Commit Graph

367 Commits

Author SHA1 Message Date
Daniel Borkmann
5ffd5cddd4 net: netlink: filter particular protocols from analyzers
Fix finer-grained control and let only a whitelist of allowed netlink
protocols pass, in our case related to networking. If later on, other
subsystems decide they want to add their protocol as well to the list
of allowed protocols they shall simply add it. While at it, we also
need to tell what protocol is in use otherwise BPF_S_ANC_PROTOCOL can
not pick it up (as it's not filled out).

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-06 14:43:48 -04:00
David S. Miller
06c54055be Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
	net/bridge/br_multicast.c
	net/ipv6/sit.c

The conflicts were minor:

1) sit.c changes overlap with change to ip_tunnel_xmit() signature.

2) br_multicast.c had an overlap between computing max_delay using
   msecs_to_jiffies and turning MLDV2_MRC() into an inline function
   with a name using lowercase instead of uppercase letters.

3) stmmac had two overlapping changes, one which conditionally allocated
   and hooked up a dma_cfg based upon the presence of the pbl OF property,
   and another one handling store-and-forward DMA made.  The latter of
   which should not go into the new of_find_property() basic block.

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05 14:58:52 -04:00
Pravin B Shelar
33c6b1f6b1 genl: Hold reference on correct module while netlink-dump.
netlink dump operations take module as parameter to hold
reference for entire netlink dump duration.
Currently it holds ref only on genl module which is not correct
when we use ops registered to genl from another module.
Following patch adds module pointer to genl_ops so that netlink
can hold ref count on it.

CC: Jesse Gross <jesse@nicira.com>
CC: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-28 17:19:17 -04:00
Pravin B Shelar
9b96309c5b genl: Fix genl dumpit() locking.
In case of genl-family with parallel ops off, dumpif() callback
is expected to run under genl_lock, But commit def3117493
(genl: Allow concurrent genl callbacks.) changed this behaviour
where only first dumpit() op was called under genl-lock.
For subsequent dump, only nlk->cb_lock was taken.
Following patch fixes it by defining locked dumpit() and done()
callback which takes care of genl-locking.

CC: Jesse Gross <jesse@nicira.com>
CC: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-28 17:19:17 -04:00
David S. Miller
b05930f5d1 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/wireless/iwlwifi/pcie/trans.c
	include/linux/inetdevice.h

The inetdevice.h conflict involves moving the IPV4_DEVCONF values
into a UAPI header, overlapping additions of some new entries.

The iwlwifi conflict is a context overlap.

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-26 16:37:08 -04:00
Johannes Berg
9d47b38056 Revert "genetlink: fix family dump race"
This reverts commit 58ad436fcf.

It turns out that the change introduced a potential deadlock
by causing a locking dependency with netlink's cb_mutex. I
can't seem to find a way to resolve this without doing major
changes to the locking, so revert this.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-22 13:24:02 -07:00
David S. Miller
2ff1cf12c9 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2013-08-16 15:37:26 -07:00
Pravin B Shelar
16b304f340 netlink: Eliminate kmalloc in netlink dump operation.
Following patch stores struct netlink_callback in netlink_sock
to avoid allocating and freeing it on every netlink dump msg.
Only one dump operation is allowed for a given socket at a time
therefore we can safely convert cb pointer to cb struct inside
netlink_sock.

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-15 15:51:20 -07:00
Johannes Berg
58ad436fcf genetlink: fix family dump race
When dumping generic netlink families, only the first dump call
is locked with genl_lock(), which protects the list of families,
and thus subsequent calls can access the data without locking,
racing against family addition/removal. This can cause a crash.
Fix it - the locking needs to be conditional because the first
time around it's already locked.

A similar bug was reported to me on an old kernel (3.4.47) but
the exact scenario that happened there is no longer possible,
on those kernels the first round wasn't locked either. Looking
at the current code I found the race described above, which had
also existed on the old kernel.

Cc: stable@vger.kernel.org
Reported-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-13 00:57:06 -07:00
David S. Miller
0e76a3a587 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Merge net into net-next to setup some infrastructure Eric
Dumazet needs for usbnet changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03 21:36:46 -07:00
Daniel Borkmann
8a849bb7f0 net: netlink: minor: remove unused pointer in alloc_pg_vec
Variable ptr is being assigned, but never used, so just remove it.

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-02 15:26:12 -07:00
Pablo Neira
e1ee3673a8 genetlink: fix usage of NLM_F_EXCL or NLM_F_REPLACE
Currently, it is not possible to use neither NLM_F_EXCL nor
NLM_F_REPLACE from genetlink. This is due to this checking in
genl_family_rcv_msg:

	if (nlh->nlmsg_flags & NLM_F_DUMP)

NLM_F_DUMP is NLM_F_MATCH|NLM_F_ROOT. Thus, if NLM_F_EXCL or
NLM_F_REPLACE flag is set, genetlink believes that you're
requesting a dump and it calls the .dumpit callback.

The solution that I propose is to refine this checking to
make it stricter:

	if ((nlh->nlmsg_flags & NLM_F_DUMP) == NLM_F_DUMP)

And given the combination NLM_F_REPLACE and NLM_F_EXCL does
not make sense to me, it removes the ambiguity.

There was a patch that tried to fix this some time ago (0ab03c2
netlink: test for all flags of the NLM_F_DUMP composite) but it
tried to resolve this ambiguity in *all* existing netlink subsystems,
not only genetlink. That patch was reverted since it broke iproute2,
which is using NLM_F_ROOT to request the dump of the routing cache.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-30 16:43:19 -07:00
Stanislaw Gruszka
c74f2b2678 genetlink: release cb_lock before requesting additional module
Requesting external module with cb_lock taken can result in
the deadlock like showed below:

[ 2458.111347] Showing all locks held in the system:
[ 2458.111347] 1 lock held by NetworkManager/582:
[ 2458.111347]  #0:  (cb_lock){++++++}, at: [<ffffffff8162bc79>] genl_rcv+0x19/0x40
[ 2458.111347] 1 lock held by modprobe/603:
[ 2458.111347]  #0:  (cb_lock){++++++}, at: [<ffffffff8162baa5>] genl_lock_all+0x15/0x30

