Commit Graph

572 Commits

Author SHA1 Message Date
Rene Herman
debe621468 lib/iomap.c:bad_io_access(): print 0x hex prefix
Be explicit about printing hex.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:57 -07:00
Peter Lund
430d275a39 avoid negative (and full-width) shifts in radix-tree.c
Negative shifts are not allowed in C (the result is undefined).  Same thing
with full-width shifts.

It works on most platforms but not on the VAX with gcc 4.0.1 (it results in an
"operand reserved" fault).

Shifting by more than the width of the value on the left is also not
allowed.  I think the extra '>> 1' tacked on at the end in the original
code was an attempt to work around that.  Getting rid of that is an extra
feature of this patch.

Here's the chapter and verse, taken from the final draft of the C99
standard ("6.5.7 Bitwise shift operators", paragraph 3):

  "The integer promotions are performed on each of the operands. The
  type of the result is that of the promoted left operand. If the
  value of the right operand is negative or is greater than or equal
  to the width of the promoted left operand, the behavior is
  undefined."

Thank you to Jan-Benedict Glaw, Christoph Hellwig, Maciej Rozycki, Pekka
Enberg, Andreas Schwab, and Christoph Lameter for review.  Special thanks
to Andreas for spotting that my fix only removed half the undefined
behaviour.

Signed-off-by: Peter Lund <firefly@vax64.dk>
Christoph Lameter <clameter@sgi.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: "Maciej W. Rozycki" <macro@linux-mips.org>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Andreas Schwab <schwab@suse.de>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: WU Fengguang <wfg@mail.ustc.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:56 -07:00
Jan Beulich
004429956b handle recursive calls to bust_spinlocks()
Various architectures may call bust_spinlocks() recursively; the function
itself, however, doesn't appear to be meant to be called in this manner.
Nevertheless, this doesn't appear to be a problem as long as
bust_spinlocks(0) doesn't get called twice in a row (otherwise,
unblank_screen() may enter the scheduler).  However, at least on i386 die()
has been capable of returning (and on other architectures this should
really be that way, too) when notify_die() returns NOTIFY_STOP.

Short of getting a reply to a respective query, this patch makes
bust_spinlocks() increment/decrement oops_in_progress, and wake klogd only
when the count drops back to zero.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:56 -07:00
Subbaiah Venkata
995e4286a0 lib/sort.c optimization
Hello, I fixed and tested a small bug in lib/sort.c file, heap sort
function.

The fix avoids unnecessary swap of contents when i is 0 (saves few loads
and stores), which happens every time sort function is called.  I felt the
fix is worth bringing it to your attention given the importance and
frequent use of the sort function.

Acked-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:52 -07:00
Adrian Bunk
53fa664525 lib/ioremap.c should #include <linux/io.h>
Every file should include the headers containing the prototypes for its global
functions (in this case ioremap_page_range()).

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:50 -07:00
Neil Horman
8e2b705649 argv_split: allow argv_split to handle NULL pointer in argcp parameter gracefully
It would be nice if the argv_split library function could gracefully handle
a NULL pointer in the argcp parameter, so as to allow functions using it
that did not care about the value of argc to not have to declare a useless
variable.  This patch accomplishes that.  Tested by me, with successful
results.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Satyam Sharma <satyam@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:50 -07:00
Christoph Lameter
4ba9b9d0ba Slab API: remove useless ctor parameter and reorder parameters
Slab constructors currently have a flags parameter that is never used.  And
the order of the arguments is opposite to other slab functions.  The object
pointer is placed before the kmem_cache pointer.

Convert

        ctor(void *object, struct kmem_cache *s, unsigned long flags)

to

        ctor(struct kmem_cache *s, void *object)

throughout the kernel

[akpm@linux-foundation.org: coupla fixes]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:45 -07:00
Peter Zijlstra
145ca25eb2 lib: floating proportions
Given a set of objects, floating proportions aims to efficiently give the
proportional 'activity' of a single item as compared to the whole set. Where
'activity' is a measure of a temporal property of the items.

It is efficient in that it need not inspect any other items of the set
in order to provide the answer. It is not even needed to know how many
other items there are.

It has one parameter, and that is the period of 'time' over which the
'activity' is measured.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:45 -07:00
Peter Zijlstra
dc62a30e27 lib: percpu_counter_init_irq
provide a way to tell lockdep about percpu_counters that are supposed to be
used from irq safe contexts.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:44 -07:00
Peter Zijlstra
833f4077bf lib: percpu_counter_init error handling
alloc_percpu can fail, propagate that error.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:44 -07:00
Peter Zijlstra
bf1d89c813 lib: percpu_count_sum()
Provide an accurate version of percpu_counter_read.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:44 -07:00
Peter Zijlstra
52d9f3b409 lib: percpu_counter_sum_positive
s/percpu_counter_sum/&_positive/

Because its consitent with percpu_counter_read*

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:44 -07:00
Peter Zijlstra
3a587f47b8 lib: percpu_counter_set
Provide a method to set a percpu counter to a specified value.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:44 -07:00
Peter Zijlstra
20e8976709 lib: make percpu_counter_add take s64
percpu_counter is a s64 counter, make _add consitent.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:44 -07:00
Peter Zijlstra
252e0ba6b7 lib: percpu_counter variable batch
Because the current batch setup has an quadric error bound on the counter,
allow for an alternative setup.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:44 -07:00
Peter Zijlstra
aa0dff2d09 lib: percpu_counter_add
s/percpu_counter_mod/percpu_counter_add/

Because its a better name, _mod implies modulo.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:44 -07:00
FUJITA Tomonori
9e91fdb32d swiotlb: fix map_sg failure handling
sg list elements might not be continuous.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-17 10:06:18 +02:00
Linus Torvalds
92d15c2ccb Merge branch 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-block: (63 commits)
  Fix memory leak in dm-crypt
  SPARC64: sg chaining support
  SPARC: sg chaining support
  PPC: sg chaining support
  PS3: sg chaining support
  IA64: sg chaining support
  x86-64: enable sg chaining
  x86-64: update pci-gart iommu to sg helpers
  x86-64: update nommu to sg helpers
  x86-64: update calgary iommu to sg helpers
  swiotlb: sg chaining support
  i386: enable sg chaining
  i386 dma_map_sg: convert to using sg helpers
  mmc: need to zero sglist on init
  Panic in blk_rq_map_sg() from CCISS driver
  remove sglist_len
  remove blk_queue_max_phys_segments in libata
  revert sg segment size ifdefs
  Fixup u14-34f ENABLE_SG_CHAINING
  qla1280: enable use_sg_chaining option
  ...
2007-10-16 10:09:16 -07:00
Mel Gorman
e12ba74d8f Group short-lived and reclaimable kernel allocations
This patch marks a number of allocations that are either short-lived such as
network buffers or are reclaimable such as inode allocations.  When something
like updatedb is called, long-lived and unmovable kernel allocations tend to
be spread throughout the address space which increases fragmentation.

This patch groups these allocations together as much as possible by adding a
new MIGRATE_TYPE.  The MIGRATE_RECLAIMABLE type is for allocations that can be
reclaimed on demand, but not moved.  i.e.  they can be migrated by deleting
them and re-reading the information from elsewhere.

Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:43:00 -07:00
Jeff Moyer
26fb1589cb fix the max path calculation in radix-tree.c
A while back, Nick Piggin introduced a patch to reduce the node memory
usage for small files (commit cfd9b7df4a):

-#define RADIX_TREE_MAP_SHIFT	6
+#define RADIX_TREE_MAP_SHIFT	(CONFIG_BASE_SMALL ? 4 : 6)

Unfortunately, he didn't take into account the fact that the
calculation of the maximum path was based on an assumption of having
to round up:

#define RADIX_TREE_MAX_PATH (RADIX_TREE_INDEX_BITS/RADIX_TREE_MAP_SHIFT + 2)

So, if CONFIG_BASE_SMALL is set, you will end up with a
RADIX_TREE_MAX_PATH that is one greater than necessary.  The practical
upshot of this is just a bit of wasted memory (one long in the
height_to_maxindex array, an extra pre-allocated radix tree node per
cpu, and extra stack usage in a couple of functions), but it seems
worth getting right.

It's also worth noting that I never build with CONFIG_BASE_SMALL.
What I did to test this was duplicate the code in a small user-space
program and check the results of the calculations for max path and the
contents of the height_to_maxindex array.

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Acked-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:42:54 -07:00
Nick Piggin
c0bc9875b7 radix-tree: use indirect bit
Rather than sign direct radix-tree pointers with a special bit, sign the
indirect one that hangs off the root.  This means that, given a lookup_slot
operation, the invalid result will be differentiated from the valid
(previously, valid results could have the bit either set or clear).

This does not affect slot lookups which occur under lock -- they can never
return an invalid result.  Is needed in future for lockless pagecache.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:42:53 -07:00
Fengguang Wu
6df8ba4f8a radixtree: introduce radix_tree_next_hole()
Introduce radix_tree_next_hole(root, index, max_scan) to scan radix tree for
the first hole.  It will be used in interleaved readahead.

The implementation is dumb and obviously correct.  It can help debug(and
document) the possible smart one in future.

Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:42:52 -07:00
Randy Dunlap
bfe8df3d31 slow down printk during boot
Optionally add a boot delay after each kernel printk() call, crudely
measured in milliseconds, with a maximum delay of 10 seconds per printk.

Enable CONFIG_BOOT_PRINTK_DELAY=y and then add (e.g.):
"lpj=loops_per_jiffy boot_delay=100"
to the kernel command line.

It has been useful in cases like "during boot, my machine just reboots or the
screen goes black" by slowing down printk, (and adding initcall_debug), we can
usually see the last thing that happened before the lights went out which is
usually a valuable clue.

