Commit Graph

400 Commits

Author SHA1 Message Date
Albin Tonnerre
e7db7b4270 arm: add support for LZO-compressed kernels
- changes to ach/arch/boot/Makefile to make it easier to add new
   compression types
 - new piggy.lzo.S necessary for lzo compression
 - changes in arch/arm/boot/compressed/misc.c to allow the use of lzo or
   gzip, depending on the config
 - Kconfig support

Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com>
Tested-by: Wu Zhangjin <wuzhangjin@gmail.com>
Acked-by: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Russell King <rmk@arm.linux.org.uk>
Acked-by: Russell King <rmk@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-11 09:34:05 -08:00
Sekhar Nori
ae88e05a5a davinci: enable ARCH_HAS_HOLES_MEMORYMODEL for DaVinci
All DaVinci platforms include a DSP or co-processor for
audio/video acceleration.

While creating memory for the DSP/co-processor, system
integrator can end up creating a hole in the memory map
of the sort:

<kernel memory> <hole (memory for DSP)> <kernel memory>

This sort of configuration needs ARCH_HAS_HOLES_MEMORYMODEL
enabled. See further details see this discussion on ARM
linux mailing list:
http://www.mail-archive.com/linux-omap@vger.kernel.org/msg15262.html

The patch is boot tested on OMAP-L138, DM6446 and DM355 EVMs

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
CC: Sriramakrishnan <srk@ti.com>
CC: Khasim Syed Mohammed <khasim@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-01-06 08:57:44 -08:00
Russell King
1937f5b918 ARM: fix sa1100 build
Fix:

arch/arm/mach-sa1100/generic.c:117: error: redefinition of 'cpufreq_get'
include/linux/cpufreq.h:299: error: previous definition of 'cpufreq_get' was here

cpufreq_get() is used on these platforms to tell drivers what the CPU
frequency is, and therefore the bus frequency - which is critical for
setting the PCMCIA and LCD timings.  Adding ifdefs to these drivers to
select cpufreq_get() or some other interface adds confusion.  Making
these drivers use some other interface for the normal paths and cpufreq
stuff for the cpufreq notifier is insane as well.

(Why x86 can't provide a version of cpufreq_get() which returns the
CPU frequency when CPUFREQ is disabled is beyond me, rather than
requiring a dummy zero-returning cpufreq_get().  Especially as they
do:

			unsigned long khz = cpufreq_get(cpu);
			if (!khz)
				khz = tsc_khz;

In other words, if CPUFREQ is disabled, get it from tsc_khz - why
not provide a dummy cpufreq_get() which returns tsc_khz?)

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-13 19:38:08 +00:00
Russell King
0719dc3413 Merge branch 'devel-stable' into devel 2009-12-05 10:35:33 +00:00
Russell King
602fd7c367 Merge branch 'for-rmk' of git://git.fluff.org/bjdooks/linux into devel-stable
Conflicts:
	arch/arm/Kconfig
2009-12-04 17:33:54 +00:00
Russell King
d7931d9f7a Merge branch 'for-rmk' of git://git.marvell.com/orion into devel-stable 2009-12-01 18:22:54 +00:00
Ben Dooks
cf38367824 ARM: SAMSUNG: Add plat-samsung as starting point for plat-s3c* moves
We inted to re-organise the plat-s3c/plat-s3c24xx/plat-s3c64xx into a
more generic plat-samsung with less code in the other plat- directories
to make it easier to port new devices and try and clear up some of the
naming issues with newer devices.

Start by creating a small arch/arm/plat-samsung with no actuall code in
so we can move items in as we process them.