[ 2461.579457] SysRq : Show Blocked State
[ 2461.580103]   task                        PC stack   pid father
[ 2461.580103] NetworkManager  D ffff880034b84500  4040   582      1 0x00000080
[ 2461.580103]  ffff8800197ff720 0000000000000046 00000000001d5340 ffff8800197fffd8
[ 2461.580103]  ffff8800197fffd8 00000000001d5340 ffff880019631700 7fffffffffffffff
[ 2461.580103]  ffff8800197ff880 ffff8800197ff878 ffff880019631700 ffff880019631700
[ 2461.580103] Call Trace:
[ 2461.580103]  [<ffffffff817355f9>] schedule+0x29/0x70
[ 2461.580103]  [<ffffffff81731ad1>] schedule_timeout+0x1c1/0x360
[ 2461.580103]  [<ffffffff810e69eb>] ? mark_held_locks+0xbb/0x140
[ 2461.580103]  [<ffffffff817377ac>] ? _raw_spin_unlock_irq+0x2c/0x50
[ 2461.580103]  [<ffffffff810e6b6d>] ? trace_hardirqs_on_caller+0xfd/0x1c0
[ 2461.580103]  [<ffffffff81736398>] wait_for_completion_killable+0xe8/0x170
[ 2461.580103]  [<ffffffff810b7fa0>] ? wake_up_state+0x20/0x20
[ 2461.580103]  [<ffffffff81095825>] call_usermodehelper_exec+0x1a5/0x210
[ 2461.580103]  [<ffffffff817362ed>] ? wait_for_completion_killable+0x3d/0x170
[ 2461.580103]  [<ffffffff81095cc3>] __request_module+0x1b3/0x370
[ 2461.580103]  [<ffffffff810e6b6d>] ? trace_hardirqs_on_caller+0xfd/0x1c0
[ 2461.580103]  [<ffffffff8162c5c9>] ctrl_getfamily+0x159/0x190
[ 2461.580103]  [<ffffffff8162d8a4>] genl_family_rcv_msg+0x1f4/0x2e0
[ 2461.580103]  [<ffffffff8162d990>] ? genl_family_rcv_msg+0x2e0/0x2e0
[ 2461.580103]  [<ffffffff8162da1e>] genl_rcv_msg+0x8e/0xd0
[ 2461.580103]  [<ffffffff8162b729>] netlink_rcv_skb+0xa9/0xc0
[ 2461.580103]  [<ffffffff8162bc88>] genl_rcv+0x28/0x40
[ 2461.580103]  [<ffffffff8162ad6d>] netlink_unicast+0xdd/0x190
[ 2461.580103]  [<ffffffff8162b149>] netlink_sendmsg+0x329/0x750
[ 2461.580103]  [<ffffffff815db849>] sock_sendmsg+0x99/0xd0
[ 2461.580103]  [<ffffffff810bb58f>] ? local_clock+0x5f/0x70
[ 2461.580103]  [<ffffffff810e96e8>] ? lock_release_non_nested+0x308/0x350
[ 2461.580103]  [<ffffffff815dbc6e>] ___sys_sendmsg+0x39e/0x3b0
[ 2461.580103]  [<ffffffff810565af>] ? kvm_clock_read+0x2f/0x50
[ 2461.580103]  [<ffffffff810218b9>] ? sched_clock+0x9/0x10
[ 2461.580103]  [<ffffffff810bb2bd>] ? sched_clock_local+0x1d/0x80
[ 2461.580103]  [<ffffffff810bb448>] ? sched_clock_cpu+0xa8/0x100
[ 2461.580103]  [<ffffffff810e33ad>] ? trace_hardirqs_off+0xd/0x10
[ 2461.580103]  [<ffffffff810bb58f>] ? local_clock+0x5f/0x70
[ 2461.580103]  [<ffffffff810e3f7f>] ? lock_release_holdtime.part.28+0xf/0x1a0
[ 2461.580103]  [<ffffffff8120fec9>] ? fget_light+0xf9/0x510
[ 2461.580103]  [<ffffffff8120fe0c>] ? fget_light+0x3c/0x510
[ 2461.580103]  [<ffffffff815dd1d2>] __sys_sendmsg+0x42/0x80
[ 2461.580103]  [<ffffffff815dd222>] SyS_sendmsg+0x12/0x20
[ 2461.580103]  [<ffffffff81741ad9>] system_call_fastpath+0x16/0x1b
[ 2461.580103] modprobe        D ffff88000f2c8000  4632   603    602 0x00000080
[ 2461.580103]  ffff88000f04fba8 0000000000000046 00000000001d5340 ffff88000f04ffd8
[ 2461.580103]  ffff88000f04ffd8 00000000001d5340 ffff8800377d4500 ffff8800377d4500
[ 2461.580103]  ffffffff81d0b260 ffffffff81d0b268 ffffffff00000000 ffffffff81d0b2b0
[ 2461.580103] Call Trace:
[ 2461.580103]  [<ffffffff817355f9>] schedule+0x29/0x70
[ 2461.580103]  [<ffffffff81736d4d>] rwsem_down_write_failed+0xed/0x1a0
[ 2461.580103]  [<ffffffff810bb200>] ? update_cpu_load_active+0x10/0xb0
[ 2461.580103]  [<ffffffff8137b473>] call_rwsem_down_write_failed+0x13/0x20
[ 2461.580103]  [<ffffffff8173492d>] ? down_write+0x9d/0xb2
[ 2461.580103]  [<ffffffff8162baa5>] ? genl_lock_all+0x15/0x30
[ 2461.580103]  [<ffffffff8162baa5>] genl_lock_all+0x15/0x30
[ 2461.580103]  [<ffffffff8162cbb3>] genl_register_family+0x53/0x1f0
[ 2461.580103]  [<ffffffffa01dc000>] ? 0xffffffffa01dbfff
[ 2461.580103]  [<ffffffff8162d650>] genl_register_family_with_ops+0x20/0x80
[ 2461.580103]  [<ffffffffa01dc000>] ? 0xffffffffa01dbfff
[ 2461.580103]  [<ffffffffa017fe84>] nl80211_init+0x24/0xf0 [cfg80211]
[ 2461.580103]  [<ffffffffa01dc000>] ? 0xffffffffa01dbfff
[ 2461.580103]  [<ffffffffa01dc043>] cfg80211_init+0x43/0xdb [cfg80211]
[ 2461.580103]  [<ffffffff810020fa>] do_one_initcall+0xfa/0x1b0
[ 2461.580103]  [<ffffffff8105cb93>] ? set_memory_nx+0x43/0x50
[ 2461.580103]  [<ffffffff810f75af>] load_module+0x1c6f/0x27f0
[ 2461.580103]  [<ffffffff810f2c90>] ? store_uevent+0x40/0x40
[ 2461.580103]  [<ffffffff810f82c6>] SyS_finit_module+0x86/0xb0
[ 2461.580103]  [<ffffffff81741ad9>] system_call_fastpath+0x16/0x1b
[ 2461.580103] Sched Debug Version: v0.10, 3.11.0-0.rc1.git4.1.fc20.x86_64 #1

Problem start to happen after adding net-pf-16-proto-16-family-nl80211
alias name to cfg80211 module by below commit (though that commit
itself is perfectly fine):

commit fb4e156886
Author: Marcel Holtmann <marcel@holtmann.org>
Date:   Sun Apr 28 16:22:06 2013 -0700

    nl80211: Add generic netlink module alias for cfg80211/nl80211

Reported-and-tested-by: Jeff Layton <jlayton@redhat.com>
Reported-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Reviewed-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-27 22:19:20 -07:00
Pablo Neira
3a36515f72 netlink: fix splat in skb_clone with large messages
Since (c05cdb1 netlink: allow large data transfers from user-space),
netlink splats if it invokes skb_clone on large netlink skbs since:

* skb_shared_info was not correctly initialized.
* skb->destructor is not set in the cloned skb.

This was spotted by trinity:

[  894.990671] BUG: unable to handle kernel paging request at ffffc9000047b001
[  894.991034] IP: [<ffffffff81a212c4>] skb_clone+0x24/0xc0
[...]
[  894.991034] Call Trace:
[  894.991034]  [<ffffffff81ad299a>] nl_fib_input+0x6a/0x240
[  894.991034]  [<ffffffff81c3b7e6>] ? _raw_read_unlock+0x26/0x40
[  894.991034]  [<ffffffff81a5f189>] netlink_unicast+0x169/0x1e0
[  894.991034]  [<ffffffff81a601e1>] netlink_sendmsg+0x251/0x3d0

Fix it by:

1) introducing a new netlink_skb_clone function that is used in nl_fib_input,
   that sets our special skb->destructor in the cloned skb. Moreover, handle
   the release of the large cloned skb head area in the destructor path.

2) not allowing large skbuffs in the netlink broadcast path. I cannot find
   any reasonable use of the large data transfer using netlink in that path,
   moreover this helps to skip extra skb_clone handling.

I found two more netlink clients that are cloning the skbs, but they are
not in the sendmsg path. Therefore, the sole client cloning that I found
seems to be the fib frontend.

