Commit Graph

3885 Commits

Author SHA1 Message Date
Linus Torvalds
f5e7e844a5 - More robust parsing especially of xattr data in JFFS2
- Updates to mxc_nand and gpmi drivers to support new boards and device tree
  - Improve consistency of information about ECC strength in NAND devices
  - Clean up partition handling of plat_nand
  - Support NAND drivers without dedicated access to OOB area
  - BCH hardware ECC support for OMAP
  - Other fixes and cleanups, and a few new device IDs
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iEYEABECAAYFAk/JG1wACgkQdwG7hYl686M80wCglN4kutx20j+KJWuZofkr9Hog
 weEAoI4jrqEWEdW9EcT2CIWQw7eG+1v+
 =7tdo
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-3.5-20120601' of git://git.infradead.org/linux-mtd

Pull mtd update from David Woodhouse:
 - More robust parsing especially of xattr data in JFFS2
 - Updates to mxc_nand and gpmi drivers to support new boards and device tree
 - Improve consistency of information about ECC strength in NAND devices
 - Clean up partition handling of plat_nand
 - Support NAND drivers without dedicated access to OOB area
 - BCH hardware ECC support for OMAP
 - Other fixes and cleanups, and a few new device IDs

Fixed trivial conflict in drivers/mtd/nand/gpmi-nand/gpmi-nand.c due to
added include files next to each other.

* tag 'for-linus-3.5-20120601' of git://git.infradead.org/linux-mtd: (75 commits)
  mtd: mxc_nand: move ecc strengh setup before nand_scan_tail
  mtd: block2mtd: fix recursive call of mtd_writev
  mtd: gpmi-nand: define ecc.strength
  mtd: of_parts: fix breakage in Kconfig
  mtd: nand: fix scan_read_raw_oob
  mtd: docg3 fix in-middle of blocks reads
  mtd: cfi_cmdset_0002: Slight cleanup of fixup messages
  mtd: add fixup for S29NS512P NOR flash.
  jffs2: allow to complete xattr integrity check on first GC scan
  jffs2: allow to discriminate between recoverable and non-recoverable errors
  mtd: nand: omap: add support for hardware BCH ecc
  ARM: OMAP3: gpmc: add BCH ecc api and modes
  mtd: nand: check the return code of 'read_oob/read_oob_raw'
  mtd: nand: remove 'sndcmd' parameter of 'read_oob/read_oob_raw'
  mtd: m25p80: Add support for Winbond W25Q80BW
  jffs2: get rid of jffs2_sync_super
  jffs2: remove unnecessary GC pass on sync
  jffs2: remove unnecessary GC pass on umount
  jffs2: remove lock_super
  mtd: gpmi: add gpmi support for mx6q
  ...
2012-06-01 16:55:42 -07:00
Linus Torvalds
86c47b70f6 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal
Pull third pile of signal handling patches from Al Viro:
 "This time it's mostly helpers and conversions to them; there's a lot
  of stuff remaining in the tree, but that'll either go in -rc2
  (isolated bug fixes, ideally via arch maintainers' trees) or will sit
  there until the next cycle."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal:
  x86: get rid of calling do_notify_resume() when returning to kernel mode
  blackfin: check __get_user() return value
  whack-a-mole with TIF_FREEZE
  FRV: Optimise the system call exit path in entry.S [ver #2]
  FRV: Shrink TIF_WORK_MASK [ver #2]
  FRV: Prevent syscall exit tracing and notify_resume at end of kernel exceptions
  new helper: signal_delivered()
  powerpc: get rid of restore_sigmask()
  most of set_current_blocked() callers want SIGKILL/SIGSTOP removed from set
  set_restore_sigmask() is never called without SIGPENDING (and never should be)
  TIF_RESTORE_SIGMASK can be set only when TIF_SIGPENDING is set
  don't call try_to_freeze() from do_signal()
  pull clearing RESTORE_SIGMASK into block_sigmask()
  sh64: failure to build sigframe != signal without handler
  openrisc: tracehook_signal_handler() is supposed to be called on success
  new helper: sigmask_to_save()
  new helper: restore_saved_sigmask()
  new helpers: {clear,test,test_and_clear}_restore_sigmask()
  HAVE_RESTORE_SIGMASK is defined on all architectures now
2012-06-01 11:53:44 -07:00
Linus Torvalds
1193755ac6 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs changes from Al Viro.
 "A lot of misc stuff.  The obvious groups:
   * Miklos' atomic_open series; kills the damn abuse of
     ->d_revalidate() by NFS, which was the major stumbling block for
     all work in that area.
   * ripping security_file_mmap() and dealing with deadlocks in the
     area; sanitizing the neighborhood of vm_mmap()/vm_munmap() in
     general.
   * ->encode_fh() switched to saner API; insane fake dentry in
     mm/cleancache.c gone.
   * assorted annotations in fs (endianness, __user)
   * parts of Artem's ->s_dirty work (jff2 and reiserfs parts)
   * ->update_time() work from Josef.
   * other bits and pieces all over the place.

  Normally it would've been in two or three pull requests, but
  signal.git stuff had eaten a lot of time during this cycle ;-/"

Fix up trivial conflicts in Documentation/filesystems/vfs.txt (the
'truncate_range' inode method was removed by the VM changes, the VFS
update adds an 'update_time()' method), and in fs/btrfs/ulist.[ch] (due
to sparse fix added twice, with other changes nearby).

