7bc5f447ce (ima: define new function ima_alloc_init_template() to
API) moved the initialization of 'entry' in ima_add_boot_aggregate() a
bit more below, after the if (ima_used_chip).
So, 'entry' is not initialized while being inside this if-block. So, we
should not attempt to free it.
Found by Coverity (CID: 1131971)
Fixes: 7bc5f447ce (ima: define new function ima_alloc_init_template() to API)
Signed-off-by: Christoph Paasch <christoph.paasch@uclouvain.be>
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
This patch stores the address of the 'template_fmt_copy' variable in a new
variable, called 'template_fmt_ptr', so that the latter is passed as an
argument of strsep() instead of the former. This modification is needed
in order to correctly free the memory area referenced by
'template_fmt_copy' (strsep() modifies the pointer of the passed string).
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Reported-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
This patch defines a new value for the 'ima_show_type' enumerator
(IMA_SHOW_BINARY_NO_FIELD_LEN) to prevent that the field length
is transmitted through the 'binary_runtime_measurements' interface
for the digest field of the 'ima' template.
Fixes commit: 3ce1217 ima: define template fields library and new helpers
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
To maintain compatibility with userspace tools, the field length must not
be included in the template digest calculation for the 'ima' template.
Fixes commit: a71dc65 ima: switch to new template management mechanism
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
This reverts commit 217091dd7a, which
caused the following build error:
security/integrity/digsig.c:70:5: error: redefinition of ‘integrity_init_keyring’
security/integrity/integrity.h:149:12: note: previous definition of ‘integrity_init_keyring’ w
security/integrity/integrity.h:149:12: warning: ‘integrity_init_keyring’ defined but not used
reported by Krzysztof Kolasa. Mimi says:
"I made the classic mistake of requesting this patch to be upstreamed
at the last second, rather than waiting until the next open window.
At this point, the best course would probably be to revert the two
commits and fix them for the next open window"
Reported-by: Krzysztof Kolasa <kkolasa@winsoft.pl>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Require all keys added to the IMA keyring be signed by an
existing trusted key on the system trusted keyring.
Changelog:
- define stub integrity_init_keyring() function (reported-by Fengguang Wu)
- differentiate between regular and trusted keyring names.
- replace printk with pr_info (D. Kasatkin)
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
This patch defines a new template called 'ima-sig', which includes
the file signature in the template data, in addition to the file's
digest and pathname.
A template is composed of a set of fields. Associated with each
field is an initialization and display function. This patch defines
a new template field called 'sig', the initialization function
ima_eventsig_init(), and the display function ima_show_template_sig().
This patch modifies the .field_init() function definition to include
the 'security.ima' extended attribute and length.
Changelog:
- remove unused code (Dmitry Kasatkin)
- avoid calling ima_write_template_field_data() unnecesarily (Roberto Sassu)
- rename DATA_FMT_SIG to DATA_FMT_HEX
- cleanup ima_eventsig_init() based on Roberto's comments
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
All files labeled with 'security.ima' hashes, are hashed using the
same hash algorithm. Changing from one hash algorithm to another,
requires relabeling the filesystem. This patch defines a new xattr
type, which includes the hash algorithm, permitting different files
to be hashed with different algorithms.
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
The IMA measurement list contains two hashes - a template data hash
and a filedata hash. The template data hash is committed to the TPM,
which is limited, by the TPM v1.2 specification, to 20 bytes. The
filedata hash is defined as 20 bytes as well.
Now that support for variable length measurement list templates was
added, the filedata hash is not limited to 20 bytes. This patch adds
Kconfig support for defining larger default filedata hash algorithms
and replacing the builtin default with one specified on the kernel
command line.
<uapi/linux/hash_info.h> contains a list of hash algorithms. The
Kconfig default hash algorithm is a subset of this list, but any hash
algorithm included in the list can be specified at boot, using the
'ima_hash=' kernel command line option.
Changelog v2:
- update Kconfig
Changelog:
- support hashes that are configured
- use generic HASH_ALGO_ definitions
- add Kconfig support
- hash_setup must be called only once (Dmitry)
- removed trailing whitespaces (Roberto Sassu)
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
This patch allows users to specify from the kernel command line the
template descriptor, among those defined, that will be used to generate
and display measurement entries. If an user specifies a wrong template,
IMA reverts to the template descriptor set in the kernel configuration.
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
This patch adds a Kconfig option to select the default IMA
measurement list template. The 'ima' template limited the
filedata hash to 20 bytes and the pathname to 255 charaters.
The 'ima-ng' measurement list template permits larger hash
digests and longer pathnames.
Changelog:
- keep 'select CRYPTO_HASH_INFO' in 'config IMA' section (Kconfig)
(Roberto Sassu);
- removed trailing whitespaces (Roberto Sassu).
- Lindent fixes
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
The same hash algorithm should be used for calculating the file
data hash for the IMA measurement list, as for appraising the file
data integrity. (The appraise hash algorithm is stored in the
'security.ima' extended attribute.) The exception is when the
reference file data hash digest, stored in the extended attribute,
is larger than the one supported by the template. In this case,
the file data hash needs to be calculated twice, once for the
measurement list and, again, for appraisal.
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Different files might be signed based on different hash algorithms.
This patch prefixes the audit log measurement hash with the hash
algorithm.