Thanks to Eric Dumazet for helping to address this issue.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-27 22:44:16 -07:00
Daniel Borkmann
bcbde0d449 net: netlink: virtual tap device management
Similarly to the networking receive path with ptype_all taps, we add
the possibility to register netdevices that are for ARPHRD_NETLINK to
the netlink subsystem, so that those can be used for netlink analyzers
resp. debuggers. We do not offer a direct callback function as out-of-tree
modules could do crap with it. Instead, a netdevice must be registered
properly and only receives a clone, managed by the netlink layer. Symbols
are exported as GPL-only.

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-24 16:39:05 -07:00
David S. Miller
d98cae64e4 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/wireless/ath/ath9k/Kconfig
	drivers/net/xen-netback/netback.c
	net/batman-adv/bat_iv_ogm.c
	net/wireless/nl80211.c

The ath9k Kconfig conflict was a change of a Kconfig option name right
next to the deletion of another option.

The xen-netback conflict was overlapping changes involving the
handling of the notify list in xen_netbk_rx_action().

Batman conflict resolution provided by Antonio Quartulli, basically
keep everything in both conflict hunks.

The nl80211 conflict is a little more involved.  In 'net' we added a
dynamic memory allocation to nl80211_dump_wiphy() to fix a race that
Linus reported.  Meanwhile in 'net-next' the handlers were converted
to use pre and post doit handlers which use a flag to determine
whether to hold the RTNL mutex around the operation.

However, the dump handlers to not use this logic.  Instead they have
to explicitly do the locking.  There were apparent bugs in the
conversion of nl80211_dump_wiphy() in that we were not dropping the
RTNL mutex in all the return paths, and it seems we very much should
be doing so.  So I fixed that whilst handling the overlapping changes.

To simplify the initial returns, I take the RTNL mutex after we try
to allocate 'tb'.

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19 16:49:39 -07:00
Gao feng
ca15febfe9 netlink: make compare exist all the time
Commit da12c90e09
"netlink: Add compare function for netlink_table"
only set compare at the time we create kernel netlink,
and reset compare to NULL at the time we finially
release netlink socket, but netlink_lookup wants
the compare exist always.

So we should set compare after we allocate nl_table,
and never reset it. make comapre exist all the time.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-13 00:45:48 -07:00
Patrick McHardy
7cdbac71f9 netlink: fix error propagation in netlink_mmap()
Return the error if something went wrong instead of unconditionally
returning 0.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-11 02:52:47 -07:00
Gao feng
da12c90e09 netlink: Add compare function for netlink_table
As we know, netlink sockets are private resource of
net namespace, they can communicate with each other
only when they in the same net namespace. this works
well until we try to add namespace support for other
subsystems which use netlink.

Don't like ipv4 and route table.., it is not suited to
make these subsytems belong to net namespace, Such as
audit and crypto subsystems,they are more suitable to
user namespace.

So we must have the ability to make the netlink sockets
in same user namespace can communicate with each other.

This patch adds a new function pointer "compare" for
netlink_table, we can decide if the netlink sockets can
communicate with each other through this netlink_table
self-defined compare function.

The behavior isn't changed if we don't provide the compare
function for netlink_table.

Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-11 02:39:42 -07:00
Pablo Neira Ayuso
c05cdb1b86 netlink: allow large data transfers from user-space
I can hit ENOBUFS in the sendmsg() path with a large batch that is
composed of many netlink messages. Here that limit is 8 MBytes of
skbuff data area as kmalloc does not manage to get more than that.

While discussing atomic rule-set for nftables with Patrick McHardy,
we decided to put all rule-set updates that need to be applied
atomically in one single batch to simplify the existing approach.
However, as explained above, the existing netlink code limits us
to a maximum of ~20000 rules that fit in one single batch without
hitting ENOBUFS. iptables does not have such limitation as it is
using vmalloc.

This patch adds netlink_alloc_large_skb() which is only used in
the netlink_sendmsg() path. It uses alloc_skb if the memory
requested is <= one memory page, that should be the common case
for most subsystems, else vmalloc for higher memory allocations.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-07 16:26:34 -07:00
Pablo Neira
5e71d9d77c net: fix sk_buff head without data area
Eric Dumazet spotted that we have to check skb->head instead
of skb->data as skb->head points to the beginning of the
data area of the skbuff. Similarly, we have to initialize the
skb->head pointer, not skb->data in __alloc_skb_head.

After this fix, netlink crashes in the release path of the
sk_buff, so let's fix that as well.

This bug was introduced in (0ebd0ac net: add function to
allocate sk_buff head without data area).

Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-04 17:26:49 -07:00
Daniel Borkmann
ee1bec9b3b netlink: kconfig: move mmap i/o into netlink kconfig
Currently, in menuconfig, Netlink's new mmaped IO is the very first
entry under the ``Networking support'' item and comes even before
``Networking options'':

  [ ]   Netlink: mmaped IO
  Networking options  --->
  ...

Lets move this into ``Networking options'' under netlink's Kconfig,
since this might be more appropriate. Introduced by commit ccdfcc398
(``netlink: mmaped netlink: ring setup'').

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-01 15:02:42 -04:00
Pravin B Shelar
ae6164adeb netlink: Fix skb ref counting.
Commit f9c2288837 (netlink:
implement memory mapped recvmsg) increamented skb->users
ref count twice for a dump op which does not look right.

Following patch fixes that.

CC: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-01 14:57:03 -04:00
Wei Yongjun
50754d2188 genetlink: fix possible memory leak in genl_family_rcv_msg()
'attrbuf' is malloced in genl_family_rcv_msg() when family->maxattr &&
family->parallel_ops, thus should be freed before leaving from the error
handling cases, otherwise it will cause memory leak.

Introduced by commit def3117493
(genl: Allow concurrent genl callbacks.)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-26 23:25:39 -04:00
Pravin B Shelar
def3117493 genl: Allow concurrent genl callbacks.
All genl callbacks are serialized by genl-mutex. This can become
bottleneck in multi threaded case.
Following patch adds an parameter to genl_family so that a
particular family can get concurrent netlink callback without
genl_lock held.
New rw-sem is used to protect genl callback from genl family unregister.
in case of parallel_ops genl-family read-lock is taken for callbacks and
write lock is taken for register or unregistration for any family.
In case of locked genl family semaphore and gel-mutex is locked for
any openration.

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-25 01:43:15 -04:00
Nicolas Dichtel
1bf9310a13 netlink: fix compilation after memory mapped patches
Depending of the kernel configuration (CONFIG_UIDGID_STRICT_TYPE_CHECKS), we can
get the following errors:

net/netlink/af_netlink.c: In function ‘netlink_queue_mmaped_skb’:
net/netlink/af_netlink.c:663:14: error: incompatible types when assigning to type ‘__u32’ from type ‘kuid_t’
net/netlink/af_netlink.c:664:14: error: incompatible types when assigning to type ‘__u32’ from type ‘kgid_t’
net/netlink/af_netlink.c: In function ‘netlink_ring_set_copied’:
net/netlink/af_netlink.c:693:14: error: incompatible types when assigning to type ‘__u32’ from type ‘kuid_t’
net/netlink/af_netlink.c:694:14: error: incompatible types when assigning to type ‘__u32’ from type ‘kgid_t’

We must use the helpers to get the uid and gid, and also take care of user_ns.

