Commit Graph

169 Commits

Author SHA1 Message Date
Sébastien Barré
1dced6a854 ipv4: Restore accept_local behaviour in fib_validate_source()
Commit 7a9bc9b81a ("ipv4: Elide fib_validate_source() completely when possible.")
introduced a short-circuit to avoid calling fib_validate_source when not
needed. That change took rp_filter into account, but not accept_local.
This resulted in a change of behaviour: with rp_filter and accept_local
off, incoming packets with a local address in the source field should be
dropped.

Here is how to reproduce the change pre/post 7a9bc9b81a commit:
-configure the same IPv4 address on hosts A and B.
-try to send an ARP request from B to A.
-The ARP request will be dropped before that commit, but accepted and answered
after that commit.

This adds a check for ACCEPT_LOCAL, to maintain full
fib validation in case it is 0. We also leave __fib_validate_source() earlier
when possible, based on the same check as fib_validate_source(), once the
accept_local stuff is verified.

Cc: Gregory Detal <gregory.detal@uclouvain.be>
Cc: Christoph Paasch <christoph.paasch@uclouvain.be>
Cc: Hannes Frederic Sowa <hannes@redhat.com>
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Sébastien Barré <sebastien.barre@uclouvain.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-22 12:23:10 -07:00
Cong Wang
6a662719c9 ipv4, fib: pass LOOPBACK_IFINDEX instead of 0 to flowi4_iif
As suggested by Julian:

	Simply, flowi4_iif must not contain 0, it does not
	look logical to ignore all ip rules with specified iif.

because in fib_rule_match() we do:

        if (rule->iifindex && (rule->iifindex != fl->flowi_iif))
                goto out;

flowi4_iif should be LOOPBACK_IFINDEX by default.

We need to move LOOPBACK_IFINDEX to include/net/flow.h:

1) It is mostly used by flowi_iif

2) Fix the following compile error if we use it in flow.h
by the patches latter:

In file included from include/linux/netfilter.h:277:0,
                 from include/net/netns/netfilter.h:5,
                 from include/net/net_namespace.h:21,
                 from include/linux/netdevice.h:43,
                 from include/linux/icmpv6.h:12,
                 from include/linux/ipv6.h:61,
                 from include/net/ipv6.h:16,
                 from include/linux/sunrpc/clnt.h:27,
                 from include/linux/nfs_fs.h:30,
                 from init/do_mounts.c:32:
include/net/flow.h: In function ‘flowi4_init_output’:
include/net/flow.h:84:32: error: ‘LOOPBACK_IFINDEX’ undeclared (first use in this function)

Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Julian Anastasov <ja@ssi.bg>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Cong Wang <cwang@twopensource.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-16 15:05:11 -04:00
Li RongQing
0b8c7f6f2a ipv4: remove ip_rt_dump from route.c
ip_rt_dump do nothing after IPv4 route caches removal, so we can remove it.

Signed-off-by: Li RongQing <roy.qing.li@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-24 12:45:01 -04:00
Oliver Hartkopp
a0065f266a fib_frontend: fix possible NULL pointer dereference
The two commits 0115e8e30d (net: remove delay at device dismantle) and
748e2d9396 (net: reinstate rtnl in call_netdevice_notifiers()) silently
removed a NULL pointer check for in_dev since Linux 3.7.

This patch re-introduces this check as it causes crashing the kernel when
setting small mtu values on non-ip capable netdevices.

Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-24 15:51:26 -08:00
baker.zhang
77dfca7e45 fib_trie: remove duplicated rcu lock
fib_table_lookup has included the rcu lock protection.

Signed-off-by: baker.zhang <baker.kernel@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-18 13:53:59 -04:00
Pablo Neira
3a36515f72 netlink: fix splat in skb_clone with large messages
Since (c05cdb1 netlink: allow large data transfers from user-space),
netlink splats if it invokes skb_clone on large netlink skbs since:

* skb_shared_info was not correctly initialized.
* skb->destructor is not set in the cloned skb.

This was spotted by trinity:

[  894.990671] BUG: unable to handle kernel paging request at ffffc9000047b001
[  894.991034] IP: [<ffffffff81a212c4>] skb_clone+0x24/0xc0
[...]
[  894.991034] Call Trace:
[  894.991034]  [<ffffffff81ad299a>] nl_fib_input+0x6a/0x240
[  894.991034]  [<ffffffff81c3b7e6>] ? _raw_read_unlock+0x26/0x40
[  894.991034]  [<ffffffff81a5f189>] netlink_unicast+0x169/0x1e0
[  894.991034]  [<ffffffff81a601e1>] netlink_sendmsg+0x251/0x3d0

Fix it by:

1) introducing a new netlink_skb_clone function that is used in nl_fib_input,
   that sets our special skb->destructor in the cloned skb. Moreover, handle
   the release of the large cloned skb head area in the destructor path.

