Commit Graph

88 Commits

Author SHA1 Message Date
Kevin Hilman
44e51b2922 OMAP2+: Kconfig: don't select PM in OMAP2PLUS_TYPICAL
CONFIG_PM is no longer a user-selectable Kconfig option.  Rather it is
automatically enabled if either CONFIG_SUSPEND or CONFIG_RUNTIME_PM is
enabled, so having a 'select PM' here is redunant when 'select
CONFIG_PM_RUNTIME' is present.

Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-08-05 11:54:53 -07:00
Igor Grinberg
c314697478 arm: omap3: cm-t35: add support for cm-t3730
cm-t3730 is basically the same board as cm-t35,
but has AM/DM3730 SoC assembled and therefore some changes are required.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Acked-by: Mike Rapoport <mike@compulab.co.il>
[tony@atomide.com: updated for init_irq cleanup as noted by khilman@ti.com]
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-07-05 03:38:23 -07:00
Mike Rapoport
7be13ad0ce omap: drop board-igep0030.c
since it is merged into board-igep0020.c

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-05-17 03:31:24 -07:00
Linus Torvalds
2f284c8463 Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (35 commits)
  ARM: Update (and cut down) mach-types
  ARM: 6771/1: vexpress: add support for multiple core tiles
  ARM: 6797/1: hw_breakpoint: Fix newlines in WARNings
  ARM: 6751/1: vexpress: select applicable errata workarounds in Kconfig
  ARM: 6753/1: omap4: Enable ARM local timers with OMAP4430 es1.0 exception
  ARM: 6759/1: smp: Select local timers vs broadcast timer support runtime
  ARM: pgtable: add pud-level code
  ARM: 6673/1: LPAE: use phys_addr_t instead of unsigned long for start of membanks
  ARM: Use long long format when printing meminfo physical addresses
  ARM: integrator: add Integrator/CP sched_clock support
  ARM: realview/vexpress: consolidate SMP bringup code
  ARM: realview/vexpress: consolidate localtimer support
  ARM: integrator/versatile: consolidate FPGA IRQ handling code
  ARM: rationalize versatile family Kconfig/Makefile
  ARM: realview: remove old AMBA device DMA definitions
  ARM: versatile: remove old AMBA device DMA definitions
  ARM: vexpress: use new init_early for clock tree and sched_clock init
  ARM: realview: use new init_early for clock tree and sched_clock init
  ARM: versatile: use new init_early for clock tree and sched_clock init
  ARM: integrator: use new init_early for clock tree init
  ...
2011-03-23 20:37:26 -07:00
Russell King
196f020fbb Merge branches 'fixes', 'pgt-next' and 'versatile' into devel 2011-03-20 09:32:12 +00:00
Linus Torvalds
0df0914d41 Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (258 commits)
  omap: zoom: host should not pull up wl1271's irq line
  arm: plat-omap: iommu: fix request_mem_region() error path
  OMAP2+: Common CPU DIE ID reading code reads wrong registers for OMAP4430
  omap4: mux: Remove duplicate mux modes
  omap: iovmm: don't check 'da' to set IOVMF_DA_FIXED flag
  omap: iovmm: disallow mapping NULL address when IOVMF_DA_ANON is set
  omap2+: mux: Fix compile when CONFIG_OMAP_MUX is not selected
  omap4: board-omap4panda: Initialise the serial pads
  omap3: board-3430sdp: Initialise the serial pads
  omap4: board-4430sdp: Initialise the serial pads
  omap2+: mux: Add macro for configuring static with omap_hwmod_mux_init
  omap2+: mux: Remove the use of IDLE flag
  omap2+: Add separate list for dynamic pads to mux
  perf: add OMAP support for the new power events
  OMAP4: Add IVA OPP enteries.
  OMAP4: Update Voltage Rail Values for MPU, IVA and CORE
  OMAP4: Enable 800 MHz and 1 GHz MPU-OPP
  OMAP3+: OPP: Replace voltage values with Macros
  OMAP3: wdtimer: Fix CORE idle transition
  Watchdog: omap_wdt: add fine grain runtime-pm
  ...