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (95 commits)
  nfs: don't open in ->d_revalidate
  vfs: retry last component if opening stale dentry
  vfs: nameidata_to_filp(): don't throw away file on error
  vfs: nameidata_to_filp(): inline __dentry_open()
  vfs: do_dentry_open(): don't put filp
  vfs: split __dentry_open()
  vfs: do_last() common post lookup
  vfs: do_last(): add audit_inode before open
  vfs: do_last(): only return EISDIR for O_CREAT
  vfs: do_last(): check LOOKUP_DIRECTORY
  vfs: do_last(): make ENOENT exit RCU safe
  vfs: make follow_link check RCU safe
  vfs: do_last(): use inode variable
  vfs: do_last(): inline walk_component()
  vfs: do_last(): make exit RCU safe
  vfs: split do_lookup()
  Btrfs: move over to use ->update_time
  fs: introduce inode operation ->update_time
  reiserfs: get rid of resierfs_sync_super
  reiserfs: mark the superblock as dirty a bit later
  ...
2012-06-01 10:34:35 -07:00
Al Viro
efee984c27 new helper: signal_delivered()
Does block_sigmask() + tracehook_signal_handler();  called when
sigframe has been successfully built.  All architectures converted
to it; block_sigmask() itself is gone now (merged into this one).

I'm still not too happy with the signature, but that's a separate
story (IMO we need a structure that would contain signal number +
siginfo + k_sigaction, so that get_signal_to_deliver() would fill one,
signal_delivered(), handle_signal() and probably setup...frame() -
take one).

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01 12:58:52 -04:00
Al Viro
77097ae503 most of set_current_blocked() callers want SIGKILL/SIGSTOP removed from set
Only 3 out of 63 do not.  Renamed the current variant to __set_current_blocked(),
added set_current_blocked() that will exclude unblockable signals, switched
open-coded instances to it.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01 12:58:51 -04:00
Al Viro
edd63a2763 set_restore_sigmask() is never called without SIGPENDING (and never should be)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01 12:58:50 -04:00
Al Viro
a610d6e672 pull clearing RESTORE_SIGMASK into block_sigmask()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01 12:58:49 -04:00
Al Viro
5754f412a3 sh64: failure to build sigframe != signal without handler
it's actually "send me SIGSEGV"...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01 12:58:49 -04:00
Al Viro
b7f9a11a6c new helper: sigmask_to_save()
replace boilerplate "should we use ->saved_sigmask or ->blocked?"
with calls of obvious inlined helper...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01 12:58:48 -04:00
Al Viro
51a7b448d4 new helper: restore_saved_sigmask()
first fruits of ..._restore_sigmask() helpers: now we can take
boilerplate "signal didn't have a handler, clear RESTORE_SIGMASK
and restore the blocked mask from ->saved_mask" into a common
helper.  Open-coded instances switched...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01 12:58:47 -04:00
Al Viro
4ebefe3ec7 new helpers: {clear,test,test_and_clear}_restore_sigmask()
helpers parallel to set_restore_sigmask(), used in the next commits

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01 12:58:47 -04:00
Linus Torvalds
fb21affa49 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal
Pull second pile of signal handling patches from Al Viro:
 "This one is just task_work_add() series + remaining prereqs for it.

  There probably will be another pull request from that tree this
  cycle - at least for helpers, to get them out of the way for per-arch
  fixes remaining in the tree."

Fix trivial conflict in kernel/irq/manage.c: the merge of Andrew's pile
had brought in commit 97fd75b7b8 ("kernel/irq/manage.c: use the
pr_foo() infrastructure to prefix printks") which changed one of the
pr_err() calls that this merge moves around.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal:
  keys: kill task_struct->replacement_session_keyring
  keys: kill the dummy key_replace_session_keyring()
  keys: change keyctl_session_to_parent() to use task_work_add()
  genirq: reimplement exit_irq_thread() hook via task_work_add()
  task_work_add: generic process-context callbacks
  avr32: missed _TIF_NOTIFY_RESUME on one of do_notify_resume callers
  parisc: need to check NOTIFY_RESUME when exiting from syscall
  move key_repace_session_keyring() into tracehook_notify_resume()
  TIF_NOTIFY_RESUME is defined on all targets now
2012-05-31 18:47:30 -07:00
Anton Vorontsov
1198c8b9af sh: use clear_tasks_mm_cpumask()
Checking for process->mm is not enough because process' main thread may
exit or detach its mm via use_mm(), but other threads may still have a
valid mm.

To fix this we would need to use find_lock_task_mm(), which would walk up
all threads and returns an appropriate task (with task lock held).

clear_tasks_mm_cpumask() has the issue fixed, so let's use it.

Suggested-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31 17:49:30 -07:00
Al Viro
bb8ac181a5 bury __kernel_nlink_t, make internal nlink_t consistent
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-30 21:04:50 -04:00
Linus Torvalds
07acfc2a93 Merge branch 'next' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM changes from Avi Kivity:
 "Changes include additional instruction emulation, page-crossing MMIO,
  faster dirty logging, preventing the watchdog from killing a stopped
  guest, module autoload, a new MSI ABI, and some minor optimizations
  and fixes.  Outside x86 we have a small s390 and a very large ppc
  update.

  Regarding the new (for kvm) rebaseless workflow, some of the patches
  that were merged before we switch trees had to be rebased, while
  others are true pulls.  In either case the signoffs should be correct
  now."

Fix up trivial conflicts in Documentation/feature-removal-schedule.txt
arch/powerpc/kvm/book3s_segment.S and arch/x86/include/asm/kvm_para.h.

