Commit Graph

384 Commits

Author SHA1 Message Date
Linus Torvalds
96d746c68f Fix init/main.c to use regular printk with '%pF' for initcall fn
.. small detail, but the silly e1000e initcall warning debugging caused
me to look at this code.  Rather than gouge my eyes out with a spoon, I
just fixed it.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-03 13:38:07 -07:00
Andi Kleen
9e94cd325b Move sysctl check into debugging section and don't make it default y
I noticed that sysctl_check.o was the largest object file in
a allnoconfig build in kernel/*.

  36243       0       0   36243    8d93 kernel/sysctl_check.o

This is because it was default y and && EMBEDDED. But I don't
really see a need for a non kernel developer to have their
sysctls checked all the time.

So move the Kconfig into the kernel debugging section and
also drop the default y and the EMBEDDED check.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-16 17:13:43 -07:00
Arjan van de Ven
59f9415ffb modules: extend initcall_debug functionality to the module loader
The kernel has this really nice facility where if you put "initcall_debug"
on the kernel commandline, it'll print which function it's going to
execute just before calling an initcall, and then after the call completes
it will

1) print if it had an error code

2) checks for a few simple bugs (like leaving irqs off)
and

3) print how long the init call took in milliseconds.

While trying to optimize the boot speed of my laptop, I have been loving
number 3 to figure out what to optimize...  ...  and then I wished that
the same thing was done for module loading.

This patch makes the module loader use this exact same functionality; it's
a logical extension in my view (since modules are just sort of late
binding initcalls anyway) and so far I've found it quite useful in finding
where things are too slow in my boot.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-08-12 17:52:54 +10:00
Robert P. J. Day
0b0de14433 Kconfig: Extend "menuconfig" for modules to simplify Kconfig file
Given that the init/Kconfig file uses a "menuconfig" directive for
modules already, might as well wrap all the submenu entries in an "if"
to toss all those dependencies.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-08-06 22:14:04 +02:00
Bartlomiej Zolnierkiewicz
b5b9309d34 remove unnecessary <linux/hdreg.h> includes
Following files don't need <linux/hdreg.h> at all:

- arch/mips/jazz/setup.c
- arch/sh/boards/mach-systemh/irq.c
- drivers/macintosh/mediabay.c
- drivers/scsi/hptiop.c
- drivers/usb/storage/freecom.c
- arch/powerpc/include/asm/ide.h
- init/main.c

Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-08-05 18:16:58 +02:00
Linus Torvalds
e811603feb Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes:
  kbuild: scripts/ver_linux: don't set PATH
  Kconfig/init: change help text to match default value
  kbuild: genksyms: Include extern information in dumps
  kbuild: genksyms parser: fix the __attribute__ rule
  kbuild: scripts/genksyms/lex.l: add %option noinput
  kconfig: scripts/kconfig/zconf.l: add %option noinput
  kbuild: fix O=... build of um
2008-08-01 11:50:21 -07:00
Linus Torvalds
57b1494d2b Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  generic, x86: fix add iommu_num_pages helper function
  x86: remove stray <6> in BogoMIPS printk
  x86: move dma32_reserve_bootmem() after reserve_crashkernel()
2008-08-01 10:28:17 -07:00
jkacur
775a7229ac Kconfig/init: change help text to match default value
Change the "If unsure" message to match the default value.

Signed-off-by: John Kacur <jkacur at gmail dot com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-07-31 23:33:10 +02:00
Geert Uytterhoeven
bd673c7c3b initrd: cast initrd_start' to void *'
commit fb6624ebd9 (initrd: Fix virtual/physical
mix-up in overwrite test) introduced the compiler warning below on mips,
as its virt_to_page() doesn't cast the passed address to unsigned long
internally, unlike on most other architectures:

init/main.c: In function `start_kernel':
init/main.c:633: warning: passing argument 1 of `virt_to_phys' makes pointer from integer without a cast
init/main.c:636: warning: passing argument 1 of `virt_to_phys' makes pointer from integer without a cast

For now, kill the warning by explicitly casting initrd_start to `void *', as
that's the type it should really be.