Fix up various conflicts in
 - arch/arm/mach-omap2/board-omap3evm.c
 - arch/arm/mach-omap2/clock3xxx_data.c
 - arch/arm/mach-omap2/usb-musb.c
 - arch/arm/plat-omap/include/plat/usb.h
 - drivers/usb/musb/musb_core.h
2011-03-17 19:28:15 -07:00
Santosh Shilimkar
4bdb157749 ARM: 6755/1: omap4: l2x0: Populate set_debug() function and enable Errata 727915
Populate the l2x0 set_debug function pointer with OMAP secure call
and enable the PL310 Errata 727915

This patch has dependency on the earlier patch
ARM: l2x0: Errata fix for flush by Way operation can cause data
corruption

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-03-09 00:18:47 +00:00
Santosh Shilimkar
07787a85c0 ARM: 6753/1: omap4: Enable ARM local timers with OMAP4430 es1.0 exception
On OMAP4430 ES1.0 the local timers are gated by security. Enable the
CONFIG_LOCAL_TIMERS for omap2plus build and handle the OMAP4430 es1.0
exception case.

This patch has dependency on the first patch in this series.
	ARM: smp: Select local timers vs dummy timer support runtime

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-23 17:54:55 +00:00
Panduranga Mallireddy
cdc4348271 omap: select REGULATOR_FIXED_VOLTAGE by default for panda and sdp4430
Power to the wl12xx wlan device is controlled by a fixed regulator.
Boards that have the wl12xx should select REGULATOR_FIXED_VOLTAGE.
Signed-off-by: Panduranga Mallireddy <panduranga_mallireddy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-02-22 08:37:03 -08:00
Tony Lindgren
9238b6d8e8 Merge branches 'devel-cleanup', 'devel-board', 'devel-early-init' and 'devel-ti816x' into omap-for-linus 2011-02-16 11:32:38 -08:00
Hemant Pedanekar
2c87fb2e64 TI816X: Create board support and enable build for TI816X EVM
This patch adds minimal support and build configuration for TI816X EVM.

Signed-off-by: Hemant Pedanekar <hemantp@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-02-16 08:31:52 -08:00
Hemant Pedanekar
4bd7be22f4 TI816X: Update common omap platform files
This patch updates the common platform files with TI816X support.

The approach taken in this patch is to add TI816X as part of OMAP3 variant where
the cpu class is considered as OMAP34XX and the type is TI816X. This means, both
cpu_is_omap34xx() and cpu_is_ti816x() checks return success on TI816X.

A kernel config option CONFIG_SOC_OMAPTI816X is added under OMAP3 to include
support for TI816X build.

Signed-off-by: Hemant Pedanekar <hemantp@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-02-16 08:31:39 -08:00
Tony Lindgren
59b479e098 omap: Start using CONFIG_SOC_OMAP
We want to have just CONFIG_ARCH_OMAP2, 3 and 4. The rest
are nowadays just subcategories of these.

Search and replace the following:

ARCH_OMAP2420		SOC_OMAP2420
ARCH_OMAP2430		SOC_OMAP2430
ARCH_OMAP3430		SOC_OMAP3430

No functional changes.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Thomas Weber <weber@corscience.de>
Acked-by: Sourav Poddar <sourav.poddar@ti.com>
2011-01-27 16:39:40 -08:00
Linus Torvalds
3e5b08cbbf Merge branch 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
* 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (144 commits)
  USB: add support for Dream Cheeky DL100B Webmail Notifier (1d34:0004)
  USB: serial: ftdi_sio: add support for TIOCSERGETLSR
  USB: ehci-mxc: Setup portsc register prior to accessing OTG viewport
  USB: atmel_usba_udc: fix freeing irq in usba_udc_remove()
  usb: ehci-omap: fix tll channel enable mask
  usb: ohci-omap3: fix trivial typo
  USB: gadget: ci13xxx: don't assume that PAGE_SIZE is 4096
  USB: gadget: ci13xxx: fix complete() callback for no_interrupt rq's
  USB: gadget: update ci13xxx to work with g_ether
  USB: gadgets: ci13xxx: fix probing of compiled-in gadget drivers
  Revert "USB: musb: pm: don't rely fully on clock support"
  Revert "USB: musb: blackfin: pm: make it work"
  USB: uas: Use GFP_NOIO instead of GFP_KERNEL in I/O submission path
  USB: uas: Ensure we only bind to a UAS interface
  USB: uas: Rename sense pipe and sense urb to status pipe and status urb
  USB: uas: Use kzalloc instead of kmalloc
  USB: uas: Fix up the Sense IU
  usb: musb: core: kill unneeded #include's
  DA8xx: assign name to MUSB IRQ resource
  usb: gadget: g_ncm added
  ...

