* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
[CPUFREQ] powernow-k8: Get transition latency from ACPI _PSS table
[CPUFREQ] Make ignore_nice_load setting of ondemand work as expected.
to prevent wrongly overwriting fixmap that still want to use.
ACPI used to rely on low mappings being all linearly mapped and
grew a habit: it never really unmapped certain kinds of tables
after use.
This can cause problems - for example the hypothetical case
when some spurious access still references it.
v2: remove prev_map and prev_size in __apci_map_table
v3: let acpi_os_unmap_memory() call early_iounmap too, so remove extral calling to
early_acpi_os_unmap_memory
v4: fix typo in one acpi_get_table_with_size calling
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Acked-by: Len Brown <len.brown@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
On x86, __acpi_map_table uses early_ioremap() to create the mapping,
replacing the previous mapping with a new one. Once enough of the
kernel is up an running it switches to using normal ioremap(). At
that point, we need to clean up the final mapping to avoid a warning
from the early_ioremap subsystem.
This can be removed after all the instances in the ACPI code are fixed
that rely on early-ioremap's implicit overmapping of previously
mapped tables.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Acked-by: Len Brown <len.brown@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Always map acpi tables, rather than assuming we can use the normal
linear mapping to access the acpi tables. This is necessary in a
virtual environment where the linear mappings are to pseudo-physical
memory, but the acpi tables exist at a real physical address. It
doesn't hurt to map in the normal non-virtual case, so just do it
unconditionally.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Acked-by: Len Brown <len.brown@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
__acpi_map_table() effectively reimplements early_ioremap(). Rather
than have that duplication, just implement it in terms of
early_ioremap().
However, unlike early_ioremap(), __acpi_map_table() just maintains a
single mapping which gets replaced each call, and has no corresponding
unmap function. Implement this by just removing the previous mapping
each time its called. Unfortunately, this will leave a stray mapping
at the end.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Commit 6194ba6ff6 ("x86: don't special-case
pmd allocations as much") made changes to the way we handle pmd allocations,
and while doing that it dropped a call to paravirt_release_pd on the
pgd page from the pgd_dtor code path.
As a result of this missing release, the hypervisor is now unaware of the
pgd page being freed, and as a result it ends up tracking this page as a
page table page.
After this the guest may start using the same page for other purposes, and
depending on what use the page is put to, it may result in various performance
and/or functional issues ( hangs, reboots).
Since this release is only required for VMI, I now release the pgd page from
the (vmi)_pgd_free hook.
Signed-off-by: Alok N Kataria <akataria@vmware.com>
Acked-by: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: <stable@kernel.org>
Impact: find right nr_irqs_gsi on some systems.
One test-system has gap between gsi's:
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfeafd000] gsi_base[48])
[ 0.000000] IOAPIC[1]: apic_id 5, version 0, address 0xfeafd000, GSI 48-54
[ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfeafc000] gsi_base[56])
[ 0.000000] IOAPIC[2]: apic_id 6, version 0, address 0xfeafc000, GSI 56-62
...
[ 0.000000] nr_irqs_gsi: 38
So nr_irqs_gsi is not right. some irq for MSI will overwrite with io_apic.
need to get that with acpi_probe_gsi when acpi io_apic is used
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
With the differences in interrupt handling hoisted into handle_irq(),
do_IRQ is more or less identical between 32 and 64 bit, so unify it.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Xen uses a different interrupt path, so introduce handle_irq() to
allow interrupts to be inserted into the normal interrupt path. This
is handled slightly differently on 32 and 64-bit.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
arch/x86/kernel/early_printk.c: In function ‘early_dbgp_init’:
arch/x86/kernel/early_printk.c:827: error: ‘PAGE_KERNEL_NOCACHE’ undeclared (first use in this function)
arch/x86/kernel/early_printk.c:827: error: (Each undeclared identifier is reported only once
arch/x86/kernel/early_printk.c:827: error: for each function it appears in.)
Signed-off-by: Ingo Molnar <mingo@elte.hu>
For Intel 7400 series CPUs, the recommendation is to use a clflush on the
monitored address just before monitor and mwait pair [1].
This clflush makes sure that there are no false wakeups from mwait when the
monitored address was recently written to.
[1] "MONITOR/MWAIT Recommendations for Intel Xeon Processor 7400 series"
section in specification update document of 7400 series
http://download.intel.com/design/xeon/specupdt/32033601.pdf
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup and bug fix
Use the linker to create symbols for certain per-cpu variables
that are offset by __per_cpu_load. This allows the removal of
the runtime fixup of the GDT pointer, which fixes a bug with
resume reported by Jiri Slaby.
Reported-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Acked-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Without frame pointers enabled, the x86 stack traces should not
pretend to be reliable; instead they should just be what they are:
unreliable.
The effect of this is that they have a '?' printed in the stacktrace,
to warn the reader that these entries are guesses rather than known
based on more reliable information.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: find right nr_irqs_gsi on some systems.
One test-system has gap between gsi's:
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfeafd000] gsi_base[48])
[ 0.000000] IOAPIC[1]: apic_id 5, version 0, address 0xfeafd000, GSI 48-54
[ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfeafc000] gsi_base[56])
[ 0.000000] IOAPIC[2]: apic_id 6, version 0, address 0xfeafc000, GSI 56-62
...
[ 0.000000] nr_irqs_gsi: 38
So nr_irqs_gsi is not right. some irq for MSI will overwrite with io_apic.
need to get that with acpi_probe_gsi when acpi io_apic is used
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: make check-timer more robust potentially solve boot fragility
For edge trigger io-apic routing, we already unmasked the pin via
setup_IO_APIC_irq(), so don't unmask it again.
Also call local_irq_disable() between timer_irq_works(), because it
calls local_irq_enable() inside.
Also remove not needed apic version reading for 64-bit
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: make nr_irqs depend more on cards used in a system
depend on nr_irq_gsi more, and have a ratio for MSI.
v2: make nr_irqs less than NR_VECTORS * nr_cpu_ids
aka if only one cpu, we only can support nr_irqs = NR_VECTORS
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fix compile problem:
CC arch/x86/kernel/early_printk.o
In file included from /home/jeremy/hg/xen/paravirt/linux/arch/x86/kernel/early_printk.c:17:
/home/jeremy/hg/xen/paravirt/linux/arch/x86/include/asm/pgtable.h: In function 'pmd_page':
/home/jeremy/hg/xen/paravirt/linux/arch/x86/include/asm/pgtable.h:516: error: implicit declaration of function '__pfn_to_section'
/home/jeremy/hg/xen/paravirt/linux/arch/x86/include/asm/pgtable.h:516: warning: initialization makes pointer from integer without a cast
/home/jeremy/hg/xen/paravirt/linux/arch/x86/include/asm/pgtable.h:516: error: implicit declaration of function '__section_mem_map_addr'
/home/jeremy/hg/xen/paravirt/linux/arch/x86/include/asm/pgtable.h:516: warning: return makes pointer from integer without a cast
/home/jeremy/hg/xen/paravirt/linux/arch/x86/include/asm/pgtable.h: In function 'pud_page':
/home/jeremy/hg/xen/paravirt/linux/arch/x86/include/asm/pgtable.h:586: warning: initialization makes pointer from integer without a cast
/home/jeremy/hg/xen/paravirt/linux/arch/x86/include/asm/pgtable.h:586: warning: return makes pointer from integer without a cast
/home/jeremy/hg/xen/paravirt/linux/arch/x86/include/asm/pgtable.h: In function 'pgd_page':
/home/jeremy/hg/xen/paravirt/linux/arch/x86/include/asm/pgtable.h:625: warning: initialization makes pointer from integer without a cast
/home/jeremy/hg/xen/paravirt/linux/arch/x86/include/asm/pgtable.h:625: warning: return makes pointer from integer without a cast
This is a cycling dependency between asm/pgtable.h and linux/mmzone.h
when using CONFIG_SPARSEMEM. Rather than hacking up the headers some
more, remove asm/pgtable.h, since early_printk.c doesn't actually need
it.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Implement Linus's suggestion: introduce the hpet_cnt_ahead()
helper function to compare hpet time values - like other
wrapping counter comparisons are abstracted away elsewhere.