Changelog:
- use generic HASH_ALGO defintions
- use ':' as delimiter between the hash algorithm and the digest
(Roberto Sassu)
- always include the hash algorithm used when audit-logging a measurement
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Peter Moody <pmoody@google.com>
This patch performs the switch to the new template mechanism by modifying
the functions ima_alloc_init_template(), ima_measurements_show() and
ima_ascii_measurements_show(). The old function ima_template_show() was
removed as it is no longer needed. Also, if the template descriptor used
to generate a measurement entry is not 'ima', the whole length of field
data stored for an entry is provided before the data itself through the
binary_runtime_measurement interface.
Changelog:
- unnecessary to use strncmp() (Mimi Zohar)
- create new variable 'field' in ima_alloc_init_template() (Roberto Sassu)
- use GFP_NOFS flag in ima_alloc_init_template() (Roberto Sassu)
- new variable 'num_fields' in ima_store_template() (Roberto Sassu,
proposed by Mimi Zohar)
- rename ima_calc_buffer_hash/template_hash() to ima_calc_field_array_hash(),
something more generic (Mimi, requested by Dmitry)
- sparse error fix - Fengguang Wu
- fix lindent warnings
- always include the field length in the template data length
- include the template field length variable size in the template data length
- include both the template field data and field length in the template digest
calculation. Simplifies verifying the template digest. (Mimi)
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
This patch adds support for the new template 'ima-ng', whose format
is defined as 'd-ng|n-ng'. These new field definitions remove the
size limitations of the original 'ima' template. Further, the 'd-ng'
field prefixes the inode digest with the hash algorithim, when
displaying the new larger digest sizes.
Change log:
- scripts/Lindent fixes - Mimi
- "always true comparison" - reported by Fengguang Wu, resolved Dmitry
- initialize hash_algo variable to HASH_ALGO__LAST
- always prefix digest with hash algorithm - Mimi
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
This patch defines a library containing two initial template fields,
inode digest (d) and file name (n), the 'ima' template descriptor,
whose format is 'd|n', and two helper functions,
ima_write_template_field_data() and ima_show_template_field_data().
Changelog:
- replace ima_eventname_init() parameter NULL checking with BUG_ON.
(suggested by Mimi)
- include "new template fields for inode digest (d) and file name (n)"
definitions to fix a compiler warning. - Mimi
- unnecessary to prefix static function names with 'ima_'. remove
prefix to resolve Lindent formatting changes. - Mimi
- abbreviated/removed inline comments - Mimi
- always send the template field length - Mimi
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
The original 'ima' template is fixed length, containing the filedata hash
and pathname. The filedata hash is limited to 20 bytes (md5/sha1). The
pathname is a null terminated string, limited to 255 characters. To
overcome these limitations and to add additional file metadata, it is
necessary to extend the current version of IMA by defining additional
templates.
The main reason to introduce this feature is that, each time a new
template is defined, the functions that generate and display the
measurement list would include the code for handling a new format and,
thus, would significantly grow over time.
This patch set solves this problem by separating the template management
from the remaining IMA code. The core of this solution is the definition
of two new data structures: a template descriptor, to determine which
information should be included in the measurement list, and a template
field, to generate and display data of a given type.
To define a new template field, developers define the field identifier
and implement two functions, init() and show(), respectively to generate
and display measurement entries. Initially, this patch set defines the
following template fields (support for additional data types will be
added later):
- 'd': the digest of the event (i.e. the digest of a measured file),
calculated with the SHA1 or MD5 hash algorithm;
- 'n': the name of the event (i.e. the file name), with size up to
255 bytes;
- 'd-ng': the digest of the event, calculated with an arbitrary hash
algorithm (field format: [<hash algo>:]digest, where the digest
prefix is shown only if the hash algorithm is not SHA1 or MD5);
- 'n-ng': the name of the event, without size limitations.
Defining a new template descriptor requires specifying the template format,
a string of field identifiers separated by the '|' character. This patch
set defines the following template descriptors:
- "ima": its format is 'd|n';
- "ima-ng" (default): its format is 'd-ng|n-ng'
Further details about the new template architecture can be found in
Documentation/security/IMA-templates.txt.
Changelog:
- don't defer calling ima_init_template() - Mimi
- don't define ima_lookup_template_desc() until used - Mimi
- squashed with documentation patch - Mimi
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Instead of allocating and initializing the template entry from multiple
places (eg. boot aggregate, violation, and regular measurements), this
patch defines a new function called ima_alloc_init_template(). The new
function allocates and initializes the measurement entry with the inode
digest and the filename.
In respect to the current behavior, it truncates the file name passed
in the 'filename' argument if the latter's size is greater than 255 bytes
and the passed file descriptor is NULL.
Changelog:
- initialize 'hash' variable for non TPM case - Mimi
- conform to expectation for 'iint' to be defined as a pointer. - Mimi
- add missing 'file' dependency for recalculating file hash. - Mimi
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Pass the filename argument to ima_add_template_entry() in order to
eliminate a dependency on template specific data (third argument of
integrity_audit_msg).
This change is required because, with the new template management
mechanism, the generation of a new measurement entry will be performed
by new specific functions (introduced in next patches) and the current IMA
code will not be aware anymore of how data is stored in the entry payload.
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Pass the file descriptor instead of the inode to ima_add_violation(),
to make the latter consistent with ima_store_measurement() in
preparation for the new template architecture.
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
With multiple hash algorithms, ima_hash_tfm is no longer guaranteed to be sha1.
Need to force to use sha1.