2) not allowing large skbuffs in the netlink broadcast path. I cannot find
   any reasonable use of the large data transfer using netlink in that path,
   moreover this helps to skip extra skb_clone handling.

I found two more netlink clients that are cloning the skbs, but they are
not in the sendmsg path. Therefore, the sole client cloning that I found
seems to be the fib frontend.

Thanks to Eric Dumazet for helping to address this issue.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-27 22:44:16 -07:00
Jiri Pirko
351638e7de net: pass info struct via netdevice notifier
So far, only net_device * could be passed along with netdevice notifier
event. This patch provides a possibility to pass custom structure
able to provide info that event listener needs to know.

Signed-off-by: Jiri Pirko <jiri@resnulli.us>

v2->v3: fix typo on simeth
	shortened dev_getter
	shortened notifier_info struct name
v1->v2: fix notifier_call parameter in call_netdevice_notifier()
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-28 13:11:01 -07:00
Hong zhi guo
573ce260b3 net-next: replace obsolete NLMSG_* with type safe nlmsg_*
Signed-off-by: Hong Zhiguo <honkiko@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-28 14:25:25 -04:00
Thomas Graf
661d2967b3 rtnetlink: Remove passing of attributes into rtnl_doit functions
With decnet converted, we can finally get rid of rta_buf and its
computations around it. It also gets rid of the minimal header
length verification since all message handlers do that explicitly
anyway.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-22 10:31:16 -04:00
Sasha Levin
b67bfe0d42 hlist: drop the node parameter from iterators
I'm not sure why, but the hlist for each entry iterators were conceived

        list_for_each_entry(pos, head, member)

The hlist ones were greedy and wanted an extra parameter:

        hlist_for_each_entry(tpos, pos, head, member)

Why did they need an extra pos parameter? I'm not quite sure. Not only
they don't really need it, it also prevents the iterator from looking
exactly like the list iterator, which is unfortunate.

Besides the semantic patch, there was some manual work required:

 - Fix up the actual hlist iterators in linux/list.h
 - Fix up the declaration of other iterators based on the hlist ones.
 - A very small amount of places were using the 'node' parameter, this
 was modified to use 'obj->member' instead.
 - Coccinelle didn't handle the hlist_for_each_entry_safe iterator
 properly, so those had to be fixed up manually.

The semantic patch which is mostly the work of Peter Senna Tschudin is here:

@@
iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host;

type T;
expression a,c,d,e;
identifier b;
statement S;
@@

-T b;
    <+... when != b
(
hlist_for_each_entry(a,
- b,
c, d) S
|
hlist_for_each_entry_continue(a,
- b,
c) S
|
hlist_for_each_entry_from(a,
- b,
c) S
|
hlist_for_each_entry_rcu(a,
- b,
c, d) S
|
hlist_for_each_entry_rcu_bh(a,
- b,
c, d) S
|
hlist_for_each_entry_continue_rcu_bh(a,
- b,
c) S
|
for_each_busy_worker(a, c,
- b,
d) S
|
ax25_uid_for_each(a,
- b,
c) S
|
ax25_for_each(a,
- b,
c) S
|
inet_bind_bucket_for_each(a,
- b,
c) S
|
sctp_for_each_hentry(a,
- b,
c) S
|
sk_for_each(a,
- b,
c) S
|
sk_for_each_rcu(a,
- b,
c) S
|
sk_for_each_from
-(a, b)
+(a)
S
+ sk_for_each_from(a) S
|
sk_for_each_safe(a,
- b,
c, d) S
|
sk_for_each_bound(a,
- b,
c) S
|
hlist_for_each_entry_safe(a,
- b,
c, d, e) S
|
hlist_for_each_entry_continue_rcu(a,
- b,
c) S
|
nr_neigh_for_each(a,
- b,
c) S
|
nr_neigh_for_each_safe(a,
- b,
c, d) S
|
nr_node_for_each(a,
- b,
c) S
|
nr_node_for_each_safe(a,
- b,
c, d) S
|
- for_each_gfn_sp(a, c, d, b) S
+ for_each_gfn_sp(a, c, d) S
|
- for_each_gfn_indirect_valid_sp(a, c, d, b) S
+ for_each_gfn_indirect_valid_sp(a, c, d) S
|
for_each_host(a,
- b,
c) S
|
for_each_host_safe(a,
- b,
c, d) S
|
for_each_mesh_entry(a,
- b,
c, d) S
)
    ...+>

[akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c]
[akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c]
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix warnings]
[akpm@linux-foudnation.org: redo intrusive kvm changes]
Tested-by: Peter Senna Tschudin <peter.senna@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 19:10:24 -08:00
Rami Rosen
28a28283f8 ipv4: fib: fix a comment.
In fib_frontend.c, there is a confusing comment; NETLINK_CB(skb).portid does not
refer to a pid of sending process, but rather to a netlink portid.