I suspect the kvm_para.h resolution ends up doing the "do I have cpuid"
check effectively twice (it was done differently in two different
commits), but better safe than sorry ;)

* 'next' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (125 commits)
  KVM: make asm-generic/kvm_para.h have an ifdef __KERNEL__ block
  KVM: s390: onereg for timer related registers
  KVM: s390: epoch difference and TOD programmable field
  KVM: s390: KVM_GET/SET_ONEREG for s390
  KVM: s390: add capability indicating COW support
  KVM: Fix mmu_reload() clash with nested vmx event injection
  KVM: MMU: Don't use RCU for lockless shadow walking
  KVM: VMX: Optimize %ds, %es reload
  KVM: VMX: Fix %ds/%es clobber
  KVM: x86 emulator: convert bsf/bsr instructions to emulate_2op_SrcV_nobyte()
  KVM: VMX: unlike vmcs on fail path
  KVM: PPC: Emulator: clean up SPR reads and writes
  KVM: PPC: Emulator: clean up instruction parsing
  kvm/powerpc: Add new ioctl to retreive server MMU infos
  kvm/book3s: Make kernel emulated H_PUT_TCE available for "PR" KVM
  KVM: PPC: bookehv: Fix r8/r13 storing in level exception handler
  KVM: PPC: Book3S: Enable IRQs during exit handling
  KVM: PPC: Fix PR KVM on POWER7 bare metal
  KVM: PPC: Fix stbux emulation
  KVM: PPC: bookehv: Use lwz/stw instead of PPC_LL/PPC_STL for 32-bit fields
  ...
2012-05-24 16:17:30 -07:00
Linus Torvalds
b1bf7d4d1b GPIO driver changes for v3.5 merge window
Lots of gpio changes, both to core code and drivers.  Changes do touch
 architecture code to remove the need for separate arm/gpio.h includes
 in most architectures.  Some new drivers are added, and a number of
 gpio drivers are converted to use irq_domains for gpio inputs used as
 interrupts.  Device tree support has been amended to allow multiple
 gpio_chips to use the same device tree node.  Remaining changes are
 primarily bug fixes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPvpFBAAoJEEFnBt12D9kB50EP/0q2co+Ddlz4DWM07TLMgTw8
 eCSi79+oB85RcE+0FlAo/SJu9VlYDKSLT3wMbIyycfJi3cUtOb+hay0j+wxcn4bz
 G2qXj2Het5rX6hFI2tSCvJfDqMwU0wEygn9a6a/bw3VGSOIVmMTmRswrbbBcFzVu
 8xobviN7LANLEZyhd4Ip5YfrcWH9ABmmhZX7ihn1AJubVL47xGo0uds9ZFX1sAKB
 Zyr80+BeUK7mhZ74UUfQHtS+x24JD62OLM9eaQN0/BBAqBewQJlxhMakPbTGmcuO
 Vy3CPmZiWw6tdVWgKvxE7cIXLI4YbB2B6w2TRJBBkFAlz4RsO2bFU/ibEv1vg9YE
 oxAUelMj0INdY4iRT135fDJTIGauWon22Tqd2MVtun4r6fwcL0BgFYN6yCMtEqbx
 bpYkKTi6tdyE7k2Ph+carCIuw9SwOk/4pm1xCWC0k6YdAnRE0zykCLvAuAabpmzs
 i/H1jcp/F4KSYldEoDlGYG4lFZiISthxOy9l6/d4GrBj723attrmztolMfrpFLF6
 XPTf7HODQFmZ6n7mBIjCg4hoqydAYyKcW7lROc7DKkEXIWOeeeA+EoTytkwPLLz5
 CBLoZfDoqUT8xa2vv4MZ/+G9chSDi5vMryqEYi9tXMbVEZW31xqh6hxk0xPMcY13
 qVAaRlcz49AQjWq/0vR4
 =U6hj
 -----END PGP SIGNATURE-----

Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6

Pull GPIO driver changes from Grant Likely:
 "Lots of gpio changes, both to core code and drivers.

  Changes do touch architecture code to remove the need for separate
  arm/gpio.h includes in most architectures.

  Some new drivers are added, and a number of gpio drivers are converted
  to use irq_domains for gpio inputs used as interrupts.  Device tree
  support has been amended to allow multiple gpio_chips to use the same
  device tree node.

  Remaining changes are primarily bug fixes."

* tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6: (33 commits)
  gpio/generic: initialize basic_mmio_gpio shadow variables properly
  gpiolib: Remove 'const' from data argument of gpiochip_find()
  gpio/rc5t583: add gpio driver for RICOH PMIC RC5T583
  gpiolib: quiet gpiochip_add boot message noise
  gpio: mpc8xxx: Prevent NULL pointer deref in demux handler
  gpio/lpc32xx: Add device tree support
  gpio: Adjust of_xlate API to support multiple GPIO chips
  gpiolib: Implement devm_gpio_request_one()
  gpio-mcp23s08: dbg_show: fix pullup configuration display
  Add support for TCA6424A
  gpio/omap: (re)fix wakeups on level-triggered GPIOs
  gpio/omap: fix broken context restore for non-OFF mode transitions
  gpio/omap: fix missing check in *_runtime_suspend()
  gpio/omap: remove cpu_is_omapxxxx() checks from *_runtime_resume()
  gpio/omap: remove suspend/resume callbacks
  gpio/omap: remove retrigger variable in gpio_irq_handler
  gpio/omap: remove saved_wakeup field from struct gpio_bank
  gpio/omap: remove suspend_wakeup field from struct gpio_bank
  gpio/omap: remove saved_fallingdetect, saved_risingdetect
  gpio/omap: remove virtual_irq_start variable
  ...

Conflicts:
	drivers/gpio/gpio-samsung.c
2012-05-24 14:01:46 -07:00
Linus Torvalds
c7523a7c88 Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner.

Various trivial conflict fixups in arch Kconfig due to addition of
unrelated entries nearby.  And one slightly more subtle one for sparc32
(new user of GENERIC_CLOCKEVENTS), fixed up as per Thomas.

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits)
  timekeeping: Fix a few minor newline issues.
  time: remove obsolete declaration
  ntp: Fix a stale comment and a few stray newlines.
  ntp: Correct TAI offset during leap second
  timers: Fixup the Kconfig consolidation fallout
  x86: Use generic time config
  unicore32: Use generic time config
  um: Use generic time config
  tile: Use generic time config
  sparc: Use: generic time config
  sh: Use generic time config
  score: Use generic time config
  s390: Use generic time config
  openrisc: Use generic time config
  powerpc: Use generic time config
  mn10300: Use generic time config
  mips: Use generic time config
  microblaze: Use generic time config
  m68k: Use generic time config
  m32r: Use generic time config
  ...
2012-05-24 13:29:46 -07:00
Al Viro
a42c6ded82 move key_repace_session_keyring() into tracehook_notify_resume()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-23 22:09:20 -04:00
Linus Torvalds
f9369910a6 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal
Pull first series of signal handling cleanups from Al Viro:
 "This is just the first part of the queue (about a half of it);
  assorted fixes all over the place in signal handling.