(jiffies, ktime_t, etc.)
Reported-by: Kirill Korotaev <dev@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
only leave _default_ipi_xx etc in .h
Beyond the cleanup factor, this saves a bit of code size as well:
text data bss dec hex filename
7281931 1630144 1463304 10375379 9e50d3 vmlinux.before
7281753 1630144 1463304 10375201 9e5021 vmlinux.after
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
disable_ioapic_setup() in init/main.c is ugly as the function is
x86-specific. The #ifdef inline prototype there is ugly too.
Replace it with a generic arch_disable_smp_support() function - which
has a weak alias for non-x86 architectures and for non-ioapic x86 builds.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
At this time, the PowerNow! driver for K8 uses an experimentally
derived formula to calculate transition latency. The value it
provides is orders of magnitude too large on modern systems.
This patch replaces the formula with ACPI _PSS latency values
for more accuracy and better performance.
I've tested it on two 2nd generation Opteron systems, a 3rd
generation Operton system, and a Turion X2 without seeing any
stability problems.
Signed-off-by: Mark Langsdorf <mark.langsdorf@amd.com>
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Dave Jones <davej@redhat.com>
There's a small problem with hpet_rtc_reinit function - it checks
for the:
hpet_readl(HPET_COUNTER) - hpet_t1_cmp > 0
to continue increasing both the HPET_T1_CMP (register) and the
hpet_t1_cmp (variable).
But since the HPET_COUNTER is always 32-bit, if the hpet_t1_cmp
is 64-bit this condition will always be FALSE once the latter hits
the 32-bit boundary, and we can have a situation, when we don't
increase the HPET_T1_CMP register high enough.
The result - timer stops ticking, since HPET_T1_CMP becomes less,
than the COUNTER and never increased again.
The solution is (based on Linus's suggestion) to not compare 64-bits
(on 64-bit x86), but to do the comparison on 32-bit signed
integers.
Reported-by: Kirill Korotaev <dev@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch echoes what we already do on 32-bit since
90f7d25c6b, and prints the DMI
product name in show_regs, so that system specific problems can be
easily identified.
Signed-off-by: Kyle McMartin <kyle@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
They were long enough set deprecated...
Update Documentation/cpu-freq/users-guide.txt:
The deprecated files listed there seen not to exist for some time anymore
already.
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
Impact: reduce kernel BSS size by 7 pages, improve code readability
Two page tables are used in current x86_64 kexec implementation. One
is used to jump from kernel virtual address to identity map address,
the other is used to map all physical memory. In fact, on x86_64,
there is no conflict between kernel virtual address space and physical
memory space, so just one page table is sufficient. The page table
pages used to map control page are dynamically allocated to save
memory if kexec image is not loaded. ASM code used to map control page
is replaced by C code too.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Impact: fix to enable APIC for AMD Fam10h on chipsets with a missing/b0rked
ACPI MP table (MADT)
Booting a 32bit kernel on an AMD Fam10h CPU running on chipsets with
missing/b0rked MP table leads to a hang pretty early in the boot process
due to the APIC not being initialized. Fix that by falling back to the
default APIC base address in 32bit code, as it is done in the 64bit
codepath.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Impact: Fixes dumpstack and KDB on 64 bits
This re-adds the old stack pointer to the top of the irqstack to help
with unwinding. It was removed in commit d99015b1ab
as part of the save_args out-of-line work.
Both dumpstack and KDB require this information.
Signed-off-by: Martin Hicks <mort@sgi.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Zach says:
> Enable/Disable have no clobbers at all.
> Save clobbers only return value, %eax
> Restore also clobbers nothing.
This is precisely compatible with the calling convention, so we can
just call them directly without wrapping.
(Compile tested only.)
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Eric Paris reported:
> I have an hp dl785g5 which is unable to successfully run
> 2.6.29-0.66.rc3.fc11.x86_64 or 2.6.29-rc2-next-20090126. During bootup
> (early in userspace daemons starting) I get the below BUG, which quickly
> renders the machine dead. I assume it is because sparse_irq_lock never
> gets released when the BUG kills that task.
Adjust lock sequence when migrating a descriptor with
CONFIG_NUMA_MIGRATE_IRQ_DESC enabled.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, ds, bts: cleanup/fix DS configuration
ring-buffer: reset timestamps when ring buffer is reset
trace: set max latency variable to zero on default
trace: stop all recording to ring buffer on ftrace_dump
trace: print ftrace_dump at KERN_EMERG log level
ring_buffer: reset write when reserve buffer fail
tracing/function-graph-tracer: fix a regression while suspend to disk
ring-buffer: fix alignment problem
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86 setup: fix asm constraints in vesa_store_edid
xen: make sysfs files behave as their names suggest
x86: tone down mtrr_trim_uncached_memory() warning
x86: correct the CPUID pattern for MSR_IA32_MISC_ENABLE availability
[
mingo@elte.hu: these fixes are a subset of changes cherry-picked from:
git://git.kernel.org:/pub/scm/linux/kernel/git/jejb/voyager-2.6.git
They fix various problems that recent x86 changes caused in the Voyager
subarchitecture: both APIC changes and cpumask changes and certain
cleanups caused subarch assumptions to break.
Most of these changes are obsolete as the subarch code has been removed
from the x86 development tree - but we merge them upstream to make Voyager
build and boot.
]
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: split out a function, no functional change
Xen needs to be able to access percpu data from very early on. For
various reasons, it cannot also load the gdt at that time. It does,
however, have a pefectly functional gdt at that point, so there's no
pressing need to reload the gdt.
Split the function to load the segment registers off, so Xen can call
it directly.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Impact: cleanup, prepare for xen boot fix.
Xen needs to call this function very early to setup the GDT and
per-cpu segments. Remove the call to smp_processor_id() and just
pass in the cpu number.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Impact: fix possible tlb mis-flushing on UV
uv_flush_send_and_wait() should return a pointer if the broadcast
remote tlb shootdown requests fail. That causes the conventional IPI
method of shootdown to be used.
Signed-off-by: Cliff Wickman <cpw@sgi.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Impact: Optimization
In the native case, pte_val, make_pte, etc are all just identity
functions, so there's no need to clobber a lot of registers over them.
(This changes the 32-bit callee-save calling convention to return both
EAX and EDX so functions can return 64-bit values.)
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Impact: Optimization
One of the problems with inserting a pile of C calls where previously
there were none is that the register pressure is greatly increased.
The C calling convention says that the caller must expect a certain
set of registers may be trashed by the callee, and that the callee can
use those registers without restriction. This includes the function
argument registers, and several others.
This patch seeks to alleviate this pressure by introducing wrapper
thunks that will do the register saving/restoring, so that the
callsite doesn't need to worry about it, but the callee function can
be conventional compiler-generated code. In many cases (particularly
performance-sensitive cases) the callee will be in assembler anyway,
and need not use the compiler's calling convention.