[akpm@linux-foundation.org: not all architectures implement CONFIG_HZ]
[akpm@linux-foundation.org: fix lots of stuff]
[bunk@stusta.de: kernel/printk.c: make 2 variables static]
[heiko.carstens@de.ibm.com: fix slow down printk on boot compile error]
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:42:49 -07:00
Jens Axboe
dbfd49fe9d swiotlb: sg chaining support
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16 11:26:01 +02:00
Al Viro
5ba253313d more low-hanging fruits - kernel, fs, lib signedness
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-14 12:41:52 -07:00
Linus Torvalds
6a84258e5f Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (37 commits)
  PCI: merge almost all of pci_32.h and pci_64.h together
  PCI: X86: Introduce and enable PCI domain support
  PCI: Add 'nodomains' boot option, and pci_domains_supported global
  PCI: modify PCI bridge control ISA flag for clarity
  PCI: use _CRS for PCI resource allocation
  PCI: avoid P2P prefetch window for expansion ROMs
  PCI: skip ISA ioresource alignment on some systems
  PCI: remove transparent bridge sizing
  pci: write file size to inode on proc bus file write
  pci: use size stored in proc_dir_entry for proc bus files
  pci: implement "pci=noaer"
  PCI: fix IDE legacy mode resources
  MSI: Use correct data offset for 32-bit MSI in read_msi_msg()
  PCI: Fix incorrect argument order to list_add_tail() in PCI dynamic ID code
  PCI: i386: Compaq EVO N800c needs PCI bus renumbering
  PCI: Remove no longer correct documentation regarding MSI vector assignment
  PCI: re-enable onboard sound on "MSI K8T Neo2-FIR"
  PCI: quirk_vt82c586_acpi: Omit reading PCI revision ID
  PCI: quirk amd_8131_mmrbc: Omit reading pci revision ID
  cpqphp: Use PCI_CLASS_REVISION instead of PCI_REVISION_ID for read
  ...
2007-10-12 15:50:23 -07:00
David Brownell
aa24886e37 dma_free_coherent() needs irqs enabled (sigh)
On at least ARM (and I'm told MIPS too) dma_free_coherent() has a newish
call context requirement: unlike its dma_alloc_coherent() sibling, it may
not be called with IRQs disabled.  (This was new behavior on ARM as of late
2005, caused by ARM SMP updates.) This little surprise can be annoyingly
driver-visible.

Since it looks like that restriction won't be removed, this patch changes
the definition of the API to include that requirement.  Also, to help catch
nonportable drivers, it updates the x86 and swiotlb versions to include the
relevant warnings.  (I already observed that it trips on the
bus_reset_tasklet of the new firewire_ohci driver.)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: David Miller <davem@davemloft.net>
Acked-by: Russell King <rmk@arm.linux.org.uk>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 15:03:15 -07:00
Greg Kroah-Hartman
f0e7e1bd77 kobject: update the copyrights
I've been hacking on these files for a while now, might as well make it
official...

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 14:51:12 -07:00
Greg Kroah-Hartman
e4bc16621d driver core: remove subsystem_init()
There is only one user of it, and it is only a wrapper for kset_init().

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 14:51:11 -07:00
Tejun Heo
a4e8b91254 sysfs: move sysfs file poll implementation to sysfs_open_dirent
Sysfs file poll implementation is scattered over sysfs and kobject.
Event numbering is done in sysfs_dirent but wait itself is done on
kobject.  This not only unecessarily bloats both kobject and
sysfs_dirent but is also buggy - if a sysfs_dirent is removed while
there still are pollers, the associaton betwen the kobject and
sysfs_dirent breaks and kobject may be freed with the pollers still
sleeping on it.

This patch moves whole poll implementation into sysfs_open_dirent.
Each time a sysfs_open_dirent is created, event number restarts from 1
and pollers sleep on sysfs_open_dirent.  As event sequence number is
meaningless without any open file and pollers should have open file
and thus sysfs_open_dirent, this ephemeral event counting works and is
a saner implementation.

This patch fixes the dnagling sleepers bug and reduces the sizes of
kobject and sysfs_dirent by one pointer.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 14:51:11 -07:00
Kay Sievers
ccd490a3c3 Driver core: kerneldoc - kobject_uevent_env is not "usually KOBJ_MOVE"
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 14:51:06 -07:00
Kay Sievers
5c5daf657c Driver core: exclude kobject_uevent.c for !CONFIG_HOTPLUG
Move uevent specific logic from the core into kobject_uevent.c, which
does no longer require to link the unused string array if hotplug
is not compiled in.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 14:51:06 -07:00
Eric W. Biederman
90bc61359d sysfs: Remove first pass at shadow directory support
While shadow directories appear to be a good idea, the current scheme
of controlling their creation and destruction outside of sysfs appears
to be a locking and maintenance nightmare in the face of sysfs
directories dynamically coming and going.  Which can now occur for
directories containing network devices when CONFIG_SYSFS_DEPRECATED is
not set.

This patch removes everything from the initial shadow directory support
that allowed the shadow directory creation to be controlled at a higher
level.  So except for a few bits of sysfs_rename_dir everything from
commit b592fcfe7f is now gone.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 14:51:03 -07:00
Greg Kroah-Hartman
ce2c9cb025 kobject: remove the static array for the name
Due to historical reasons, struct kobject contained a static array for
the name, and a dynamic pointer in case the name got bigger than the
array.  That's just dumb, as people didn't always know which variable to
reference, even with the accessor for the kobject name.

This patch removes the static array, potentially saving a lot of memory
as the majority of kobjects do not have a very long name.

Thanks to Kay for the idea to do this.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 14:51:02 -07:00
Greg Kroah-Hartman
1ef4cfac01 Driver core: remove subsys_get()
There are no more subsystems, it's a kset now so remove the function and
the only two users, which are in the driver core.


Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 14:51:01 -07:00
Greg Kroah-Hartman
6e9d930d16 Driver core: remove subsys_put()
There are no more subsystems, it's a kset now so remove the function and
the only two users, which are in the driver core.


Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 14:51:01 -07:00
Kay Sievers
6a8d8abb6e Driver core: add CONFIG_UEVENT_HELPER_PATH
The kernel creates a process for every event that is send, even when
there is no binary it could execute.  We are needlessly creating around
200-300 failing processes during early bootup, until we have the chance
to disable it from userspace.

This change allows us to disable /sbin/hotplug entirely, if you want to,
by setting UEVENT_HELPER_PATH="" in the kernel config.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 14:51:01 -07:00
Kay Sievers
7eff2e7a8b Driver core: change add_uevent_var to use a struct
This changes the uevent buffer functions to use a struct instead of a
long list of parameters. It does no longer require the caller to do the
proper buffer termination and size accounting, which is currently wrong
in some places. It fixes a known bug where parts of the uevent
environment are overwritten because of wrong index calculations.

Many thanks to Mathieu Desnoyers for finding bugs and improving the
error handling.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 14:51:01 -07:00
David S. Miller
d4faaecbcc [ZLIB]: Fix external builds of zlib_inflate code.
Move zlib_inflate_blob() out into it's own source file,
infutil.c, so that things like the powerpc zImage builder
in arch/powerpc/boot/Makefile don't end up trying to
compile it.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-11 22:17:20 -07:00
Linus Torvalds
e86908614f Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (408 commits)
  [POWERPC] Add memchr() to the bootwrapper
  [POWERPC] Implement logging of unhandled signals
  [POWERPC] Add legacy serial support for OPB with flattened device tree
  [POWERPC] Use 1TB segments
  [POWERPC] XilinxFB: Allow fixed framebuffer base address
  [POWERPC] XilinxFB: Add support for custom screen resolution
  [POWERPC] XilinxFB: Use pdata to pass around framebuffer parameters
  [POWERPC] PCI: Add 64-bit physical address support to setup_indirect_pci
  [POWERPC] 4xx: Kilauea defconfig file
  [POWERPC] 4xx: Kilauea DTS
  [POWERPC] 4xx: Add AMCC Kilauea eval board support to platforms/40x
  [POWERPC] 4xx: Add AMCC 405EX support to cputable.c
  [POWERPC] Adjust TASK_SIZE on ppc32 systems to 3GB that are capable
  [POWERPC] Use PAGE_OFFSET to tell if an address is user/kernel in SW TLB handlers
  [POWERPC] 85xx: Enable FP emulation in MPC8560 ADS defconfig
  [POWERPC] 85xx: Killed <asm/mpc85xx.h>
  [POWERPC] 85xx: Add cpm nodes for 8541/8555 CDS
  [POWERPC] 85xx: Convert mpc8560ads to the new CPM binding.
  [POWERPC] mpc8272ads: Remove muram from the CPM reg property.
  [POWERPC] Make clockevents work on PPC601 processors
  ...

Fixed up conflict in Documentation/powerpc/booting-without-of.txt manually.
2007-10-11 21:55:47 -07:00
Denys Vlasenko
8336793baf [ZLIB]: Move bnx2 driver gzip unpacker into zlib.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Acked-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:53:57 -07:00
Eric W. Biederman
b4b510290b [NET]: Support multiple network namespaces with netlink
Each netlink socket will live in exactly one network namespace,
this includes the controlling kernel sockets.

This patch updates all of the existing netlink protocols
to only support the initial network namespace.  Request
by clients in other namespaces will get -ECONREFUSED.
As they would if the kernel did not have the support for
that netlink protocol compiled in.

As each netlink protocol is updated to be multiple network
namespace safe it can register multiple kernel sockets
to acquire a presence in the rest of the network namespaces.

The implementation in af_netlink is a simple filter implementation
at hash table insertion and hash table look up time.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:49:09 -07:00
Alexey Dobriyan
7a5c5d5735 Move kasprintf.o to obj-y
Modulat lguest started giving linking errors

MODPOST 1 modules
ERROR: "kasprintf" [drivers/lguest/lg.ko] undefined!

Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-07 16:28:43 -07:00
Peter Zijlstra
a560aa48ee lockstat: documentation
Provide some documentation for CONFIG_LOCK_STAT.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Cc: Rob Landley <rob@landley.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-07 16:28:43 -07:00
Paul Mackerras
70f227d884 Merge branch 'linux-2.6' into for-2.6.24 2007-10-03 15:33:17 +10:00
Hugh Dickins
048c8bc90e [POWERPC] ppc64: support CONFIG_DEBUG_PREEMPT
Add CONFIG_DEBUG_PREEMPT support to ppc64: it was useful for testing
get_paca() preemption.  Cheat a little, just use debug_smp_processor_id()
in the debug version of get_paca(): it contains all the right checks and
reporting, though get_paca() doesn't really use smp_processor_id().

Use local_paca for what might have been called __raw_get_paca().
Silence harmless warnings from io.h and lparcfg.c with local_paca -
it is okay for iseries_lparcfg_data to be referencing shared_proc
with preemption enabled: all cpus should show the same value for
shared_proc.