Reported-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-30 09:41:45 -07:00
Ingo Molnar
35780c8ea7 Merge commit 'v2.6.27-rc1' into x86/urgent 2008-07-29 12:10:50 +02:00
Ingo Molnar
cb28a1bbdb Merge branch 'linus' into core/generic-dma-coherent
Conflicts:

	arch/x86/Kconfig

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-29 00:07:55 +02:00
Joe Perches
d7ba11d01c x86: remove stray <6> in BogoMIPS printk
Rabin Vincent noticed that there's a stray <6> in BogoMIPS printk:

> Remove the extra KERN_INFO which causes this:
> Calibrating delay loop... <6>179.40 BogoMIPS (lpj=897024)
> -	printk(KERN_INFO "%lu.%02lu BogoMIPS (lpj=%lu)\n",
> -			loops_per_jiffy/(500000/HZ),
> -			(loops_per_jiffy/(5000/HZ)) % 100, loops_per_jiffy);
> +	printk("%lu.%02lu BogoMIPS (lpj=%lu)\n",
> +		loops_per_jiffy/(500000/HZ),
> +		(loops_per_jiffy/(5000/HZ)) % 100, loops_per_jiffy);
>  }

How about just using KERN_CONT and leaving the whitespace
for a patch that does the entire file?

Reported-by: Rabin Vincent <rabin@rab.in>
2008-07-28 14:22:26 +02:00
Linus Torvalds
6948385cbd Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-next
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-next: (25 commits)
  setlocalversion: do not describe if there is nothing to describe
  kconfig: fix typos: "Suport" -> "Support"
  kconfig: make defconfig is no longer chatty
  kconfig: make oldconfig is now less chatty
  kconfig: speed up all*config + randconfig
  kconfig: set all new symbols automatically
  kconfig: add diffconfig utility
  kbuild: remove Module.markers during mrproper
  kbuild: sparse needs CF not CHECKFLAGS
  kernel-doc: handle/strip __init
  vmlinux.lds: move __attribute__((__cold__)) functions back into final .text section
  init: fix URL of "The GNU Accounting Utilities"
  kbuild: add arch/$ARCH/include to search path
  kbuild: asm symlink support for arch/$ARCH/include
  kbuild: support arch/$ARCH/include for tags, cscope
  kbuild: prepare headers_* for arch/$ARCH/include
  kbuild: install all headers when arch is changed
  kbuild: make clean removes *.o.* as well
  kbuild: optimize headers_* targets
  kbuild: only one call for include/ in make headers_*
  ...
2008-07-27 09:59:59 -07:00
Adrian Bunk
f56f6d30c7 make init/do_mounts.c:root_device_name static
This patch makes the needlessly global root_device_name static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 12:00:12 -07:00
Eduard - Gabriel Munteanu
7babe8db99 Full conversion to early_initcall() interface, remove old interface
A previous patch added the early_initcall(), to allow a cleaner hooking of
pre-SMP initcalls.  Now we remove the older interface, converting all
existing users to the new one.

[akpm@linux-foundation.org: cleanups]
[akpm@linux-foundation.org: build fix]
[kosaki.motohiro@jp.fujitsu.com: warning fix]
[kosaki.motohiro@jp.fujitsu.com: warning fix]
Signed-off-by: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 12:00:04 -07:00
Eduard - Gabriel Munteanu
c2147a5092 Better interface for hooking early initcalls
Added early initcall (pre-SMP) support, using an identical interface to
that of regular initcalls.  Functions called from do_pre_smp_initcalls()
could be converted to use this cleaner interface.