Fix suggested by Eric W. Biederman <ebiederm@xmission.com>.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-24 14:26:55 -04:00
David S. Miller
3dec2246c2 netlink: Fix build with mmap disabled.
net/netlink/diag.c: In function 'sk_diag_put_rings_cfg':
net/netlink/diag.c:28:17: error: 'struct netlink_sock' has no member named 'pg_vec_lock'
net/netlink/diag.c:29:29: error: 'struct netlink_sock' has no member named 'rx_ring'
net/netlink/diag.c:31:30: error: 'struct netlink_sock' has no member named 'tx_ring'
net/netlink/diag.c:33:19: error: 'struct netlink_sock' has no member named 'pg_vec_lock'

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-23 15:39:03 -04:00
Stephen Rothwell
1d5085cbab netlink: fix typo in net/netlink/af_netlink.c
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-23 13:09:33 -04:00
Patrick McHardy
4ae9fbee16 netlink: add RX/TX-ring support to netlink diag
Based on AF_PACKET.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19 14:57:58 -04:00
Patrick McHardy
cd1df525da netlink: add flow control for memory mapped I/O
Add flow control for memory mapped RX. Since user-space usually doesn't
invoke recvmsg() when using memory mapped I/O, flow control is performed
in netlink_poll(). Dumps are allowed to continue if at least half of the
ring frames are unused.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19 14:57:58 -04:00
Patrick McHardy
f9c2288837 netlink: implement memory mapped recvmsg()
Add support for mmap'ed recvmsg(). To allow the kernel to construct messages
into the mapped area, a dataless skb is allocated and the data pointer is
set to point into the ring frame. This means frames will be delivered to
userspace in order of allocation instead of order of transmission. This
usually doesn't matter since the order is either not determinable by
userspace or message creation/transmission is serialized. The only case
where this can have a visible difference is nfnetlink_queue. Userspace
can't assume mmap'ed messages have ordered IDs anymore and needs to check
this if using batched verdicts.

For non-mapped sockets, nothing changes.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19 14:57:58 -04:00
Patrick McHardy
5fd96123ee netlink: implement memory mapped sendmsg()
Add support for mmap'ed sendmsg() to netlink. Since the kernel validates
received messages before processing them, the code makes sure userspace
can't modify the message contents after invoking sendmsg(). To do that
only a single mapping of the TX ring is allowed to exist and the socket
must not be shared. If either of these two conditions does not hold, it
falls back to copying.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19 14:57:57 -04:00
Patrick McHardy
9652e931e7 netlink: add mmap'ed netlink helper functions
Add helper functions for looking up mmap'ed frame headers, reading and
writing their status, allocating skbs with mmap'ed data areas and a poll
function.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19 14:57:57 -04:00
Patrick McHardy
ccdfcc3985 netlink: mmaped netlink: ring setup
Add support for mmap'ed RX and TX ring setup and teardown based on the
af_packet.c code. The following patches will use this to add the real
mmap'ed receive and transmit functionality.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19 14:57:57 -04:00
Patrick McHardy
cf0a018ac6 netlink: add netlink_skb_set_owner_r()
For mmap'ed I/O a netlink specific skb destructor needs to be invoked
after the final kfree_skb() to clean up state. This doesn't work currently
since the skb's ownership is transfered to the receiving socket using
skb_set_owner_r(), which orphans the skb, thereby invoking the destructor
prematurely.

Since netlink doesn't account skbs to the originating socket, there's no
need to orphan the skb. Add a netlink specific skb_set_owner_r() variant
that does not orphan the skb and use a netlink specific destructor to
call sock_rfree().

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19 14:57:57 -04:00
Patrick McHardy
1298ca4671 netlink: don't orphan skb in netlink_trim()
Netlink doesn't account skbs to the sending socket, so the there's no
need to orphan the skb before trimming it.

Removing the skb_orphan() call is required for mmap'ed netlink, which uses
a netlink specific skb destructor that must not be invoked before the
final freeing of the skb.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19 14:57:57 -04:00
Patrick McHardy
e32123e598 netlink: rename ssk to sk in struct netlink_skb_params
Memory mapped netlink needs to store the receiving userspace socket
when sending from the kernel to userspace. Rename 'ssk' to 'sk' to
avoid confusion.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19 14:57:56 -04:00
Patrick McHardy
cd967e0571 netlink: add symbolic value for congested state
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19 14:57:56 -04:00
Hong zhi guo
573ce260b3 net-next: replace obsolete NLMSG_* with type safe nlmsg_*
Signed-off-by: Hong Zhiguo <honkiko@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-28 14:25:25 -04:00
Andrey Vagin
eaaa313926 netlink: Diag core and basic socket info dumping (v2)
The netlink_diag can be built as a module, just like it's done in
unix sockets.

The core dumping message carries the basic info about netlink sockets:
family, type and protocol, portis, dst_group, dst_portid, state.

Groups can be received as an optional parameter NETLINK_DIAG_GROUPS.

Netlink sockets cab be filtered by protocols.

The socket inode number and cookie is reserved for future per-socket info
retrieving. The per-protocol filtering is also reserved for future by
requiring the sdiag_protocol to be zero.

The file /proc/net/netlink doesn't provide enough information for
dumping netlink sockets. It doesn't provide dst_group, dst_portid,
groups above 32.

v2: fix NETLINK_DIAG_MAX. Now it's equal to the last constant.

Acked-by: Pavel Emelyanov <xemul@parallels.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Gao feng <gaofeng@cn.fujitsu.com>
Cc: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-21 12:38:03 -04:00
Andrey Vagin
0f29c76864 net: prepare netlink code for netlink diag
Move a few declarations in a header.

Acked-by: Pavel Emelyanov <xemul@parallels.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Gao feng <gaofeng@cn.fujitsu.com>
Cc: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-21 12:38:02 -04:00
Masatake YAMATO
f1e79e2080 genetlink: trigger BUG_ON if a group name is too long
Trigger BUG_ON if a group name is longer than GENL_NAMSIZ.

Signed-off-by: Masatake YAMATO <yamato@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20 12:05:51 -04:00
Sasha Levin
b67bfe0d42 hlist: drop the node parameter from iterators
I'm not sure why, but the hlist for each entry iterators were conceived

        list_for_each_entry(pos, head, member)

The hlist ones were greedy and wanted an extra parameter:

        hlist_for_each_entry(tpos, pos, head, member)

Why did they need an extra pos parameter? I'm not quite sure. Not only
they don't really need it, it also prevents the iterator from looking
exactly like the list iterator, which is unfortunate.

Besides the semantic patch, there was some manual work required:

 - Fix up the actual hlist iterators in linux/list.h
 - Fix up the declaration of other iterators based on the hlist ones.
 - A very small amount of places were using the 'node' parameter, this
 was modified to use 'obj->member' instead.
 - Coccinelle didn't handle the hlist_for_each_entry_safe iterator
 properly, so those had to be fixed up manually.

The semantic patch which is mostly the work of Peter Senna Tschudin is here:

@@
iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host;

type T;
expression a,c,d,e;
identifier b;
statement S;
@@

-T b;
    <+... when != b
(
hlist_for_each_entry(a,
- b,
c, d) S
|
hlist_for_each_entry_continue(a,
- b,
c) S
|
hlist_for_each_entry_from(a,
- b,
c) S
|
hlist_for_each_entry_rcu(a,
- b,
c, d) S
|
hlist_for_each_entry_rcu_bh(a,
- b,
c, d) S
|
hlist_for_each_entry_continue_rcu_bh(a,
- b,
c) S
|
for_each_busy_worker(a, c,
- b,
d) S
|
ax25_uid_for_each(a,
- b,
c) S
|
ax25_for_each(a,
- b,
c) S
|
inet_bind_bucket_for_each(a,
- b,
c) S
|
sctp_for_each_hentry(a,
- b,
c) S
|
sk_for_each(a,
- b,
c) S
|
sk_for_each_rcu(a,
- b,
c) S
|
sk_for_each_from
-(a, b)
+(a)
S
+ sk_for_each_from(a) S
|
sk_for_each_safe(a,
- b,
c, d) S
|
sk_for_each_bound(a,
- b,
c) S
|
hlist_for_each_entry_safe(a,
- b,
c, d, e) S
|
hlist_for_each_entry_continue_rcu(a,
- b,
c) S
|
nr_neigh_for_each(a,
- b,
c) S
|
nr_neigh_for_each_safe(a,
- b,
c, d) S
|
nr_node_for_each(a,
- b,
c) S
|
nr_node_for_each_safe(a,
- b,
c, d) S
|
- for_each_gfn_sp(a, c, d, b) S
+ for_each_gfn_sp(a, c, d) S
|
- for_each_gfn_indirect_valid_sp(a, c, d, b) S
+ for_each_gfn_indirect_valid_sp(a, c, d) S
|
for_each_host(a,
- b,
c) S
|
for_each_host_safe(a,
- b,
c, d) S
|
for_each_mesh_entry(a,
- b,
c, d) S
)
    ...+>

[akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c]
[akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c]
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix warnings]
[akpm@linux-foudnation.org: redo intrusive kvm changes]
Tested-by: Peter Senna Tschudin <peter.senna@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 19:10:24 -08:00
Linus Torvalds
d895cb1af1 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs pile (part one) from Al Viro:
 "Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent
  locking violations, etc.