Why do other architectures need TRACE_IRQFLAGS_SUPPORT for DEBUG_PREEMPT?
I don't know, ppc64 appears to get along fine without it.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-03 11:48:44 +10:00
Danny ter Haar
fdfb870f8e typo fix Kernel config option
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-25 08:51:04 -07:00
Linus Torvalds
2b56fec64f Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6:
  PCI: Run k8t_sound_hostbridge quirk only when needed
  PCI: disable MSI on RX790
  PCI: disable MSI on RD580
  PCI: disable MSI on RS690
  PCI: make pcie_get_readrq visible in pci.h
  PCI: lets kill the 'PCI hidden behind bridge' message
  pci/hotplug/cpqphp_ctrl.c: remove stale BKL use
  PCI: Document pci_iomap()
  PCI: quirk_e100_interrupt() called too early
  PCI: Move prototypes for pci_bus_find_capability to include/linux/pci.h
2007-08-23 21:35:45 -07:00
Geert Uytterhoeven
928923c76b Introduce CONFIG_CHECK_SIGNATURE
Introduce CONFIG_CHECK_SIGNATURE to control inclusion of check_signature()
and avoid problems on platforms that don't have readb().

Let the few legacy (ISA || PCI || X86) drivers that need check_signature()
select CONFIG_CHECK_SIGNATURE.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22 19:52:45 -07:00
Rolf Eike Beer
5ca2481424 PCI: Document pci_iomap()
This useful interface is hardly mentioned anywhere in the in-tree
documentation.

Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Cc: Tejun Heo <htejun@gmail.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-22 14:48:40 -07:00
Alan Stern
eb9a9a5631 hex_dump: add missing "const" qualifiers
Add missing "const" qualifiers to the print_hex_dump_bytes() library routines.

(akpm: rumoured to fix some compile warning somewhere)

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-11 15:47:41 -07:00
Artem Bityutskiy
6a0ed91e36 hexdump: use const notation
Trivial fix: mark the buffer to hexdump as const so callers could avoid
casting their const buffers when calling print_hex_dump().

The patch is really trivial and I suggest to consider it as a fix
(it fixes GCC warnings) and push it to current tree.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-09 08:34:23 -07:00
Oleg Nesterov
6ace06dc68 idr_remove_all: kill unused variable
"error" is always equal to 0.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31 15:39:42 -07:00
Adrian Bunk
99eb8a550d Remove the arm26 port
The arm26 port has been in a state where it was far from even compiling
for quite some time.

Ian Molton agreed with the removal.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Ian Molton <spyro@f2s.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31 15:39:39 -07:00
Sam Ravnborg
96e3e18eed lib: move kasprintf to a separate file
kasprintf pulls in kmalloc which proved to be fatal for at least
bootimage target on alpha.
Move it to a separate file so only users of kasprintf are exposed
to the dependency on kmalloc.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Meelis Roos <mroos@linux.ee>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Jay Estabrook <jay.estabrook@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31 15:39:39 -07:00
Richard Purdie
c21b37f644 lzo: add some missing casts
Add some casts to the LZO compression algorithm after they were removed
during cleanup and shouldn't have been.

Signed-off-by: Richard Purdie <rpurdie@openedhand.com>
Cc: Edward Shishkin <edward@namesys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31 15:39:37 -07:00
Cornelia Huck
cd030c4cb3 kobject: fix link error when CONFIG_HOTPLUG is disabled
Leaving kobject_actions[] in kobject_uevent.c, but putting it outside
the #ifdef looks indeed like the best solution to me. This way, we
avoid adding #ifdef CONFIG_HOTPLUG into core.c, when all other
functions called do not need such a thing.


Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-30 14:25:11 -07:00
Stephen Rothwell
6ddb23c78a fault_inject: silence a warning
lib/fault-inject.c:168: warning: 'debugfs_create_ul_MAX_STACK_TRACE_DEPTH' defined but not used

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-24 12:24:59 -07:00
Keir Fraser
df336d1c7b Fix swiotlb_sync_single_range()
If the swiotlb maps a multi-slab region, swiotlb_sync_single_range() can be
invoked to sync a sub-region which does not include the first slab.
Unfortunately io_tlb_orig_addr[] is only initialised for the first slab,
and hence the call to sync_single() will read a garbage orig_addr in this
case.

This patch fixes the issue by initialising all mapped slabs in
io_tlb_orig_addr[].  It also correctly adjusts the buffer pointer in
sync_single() to handle the case that the given dma_addr is not aligned on
a slab boundary.

Signed-off-by: Keir Fraser <keir.fraser@cl.cam.ac.uk>
Cc: "Luck, Tony" <tony.luck@intel.com>
Acked-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-21 17:49:14 -07:00
Paul Mundt
20c2df83d2 mm: Remove slab destructors from kmem_cache_create().
Slab destructors were no longer supported after Christoph's
c59def9f22 change. They've been
BUGs for both slab and slub, and slob never supported them
either.

This rips out support for the dtor pointer from kmem_cache_create()
completely and fixes up every single callsite in the kernel (there were
about 224, not including the slab allocator definitions themselves,
or the documentation references).

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-20 10:11:58 +09:00
Peter Zijlstra
f20786ff4d lockstat: core infrastructure
Introduce the core lock statistics code.

Lock statistics provides lock wait-time and hold-time (as well as the count
of corresponding contention and acquisitions events). Also, the first few
call-sites that encounter contention are tracked.

Lock wait-time is the time spent waiting on the lock. This provides insight
into the locking scheme, that is, a heavily contended lock is indicative of
a too coarse locking scheme.

Lock hold-time is the duration the lock was held, this provides a reference for
the wait-time numbers, so they can be put into perspective.

  1)
    lock
  2)
    ... do stuff ..
    unlock
  3)

The time between 1 and 2 is the wait-time. The time between 2 and 3 is the
hold-time.

The lockdep held-lock tracking code is reused, because it already collects locks
into meaningful groups (classes), and because it is an existing infrastructure
for lock instrumentation.

Currently lockdep tracks lock acquisition with two hooks:

  lock()
    lock_acquire()
    _lock()

 ... code protected by lock ...

  unlock()
    lock_release()
    _unlock()

We need to extend this with two more hooks, in order to measure contention.

  lock_contended() - used to measure contention events
  lock_acquired()  - completion of the contention

These are then placed the following way:

  lock()
    lock_acquire()
    if (!_try_lock())
      lock_contended()
      _lock()
      lock_acquired()

 ... do locked stuff ...

  unlock()
    lock_release()
    _unlock()

(Note: the try_lock() 'trick' is used to avoid instrumenting all platform
       dependent lock primitive implementations.)

It is also possible to toggle the two lockdep features at runtime using:

  /proc/sys/kernel/prove_locking
  /proc/sys/kernel/lock_stat

(esp. turning off the O(n^2) prove_locking functionaliy can help)

[akpm@linux-foundation.org: build fixes]
[akpm@linux-foundation.org: nuke unneeded ifdefs]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:49 -07:00
Kay Sievers
60a96a5956 Driver core: accept all valid action-strings in uevent-trigger
This allows the uevent file to handle any type of uevent action to be
triggered by userspace instead of just the "add" uevent.


Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-18 15:49:49 -07:00
Jeremy Fitzhardinge
86313c488a usermodehelper: Tidy up waiting
Rather than using a tri-state integer for the wait flag in
call_usermodehelper_exec, define a proper enum, and use that.  I've
preserved the integer values so that any callers I've missed should
still work OK.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Andi Kleen <ak@suse.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Joel Becker <joel.becker@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Srivatsa Vaddagiri <vatsa@in.ibm.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: David Howells <dhowells@redhat.com>
2007-07-18 08:47:40 -07:00
Jeremy Fitzhardinge
d84d1cc764 add argv_split()
argv_split() is a helper function which takes a string, splits it at
whitespace, and returns a NULL-terminated argv vector.  This is
deliberately simple - it does no quote processing of any kind.

[ Seems to me that this is something which is already being done in
  the kernel, but I couldn't find any other implementations, either to
  steal or replace.  Keep an eye out. ]

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
2007-07-18 08:47:40 -07:00
Jan Nikitenko
ad241528c4 CRC7 support
Add CRC7 routines, used for example in MMC over SPI communication.
Kerneldoc updates

[akpm@linux-foundation.org: fix funny mix of const and non-const]
Signed-off-by: Jan Nikitenko <jan.nikitenko@gmail.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:23:04 -07:00
Christoph Lameter
94f6030ca7 Slab allocators: Replace explicit zeroing with __GFP_ZERO
kmalloc_node() and kmem_cache_alloc_node() were not available in a zeroing
variant in the past.  But with __GFP_ZERO it is possible now to do zeroing
while allocating.

Use __GFP_ZERO to remove the explicit clearing of memory via memset whereever
we can.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:23:02 -07:00
Linus Torvalds
a54890d7a6 Make check_signature depend on CONFIG_HAS_IOMEM
This should avoid build problems on architectures without a "readb()",
that got bitten by check_signature() being uninlined.

Noted by Heiko Carstens.

Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 16:50:01 -07:00
Denis Vlasenko
4277eedd79 vsprintf.c: optimizing, part 2: base 10 conversion speedup, v2
Optimize integer-to-string conversion in vsprintf.c for base 10.  This is
by far the most used conversion, and in some use cases it impacts
performance.  For example, top reads /proc/$PID/stat for every process, and
with 4000 processes decimal conversion alone takes noticeable time.

Using code from

http://www.cs.uiowa.edu/~jones/bcd/decimal.html
(with permission from the author, Douglas W. Jones)

binary-to-decimal-string conversion is done in groups of five digits at
once, using only additions/subtractions/shifts (with -O2; -Os throws in
some multiply instructions).

On i386 arch gcc 4.1.2 -O2 generates ~500 bytes of code.