Changelog:
- pass ima_digest_data to ima_calc_boot_aggregate() instead of char *
(Roberto Sassu);
- create an ima_digest_data structure in ima_add_boot_aggregate()
(Roberto Sassu);
- pass hash->algo to ima_alloc_tfm() (Roberto Sassu, reported by Dmitry).
- "move hash definition in ima_add_boot_aggregate()" commit hunk to here.
- sparse warning fix - Fengguang Wu
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
ima_calc_buffer_hash will be used with different hash algorithms.
This patch provides support for arbitrary hash algorithms in
ima_calc_buffer_hash.
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
This patch provides dedicated hash algo allocation and
deallocation function which can be used by different clients.
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
The TPM v1.2 limits the template hash size to 20 bytes. This
patch differentiates between the template hash size, as defined
in the ima_template_entry, and the file data hash size, as
defined in the ima_template_data. Subsequent patches add support
for different file data hash algorithms.
Change log:
- hash digest definition in ima_store_template() should be TPM_DIGEST_SIZE
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
For each inode in the IMA policy, an iint is allocated. To support
larger hash digests, the iint digest size changed from 20 bytes to
the maximum supported hash digest size. Instead of allocating the
maximum size, which most likely is not needed, this patch dynamically
allocates the needed hash storage.
Changelog:
- fix krealloc bug
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
For possibility to use xattr type for new signature formats,
pass full xattr to the signature verification function.
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
All files on the filesystem, currently, are hashed using the same hash
algorithm. In preparation for files from different packages being
signed using different hash algorithms, this patch adds support for
reading the signature hash algorithm from the 'security.ima' extended
attribute and calculates the appropriate file data hash based on it.
Changelog:
- fix scripts Lindent and checkpatch msgs - Mimi
- fix md5 support for older version, which occupied 20 bytes in the
xattr, not the expected 16 bytes. Fix the comparison to compare
only the first 16 bytes.
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
In preparation of supporting more hash algorithms with larger hash sizes
needed for signature verification, this patch replaces the 20 byte sized
digest, with a more flexible structure. The new structure includes the
hash algorithm, digest size, and digest.
Changelog:
- recalculate filedata hash for the measurement list, if the signature
hash digest size is greater than 20 bytes.
- use generic HASH_ALGO_
- make ima_calc_file_hash static
- scripts lindent and checkpatch fixes
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
This reverts commit 4c2c392763.
Everything in the initramfs should be measured and appraised,
but until the initramfs has extended attribute support, at
least measured.
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Cc: Stable Kernel <stable@kernel.org>
Pull security subsystem updates from James Morris:
"In this update, Smack learns to love IPv6 and to mount a filesystem
with a transmutable hierarchy (i.e. security labels are inherited
from parent directory upon creation rather than creating process).
The rest of the changes are maintenance"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (37 commits)
tpm/tpm_i2c_infineon: Remove unused header file
tpm: tpm_i2c_infinion: Don't modify i2c_client->driver
evm: audit integrity metadata failures
integrity: move integrity_audit_msg()
evm: calculate HMAC after initializing posix acl on tmpfs
maintainers: add Dmitry Kasatkin
Smack: Fix the bug smackcipso can't set CIPSO correctly
Smack: Fix possible NULL pointer dereference at smk_netlbl_mls()
Smack: Add smkfstransmute mount option
Smack: Improve access check performance
Smack: Local IPv6 port based controls
tpm: fix regression caused by section type conflict of tpm_dev_release() in ppc builds
maintainers: Remove Kent from maintainers
tpm: move TPM_DIGEST_SIZE defintion
tpm_tis: missing platform_driver_unregister() on error in init_tis()
security: clarify cap_inode_getsecctx description
apparmor: no need to delay vfree()
apparmor: fix fully qualified name parsing
apparmor: fix setprocattr arg processing for onexec
apparmor: localize getting the security context to a few macros
...
Replace a bunch of file->dentry->d_inode refs with file_inode().
In __fput(), use file->f_inode instead so as not to be affected by any tricks
that file_inode() might grow.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This patch moves the integrity_audit_msg() function and defintion to
security/integrity/, the parent directory, renames the 'ima_audit'
boot command line option to 'integrity_audit', and fixes the Kconfig
help text to reflect the actual code.
Changelog:
- Fixed ifdef inclusion of integrity_audit_msg() (Fengguang Wu)
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Passing a pointer to the dentry name, as a parameter to
process_measurement(), causes a race condition with rename() and
is unnecessary, as the dentry name is already accessible via the
file parameter.
In the normal case, we use the full pathname as provided by
brpm->filename, bprm->interp, or ima_d_path(). Only on ima_d_path()
failure, do we fallback to using the d_name.name, which points
either to external memory or d_iname.
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
I'm not sure why, but the hlist for each entry iterators were conceived
list_for_each_entry(pos, head, member)
The hlist ones were greedy and wanted an extra parameter:
hlist_for_each_entry(tpos, pos, head, member)
Why did they need an extra pos parameter? I'm not quite sure. Not only
they don't really need it, it also prevents the iterator from looking
exactly like the list iterator, which is unfortunate.
Besides the semantic patch, there was some manual work required:
- Fix up the actual hlist iterators in linux/list.h
- Fix up the declaration of other iterators based on the hlist ones.
- A very small amount of places were using the 'node' parameter, this
was modified to use 'obj->member' instead.
- Coccinelle didn't handle the hlist_for_each_entry_safe iterator
properly, so those had to be fixed up manually.
