The patch below is a necessary workaround to support the BT On-Air USB modem, which
fails to initialise properly during normal probing thus:
Sep 30 17:34:57 sled kernel: drivers/usb/class/cdc-acm.c: Zero length descriptor references
Sep 30 17:34:57 sled kernel: cdc_acm: probe of 1-1.2:1.0 failed with error -22
Adding the patch below causes the probing section to be skipped, and the modem
then initialises correctly.
Signed-off-by: Chris Malley <mail@chrismalley.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Adds support for the verizon wireless Broadband Access, National Access V640
ExpressCard34 Qualcomm 3G CDMA.
Reported by Maciej A. __enczykowski <maze@google.com>
Signed-off-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
this patch converts two if () BUG(); construct to BUG_ON();
which occupies less space, uses unlikely and is safer when
BUG() is disabled.
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Acked-by: "Ping Cheng" <pingc@wacom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This fixes some issues with the current wacom driver due to the split of
the driver into different pieces and adds support for the Intuos3 4x6
Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Missed one piece of ia64 fallout from the global IRQ patch
7d12e780e0
Perfmon interrupt handler needs to use get_irq_regs() too.
Acked-by: stephane eranian <eranian@hpl.hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
This reverts 26f953fd88 which caused
resume problems on the mac mini.
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This reverts earlier change that attempted to fix flow control.
Device needs to discard pause frames, otherwise it hangs after a while.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
When using flow control, the PHY needs to accept multicast pause frames.
Without this fix, these frames were getting discarded by the PHY before
doing any flow control.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Under high load it is possible to make the receiver FIFO get overloaded.
The driver/hardware recover properly, so there is no reason to fill the log
with lots of extra messages, just update counter.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
The result of flow control negotiation should not limit the next
negotiatition. If board is plugged into an old half duplex 10Mbit port,
without pause, then replugged into a gigabit port, it should negotiate
what is desired, not inherit that last negotiation.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
The result of duplex negotiation is avaliable in the phy status
register, so use that to simplify code and avoid rereading the PHY.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
When PHY is turned off on shutdown, it causes the IRQ to get stuck on.
Make sure and disable the IRQ first, and if IRQ occurs when device
is not running, don't access PHY because that will hang.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
The workaround timer is not needed in most systems with proper IRQ
routing and by perodically waking up it adds to laptop power consumption.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Some motherboards don't implement MSI correctly. The driver handles this
but the warning is too verbose and overly cautious.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
[POWERPC] Check for offline nodes in pci NUMA code
[POWERPC] Better check in show_instructions
[POWERPC] POWER6 has 6 PMCs
[POWERPC] Never panic when taking altivec exceptions from userspace
[POWERPC] Fix IO Window Updates on P2P bridges.
[POWERPC] Add Makefile entry for MPC832x_mds support
[POWERPC] Fix MPC8360EMDS PB board support
[POWERPC] ppc: Add missing calls to set_irq_regs
[POWERPC] Off-by-one in /arch/ppc/platforms/mpc8*
[POWERPC] Add DOS partition table support to mpc834x_itx_defconfig
[POWERPC] spufs: fix support for read/write on cntl
[POWERPC] Don't crash on cell with 2 BEs when !CONFIG_NUMA
Most of the ISDN ->readstat() implementations needed to check
copy_to_user() and put_user() return values.
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Cc: Karsten Keil <kkeil@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This is a particularly ugly on-failure bug, possibly security, since the
lack of error handling here is covering up another class of bug: failure to
handle copy_to_user() return values.
The I4L API function ->readstat() returns an integer, and by looking at
several existing driver implementations, it is clear that a negative return
value was meant to indicate an error.
Given that several drivers already return a negative value indicating an
errno-style error, the current code would blindly accept that [negative]
value as a valid amount of bytes read. Obvious damage ensues.
Correcting ->readstat() handling to properly notice errors fixes the
existing code to work correctly on error, and enables future patches to
more easily indicate errors during operation.