This patch is run tested. Userspace benchmark/test is also attached.
I tested it on PIII and AMD64 and new code is generally ~2.5 times
faster. On AMD64:

# ./vsprintf_verify-O2
Original decimal conv: .......... 151 ns per iteration
Patched decimal conv:  .......... 62 ns per iteration
Testing correctness
12895992590592 ok...        [Ctrl-C]
# ./vsprintf_verify-O2
Original decimal conv: .......... 151 ns per iteration
Patched decimal conv:  .......... 62 ns per iteration
Testing correctness
26025406464 ok...        [Ctrl-C]

More realistic test: top from busybox project was modified to
report how many us it took to scan /proc (this does not account
any processing done after that, like sorting process list),
and then I test it with 4000 processes:

#!/bin/sh
i=4000
while test $i != 0; do
    sleep 30 &
    let i--
done
busybox top -b -n3 >/dev/null

on unpatched kernel:

top: 4120 processes took 102864 microseconds to scan
top: 4120 processes took 91757 microseconds to scan
top: 4120 processes took 92517 microseconds to scan
top: 4120 processes took 92581 microseconds to scan

on patched kernel:

top: 4120 processes took 75460 microseconds to scan
top: 4120 processes took 66451 microseconds to scan
top: 4120 processes took 67267 microseconds to scan
top: 4120 processes took 67618 microseconds to scan

The speedup comes from much faster generation of /proc/PID/stat
by sprintf() calls inside the kernel.

Signed-off-by: Douglas W Jones <jones@cs.uiowa.edu>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:52 -07:00
Denis Vlasenko
b39a734097 vsprintf.c: optimizing, part 1 (easy and obvious stuff)
* There is no point in having full "0...9a...z" constant vector,
  if we use only "0...9a...f" (and "x" for "0x").

* Post-decrement usually needs a few more instructions, so use
  pre decrement instead where makes sense:
-       while (i < precision--) {
+       while (i <= --precision) {

* if base != 10 (=> base 8 or 16), we can avoid using division
  in a loop and use mask/shift, obtaining much faster conversion.
  (More complex optimization for base 10 case is in the second patch).

Overall, size vsprintf.o shows ~80 bytes smaller text section
with this patch applied.

Signed-off-by: Douglas W Jones <jones@cs.uiowa.edu>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:52 -07:00
Heiko Carstens
608e261968 generic bug: use show_regs() instead of dump_stack()
The current generic bug implementation has a call to dump_stack() in case a
WARN_ON(whatever) gets hit.  Since report_bug(), which calls dump_stack(),
gets called from an exception handler we can do better: just pass the
pt_regs structure to report_bug() and pass it to show_regs() in case of a
warning.  This will give more debug informations like register contents,
etc...  In addition this avoids some pointless lines that dump_stack()
emits, since it includes a stack backtrace of the exception handler which
is of no interest in case of a warning.  E.g.  on s390 the following lines
are currently always present in a stack backtrace if dump_stack() gets
called from report_bug():

 [<000000000001517a>] show_trace+0x92/0xe8)
 [<0000000000015270>] show_stack+0xa0/0xd0
 [<00000000000152ce>] dump_stack+0x2e/0x3c
 [<0000000000195450>] report_bug+0x98/0xf8
 [<0000000000016cc8>] illegal_op+0x1fc/0x21c
 [<00000000000227d6>] sysc_return+0x0/0x10

Acked-by: Jeremy Fitzhardinge <jeremy@goop.org>
Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Kyle McMartin <kyle@parisc-linux.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:51 -07:00
Andrew Morton
cc2ea416b2 uninline check_signature()
This is a rather bizarre thing to have inlined in io.h.  Stick it in lib/
instead.

While we're there, despaghetti it a bit, and fix its off-by-one behaviour when
passed a zero length.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:50 -07:00
Andrew Morton
b4ef0296f2 percpu_counters: use for_each_online_cpu()
Now that we have implemented hotunplug-time counter spilling,
percpu_counter_sum() only needs to look at online CPUs.

Cc: Gautham R Shenoy <ego@in.ibm.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:41 -07:00
Andrew Morton
c67ad917cb percpu_counters(): use cpu notifiers
per-cpu counters presently must iterate over all possible CPUs in the
exhaustive percpu_counter_sum().

But it can be much better to only iterate over the presently-online CPUs.  To
do this, we must arrange for an offlined CPU's count to be spilled into the
counter's central count.

We can do this for all percpu_counters in the machine by linking them into a
single global list and walking that list at CPU_DEAD time.

(I hope.  Might have race windows in which the percpu_counter_sum() count is
inaccurate?)

Cc: Gautham R Shenoy <ego@in.ibm.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:41 -07:00
Christoph Lameter
f0630fff54 SLUB: support slub_debug on by default
Add a new configuration variable

CONFIG_SLUB_DEBUG_ON

If set then the kernel will be booted by default with slab debugging
switched on. Similar to CONFIG_SLAB_DEBUG. By default slab debugging
is available but must be enabled by specifying "slub_debug" as a
kernel parameter.

Also add support to switch off slab debugging for a kernel that was
built with CONFIG_SLUB_DEBUG_ON. This works by specifying

slub_debug=-

as a kernel parameter.

Dave Jones wanted this feature.
http://marc.info/?l=linux-kernel&m=118072189913045&w=2

[akpm@linux-foundation.org: clean up switch statement]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:36 -07:00
Kristian Hoegsberg
23936cc0b5 lib: add idr_remove_all
Remove all ids from the given idr tree.  idr_destroy() only frees up
unused, cached idp_layers, but this function will remove all id mappings
and leave all idp_layers unused.

A typical clean-up sequence for objects stored in an idr tree, will use
idr_for_each() to free all objects, if necessay, then idr_remove_all() to
remove all ids, and idr_destroy() to free up the cached idr_layers.

Signed-off-by: Kristian Hoegsberg <krh@redhat.com>
Cc: Tejun Heo <htejun@gmail.com>
Cc: Dave Airlie <airlied@linux.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:34 -07:00
Kristian Hoegsberg
96d7fa421e lib: add idr_for_each()
This patch adds an iterator function for the idr data structure.  Compared
to just iterating through the idr with an integer and idr_find, this
iterator is (almost, but not quite) linear in the number of elements, as
opposed to the number of integers in the range covered by the idr.  This
makes a difference for sparse idrs, but more importantly, it's a nicer way
to iterate through the elements.

The drm subsystem is moving to idr for tracking contexts and drawables, and
with this change, we can use the idr exclusively for tracking these
resources.

[akpm@linux-foundation.org: fix comment]
Signed-off-by: Kristian Hoegsberg <krh@redhat.com>
Cc: Tejun Heo <htejun@gmail.com>
Cc: Dave Airlie <airlied@linux.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:34 -07:00
Linus Torvalds
2d896c780d Merge branch 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6
* 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6: (37 commits)
  [XFS] Fix lockdep annotations for xfs_lock_inodes
  [LIB]: export radix_tree_preload()
  [XFS] Fix XFS_IOC_FSBULKSTAT{,_SINGLE} & XFS_IOC_FSINUMBERS in compat mode
  [XFS] Compat ioctl handler for handle operations
  [XFS] Compat ioctl handler for XFS_IOC_FSGEOMETRY_V1.
  [XFS] Clean up function name handling in tracing code
  [XFS] Quota inode has no parent.
  [XFS] Concurrent Multi-File Data Streams
  [XFS] Use uninitialized_var macro to stop warning about rtx
  [XFS] XFS should not be looking at filp reference counts
  [XFS] Use is_power_of_2 instead of open coding checks
  [XFS] Reduce shouting by removing unnecessary macros from dir2 code.
  [XFS] Simplify XFS min/max macros.
  [XFS] Kill off xfs_count_bits
  [XFS] Cancel transactions on xfs_itruncate_start error.
  [XFS] Use do_div() on 64 bit types.
  [XFS] Fix remount,readonly path to flush everything correctly.
  [XFS] Cleanup inode extent size hint extraction
  [XFS] Prevent ENOSPC from aborting transactions that need to succeed
  [XFS] Prevent deadlock when flushing inodes on unmount
  ...
2007-07-15 16:43:43 -07:00
David Chinner
d7f0923d83 [LIB]: export radix_tree_preload()
XFS filestreams functionality uses radix trees and the preload
functions. XFS can be built as a module and hence we need
radix_tree_preload() exported. radix_tree_preload_end() is a
static inline, so it doesn't need exporting.

Signed-Off-By: Dave Chinner <dgc@sgi.com>
Signed-Off-By: Tim Shimmin <tes@sgi.com>
2007-07-14 16:05:04 +10:00
Tejun Heo
608e266a2d sysfs: make kobj point to sysfs_dirent instead of dentry
As kobj sysfs dentries and inodes are gonna be made reclaimable,
dentry can't be used as naming token for sysfs file/directory, replace
kobj->dentry with kobj->sd.  The only external interface change is
shadow directory handling.  All other changes are contained in kobj
and sysfs.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11 16:09:08 -07:00
Tejun Heo
72dba584b6 ida: implement idr based id allocator
Implement idr based id allocator.  ida is used the same way idr is
used but lacks id -> ptr translation and thus consumes much less
memory.  struct ida_bitmap is attached as leaf nodes to idr tree which
is managed by the idr code.  Each ida_bitmap is 128bytes long and
contains slightly less than a thousand slots.

ida is more aggressive with releasing extra resources acquired using
ida_pre_get().  After every successful id allocation, ida frees one
reserved idr_layer if possible.  Reserved ida_bitmap is not freed
automatically but only one ida_bitmap is reserved and it's almost
always used right away.  Under most circumstances, ida won't hold on
to memory for too long which isn't actively used.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11 16:09:03 -07:00
Tejun Heo
e33ac8bdb0 idr: separate out idr_mark_full()
Separate out idr_mark_full() from sub_alloc() and make marking the
allocated slot full the responsibility of idr_get_new_above_int().

Allocation part of idr_get_new_above_int() is renamed to
idr_get_empty_slot().  New idr_get_new_above_int() allocates a slot
using the function, install the user pointer and marks it full using
idr_mark_full().

This change doesn't introduce any behavior change.  This will be
used by ida.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11 16:09:03 -07:00
Tejun Heo
7aae6dd80e idr: fix obscure bug in allocation path
In sub_alloc(), when bitmap search fails, it goes up one level to
continue search.  This is done by updating the id cursor and searching
the upper level again.  If the cursor was at the end of the upper
level, we need to go further than that.

This wasn't implemented and when that happens the part of the cursor
which indexes into the upper level wraps and sub_alloc() ends up
searching the wrong bitmap.  It allocates id which doesn't match the
actual slot.

This patch fixes this by restarting from the top if the search needs
to go higher than one level.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11 16:09:02 -07:00
Kay Sievers
80f03e349f Driver core: add missing kset uevent
We get uevents for a bus/class going away, but not one registering.
Add the missing uevent in kset_register(), which will send an
event for a new bus/class. Suppress all unwanted uevents for bus
subdirectories like /bus/*/devices/, /bus/*/drivers/.