The semantic patch which is mostly the work of Peter Senna Tschudin is here:
@@
iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host;
type T;
expression a,c,d,e;
identifier b;
statement S;
@@
-T b;
<+... when != b
(
hlist_for_each_entry(a,
- b,
c, d) S
|
hlist_for_each_entry_continue(a,
- b,
c) S
|
hlist_for_each_entry_from(a,
- b,
c) S
|
hlist_for_each_entry_rcu(a,
- b,
c, d) S
|
hlist_for_each_entry_rcu_bh(a,
- b,
c, d) S
|
hlist_for_each_entry_continue_rcu_bh(a,
- b,
c) S
|
for_each_busy_worker(a, c,
- b,
d) S
|
ax25_uid_for_each(a,
- b,
c) S
|
ax25_for_each(a,
- b,
c) S
|
inet_bind_bucket_for_each(a,
- b,
c) S
|
sctp_for_each_hentry(a,
- b,
c) S
|
sk_for_each(a,
- b,
c) S
|
sk_for_each_rcu(a,
- b,
c) S
|
sk_for_each_from
-(a, b)
+(a)
S
+ sk_for_each_from(a) S
|
sk_for_each_safe(a,
- b,
c, d) S
|
sk_for_each_bound(a,
- b,
c) S
|
hlist_for_each_entry_safe(a,
- b,
c, d, e) S
|
hlist_for_each_entry_continue_rcu(a,
- b,
c) S
|
nr_neigh_for_each(a,
- b,
c) S
|
nr_neigh_for_each_safe(a,
- b,
c, d) S
|
nr_node_for_each(a,
- b,
c) S
|
nr_node_for_each_safe(a,
- b,
c, d) S
|
- for_each_gfn_sp(a, c, d, b) S
+ for_each_gfn_sp(a, c, d) S
|
- for_each_gfn_indirect_valid_sp(a, c, d, b) S
+ for_each_gfn_indirect_valid_sp(a, c, d) S
|
for_each_host(a,
- b,
c) S
|
for_each_host_safe(a,
- b,
c, d) S
|
for_each_mesh_entry(a,
- b,
c, d) S
)
...+>
[akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c]
[akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c]
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix warnings]
[akpm@linux-foudnation.org: redo intrusive kvm changes]
Tested-by: Peter Senna Tschudin <peter.senna@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull vfs pile (part one) from Al Viro:
"Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent
locking violations, etc.
The most visible changes here are death of FS_REVAL_DOT (replaced with
"has ->d_weak_revalidate()") and a new helper getting from struct file
to inode. Some bits of preparation to xattr method interface changes.
Misc patches by various people sent this cycle *and* ocfs2 fixes from
several cycles ago that should've been upstream right then.
PS: the next vfs pile will be xattr stuff."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits)
saner proc_get_inode() calling conventions
proc: avoid extra pde_put() in proc_fill_super()
fs: change return values from -EACCES to -EPERM
fs/exec.c: make bprm_mm_init() static
ocfs2/dlm: use GFP_ATOMIC inside a spin_lock
ocfs2: fix possible use-after-free with AIO
ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path
get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero
target: writev() on single-element vector is pointless
export kernel_write(), convert open-coded instances
fs: encode_fh: return FILEID_INVALID if invalid fid_type
kill f_vfsmnt
vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op
nfsd: handle vfs_getattr errors in acl protocol
switch vfs_getattr() to struct path
default SET_PERSONALITY() in linux/elf.h
ceph: prepopulate inodes only when request is aborted
d_hash_and_lookup(): export, switch open-coded instances
9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate()
9p: split dropping the acls from v9fs_set_create_acl()
...
Commit "85865c1 ima: add policy support for file system uuid"
introduced a CONFIG_BLOCK dependency. This patch defines a
wrapper called blk_part_pack_uuid(), which returns -EINVAL,
when CONFIG_BLOCK is not defined.
security/integrity/ima/ima_policy.c:538:4: error: implicit declaration
of function 'part_pack_uuid' [-Werror=implicit-function-declaration]
Changelog v2:
- Reference commit number in patch description
Changelog v1:
- rename ima_part_pack_uuid() to blk_part_pack_uuid()
- resolve scripts/checkpatch.pl warnings
Changelog v0:
- fix UUID scripts/Lindent msgs
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: David Rientjes <rientjes@google.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Commit "750943a ima: remove enforce checking duplication" combined
the 'in IMA policy' and 'enforcing file integrity' checks. For
the non-file, kernel module verification, a specific check for
'enforcing file integrity' was not added. This patch adds the
check.
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Pull security subsystem updates from James Morris:
"This is basically a maintenance update for the TPM driver and EVM/IMA"
Fix up conflicts in lib/digsig.c and security/integrity/ima/ima_main.c
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (45 commits)
tpm/ibmvtpm: build only when IBM pseries is configured
ima: digital signature verification using asymmetric keys
ima: rename hash calculation functions
ima: use new crypto_shash API instead of old crypto_hash
ima: add policy support for file system uuid
evm: add file system uuid to EVM hmac
tpm_tis: check pnp_acpi_device return code
char/tpm/tpm_i2c_stm_st33: drop temporary variable for return value
char/tpm/tpm_i2c_stm_st33: remove dead assignment in tpm_st33_i2c_probe
char/tpm/tpm_i2c_stm_st33: Remove __devexit attribute
char/tpm/tpm_i2c_stm_st33: Don't use memcpy for one byte assignment
tpm_i2c_stm_st33: removed unused variables/code
TPM: Wait for TPM_ACCESS tpmRegValidSts to go high at startup
tpm: Fix cancellation of TPM commands (interrupt mode)
tpm: Fix cancellation of TPM commands (polling mode)
tpm: Store TPM vendor ID
TPM: Work around buggy TPMs that block during continue self test
tpm_i2c_stm_st33: fix oops when i2c client is unavailable
char/tpm: Use struct dev_pm_ops for power management
TPM: STMicroelectronics ST33 I2C BUILD STUFF
...