Standard calling convention is:
arguments return scratch
x86-32 eax edx ecx eax ?
x86-64 rdi rsi rdx rcx rax r8 r9 r10 r11
The thunk preserves all argument and scratch registers. The return
register is not preserved, and is available as a scratch register for
unwrapped callee code (and of course the return value).
Wrapped function pointers are themselves wrapped in a struct
paravirt_callee_save structure, in order to get some warning from the
compiler when functions with mismatched calling conventions are used.
The most common paravirt ops, both statically and dynamically, are
interrupt enable/disable/save/restore, so handle them first. This is
particularly easy since their calls are handled specially anyway.
XXX Deal with VMI. What's their calling convention?
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Impact: Fix latent bug
The clobber is trying to say that anything except RDI is available for
clobbering, but actually clobbers everything. This hasn't mattered
because the clobbers were basically ignored, but subsequent patches
will rely on them.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Impact: Optimization
Several paravirt ops implementations simply return their arguments,
the most obvious being the make_pte/pte_val class of operations on
native.
On 32-bit, the identity function is literally a no-op, as the calling
convention uses the same registers for the first argument and return.
On 64-bit, it can be implemented with a single "mov".
This patch adds special identity functions for 32 and 64 bit argument,
and machinery to recognize them and replace them with either nops or a
mov as appropriate.
At the moment, the only users for the identity functions are the
pagetable entry conversion functions.
The result is a measureable improvement on pagetable-heavy benchmarks
(2-3%, reducing the pvops overhead from 5 to 2%).
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Impact: fix rare crash on 32-bit
The 32-bit APIC drivers had their send_IPI_self vectors set to NULL,
but ioapic_retrigger_irq() depends on it being always set. Fix it.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
just like 64 bit switch from flat logical APIC messages to
flat physical mode automatically.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: 32-bit should use logical version
there are two version: for default_send_IPI_mask_sequence/allbutself
one in ipi.h and one in ipi.c for 32bit
it seems .h version overwrote ipi.c for a while.
restore it so 32 bit could use its old logical version.
also remove dupicated functions in .c
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Move DMA-mapping.txt to Documentation/PCI/.
DMA-mapping.txt was supposed to be moved from Documentation/ to
Documentation/PCI/. The 00-INDEX files in those two directories
were updated, along with a few other text files, but the file
itself somehow escaped being moved, so move it and update more
text files and source files with its new location.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Impact: Cleans up printk formatting
When LOCAL APIC was calibrated, the debug message is displayed as follows.
CPU0: Intel(R) Xeon(R) CPU 5110 @ 1.60GHz stepping 06
Using local APIC timer interrupts.
calibrating APIC timer ...
... lapic delta = 3773131
... PM timer delta = 812434
APIC calibration not consistent with PM Timer: 226ms instead of 100ms
APIC delta adjusted to PM-Timer: 1662420 (3773131)
TSC delta adjusted to PM-Timer: 159592409 (362220564)
..... delta 1662420
..... mult: 71411249
..... calibration result: 265987
..... CPU clock speed is 1595.0924 MHz.
..... host bus clock speed is 265.0987 MHz.
There are three type of PM-Timer (PM-Timer, PM Timer, and PM timer),
in this message. This patch unifies those messages to PM-Timer.
Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Impact: Fixes incorrect printk
LOCAL APIC is corrected by PM-Timer, when SMI occurred while LOCAL APIC is calibrated.
In this case, LOCAL APIC debug message(Boot with apic=debug) is displayed correctly,
however, CPU clock speed debug message is displayed wrongly .
When SMI occured on my machine, which has 1.6GHz CPU, CPU clock speed is displayed
3622.0205 MHz as follow.
CPU0: Intel(R) Xeon(R) CPU 5110 @ 1.60GHz stepping 06
Using local APIC timer interrupts.
calibrating APIC timer ...
... lapic delta = 3773130
... PM timer delta = 812434
APIC calibration not consistent with PM Timer: 226ms instead of 100ms
APIC delta adjusted to PM-Timer: 1662420 (3773130)
..... delta 1662420
..... mult: 71411249
..... calibration result: 265987
..... CPU clock speed is 3622.0205 MHz. =====> here
..... host bus clock speed is 265.0987 MHz.
This patch fixes to displaying CPU clock speed correctly as follow.
CPU0: Intel(R) Xeon(R) CPU 5110 @ 1.60GHz stepping 06
Using local APIC timer interrupts.
calibrating APIC timer ...
... lapic delta = 3773131
... PM timer delta = 812434
APIC calibration not consistent with PM Timer: 226ms instead of 100ms
APIC delta adjusted to PM-Timer: 1662420 (3773131)
TSC delta adjusted to PM-Timer: 159592409 (362220564)
..... delta 1662420
..... mult: 71411249
..... calibration result: 265987
..... CPU clock speed is 1595.0924 MHz.
..... host bus clock speed is 265.0987 MHz.
Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
X86_PC is the only remaining 'sub' architecture, so we dont need
it anymore.
This also cleans up a few spurious references to X86_PC in the
driver space - those certainly should be X86.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
xapic fix for 32bit platform with less than 8 cpu's.
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
We may use macros from processor-flags.h instead
of hardcoding bits. Actually it's not direct mapping
of old instructions with new ones -- BTS does change
CF flag while MOV does not. But i didn't find any
dependency on CF in this code.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Acked-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
X86_GENERICARCH is a misnomer - it contains non-PC 32-bit architectures
that are not included in the default build.
Rename it to X86_32_NON_STANDARD.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
x86/Voyager had this Kconfig quirk:
config X86_FIND_SMP_CONFIG
def_bool y
depends on X86_MPPARSE || X86_VOYAGER
Which splits off the find_smp_config() callback into a build-time quirk.
Voyager should use the existing x86_quirks.mach_find_smp_config() callback
to introduce SMP-config quirks. NUMAQ-32 and VISWS already use this.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Voyager has this Kconfig quirk:
config X86_BIOS_REBOOT
bool
depends on !X86_VOYAGER
default y
Voyager should use the existing machine_ops.emergency_restart reboot
quirk mechanism instead of a build-time quirk.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
x86/Voyager can boot on non-zero processors. While that can probably
be fixed by properly remapping the physical CPU IDs, keep boot_cpu_id
for now for easier transition - and expand it to all of x86.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The x86/Voyager subarch used to have this distinction between
'x86 SMP support' and 'Voyager SMP support':
config X86_SMP
bool
depends on SMP && ((X86_32 && !X86_VOYAGER) || X86_64)
This is a pointless distinction - Voyager can (and already does) use
smp_ops to implement various SMP quirks it has - and it can be extended
more to cover all the specialities of Voyager.
So remove this complication in the Kconfig space.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Remove the 32-bit subarchitecture support code.
All subarchitectures but Voyager have been converted. Voyager will be
done later or will be removed.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We are getting rid of subarchitecture support - move the hook files
to asm/. (These are now stale and should be replaced with more explicit
runtime mechanisms - but the transition is simpler this way.)
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Remove remaining bits of the subarchitecture code. Now that all the
special platforms are runtime probed and runtime handled, we can remove
these facilities.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Move all code to arch/x86/kernel/bigsmp_32.c.
With this it ceases to rely on any build-time subarch features.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Move all NUMAQ code into arch/x86/kernel/numaq.c.