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Cc: Karsten Keil <kkeil@suse.de>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
With Karsten Keil <kkeil@suse.de>
save_flags()/cli() pair is replaced with spin_lock_irqsave() and
restore_flags() replaced with spin_unlock_irqrestore()
Tested compile only using allmodconfig
Signed-off-by: Amol Lad <amol@verismonetworks.com>
Acked-by: Karsten Keil <kkeil@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The use of blocking notifier by _cpu_up and _cpu_down in cpu.c has two
problem.
1/ An interaction with the workqueue notifier causes lockdep to spit a
warning.
2/ A notifier could conceivable be added or removed while _cpu_up or
_cpu_down are in process. As each notifier is called twice (prepare
then commit/abort) this could be unhealthy.
To fix to we simply take cpu_add_remove_lock while adding or removing
notifiers to/from the list.
This makes the 'blocking' usage unnecessary as all accesses to cpu_chain
are now protected by cpu_add_remove_lock. So change "blocking" to "raw" in
all relevant places. This fixes 1.
Credit: Andrew Morton
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Michal Piotrowski <michal.k.k.piotrowski@gmail.com> (reporter)
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
BUG: warning at kernel/rtmutex-debug.c:125/rt_mutex_debug_task_free() (Not tainted)
[<c04051e3>] show_trace_log_lvl+0x58/0x16a
[<c04057f0>] show_trace+0xd/0x10
[<c0405900>] dump_stack+0x19/0x1b
[<c043f03d>] rt_mutex_debug_task_free+0x35/0x6a
[<c04224c0>] free_task+0x15/0x24
[<c042378c>] copy_process+0x12bd/0x1324
[<c0423835>] do_fork+0x42/0x113
[<c04021dd>] sys_fork+0x19/0x1b
[<c0403fb7>] syscall_call+0x7/0xb
In copy_process(), dup_task_struct() also duplicates the ->pi_lock,
->pi_waiters and ->pi_blocked_on members. rt_mutex_debug_task_free()
called from free_task() validates these members. However free_task() can
be invoked before these members are reset for the new task.
Move the initialization code before the first bail that can hit free_task().
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add functions defined using ENTRY macro to the tags file.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Some people want to do crazy things like pass multiple directories as the
value of $(SUBDIRS) or $M. Mostly this kinda works, except that
Makefile.modpost constructs a modpost commandline which fails modpost's
argument parsing. This patch fixes that little wrinkle.
Signed-off-by: Greg Banks <gnb@melbourne.sgi.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Make epca fail on initialization failure instead of panic.
Cc: "Digi International, Inc" <Eng.Linux@digi.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Alan Cox <alan@redhat.com>
Acked-by: Scott Kilau <scottk@digi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
If RAM disk driver initialization fails due to blk_alloc_queue() faulure, the
gendisk structs stored in rd_disks[] will not be freed completely.
This patch resolves that memory leak case by doing alloc_disk() and
blk_alloc_queue() at the same time.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
With 64-bit resources on 32-bit platforms, the resource address might be
larger than a void*. Fix printk to work regardless of resource size.
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Handle errors thrown in disk_sysfs_symlinks(), and propagate back to
caller.
The callers and associated functions don't do a real good job of handling
kobject errors anyway (add_partition, register_disk, rescan_partitions), so
this should do until something better comes along.
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
When IO error happens on metadata buffer, buffer is freed from memory and
later fsync() is called, filesystems like ext2 fail to report EIO. We
solve the problem by introducing a pointer to associated address space into
the buffer_head. When a buffer is removed from a list of metadata buffers
associated with an address space, IO error is transferred from the buffer to
the address space, so that fsync can later report it.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
It is possible for the ->fopen callback from lockd into nfsd to find that an
answer cannot be given straight away (an upcall is needed) and so the request
has to be 'dropped', to be retried later. That error status is not currently
propagated back.
So:
Change nlm_fopen to return nlm error codes (rather than a private
protocol) and define a new nlm_drop_reply code.
Cause nlm_drop_reply to cause the rpc request to get rpc_drop_reply
when this error comes back.
Cause svc_process to drop a request which returns a status of
rpc_drop_reply.