Rename hash calculation functions to reflect meaning
and change argument order in conventional way.
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Old crypto hash API internally uses shash API.
Using shash API directly is more efficient.
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
The IMA policy permits specifying rules to enable or disable
measurement/appraisal/audit based on the file system magic number.
If, for example, the policy contains an ext4 measurement rule,
the rule is enabled for all ext4 partitions.
Sometimes it might be necessary to enable measurement/appraisal/audit
only for one partition and disable it for another partition of the
same type. With the existing IMA policy syntax, this can not be done.
This patch provides support for IMA policy rules to specify the file
system by its UUID (eg. fsuuid=397449cd-687d-4145-8698-7fed4a3e0363).
For partitions not being appraised, it might be a good idea to mount
file systems with the 'noexec' option to prevent executing non-verified
binaries.
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Different hooks can require different methods for appraising a
file's integrity. As a result, an integrity appraisal status is
cached on a per hook basis.
Only a hook specific rule, requires the inode to be re-appraised.
This patch eliminates unnecessary appraisals.
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
With the new IMA policy 'appraise_type=' option, different hooks
can require different methods for appraising a file's integrity.
For example, the existing 'ima_appraise_tcb' policy defines a
generic rule, requiring all root files to be appraised, without
specfying the appraisal method. A more specific rule could require
all kernel modules, for example, to be signed.
appraise fowner=0 func=MODULE_CHECK appraise_type=imasig
appraise fowner=0
As a result, the integrity appraisal results for the same inode, but
for different hooks, could differ. This patch caches the integrity
appraisal results on a per hook basis.
Changelog v2:
- Rename ima_cache_status() to ima_set_cache_status()
- Rename and move get_appraise_status() to ima_get_cache_status()
Changelog v0:
- include IMA_APPRAISE/APPRAISED_SUBMASK in IMA_DO/DONE_MASK (Dmitry)
- Support independent MODULE_CHECK appraise status.
- fixed IMA_XXXX_APPRAISE/APPRAISED flags
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
The 'security.ima' extended attribute may contain either the file data's
hash or a digital signature. This patch adds support for requiring a
specific extended attribute type. It extends the IMA policy with a new
keyword 'appraise_type=imasig'. (Default is hash.)
Changelog v2:
- Fixed Documentation/ABI/testing/ima_policy option syntax
Changelog v1:
- Differentiate between 'required' vs. 'actual' extended attribute
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
This patch forbids write access to files with digital signatures, as they
are considered immutable.
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Define a new function ima_d_path(), which returns the full pathname.
This function will be used further, for example, by the directory
verification code.
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Hexdump is not really helping. Audit messages prints error messages.
Remove it.
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Based on the IMA appraisal policy, files are appraised. For those
files appraised, the IMA hooks return the integrity appraisal result,
assuming IMA-appraisal is in enforcing mode. This patch combines
both of these criteria (in policy and enforcing file integrity),
removing the checking duplication.
Changelog v1:
- Update hook comments
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
When a file system is mounted read-only, setting the xattr value in
fix mode fails with an error code -EROFS. The xattr should be fixed
after the file system is remounted read-write. This patch verifies
that the set xattr succeeds, before setting the appraise status value
to INTEGRITY_PASS.
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Although the IMA policy does not change, the LSM policy can be
reloaded, leaving the IMA LSM based rules referring to the old,
stale LSM policy. This patch updates the IMA LSM based rules
to reflect the reloaded LSM policy.
Reported-by: Sven Vermeulen <sven.vermeulen@siphos.be>
tested-by: Sven Vermeulen <sven.vermeulen@siphos.be>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: Eric Paris <eparis@parisplace.org>
Cc: Casey Schaufler <casey@schaufler-ca.com>
The new kernel module syscall appraises kernel modules based
on policy. If the IMA policy requires kernel module checking,
fallback to module signature enforcing for the existing syscall.
Without CONFIG_MODULE_SIG_FORCE enabled, the kernel module's
integrity is unknown, return -EACCES.
Changelog v1:
- Fix ima_module_check() return result (Tetsuo Handa)
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
With the addition of the new kernel module syscall, which defines two
arguments - a file descriptor to the kernel module and a pointer to a NULL
terminated string of module arguments - it is now possible to measure and
appraise kernel modules like any other file on the file system.
This patch adds support to measure and appraise kernel modules in an
extensible and consistent manner.
To support filesystems without extended attribute support, additional
patches could pass the signature as the first parameter.
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Pull security subsystem updates from James Morris:
"Highlights:
- Integrity: add local fs integrity verification to detect offline
attacks
- Integrity: add digital signature verification
- Simple stacking of Yama with other LSMs (per LSS discussions)
- IBM vTPM support on ppc64
- Add new driver for Infineon I2C TIS TPM
- Smack: add rule revocation for subject labels"
Fixed conflicts with the user namespace support in kernel/auditsc.c and
security/integrity/ima/ima_policy.c.