This is required by CPU hotplug, because early users have to register
notifiers before going SMP.  One such CPU hotplug user is the relay
interface with buffer-only channels, which needs to register such a
notifier, to be usable in early code.  This in turn is used by kmemtrace.

Signed-off-by: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 12:00:04 -07:00
Heikki Orsila
12d2b8f951 kconfig: fix typos: "Suport" -> "Support"
Signed-off-by: Heikki Orsila <heikki.orsila@iki.fi>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-07-25 22:12:52 +02:00
S.Çağlar Onur
37a4c94074 init: fix URL of "The GNU Accounting Utilities"
Following patch corrects URL of "The GNU Accounting Utilities" in init/Kconfig.

Noticed by: Bart Van Assche" <bart.vanassche@gmail.com>

Signed-off-by: S.Çağlar Onur <caglar@pardus.org.tr>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-07-25 22:12:36 +02:00
Adrian Bunk
3ae4eed34b proper pid{hash,map}_init() prototypes
This patch adds proper prototypes for pid{hash,map}_init() in
include/linux/pid_namespace.h

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 10:53:45 -07:00
Daniel Guilak
197dcffc8b init/version.c: define version_string only if CONFIG_KALLSYMS is not defined
int Version_* is only used with ksymoops, which is only needed (according
to README and Documentation/Changes) if CONFIG_KALLSYMS is NOT defined.
Therefore this patch defines version_string only if CONFIG_KALLSYMS is not
defined.

Signed-off-by: Daniel Guilak <daniel@danielguilak.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 10:53:29 -07:00
Daniel Guilak
277e2c6959 init/version.c: silence sparse warning by declaring the version string
Signed-off-by: Daniel Guilak <daniel@danielguilak.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 10:53:28 -07:00
Thomas Petazzoni
2d6ffcca62 inflate: refactor inflate malloc code
Inflate requires some dynamic memory allocation very early in the boot
process and this is provided with a set of four functions:
malloc/free/gzip_mark/gzip_release.

The old inflate code used a mark/release strategy rather than implement
free.  This new version instead keeps a count on the number of outstanding
allocations and when it hits zero, it resets the malloc arena.

This allows removing all the mark and release implementations and unifying
all the malloc/free implementations.

The architecture-dependent code must define two addresses:
 - free_mem_ptr, the address of the beginning of the area in which
   allocations should be made
 - free_mem_end_ptr, the address of the end of the area in which
   allocations should be made. If set to 0, then no check is made on
   the number of allocations, it just grows as much as needed

The architecture-dependent code can also provide an arch_decomp_wdog()
function call.  This function will be called several times during the
decompression process, and allow to notify the watchdog that the system is
still running.  If an architecture provides such a call, then it must
define ARCH_HAS_DECOMP_WDOG so that the generic inflate code calls
arch_decomp_wdog().

Work initially done by Matt Mackall, updated to a recent version of the
kernel and improved by me.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Mikael Starvik <mikael.starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 10:53:28 -07:00
Robert P. J. Day
cb345d7352 init/: delete hard-coded setting and testing of BUILD_CRAMDISK
There seems to be little point in explicitly setting, then testing the macro
BUILD_CRAMDISK within the context of a single source file.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 10:53:27 -07:00
Adrian Bunk
82c8253ac2 init/do_mounts.c should #include <linux/initrd.h>
Every file should include the headers containing the externs for its
global code (in this case for rd_doload).