Now we get for module usbcore:
  add      /module/usbcore (module)
  add      /bus/usb (bus)
  add      /class/usb_host (class)
  add      /bus/usb/drivers/hub (drivers)
  add      /bus/usb/drivers/usb (drivers)
  remove   /bus/usb/drivers/usb (drivers)
  remove   /bus/usb/drivers/hub (drivers)
  remove   /class/usb_host (class)
  remove   /bus/usb (bus)
  remove   /module/usbcore (module)

instead of:
  add      /module/usbcore (module)
  add      /bus/usb/drivers/hub (drivers)
  add      /bus/usb/drivers/usb (drivers)
  remove   /bus/usb/drivers/usb (drivers)
  remove   /bus/usb/drivers/hub (drivers)
  remove   /class/usb_host (class)
  remove   /bus/usb/drivers (bus)
  remove   /bus/usb/devices (bus)
  remove   /bus/usb (bus)
  remove   /module/usbcore (module)

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11 16:09:01 -07:00
Richard Purdie
64c70b1cf4 Add LZO1X algorithm to the kernel
This is a hybrid version of the patch to add the LZO1X compression
algorithm to the kernel.  Nitin and myself have merged the best parts of
the various patches to form this version which we're both happy with (and
are jointly signing off).

The performance of this version is equivalent to the original minilzo code
it was based on.  Bytecode comparisons have also been made on ARM, i386 and
x86_64 with favourable results.

There are several users of LZO lined up including jffs2, crypto and reiser4
since its much faster than zlib.

Signed-off-by: Nitin Gupta <nitingupta910@gmail.com>
Signed-off-by: Richard Purdie <rpurdie@openedhand.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-10 17:51:13 -07:00
Ingo Molnar
b642b6d3fa sched: scheduler debugging, enable in Kconfig
enable CONFIG_SCHED_DEBUG in lib/Kconfig.debug.

the runtime overhead of this option is very small.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-07-09 18:52:00 +02:00
Linus Torvalds
837525e344 Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6:
  firmware: remove orphaned Email
  kobject: use the proper printk level for kobject error
  Driver core: kill unused code
  Driver core: keep PHYSDEV for old struct class_device
  update Documentation/driver-model/platform.txt
2007-06-08 18:11:47 -07:00
Randy Dunlap
c790923499 hexdump: more output formatting
Add a prefix string parameter.  Callers are responsible for any string
length/alignment that they want to see in the output.  I.e., callers should
pad strings to achieve alignment if they want that.

Add rowsize parameter.  This is the number of raw data bytes to be printed
per line.  Must be 16 or 32.

Add a groupsize parameter.  This allows callers to dump values as 1-byte,
2-byte, 4-byte, or 8-byte numbers.  Default is 1-byte numbers.  If the
total length is not an even multiple of groupsize, 1-byte numbers are
printed.

Add an "ascii" output parameter.  This causes ASCII data output following
the hex data output.

Clean up some doc examples.

Align the ASCII output on all lines that are produced by one call.

Add a new interface, print_hex_dump_bytes(), that is a shortcut to
print_hex_dump(), using default parameter values to print 16 bytes in
byte-size chunks of hex + ASCII output, using printk level KERN_DEBUG.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-08 17:23:34 -07:00
Greg Kroah-Hartman
5c73a3fba6 kobject: use the proper printk level for kobject error
Thanks to Jean Delvare <khali@linux-fr.org> for pointing it out to me.

Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-08 12:41:08 -07:00
Ingo Molnar
c1a834dc70 timer stats: speedups
Make timer-stats have almost zero overhead when enabled in the config but
not used.  (this way distros can enable it more easily)

Also update the documentation about overhead of timer_stats - it was
written for the first version which had a global lock and a linear list
walk based lookup ;-)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-01 08:18:30 -07:00
Paul E. McKenney
9aaffc898f prohibit rcutorture from being compiled into the kernel
There have been a number of instances where people have accidentally compiled
rcutorture into the kernel (CONFIG_RCU_TORTURE_TEST=y), which has never been
useful, and has often resulted in great frustration.

The attached patch prohibits rcutorture from being compiled into the
kernel.  It may be excluded altogether or compiled as a module.  People
wishing to have rcutorture hammer their machine immediately upon boot
are free to hand-edit lib/Kconfig.debug to remove the "depends on m"
line.

Thanks to Randy Dunlap for the trick that makes this work.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Josh Triplett <josh@kernel.org>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-23 20:14:12 -07:00
Alexey Dobriyan
e8edc6e03a Detach sched.h from mm.h
First thing mm.h does is including sched.h solely for can_do_mlock() inline
function which has "current" dereference inside. By dealing with can_do_mlock()
mm.h can be detached from sched.h which is good. See below, why.

This patch
a) removes unconditional inclusion of sched.h from mm.h
b) makes can_do_mlock() normal function in mm/mlock.c
c) exports can_do_mlock() to not break compilation
d) adds sched.h inclusions back to files that were getting it indirectly.
e) adds less bloated headers to some files (asm/signal.h, jiffies.h) that were
   getting them indirectly

Net result is:
a) mm.h users would get less code to open, read, preprocess, parse, ... if
   they don't need sched.h
b) sched.h stops being dependency for significant number of files:
   on x86_64 allmodconfig touching sched.h results in recompile of 4083 files,
   after patch it's only 3744 (-8.3%).

Cross-compile tested on

	all arm defconfigs, all mips defconfigs, all powerpc defconfigs,
	alpha alpha-up
	arm
	i386 i386-up i386-defconfig i386-allnoconfig
	ia64 ia64-up
	m68k
	mips
	parisc parisc-up
	powerpc powerpc-up
	s390 s390-up
	sparc sparc-up
	sparc64 sparc64-up
	um-x86_64
	x86_64 x86_64-up x86_64-defconfig x86_64-allnoconfig

as well as my two usual configs.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-21 09:18:19 -07:00
Akinobu Mita
6d690dcac9 fault injection: disable stacktrace filter for x86-64
Disable stacktrace filter support for x86-64 for now.  Will be enable when we
can get the dwarf2 unwinder back.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-12 10:55:39 -07:00
Linus Torvalds
853da00220 Merge branch 'audit.b38' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current
* 'audit.b38' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current:
  [PATCH] Abnormal End of Processes
  [PATCH] match audit name data
  [PATCH] complete message queue auditing
  [PATCH] audit inode for all xattr syscalls
  [PATCH] initialize name osid
  [PATCH] audit signal recipients
  [PATCH] add SIGNAL syscall class (v3)
  [PATCH] auditing ptrace
2007-05-11 09:57:16 -07:00
Randy Dunlap
99eaf3c45f lib/hexdump
Based on ace_dump_mem() from Grant Likely for the Xilinx SystemACE
CompactFlash interface.

Add print_hex_dump() & hex_dumper() to lib/hexdump.c and linux/kernel.h.

This patch adds the functions print_hex_dump() & hex_dumper().
print_hex_dump() can be used to perform a hex + ASCII dump of data to
syslog, in an easily viewable format, thus providing a common text hex dump
format.

hex_dumper() provides a dump-to-memory function.  It converts one "line" of
output (16 bytes of input) at a time.

Example usages:
	print_hex_dump(KERN_DEBUG, DUMP_PREFIX_ADDRESS, frame->data, frame->len);
	hex_dumper(frame->data, frame->len, linebuf, sizeof(linebuf));

Example output using %DUMP_PREFIX_OFFSET:
0009ab42: 40414243 44454647 48494a4b 4c4d4e4f-@ABCDEFG HIJKLMNO
Example output using %DUMP_PREFIX_ADDRESS:
ffffffff88089af0: 70717273 74757677 78797a7b 7c7d7e7f-pqrstuvw xyz{|}~.

[akpm@linux-foundation.org: cleanups, add export]
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-11 08:29:34 -07:00
Amy Griffis
e54dc2431d [PATCH] audit signal recipients
When auditing syscalls that send signals, log the pid and security
context for each target process. Optimize the data collection by
adding a counter for signal-related rules, and avoiding allocating an
aux struct unless we have more than one target process. For process
groups, collect pid/context data in blocks of 16. Move the
audit_signal_info() hook up in check_kill_permission() so we audit
attempts where permission is denied.

Signed-off-by: Amy Griffis <amy.griffis@hp.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2007-05-11 05:38:25 -04:00
Amy Griffis
7f13da40e3 [PATCH] add SIGNAL syscall class (v3)
Add a syscall class for sending signals.

Signed-off-by: Amy Griffis <amy.griffis@hp.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2007-05-11 05:38:25 -04:00
Linus Torvalds
9b6a51746f Merge branch 'juju' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6
* 'juju' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: (138 commits)
  firewire: Convert OHCI driver to use standard goto unwinding for error handling.
  firewire: Always use parens with sizeof.
  firewire: Drop single buffer request support.
  firewire: Add a comment to describe why we split the sg list.
  firewire: Return SCSI_MLQUEUE_HOST_BUSY for out of memory cases in queuecommand.
  firewire: Handle the last few DMA mapping error cases.
  firewire: Allocate scsi_host up front and allocate the sbp2_device as hostdata.
  firewire: Provide module aliase for backwards compatibility.
  firewire: Add to fw-core-y instead of assigning fw-core-objs in Makefile.
  firewire: Break out shared IEEE1394 constant to separate header file.
  firewire: Use linux/*.h instead of asm/*.h header files.
  firewire: Uppercase most macro names.
  firewire: Coding style cleanup: no spaces after function names.
  firewire: Convert card_rwsem to a regular mutex.
  firewire: Clean up comment style.
  firewire: Use lib/ implementation of CRC ITU-T.
  CRC ITU-T V.41
  firewire: Rename fw-device-cdev.c to fw-cdev.c and move header to include/linux.
  firewire: Future proof the iso ioctls by adding a handle for the iso context.
  firewire: Add read/write and size annotations to IOC numbers.
  ...

Acked-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-10 13:30:08 -07:00
Ivo van Doorn
3e7cbae7c6 CRC ITU-T V.41
This will add the CRC calculation according
to the CRC ITU-T V.41 to the kernel lib/ folder.