  The most visible changes here are death of FS_REVAL_DOT (replaced with
  "has ->d_weak_revalidate()") and a new helper getting from struct file
  to inode.  Some bits of preparation to xattr method interface changes.

  Misc patches by various people sent this cycle *and* ocfs2 fixes from
  several cycles ago that should've been upstream right then.

  PS: the next vfs pile will be xattr stuff."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits)
  saner proc_get_inode() calling conventions
  proc: avoid extra pde_put() in proc_fill_super()
  fs: change return values from -EACCES to -EPERM
  fs/exec.c: make bprm_mm_init() static
  ocfs2/dlm: use GFP_ATOMIC inside a spin_lock
  ocfs2: fix possible use-after-free with AIO
  ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path
  get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero
  target: writev() on single-element vector is pointless
  export kernel_write(), convert open-coded instances
  fs: encode_fh: return FILEID_INVALID if invalid fid_type
  kill f_vfsmnt
  vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op
  nfsd: handle vfs_getattr errors in acl protocol
  switch vfs_getattr() to struct path
  default SET_PERSONALITY() in linux/elf.h
  ceph: prepopulate inodes only when request is aborted
  d_hash_and_lookup(): export, switch open-coded instances
  9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate()
  9p: split dropping the acls from v9fs_set_create_acl()
  ...
2013-02-26 20:16:07 -08:00
Al Viro
496ad9aa8e new helper: file_inode(file)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-22 23:31:31 -05:00
Gao feng
ece31ffd53 net: proc: change proc_net_remove to remove_proc_entry
proc_net_remove is only used to remove proc entries
that under /proc/net,it's not a general function for
removing proc entries of netns. if we want to remove
some proc entries which under /proc/net/stat/, we still
need to call remove_proc_entry.

this patch use remove_proc_entry to replace proc_net_remove.
we can remove proc_net_remove after this patch.

Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-18 14:53:08 -05:00
Gao feng
d4beaa66ad net: proc: change proc_net_fops_create to proc_create
Right now, some modules such as bonding use proc_create
to create proc entries under /proc/net/, and other modules
such as ipv4 use proc_net_fops_create.

It looks a little chaos.this patch changes all of
proc_net_fops_create to proc_create. we can remove
proc_net_fops_create after this patch.

Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-18 14:53:08 -05:00
YOSHIFUJI Hideaki / 吉藤英明
fab2574591 netlink: Use FIELD_SIZEOF() in netlink_proto_init().
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-09 23:38:23 -08:00
Hannes Frederic Sowa
4e4b53768f netlink: validate addr_len on bind
Otherwise an out of bounds read could happen.

Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-17 20:50:51 -08:00
Hannes Frederic Sowa
9f1e0ad0ad netlink: change presentation of portid in procfs to unsigned
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-17 20:50:51 -08:00
Eric W. Biederman
df008c91f8 net: Allow userns root to control llc, netfilter, netlink, packet, and xfrm
Allow an unpriviled user who has created a user namespace, and then
created a network namespace to effectively use the new network
namespace, by reducing capable(CAP_NET_ADMIN) and
capable(CAP_NET_RAW) calls to be ns_capable(net->user_ns,
CAP_NET_ADMIN), or capable(net->user_ns, CAP_NET_RAW) calls.

Allow creation of af_key sockets.
Allow creation of llc sockets.
Allow creation of af_packet sockets.

Allow sending xfrm netlink control messages.

Allow binding to netlink multicast groups.
Allow sending to netlink multicast groups.
Allow adding and dropping netlink multicast groups.
Allow sending to all netlink multicast groups and port ids.

Allow reading the netfilter SO_IP_SET socket option.
Allow sending netfilter netlink messages.
Allow setting and getting ip_vs netfilter socket options.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-18 20:32:45 -05:00
Eric Dumazet
6d772ac557 netlink: use kfree_rcu() in netlink_release()
On some suspend/resume operations involving wimax device, we have
noticed some intermittent memory corruptions in netlink code.

Stéphane Marchesin tracked this corruption in netlink_update_listeners()
and suggested a patch.

It appears netlink_release() should use kfree_rcu() instead of kfree()
for the listeners structure as it may be used by other cpus using RCU
protection.

netlink_release() must set to NULL the listeners pointer when
it is about to be freed.

Also have to protect netlink_update_listeners() and
netlink_has_listeners() if listeners is NULL.

Add a nl_deref_protected() lockdep helper to properly document which
locks protects us.

Reported-by: Jonathan Kliegman <kliegs@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Stéphane Marchesin <marcheu@google.com>
Cc: Sam Leffler <sleffler@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-18 15:34:30 -04:00
Gao feng
6dc878a8ca netlink: add reference of module in netlink_dump_start
I get a panic when I use ss -a and rmmod inet_diag at the
same time.

It's because netlink_dump uses inet_diag_dump which belongs to module
inet_diag.

I search the codes and find many modules have the same problem.  We
need to add a reference to the module which the cb->dump belongs to.

Thanks for all help from Stephen,Jan,Eric,Steffen and Pablo.

Change From v3:
change netlink_dump_start to inline,suggestion from Pablo and
Eric.

Change From v2:
delete netlink_dump_done,and call module_put in netlink_dump
and netlink_sock_destruct.

Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-07 00:30:56 -04:00
Eric W. Biederman
15e473046c netlink: Rename pid to portid to avoid confusion
It is a frequent mistake to confuse the netlink port identifier with a
process identifier.  Try to reduce this confusion by renaming fields
that hold port identifiers portid instead of pid.

I have carefully avoided changing the structures exported to
userspace to avoid changing the userspace API.

I have successfully built an allyesconfig kernel with this change.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-10 15:30:41 -04:00
Pablo Neira Ayuso
9f00d9776b netlink: hide struct module parameter in netlink_kernel_create
This patch defines netlink_kernel_create as a wrapper function of
__netlink_kernel_create to hide the struct module *me parameter
(which seems to be THIS_MODULE in all existing netlink subsystems).

Suggested by David S. Miller.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-08 18:46:30 -04:00
Pablo Neira Ayuso
9785e10aed netlink: kill netlink_set_nonroot
Replace netlink_set_nonroot by one new field `flags' in
struct netlink_kernel_cfg that is passed to netlink_kernel_create.

This patch also renames NL_NONROOT_* to NL_CFG_F_NONROOT_* since
now the flags field in nl_table is generic (so we can add more
flags if needed in the future).

Also adjust all callers in the net-next tree to use these flags
instead of netlink_set_nonroot.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-08 18:45:27 -04:00
Eric W. Biederman
dbe9a4173e scm: Don't use struct ucred in NETLINK_CB and struct scm_cookie.
Passing uids and gids on NETLINK_CB from a process in one user
namespace to a process in another user namespace can result in the
wrong uid or gid being presented to userspace.  Avoid that problem by
passing kuids and kgids instead.