With this it ceases to rely on any build-time subarch features.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Move all ES7000 code into arch/x86/kernel/es7000_32.c.
With this it ceases to rely on any build-time subarch features.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
kerneloops.org is reporting a lot of these warnings that come due to
vmware not setting up any MTRRs for emulated CPUs:
| Reported 709 times (14696 total reports)
| BIOS bug (often in VMWare) where the MTRR's are set up incorrectly
| or not at all
|
| This warning was last seen in version 2.6.29-rc2-git1, and first
| seen in 2.6.24.
|
| More info:
| http://www.kerneloops.org/searchweek.php?search=mtrr_trim_uncached_memory
Keep a one-liner KERN_INFO about it - so that we have so notice if empty
MTRRs are caused by native hardware/BIOS weirdness.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Nothing exciting - a few subarches dont want APIC remote reads to
be performed - the others are content with the default method.
- extend the generic code to handle NULL methods
- clear out dummy methods and replace them with NULL
- clean up: remove wrapper macros, etc.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Only NUMAQ does something substantial here, because it initializes
via NMIs (not via INIT as standard SMP startup) - so it needs to
store and restore the NMI vector.
- extend the generic code to handle NULL methods
- clear out dummy methods and replace them with NULL
- clean up: remove wrapper macros, etc.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Only NUMAQ does something substantial here, because it initializes
via NMIs (not via INIT as standard SMP startup) - so it needs to
reset the APIC.
- extend the generic code to handle NULL methods
- clear out dummy methods and replace them with NULL
- clean up: remove wrapper macros, etc.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
- spread out the namespace on a per APIC driver basis
- handle a NULL ->wait_for_init_deassert() as a 'dont wait' default method
- remove NUMAQ and Summit handlers
Signed-off-by: Ingo Molnar <mingo@elte.hu>
64-bit x86 has zero for ->trampoline_phys_low/high, but the smpboot
code can use these values - so it's better to set them up to their
correct values.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Our send_IPI_*() methods and definitions are a twisted mess: the same
symbol is defined to different things depending on .config details,
in a non-transparent way.
- spread out the quirks into separately named per apic driver methods
- prefix the standard PC methods with default_
- get rid of wrapper macro obfuscation
- clean up various details
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Call all the registered MPS quirk handlers early. These methods scan
low RAM typically for specific signatures so are safe to be called
early.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Refactor the ->phys_pkg_id() methods:
- namespace separation
- macro wrapper removal
- open-coded calls to the methods in the generic code
Signed-off-by: Ingo Molnar <mingo@elte.hu>
- unify the call signature of 64-bit to that of 32-bit
- clean up the types all around
- clean up namespace contamination
Signed-off-by: Ingo Molnar <mingo@elte.hu>
- eliminate the needless es7000_enable_apic_mode() complication which
was not apparent prior the namespace cleanups
- clean up the control flow in es7000_enable_apic_mode()
- other cleanups
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Only ES7000 has a real ->enable_apic_mode() method, the other
subarchitectures define it but keep it empty.
So mark the vector as NULL, extend the generic code to handle
NULL -setup_portio_remap() entries and remove all the empty
handlers.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
- spread out the namespace to per driver methods
- extend it to 64-bit as well so that we can use
apic->check_phys_apicid_present() unconditionally
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Only NUMAQ has a real ->setup_portio_remap() method, the other
subarchitectures define it but keep it empty.
So mark the vector as NULL, extend the generic code to handle
NULL -setup_portio_remap() entries and remove all the empty
handlers.
Also move the NUMAQ method from the header file into the
apic driver .c file.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
only NUMAQ uses this quirk: to prevent the timer IRQ from being added
on secondary nodes.
All other genapic templates can have a NULL ->multi_timer_check()
callback.
Also, extend the generic code to treat a NULL pointer accordingly.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
The bigsmp and es7000 subarchitectures un-defined APIC_DEST_LOGICAL in
a rather nasty way by re-defining it to zero. That is infinitely
fragile and makes it very hard to see what to code really does in
a given context. The very same constant has different meanings and
values - depending on which subarch is enabled.
Untangle this mess by never undefining the constant, but instead
propagating the right values into the genapic driver templates.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
the ->ESR_DISABLE shouting variant was used to enable the esr_disable
macro wrappers. Those ugly macros are removed now so we can rename
->ESR_DISABLE to ->disable_esr
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
Most subarchitectures want to disable the APIC ESR (Error Status Register),
because they generally have hardware hacks that wrap standard CPUs into
a bigger system and hence the APIC bus is quite non-standard and weirdnesses
(lockups) have been seen with ESR reporting.
Remove the esr_disable macros and put the desired flag into each
subarchitecture's genapic template directly.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Remove the wrapper macros IRQ_DEST_MODE and IRQ_DELIVERY_MODE.
The typical 32-bit and the 64-bit build all dereference via the genapic,
so it's pointless to hide that indirection via these ugly macros.
Furthermore, it also obscures subarchitecture details.
So replace it with apic->irq_dest_mode / etc. accesses.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
int_delivery_mode is supposed to mean 'interrupt delivery mode', but
it's quite a misnomer as 'int' we usually think of as an integer type ...
The standard naming for such attributes is 'irq' - so rename the following
fields and macros:
int_delivery_mode => irq_delivery_mode
INT_DELIVERY_MODE => IRQ_DELIVERY_MODE
int_dest_mode => irq_dest_mode
INT_DEST_MODE => IRQ_DEST_MODE
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
x86 subarchitectures each defined a "apic_id_registered()" method,
which could be an inline function depending on which subarch we build
for, and which was also the name of a genapic field.
Untangle this namespace spaghetti by giving each of the instances
a separate name.
Also remove wrapper macro obfuscation.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: refactor code
x86 subarchitectures each defined a "acpi_madt_oem_check()" method,
which could be an inline function, or an extern, or a static function,
and which was also the name of a genapic field.
Untangle this namespace spaghetti by setting ->acpi_madt_oem_check()
to NULL on those subarchitectures that have no detection quirks,
and rename the other ones (summit, es7000) that do.
Also change default_acpi_madt_oem_check() to handle NULL entries,
and clean its control flow up as well.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
- reorder fields so that they appear in struct genapic field ordering
- add zero-initialized fields too so that it's apparent which functionality
is default / missing.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
- reorder fields so that they appear in struct genapic field ordering
- add zero-initialized fields too so that it's apparent which functionality
is default / missing.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
- reorder fields so that they appear in struct genapic field ordering
- add zero-initialized fields too so that it's apparent which functionality
is default / missing.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
- reorder fields so that they appear in struct genapic field ordering
- add zero-initialized fields too so that it's apparent which functionality
is default / missing.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
- reorder fields so that they appear in struct genapic field ordering
- add zero-initialized fields too so that it's apparent which functionality
is default / missing.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Rename genapic-> to apic-> references because in a future chagne we'll
open-code all the indirect calls (instead of obscuring them via macros),
so we want this reference to be as short as possible.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: Cleanup
While I was looking through the new and improved bootstrap code - great
work that, thanks! I found the below a slight improvement.
Remove unnecessary ugly #ifdef construct around debug register clear.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Impact: build fix
x86_cpu_to_apicid and x86_bios_cpu_apicid aren't defined for voyage.