Add this to arch/arm to allow it to build things once support is added.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-12-01 01:28:37 +00:00
Srinidhi Kasagar
850265e84d ARM: 5834/1: ARM: U8500 integrate to ARM architecture
This hooks the U8500 support into the ARM kbuild
system. This integration also enables SMP and its
helper functions for U8500 platform

Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-11-28 10:22:53 +00:00
Srinidhi Kasagar
59b559d7a3 ARM: 5786/1: Introduce plat-nomadik, MTU code re-organization
Introduce the plat-nomadik folder for ST-Ericsson
machines including the existing nomadik 8815 architecture.
This also moves the existing MTU (MultiTimerUnit)
of nomadik 8815 to the proposed plat-nomadik and adds
HAS_MTU. The patch has been re-based to 2.6.32-rc6

Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com>
Acked-by: Alessandro Rubini <rubini@unipv.it>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-11-28 10:22:51 +00:00
Saeed Bishara
edabd38e1a ARM: add base support for Marvell Dove SoC
The Marvell Dove (88AP510) is a high-performance, highly integrated,
low power SoC with high-end ARM-compatible processor (known as PJ4),
graphics processing unit, high-definition video decoding acceleration
hardware, and a broad range of peripherals.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: Saeed Bishara <saeed@marvell.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-11-27 15:43:06 -05:00
Mikael Pettersson
980f2296b5 iop: enable generic time
This updates the IOP platform to use the kernel's generic time
framework. With clockevent support in place, this reduces to
selecting GENERIC_TIME and removing the platform's private timer
->offset() operation (iop_gettimeoffset).

Tested on n2100, compile-tested for all plat-iop machines.

Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-10-29 11:46:55 -07:00
Mikael Pettersson
469d30448d iop: clockevent support
This updates the IOP platform to expose the interrupting
timer 0 as a clockevent object. The timer interrupt handler
is changed to call the clockevent ->event_handler() instead
of timer_tick(), and ->set_next_event() and ->set_mode()
operations are added to allow the mode of the timer to be
updated (required for ONESHOT/NOHZ mode).

Timer 0 must now be properly initialised, which requires
a new write_tcr0() function from the mach-specific code.

The mode of timer 0 must be read at the start of ->set_mode(),
which requires a new read_tmr0() function from the mach-
specific code.

Initial setup of timer 0 is also rewritten to be more robust.

Tested on n2100, compile-tested for all plat-iop machines.

Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-10-29 11:46:54 -07:00
Linus Walleij
bc581770cf ARM: 5580/2: ARM TCM (Tightly-Coupled Memory) support v3
This adds the TCM interface to Linux, when active, it will
detect and report TCM memories and sizes early in boot if
present, introduce generic TCM memory handling, provide a
generic TCM memory pool and select TCM memory for the U300
platform.

See the Documentation/arm/tcm.txt for documentation.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-15 22:11:05 +01:00
Russell King
ddd559b13f Merge branch 'devel-stable' into devel
Conflicts:
	MAINTAINERS
	arch/arm/mm/fault.c
2009-09-12 12:02:26 +01:00
Russell King
cf7a2b4fb6 Merge branches 'arm', 'at91', 'bcmring', 'ep93xx', 'mach-types', 'misc' and 'w90x900' into devel 2009-09-12 12:01:34 +01:00
Russell King
7010381449 Merge branch 'nomadik' into devel-stable 2009-09-12 11:50:52 +01:00
Russell King
65cec8e3db ARM: implement highpte
Add the ARM implementation of highpte, which allows PTE tables to be
placed in highmem.  Unfortunately, we do not offer highpte support
when support for L2 cache is enabled.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-08-17 20:02:06 +01:00
Russell King
29c08460d4 Merge branch 'next-s3c' of git://aeryn.fluff.org.uk/bjdooks/linux into devel-stable 2009-08-17 18:16:28 +01:00
Byungho Min
5a7652f203 ARM: S5PC100: Kconfigs and Makefiles
S5PC100 is a new SoC with ARM coretex-A8 and numerous peripherals. This SoC is
successor of S3C64XX. S5PC100 has peripherals which are still similar to S3C
families so some drivers in "arch/arm/plat-s3c" can be shared. S5PC100 specific
drivers will be added in "arch/arm/plat-s5pcxx" or "arch/arm/mach-s5pc100"