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (39 commits)
Documentation: Update git repository URL for Smack userland tools
ima: change flags container data type
Smack: setprocattr memory leak fix
Smack: implement revoking all rules for a subject label
Smack: remove task_wait() hook.
ima: audit log hashes
ima: generic IMA action flag handling
ima: rename ima_must_appraise_or_measure
audit: export audit_log_task_info
tpm: fix tpm_acpi sparse warning on different address spaces
samples/seccomp: fix 31 bit build on s390
ima: digital signature verification support
ima: add support for different security.ima data types
ima: add ima_inode_setxattr/removexattr function and calls
ima: add inode_post_setattr call
ima: replace iint spinblock with rwlock/read_lock
ima: allocating iint improvements
ima: add appraise action keywords and default rules
ima: integrity appraisal extension
vfs: move ima_file_free before releasing the file
...
Use kuid's in the IMA rules.
When reporting the current uid in audit logs use from_kuid
to get a usable value.
Cc: Mimi Zohar <zohar@us.ibm.com>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
This adds an 'audit' policy action which audit logs file measurements.
Changelog v6:
- use new action flag handling (Dmitry Kasatkin).
- removed whitespace (Mimi)
Changelog v5:
- use audit_log_untrustedstring.
Changelog v4:
- cleanup digest -> hash conversion.
- use filename rather than d_path in ima_audit_measurement.
Changelog v3:
- Use newly exported audit_log_task_info for logging pid/ppid/uid/etc.
- Update the ima_policy ABI documentation.
Changelog v2:
- Use 'audit' action rather than 'measure_and_audit' to permit
auditing in the absence of measuring..
Changelog v1:
- Initial posting.
Signed-off-by: Peter Moody <pmoody@google.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Make the IMA action flag handling generic in order to support
additional new actions, without requiring changes to the base
implementation. New actions, like audit logging, will only
need to modify the define statements.
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
When AUDIT action support is added to the IMA,
ima_must_appraise_or_measure() does not reflect the real meaning anymore.
Rename it to ima_get_action().
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
This patch adds support for digital signature based integrity appraisal.
With this patch, 'security.ima' contains either the file data hash or
a digital signature of the file data hash. The file data hash provides
the security attribute of file integrity. In addition to file integrity,
a digital signature provides the security attribute of authenticity.
Unlike EVM, when the file metadata changes, the digital signature is
replaced with an HMAC, modification of the file data does not cause the
'security.ima' digital signature to be replaced with a hash. As a
result, after any modification, subsequent file integrity appraisals
would fail.
Although digitally signed files can be modified, but by not updating
'security.ima' to reflect these modifications, in essence digitally
signed files could be considered 'immutable'.
IMA uses a different keyring than EVM. While the EVM keyring should not
be updated after initialization and locked, the IMA keyring should allow
updating or adding new keys when upgrading or installing packages.
Changelog v4:
- Change IMA_DIGSIG to hex equivalent
Changelog v3:
- Permit files without any 'security.ima' xattr to be labeled properly.
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
IMA-appraisal currently verifies the integrity of a file based on a
known 'good' measurement value. This patch reserves the first byte
of 'security.ima' as a place holder for the type of method used for
verifying file data integrity.
Changelog v1:
- Use the newly defined 'struct evm_ima_xattr_data'
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@nokia.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Based on xattr_permission comments, the restriction to modify 'security'
xattr is left up to the underlying fs or lsm. Ensure that not just anyone
can modify or remove 'security.ima'.
Changelog v1:
- Unless IMA-APPRAISE is configured, use stub ima_inode_removexattr()/setxattr()
functions. (Moved ima_inode_removexattr()/setxattr() to ima_appraise.c)
Changelog:
- take i_mutex to fix locking (Dmitry Kasatkin)
- ima_reset_appraise_flags should only be called when modifying or
removing the 'security.ima' xattr. Requires CAP_SYS_ADMIN privilege.
(Incorporated fix from Roberto Sassu)
- Even if allowed to update security.ima, reset the appraisal flags,
forcing re-appraisal.
- Replace CAP_MAC_ADMIN with CAP_SYS_ADMIN
- static inline ima_inode_setxattr()/ima_inode_removexattr() stubs
- ima_protect_xattr should be static
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
With IMA-appraisal's removal of the iint mutex and taking the i_mutex
instead, allocating the iint becomes a lot simplier, as we don't need
to be concerned with two processes racing to allocate the iint. This
patch cleans up and improves performance for allocating the iint.
- removed redundant double i_mutex locking
- combined iint allocation with tree search
Changelog v2:
- removed the rwlock/read_lock changes from this patch
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Unlike the IMA measurement policy, the appraise policy can not be dependent
on runtime process information, such as the task uid, as the 'security.ima'
xattr is written on file close and must be updated each time the file changes,
regardless of the current task uid.
This patch extends the policy language with 'fowner', defines an appraise
policy, which appraises all files owned by root, and defines 'ima_appraise_tcb',
a new boot command line option, to enable the appraise policy.
Changelog v3:
- separate the measure from the appraise rules in order to support measuring
without appraising and appraising without measuring.
- change appraisal default for filesystems without xattr support to fail
- update default appraise policy for cgroups
Changelog v1:
- don't appraise RAMFS (Dmitry Kasatkin)
- merged rest of "ima: ima_must_appraise_or_measure API change" commit
(Dmtiry Kasatkin)
ima_must_appraise_or_measure() called ima_match_policy twice, which
searched the policy for a matching rule. Once for a matching measurement
rule and subsequently for an appraisal rule. Searching the policy twice
is unnecessary overhead, which could be noticeable with a large policy.