This code has been derived from the rt2x00 driver,
currently found only in the wireless-dev tree, but
this library is generic and could be used by more
drivers who currently use their own implementation.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>

Also useful for the new firewire stack.

Signed-off-by: Kristian Hoegsberg <krh@redhat.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-05-10 18:24:13 +02:00
Linus Torvalds
ba7cc09c9c Merge git://git.infradead.org/mtd-2.6
* git://git.infradead.org/mtd-2.6: (21 commits)
  [MTD] [CHIPS] Remove MTD_OBSOLETE_CHIPS (jedec, amd_flash, sharp)
  [MTD] Delete allegedly obsolete "bank_size" field of mtd_info.
  [MTD] Remove unnecessary user space check from mtd.h.
  [MTD] [MAPS] Remove flash maps for no longer supported 405LP boards
  [MTD] [MAPS] Fix missing printk() parameter in physmap_of.c MTD driver
  [MTD] [NAND] platform NAND driver: add driver
  [MTD] [NAND] platform NAND driver: update header
  [JFFS2] Simplify and clean up jffs2_add_tn_to_tree() some more.
  [JFFS2] Remove another bogus optimisation in jffs2_add_tn_to_tree()
  [JFFS2] Remove broken insert_point optimisation in jffs2_add_tn_to_tree()
  [JFFS2] Remember to calculate overlap on nodes which replace older nodes
  [JFFS2] Don't advance c->wbuf_ofs to next eraseblock after wbuf flush
  [MTD] [NAND] at91_nand.c: CMDLINE_PARTS support
  [MTD] [NAND] Tidy up handling of page number in nand_block_bad()
  [MTD] block2mtd_paramline[] mustn't be __initdata
  [MTD] [NAND] Support multiple chips in CAFÉ driver
  [MTD] [NAND] Rename cafe.c to cafe_nand.c and remove the multi-obj magic
  [MTD] [NAND] Use rslib for CAFÉ ECC
  [RSLIB] Support non-canonical GF representations
  [JFFS2] Remove dead file histo_mips.h
  ...
2007-05-09 13:10:11 -07:00
Rafael J. Wysocki
8bb7844286 Add suspend-related notifications for CPU hotplug
Since nonboot CPUs are now disabled after tasks and devices have been
frozen and the CPU hotplug infrastructure is used for this purpose, we need
special CPU hotplug notifications that will help the CPU-hotplug-aware
subsystems distinguish normal CPU hotplug events from CPU hotplug events
related to a system-wide suspend or resume operation in progress.  This
patch introduces such notifications and causes them to be used during
suspend and resume transitions.  It also changes all of the
CPU-hotplug-aware subsystems to take these notifications into consideration
(for now they are handled in the same way as the corresponding "normal"
ones).

[oleg@tv-sign.ru: cleanups]
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Gautham R Shenoy <ego@in.ibm.com>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09 12:30:56 -07:00
Alistair John Strachan
794543a236 Move LOG_BUF_SHIFT to a more sensible place
Several people have observed that perhaps LOG_BUF_SHIFT should be in a more
obvious place than under DEBUG_KERNEL. Under some circumstances (such as the
PARISC architecture), DEBUG_KERNEL can increase kernel size, which is an
undesirable trade off for something as trivial as increasing the kernel log
buffer size.

Instead, move LOG_BUF_SHIFT into "General Setup", so that people are more
likely to be able to change it such a circumstance that the default buffer
size is insufficient.

Signed-off-by: Alistair John Strachan <s0348365@sms.ed.ac.uk>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:14 -07:00
Johannes Berg
c6b40d16d1 fix sscanf %n match at end of input string
I was playing with some code that sometimes got a string where a %n
match should have been done where the input string ended, for example
like this:

  sscanf("abc123", "abc%d%n", &a, &n);  /* doesn't work */
  sscanf("abc123a", "abc%d%n", &a, &n); /* works */

However, the scanf function in the kernel doesn't convert the %n in that
case because it has already matched the complete input after %d and just
completely stops matching then. This patch fixes that.

[akpm@linux-foundation.org: cleanups]
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:05 -07:00
Robert P. J. Day
c761c84154 kconfig: centralize the selection of semaphore debugging in lib/Kconfig.debug
Remove the Kconfig selection of semaphore debugging from the ALPHA and FRV
Kconfig files, and centralize it in lib/Kconfig.debug.

There doesn't seem to be much point in letting individual architectures
independently define the same Kconfig option when it can just as easily be
put in a single Kconfig file and made dependent on a subset of
architectures.  that way, at least the option shows up in the same relative
location in the menu each time.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:00 -07:00
Sam Ravnborg
b2ead6e012 fix section mismatch warning in lib/swiotlb.c
kbuild spits outs following warning on a
defconfig x86_64 build:
WARNING: swiotlb.o - Section mismatch: reference to .init.text:swiotlb_init from __ksymtab between '__ksymtab_swiotlb_init' (at offset 0xa0) and '__ksymtab_swiotlb_free_coherent'

This warning happens because the function swiotlb_init is marked __init and
EXPORT_SYMBOL().  A 'git grep swiotlb_init' showed no users in drivers/ so
remove the EXPORT_SYMBOL.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Andi Kleen <ak@suse.de>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:14:59 -07:00
Christoph Hellwig
ab1b6f03a1 simplify the stacktrace code
Simplify the stacktrace code:

 - remove the unused task argument to save_stack_trace, it's always
   current
 - remove the all_contexts flag, it's alwasy 0

Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Andi Kleen <ak@suse.de>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:14:58 -07:00
Richard Purdie
f0ac675806 Fix ppp_deflate issues with recent zlib_inflate changes
The last zlib_inflate update broke certain corner cases for ppp_deflate
decompression handling.  This patch fixes some logic to make things work
properly again.  Users other than ppp_deflate (the only Z_PACKET_FLUSH
user) should be unaffected.

Fixes bug 8405 (confirmed by Stefan)

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Cc: Stefan Wenk <stefan.wenk@gmx.at>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 12:13:04 -07:00
Bryan Wu
1394f03221 blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix!  Tinyboards.

The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc.  (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000.  Since then ADI has put this core into its Blackfin
processor family of devices.  The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set.  It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.

The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf

The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc

This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/

We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel

[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 12:12:58 -07:00
Heiko Carstens
411f0f3edc Introduce CONFIG_HAS_DMA
Architectures that don't support DMA can say so by adding a config NO_DMA
to their Kconfig file.  This will prevent compilation of some dma specific
driver code.  Also dma-mapping-broken.h isn't needed anymore on at least
s390.  This avoids compilation and linking of otherwise dead/broken code.

Other architectures that include dma-mapping-broken.h are arm26, h8300,
m68k, m68knommu and v850.  If these could be converted as well we could get
rid of the header file.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
"John W. Linville" <linville@tuxdriver.com>
Cc: Kyle McMartin <kyle@parisc-linux.org>
Cc: <James.Bottomley@SteelEye.com>
Cc: Tejun Heo <htejun@gmail.com>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: <geert@linux-m68k.org>
Cc: <zippel@linux-m68k.org>
Cc: <spyro@f2s.com>
Cc: <uclinux-v850@lsi.nec.co.jp>
Cc: <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 12:12:51 -07:00
Christoph Lameter
476f35348e Safer nr_node_ids and nr_node_ids determination and initial values
The nr_cpu_ids value is currently only calculated in smp_init.  However, it
may be needed before (SLUB needs it on kmem_cache_init!) and other kernel
components may also want to allocate dynamically sized per cpu array before
smp_init.  So move the determination of possible cpus into sched_init()
where we already loop over all possible cpus early in boot.

Also initialize both nr_node_ids and nr_cpu_ids with the highest value they
could take.  If we have accidental users before these values are determined
then the current valud of 0 may cause too small per cpu and per node arrays
to be allocated.  If it is set to the maximum possible then we only waste
some memory for early boot users.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 12:12:51 -07:00
Linus Torvalds
15700770ef Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild: (38 commits)
  kconfig: fix mconf segmentation fault
  kbuild: enable use of code from a different dir
  kconfig: error out if recursive dependencies are found
  kbuild: scripts/basic/fixdep segfault on pathological string-o-death
  kconfig: correct minor typo in Kconfig warning message.
  kconfig: fix path to modules.txt in Kconfig help
  usr/Kconfig: fix typo
  kernel-doc: alphabetically-sorted entries in index.html of 'htmldocs'
  kbuild: be more explicit on missing .config file
  kbuild: clarify the creation of the LOCALVERSION_AUTO string.
  kbuild: propagate errors from find in scripts/gen_initramfs_list.sh
  kconfig: refer to qt3 if we cannot find qt libraries
  kbuild: handle compressed cpio initramfs-es
  kbuild: ignore section mismatch warning for references from .paravirtprobe to .init.text
  kbuild: remove stale comment in modpost.c
  kbuild/mkuboot.sh: allow spaces in CROSS_COMPILE
  kbuild: fix make mrproper for Documentation/DocBook/man
  kbuild: remove kconfig binaries during make mrproper
  kconfig/menuconfig: do not hardcode '.config'
  kbuild: override build timestamp & version
  ...
2007-05-06 13:21:57 -07:00
Linus Torvalds
ea62ccd00f Merge branch 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6
* 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6: (231 commits)
  [PATCH] i386: Don't delete cpu_devs data to identify different x86 types in late_initcall
  [PATCH] i386: type may be unused
  [PATCH] i386: Some additional chipset register values validation.
  [PATCH] i386: Add missing !X86_PAE dependincy to the 2G/2G split.
  [PATCH] x86-64: Don't exclude asm-offsets.c in Documentation/dontdiff
  [PATCH] i386: avoid redundant preempt_disable in __unlazy_fpu
  [PATCH] i386: white space fixes in i387.h
  [PATCH] i386: Drop noisy e820 debugging printks
  [PATCH] x86-64: Fix allnoconfig error in genapic_flat.c
  [PATCH] x86-64: Shut up warnings for vfat compat ioctls on other file systems
  [PATCH] x86-64: Share identical video.S between i386 and x86-64
  [PATCH] x86-64: Remove CONFIG_REORDER
  [PATCH] x86-64: Print type and size correctly for unknown compat ioctls
  [PATCH] i386: Remove copy_*_user BUG_ONs for (size < 0)
  [PATCH] i386: Little cleanups in smpboot.c
  [PATCH] x86-64: Don't enable NUMA for a single node in K8 NUMA scanning
  [PATCH] x86: Use RDTSCP for synchronous get_cycles if possible
  [PATCH] i386: Add X86_FEATURE_RDTSCP
  [PATCH] i386: Implement X86_FEATURE_SYNC_RDTSC on i386
  [PATCH] i386: Implement alternative_io for i386
  ...