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 10:53:27 -07:00
Linus Torvalds
7f9dce3837 Merge branch 'sched/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'sched/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: hrtick_enabled() should use cpu_active()
  sched, x86: clean up hrtick implementation
  sched: fix build error, provide partition_sched_domains() unconditionally
  sched: fix warning in inc_rt_tasks() to not declare variable 'rq' if it's not needed
  cpu hotplug: Make cpu_active_map synchronization dependency clear
  cpu hotplug, sched: Introduce cpu_active_map and redo sched domain managment (take 2)
  sched: rework of "prioritize non-migratable tasks over migratable ones"
  sched: reduce stack size in isolated_cpu_setup()
  Revert parts of "ftrace: do not trace scheduler functions"

Fixed up conflicts in include/asm-x86/thread_info.h (due to the
TIF_SINGLESTEP unification vs TIF_HRTICK_RESCHED removal) and
kernel/sched_fair.c (due to cpu_active_map vs for_each_cpu_mask_nr()
introduction).
2008-07-23 19:36:53 -07:00
Johannes Berg
baabaae981 make CONFIG_KMOD invisible
... as preparation for removing it completely, make it an
invisible bool defaulting to yes.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-07-22 19:24:28 +10:00
Denys Vlasenko
f7f5b67557 Shrink struct module: CONFIG_UNUSED_SYMBOLS ifdefs
module.c and module.h conatains code for finding
exported symbols which are declared with EXPORT_UNUSED_SYMBOL,
and this code is compiled in even if CONFIG_UNUSED_SYMBOLS is not set
and thus there can be no EXPORT_UNUSED_SYMBOLs in modules anyway
(because EXPORT_UNUSED_SYMBOL(x) are compiled out to nothing then).

This patch adds required #ifdefs.

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-07-22 19:24:27 +10:00
Geert Uytterhoeven
fb6624ebd9 initrd: Fix virtual/physical mix-up in overwrite test
On recent kernels, I get the following error when using an initrd:

| initrd overwritten (0x00b78000 < 0x07668000) - disabling it.

My Amiga 4000 has 12 MiB of RAM at physical address 0x07400000 (virtual
0x00000000).
The initrd is located at the end of RAM: 0x00b78000 - 0x00c00000 (virtual).
The overwrite test compares the (virtual) initrd location to the (physical)
first available memory location, which fails.

This patch converts initrd_start to a page frame number, so it can safely be
compared with min_low_pfn.

Before the introduction of discontiguous memory support on m68k
(12d810c1b8), min_low_pfn was just left
untouched by the m68k-specific code (zero, I guess), and everything worked
fine.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20 17:24:40 -07:00
Ingo Molnar
f6dc8ccaab Merge branch 'linus' into core/generic-dma-coherent
Conflicts:

	kernel/Makefile

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-18 21:13:20 +02:00
Max Krasnyansky
e761b77252 cpu hotplug, sched: Introduce cpu_active_map and redo sched domain managment (take 2)
This is based on Linus' idea of creating cpu_active_map that prevents
scheduler load balancer from migrating tasks to the cpu that is going
down.

It allows us to simplify domain management code and avoid unecessary
domain rebuilds during cpu hotplug event handling.

Please ignore the cpusets part for now. It needs some more work in order
to avoid crazy lock nesting. Although I did simplfy and unify domain
reinitialization logic. We now simply call partition_sched_domains() in
all the cases. This means that we're using exact same code paths as in
cpusets case and hence the test below cover cpusets too.
Cpuset changes to make rebuild_sched_domains() callable from various
contexts are in the separate patch (right next after this one).

This not only boots but also easily handles
	while true; do make clean; make -j 8; done
and
	while true; do on-off-cpu 1; done
at the same time.
(on-off-cpu 1 simple does echo 0/1 > /sys/.../cpu1/online thing).

Suprisingly the box (dual-core Core2) is quite usable. In fact I'm typing
this on right now in gnome-terminal and things are moving just fine.

Also this is running with most of the debug features enabled (lockdep,
mutex, etc) no BUG_ONs or lockdep complaints so far.

I believe I addressed all of the Dmitry's comments for original Linus'
version. I changed both fair and rt balancer to mask out non-active cpus.
And replaced cpu_is_offline() with !cpu_active() in the main scheduler
code where it made sense (to me).