The new version of ima_must_appraise_or_measure() does everything in a
single iteration using a new version of ima_match_policy(). It returns
IMA_MEASURE, IMA_APPRAISE mask.
With the use of action mask only one efficient matching function
is enough. Removed other specific versions of matching functions.
Changelog:
- change 'owner' to 'fowner' to conform to the new LSM conditions posted by
Roberto Sassu.
- fix calls to ima_log_string()
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
IMA currently maintains an integrity measurement list used to assert the
integrity of the running system to a third party. The IMA-appraisal
extension adds local integrity validation and enforcement of the
measurement against a "good" value stored as an extended attribute
'security.ima'. The initial methods for validating 'security.ima' are
hashed based, which provides file data integrity, and digital signature
based, which in addition to providing file data integrity, provides
authenticity.
This patch creates and maintains the 'security.ima' xattr, containing
the file data hash measurement. Protection of the xattr is provided by
EVM, if enabled and configured.
Based on policy, IMA calls evm_verifyxattr() to verify a file's metadata
integrity and, assuming success, compares the file's current hash value
with the one stored as an extended attribute in 'security.ima'.
Changelov v4:
- changed iint cache flags to hex values
Changelog v3:
- change appraisal default for filesystems without xattr support to fail
Changelog v2:
- fix audit msg 'res' value
- removed unused 'ima_appraise=' values
Changelog v1:
- removed unused iint mutex (Dmitry Kasatkin)
- setattr hook must not reset appraised (Dmitry Kasatkin)
- evm_verifyxattr() now differentiates between no 'security.evm' xattr
(INTEGRITY_NOLABEL) and no EVM 'protected' xattrs included in the
'security.evm' (INTEGRITY_NOXATTRS).
- replace hash_status with ima_status (Dmitry Kasatkin)
- re-initialize slab element ima_status on free (Dmitry Kasatkin)
- include 'security.ima' in EVM if CONFIG_IMA_APPRAISE, not CONFIG_IMA
- merged half "ima: ima_must_appraise_or_measure API change" (Dmitry Kasatkin)
- removed unnecessary error variable in process_measurement() (Dmitry Kasatkin)
- use ima_inode_post_setattr() stub function, if IMA_APPRAISE not configured
(moved ima_inode_post_setattr() to ima_appraise.c)
- make sure ima_collect_measurement() can read file
Changelog:
- add 'iint' to evm_verifyxattr() call (Dimitry Kasatkin)
- fix the race condition between chmod, which takes the i_mutex and then
iint->mutex, and ima_file_free() and process_measurement(), which take
the locks in the reverse order, by eliminating iint->mutex. (Dmitry Kasatkin)
- cleanup of ima_appraise_measurement() (Dmitry Kasatkin)
- changes as a result of the iint not allocated for all regular files, but
only for those measured/appraised.
- don't try to appraise new/empty files
- expanded ima_appraisal description in ima/Kconfig
- IMA appraise definitions required even if IMA_APPRAISE not enabled
- add return value to ima_must_appraise() stub
- unconditionally set status = INTEGRITY_PASS *after* testing status,
not before. (Found by Joe Perches)
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
IMA auditing code was compiled even when CONFIG_AUDIT was not enabled.
This patch compiles auditing code only when possible and enabled.
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Set ima_initialized only if initialization was successful.
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
IMA cannot be used as module and does not need __exit functions.
Removed them.
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
The IMA measurement list contains filename hints, which can be
ambigious without the full pathname. This patch replaces the
filename hint with the full pathname, simplifying for userspace
the correlating of file hash measurements with files.
Change log v1:
- Revert to short filenames, when full pathname is longer than IMA
measurement buffer size. (Based on Dmitry's review)
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
When IMA was first upstreamed, the bprm filename and interp were
always the same. Currently, the bprm->filename and bprm->interp
are the same, except for when only bprm->interp contains the
interpreter name. So instead of using the bprm->filename as
the IMA filename hint in the measurement list, we could replace
it with bprm->interp, but this feels too fragil.
The following patch is not much better, but at least there is some
indication that sometimes we're passing the filename and other times
the interpreter name.
Reported-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Fix IMA kconfig warning on non-X86 architectures:
warning: (IMA) selects TCG_TIS which has unmet direct dependencies
(TCG_TPM && X86)
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
The audit res field ususally indicates success with a 1 and 0 for a
failure. So make IMA do it the same way.
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
Fix ima_policy.c sparse "warning: dereference of noderef expression"
message, by accessing cred->uid using current_cred().
Changelog v1:
- Change __cred to just cred (based on David Howell's comment)
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
The use of s_id should go through the untrusted string path, just to be
extra careful.
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Info about new measurements are cached in the iint for performance. When
the inode is flushed from cache, the associated iint is flushed as well.
Subsequent access to the inode will cause the inode to be re-measured and
will attempt to add a duplicate entry to the measurement list.
This patch frees the duplicate measurement memory, fixing a memory leak.
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Cc: stable@vger.kernel.org
* 'for-linus' of git://github.com/richardweinberger/linux: (90 commits)
um: fix ubd cow size
um: Fix kmalloc argument order in um/vdso/vma.c
um: switch to use of drivers/Kconfig
UserModeLinux-HOWTO.txt: fix a typo
UserModeLinux-HOWTO.txt: remove ^H characters
um: we need sys/user.h only on i386
um: merge delay_{32,64}.c
um: distribute exports to where exported stuff is defined
um: kill system-um.h
um: generic ftrace.h will do...
um: segment.h is x86-only and needed only there
um: asm/pda.h is not needed anymore
um: hw_irq.h can go generic as well
um: switch to generic-y
um: clean Kconfig up a bit
um: a couple of missing dependencies...
um: kill useless argument of free_chan() and free_one_chan()
um: unify ptrace_user.h
um: unify KSTK_...
um: fix gcov build breakage
...
