm/i915: Set the multiplier for SDVO on G33 platform
http://bugs.freedesktop.org/show_bug.cgi?id=21417

Signed-off-by: Sean Young <sean@mess.org>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-08-24 16:41:22 -07:00
Michel Dänzer
9f844e5118 drm/radeon/kms: Fix radeon_gem_busy_ioctl harder.
It was mixing up TTM placement values and flags.

Signed-off-by: Michel Dänzer <daenzer@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-23 11:36:13 +10:00
Alex Deucher
f779b3e513 drm/radeon: add GET_PARAM/INFO support for Z pipes
Needed for occlusion queries on rv530 chips.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-21 19:10:30 +10:00
Dave Airlie
17782d9950 drm/radeon/kms: add r100/r200 OQ support.
This adds the relocation necessary for OQ support on the r100/r200
chipsets.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-21 10:07:54 +10:00
Thomas Hellstrom
08e4d53474 drm: Fix sysfs device confusion.
The drm sysfs class suspend / resume methods could not distinguish
between different device types wich could lead to illegal type casts.

Use struct device_type and make sure the class suspend / resume callbacks
are aware of those. There is no per device-type suspend / resume. Only
new-style PM.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-21 10:01:59 +10:00
Dave Airlie
e3b2415e28 drm/radeon/kms: implement the bo busy ioctl properly.
The previous patch assumes the ioctl already existed, when
it actually didn't.

It also didn't return the correct error code.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-21 09:51:30 +10:00
Dave Airlie
5ef5f72feb drm/kms: teardown crtc correctly when fb is destroyed.
If userspace destroys a framebuffer that is in use on a crtc,
don't just null it out, tear down the crtc properly so the
hw gets turned off.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-19 14:11:34 +10:00
Dave Airlie
6a719e0533 drm/kms/radeon: cleanup combios TV table like DDX.
The fallback case wasn't getting executed properly if there
was no TV table, which my T42 M7 hasn't got.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-19 14:11:32 +10:00
Dave Airlie
bf8e828b00 drm/radeon/kms: memset the allocated framebuffer before using it.
This gets rid of some ugliness, we shuold probably find a way
for the GPU to zero this.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-19 14:11:32 +10:00
Dave Airlie
80e6914db1 drm/radeon/kms: although LVDS might be possible on crtc 1 don't do it.
LVDS always requests RMX_FULL, we need to fix it so that doesn't happen
before we can enable LVDS on crtc 1.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-19 14:11:26 +10:00
Dave Airlie
cefb87efc9 drm/radeon/kms: implement bo busy check + current domain
This implements the busy ioctl along with a current domain check.
returns 0 or -EBUSY
puts the current domain no matter what the answer.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-17 12:28:56 +10:00
Dave Airlie
de1b28989e drm/radeon/kms: cut down indirects in register accesses.
We really don't want to be doing all these indirects, updating
the GPU gart table is something we do often so the less overhead the
better.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-16 08:36:34 +10:00
Michel Dänzer
7ed220d738 drm/radeon/kms: Fix up vertical blank interrupt support.
Fixes 3D apps timing out in the WAIT_VBLANK ioctl.

AVIVO bits compile-tested only.

Signed-off-by: Michel Dänzer <daenzer@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-16 08:36:19 +10:00
Dave Airlie
3f8befec95 drm/radeon/kms: add rv530 R300_SU_REG_DEST + reloc for ZPASS_ADDR
These are needed for Occulsion Query support.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-16 08:33:17 +10:00
Dave Airlie
ebb177d2af drm/edid: fixup detailed timings like the X server.
this syncs the versioning check with the code the X server uses.

Reported-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-15 12:25:08 +10:00
Jerome Glisse
616b843468 drm/radeon/kms: Add specific rs690 authorized register table
rs690 is r3xx 3D engine with AVIVO modesetting so we need to allow
AVIVO register for vline synchronization. This add a specific table
to rs690 to handle that. Thanks to Marc (marvin24) for debugging
this and kudos to Andre (taiu1) for spotting the origin of the bugs.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-15 12:09:51 +10:00
Frans Pop
6cb504c29b drm/i915: silence vblank warnings
these errors are pretty pointless

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-09 12:25:29 +10:00
Paul Rolland
8d3457ec31 drm: silence pointless vblank warning.
Some applications/hardware combinations are triggering the message "failed to
acquire vblank counter" to be issued up to 20 times a second, which makes it
both useless and dangerous, as this may hide other important messages.
This changes makes it only appear when people are debugging.

Signed-off-by: Paul Rolland <rol@as2917.net>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Lost-twice-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-09 12:24:01 +10:00
Keith Packard
38d5487db7 drm: When adding probed modes, preserve duplicate mode types
The code which takes probed modes and adds them to a connector eliminates
duplicate modes by comparing them using drm_mode_equal. That function
doesn't consider the type bits, which means that any modes which differ only
in the type field will be lost.

One of the bits in the mode->type field is the DRM_MODE_TYPE_PREFERRED bit.
If the mode with that bit is lost, then higher level code will not know
which mode to select, causing a random mode to be used instead.

This patch simply merges the two mode type bits together; that seems
reasonable to me, but perhaps only a subset of the bits should be used? None
of these can be user defined as they all come from looking at just the
hardware.

Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-09 12:22:53 +10:00
Linus Torvalds
b32b8e645e Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: (22 commits)
  drm/i915: Fix read outside array bounds in restoring the SWF10 range.
  drm/i915: Use our own workqueue to avoid wedging the system along with the GPU.
  drm/i915: Add support for dual-channel LVDS on 8xx.
  drm/i915: Return disconnected for SDVO DVI when there's no digital EDID.
  drm/i915: Choose real sdvo output according to result from detection
  drm/i915: Set preferred mode for integrated TV according to TV format
  drm/i915: fix 845G FIFO size & burst length
  drm/i915: fix VGA detect on IGDNG
  drm/i915: Add eDP support on IGDNG mobile chip
  drm/i915: enable DisplayPort support on IGDNG
  drm/i915: Fix channel ending action for DP aux transaction
  drm/i915: fix issue in display pipe setup on IGDNG
  drm/i915: disable VGA plane reliably
  drm/I915: Fix offset to DVO timings in LVDS data
  drm/i915: hdmi detection according by reading edid
  drm/i915: correct self-refresh calculation in "everything off" case
  drm/i915: handle FIFO oversubsription correctly
  drm/i915: FIFO watermark calculation fixes
  drm/i915: ignore lvds on AOpen Mini PC MP-915
  drm/i915: Allow frame buffers up to 4096x4096 on 915/945 class hardware
  ...
2009-08-07 19:03:59 -07:00
Dave Airlie
17332925d7 drm/radeon/kms: setup MC/VRAM the same way for suspend/resume
we should align the GTT after VRAM no matter what, as we can
come back from resume and put in a different place and bad things happen.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-07 20:33:11 +10:00
Jerome Glisse
985fe845ae drm/radeon/kms: Fix caching mode selection for GTT object
GTT object can either be cached,uncached or wc just let core ttm
pick the best mode according to how the bo driver and GTT memory
type was initialized.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-06 15:14:39 +10:00
Roel Kluin
819e006463 drm/i915: Fix read outside array bounds in restoring the SWF10 range.
dev_priv->saveSWF1 is a 16 element array, but this reads up to index 22,
and restored values from the wrong registers.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-08-05 11:21:29 -07:00
Eric Anholt
9c9fe1f841 drm/i915: Use our own workqueue to avoid wedging the system along with the GPU.
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-08-05 11:20:53 -07:00
Alex Deucher
6502fbfaf8 drm/radeon: Add support for RS880 chips
These are new AMD IGP chips

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-05 12:07:09 +10:00
Roel Kluin
c96e7c7a3a drm/ttm: Read buffer overflow
Check whether index is within bounds before grabbing the element.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-04 13:41:05 +10:00
Roel Kluin
fa99239cb7 drm/radeon: Read buffer overflow
Check whether index is within bounds before grabbing the element.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-04 13:41:05 +10:00
Thomas Hellstrom
fee280d3fd drm/ttm: Fix a sync object leak.
If there are multiple simultaneous waiters for the same buffer object,
a temporary reference to its sync object may be leaked.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-04 13:41:05 +10:00
Xiaotian Feng
c9b7fb54f0 drm/radeon/kms: fix memory leak in radeon_driver_load_kms
This patch fixes following kmemleak report:
unreferenced object 0xffff88022cb53000 (size 4096):
  comm "work_for_cpu", pid 97, jiffies 4294672345
  backtrace:
    [<ffffffff810eb222>] create_object+0x19f/0x2a0
    [<ffffffff810eb422>] kmemleak_alloc+0x26/0x4c
    [<ffffffff810e363f>] __kmalloc+0x187/0x1b0
    [<ffffffffa005f3db>] kzalloc.clone.0+0x13/0x15 [radeon]
    [<ffffffffa005f403>] radeon_driver_load_kms+0x26/0xe1 [radeon]
    [<ffffffffa0017432>] drm_get_dev+0x37f/0x480 [drm]
    [<ffffffffa007f424>] radeon_pci_probe+0x15/0x269 [radeon]
    [<ffffffff811f8779>] local_pci_probe+0x17/0x1b
    [<ffffffff8105ffbb>] do_work_for_cpu+0x18/0x2a
    [<ffffffff81063c38>] kthread+0x8a/0x92
    [<ffffffff81012cba>] child_rip+0xa/0x20
    [<ffffffffffffffff>] 0xffffffffffffffff

Signed-off-by: Xiaotian Feng <dfeng@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-04 13:41:05 +10:00
Dave Airlie
de05065ff5 drm/radeon/kms: fix nomodeset.
The ordering was wrong to get the nomodeset parameter to work.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-04 13:41:05 +10:00
Thomas Hellstrom
6d0897ba58 drm/ttm: Fix a potential comparison of structs.
On some architectures the comparison may cause a compilation failure.

Original partial fix Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>

Signed-off-by: Pekka Paalanen <pq@iki.fi>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-04 13:41:04 +10:00
Dave Airlie
0924d94225 drm/radeon/kms: fix rv515 VRAM initialisation.
This got missed in the VRAM init re-workings.

Signed-of-by: Dave Airlie <airlied@redhat.com>
2009-08-04 13:41:04 +10:00
Jakob Bornecrantz
4cb72b1727 drm: Catch stop possible NULL pointer reference
This was caught by Weiss. Also added some comments to the
fb_changed and mode_changed variables to explain what they do.

Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Tested-by: Thomas White <taw@bitwiz.org.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-04 13:29:49 +10:00
Jakob Bornecrantz
7781de7456 drm: Small logic fix in drm_mode_setcrtc
Match the logic to the comments in the debug message

Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-04 13:29:27 +10:00
ling.ma@intel.com
0c2e39525b drm/i915: Add support for dual-channel LVDS on 8xx.
This corresponds to a fix to UMS back in 2007.  Fixes fd.o bug #20115.

Signed-off-by: Ma Ling <ling.ma@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-07-30 10:05:17 -07:00