  This one ends with all sigsuspend() implementations switched to
  generic one (->saved_sigmask-based).

  With this, a bunch of assorted old buglets are fixed and most of the
  missing bits of NOTIFY_RESUME hookup are in place.  Two more fixes sit
  in arm and um trees respectively, and there's a couple of broken ones
  that need obvious fixes - parisc and avr32 check TIF_NOTIFY_RESUME
  only on one of two codepaths; fixes for that will happen in the next
  series"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: (55 commits)
  unicore32: if there's no handler we need to restore sigmask, syscall or no syscall
  xtensa: add handling of TIF_NOTIFY_RESUME
  microblaze: drop 'oldset' argument of do_notify_resume()
  microblaze: handle TIF_NOTIFY_RESUME
  score: add handling of NOTIFY_RESUME to do_notify_resume()
  m68k: add TIF_NOTIFY_RESUME and handle it.
  sparc: kill ancient comment in sparc_sigaction()
  h8300: missing checks of __get_user()/__put_user() return values
  frv: missing checks of __get_user()/__put_user() return values
  cris: missing checks of __get_user()/__put_user() return values
  powerpc: missing checks of __get_user()/__put_user() return values
  sh: missing checks of __get_user()/__put_user() return values
  sparc: missing checks of __get_user()/__put_user() return values
  avr32: struct old_sigaction is never used
  m32r: struct old_sigaction is never used
  xtensa: xtensa_sigaction doesn't exist
  alpha: tidy signal delivery up
  score: don't open-code force_sigsegv()
  cris: don't open-code force_sigsegv()
  blackfin: don't open-code force_sigsegv()
  ...
2012-05-23 18:11:45 -07:00
Linus Torvalds
2e341ca686 Sound updates for 3.5-rc1
This is the first big chunk for 3.5 merges of sound stuff.
 There are a few big changes in different areas.  First off, the
 streaming logic of USB-audio endpoints has been largely rewritten
 for the better support of "implicit feedback".  If anything about USB
 got broken, this change has to be checked.
 
 For HD-audio, the resume procedure was changed; instead of delaying
 the resume of the hardware until the first use, now waking up immediately
 at resume.  This is for buggy BIOS.
 
 For ASoC, dynamic PCM support and the improved support for digital links
 between off-SoC devices are major framework changes.
 
 Some highlights are below:
 
 * HD-audio
 - Avoid the accesses of invalid pin-control bits that may stall the codec
 - V-ref setup cleanups
 - Fix the races in power-saving code
 - Fix the races in codec cache hashes and connection lists
 - Split some common codes for BIOS auto-parser to hda_auto_parser.c
 - Changed the PM resume code to wake up immediately for buggy BIOS
 - Creative SoundCore3D support
 - Add Conexant CX20751/2/3/4 codec support
 
 * ASoC
 - Dynamic PCM support, allowing support for SoCs with internal routing
   through components with tight sequencing and formatting constraints
   within their internal paths or where there are multiple components
   connected with CPU managed DMA controllers inside the SoC.
 - Greatly improved support for direct digital links between off-SoC
   devices, providing a much simpler way of connecting things like digital
   basebands to CODECs.
 - Much more fine grained and robust locking, cleaning up some of the
   confusion that crept in with multi-component.
 - CPU support for nVidia Tegra 30 I2S and audio hub controllers and
   ST-Ericsson MSP I2S controolers
 - New CODEC drivers for Cirrus CS42L52, LAPIS Semiconductor ML26124, Texas
   Instruments LM49453.
 - Some regmap changes needed by the Tegra I2S driver.
 - mc13783 audio support.
 
 * Misc
 - Rewrite with module_pci_driver()
 - Xonar DGX support for snd-oxygen
 - Improvement of packet handling in snd-firewire driver
 - New USB-endpoint streaming logic
 - Enhanced M-audio FTU quirks and relevant cleanups
 - Increment the support of OSS devices to 256
 - snd-aloop accuracy improvement
 
 There are a few more pending changes for 3.5, but they will be
 sent slightly later as partly depending on the changes of DRM.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQIcBAABAgAGBQJPvD/9AAoJEGwxgFQ9KSmkPsIP/AuBGpAZy7b7FiEEIy1Hhdws
 US8WVuPzyDslMVdzZ8OFqyPXanIcL9gscoOGMZOEy7UFtMBiR4GuYiPRPubEMxuP
 /gopUqK4SqIsIwT238qqYszSJSxE7gNEZ/2jhSGtkX4EkaSZ4bAskn0iOKX5uw2f
 kTUQknA1rNLIGba2z6rJbgIW7hdxGfpFy05ruv3ct81nO+5JlgyLuP/v5R6jL+do
 cum0N4dJFRd9YSEi2BG612gdz8LJyzOgPqBKmxMEva6BfqLkR8EdP80FtE3eEOiP
 Et1q2LhZwOlBt0BEjsjjOVxMsgxVax6ps9cuNRTk5ECEOldU5dbDatC45L/e9mSD
 OQVUjYAX1mQAtYva4U4PPn6WU6ma2L5yjy4peCObtyCMkEchXk1bfs4CEfVqCXUP
 yFYN8C+y6osZOyWE3+Enn9ifZdWyLeSVq6CT33Yt+fyKlswp6gRkhKYiEPqTA5aU
 p71X59Pp7q1y3tQwiMJNpf2QdkxuxfKURHswdc4BS9ct0mdZhQX0GyDS7OffkTd4
 Lq5UkVMHA1rLlF9oRPd2C9P4BuMEuvLjf662YCKiw+mWFYdBC036DHLLjm1Hcwuj
 UkpQ2PSrrdHG1u0c3ooZ9dQj1BNX4LoABLqvaMtce6sESD/hJ5gcprYJWvtituwM
 ZzZiJavIWsoJ+SWQWBHe
 =+JSm
 -----END PGP SIGNATURE-----

Merge tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "This is the first big chunk for 3.5 merges of sound stuff.