Manually fix up trivial conflicts in USB Kconfig changes in:
	arch/arm/mach-omap2/Kconfig
	arch/sh/Kconfig
	drivers/usb/Kconfig
	drivers/usb/host/ehci-hcd.c
and annoying chip clock data conflicts in:
	arch/arm/mach-omap2/clock3xxx_data.c
	arch/arm/mach-omap2/clock44xx_data.c
2011-01-07 13:16:28 -08:00
Nishanth Menon
f5a6422d4e omap4: opp: add OPP table data
This patch adds OPP tables for OMAP4. New file has been added to keep
the OMAP4 opp tables and the registration of these tables with the
generic opp framework by OMAP SoC OPP interface.

Based on:
http://dev.omapzoom.org/?p=santosh/kernel-omap4-base.git;a=blob;f=arch/arm/mach-omap2/opp44xx_data.c;h=252e3d0cb6050a64f390b9311c1c4977d74f762a;hb=refs/heads/omap4_next

Signed-off-by: Thara Gopinath <thara@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-21 14:30:40 -08:00
Nishanth Menon
fd1478cd61 omap: opp: add OMAP3 OPP table data and common init
Add OPP data for OMAP34xx and OMAP36xx and initialization functions
to populate OPP tables based on current SoC.
introduce an OMAP generic opp initialization routine which OMAP3
and OMAP4+ SoCs can use to register their OPP definitions.

Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-21 14:30:40 -08:00
Aaro Koskinen
5690597fc6 arm: mach-omap2: Kconfig: fix incorrect option
There is no MFD config option, MFD_SUPPORT should be selected instead.
This will prevent build errors when trying out different configurations.

Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-20 18:48:15 -08:00
Ohad Ben-Cohen
7c50152f08 omap: boards w/ wl12xx should select REGULATOR_FIXED_VOLTAGE
Power to the wl12xx wlan device is controlled by a fixed regulator.

Boards that have the wl12xx should select REGULATOR_FIXED_VOLTAGE so
users will not be baffled.

Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-17 17:02:08 -08:00
Tony Lindgren
fea83f6a9b Merge branch 'devel-board' into omap-for-linus 2010-12-17 15:14:02 -08:00
Aaro Koskinen
2d200665c3 arm: omap: add minimal support for RM-680
Add minimal support for Nokia RM-680 board.

Tested with omap2plus_defconfig.

Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
[tony@atomide.com: updated to remove omap_gpio_init
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-17 15:13:47 -08:00
Tony Lindgren
7b045c96cd omap: Don't select mux by default for each board
This should be only selected in CONFIG_ARCH_OMAP2PLUS_TYPICAL
to make it easy to disable.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-07 16:25:41 -08:00
Tony Lindgren
52aa8c539d Merge branch 'ctrl-wip/mux-omap4-v4' of git://gitorious.org/omap-pm/linux into omap-for-linus 2010-11-30 14:46:36 -08:00
Srinath
1cb125caf2 omap: AM3517/05: Add craneboard support
Craneboard is a hardware development platform based on the
Sitara AM3517 ARM Cortex - A8 microprocessor device. This is a
low cost reference design.

This patch adds basic board file. Detailed support will follow in
subsequent patches.

  [1] http://www.ti.com/arm
  [2] http://www.mistralsolutions.com/products/craneboard.php

Signed-off-by: Srinath <srinath@mistralsolutions.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-11-30 13:48:46 -08:00
Anand Gadiyar
56976b6ac4 arm: omap4: select USB_ARCH_HAS_EHCI
The OMAP4 has an on-chip EHCI controller. Select USB_ARCH_HAS_EHCI
to allow the EHCI driver to be built on OMAP4.

Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
2010-12-01 02:42:36 +05:30
sricharan
fc63de829b OMAP4: pandaboard: Select CBL & CBS package and initialize mux
The mux framework allows the change of pad configuration by drivers
when needed. Prior to this the mux framework has to be initialised
with all the mux parameters specific to the board. The mux init is
already present in the board file for SDP. Adding the mux init
for panda boards.

Signed-off-by: sricharan <r.sricharan@ti.com>
Acked-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-11-17 12:01:54 +01:00
Benoit Cousson
6fea7b0a7a OMAP4: sdp4430: Select CBS package for ES2
Select the CBS package if SDP4430 is enabled during config.
Use the proper package (CBL or CBS) based on chip revision.

Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Anand Gadiyar <gadiyar@ti.com>
2010-11-17 12:01:53 +01:00
Benoit Cousson
a7722d8796 OMAP4: mux: Add CBS package data for OMAP4430 ES2
Please note that the full muxmodes are re-defined for ES2 instead
of using the subset. There are 81 differences among 204 pins.
The subset fixup will have to iterate over the whole list for each
subset entry, which can lead to an important number of iteration.
On the other hand, it will take much more memory at boot time.

Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Anand Gadiyar <gadiyar@ti.com>
2010-11-17 12:01:52 +01:00
Benoit Cousson
fb6bf6320e OMAP4: sdp4430: Select CBL package for ES1 and initialize mux
Select the CBL package if SDP4430 is enabled during config.
Initialize the mux framework during the board init.

Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
2010-11-17 12:01:51 +01:00
Benoit Cousson
a041a52c4d OMAP4: mux: Add CBL package data for OMAP4430 ES1
Add data for OMAP4430 generated from HW pinout & register database.
The data set is split in two partitions for both core and wkup.

Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
2010-11-17 12:01:50 +01:00
Paul Walmsley
6515e48932 OMAP2+: Kconfig: disallow builds for boards that don't use the currently-selected SoC
Currently, if, for example, CONFIG_ARCH_OMAP2420 is not selected, OMAP2420
board files can still be included in the build.  This results in link errors:

arch/arm/mach-omap2/built-in.o: In function `omap_generic_map_io':
.../arch/arm/mach-omap2/board-generic.c:51: undefined reference to `omap2_set_globals_242x'
arch/arm/mach-omap2/built-in.o: In function `omap_h4_init':
.../arch/arm/mach-omap2/board-h4.c:330: undefined reference to `omap2420_mux_init'
arch/arm/mach-omap2/built-in.o: In function `omap_h4_map_io':
.../arch/arm/mach-omap2/board-h4.c:373: undefined reference to `omap2_set_globals_242x'
arch/arm/mach-omap2/built-in.o: In function `omap_apollon_init':
.../arch/arm/mach-omap2/board-apollon.c:325: undefined reference to `omap2420_mux_init'
arch/arm/mach-omap2/built-in.o: In function `omap_apollon_map_io':
.../arch/arm/mach-omap2/board-apollon.c:353: undefined reference to `omap2_set_globals_242x'
make: *** [.tmp_vmlinux1] Error 1

Fix this by making the boards depend on the Kconfig option for the
specific SoC that they use.

Also, while here, fix the mach-omap2/board-generic.c file to remove the
dependency on OMAP2420.

Charulatha Varadarajan <charu@ti.com> caught a typo - thanks Charu.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Charulatha Varadarajan <charu@ti.com>
2010-10-08 11:40:17 -06:00
Enric Balletbo i Serra
e844b1da87 omap3: Add minimal OMAP3 IGEP module support
The OMAP3 IGEP module is a low-power, high performance production-ready
system-on-module (SOM) based on TI's OMAP3 family. More about this
board at www.igep.es.

Signed-off-by: Enric Balletbo i Serra <eballetbo@gmail.com>
[tony@atomide.com: updated for the mmc changes and to be selected by default]
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-10-08 10:22:11 -07:00
Govindraj.R
12a75da296 OMAP: SERIAL: Enable omap-serial driver in Kconfig
Enable omap-serial driver in /mach-omap2/Kconfig and
move 8250 driver selection for zoom boards. With omap-serial
driver addition all omap-uarts can be handled with
omap-serial driver.

With addition of omap-serial driver console parameter
needs be changed in bootargs from ttyS* should be
replaced with ttyO* [O --> OMAP not ZERO]

For example: ttyS0[UART1 on 3430SDP] changes to ttyO0.

But with some boards that do not use omap-uart as console uart.
we need to handle them with 8250 driver. Ex: ZOOM2/3.
For zoom2/3 board we need to use 8250 serial driver and
console parameter will remain ttyS0 which basically uses
a Quad uart placed on the debug board connected through a
gpio line.

Signed-off-by: Govindraj.R <govindraj.raja@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-09-29 12:43:03 -07:00
Tim Nordell
d40f3f15d3 ARM: OMAP3LOGIC: Adding LogicPD OMAP3 board support
Adding support for LogicPD's OMAP 3530 LV SOM and
OMAP 35x Torpedo board.