Signed-off-by: Max Krasnyanskiy <maxk@qualcomm.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Gregory Haskins <ghaskins@novell.com>
Cc: dmitry.adamushko@gmail.com
Cc: pj@sgi.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-18 13:22:25 +02:00
Linus Torvalds
9c1be0c471 Merge branch 'for_linus' of git://git.infradead.org/~dedekind/ubifs-2.6
* 'for_linus' of git://git.infradead.org/~dedekind/ubifs-2.6:
  UBIFS: include to compilation
  UBIFS: add new flash file system
  UBIFS: add brief documentation
  MAINTAINERS: add UBIFS section
  do_mounts: allow UBI root device name
  VFS: export sync_sb_inodes
  VFS: move inode_lock into sync_sb_inodes
2008-07-16 15:02:57 -07:00
Linus Torvalds
59190f4213 Merge branch 'generic-ipi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'generic-ipi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (22 commits)
  generic-ipi: more merge fallout
  generic-ipi: merge fix
  x86, visws: use mach-default/entry_arch.h
  x86, visws: fix generic-ipi build
  generic-ipi: fixlet
  generic-ipi: fix s390 build bug
  generic-ipi: fix linux-next tree build failure
  fix: "smp_call_function: get rid of the unused nonatomic/retry argument"
  fix: "smp_call_function: get rid of the unused nonatomic/retry argument"
  fix "smp_call_function: get rid of the unused nonatomic/retry argument"
  on_each_cpu(): kill unused 'retry' parameter
  smp_call_function: get rid of the unused nonatomic/retry argument
  sh: convert to generic helpers for IPI function calls
  parisc: convert to generic helpers for IPI function calls
  mips: convert to generic helpers for IPI function calls
  m32r: convert to generic helpers for IPI function calls
  arm: convert to generic helpers for IPI function calls
  alpha: convert to generic helpers for IPI function calls
  ia64: convert to generic helpers for IPI function calls
  powerpc: convert to generic helpers for IPI function calls
  ...

Fix trivial conflicts due to rcu updates in kernel/rcupdate.c manually
2008-07-15 14:12:03 -07:00
Ingo Molnar
1a781a777b Merge branch 'generic-ipi' into generic-ipi-for-linus
Conflicts:

	arch/powerpc/Kconfig
	arch/s390/kernel/time.c
	arch/x86/kernel/apic_32.c
	arch/x86/kernel/cpu/perfctr-watchdog.c
	arch/x86/kernel/i8259_64.c
	arch/x86/kernel/ldt.c
	arch/x86/kernel/nmi_64.c
	arch/x86/kernel/smpboot.c
	arch/x86/xen/smp.c
	include/asm-x86/hw_irq_32.h
	include/asm-x86/hw_irq_64.h
	include/asm-x86/mach-default/irq_vectors.h
	include/asm-x86/mach-voyager/irq_vectors.h
	include/asm-x86/smp.h
	kernel/Makefile

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-15 21:55:59 +02:00
Ingo Molnar
6c9fcaf2ee Merge branch 'core/rcu' into core/rcu-for-linus 2008-07-15 21:10:12 +02:00
Adrian Hunter
2d62f48858 do_mounts: allow UBI root device name
Similarly to MTD devices, allow UBI devices.

Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
2008-07-14 19:10:52 +03:00
Dmitry Baryshkov
ee7e5516be generic: per-device coherent dma allocator
Currently x86_32, sh and cris-v32 provide per-device coherent dma
memory allocator.

However their implementation is nearly identical. Refactor out
common code to be reused by them.

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-30 12:51:05 +02:00
Jens Axboe
3d44223327 Add generic helpers for arch IPI function calls
This adds kernel/smp.c which contains helpers for IPI function calls. In
addition to supporting the existing smp_call_function() in a more efficient
manner, it also adds a more scalable variant called smp_call_function_single()
for calling a given function on a single CPU only.