  There are a few big changes in different areas.  First off, the
  streaming logic of USB-audio endpoints has been largely rewritten for
  the better support of "implicit feedback".  If anything about USB got
  broken, this change has to be checked.

  For HD-audio, the resume procedure was changed; instead of delaying
  the resume of the hardware until the first use, now waking up
  immediately at resume.  This is for buggy BIOS.

  For ASoC, dynamic PCM support and the improved support for digital
  links between off-SoC devices are major framework changes.

  Some highlights are below:

  * HD-audio
   - Avoid accesses of invalid pin-control bits that may stall the codec
   - V-ref setup cleanups
   - Fix the races in power-saving code
   - Fix the races in codec cache hashes and connection lists
   - Split some common codes for BIOS auto-parser to hda_auto_parser.c
   - Changed the PM resume code to wake up immediately for buggy BIOS
   - Creative SoundCore3D support
   - Add Conexant CX20751/2/3/4 codec support

  * ASoC
   - Dynamic PCM support, allowing support for SoCs with internal
     routing through components with tight sequencing and formatting
     constraints within their internal paths or where there are multiple
     components connected with CPU managed DMA controllers inside the
     SoC.
   - Greatly improved support for direct digital links between off-SoC
     devices, providing a much simpler way of connecting things like
     digital basebands to CODECs.
   - Much more fine grained and robust locking, cleaning up some of the
     confusion that crept in with multi-component.
   - CPU support for nVidia Tegra 30 I2S and audio hub controllers and
     ST-Ericsson MSP I2S controolers
   - New CODEC drivers for Cirrus CS42L52, LAPIS Semiconductor ML26124,
     Texas Instruments LM49453.
   - Some regmap changes needed by the Tegra I2S driver.
   - mc13783 audio support.

  * Misc
   - Rewrite with module_pci_driver()
   - Xonar DGX support for snd-oxygen
   - Improvement of packet handling in snd-firewire driver
   - New USB-endpoint streaming logic
   - Enhanced M-audio FTU quirks and relevant cleanups
   - Increment the support of OSS devices to 256
   - snd-aloop accuracy improvement

  There are a few more pending changes for 3.5, but they will be sent
  slightly later as partly depending on the changes of DRM."

Fix up conflicts in regmap (due to duplicate patches, with some further
updates then having already come in from the regmap tree).  Also some
fairly trivial context conflicts in the imx and mcx soc drivers.

* tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (280 commits)
  ALSA: snd-usb: fix stream info output in /proc
  ALSA: pcm - Add proper state checks to snd_pcm_drain()
  ALSA: sh: Fix up namespace collision in sh_dac_audio.
  ALSA: hda/realtek - Fix unused variable compile warning
  ASoC: sh: fsi: enable chip specific data transfer mode
  ASoC: sh: fsi: call fsi_hw_startup/shutdown from fsi_dai_trigger()
  ASoC: sh: fsi: use same format for IN/OUT
  ASoC: sh: fsi: add fsi_version() and removed meaningless version check
  ASoC: sh: fsi: use register field macro name on IN/OUT_DMAC
  ASoC: tegra: Add machine driver for WM8753 codec
  ALSA: hda - Fix possible races of accesses to connection list array
  ASoC: OMAP: HDMI: Introduce codec
  ARM: mx31_3ds: Add sound support
  ASoC: imx-mc13783 cleanup
  mx31moboard: Add sound support
  ASoC: mc13783 codec cleanups
  ASoC: add imx-mc13783 sound support
  ASoC: Add mc13783 codec
  mfd: mc13xxx: add codec platform data
  ASoC: don't flip master of DT-instantiated DAI links
  ...
2012-05-23 13:05:43 -07:00
Linus Torvalds
ec0d7f18ab Merge branch 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull fpu state cleanups from Ingo Molnar:
 "This tree streamlines further aspects of FPU handling by eliminating
  the prepare_to_copy() complication and moving that logic to
  arch_dup_task_struct().

  It also fixes the FPU dumps in threaded core dumps, removes and old
  (and now invalid) assumption plus micro-optimizes the exit path by
  avoiding an FPU save for dead tasks."

Fixed up trivial add-add conflict in arch/sh/kernel/process.c that came
in because we now do the FPU handling in arch_dup_task_struct() rather
than the legacy (and now gone) prepare_to_copy().

* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, fpu: drop the fpu state during thread exit
  x86, xsave: remove thread_has_fpu() bug check in __sanitize_i387_state()
  coredump: ensure the fpu state is flushed for proper multi-threaded core dump
  fork: move the real prepare_to_copy() users to arch_dup_task_struct()
2012-05-23 10:59:07 -07:00
Linus Torvalds
1d767cae4d SuperH updates for 3.5-rc1 merge window
- New CPUs: SH7734 (SH-4A), SH7264 and SH7269 (SH-2A)
 - New boards: RSK2+SH7264, RSK2+SH7269
 - Unbreaking kgdb for SMP
 - Consolidation of _32/_64 page fault handling.
 - watchdog and legacy DMA chainsawing, part 1
 - Conversion to evt2irq() hwirq lookup, to support relocation
   of vectored IRQs for irqdomains.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iEYEABECAAYFAk+7gb4ACgkQGkmNcg7/o7hoPQCgvdQGi9dk3ewIBX9LQ9mL6L81
 ls8An3PMKi9fHANnztVUAheP1U2DEanJ
 =v/VS
 -----END PGP SIGNATURE-----

Merge tag 'sh-for-linus' of git://github.com/pmundt/linux-sh

Pull SuperH updates from Paul Mundt:
 - New CPUs: SH7734 (SH-4A), SH7264 and SH7269 (SH-2A)
 - New boards: RSK2+SH7264, RSK2+SH7269
 - Unbreaking kgdb for SMP
 - Consolidation of _32/_64 page fault handling.
 - watchdog and legacy DMA chainsawing, part 1
 - Conversion to evt2irq() hwirq lookup, to support relocation of
   vectored IRQs for irqdomains.