Signed-off-by: Tim Nordell <tim.nordell@logicpd.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-28 09:58:41 -07:00
Igor Grinberg
d04b620e6e omap3: Introduce CompuLab CM-T3517 module
Add basic suppot, enable uart and led.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-27 15:14:26 -07:00
Santosh Shilimkar
455d4d2dc7 omap: Update and rename common defconfig for omap2plus devices
This patch addresses below things

- Renaming existing omap3_defconfig which has OMAP2, OMAP3 and OMAP4 builds
  enabled to more appropriate name 'omap2plus_defconfig'
- L1 cache shift is suppose to be 5 on OMAP4 where as it is 6 on previous
  OMAPs. Keeping it to 5 is safer option for OMAP4 and previous OMAPs. For
  OMAP3 only build the shift would be still 6
- Enable needed Errata's for OMAP4 to work with DMA based device drivers
	CONFIG_PL310_ERRATA_588369=y
	CONFIG_ARM_ERRATA_720789=y
- Enable the Micrel ethernet controller
	CONFIG_KS8851=y
	CONFIG_KS8851_MLL=y

With above three changes, OMAP4 ethernet, mmc etc works reliably.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-20 14:58:09 -07:00
David Anders
b075f58b2c omap4: Add OMAP4 Panda Support
Add initial support for the OMAP4 based Panda Board.

Signed-off-by: David Anders <x0132446@ti.com>
[tony@atomide.com: selected board by default in Kconfig]
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-08-02 13:18:05 +03:00
Tony Lindgren
8d9166b519 omap2/3/4: Add Kconfig option to compile in typical omap features
This produces a sane config that's suitable for using as the
base for most omap2/3/4 boards.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05 16:31:48 +03:00
Tony Lindgren
ffb63e3402 omap2/3/4: Select all omaps and boards by default
Select all omaps and boards by default

Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05 16:31:47 +03:00
Tony Lindgren
68ac8f7dda omap2/3/4: Move Kconfig options to mach-omap2/Kconfig
Move omap2/3/4 specific Kconfig options to mach-omap2/Kconfig

Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05 16:31:47 +03:00
Tony Lindgren
4a54db6124 omap: Make omap specific features appear under Kconfig menu
This will make Kconfig look nicer for selecting omap processor type

Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05 16:31:47 +03:00
Tony Lindgren
369ed78fc9 omap: mux: Select POP package for 2430SDP
Select POP package for 2430SDP

Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05 16:31:38 +03:00
Tony Lindgren
bd8f0fc979 omap: mux: Select POP package for N8X0
Select POP package for N8X0

Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05 16:31:38 +03:00
Tony Lindgren
b52b14ef0d omap: mux: Select POP package for Apollon
Select POP package for Apollon

Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05 16:31:37 +03:00
Tony Lindgren
23275d459e omap: mux: Select SIP package for H4
Select SIP package for H4

Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05 16:31:37 +03:00
Tony Lindgren
fc44046167 omap: mux: Add data for 2420
Add data for 2420. Big thanks to Paul Walmsley <paul@pwsan.com>
for generating usable mux data out of TRMs.

Cc: Benoit Cousson <b-cousson@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05 16:31:36 +03:00
Jason
9cbc34939c omap3: Add support for OMAP3Stalker boards
Add support for OMAP3Stalker boards

Signed-off-by: Jason Lam <lzg@ema-tech.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-20 11:21:22 -07:00
Viral Mehta
4ab866d11a omap2: select ARCH_OMAP_OTG for OMAP2430 SDP
Configuration for OMAP2430 should select ARCH_OMAP_OTG just like
it is done for OMAP2420

Signed-off-by: Viral Mehta <viral.mehta@lntinfotech.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-20 10:48:57 -07:00
Thomas Weber
51824c5f5e omap: Devkit8000: Add missing package selection
Devkit8000 uses the CUS package for OMAP3530.

This patch adds missing package selection for CUS and enables
CONFIG_MUX.

Replace whitespace with tab in Kconfig.

Signed-off-by: Thomas Weber <weber@corscience.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23 15:37:24 -07:00
Thomas Weber
476544cad1 Add minimal support for DevKit8000
These patches add board support for the Timll DevKit8000.

The DevKit8000 is a beagle board clone from Timll, sold by
armkits.com. The DevKit8000 has RS232 serial port, LCD, DVI-D,
S-Video, Ethernet, SD/MMC, keyboard, camera, SPI, I2C, USB and
JTAG interface.

Signed-off-by: Thomas Weber <weber@corscience.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-19 15:22:17 -08:00
Enric Balletbo i Serra
28e0f13cd1 omap3: Fix typo on IGEP v2 board
Fix typo on IGEP v2 board

Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-17 17:23:20 -08:00