The core of this is based on the x86-64 patch from Nick Piggin, lots of
changes since then. "Alan D. Brunelle" <Alan.Brunelle@hp.com> has
contributed lots of fixes and suggestions as well. Also thanks to
Paul E. McKenney <paulmck@linux.vnet.ibm.com> for reviewing RCU usage
and getting rid of the data allocation fallback deadlock.

Acked-by: Ingo Molnar <mingo@elte.hu>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-06-26 11:21:34 +02:00
Alok Kataria
f3f3149f35 x86: use cpu_khz for loops_per_jiffy calculation, cleanup
As suggested by Ingo, remove all references to tsc from init/calibrate.c

TSC is x86 specific, and using tsc in variable names in a generic file should
be avoided. lpj_tsc is now called lpj_fine, since it is related to fine tuning
of lpj value. Also tsc_rate_*  is called timer_rate_*

Signed-off-by: Alok N Kataria <akataria@vmware.com>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Daniel Hecht <dhecht@vmware.com>
Cc: Tim Mann <mann@vmware.com>
Cc: Zach Amsden <zach@vmware.com>
Cc: Sahil Rihan <srihan@vmware.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-24 13:53:46 +02:00
Alok Kataria
3da757daf8 x86: use cpu_khz for loops_per_jiffy calculation
On the x86 platform we can use the value of tsc_khz computed during tsc
calibration to calculate the loops_per_jiffy value. Its very important
to keep the error in lpj values to minimum as any error in that may
result in kernel panic in check_timer. In virtualization environment, On
a highly overloaded host the guest delay calibration may sometimes
result in errors beyond the ~50% that timer_irq_works can handle,
resulting in the guest panicking.

Does some formating changes to lpj_setup code to now have a single
printk to print the bogomips value.

We do this only for the boot processor because the AP's can have
different base frequencies or the BIOS might boot a AP at a different
frequency.

Signed-off-by: Alok N Kataria <akataria@vmware.com>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Daniel Hecht <dhecht@vmware.com>
Cc: Tim Mann <mann@vmware.com>
Cc: Zach Amsden <zach@vmware.com>
Cc: Sahil Rihan <srihan@vmware.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-23 22:51:33 +02:00
Ingo Molnar
766d02786e Merge branch 'linus' into core/rcu 2008-06-16 11:23:36 +02:00
Sam Ravnborg
73531905ed Kconfig: introduce ARCH_DEFCONFIG to DEFCONFIG_LIST
init/Kconfig contains a list of configs that are searched
for if 'make *config' are used with no .config present.
Extend this list to look at the config identified by
ARCH_DEFCONFIG.

With this change we now try the defconfig targets last.

This fixes a regression reported
by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
2008-05-25 23:03:18 +02:00
Adrian Bunk
03de250a26 md: proper extern for mdp_major
This patch adds a proper extern for mdp_major in include/linux/raid/md.h

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-24 09:56:09 -07:00
Paul E. McKenney
4446a36ff8 rcu: add call_rcu_sched()
Fourth cut of patch to provide the call_rcu_sched().  This is again to
synchronize_sched() as call_rcu() is to synchronize_rcu().

Should be fine for experimental and -rt use, but not ready for inclusion.
With some luck, I will be able to tell Andrew to come out of hiding on
the next round.

Passes multi-day rcutorture sessions with concurrent CPU hotplugging.

Fixes since the first version include a bug that could result in
indefinite blocking (spotted by Gautham Shenoy), better resiliency
against CPU-hotplug operations, and other minor fixes.

Fixes since the second version include reworking grace-period detection
to avoid deadlocks that could happen when running concurrently with
CPU hotplug, adding Mathieu's fix to avoid the softlockup messages,
as well as Mathieu's fix to allow use earlier in boot.

Fixes since the third version include a wrong-CPU bug spotted by
Andrew, getting rid of the obsolete synchronize_kernel API that somehow
snuck back in, merging spin_unlock() and local_irq_restore() in a
few places, commenting the code that checks for quiescent states based
on interrupting from user-mode execution or the idle loop, removing
some inline attributes, and some code-style changes.