* tag 'sh-for-linus' of git://github.com/pmundt/linux-sh: (98 commits)
  sh: intc: Kill off special reservation interface.
  sh: Enable PIO API for hp6xx and se770x.
  sh: Kill off machvec IRQ hinting.
  sh: dma: More legacy cpu dma chainsawing.
  sh: Kill off MAX_DMA_ADDRESS leftovers.
  sh: Tidy up some of the cpu legacy dma header mess.
  sh: Move sh4a dma header from cpu-sh4 to cpu-sh4a.
  sh64: Fix up vmalloc fault range check.
  Revert "sh: Ensure fixmap and store queue space can co-exist."
  serial: sh-sci: Fix for port types without BRI interrupts.
  sh: legacy PCI evt2irq migration.
  sh: cpu dma evt2irq migration.
  sh: sh7763rdp evt2irq migration.
  sh: sdk7780 evt2irq migration.
  sh: migor evt2irq migration.
  sh: landisk evt2irq migration.
  sh: kfr2r09 evt2irq migration.
  sh: ecovec24 evt2irq migration.
  sh: ap325rxa evt2irq migration.
  sh: urquell evt2irq migration.
  ...
2012-05-23 09:00:40 -07:00
Linus Torvalds
e8650a0823 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial updates from Jiri Kosina:
 "As usual, it's mostly typo fixes, redundant code elimination and some
  documentation updates."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (57 commits)
  edac, mips: don't change code that has been removed in edac/mips tree
  xtensa: Change mail addresses of Hannes Weiner and Oskar Schirmer
  lib: Change mail address of Oskar Schirmer
  net: Change mail address of Oskar Schirmer
  arm/m68k: Change mail address of Sebastian Hess
  i2c: Change mail address of Oskar Schirmer
  net: Fix tcp_build_and_update_options comment in struct tcp_sock
  atomic64_32.h: fix parameter naming mismatch
  Kconfig: replace "--- help ---" with "---help---"
  c2port: fix bogus Kconfig "default no"
  edac: Fix spelling errors.
  qla1280: Remove redundant NULL check before release_firmware() call
  remoteproc: remove redundant NULL check before release_firmware()
  qla2xxx: Remove redundant NULL check before release_firmware() call.
  aic94xx: Get rid of redundant NULL check before release_firmware() call
  tehuti: delete redundant NULL check before release_firmware()
  qlogic: get rid of a redundant test for NULL before call to release_firmware()
  bna: remove redundant NULL test before release_firmware()
  tg3: remove redundant NULL test before release_firmware() call
  typhoon: get rid of redundant conditional before all to release_firmware()
  ...
2012-05-22 19:22:50 -07:00
Linus Torvalds
d79ee93de9 Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler changes from Ingo Molnar:
 "The biggest change is the cleanup/simplification of the load-balancer:
  instead of the current practice of architectures twiddling scheduler
  internal data structures and providing the scheduler domains in
  colorfully inconsistent ways, we now have generic scheduler code in
  kernel/sched/core.c:sched_init_numa() that looks at the architecture's
  node_distance() parameters and (while not fully trusting it) deducts a
  NUMA topology from it.

  This inevitably changes balancing behavior - hopefully for the better.

  There are various smaller optimizations, cleanups and fixlets as well"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Taint kernel with TAINT_WARN after sleep-in-atomic bug
  sched: Remove stale power aware scheduling remnants and dysfunctional knobs
  sched/debug: Fix printing large integers on 32-bit platforms
  sched/fair: Improve the ->group_imb logic
  sched/nohz: Fix rq->cpu_load[] calculations
  sched/numa: Don't scale the imbalance
  sched/fair: Revert sched-domain iteration breakage
  sched/x86: Rewrite set_cpu_sibling_map()
  sched/numa: Fix the new NUMA topology bits
  sched/numa: Rewrite the CONFIG_NUMA sched domain support
  sched/fair: Propagate 'struct lb_env' usage into find_busiest_group
  sched/fair: Add some serialization to the sched_domain load-balance walk
  sched/fair: Let minimally loaded cpu balance the group
  sched: Change rq->nr_running to unsigned int
  x86/numa: Check for nonsensical topologies on real hw as well
  x86/numa: Hard partition cpu topology masks on node boundaries
  x86/numa: Allow specifying node_distance() for numa=fake
  x86/sched: Make mwait_usable() heed to "idle=" kernel parameters properly
  sched: Update documentation and comments
  sched_rt: Avoid unnecessary dequeue and enqueue of pushable tasks in set_cpus_allowed_rt()
2012-05-22 18:27:32 -07:00
Linus Torvalds
2ff2b289a6 Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf changes from Ingo Molnar:
 "Lots of changes:

   - (much) improved assembly annotation support in perf report, with
     jump visualization, searching, navigation, visual output
     improvements and more.

    - kernel support for AMD IBS PMU hardware features.  Notably 'perf
      record -e cycles:p' and 'perf top -e cycles:p' should work without
      skid now, like PEBS does on the Intel side, because it takes
      advantage of IBS transparently.

    - the libtracevents library: it is the first step towards unifying
      tracing tooling and perf, and it also gives a tracing library for
      external tools like powertop to rely on.

    - infrastructure: various improvements and refactoring of the UI
      modules and related code

    - infrastructure: cleanup and simplification of the profiling
      targets code (--uid, --pid, --tid, --cpu, --all-cpus, etc.)