Fix up trivial conflict in include/linux/highmem.h manually.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-05 14:55:20 -07:00
Linus Torvalds
6cbf0c704d iomap: make the default iomap functions fail softer
We used to BUG_ON() for a badly mapped IO port, which is certainly
correct, but actually made it harder to debug the case where the ATA
drivers had incorrectly mapped a nonconnected ATA port.

So make badly mapped ports trigger a WARN_ON(), and throw the IO away
instead (and return all ones for reads).  For things like broken driver
initialization - which is the most likely cause anyway - that should
mean that the machine comes up and is usable (at least that was the case
for the ATA breakage that triggered this patch).

It tends to be a whole lot easier to do a "dmesg" on a working machine
than to try to capture logs off a dead one.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-04 20:44:23 -07:00
Linus Torvalds
7e20ef030d Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (49 commits)
  [SCTP]: Set assoc_id correctly during INIT collision.
  [SCTP]: Re-order SCTP initializations to avoid race with sctp_rcv()
  [SCTP]: Fix the SO_REUSEADDR handling to be similar to TCP.
  [SCTP]: Verify all destination ports in sctp_connectx.
  [XFRM] SPD info TLV aggregation
  [XFRM] SAD info TLV aggregationx
  [AF_RXRPC]: Sort out MTU handling.
  [AF_IUCV/IUCV] : Add missing section annotations
  [AF_IUCV]: Implementation of a skb backlog queue
  [NETLINK]: Remove bogus BUG_ON
  [IPV6]: Some cleanups in include/net/ipv6.h
  [TCP]: zero out rx_opt in tcp_disconnect()
  [BNX2]: Fix TSO problem with small MSS.
  [NET]: Rework dev_base via list_head (v3)
  [TCP] Highspeed: Limited slow-start is nowadays in tcp_slow_start
  [BNX2]: Update version and reldate.
  [BNX2]: Print bus information for PCIE devices.
  [BNX2]: Add 1-shot MSI handler for 5709.
  [BNX2]: Restructure PHY event handling.
  [BNX2]: Add indirect spinlock.
  ...
2007-05-04 19:36:58 -07:00
David Howells
ef4533f8af [AFS]: Make the match_*() functions take const options.
Make the match_*() functions take a const pointer to the options table
and make strings pointers in the options table const too.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-03 03:10:39 -07:00
Greg Kroah-Hartman
823bccfc40 remove "struct subsystem" as it is no longer needed
We need to work on cleaning up the relationship between kobjects, ksets and
ktypes.  The removal of 'struct subsystem' is the first step of this,
especially as it is not really needed at all.

Thanks to Kay for fixing the bugs in this patch.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-02 18:57:59 -07:00
Andreas Dilger
b72e53f8bb kconfig.debug: clarify CONFIG_DEBUG_INFO help text
The following patch adds some extra clarification to the CONFIG_DEBUG_INFO
Kconfig help text.  The current text is mostly a recursive definition and
doesn't really say much of anything.  When I first read this I thought it
was going to enable extra verbosity in debug messages or something, but it
is only enabling the "gcc -g" compile option in the Makefile.

Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-05-02 20:58:09 +02:00
Jeremy Fitzhardinge
39b7ee0685 [PATCH] x86-64: deflate inflate_dynamic too
inflate_dynamic() has piggy stack usage too, so heap allocate it too.
I'm not sure it actually gets used, but it shows up large in "make
checkstack".

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:15 +02:00
Jeremy Fitzhardinge
35c7422649 [PATCH] x86: deflate stack usage in lib/inflate.c
inflate_fixed and huft_build together use around 2.7k of stack.  When
using 4k stacks, I saw stack overflows from interrupts arriving while
unpacking the root initrd:

do_IRQ: stack overflow: 384
 [<c0106b64>] show_trace_log_lvl+0x1a/0x30
 [<c01075e6>] show_trace+0x12/0x14
 [<c010763f>] dump_stack+0x16/0x18
 [<c0107ca4>] do_IRQ+0x6d/0xd9
 [<c010202b>] xen_evtchn_do_upcall+0x6e/0xa2
 [<c0106781>] xen_hypervisor_callback+0x25/0x2c
 [<c010116c>] xen_restore_fl+0x27/0x29
 [<c0330f63>] _spin_unlock_irqrestore+0x4a/0x50
 [<c0117aab>] change_page_attr+0x577/0x584
 [<c0117b45>] kernel_map_pages+0x8d/0xb4
 [<c016a314>] cache_alloc_refill+0x53f/0x632
 [<c016a6c2>] __kmalloc+0xc1/0x10d
 [<c0463d34>] malloc+0x10/0x12
 [<c04641c1>] huft_build+0x2a7/0x5fa
 [<c04645a5>] inflate_fixed+0x91/0x136
 [<c04657e2>] unpack_to_rootfs+0x5f2/0x8c1
 [<c0465acf>] populate_rootfs+0x1e/0xe4

(This was under Xen, but there's no reason it couldn't happen on bare
  hardware.)

This patch mallocs the local variables, thereby reducing the stack
usage to sane levels.

Also, up the heap size for the kernel decompressor to deal with the
extra allocation.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Tim Yamin <plasmaroo@gentoo.org>
Cc: Andi Kleen <ak@suse.de>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ian Molton <spyro@f2s.com>
2007-05-02 19:27:15 +02:00
Segher Boessenkool
d7e5a5462f [RSLIB] Support non-canonical GF representations
For the CAFÉ NAND controller, we need to support non-canonical 
representations of the Galois field. Allow the caller to provide its own 
function for generating the field, and CAFÉ can use rslib instead of its
own implementation.

Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-05-02 11:56:33 +01:00
Jeremy Fitzhardinge
11443ec7d9 Add kvasprintf()
Add a kvasprintf() function to complement kasprintf().

No in-tree users yet, but I have some coming up.

[akpm@linux-foundation.org: EXPORT it]
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Keir Fraser <keir@xensource.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-30 16:40:40 -07:00
Tejun Heo
ec04b07584 iomap: implement pcim_iounmap_regions()
Implement pcim_iounmap_regions() - the opposite of
pcim_iomap_regions().

Signed-off-by: Tejun heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28 14:15:58 -04:00
Adrian Bunk
3106d46f51 the overdue removal of the mount/umount uevents
This patch contains the overdue removal of the mount/umount uevents.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27 10:57:31 -07:00
Eric W. Biederman
2753133eb3 kobject: Comment and warning fixes to kobject.c
This dots some i's and crosses some t's after left over from when
kobject_kset_add_dir was built from kobject_add_dir. 

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27 10:57:31 -07:00
Greg Kroah-Hartman
4628803062 kobject core: remove rwsem from struct subsystem
It isn't used at all by the driver core anymore, and the few usages of
it within the kernel have now all been fixed as most of them were using
it incorrectly.  So remove it.

Now the whole struct subsys can be removed from the system, but that's
for a later patch...

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27 10:57:31 -07:00
Cornelia Huck
88db4721d4 kobject: kobject_add() reference leak
We leak a reference if we attempt to add a kobject with no name.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27 10:57:30 -07:00
John Anthony Kazos Jr
14193fb91a Kobject: kobject_uevent.c: Collapse unnecessary loop nesting (top_kobj)
Collapses a do..while() loop within an if() to a simple while() loop for 
simplicity and readability.

Signed-off-by: John Anthony Kazos Jr. <jakj@j-a-k-j.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27 10:57:29 -07:00
Jean Tourrilhes
ca2f37dbc5 Driver core: notify userspace of network device renames
Provide rename event for when we rename network devices.

Signed-off-by: Jean Tourrilhes <jt@hpl.hp.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27 10:57:29 -07:00
Oliver Neukum
1b0b3b9980 kref: fix CPU ordering with respect to krefs
some atomic operations are only atomic, not ordered. Thus a CPU is allowed
to reorder memory references to an object to before the reference is
obtained. This fixes it.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27 10:57:29 -07:00
Dmitriy Monakhov
460f7e9a1b kobject: kobject_shadow_add cleanup
- correct function name in comments
 - parrent assignment does metter only inside "if" block, 
   so move it inside this block.

Signed-off-by: Monakhov Dmitriy <dmonakhov@openvz.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27 10:57:28 -07:00
Kay Sievers
864062457a driver core: fix namespace issue with devices assigned to classes
- uses a kset in "struct class" to keep track of all directories
    belonging to this class
  - merges with the /sys/devices/virtual logic.
  - removes the namespace-dir if the last member of that class
    leaves the directory.

There may be locking or refcounting fixes left, I stopped when it seemed
to work with network and sound modules. :)