Known/suspected shortcomings:

o	I still do not entirely trust the sleep/wakeup logic.  Next step
	will be to use a private snapshot of the CPU online mask in
	rcu_sched_grace_period() -- if the CPU wasn't there at the start
	of the grace period, we don't need to hear from it.  And the
	bit about accounting for changes in online CPUs inside of
	rcu_sched_grace_period() is ugly anyway.

o	It might be good for rcu_sched_grace_period() to invoke
	resched_cpu() when a given CPU wasn't responding quickly,
	but resched_cpu() is declared static...

This patch also fixes a long-standing bug in the earlier preemptable-RCU
implementation of synchronize_rcu() that could result in loss of
concurrent external changes to a task's CPU affinity mask.  I still cannot
remember who reported this...

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-19 10:01:36 +02:00
Cyrill Gorcunov
a76bfd0da2 initcalls: Fix m68k build and possible buffer overflow
This patch fixes a build bug on m68k - gcc decides to emit a call to the
strlen library function, which we don't implement.

More importantly - my previous patch "init: don't lose initcall return
values" (commit e662e1cfd4) had introduced
potential buffer overflow by wrong calculation of string accumulator
size.

Use strlcat() instead, fixing both bugs.

Many thanks Andreas Schwab and Geert Uytterhoeven for helping
to catch and fix the bug.

Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-15 18:20:06 -07:00
Linus Torvalds
e0df154f45 Split up 'do_initcalls()' into two simpler functions
One function to just loop over the entries, one function to actually do
the call and the associated debugging code.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-15 18:14:01 -07:00
Linus Torvalds
a442ac512f Clean up 'print_fn_descriptor_symbol()' types
Everybody wants to pass it a function pointer, and in fact, that is what
you _must_ pass it for it to make sense (since it knows that ia64 and
ppc64 use descriptors for function pointers and fetches the actual
address from there).

So don't make the argument be a 'unsigned long' and force everybody to
add a cast.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-15 17:50:37 -07:00
Kay Sievers
30f2f0eb4b block: do_mounts - accept root=<non-existant partition>
Some devices, like md, may create partitions only at first access,
so allow root= to be set to a valid non-existant partition of an
existing disk. This applies only to non-initramfs root mounting.

This fixes a regression from 2.6.24 which did allow this to happen and
broke some users machines :(

Acked-by: Neil Brown <neilb@suse.de>
Tested-by: Joao Luis Meloni Assirati <assirati@nonada.if.usp.br>
Cc: stable <stable@kernel.org>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-14 10:37:57 -07:00
Cyrill Gorcunov
e662e1cfd4 init: don't lose initcall return values
There is an ability to lose an initcall return value if it happened with irq
disabled or imbalanced preemption (and if we debug initcall).

Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-13 08:02:25 -07:00
Rusty Russell
91e37a793b module: don't ignore vermagic string if module doesn't have modversions
Linus found a logic bug: we ignore the version number in a module's
vermagic string if we have CONFIG_MODVERSIONS set, but modversions
also lets through a module with no __versions section for modprobe
--force (with tainting, but still).

We should only ignore the start of the vermagic string if the module
actually *has* crcs to check.  Rather than (say) having an
entertaining hissy fit and creating a config option to work around the
buggy code.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-09 07:45:18 -07:00
Stas Sergeev
e5e1d3cb20 pcspkr: fix dependancies
fix pcspkr dependancies: make the pcspkr platform
drivers to depend on a platform device, and
not the other way around.

Signed-off-by: Stas Sergeev <stsp@aknet.ru>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
CC: Vojtech Pavlik <vojtech@suse.cz>
CC: Michael Opdenacker <michael-lists@free-electrons.com>
[fixed for 2.6.26-rc1 by tiwai]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-05-07 12:42:03 +02:00