- define struct scm_creds for use in scm_cookie and netlink_skb_parms
  that holds uid and gid information in kuid_t and kgid_t.

- Modify scm_set_cred to fill out scm_creds by heand instead of using
  cred_to_ucred to fill out struct ucred.  This conversion ensures
  userspace does not get incorrect uid or gid values to look at.

- Modify scm_recv to convert from struct scm_creds to struct ucred
  before copying credential values to userspace.

- Modify __scm_send to populate struct scm_creds on in the scm_cookie,
  instead of just copying struct ucred from userspace.

- Modify netlink_sendmsg to copy scm_creds instead of struct ucred
  into the NETLINK_CB.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-07 14:42:05 -04:00
David S. Miller
c32f38619a Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Merge the 'net' tree to get the recent set of netfilter bug fixes in
order to assist with some merge hassles Pablo is going to have to deal
with for upcoming changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-31 15:14:18 -04:00
David S. Miller
e6acb38480 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
This is an initial merge in of Eric Biederman's work to start adding
user namespace support to the networking.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-24 18:54:37 -04:00
Pablo Neira Ayuso
20e1db19db netlink: fix possible spoofing from non-root processes
Non-root user-space processes can send Netlink messages to other
processes that are well-known for being subscribed to Netlink
asynchronous notifications. This allows ilegitimate non-root
process to send forged messages to Netlink subscribers.

The userspace process usually verifies the legitimate origin in
two ways:

a) Socket credentials. If UID != 0, then the message comes from
   some ilegitimate process and the message needs to be dropped.

b) Netlink portID. In general, portID == 0 means that the origin
   of the messages comes from the kernel. Thus, discarding any
   message not coming from the kernel.

However, ctnetlink sets the portID in event messages that has
been triggered by some user-space process, eg. conntrack utility.
So other processes subscribed to ctnetlink events, eg. conntrackd,
know that the event was triggered by some user-space action.

Neither of the two ways to discard ilegitimate messages coming
from non-root processes can help for ctnetlink.

This patch adds capability validation in case that dst_pid is set
in netlink_sendmsg(). This approach is aggressive since existing
applications using any Netlink bus to deliver messages between
two user-space processes will break. Note that the exception is
NETLINK_USERSOCK, since it is reserved for netlink-to-netlink
userspace communication.

Still, if anyone wants that his Netlink bus allows netlink-to-netlink
userspace, then they can set NL_NONROOT_SEND. However, by default,
I don't think it makes sense to allow to use NETLINK_ROUTE to
communicate two processes that are sending no matter what information
that is not related to link/neighbouring/routing. They should be using
NETLINK_USERSOCK instead for that.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-24 13:36:09 -04:00
Eric Dumazet
e0e3cea46d af_netlink: force credentials passing [CVE-2012-3520]
Pablo Neira Ayuso discovered that avahi and
potentially NetworkManager accept spoofed Netlink messages because of a
kernel bug.  The kernel passes all-zero SCM_CREDENTIALS ancillary data
to the receiver if the sender did not provide such data, instead of not
including any such data at all or including the correct data from the
peer (as it is the case with AF_UNIX).

This bug was introduced in commit 16e5726269
(af_unix: dont send SCM_CREDENTIALS by default)

This patch forces passing credentials for netlink, as
before the regression.

Another fix would be to not add SCM_CREDENTIALS in
netlink messages if not provided by the sender, but it
might break some programs.

With help from Florian Weimer & Petr Matousek

This issue is designated as CVE-2012-3520

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Petr Matousek <pmatouse@redhat.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-21 14:53:01 -07:00
Eric W. Biederman
3fbc290540 netlink: Make the sending netlink socket availabe in NETLINK_CB
The sending socket of an skb is already available by it's port id
in the NETLINK_CB.  If you want to know more like to examine the
credentials on the sending socket you have to look up the sending
socket by it's port id and all of the needed functions and data
structures are static inside of af_netlink.c.  So do the simple
thing and pass the sending socket to the receivers in the NETLINK_CB.

I intend to use this to get the user namespace of the sending socket
in inet_diag so that I can report uids in the context of the process
who opened the socket, the same way I report uids in the contect
of the process who opens files.

Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-08-14 21:49:49 -07:00
WANG Cong
320f5ea0ce genetlink: define lockdep_genl_is_held() when CONFIG_LOCKDEP
lockdep_is_held() is defined when CONFIG_LOCKDEP, not CONFIG_PROVE_LOCKING.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jesse Gross <jesse@nicira.com>
Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-24 00:01:30 -07:00
Ben Hutchings
2c53040f01 net: Fix (nearly-)kernel-doc comments for various functions
Fix incorrect start markers, wrapped summary lines, missing section
breaks, incorrect separators, and some name mismatches.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10 23:13:45 -07:00
Pablo Neira Ayuso
03292745b0 netlink: add nlk->netlink_bind hook for module auto-loading
This patch adds a hook in the binding path of netlink.

This is used by ctnetlink to allow module autoloading for the case
in which one user executes:

 conntrack -E

So far, this resulted in nfnetlink loaded, but not
nf_conntrack_netlink.

I have received in the past many complains on this behaviour.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-29 16:46:06 -07:00
Pablo Neira Ayuso
a31f2d17b3 netlink: add netlink_kernel_cfg parameter to netlink_kernel_create
This patch adds the following structure:

struct netlink_kernel_cfg {
        unsigned int    groups;
        void            (*input)(struct sk_buff *skb);
        struct mutex    *cb_mutex;
};

That can be passed to netlink_kernel_create to set optional configurations
for netlink kernel sockets.

I've populated this structure by looking for NULL and zero parameters at the
existing code. The remaining parameters that always need to be set are still
left in the original interface.

That includes optional parameters for the netlink socket creation. This allows
easy extensibility of this interface in the future.

This patch also adapts all callers to use this new interface.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-29 16:46:02 -07:00
Neil Horman
e9412c3708 genetlink: Build a generic netlink family module alias
Generic netlink searches for -type- formatted aliases when requesting a module to
fulfill a protocol request (i.e. net-pf-16-proto-16-type-<x>, where x is a type
value).  However generic netlink protocols have no well defined type numbers,
they have string names.  Modify genl_ctrl_getfamily to request an alias in the
format net-pf-16-proto-16-family-<x> instead, where x is a generic string, and
add a macro that builds on the previously added MODULE_ALIAS_NET_PF_PROTO_NAME
macro to allow modules to specifify those generic strings.

Note, l2tp previously hacked together an net-pf-16-proto-16-type-l2tp alias
using the MODULE_ALIAS macro, with these updates we can convert that to use the
PROTO_NAME macro.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: Eric Dumazet <eric.dumazet@gmail.com>
CC: James Chapman <jchapman@katalix.com>
CC: David Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-29 22:33:56 -04:00
Eric Dumazet
bfb253c9b2 af_netlink: drop_monitor/dropwatch friendly
Need to consume_skb() instead of kfree_skb() in netlink_dump() and
netlink_unicast_kernel() to avoid false dropwatch positives.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-24 00:35:14 -04:00
Eric Dumazet
658cb354ed af_netlink: cleanups
netlink_destroy_callback() move to avoid forward reference

CodingStyle cleanups

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-24 00:35:14 -04:00
Eric Dumazet
8460c00f6e netlink: dont drop packet but consume it
When we need to clone skb, we dont drop a packet.
Call consume_skb() to not confuse dropwatch.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-19 14:23:55 -04:00
David S. Miller
06eb4eafbd Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2012-04-10 14:30:45 -04:00
Eric Dumazet
4a7e7c2ad5 netlink: fix races after skb queueing
As soon as an skb is queued into socket receive_queue, another thread
can consume it, so we are not allowed to reference skb anymore, or risk
use after free.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-06 04:21:06 -04:00
David S. Miller
444653f696 genetlink: Stop using NLA_PUT*().
These macros contain a hidden goto, and are thus extremely error
prone and make code hard to audit.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-01 18:43:25 -04:00
Pablo Neira Ayuso
7175c88307 netlink: allow to pass data pointer to netlink_dump_start() callback
This patch allows you to pass a data pointer that can be
accessed from the dump callback.

