Commit Graph

42 Commits

Author SHA1 Message Date
Suresh Siddha
cd7240c0b9 x86, tsc, sched: Recompute cyc2ns_offset's during resume from sleep states
TSC's get reset after suspend/resume (even on cpu's with invariant TSC
which runs at a constant rate across ACPI P-, C- and T-states). And in
some systems BIOS seem to reinit TSC to arbitrary large value (still
sync'd across cpu's) during resume.

This leads to a scenario of scheduler rq->clock (sched_clock_cpu()) less
than rq->age_stamp (introduced in 2.6.32). This leads to a big value
returned by scale_rt_power() and the resulting big group power set by the
update_group_power() is causing improper load balancing between busy and
idle cpu's after suspend/resume.

This resulted in multi-threaded workloads (like kernel-compilation) go
slower after suspend/resume cycle on core i5 laptops.

Fix this by recomputing cyc2ns_offset's during resume, so that
sched_clock() continues from the point where it was left off during
suspend.

Reported-by: Florian Pritz <flo@xssn.at>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: <stable@kernel.org> # [v2.6.32+]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1282262618.2675.24.camel@sbsiddha-MOBL3.sc.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-08-20 14:59:02 +02:00
Pavel Machek
a2531293db update email address
pavel@suse.cz no longer works, replace it with working address.

Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-07-19 10:56:54 +02:00
Ondrej Zary
85a0e75397 PM / x86: Save/restore MISC_ENABLE register
Save/restore MISC_ENABLE register on suspend/resume.
This fixes OOPS (invalid opcode) on resume from STR on Asus P4P800-VM,
which wakes up with MWAIT disabled.

Fixes https://bugzilla.kernel.org/show_bug.cgi?id=15385

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-06-08 00:32:49 +02:00
Linus Torvalds
fb1ae63577 Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-tip:
  x86: Fix double enable_IR_x2apic() call on SMP kernel on !SMP boards
  x86: Increase CONFIG_NODES_SHIFT max to 10
  ibft, x86: Change reserve_ibft_region() to find_ibft_region()
  x86, hpet: Fix bug in RTC emulation
  x86, hpet: Erratum workaround for read after write of HPET comparator
  bootmem, x86: Fix 32bit numa system without RAM on node 0
  nobootmem, x86: Fix 32bit numa system without RAM on node 0
  x86: Handle overlapping mptables
  x86: Make e820_remove_range to handle all covered case
  x86-32, resume: do a global tlb flush in S4 resume
2010-04-07 11:02:23 -07:00
Shaohua Li
8ae06d223f x86-32, resume: do a global tlb flush in S4 resume
Colin King reported a strange oops in S4 resume code path (see below). The test
system has i5/i7 CPU. The kernel doesn't open PAE, so 4M page table is used.
The oops always happen a virtual address 0xc03ff000, which is mapped to the
last 4k of first 4M memory. Doing a global tlb flush fixes the issue.

EIP: 0060:[<c0493a01>] EFLAGS: 00010086 CPU: 0
EIP is at copy_loop+0xe/0x15
EAX: 36aeb000 EBX: 00000000 ECX: 00000400 EDX: f55ad46c
ESI: 0f800000 EDI: c03ff000 EBP: f67fbec4 ESP: f67fbea8
DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
...
...
CR2: 00000000c03ff000

Tested-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
LKML-Reference: <20100305005932.GA22675@sli10-desk.sh.intel.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: <stable@kernel.org>
2010-03-30 11:46:02 -07:00
Tejun Heo
5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Frederic Weisbecker
24f1e32c60 hw-breakpoints: Rewrite the hw-breakpoints layer on top of perf events
This patch rebase the implementation of the breakpoints API on top of
perf events instances.

Each breakpoints are now perf events that handle the
register scheduling, thread/cpu attachment, etc..

The new layering is now made as follows:

       ptrace       kgdb      ftrace   perf syscall
          \          |          /         /
           \         |         /         /
                                        /
            Core breakpoint API        /
                                      /
                     |               /
                     |              /

              Breakpoints perf events

                     |
                     |

               Breakpoints PMU ---- Debug Register constraints handling
                                    (Part of core breakpoint API)
                     |
                     |

             Hardware debug registers

Reasons of this rewrite:

- Use the centralized/optimized pmu registers scheduling,
  implying an easier arch integration
- More powerful register handling: perf attributes (pinned/flexible
  events, exclusive/non-exclusive, tunable period, etc...)

Impact:

- New perf ABI: the hardware breakpoints counters
- Ptrace breakpoints setting remains tricky and still needs some per
  thread breakpoints references.