From: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27 10:57:28 -07:00
Linus Torvalds
0278ef8b48 Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: (67 commits)
  [SCSI] SUNESP: Complete driver rewrite to version 2.0
  [SPARC64]: Convert PCI over to generic struct iommu/strbuf.
  [SPARC]: device_node name constification fallout
  [SPARC64]: Convert SBUS over to generic iommu/strbuf structs.
  [SPARC64]: Add generic iommu and strbuf structs to iommu.h
  [SPARC64]: Consolidate {sbus,pci}_iommu_arena.
  [SPARC]: Make device_node name and type const
  [SPARC64]: constify some paramaters of OF routines
  [TIGON3]: of_get_property() returns const.
  [SPARC64]: Fix PCI rework to adhere to of_get_property() const return.
  [SPARC64]: Document and fix calculation of pages_avail.
  [SPARC64]: Make sure pbm->prom_node is setup easly enough in psycho.c
  [SPARC64]: Use bootmem_bootmap_pages() in choose_bootmap_pfn().
  [SPARC64]: Add proper header file extern for cmdline_memory_size.
  [SPARC64]: Kill sparc_ultra_dump_{i,d}tlb()
  [SPARC64]: Use DECLARE_BITMAP and BITS_TO_LONGS in mm/init.c
  [SPARC64]: Give move verbose show_mem() output just like i386.
  [SPARC64]: Mark show_mem() printk's with KERN_INFO.
  [SPARC64]: Kill kvaddr_to_phys() and friends.
  [SPARC64]: Privatize sun4u_get_pte() and fix name.
  ...
2007-04-27 09:29:04 -07:00
Linus Torvalds
15c5403396 Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (448 commits)
  [IPV4] nl_fib_lookup: Initialise res.r before fib_res_put(&res)
  [IPV6]: Fix thinko in ipv6_rthdr_rcv() changes.
  [IPV4]: Add multipath cached to feature-removal-schedule.txt
  [WIRELESS] cfg80211: Clarify locking comment.
  [WIRELESS] cfg80211: Fix locking in wiphy_new.
  [WEXT] net_device: Don't include wext bits if not required.
  [WEXT]: Misc code cleanups.
  [WEXT]: Reduce inline abuse.
  [WEXT]: Move EXPORT_SYMBOL statements where they belong.
  [WEXT]: Cleanup early ioctl call path.
  [WEXT]: Remove options.
  [WEXT]: Remove dead debug code.
  [WEXT]: Clean up how wext is called.
  [WEXT]: Move to net/wireless
  [AFS]: Eliminate cmpxchg() usage in vlocation code.
  [RXRPC]: Fix pointers passed to bitops.
  [RXRPC]: Remove bogus atomic_* overrides.
  [AFS]: Fix u64 printing in debug logging.
  [AFS]: Add "directory write" support.
  [AFS]: Implement the CB.InitCallBackState3 operation.
  ...
2007-04-27 09:26:46 -07:00
Franck Bui-Huu
14cf232ab1 [MIPS] Don't force frame pointers for lockdep on MIPS
Stacktrace support on MIPS doesn't use frame pointers.  Since this option
considerably increases the size of the kernel code, force lockdep to not
use it.

Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-04-27 16:20:26 +01:00
David S. Miller
ded220bd8f [STRING]: Move strcasecmp/strncasecmp to lib/string.c
We have several platforms using local copies of identical
code.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 01:54:39 -07:00
Patrick McHardy
af65bdfce9 [NETLINK]: Switch cb_lock spinlock to mutex and allow to override it
Switch cb_lock to mutex and allow netlink kernel users to override it
with a subsystem specific mutex for consistent locking in dump callbacks.
All netlink_dump_start users have been audited not to rely on any
side-effects of the previously used spinlock.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:29:03 -07:00
David S. Miller
cb8c181f28 [S390]: Fix build on 31-bit.
Allow s390 to properly override the generic
__div64_32() implementation by:

1) Using obj-y for div64.o in s390's makefile instead
   of lib-y

2) Adding the weak attribute to the generic implementation.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:28:53 -07:00
Stephen Hemminger
22b9a0a3a4 [LIB]: div64_64 optimization
Minor optimization of div64_64.  do_div() already does optimization
for the case of 32 by 32 divide, so no need to do it here.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:27:18 -07:00
Stephen Hemminger
3927f2e8f9 [NET]: div64_64 consolidate (rev3)
Here is the current version of the 64 bit divide common code.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:23:33 -07:00
Dmitriy Monakhov
9e993efb0d kobject: new_device->kref wasn't putted after error in kobject_move()
If error happen we jump to "out" label, in this case new_device not yet
became the parent but it wasn't putted.

Signed-off-by: Monakhov Dmitriy <dmonakhov@openvz.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-09 15:32:58 -08:00
Tony Luck
25667d6754 Revert "[IA64] swiotlb abstraction (e.g. for Xen)"
This reverts commit 51099005ab.
2007-03-06 13:31:45 -08:00
Randy Dunlap
05fb6bf0b2 [PATCH] kernel-doc fixes for 2.6.20-git15 (non-drivers)
Fix kernel-doc warnings in 2.6.20-git15 (lib/, mm/, kernel/, include/).

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-01 14:53:37 -08:00
Andrew Morton
96c62d51cc [PATCH] genalloc warning fixes
lib/genalloc.c: In function 'gen_pool_alloc':
lib/genalloc.c:151: warning: passing argument 2 of '__set_bit' from incompatible pointer type
lib/genalloc.c: In function 'gen_pool_free':
lib/genalloc.c:190: warning: passing argument 2 of '__clear_bit' from incompatible pointer type

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20 17:10:15 -08:00
Akinobu Mita
1df49008f4 [PATCH] fault injection: split up stacktrace filter Kconfig option
There is no prompt for CONFIG_STACKTRACE, so FAULT_INJECTION cannot be
selected without LOCKDEP enabled.  (found by Paolo 'Blaisorblade'
Giarrusso)

In order to fix such broken Kconfig dependency, this patch splits up the
stacktrace filter support for fault injection by new Kconfig option, which
enables to use fault injection on the architecture which doesn't have
general stacktrace support.

Cc: "Paolo 'Blaisorblade' Giarrusso" <blaisorblade@yahoo.it>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20 17:10:14 -08:00
Christoph Lameter
53b8a315b7 [PATCH] Convert highest_possible_processor_id to nr_cpu_ids
We frequently need the maximum number of possible processors in order to
allocate arrays for all processors.  So far this was done using
highest_possible_processor_id().  However, we do need the number of
processors not the highest id.  Moreover the number was so far dynamically
calculated on each invokation.  The number of possible processors does not
change when the system is running.  We can therefore calculate that number
once.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Frederik Deweerdt <frederik.deweerdt@gmail.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20 17:10:13 -08:00
Linus Torvalds
874ff01bd9 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: (25 commits)
  Documentation/kernel-docs.txt update.
  arch/cris: typo in KERN_INFO
  Storage class should be before const qualifier
  kernel/printk.c: comment fix
  update I/O sched Kconfig help texts - CFQ is now default, not AS.
  Remove duplicate listing of Cris arch from README
  kbuild: more doc. cleanups
  doc: make doc. for maxcpus= more visible
  drivers/net/eexpress.c: remove duplicate comment
  add a help text for BLK_DEV_GENERIC
  correct a dead URL in the IP_MULTICAST help text
  fix the BAYCOM_SER_HDX help text
  fix SCSI_SCAN_ASYNC help text
  trivial documentation patch for platform.txt
  Fix typos concerning hierarchy
  Fix comment typo "spin_lock_irqrestore".
  Fix misspellings of "agressive".
  drivers/scsi/a100u2w.c: trivial typo patch
  Correct trivial typo in log2.h.
  Remove useless FIND_FIRST_BIT() macro from cardbus.c.
  ...
2007-02-19 13:29:02 -08:00
Linus Torvalds
733abe4fff Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6:
  PCI: Make PCI device numa-node attribute visible in sysfs
  PCI: add systems for automatic breadth-first device sorting
  PCI: PCI devices get assigned redundant IRQs
  PCI: Make CARDBUS_MEM_SIZE and CARDBUS_IO_SIZE boot options
  PCI: pci.txt fix __devexit() usage
  PCI/sysfs/kobject kernel-doc fixes
2007-02-19 12:59:55 -08:00
Robert P. J. Day
d08df601a3 Various typo fixes.
Correct mis-spellings of "algorithm", "appear", "consistent" and
(shame, shame) "kernel".

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-02-17 19:07:33 +01:00
Randy Dunlap
f95d882d81 PCI/sysfs/kobject kernel-doc fixes
Fix kernel-doc warnings in PCI, sysfs, and kobject files.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-16 15:30:10 -08:00
Martin Stoilov
1350770112 kobject: kobj->k_name verification fix
The function 'kobject_add' tries to verify the name of
a new kobject instance is properly set before continuing.
    if (!kobj->k_name)
        kobj->k_name = kobj->name;
    if (!kobj->k_name) {
        pr_debug("kobject attempted to be registered with no name!\n");
        WARN_ON(1);
        return -EINVAL;
    }
The statement:
    if (!kobj->k_name) {
        pr_debug("kobject attempted to be registered with no name!\n");
        WARN_ON(1);
        return -EINVAL;
    }
is useless the way it is right now, because it can never be true. I
think the
code was intended to be:
    if (!kobj->k_name)
        kobj->k_name = kobj->name;
    if (!*kobj->k_name) {
        pr_debug("kobject attempted to be registered with no name!\n");
        WARN_ON(1);
        return -EINVAL;
    }
because this would make sure the kobj->name buffer has something in it.
So the missing '*' is just a typo. Although, I would much prefer
expression like:
    if (*kobj->k_name == '\0') {
        pr_debug("kobject attempted to be registered with no name!\n");
        WARN_ON(1);
        return -EINVAL;
    }

because this would've made the intention clear, in this patch I just restore
the missing '*' without changing the coding style of the function.

Signed-off-by: Martin Stoilov <mstoilov@odesys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-16 15:19:17 -08:00
Ingo Molnar
82f67cd9fc [PATCH] Add debugging feature /proc/timer_stat
Add /proc/timer_stats support: debugging feature to profile timer expiration.
Both the starting site, process/PID and the expiration function is captured.
This allows the quick identification of timer event sources in a system.

Sample output:

# echo 1 > /proc/timer_stats
# cat /proc/timer_stats
Timer Stats Version: v0.1
Sample period: 4.010 s
  24,     0 swapper          hrtimer_stop_sched_tick (hrtimer_sched_tick)
  11,     0 swapper          sk_reset_timer (tcp_delack_timer)
   6,     0 swapper          hrtimer_stop_sched_tick (hrtimer_sched_tick)
   2,     1 swapper          queue_delayed_work_on (delayed_work_timer_fn)
  17,     0 swapper          hrtimer_restart_sched_tick (hrtimer_sched_tick)
   2,     1 swapper          queue_delayed_work_on (delayed_work_timer_fn)
   4,  2050 pcscd            do_nanosleep (hrtimer_wakeup)
   5,  4179 sshd             sk_reset_timer (tcp_write_timer)
   4,  2248 yum-updatesd     schedule_timeout (process_timeout)
  18,     0 swapper          hrtimer_restart_sched_tick (hrtimer_sched_tick)
   3,     0 swapper          sk_reset_timer (tcp_delack_timer)
   1,     1 swapper          neigh_table_init_no_netlink (neigh_periodic_timer)
   2,     1 swapper          e1000_up (e1000_watchdog)
   1,     1 init             schedule_timeout (process_timeout)
100 total events, 25.24 events/sec

[ cleanups and hrtimers support from Thomas Gleixner <tglx@linutronix.de> ]
[bunk@stusta.de: nr_entries can become static]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16 08:13:59 -08:00