Earlier patch forgot to conditionalize early percpu clearing. Fix it.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Impact: sync 32 and 64-bit code
Merge load_gs_base() into switch_to_new_gdt(). Load the GDT and
per-cpu state for the boot cpu when its new area is set up.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Impact: cleanup
Rename init_gdt() to setup_percpu_segment(), and move it to
setup_percpu.c.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Impact: standardize all x86 platforms on same setup code
With the preceding changes, Voyager can use the same per-cpu setup
code as all the other x86 platforms.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Impact: Small cleanup
Define BOOT_PERCPU_OFFSET and use it for this_cpu_offset and
__per_cpu_offset initializers.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Impact: Code movement
Move the variable definitions to apic.c. Ifdef the copying of
the two early per-cpu variables, since Voyager doesn't use them.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Impact: cleanup
The way the code is written, align is always PAGE_SIZE. Simplify
the code by removing the align variable.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Impact: Code movement, no functional change.
Move setup_cpu_local_masks() to kernel/cpu/common.c, where the
masks are defined.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Impact: Code movement, no functional change.
Move the 64-bit NUMA code from setup_percpu.c to numa_64.c
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Impact: minor optimization
Eliminates the need for two loops over possible cpus.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
debugobjects: add and use INIT_WORK_ON_STACK
rcu: remove duplicate CONFIG_RCU_CPU_STALL_DETECTOR
relay: fix lock imbalance in relay_late_setup_files
oprofile: fix uninitialized use of struct op_entry
rcu: move Kconfig menu
softlock: fix false panic which can occur if softlockup_thresh is reduced
rcu: add __cpuinit to rcu_init_percpu_data()
* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
hrtimers: fix inconsistent lock state on resume in hres_timers_resume
time-sched.c: tick_nohz_update_jiffies should be static
locking, hpet: annotate false positive warning
kernel/fork.c: unused variable 'ret'
itimers: remove the per-cpu-ish-ness
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (29 commits)
xen: unitialised return value in xenbus_write_transaction
x86: fix section mismatch warning
x86: unmask CPUID levels on Intel CPUs, fix
x86: work around PAGE_KERNEL_WC not getting WC in iomap_atomic_prot_pfn.
x86: use standard PIT frequency
xen: handle highmem pages correctly when shrinking a domain
x86, mm: fix pte_free()
xen: actually release memory when shrinking domain
x86: unmask CPUID levels on Intel CPUs
x86: add MSR_IA32_MISC_ENABLE bits to <asm/msr-index.h>
x86: fix PTE corruption issue while mapping RAM using /dev/mem
x86: mtrr fix debug boot parameter
x86: fix page attribute corruption with cpa()
Revert "x86: signal: change type of paramter for sys_rt_sigreturn()"
x86: use early clobbers in usercopy*.c
x86: remove kernel_physical_mapping_init() from init section
fix: crash: IP: __bitmap_intersects+0x48/0x73
cpufreq: use work_on_cpu in acpi-cpufreq.c for drv_read and drv_write
work_on_cpu: Use our own workqueue.
work_on_cpu: don't try to get_online_cpus() in work_on_cpu.
...
Impact: re-enable CPUID unmasking on affected processors
As far as I am capable of discerning from the documentation,
MSR_IA32_MISC_ENABLE should be available for all family 0xf CPUs, as
well as family 6 for model >= 0xd (newer Pentium M).
The documentation on this isn't ideal, so we need to be on the lookout
for errors, still.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Here function vmi_activate calls a init function activate_vmi , which
causes the following section mismatch warnings:
LD arch/x86/kernel/built-in.o
WARNING: arch/x86/kernel/built-in.o(.text+0x13ba9): Section mismatch
in reference from the function vmi_activate() to the function
.init.text:vmi_time_init()
The function vmi_activate() references
the function __init vmi_time_init().
This is often because vmi_activate lacks a __init
annotation or the annotation of vmi_time_init is wrong.
WARNING: arch/x86/kernel/built-in.o(.text+0x13bd1): Section mismatch
in reference from the function vmi_activate() to the function
.devinit.text:vmi_time_bsp_init()
The function vmi_activate() references
the function __devinit vmi_time_bsp_init().
This is often because vmi_activate lacks a __devinit
annotation or the annotation of vmi_time_bsp_init is wrong.
WARNING: arch/x86/kernel/built-in.o(.text+0x13bdb): Section mismatch
in reference from the function vmi_activate() to the function
.devinit.text:vmi_time_ap_init()
The function vmi_activate() references
the function __devinit vmi_time_ap_init().
This is often because vmi_activate lacks a __devinit
annotation or the annotation of vmi_time_ap_init is wrong.
Fix it by marking vmi_activate() as __init too.
Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
Remove such constructs:
#ifdef CONFIG_EARLY_PRINTK
call early_printk
#else
call printk
#endif
Not only are they ugly, they are also pointless: a call to printk()
maps to early_printk during early bootup anyway, if CONFIG_EARLY_PRINTK
is enabled.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix boot hang on pre-model-15 Intel CPUs
rdmsrl_safe() does not work in very early bootup code yet, because we
dont have the pagefault handler installed yet so exception section
does not get parsed. rdmsr_safe() will just crash and hang the bootup.
So limit the MSR_IA32_MISC_ENABLE MSR read to those CPU types that
support it.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: Fixes potential crashes on misconfigured systems.
Some CPU features require specific CPUID levels to be available in
order to function, as they contain information about the operation of
a specific feature. However, some BIOSes and virtualization software
provide the ability to mask CPUID levels in order to support legacy
operating systems. We try to enable such CPUID levels when we know
how to do it, but for the remaining cases, filter out such CPU
features when there is no way for us to support them.
Do this in one place, in the CPUID code, with a table-driven approach.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Impact: Cleanup
When PAT was originally introduced, it was handled specially for a few
reasons:
- PAT bugs are hard to track down, so we wanted to maintain a
whitelist of CPUs.
- The i386 and x86-64 CPUID code was not yet unified.
Both of these are now obsolete, so handle PAT like any other features,
including ordinary feature blacklisting due to known bugs.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Impact: use new framework
Use {get|put}_user_try, catch, and _ex in arch/x86/kernel/signal.c.
Note: this patch contains "WARNING: line over 80 characters", because when
introducing new block I insert an indent to avoid mistakes by edit.
Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Impact: cleanup
APIC definitions aren't needed here. Remove the include and fix
up the fallout.
tj: added include to mce_intel_64.c.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Impact: bogus irq_cpustat field removed
idle_timestamp is left over from the removed irqbalance code.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
pte_flags() was introduced as a new pvop in order to extract just the
flags portion of a pte, which is a potentially cheaper operation than
extracting the page number as well. It turns out this operation is
not needed, because simply using a mask to extract the flags from a
pte is sufficient for all current users.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cleanup the cpuid check for DS configuration.
This also fixes a Corei7 CPUID enumeration bug.
Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: Fix debugobjects warning
debugobject enabled kernels spit out a warning in hpet code due to a
workqueue which is initialized on stack.
Add INIT_WORK_ON_STACK() which calls init_timer_on_stack() and use it
in hpet.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Impact: Fixes crashes with misconfigured BIOSes on XSAVE hardware
Avuton Olrich reported early boot crashes with v2.6.28 and
bisected it down to dc1e35c6e9
("x86, xsave: enable xsave/xrstor on cpus with xsave support").
If the CPUID limit bit in MSR_IA32_MISC_ENABLE is set, clear it to
make all CPUID information available. This is required for some
features to work, in particular XSAVE.