Netfilter is going to use this patch to provide filtered dumps
to user-space. This is specifically interesting in ctnetlink that
may handle lots of conntrack entries. We can save precious
cycles by skipping the conversion to TLV format of conntrack
entries that are not interesting for user-space.

More specifically, ctnetlink will include one operation to allow
to filter the dumping of conntrack entries by ctmark values.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-26 14:10:44 -05:00
Pablo Neira Ayuso
80d326fab5 netlink: add netlink_dump_control structure for netlink_dump_start()
Davem considers that the argument list of this interface is getting
out of control. This patch tries to address this issue following
his proposal:

struct netlink_dump_control c = { .dump = dump, .done = done, ... };

netlink_dump_start(..., &c);

Suggested by David S. Miller.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-26 14:10:06 -05:00
Denys Vlasenko
a46621a3a8 net: Deinline __nlmsg_put and genlmsg_put. -7k code on i386 defconfig.
text	   data	    bss	    dec	    hex	filename
8455963	 532732	1810804	10799499 a4c98b	vmlinux.o.before
8448899	 532732	1810804	10792435 a4adf3	vmlinux.o

This change also removes commented-out copy of __nlmsg_put
which was last touched in 2005 with "Enable once all users
have been converted" comment on top.

Changes in v2: rediffed against net-next.

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-30 15:22:06 -05:00
Linus Torvalds
c49c41a413 Merge branch 'for-linus' of git://selinuxproject.org/~jmorris/linux-security
* 'for-linus' of git://selinuxproject.org/~jmorris/linux-security:
  capabilities: remove __cap_full_set definition
  security: remove the security_netlink_recv hook as it is equivalent to capable()
  ptrace: do not audit capability check when outputing /proc/pid/stat
  capabilities: remove task_ns_* functions
  capabitlies: ns_capable can use the cap helpers rather than lsm call
  capabilities: style only - move capable below ns_capable
  capabilites: introduce new has_ns_capabilities_noaudit
  capabilities: call has_ns_capability from has_capability
  capabilities: remove all _real_ interfaces
  capabilities: introduce security_capable_noaudit
  capabilities: reverse arguments to security_capable
  capabilities: remove the task from capable LSM hook entirely
  selinux: sparse fix: fix several warnings in the security server cod
  selinux: sparse fix: fix warnings in netlink code
  selinux: sparse fix: eliminate warnings for selinuxfs
  selinux: sparse fix: declare selinux_disable() in security.h
  selinux: sparse fix: move selinux_complete_init
  selinux: sparse fix: make selinux_secmark_refcount static
  SELinux: Fix RCU deref check warning in sel_netport_insert()

Manually fix up a semantic mis-merge wrt security_netlink_recv():

 - the interface was removed in commit fd77846152 ("security: remove
   the security_netlink_recv hook as it is equivalent to capable()")

 - a new user of it appeared in commit a38f7907b9 ("crypto: Add
   userspace configuration API")

causing no automatic merge conflict, but Eric Paris pointed out the
issue.
2012-01-14 18:36:33 -08:00
Eric Paris
fd77846152 security: remove the security_netlink_recv hook as it is equivalent to capable()
Once upon a time netlink was not sync and we had to get the effective
capabilities from the skb that was being received.  Today we instead get
the capabilities from the current task.  This has rendered the entire
purpose of the hook moot as it is now functionally equivalent to the
capable() call.

Signed-off-by: Eric Paris <eparis@redhat.com>
2012-01-05 18:53:01 -05:00
Stephen Hemminger
fa84309533 genetlink: add auto module loading
When testing L2TP support, I discovered that the l2tp module is not autoloaded
as are other netlink interfaces. There is because of lack of hook in genetlink to call
request_module and load the module.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-28 13:48:55 -05:00
David S. Miller
035c4c16be netlink: Undo const marker in netlink_is_kernel().
We can't do this without propagating the const to nlk_sk()
too, otherwise:

net/netlink/af_netlink.c: In function ‘netlink_is_kernel’:
net/netlink/af_netlink.c:103:2: warning: passing argument 1 of ‘nlk_sk’ discards ‘const’ qualifier from pointer target type [enabled by default]
net/netlink/af_netlink.c:96:36: note: expected ‘struct sock *’ but argument is of type ‘const struct sock *’

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-23 17:33:03 -05:00
stephen hemminger
2c64580046 netlink: wake up netlink listeners sooner (v2)
This patch changes it to yield sooner at halfway instead. Still not a cure-all
for listener overrun if listner is slow, but works much reliably.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-22 22:37:19 -05:00
stephen hemminger
b57ef81ff8 netlink: af_netlink cleanup (v2)
Don't inline functions that cover several lines, and do inline
the trivial ones. Also make some arguments const.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-22 22:37:19 -05:00
Pravin B Shelar
86b1309c7e genetlink: Add lockdep_genl_is_held().
Open vSwitch uses genl_mutex locking to protect datapath
data-structures like flow-table, flow-actions. Following patch adds
lockdep_genl_is_held() which is used for rcu annotation to prove
locking.

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
2011-12-03 09:35:07 -08:00
Pravin B Shelar
263ba61d3b genetlink: Add genl_notify()
Open vSwitch uses Generic Netlink interface for communication
between userspace and kernel module. genl_notify() is used
for sending notification back to userspace.

genl_notify() is analogous to rtnl_notify() but uses genl_sock
instead of rtnl.

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
2011-12-03 09:35:05 -08:00
Eric Dumazet
16e5726269 af_unix: dont send SCM_CREDENTIALS by default
Since commit 7361c36c52 (af_unix: Allow credentials to work across
user and pid namespaces) af_unix performance dropped a lot.

This is because we now take a reference on pid and cred in each write(),
and release them in read(), usually done from another process,
eventually from another cpu. This triggers false sharing.

# Events: 154K cycles
#
# Overhead  Command       Shared Object        Symbol
# ........  .......  ..................  .........................
#
    10.40%  hackbench  [kernel.kallsyms]   [k] put_pid
     8.60%  hackbench  [kernel.kallsyms]   [k] unix_stream_recvmsg
     7.87%  hackbench  [kernel.kallsyms]   [k] unix_stream_sendmsg
     6.11%  hackbench  [kernel.kallsyms]   [k] do_raw_spin_lock
     4.95%  hackbench  [kernel.kallsyms]   [k] unix_scm_to_skb
     4.87%  hackbench  [kernel.kallsyms]   [k] pid_nr_ns
     4.34%  hackbench  [kernel.kallsyms]   [k] cred_to_ucred
     2.39%  hackbench  [kernel.kallsyms]   [k] unix_destruct_scm
     2.24%  hackbench  [kernel.kallsyms]   [k] sub_preempt_count
     1.75%  hackbench  [kernel.kallsyms]   [k] fget_light
     1.51%  hackbench  [kernel.kallsyms]   [k]
__mutex_lock_interruptible_slowpath
     1.42%  hackbench  [kernel.kallsyms]   [k] sock_alloc_send_pskb

This patch includes SCM_CREDENTIALS information in a af_unix message/skb
only if requested by the sender, [man 7 unix for details how to include
ancillary data using sendmsg() system call]

Note: This might break buggy applications that expected SCM_CREDENTIAL
from an unaware write() system call, and receiver not using SO_PASSCRED
socket option.