[akpm@osdl.org: fix warning storm]
Cc: Marc Eshel <eshel@almaden.ibm.com>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
When an nfs server shuts down, lockd needs to release all the locks even
though the client still holds them.
It should therefore not 'unmonitor' the clients, so that the files in nfs/sm
will still be there when the nfs server restarts, so that those clients will
be told to reclaim their locks.
However the hosts are fully unmonitored, so statd may well remove the files.
lockd has a test for 'sm_sticky' and avoid the unmonitor call if it is set,
but it is currently not set.
So set it when tearing down lockd.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Coverity noticed that the error handling code in the NFSv4 callback client
sets cb->cb_client to NULL, then calls rpc_shutdown_client with the NULL
pointer.
Coverity: #cid 1397
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
We weren't actually checking for SHARE_ACCESS_WRITE, with the result that the
owner could open a non-writeable file for write!
Continue to allow DENY_WRITE only with write access.
Thanks to Jim Rees for reporting the bug.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
If a client creates a file using an open which sets the mode to 000, or if a
chmod changes permissions after a file is opened, then situations may arise
where an NFS client knows that some IO is permitted (because a process holds
the file open), but the NFS server does not (because it doesn't know about the
open, and only sees that the IO conflicts with the current mode of the file).
As a hack to solve this problem, NFS servers normally allow the owner to
override permissions on IO. The client can still enforce correct
permissions-checking on open by performing an explicit access check.
In NFSv4 the client can rely on the explicit on-the-wire open instead of an
access check.
Therefore we should not be allowing the owner to override permissions on an
over-the-wire open!
However, we should still allow the owner to override permissions in the case
where the client is claiming an open that it already made either before a
reboot, or while it was holding a delegation.
Thanks to Jim Rees for reporting the bug.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
There's no locking for ->d_revalidate, so fuse_dentry_revalidate() should use
dget_parent() instead of simply dereferencing ->d_parent.
Due to topology changes in the directory tree the parent could become negative
or be destroyed while being used. There hasn't been any reports about this
yet.
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Fuse considered it an error (EIO) if lookup returned a directory inode, to
which a dentry already refered. This is because directory aliases are not
allowed.
But in a network filesystem this could happen legitimately, if a directory is
moved on a remote client. This patch attempts to relax the restriction by
trying to first evict the offending alias from the cache. If this fails, it
still returns an error (EBUSY).
A rarer situation is if an mkdir races with an indenpendent lookup, which
finds the newly created directory already moved. In this situation the mkdir
should return success, but that would be incorrect, since the dentry cannot be
instantiated, so return EBUSY.
Previously checking for a directory alias and instantiation of the dentry
weren't done atomically in lookup/mkdir, hence two such calls racing with each
other could create aliased directories. To prevent this introduce a new
per-connection mutex: fuse_conn->inst_mutex, which is taken for instantiations
with a directory inode.
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Fix a spurious BUG in an unlikely race, where at least three parallel lookups
return the same inode, but with different file type. This has not yet been
observed in real life.
Allowing unlimited retries could delay fuse_iget() indefinitely, but this is
really for the broken userspace filesystem to worry about.
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
An inode could be returned by independent parallel lookups, in this case an
update of the lookup counter could be lost resulting in a memory leak in
userspace.
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Unless someone reads the documentation for write_seqcount_{begin,end} it is
not obvious, that i_size_write() needs locking. Especially, that lack of such
locking can result in a system hang.
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Fuse didn't always call i_size_write() with i_mutex held which caused rare
hangs on SMP/32bit. This bug has been present since fuse-2.2, well before
being merged into mainline.
The simplest solution is to protect i_size_write() with the per-connection
spinlock. Using i_mutex for this purpose would require some restructuring of
the code and I'm not even sure it's always safe to acquire i_mutex in all
places i_size needs to be set.
Since most of vmtruncate is already duplicated for other reasons, duplicate
the remaining part as well, making all i_size_write() calls internal to fuse.
Using i_size_write() was unnecessary in fuse_init_inode(), since this function
is only called on a newly created locked inode.
Reported by a few people over the years, but special thanks to Dana Henriksen
who was persistent enough in helping me debug it.
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