Todo (in the order):

- Support breakpoints perf counter events for perf tools (ie: implement
  perf_bpcounter_event())
- Support from perf tools

Changes in v2:

- Follow the perf "event " rename
- The ptrace regression have been fixed (ptrace breakpoint perf events
  weren't released when a task ended)
- Drop the struct hw_breakpoint and store generic fields in
  perf_event_attr.
- Separate core and arch specific headers, drop
  asm-generic/hw_breakpoint.h and create linux/hw_breakpoint.h
- Use new generic len/type for breakpoint
- Handle off case: when breakpoints api is not supported by an arch

Changes in v3:

- Fix broken CONFIG_KVM, we need to propagate the breakpoint api
  changes to kvm when we exit the guest and restore the bp registers
  to the host.

Changes in v4:

- Drop the hw_breakpoint_restore() stub as it is only used by KVM
- EXPORT_SYMBOL_GPL hw_breakpoint_restore() as KVM can be built as a
  module
- Restore the breakpoints unconditionally on kvm guest exit:
  TIF_DEBUG_THREAD doesn't anymore cover every cases of running
  breakpoints and vcpu->arch.switch_db_regs might not always be
  set when the guest used debug registers.
  (Waiting for a reliable optimization)

Changes in v5:

- Split-up the asm-generic/hw-breakpoint.h moving to
  linux/hw_breakpoint.h into a separate patch
- Optimize the breakpoints restoring while switching from kvm guest
  to host. We only want to restore the state if we have active
  breakpoints to the host, otherwise we don't care about messed-up
  address registers.
- Add asm/hw_breakpoint.h to Kbuild
- Fix bad breakpoint type in trace_selftest.c

Changes in v6:

- Fix wrong header inclusion in trace.h (triggered a build
  error with CONFIG_FTRACE_SELFTEST

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jan Kiszka <jan.kiszka@web.de>
Cc: Jiri Slaby <jirislaby@gmail.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Paul Mundt <lethal@linux-sh.org>
2009-11-08 15:34:42 +01:00
Frederic Weisbecker
0f8f86c7bd Merge commit 'perf/core' into perf/hw-breakpoint
Conflicts:
	kernel/Makefile
	kernel/trace/Makefile
	kernel/trace/trace.h
	samples/Makefile

Merge reason: We need to be uptodate with the perf events development
branch because we plan to rewrite the breakpoints API on top of
perf events.
2009-10-18 01:12:33 +02:00
Andi Kleen
bc3eb7076b x86: Remove final bits of CONFIG_X86_OLD_MCE
Caught by Linus.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Borislav Petkov <borislav.petkov@amd.com>
[ fixed up context conflict manually. ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-18 08:31:23 +02:00
Ingo Molnar
a1922ed661 Merge branch 'tracing/core' into tracing/hw-breakpoints
Conflicts:
	arch/Kconfig
	kernel/trace/trace.h

Merge reason: resolve the conflicts, plus adopt to the new
              ring-buffer APIs.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-07 08:19:51 +02:00
H. Peter Anvin
b855192c08 Merge branch 'x86/urgent' into x86/pat
Reason: Change to is_new_memtype_allowed() in x86/urgent

Resolved semantic conflicts in:

	 arch/x86/mm/pat.c
	 arch/x86/mm/ioremap.c

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-08-26 17:24:28 -07:00
Suresh Siddha
d0af9eed5a x86, pat/mtrr: Rendezvous all the cpus for MTRR/PAT init
SDM Vol 3a section titled "MTRR considerations in MP systems" specifies
the need for synchronizing the logical cpu's while initializing/updating
MTRR.

Currently Linux kernel does the synchronization of all cpu's only when
a single MTRR register is programmed/updated. During an AP online
(during boot/cpu-online/resume)  where we initialize all the MTRR/PAT registers,
we don't follow this synchronization algorithm.

This can lead to scenarios where during a dynamic cpu online, that logical cpu
is initializing MTRR/PAT with cache disabled (cr0.cd=1) etc while other logical
HT sibling continue to run (also with cache disabled because of cr0.cd=1
on its sibling).

Starting from Westmere, VMX transitions with cr0.cd=1 don't work properly
(because of some VMX performance optimizations) and the above scenario
(with one logical cpu doing VMX activity and another logical cpu coming online)
can result in system crash.

Fix the MTRR initialization by doing rendezvous of all the cpus. During
boot and resume, we delay the MTRR/PAT init for APs till all the
logical cpu's come online and the rendezvous process at the end of AP's bringup,
will initialize the MTRR/PAT for all AP's.