    - tons of robustness fixes all around

    - various ftrace updates: speedups, cleanups, robustness
      improvements.

    - typing 'make' in tools/ will now give you a menu of projects to
      build and a short help text to explain what each does.

    - ... and lots of other changes I forgot to list.

  The perf record make bzImage + perf report regression you reported
  should be fixed."

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (166 commits)
  tracing: Remove kernel_lock annotations
  tracing: Fix initial buffer_size_kb state
  ring-buffer: Merge separate resize loops
  perf evsel: Create events initially disabled -- again
  perf tools: Split term type into value type and term type
  perf hists: Fix callchain ip printf format
  perf target: Add uses_mmap field
  ftrace: Remove selecting FRAME_POINTER with FUNCTION_TRACER
  ftrace/x86: Have x86 ftrace use the ftrace_modify_all_code()
  ftrace: Make ftrace_modify_all_code() global for archs to use
  ftrace: Return record ip addr for ftrace_location()
  ftrace: Consolidate ftrace_location() and ftrace_text_reserved()
  ftrace: Speed up search by skipping pages by address
  ftrace: Remove extra helper functions
  ftrace: Sort all function addresses, not just per page
  tracing: change CPU ring buffer state from tracing_cpumask
  tracing: Check return value of tracing_dentry_percpu()
  ring-buffer: Reset head page before running self test
  ring-buffer: Add integrity check at end of iter read
  ring-buffer: Make addition of pages in ring buffer atomic
  ...
2012-05-22 18:18:55 -07:00
Paul Mundt
5f19f14fed sh: intc: Kill off special reservation interface.
At present reserving the IRLs in the IRQ bitmap in addition to the
dropping of the legacy IRQ pre-allocation prevent IRL IRQs from being
allocated for the x3proto board.

The only reason to permit reservations was to lock down possible hardware
vectors prior to dynamic IRQ scanning, but this doesn't matter much given
that the hardware controller configuration is sorted before we get around
to doing any dynamic IRQ allocation anyways. Beyond that, all of the
tables are __init annotated, so quite a bit more work would need to be
done to support reconfiguring things like IRL controllers on the fly,
much more than would ever make it worth the hassle.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-22 19:07:55 +09:00
Al Viro
a46808e1b7 sh: missing checks of __get_user()/__put_user() return values
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-21 23:59:21 -04:00
Al Viro
9ef461adf9 sh: switch to saved_sigmask-based sigsuspend()/rt_sigsuspend()
Complete the move of sh64 to it, trim the crap from prototypes,
tidy up a bit.  Infrastructure in do_signal() had already been
there, in signal_64 as well as in signal_32 (where it was already
used).

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-21 23:58:06 -04:00
Al Viro
68f3f16d9a new helper: sigsuspend()
guts of saved_sigmask-based sigsuspend/rt_sigsuspend.  Takes
kernel sigset_t *.

Open-coded instances replaced with calling it.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-21 23:52:30 -04:00
Linus Torvalds
cb60e3e65c Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security subsystem updates from James Morris:
 "New notable features:
   - The seccomp work from Will Drewry
   - PR_{GET,SET}_NO_NEW_PRIVS from Andy Lutomirski
   - Longer security labels for Smack from Casey Schaufler
   - Additional ptrace restriction modes for Yama by Kees Cook"

Fix up trivial context conflicts in arch/x86/Kconfig and include/linux/filter.h

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (65 commits)
  apparmor: fix long path failure due to disconnected path
  apparmor: fix profile lookup for unconfined
  ima: fix filename hint to reflect script interpreter name
  KEYS: Don't check for NULL key pointer in key_validate()
  Smack: allow for significantly longer Smack labels v4
  gfp flags for security_inode_alloc()?
  Smack: recursive tramsmute
  Yama: replace capable() with ns_capable()
  TOMOYO: Accept manager programs which do not start with / .
  KEYS: Add invalidation support
  KEYS: Do LRU discard in full keyrings
  KEYS: Permit in-place link replacement in keyring list
  KEYS: Perform RCU synchronisation on keys prior to key destruction
  KEYS: Announce key type (un)registration
  KEYS: Reorganise keys Makefile
  KEYS: Move the key config into security/keys/Kconfig
  KEYS: Use the compat keyctl() syscall wrapper on Sparc64 for Sparc32 compat
  Yama: remove an unused variable
  samples/seccomp: fix dependencies on arch macros
  Yama: add additional ptrace scopes
  ...
2012-05-21 20:27:36 -07:00
Thomas Gleixner
764e0da14f timers: Fixup the Kconfig consolidation fallout
Sigh, I missed to check which architecture Kconfig files actually
include the core Kconfig file. There are a few which did not. So we
broke them.

Instead of adding the includes to those, we are better off to move the
include to init/Kconfig like we did already with irqs and others.

This does not change anything for the architectures using the old
style periodic timer mode. It just solves the build wreckage there.

For those architectures which use the clock events infrastructure it
moves the include of the core Kconfig file to "General setup" which is
a way more logical place than having it at random locations specified
by the architecture specific Kconfigs.

Reported-by: Ingo Molnar <mingo@kernel.org>
Cc: Anna-Maria Gleixner <anna-maria@glx-um.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-05-21 23:43:46 +02:00
Paul Mundt
c30b9c432e sh: Enable PIO API for hp6xx and se770x.
Both of these boards are still using the PIO API sans PCI, and will need
to be carefully converted. As conversion is out of scope for this merge
window, simply make sure NO_IOPORT doesn't get accidentally set for
these, joining a long list of other crap platforms.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-21 18:19:18 +09:00
Anna-Maria Gleixner
8cf200d8d0 sh: Use generic time config
Signed-off-by: Anna-Maria Gleixner <anna-maria@glx-um.de>
Cc: Paul Mundt <lethal@linux-sh.org>
Link: http://lkml.kernel.org/r/20120518163106.857566635@glx-um.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-05-21 11:01:44 +02:00
Paul Mundt
63dc02bde6 sh: Kill off machvec IRQ hinting.
Everything is using sparseirq these days, so we have no need to
arbitrarily size nr_irqs ahead of time. The legacy IRQ pre-allocation
likewise has no meaning for us, so that's killed off too. We now depend
on nr_irqs expansion by the generic hardirq layer instead.