Reported-and-bisected-by: Avuton Olrich <avuton@gmail.com>
Tested-by: Avuton Olrich <avuton@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Make X86 SGI Ultraviolet support configurable. Saves about 13K of text size
on my modest config.
text data bss dec hex filename
6770537 1158680 694356 8623573 8395d5 vmlinux
6757492 1157664 694228 8609384 835e68 vmlinux.nouv
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
while looking at:
http://bugzilla.kernel.org/show_bug.cgi?id=11541
I realized that the mtrr.show param cannot work, because
the code is processed much too early.
This patch:
- Declares mtrr.show as early_param
- Stays consistent with the previous param (which I doubt
that it ever worked), so mtrr.show=1 would still work
- Declares mtrr_show as initdata
Signed-off-by: Thomas Renninger <trenn@suse.de>
Acked-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
Now that it's unified, move the (SMP) TLB flushing code from arch/x86/kernel/
to arch/x86/mm/, where it belongs logically.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Conflicts:
arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
arch/x86/kernel/tlb_32.c
Merge it here because both the cpumask changes and the ongoing percpu
work is touching the TLB code. The percpu changes take precedence, as
they eliminate tlb_32.c altogether.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This reverts commit 4217458daf.
Justin Madru bisected this commit, it was causing weird Firefox
crashes.
The reason is that GCC mis-optimizes (re-uses) the on-stack parameters of
the calling frame, which corrupts the syscall return pt_regs state and
thus corrupts user-space register state.
So we go back to the slightly less clean but more optimization-safe
method of getting to pt_regs. Also add a comment to explain this.
Resolves: http://bugzilla.kernel.org/show_bug.cgi?id=12505
Reported-and-bisected-by: Justin Madru <jdm64@gawab.com>
Tested-by: Justin Madru <jdm64@gawab.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: less contention when issuing invalidate IPI, cleanup
Make x86_32 use the same tlb code as 64bit. The 64bit code uses
multiple IPI vectors for tlb shootdown to reduce contention. This
patch makes x86_32 allocate the same 8 IPIs as x86_64 and share the
code paths.
Note that the usage of asmlinkage is inconsistent for x86_32 and 64
and calls for further cleanup. This has been noted with a FIXME
comment in tlb_64.c.
Signed-off-by: Tejun Heo <tj@kernel.org>
Impact: clean up, ipi vector number reordering for x86_32
Make the following changes to prepare for tlb merge.
* reorder x86_32 ip vectors
* adjust tlb_32.c and tlb_64.c such that their logics coincide exactly
- on spurious invalidate ipi, tlb_32 acks the irq
- tlb_64 now has proper memory barriers around clearing
flush_cpumask (no change in generated code)
* unexport flush_tlb_page from tlb_32.c, there's no user
* use unsigned int for cpu id
* drop unnecessary includes from tlb_64.c
Signed-off-by: Tejun Heo <tj@kernel.org>
Impact: cleanup
Make the following uv related cleanups.
* collect visible uv related definitions and interfaces into uv/uv.h
and use it. this cleans up the messy situation where on 64bit, uv
is defined properly, on 32bit generic it's dummy and on the rest
undefined. after this clean up, uv is defined on 64 and dummy on
32.
* update uv_flush_tlb_others() such that it takes cpumask of
to-be-flushed cpus as argument, instead of that minus self, and
returns yet-to-be-flushed cpumask, instead of modifying the passed
in parameter. this interface change will ease dummy implementation
of uv_flush_tlb_others() and makes uv tlb flush related stuff
defined in tlb_uv proper.
Signed-off-by: Tejun Heo <tj@kernel.org>
Impact: cleanup, better irq_regs code generation for x86_64
Make 64-bit use the same optimizations as 32-bit.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Impact: cleanup
%fs is currently set to __KERNEL_DS at boot, and conditionally
switched to __KERNEL_PERCPU for secondary cpus. Instead, initialize
GDT_ENTRY_PERCPU to the same attributes as GDT_ENTRY_KERNEL_DS and
set %fs to __KERNEL_PERCPU unconditionally.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Impact: cleanup && more compact percpu area layout with future changes
Move 64-bit GDT to page-aligned section and clean up comment
formatting.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Impact: cleanup
Remove byte locks implementation, which was introduced by Jeremy in
8efcbab6 ("paravirt: introduce a "lock-byte" spinlock implementation"),
but turned out to be dead code that is not used by any in-kernel
virtualization guest (Xen uses its own variant of spinlocks implementation
and KVM is not planning to move to byte locks).
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: x86_64 percpu area layout change, irq_stack now at the beginning
Now that the PDA is empty except for the stack canary, it can be removed.
The irqstack is moved to the start of the per-cpu section. If the stack
protector is enabled, the canary overlaps the bottom 48 bytes of the irqstack.
tj: * updated subject
* dropped asm relocation of irq_stack_ptr
* updated comments a bit
* rebased on top of stack canary changes
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Impact: cleanup
Use cpu_number to determine if the adjustment is necessary.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Impact: cleanup
Copy the code to cpu_init() to satisfy the requirement that the cpu
be reinitialized. Remove all other calls, since the segments are
already initialized in head_64.S.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Impact: cleanup
Make the following cleanups.
* remove duplicate comment from boot_init_stack_canary() which fits
better in the other place - cpu_idle().
* move stack_canary offset check from __switch_to() to
boot_init_stack_canary().
Signed-off-by: Tejun Heo <tj@kernel.org>
-tip testing found this crash:
> [ 35.258515] calling acpi_cpufreq_init+0x0/0x127 @ 1
> [ 35.264127] BUG: unable to handle kernel NULL pointer dereference at (null)
> [ 35.267554] IP: [<ffffffff80478092>] __bitmap_intersects+0x48/0x73
> [ 35.267554] PGD 0
> [ 35.267554] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC
arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c is still broken: there's no
allocation of the variable mask, so we pass in an uninitialized cmd.mask
field to drv_read(), which then passes it to the scheduler which then
crashes ...
Switch it over to the much simpler constant-cpumask-pointers approach.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: use new work_on_cpu function to reduce stack usage
Replace the saving of current->cpus_allowed and set_cpus_allowed_ptr() with
a work_on_cpu function for drv_read() and drv_write().
Basically converts do_drv_{read,write} into "work_on_cpu" functions that
are now called by drv_read and drv_write.
Note: This patch basically reverts 50c668d6 which reverted 7503bfba, now
that the work_on_cpu() function is more stable.
Signed-off-by: Mike Travis <travis@sgi.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Tested-by: Dieter Ries <clip2@gmx.de>
Tested-by: Maciej Rutecki <maciej.rutecki@gmail.com>
Cc: Dave Jones <davej@redhat.com>
Cc: <cpufreq@vger.kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Since commit 75c46fa, "x64, x2apic/intr-remap: MSI and MSI-X
support for interrupt remapping infrastructure", x86 has had an
implementation of arch_setup_msi_irqs().
That implementation does not call arch_setup_msi_irq(), instead it calls
setup_irq(). No other x86 code calls arch_setup_msi_irq().
That leaves only arch_setup_msi_irqs() in drivers/pci/msi.c, but that
routine is overridden by the x86 version of arch_setup_msi_irqs().
So arch_setup_msi_irq() is dead code, remove it.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
The function setup_cpu_local_masks() has been marked __init, in
order to remove the following section mismatch messages:
WARNING: vmlinux.o(.text+0x3c2c7): Section mismatch in reference from the function setup_cpu_local_masks() to the function .init.text:alloc_bootmem_cpumask_var()
The function setup_cpu_local_masks() references
the function __init alloc_bootmem_cpumask_var().