For dynamic single cpu online, we synchronize all the logical cpus and
do the MTRR/PAT init on the AP that is coming online.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-08-21 16:25:55 -07:00
Peter Chubb
00024be968 x86: Fix resume from suspend when CONFIG_CC_STACKPROTECTOR
Patch 08687aec71bc9134fe336e561f6did877bacf74fc0a (x86: unify
power/cpu_(32|64).c)  renamed cpu_32.c to cpu.c, but did not update
the special compilation flags for the file for the new name.

This patch fixes the compilation flags, and therefore fixes resume
from suspend on my Acer Aspire One.

[rjw: The regression from 2.6.30 fixed by this patch is tracked as
 http://bugzilla.kernel.org/show_bug.cgi?id=13661]

Signed-off-by: Peter Chubb <peterc@nicta.com.au>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2009-07-08 13:20:13 +02:00
Hidetoshi Seto
7262b6e4a4 x86, mce: Fix mce resume on 32bit
Calling mcheck_init() on resume is required only with
CONFIG_X86_OLD_MCE=y.

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Acked-by: Andi Kleen <andi@firstfloor.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-06-23 13:36:17 -07:00
Ingo Molnar
eadb8a091b Merge branch 'linus' into tracing/hw-breakpoints
Conflicts:
	arch/x86/Kconfig
	arch/x86/kernel/traps.c
	arch/x86/power/cpu.c
	arch/x86/power/cpu_32.c
	kernel/Makefile

Semantic conflict:
	arch/x86/kernel/hw_breakpoint.c

Merge reason: Resolve the conflicts, move from put_cpu_no_sched() to
              put_cpu() in arch/x86/kernel/hw_breakpoint.c.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-17 12:56:49 +02:00
Sergio Luis
08687aec71 x86: unify power/cpu_(32|64).c
This is the last unification step. Here we do remove one of the files
and rename the left one as cpu.c, as both are now the same.
Also update power/Makefile, telling it to build cpu.o, instead of
cpu_(32|64).o

Signed-off-by: Sergio Luis <sergio@larces.uece.br>
Signed-off-by: Lauro Salmito <laurosalmito@gmail.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2009-06-12 21:32:31 +02:00
Sergio Luis
6d48becd33 x86: unify power/cpu_(32|64) copyright notes
In this step, we do unify the copyright notes for both files
cpu_32.c and cpu_64.c, making such files exactly the same.
It's the last step before the actual unification, that will
rename one of them to cpu.c and remove the other one.

Signed-off-by: Sergio Luis <sergio@larces.uece.br>
Signed-off-by: Lauro Salmito <laurosalmito@gmail.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2009-06-12 21:32:30 +02:00
Sergio Luis
3134d04b77 x86: unify power/cpu_(32|64) regarding restoring processor state
In this step we do unify cpu_32.c and cpu_64.c functions that
work on restoring the saved processor state. Also, we do
eliminate the forward declaration of fix_processor_context()
for X86_64, as it's not needed anymore.

Signed-off-by: Sergio Luis <sergio@larces.uece.br>
Signed-off-by: Lauro Salmito <laurosalmito@gmail.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2009-06-12 21:32:30 +02:00
Sergio Luis
f9ebbe53e7 x86: unify power/cpu_(32|64) regarding saving processor state
In this step we do unify cpu_32.c and cpu_64.c functions that
work on saving the processor state.

Signed-off-by: Sergio Luis <sergio@larces.uece.br>
Signed-off-by: Lauro Salmito <laurosalmito@gmail.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2009-06-12 21:32:30 +02:00
Sergio Luis
833b2ca079 x86: unify power/cpu_(32|64) global variables
Aiming total unification of cpu_32.c and cpu_64.c, in this step
we do unify the global variables and existing forward declarations
for such files.

Signed-off-by: Sergio Luis <sergio@larces.uece.br>
Signed-off-by: Lauro Salmito <laurosalmito@gmail.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2009-06-12 21:32:30 +02:00
Sergio Luis
f6783d20d4 x86: unify power/cpu_(32|64) headers
First step towards the unification of cpu_32.c and cpu_64.c.
This commit unifies the headers of such files, making both
of them use the same header files. It also remove the uneeded
<module.h>.

Signed-off-by: Sergio Luis <sergio@larces.uece.br>
Signed-off-by: Lauro Salmito <laurosalmito@gmail.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2009-06-12 21:32:29 +02:00
K.Prasad
1e3500666f hw-breakpoints: use wrapper routines around debug registers in processor related functions
This patch enables the use of wrapper routines to access the debug/breakpoint
registers on cpu management.