It's also worth noting that the majority of boards had completely bogus
values for their nr_irqs relative to their CPU and configurations, so
this ends up correcting behaviour for quite a few platforms.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-21 17:54:01 +09:00
Paul Mundt
7f47c7189b sh: dma: More legacy cpu dma chainsawing.
Attempt to "tidy" up some of the multi IRQ handling and base + IRQ
management. This should keep it limping along without too much hassle,
and no new parts should ever be enabling or using this API anyways.

It doesn't get any closer to lipstick on a pig as this.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-19 20:38:50 +09:00
Paul Mundt
e24cca19ba sh: Kill off MAX_DMA_ADDRESS leftovers.
We don't support the ISA DMA API, so this is only ever misused. The
dma-sh case inadvertently broke the dreamcast case by testing the wrong
variable for the total number of channels, so this fixes that up too.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-19 18:50:09 +09:00
Paul Mundt
2ff9f317f1 sh: Tidy up some of the cpu legacy dma header mess.
This has turned in to quite a mess, and with CPUs that care using
dmaengine now it's about time to start cleaning up after the legacy DMA
code. For starters, kill off the stubs for the CPUs that don't do
anything, as well as all of the unused definitions. This leaves us with a
set of IRQs and base addresses we can deal with later.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-19 18:30:31 +09:00
Paul Mundt
0c6012313c sh: Move sh4a dma header from cpu-sh4 to cpu-sh4a.
cpu-sh4a headers take priority over cpu-sh4 ones by virtue of the build
system, there's no need to try and mingle sh4a stuff in cpu-sh4.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-19 18:06:12 +09:00
Arnaldo Carvalho de Melo
16ee6576e2 Merge remote-tracking branch 'tip/perf/urgent' into perf/core
Merge reason: We are going to queue up a dependent patch:

"perf tools: Move parse event automated tests to separated object"

That depends on:

commit e7c72d8
perf tools: Add 'G' and 'H' modifiers to event parsing

Conflicts:
	tools/perf/builtin-stat.c

Conflicted with the recent 'perf_target' patches when checking the
result of perf_evsel open routines to see if a retry is needed to cope
with older kernels where the exclude guest/host perf_event_attr bits
were not used.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-18 13:13:33 -03:00
Paul Mundt
d8fd35fc58 sh64: Fix up vmalloc fault range check.
With the previous attempt reverted this switches to conditionalizing the
end address. Nominally VMALLOC_END, but extended for P3_ADDR_MAX in the
store queue case.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-18 20:01:16 +09:00
Paul Mundt
c3e0af9879 Revert "sh: Ensure fixmap and store queue space can co-exist."
This reverts commit 20e7c297ef.
With store queues enabled the area above P4SEG has special properties
from the MMU's point of view, which was causing fixmap failure. We'll
have to do something else to satisfy the vmalloc range check.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-18 19:30:05 +09:00
Paul Mundt
c1dbccc3c7 Merge branch 'sh/evt2irq-migration' into sh-latest
Conflicts:
	arch/sh/kernel/cpu/sh3/setup-sh770x.c
	arch/sh/kernel/cpu/sh3/setup-sh7710.c
	arch/sh/kernel/cpu/sh3/setup-sh7720.c
	arch/sh/kernel/cpu/sh4/setup-sh7750.c
	arch/sh/kernel/cpu/sh4a/setup-sh7343.c
	arch/sh/kernel/cpu/sh4a/setup-sh7366.c
	arch/sh/kernel/cpu/sh4a/setup-sh7722.c
	arch/sh/kernel/cpu/sh4a/setup-sh7723.c
	arch/sh/kernel/cpu/sh4a/setup-sh7724.c
	arch/sh/kernel/cpu/sh4a/setup-sh7757.c
	arch/sh/kernel/cpu/sh4a/setup-sh7763.c
	arch/sh/kernel/cpu/sh4a/setup-sh7770.c
	arch/sh/kernel/cpu/sh4a/setup-sh7785.c
	arch/sh/kernel/cpu/sh4a/setup-sh7786.c

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-18 18:13:27 +09:00
Paul Mundt
58796ce67a sh: legacy PCI evt2irq migration.
This converts over the legacy PCI IRQs to evt2irq() backed hwirq lookups.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-18 17:42:29 +09:00
Paul Mundt
9f38045643 sh: cpu dma evt2irq migration.
This migrates the cpu-family relative DMA IRQ definitions over to
evt2irq() backed hwirq lookups.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-18 17:27:28 +09:00
Paul Mundt
6b1ef625c3 sh: sh7763rdp evt2irq migration.
Migrate sh7763rdp to evt2irq backed hwirq lookups.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-18 17:14:34 +09:00
Paul Mundt
d66bd5f147 sh: sdk7780 evt2irq migration.
Migrate sdk7780 to evt2irq backed hwirq lookups.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-18 17:13:52 +09:00
Paul Mundt
26819fcbea sh: migor evt2irq migration.
Migrate migor to evt2irq backed hwirq lookups.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-18 17:07:09 +09:00
Paul Mundt
ce932d0c55 sh: landisk evt2irq migration.
Migrate landisk to evt2irq backed hwirq lookups.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-18 16:51:36 +09:00
Paul Mundt
aa82f9fcd0 sh: kfr2r09 evt2irq migration.
Migrate kfr2r09 to evt2irq backed hwirq lookups.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-18 15:53:29 +09:00
Paul Mundt
9307d11584 sh: ecovec24 evt2irq migration.
Migrate ecovec24 to evt2irq backed hwirq lookups.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-18 15:49:38 +09:00