If SOCK_PASSCRED is set on source or destination socket, we still
include credentials for mere write() syscalls.

Performance boost in hackbench : more than 50% gain on a 16 thread
machine (2 quad-core cpus, 2 threads per core)

hackbench 20 thread 2000

4.228 sec instead of 9.102 sec

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-28 13:29:50 -04:00
Eric Dumazet
33d480ce6d net: cleanup some rcu_dereference_raw
RCU api had been completed and rcu_access_pointer() or
rcu_dereference_protected() are better than generic
rcu_dereference_raw()

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-12 02:55:28 -07:00
John W. Linville
36099365c7 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem
Conflicts:
	drivers/net/wireless/rtlwifi/pci.c
	include/linux/netlink.h
2011-06-24 15:25:51 -04:00
Johannes Berg
670dc2833d netlink: advertise incomplete dumps
Consider the following situation:
 * a dump that would show 8 entries, four in the first
   round, and four in the second
 * between the first and second rounds, 6 entries are
   removed
 * now the second round will not show any entry, and
   even if there is a sequence/generation counter the
   application will not know

To solve this problem, add a new flag NLM_F_DUMP_INTR
to the netlink header that indicates the dump wasn't
consistent, this flag can also be set on the MSG_DONE
message that terminates the dump, and as such above
situation can be detected.

To achieve this, add a sequence counter to the netlink
callback struct. Of course, netlink code still needs
to use this new functionality. The correct way to do
that is to always set cb->seq when a dumpit callback
is invoked and call nl_dump_check_consistent() for
each new message. The core code will also call this
function for the final MSG_DONE message.

To make it usable with generic netlink, a new function
genlmsg_nlhdr() is needed to obtain the netlink header
from the genetlink user header.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22 16:09:45 -04:00
Dan Carpenter
c63d6ea306 rtnetlink: unlock on error path in netlink_dump()
In c7ac8679be "rtnetlink: Compute and store minimum ifinfo dump
size", we moved the allocation under the lock so we need to unlock
on error path.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David S. Miller <davem@conan.davemloft.net>
2011-06-16 23:51:35 -04:00
Greg Rose
c7ac8679be rtnetlink: Compute and store minimum ifinfo dump size
The message size allocated for rtnl ifinfo dumps was limited to
a single page.  This is not enough for additional interface info
available with devices that support SR-IOV and caused a bug in
which VF info would not be displayed if more than approximately
40 VFs were created per interface.

Implement a new function pointer for the rtnl_register service that will
calculate the amount of data required for the ifinfo dump and allocate
enough data to satisfy the request.

Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-09 20:38:07 -07:00
Dan Rosenberg
71338aa7d0 net: convert %p usage to %pK
The %pK format specifier is designed to hide exposed kernel pointers,
specifically via /proc interfaces.  Exposing these pointers provides an
easy target for kernel write vulnerabilities, since they reveal the
locations of writable structures containing easily triggerable function
pointers.  The behavior of %pK depends on the kptr_restrict sysctl.

If kptr_restrict is set to 0, no deviation from the standard %p behavior
occurs.  If kptr_restrict is set to 1, the default, if the current user
(intended to be a reader via seq_printf(), etc.) does not have CAP_SYSLOG
(currently in the LSM tree), kernel pointers using %pK are printed as 0's.
 If kptr_restrict is set to 2, kernel pointers using %pK are printed as
0's regardless of privileges.  Replacing with 0's was chosen over the
default "(null)", which cannot be parsed by userland %p, which expects
"(nil)".

The supporting code for kptr_restrict and %pK are currently in the -mm
tree.  This patch converts users of %p in net/ to %pK.  Cases of printing
pointers to the syslog are not covered, since this would eliminate useful
information for postmortem debugging and the reading of the syslog is
already optionally protected by the dmesg_restrict sysctl.

Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com>
Cc: James Morris <jmorris@namei.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Thomas Graf <tgraf@infradead.org>
Cc: Eugene Teo <eugeneteo@kernel.org>
Cc: Kees Cook <kees.cook@canonical.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David S. Miller <davem@davemloft.net>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Eric Paris <eparis@parisplace.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-24 01:13:12 -04:00
Lai Jiangshan
37b6b935e9 net,rcu: convert call_rcu(listeners_free_rcu) to kfree_rcu()
The rcu callback listeners_free_rcu() just calls a kfree(),
so we use kfree_rcu() instead of the call_rcu(listeners_free_rcu).

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-05-07 22:50:51 -07:00
David S. Miller
0a0e9ae1bd Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	drivers/net/bnx2x/bnx2x.h
2011-03-03 21:27:42 -08:00
Patrick McHardy
01a16b21d6 netlink: kill eff_cap from struct netlink_skb_parms
Netlink message processing in the kernel is synchronous these days,
capabilities can be checked directly in security_netlink_recv() from
the current process.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Reviewed-by: James Morris <jmorris@namei.org>
[chrisw: update to include pohmelfs and uvesafb]
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-03 13:32:07 -08:00
Patrick McHardy
c53fa1ed92 netlink: kill loginuid/sessionid/sid members from struct netlink_skb_parms
Netlink message processing in the kernel is synchronous these days, the
session information can be collected when needed.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-03 10:55:40 -08:00
Andrey Vagin
b44d211e16 netlink: handle errors from netlink_dump()
netlink_dump() may failed, but nobody handle its error.
It generates output data, when a previous portion has been returned to
user space. This mechanism works when all data isn't go in skb. If we
enter in netlink_recvmsg() and skb is absent in the recv queue, the
netlink_dump() will not been executed. So if netlink_dump() is failed
one time, the new data never appear and the reader will sleep forever.

netlink_dump() is called from two places:

1. from netlink_sendmsg->...->netlink_dump_start().
   In this place we can report error directly and it will be returned
   by sendmsg().

2. from netlink_recvmsg
   There we can't report error directly, because we have a portion of
   valid output data and call netlink_dump() for prepare the next portion.
   If netlink_dump() is failed, the socket will be mark as error and the
   next recvmsg will be failed.

Signed-off-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-28 12:18:12 -08:00
David S. Miller
b8f3ab4290 Revert "netlink: test for all flags of the NLM_F_DUMP composite"
This reverts commit 0ab03c2b14.

It breaks several things including the avahi daemon.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-19 13:34:20 -08:00
Jan Engelhardt
0ab03c2b14 netlink: test for all flags of the NLM_F_DUMP composite
Due to NLM_F_DUMP is composed of two bits, NLM_F_ROOT | NLM_F_MATCH,
when doing "if (x & NLM_F_DUMP)", it tests for _either_ of the bits
being set. Because NLM_F_MATCH's value overlaps with NLM_F_EXCL,
non-dump requests with NLM_F_EXCL set are mistaken as dump requests.

Substitute the condition to test for _all_ bits being set.

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09 16:25:03 -08:00
Eric Dumazet
5c398dc8f5 netlink: fix netlink_change_ngroups()
commit 6c04bb18dd (netlink: use call_rcu for netlink_change_ngroups)
used a somewhat convoluted and racy way to perform call_rcu().

The old block of memory is freed after a grace period, but the rcu_head
used to track it is located in new block.

This can clash if we call two times or more netlink_change_ngroups(),
and a block is freed before another. call_rcu() called on different cpus
makes no guarantee in order of callbacks.

Fix this using a more standard way of handling this : Each block of
memory contains its own rcu_head, so that no 'use after free' can
happens.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Johannes Berg <johannes@sipsolutions.net>
CC: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-24 16:25:39 -07:00
John W. Linville
e9a68707d7 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem
Conflicts:
	Documentation/feature-removal-schedule.txt
	drivers/net/wireless/ipw2x00/ipw2200.c
2010-10-08 15:39:28 -04:00