This is often because setup_cpu_local_masks lacks a __init
annotation or the annotation of alloc_bootmem_cpumask_var is wrong.
WARNING: vmlinux.o(.text+0x3c2d3): Section mismatch in reference from the function setup_cpu_local_masks() to the function .init.text:alloc_bootmem_cpumask_var()
The function setup_cpu_local_masks() references
the function __init alloc_bootmem_cpumask_var().
This is often because setup_cpu_local_masks lacks a __init
annotation or the annotation of alloc_bootmem_cpumask_var is wrong.
WARNING: vmlinux.o(.text+0x3c2df): Section mismatch in reference from the function setup_cpu_local_masks() to the function .init.text:alloc_bootmem_cpumask_var()
The function setup_cpu_local_masks() references
the function __init alloc_bootmem_cpumask_var().
This is often because setup_cpu_local_masks lacks a __init
annotation or the annotation of alloc_bootmem_cpumask_var is wrong.
WARNING: vmlinux.o(.text+0x3c2eb): Section mismatch in reference from the function setup_cpu_local_masks() to the function .init.text:alloc_bootmem_cpumask_var()
The function setup_cpu_local_masks() references
the function __init alloc_bootmem_cpumask_var().
This is often because setup_cpu_local_masks lacks a __init
annotation or the annotation of alloc_bootmem_cpumask_var is wrong.
Signed-off-by: Leonardo Potenza <lpotenza@inwind.it>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: add debug warning
Fire off one message if two apic's discovered with different
apic versions. (this code is only called during CPU init)
The goal of this is to pave the way of the removal of the apic_version[]
array. We dont expect any apic version incompatibilities in the x86
landscape of systems [if so we dont handle them very well and probably
never will handle deep apic version assymetries well], but it's prudent
to have a debug check for one kernel cycle nevertheless.
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
tj: * in asm-offsets_64.c, pda.h inclusion shouldn't be removed as pda
is still referenced in the file
* s/oldrsp/old_rsp/
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Also clean up PER_CPU_VAR usage in xen-asm_64.S
tj: * remove now unused stack_thread_info()
* s/kernelstack/kernel_stack/
* added FIXME comment in xen-asm_64.S
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
tj: moved cpu_number definition out of CONFIG_HAVE_SETUP_PER_CPU_AREA
for voyager.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Move the exception stacks to per-cpu, removing specific allocation code.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Move the irqstackptr variable from the PDA to per-cpu. Make the
stacks themselves per-cpu, removing some specific allocation code.
Add a seperate flag (is_boot_cpu) to simplify the per-cpu boot
adjustments.
tj: * sprinkle some underbars around.
* irq_stack_ptr is not used till traps_init(), no reason to
initialize it early. On SMP, just leaving it NULL till proper
initialization in setup_per_cpu_areas() works. Dropped
is_boot_cpu and early irq_stack_ptr initialization.
* do DECLARE/DEFINE_PER_CPU(char[IRQ_STACK_SIZE], irq_stack)
instead of (char, irq_stack[IRQ_STACK_SIZE]).
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Impact: use new work_on_cpu function to reduce stack usage
Replace the saving of current->cpus_allowed and set_cpus_allowed_ptr() with
a work_on_cpu function for drv_read() and drv_write().
Basically converts do_drv_{read,write} into "work_on_cpu" functions that
are now called by drv_read and drv_write.
Note: This patch basically reverts 50c668d6 which reverted 7503bfba, now
that the work_on_cpu() function is more stable.
Signed-off-by: Mike Travis <travis@sgi.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Tested-by: Dieter Ries <clip2@gmx.de>
Tested-by: Maciej Rutecki <maciej.rutecki@gmail.com>
Cc: Dave Jones <davej@redhat.com>
Cc: <cpufreq@vger.kernel.org>
Fix two compilation warnings in drivers/acpi/sleep.c, one triggered
by unsetting CONFIG_SUSPEND and the other triggered by unsetting
CONFIG_HIBERNATION, by moving some code under the appropriate
#ifdefs .
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
Check CONFIG_FREEZER instead of CONFIG_PM because kprobe booster
depends on freeze_processes() and thaw_processes() when CONFIG_PREEMPT=y.
This fixes a linkage error which occurs when CONFIG_PREEMPT=y, CONFIG_PM=y
and CONFIG_FREEZER=n.
Reported-by: Cheng Renquan <crquan@gmail.com>
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Len Brown <len.brown@intel.com>
On x86_64, if get_per_cpu_var() is used before per cpu area is setup
(if lockdep is turned on, it happens), it needs this_cpu_off to point
to __per_cpu_load. Initialize accordingly.
Signed-off-by: Tejun Heo <tj@kernel.org>
It is an optimization and a cleanup, and adds the following new
generic percpu methods:
percpu_read()
percpu_write()
percpu_add()
percpu_sub()
percpu_and()
percpu_or()
percpu_xor()
and implements support for them on x86. (other architectures will fall
back to a default implementation)
The advantage is that for example to read a local percpu variable,
instead of this sequence:
return __get_cpu_var(var);
ffffffff8102ca2b: 48 8b 14 fd 80 09 74 mov -0x7e8bf680(,%rdi,8),%rdx
ffffffff8102ca32: 81
ffffffff8102ca33: 48 c7 c0 d8 59 00 00 mov $0x59d8,%rax
ffffffff8102ca3a: 48 8b 04 10 mov (%rax,%rdx,1),%rax
We can get a single instruction by using the optimized variants:
return percpu_read(var);
ffffffff8102ca3f: 65 48 8b 05 91 8f fd mov %gs:0x7efd8f91(%rip),%rax
I also cleaned up the x86-specific APIs and made the x86 code use
these new generic percpu primitives.
tj: * fixed generic percpu_sub() definition as Roel Kluin pointed out
* added percpu_and() for completeness's sake
* made generic percpu ops atomic against preemption
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Tejun Heo <tj@kernel.org>
Do the following cleanups:
* kill x86_64_init_pda() which now is equivalent to pda_init()
* use per_cpu_offset() instead of cpu_pda() when initializing
initial_gs
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
pda is now a percpu variable and there's no reason it can't use plain
x86 percpu accessors. Add x86_test_and_clear_bit_percpu() and replace
pda op implementations with wrappers around x86 percpu accessors.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
[ Based on original patch from Christoph Lameter and Mike Travis. ]
As pda is now allocated in percpu area, it can easily be made a proper
percpu variable. Make it so by defining per cpu symbol from linker
script and declaring it in C code for SMP and simply defining it for
UP. This change cleans up code and brings SMP and UP closer a bit.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Now that pda is allocated as part of percpu, percpu doesn't need to be
accessed through pda. Unify x86_64 SMP percpu access with x86_32 SMP
one. Other than the segment register, operand size and the base of
percpu symbols, they behave identical now.
This patch replaces now unnecessary pda->data_offset with a dummy
field which is necessary to keep stack_canary at its place. This
patch also moves per_cpu_offset initialization out of init_gdt() into
setup_per_cpu_areas(). Note that this change also necessitates
explicit per_cpu_offset initializations in voyager_smp.c.
With this change, x86_OP_percpu()'s are as efficient on x86_64 as on
x86_32 and also x86_64 can use assembly PER_CPU macros.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
[ Based on original patch from Christoph Lameter and Mike Travis. ]
Currently pdas and percpu areas are allocated separately. %gs points
to local pda and percpu area can be reached using pda->data_offset.
This patch folds pda into percpu area.