The hardcoded debug registers save and restore operations for threads
breakpoints are replaced by wrappers.

And now that we handle the kernel breakpoints too, we also need to handle them
on cpu hotplug operations.

[ Impact: adapt new hardware breakpoint api to cpu hotplug ]

Original-patch-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: K.Prasad <prasad@linux.vnet.ibm.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-06-02 22:46:59 +02:00
K.Prasad
b332828c39 hw-breakpoints: prepare the code for Hardware Breakpoint interfaces
The generic hardware breakpoint interface provides an abstraction of
hardware breakpoints in front of specific arch implementations for both kernel
and user side breakpoints.
This includes execution breakpoints and read/write breakpoints, also known as
"watchpoints".

This patch introduces header files containing constants, structure definitions
and declaration of functions used by the hardware breakpoint core and x86
specific code.
It also introduces an array based storage for the debug-register values in
'struct thread_struct', while modifying all users of debugreg<n> member in the
structure.

[ Impact: add headers for new hardware breakpoint interface ]

Original-patch-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: K.Prasad <prasad@linux.vnet.ibm.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-06-02 22:46:57 +02:00
Joseph Cihula
9b7b89efa3 x86: disable stack-protector for __restore_processor_state()
The __restore_processor_state() fn restores %gs on resume from S3.  As
such, it cannot be protected by the stack-protector guard since %gs will
not be correct on function entry.

There are only a few other fns in this file and it should not negatively
impact kernel security that they will also have the stack-protector
guard removed (and so it's not worth moving them to another file).

Without this change, S3 resume on a kernel built with
CONFIG_CC_STACKPROTECTOR_ALL=y will fail.

Signed-off-by: Joseph Cihula <joseph.cihula@intel.com>
Tested-by: Chris Wright <chrisw@sous-sol.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Tejun Heo <tj@kernel.org>
LKML-Reference: <49D13385.5060900@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-03 19:48:41 +02:00
Magnus Damm
a8af78982f pm: rework includes, remove arch ifdefs
Make the following header file changes:

 - remove arch ifdefs and asm/suspend.h from linux/suspend.h
 - add asm/suspend.h to disk.c (for arch_prepare_suspend())
 - add linux/io.h to swsusp.c (for ioremap())
 - x86 32/64 bit compile fixes

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Cc: Paul Mundt <lethal@linux-sh.org>
Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01 08:59:16 -07:00
Jeremy Fitzhardinge
0341c14da4 x86: use _types.h headers in asm where available
In general, the only definitions that assembly files can use
are in _types.S headers (where available), so convert them.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-02-13 11:35:01 -08:00
Rafael J. Wysocki
97a70e548b x86, hibernate: fix breakage on x86_32 with CONFIG_NUMA set
Impact: fix crash during hibernation on 32-bit NUMA

The NUMA code on x86_32 creates special memory mapping that allows
each node's pgdat to be located in this node's memory.  For this
purpose it allocates a memory area at the end of each node's memory
and maps this area so that it is accessible with virtual addresses
belonging to low memory.  As a result, if there is high memory,
these NUMA-allocated areas are physically located in high memory,
although they are mapped to low memory addresses.

Our hibernation code does not take that into account and for this
reason hibernation fails on all x86_32 systems with CONFIG_NUMA=y and
with high memory present.  Fix this by adding a special mapping for
the NUMA-allocated memory areas to the temporary page tables created
during the last phase of resume.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-12 23:28:51 +01:00
Ingo Molnar
0afe2db213 Merge branch 'x86/unify-cpu-detect' into x86-v28-for-linus-phase4-D
Conflicts:
	arch/x86/kernel/cpu/common.c
	arch/x86/kernel/signal_64.c
	include/asm-x86/cpufeature.h
2008-10-11 20:23:20 +02:00
H. Peter Anvin
fe47784ba5 Merge branch 'x86/cpu' into x86/xsave
Conflicts:

	arch/x86/kernel/cpu/feature_names.c
	include/asm-x86/cpufeature.h
2008-09-04 09:04:45 -07:00
Suresh Siddha
83b8e28b14 x86: xsave: restore xcr0 during resume
Add the missing XCR0(XFEATURE_ENABLED_MASK) restore during resume.