Signed-off-by: Byungho Min <bhmin@samsung.com>
[ben-linux@fluff.org: tidy and edit description]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-08-16 23:35:19 +01:00
Russell King
9b2616c2e8 Merge branch 'for-rmk-2.6.32' of git://git.pengutronix.de/git/ukl/linux-2.6 into devel-stable 2009-08-15 16:51:48 +01:00
Leo Chen
6288e28dce ARM: 5641/1: bcmring: add Kconfig and Makefile entries in arch/arm
add bcmring option in Kconfig and add entry in Makefile
in arch/arm directory

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-08-15 16:01:51 +01:00
wanzongshun
a8bc4eadd9 ARM: 5676/1: Provide more useful introduction for w90x900
Provide more useful introduction for w90x900

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-08-15 15:49:04 +01:00
wanzongshun
58b5369e6e ARM: 5674/1: Add clocksource/clockevent support for w90p910 platform
Add clocksource/clockevent support for w90p910 platform.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-08-15 15:49:02 +01:00
Uwe Kleine-König
ac25150f2c [ARM] let arch/arm/Kconfig source drivers/Kconfig
The changes introduced by this change are:
  - drivers/mtd/Kconfig doesn't depend on ALIGNMENT_TRAP ||
    !CPU_CP15_MMU any more
  - the following files are sourced additionally:
    + drivers/macintosh/Kconfig
      completely depends on PPC || MAC || X86
    + drivers/telephony/Kconfig
      new
    + drivers/pps/Kconfig
      new
    + drivers/infiniband/Kconfig
      new
    + drivers/edac/Kconfig
      depends on X86 || PPC
    + drivers/vlynq/Kconfig
      depends on AR7 && EXPERIMENTAL (that is ARCH_MIPS)
    + drivers/xen/Kconfig
      everything depends on XEN
    + drivers/platform/Kconfig
      depends on X86
  - drivers/regulator/Kconfig is sourced later as is
    drivers/accessibility/Kconfig

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-08-13 21:09:21 +02:00
Uwe Kleine-König
d45a398fca Use kernel/Kconfig.preempt for ARM
before this patch ARM had it's own definition of CONFIG_PREEMPT.
Instead of that use the general definition provided in
kernel/Kconfig.preempt.

This patch changes the available options in *config.  Namely PREEMPT
isn't a stand alone bool anymore, but part of a 'choice' the
following Kconfig symbols are added:

	PREEMPT_NONE
	PREEMPT_VOLUNTARY

Selecting PREEMPT_NONE now produces exactly the code as not selecting
PREEMPT before (apart from a comment in
/sys/kernel/debug/tracing/(per_cpu/cpuX/)?trace).  The only difference
PREEMPT_VOLUNTARY does is that might_resched might reschedule.  Both
should't introduce regressions.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>
2009-08-13 20:34:38 +02:00
Ben Dooks
e6d197a695 ARM: S3C: CPUFREQ: Add debugfs support for cpufreq
Add debugfs support for the cpufreq driver to allow
information about the system state to be exported to
the user.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-07-30 23:22:56 +01:00
Ben Dooks
9d56c02a5a ARM: Add S3C24XX to CPUFreq KConfig
Add the S3C24XX to the main ARM CPUFreq Kconfig support list.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-07-30 23:22:52 +01:00
Ben Dooks
89c52ed468 ARM: Add ARCH_HAS_CPUFREQ for presence of CPUFREQ driver
Add ARCH_HAS_CPUFREQ so that each machine config can select
it if they have CPUFREQ driver support. This means that the
CPUFREQ specific area does not need the if statement updating
each time a new machine is added.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-07-30 23:22:52 +01:00
Hyok S. Choi
3c4279750c nommu: Enables to select noMMU mode
MMU option is now selectable.

Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com>
2009-07-24 12:35:00 +01:00
Catalin Marinas
16c79651a5 Thumb-2: Add Thumb-2 support to the build files
This patch adds the necessary entries to the Makefile and Kconfig
files for building the Thumb-2 kernel.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-07-24 12:33:02 +01:00
Catalin Marinas
0becb08850 Thumb-2: Add macros for the unified assembler syntax
This patch adds various C and assembler macros that help with using
the unified assembler syntax for compiling files to either ARM or
Thumb-2 modes.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-07-24 12:32:53 +01:00
wanzongshun
d2c2419550 [ARM] 5601/1: Add HAVE_CLK depends on for w90p910 platform
Add HAVE_CLK depends on for w90p910 platform.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-17 13:38:17 +01:00
Russell King
eb7fffa39a [ARM] realview: add PL061 gpiolib support
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-06 17:00:43 +01:00
Russell King
bbeddc43e6 [ARM] versatile: add PL061 gpiolib support
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-06 12:02:14 +01:00
Alessandro Rubini
2ec1d35945 [ARM] 5584/1: nomadik: add gpio driver and devices
Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-02 21:20:45 +01:00
Alessandro Rubini
28ad94ec61 [ARM] 5590/1: Add basic support for ST Nomadik 8815 SoC and evaluation board
This patch adds the basic infrastructure for the Nomadik 8815
CPU and the "Nomadik Hardware Kit" NHK8815. This patch only
includes the serial console and core stuff, no drivers.

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-02 21:20:44 +01:00
Mark Brown
b3748ddd80 [ARM] S3C64XX: Initial support for DVFS
This patch provides initial support for CPU frequency scaling on the
Samsung S3C ARM processors. Currently only S3C6410 processors are
supported, though addition of another data table with supported clock
rates should be sufficient to enable support for further CPUs.

Use the regulator framework to provide optional support for DVFS in
the S3C cpufreq driver. When a software controllable regulator is
configured the driver will use it to lower the supply voltage when
running at a lower frequency, giving improved power savings.

When regulator support is disabled or no regulator can be obtained
for VDDARM the driver will fall back to scaling only the frequency.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-16 23:36:24 +01:00
Russell King
b7c11ec9f1 Merge branch 'u300' into devel
Conflicts:
	arch/arm/Makefile
Updates:
	arch/arm/mach-u300/core.c
	arch/arm/mach-u300/timer.c
2009-06-14 11:01:44 +01:00
Russell King
0609996100 Merge branch 'stmp' into devel 2009-06-14 11:01:05 +01:00
Russell King
98797a241e Merge branch 'copy_user' of git://git.marvell.com/orion into devel 2009-06-14 10:59:32 +01:00
Russell King
42578c82e0 Merge branch 'for-rmk' of git://linux-arm.org/linux-2.6 into devel
Conflicts:
	arch/arm/Kconfig
	arch/arm/kernel/smp.c
	arch/arm/mach-realview/Makefile
	arch/arm/mach-realview/platsmp.c
2009-06-11 15:35:00 +01:00
Russell King
2631182bf9 Merge branch 'w90x900' into devel 2009-06-11 15:23:26 +01:00
wanzongshun
0e4a34bb65 [ARM] 5549/1: Add clock api for w90p910 platform.
Add clock api for w90p910 platform.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-11 14:45:18 +01:00
wanzongshun
c52d3d688b [ARM] 5548/1: Add gpio api for w90p910 platform
Add gpio api for w90p910 platform.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-11 14:45:17 +01:00
Russell King
1ee73784b6 Merge branch 'for_rmk' of git://dev.omapzoom.org/pub/scm/santosh/kernel-omap4-base into devel 2009-06-10 22:38:27 +01:00
Santosh Shilimkar
934f8be7b1 ARM: OMAP4: SMP: Enable SMP support for OMAP4430
This patch enables SMP on OMAP4430 SDP platform.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2009-06-09 13:04:06 +05:30
Russell King
7698fdedcf Merge branch 'for-rmk' of git://git.marvell.com/orion into devel 2009-06-08 19:27:13 +01:00
Erik Benada
a88656553d [ARM] orion: convert gpio to use gpiolib
Signed-off-by: Erik Benada <erikbenada@yahoo.ca>

[ nico: fix locking, additional cleanups ]

Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-06-08 13:04:57 -04:00
Russell King
c7f7ff179c Merge branch 'smp' into devel 2009-06-01 18:35:26 +01:00
Russell King
a22f277bba [ARM] Kconfig: remove 'default n'
Kconfig entries default to n, so there's no need for this to be
explicitly specified.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-31 15:12:25 +01:00