Due to strange gcc requirement, pda needs to be at the beginning of
the percpu area so that pda->stack_canary is at %gs:40. To achieve
this, a new percpu output section macro - PERCPU_VADDR_PREALLOC() - is
added and used to reserve pda sized chunk at the start of the percpu
area.
After this change, for boot cpu, %gs first points to pda in the
data.init area and later during setup_per_cpu_areas() gets updated to
point to the actual pda. This means that setup_per_cpu_areas() need
to reload %gs for CPU0 while clearing pda area for other cpus as cpu0
already has modified it when control reaches setup_per_cpu_areas().
This patch also removes now unnecessary get_local_pda() and its call
sites.
A lot of this patch is taken from Mike Travis' "x86_64: Fold pda into
per cpu area" patch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
_cpu_pda array first uses statically allocated storage in data.init
and then switches to allocated bootmem to conserve space. However,
after folding pda area into percpu area, _cpu_pda array will be
removed completely. Drop the reallocation part to simplify the code
for soon-to-follow changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
[ Based on original patch from Christoph Lameter and Mike Travis. ]
CPU startup code in head_64.S loaded address of a zero page into %gs
for temporary use till pda is loaded but address to the actual pda is
available at the point. Load the real address directly instead.
This will help unifying percpu and pda handling later on.
This patch is mostly taken from Mike Travis' "x86_64: Fold pda into
per cpu area" patch.
Signed-off-by: Tejun Heo <tj@kernel.org>
[ Based on original patch from Christoph Lameter and Mike Travis. ]
This patch makes percpu symbols zerobased on x86_64 SMP by adding
PERCPU_VADDR() to vmlinux.lds.h which helps setting explicit vaddr on
the percpu output section and using it in vmlinux_64.lds.S. A new
PHDR is added as existing ones cannot contain sections near address
zero. PERCPU_VADDR() also adds a new symbol __per_cpu_load which
always points to the vaddr of the loaded percpu data.init region.
The following adjustments have been made to accomodate the address
change.
* code to locate percpu gdt_page in head_64.S is updated to add the
load address to the gdt_page offset.
* __per_cpu_load is used in places where access to the init data area
is necessary.
* pda->data_offset is initialized soon after C code is entered as zero
value doesn't work anymore.
This patch is mostly taken from Mike Travis' "x86_64: Base percpu
variables at zero" patch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Make vmlinux_32.lds.S use the generic PERCPU() macro instead of open
coding it. This will ease future changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
[ Based on original patch from Christoph Lameter and Mike Travis. ]
* Ruggedize some calls in setup_percpu.c to prevent mishaps
in early calls, particularly for non-critical functions.
* Cleanup DEBUG_PER_CPU_MAPS usages and some comments.
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Make early_per_cpu() a lvalue as per_cpu() is and use it where
applicable.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The function uv_wait_completion() spins on reads of a memory-mapped
register, waiting for completion of BAU hardware replies.
It should call "cpu_relax()" between those reads to improve performance
on hyperthreaded configurations.
Signed-off-by: Cliff Wickman <cpw@sgi.com>
Acked-by: Jack Steiner <steiner@sgi.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
-tip testing found this crash:
> [ 35.258515] calling acpi_cpufreq_init+0x0/0x127 @ 1
> [ 35.264127] BUG: unable to handle kernel NULL pointer dereference at (null)
> [ 35.267554] IP: [<ffffffff80478092>] __bitmap_intersects+0x48/0x73
> [ 35.267554] PGD 0
> [ 35.267554] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC
arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c is still broken: there's no
allocation of the variable mask, so we pass in an uninitialized cmd.mask
field to drv_read(), which then passes it to the scheduler which then
crashes ...
Switch it over to the much simpler constant-cpumask-pointers approach.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: widen the effect of the 'nolapic' boot parameter
"nolapic" should not only suppress SMP and use of the LAPIC, but it
also ought to have the effect of disabling all IO-APIC related activity
as well as PCI MSI and HT-IRQs.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: micro-optimization, memory reduction
On x86_64 flush tlb data is stored in per_cpu variables. This is
unnecessary because only the first NUM_INVALIDATE_TLB_VECTORS entries
are accessed.
This patch aims at making the code less confusing (there's nothing
really "per_cpu") by using a plain array. It also would save some memory
on most distros out there (Ubuntu x86_64 has NR_CPUS=64 by default).
[ Ravikiran G Thirumalai also pointed out that the correct alignment
is ____cacheline_internodealigned_in_smp, so that there's no
bouncing on vsmp. ]
Signed-off-by: Frederik Deweerdt <frederik.deweerdt@xprog.eu>
Acked-by: Ravikiran Thirumalai <kiran@scalex86.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This commit broke flush_tlb_others_ipi() causing boot hangs on a
16 logical cpu system:
> commit 4595f9620c
> Author: Rusty Russell <rusty@rustcorp.com.au>
> Date: Sat Jan 10 21:58:09 2009 -0800
>
> x86: change flush_tlb_others to take a const struct cpumask
This change resulted in sending the invalidate tlb vector to the
sender itself causing the hang. flush_tlb_others_ipi() should exclude
the sender itself from the destination list.
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix potential boot crash on MAXSMP
Remove code left over by:
50c668d: Revert "cpumask: use work_on_cpu in acpi-cpufreq.c for drv_read
That cmd.cpumask is not allocated anymore. No impact on default !MAXSMP
kernels.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This reverts commit e0c7317557.
This patch was wrong, as lockdep (and thus the irq state tracer)
aren't nmi safe. People are already seeing lockdep warnings due
to this.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This reverts commit 7503bfbae8.
Dieter Ries reported bootup soft-hangs and bisected it back to
this commit, and reverting this commit gave him a working system.
The commit introduces work_on_cpu() use into the cpufreq code,
but that is subtly problematic from a lock hierarchy POV: the
hotplug-cpu lock is an highlevel lock that is taken before
lowlevel locks, and in this codepath we are called with the
policy lock taken.
Dieter did not have lockdep enabled so we dont have a nice stack
trace proof for this, but using work_on_cpu() in such a lowlevel
place certainly looks wrong, so we revert the patch.
work_on_cpu() needs to be reworked to be more generally usable.
Reported-by: Dieter Ries <clip2@gmx.de>
Tested-by: Dieter Ries <clip2@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fix this by reintroducing asm/smp.h include in apic.c - later on
I will fix this by removing non-smp data from smp.h
Also fix the __inquire_remote_apic() prototype/inline.
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fix this by reintroducing asm/smp.h include in mpparse.c - later on
I will fix this by removing non-smp data from smp.h.
Reported-by: Petr Titera <P.Titera@century.cz>
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Alexander Beregalov reported that this warning is caused by the HPET code:
> hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
> hpet0: 3 comparators, 64-bit 14.318180 MHz counter
> ODEBUG: object is on stack, but not annotated
> ------------[ cut here ]------------
> WARNING: at lib/debugobjects.c:251 __debug_object_init+0x2a4/0x352()
> Bisected down to 26afe5f2fb
> (x86: HPET_MSI Initialise per-cpu HPET timers)
The commit is fine - but the on-stack workqueue entry needs annotation.
Reported-and-bisected-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Tested-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
Fix:
ERROR: trailing whitespace
ERROR: code indent should use tabs where possible
WARNING: %Ld/%Lu are not-standard C, use %lld/%llu
WARNING: printk() should include KERN_ facility level
ERROR: spaces required around that '=' (ctx:VxW)
total: 13 errors, 2 warnings
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