Reported-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-08-27 15:23:23 -07:00
Uros Bizjak
c171f465b7 x86, cleanup: use X86_CR4_PGE in x86/power/hibernate_asm_32.S
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-20 11:52:47 +02:00
David Fries
e532c06f2a x86: fix i486 suspend to disk CR4 oops
arch/x86/power/cpu_32.c __save_processor_state calls read_cr4()
only a i486 CPU doesn't have the CR4 register.  Trying to read it
produces an invalid opcode oops during suspend to disk.

Use the safe rc4 reading op instead. If the value to be written is
zero the write is skipped.

arch/x86/power/hibernate_asm_32.S
done: swapped the use of %eax and %ecx to use jecxz for
the zero test and jump over store to %cr4.
restore_image: s/%ecx/%eax/ to be consistent with done:

In addition to __save_processor_state, acpi_save_state_mem,
efi_call_phys_prelog, and efi_call_phys_epilog had checks added
(acpi restore was in assembly and already had a check for
non-zero).  There were other reads and writes of CR4, but MCE and
virtualization shouldn't be executed on a i486 anyway.

Signed-off-by: David Fries <david@fries.net>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-18 08:50:19 +02:00
Yinghai Lu
c987d12f84 x86: remove end_pfn in 64bit
and use max_pfn directly.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 13:10:38 +02:00
Paolo Ciarrocchi
db96598494 x86: coding style fixes to arch/x86/power/cpu_32.c
Before:
   total: 15 errors, 3 warnings, 133 lines checked
After:
   total: 0 errors, 0 warnings, 138 lines checked

No code changed:

arch/x86/power/cpu_32.o:

   text	   data	    bss	    dec	    hex	filename
    739	      0	     84	    823	    337	cpu_32.o.before
    739	      0	     84	    823	    337	cpu_32.o.after

md5:
   eb0726223a5e26b195e65f0ae2c0ec66  cpu_32.o.before.asm
   eb0726223a5e26b195e65f0ae2c0ec66  cpu_32.o.after.asm

Signed-off-by: Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17 17:40:50 +02:00
Cyrill Gorcunov
bbb1e57a1c x86 cleanup: suspend_asm_64.S - use X86_CR4_PGE instead of numeric value
By including <asm/processor-flags.h> we're allowed to use
X86_CR4_PGE instead of numeric constant.

md5 sums of compiled files are differ due to this inclusion
but .text section remains the same.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-19 16:18:33 +01:00
Rafael J. Wysocki
261f0ce5cc x86 PM: update stale comments
In some suspend and hibernation files in arch/x86/power there are
comments referring to arch/x86-64 and arch/i386 .  Update them to
reflect the current code layout.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-09 23:24:09 +01:00
Rafael J. Wysocki
ef8b03fabf x86 PM: consolidate suspend and hibernation code
Move the hibernation-specific code from arch/x86/power/suspend_64.c
to a separate file (hibernate_64.c) and the CPU-handling code to
cpu_64.c (in line with the corresponding 32-bit code).

Simplify arch/x86/power/Makefile .

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-09 23:24:09 +01:00
Rafael J. Wysocki
c57591244a x86 PM: rename 32-bit files in arch/x86/power
Rename cpu.c, suspend.c and swsusp.S in arch/x86/power to cpu_32.c,
hibernate_32.c and hibernate_asm_32.S, respectively, and update the
purpose and copyright information in these files.

Update the Makefile in arch/x86/power to reflect the above changes.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-09 23:24:09 +01:00
Rafael J. Wysocki
cf7700fe24 x86 PM: move 64-bit hibernation files to arch/x86/power
Move arch/x86/kernel/suspend_64.c to arch/x86/power .

Move arch/x86/kernel/suspend_asm_64.S to arch/x86/power
as hibernate_asm_64.S .

Update purpose and copyright information in
arch/x86/power/suspend_64.c and
arch/x86/power/hibernate_asm_64.S .

Update the Makefiles in arch/x86, arch/x86/kernel and
arch/x86/power to reflect the above changes.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-09 23:24:09 +01:00
Jan Beulich
cae4595764 x86: make __{save,restore}_processor_state static
.. allowing to remove their declarations from a global include file
(the symbols don't exist for anything but x86).

Likewise for 64-bits' fix_processor_context(), just that that one was
properly declared in an arch-specific header.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:23 +01:00
Roland McGrath
0f5340933f x86: x86-32 thread_struct.debugreg
This replaces the debugreg[7] member of thread_struct with individual
members debugreg0, etc.  This saves two words for the dummies 4 and 5,
and harmonizes the code between 32 and 64.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:30:59 +01:00
Thomas Gleixner
4b60eb8380 i386: move power
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-11 11:16:34 +02:00