Fixes sparse warnings:
security/integrity/ima/ima_main.c:105:6: warning: symbol 'ima_file_free' was not declared. Should it be static?
security/integrity/ima/ima_main.c:167:5: warning: symbol 'ima_file_mmap' was not declared. Should it be static?
security/integrity/ima/ima_main.c:192:5: warning: symbol 'ima_bprm_check' was not declared. Should it be static?
security/integrity/ima/ima_main.c:211:5: warning: symbol 'ima_file_check' was not declared. Should it be static?
Signed-off-by: James Morris <jmorris@namei.org>
Fixes sparse warning:
security/integrity/ima/ima_fs.c:290:5: warning: symbol 'ima_open_policy' was not declared. Should it be static?
Signed-off-by: James Morris <jmorris@namei.org>
Move the inode integrity data(iint) management up to the integrity directory
in order to share the iint among the different integrity models.
Changelog:
- don't define MAX_DIGEST_SIZE
- rename several globally visible 'ima_' prefixed functions, structs,
locks, etc to 'integrity_'
- replace '20' with SHA1_DIGEST_SIZE
- reflect location change in appropriate Kconfig and Makefiles
- remove unnecessary initialization of iint_initialized to 0
- rebased on current ima_iint.c
- define integrity_iint_store/lock as static
There should be no other functional changes.
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Acked-by: Serge Hallyn <serge.hallyn@ubuntu.com>
The original ima_must_measure() function based its results on cached
iint information, which required an iint be allocated for all files.
Currently, an iint is allocated only for files in policy. As a result,
for those files in policy, ima_must_measure() is now called twice: once
to determine if the inode is in the measurement policy and, the second
time, to determine if it needs to be measured/re-measured.
The second call to ima_must_measure() unnecessarily checks to see if
the file is in policy. As we already know the file is in policy, this
patch removes the second unnecessary call to ima_must_measure(), removes
the vestige iint parameter, and just checks the iint directly to determine
if the inode has been measured or needs to be measured/re-measured.
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Acked-by: Eric Paris <eparis@redhat.com>
Now that i_readcount is maintained by the VFS layer, remove the
imbalance checking in IMA. Cleans up the IMA code nicely.
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Acked-by: Eric Paris <eparis@redhat.com>
ima_counts_get() updated the readcount and invalidated the PCR,
as necessary. Only update the i_readcount in the VFS layer.
Move the PCR invalidation checks to ima_file_check(), where it
belongs.
Maintaining the i_readcount in the VFS layer, will allow other
subsystems to use i_readcount.
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Acked-by: Eric Paris <eparis@redhat.com>
If security_filter_rule_init() doesn't return a rule, then not everything
is as fine as the return code implies.
This bug only occurs when the LSM (eg. SELinux) is disabled at runtime.
Adding an empty LSM rule causes ima_match_rules() to always succeed,
ignoring any remaining rules.
default IMA TCB policy:
# PROC_SUPER_MAGIC
dont_measure fsmagic=0x9fa0
# SYSFS_MAGIC
dont_measure fsmagic=0x62656572
# DEBUGFS_MAGIC
dont_measure fsmagic=0x64626720
# TMPFS_MAGIC
dont_measure fsmagic=0x01021994
# SECURITYFS_MAGIC
dont_measure fsmagic=0x73636673
< LSM specific rule >
dont_measure obj_type=var_log_t
measure func=BPRM_CHECK
measure func=FILE_MMAP mask=MAY_EXEC
measure func=FILE_CHECK mask=MAY_READ uid=0
Thus without the patch, with the boot parameters 'tcb selinux=0', adding
the above 'dont_measure obj_type=var_log_t' rule to the default IMA TCB
measurement policy, would result in nothing being measured. The patch
prevents the default TCB policy from being replaced.
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Cc: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Cc: David Safford <safford@watson.ibm.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Current logic looks like this:
rc = ima_must_measure(NULL, inode, MAY_READ, FILE_CHECK);
if (rc < 0)
goto out;
if (mode & FMODE_WRITE) {
if (inode->i_readcount)
send_tomtou = true;
goto out;
}
if (atomic_read(&inode->i_writecount) > 0)
send_writers = true;
Lets assume we have a policy which states that all files opened for read
by root must be measured.
Lets assume the file has permissions 777.
Lets assume that root has the given file open for read.
Lets assume that a non-root process opens the file write.
The non-root process will get to ima_counts_get() and will check the
ima_must_measure(). Since it is not supposed to measure it will goto
out.
We should check the i_readcount no matter what since we might be causing
a ToMToU voilation!
This is close to correct, but still not quite perfect. The situation
could have been that root, which was interested in the mesurement opened
and closed the file and another process which is not interested in the
measurement is the one holding the i_readcount ATM. This is just overly
strict on ToMToU violations, which is better than not strict enough...
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently for every removed inode IMA must take a global lock and search
the IMA rbtree looking for an associated integrity structure. Instead
we explicitly mark an inode when we add an integrity structure so we
only have to take the global lock and do the removal if it exists.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>