Signed-off-by: Rami Rosen <ramirose@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-11 15:58:08 -08:00
Eric W. Biederman
b51642f6d7 net: Enable a userns root rtnl calls that are safe for unprivilged users
- Only allow moving network devices to network namespaces you have
  CAP_NET_ADMIN privileges over.

- Enable creating/deleting/modifying interfaces
- Enable adding/deleting addresses
- Enable adding/setting/deleting neighbour entries
- Enable adding/removing routes
- Enable adding/removing fib rules
- Enable setting the forwarding state
- Enable adding/removing ipv6 address labels
- Enable setting bridge parameter

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-18 20:33:36 -05:00
Eric W. Biederman
52e804c6df net: Allow userns root to control ipv4
Allow an unpriviled user who has created a user namespace, and then
created a network namespace to effectively use the new network
namespace, by reducing capable(CAP_NET_ADMIN) and
capable(CAP_NET_RAW) calls to be ns_capable(net->user_ns,
CAP_NET_ADMIN), or capable(net->user_ns, CAP_NET_RAW) calls.

Settings that merely control a single network device are allowed.
Either the network device is a logical network device where
restrictions make no difference or the network device is hardware NIC
that has been explicity moved from the initial network namespace.

In general policy and network stack state changes are allowed
while resource control is left unchanged.

Allow creating raw sockets.
Allow the SIOCSARP ioctl to control the arp cache.
Allow the SIOCSIFFLAG ioctl to allow setting network device flags.
Allow the SIOCSIFADDR ioctl to allow setting a netdevice ipv4 address.
Allow the SIOCSIFBRDADDR ioctl to allow setting a netdevice ipv4 broadcast address.
Allow the SIOCSIFDSTADDR ioctl to allow setting a netdevice ipv4 destination address.
Allow the SIOCSIFNETMASK ioctl to allow setting a netdevice ipv4 netmask.
Allow the SIOCADDRT and SIOCDELRT ioctls to allow adding and deleting ipv4 routes.

Allow the SIOCADDTUNNEL, SIOCCHGTUNNEL and SIOCDELTUNNEL ioctls for
adding, changing and deleting gre tunnels.

Allow the SIOCADDTUNNEL, SIOCCHGTUNNEL and SIOCDELTUNNEL ioctls for
adding, changing and deleting ipip tunnels.

Allow the SIOCADDTUNNEL, SIOCCHGTUNNEL and SIOCDELTUNNEL ioctls for
adding, changing and deleting ipsec virtual tunnel interfaces.

Allow setting the MRT_INIT, MRT_DONE, MRT_ADD_VIF, MRT_DEL_VIF, MRT_ADD_MFC,
MRT_DEL_MFC, MRT_ASSERT, MRT_PIM, MRT_TABLE socket options on multicast routing
sockets.

Allow setting and receiving IPOPT_CIPSO, IP_OPT_SEC, IP_OPT_SID and
arbitrary ip options.

Allow setting IP_SEC_POLICY/IP_XFRM_POLICY ipv4 socket option.
Allow setting the IP_TRANSPARENT ipv4 socket option.
Allow setting the TCP_REPAIR socket option.
Allow setting the TCP_CONGESTION socket option.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-18 20:32:45 -05:00
Eric W. Biederman
dfc47ef863 net: Push capable(CAP_NET_ADMIN) into the rtnl methods
- In rtnetlink_rcv_msg convert the capable(CAP_NET_ADMIN) check
  to ns_capable(net->user-ns, CAP_NET_ADMIN).  Allowing unprivileged
  users to make netlink calls to modify their local network
  namespace.

- In the rtnetlink doit methods add capable(CAP_NET_ADMIN) so
  that calls that are not safe for unprivileged users are still
  protected.

Later patches will remove the extra capable calls from methods
that are safe for unprivilged users.

Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-18 20:32:44 -05:00
Julian Anastasov
e81da0e113 ipv4: fix sending of redirects
After "Cache input routes in fib_info nexthops" (commit
d2d68ba9fe) and "Elide fib_validate_source() completely when possible"
(commit 7a9bc9b81a) we can not send ICMP redirects. It seems we
should not cache the RTCF_DOREDIRECT flag in nh_rth_input because
the same fib_info can be used for traffic that is not redirected,
eg. from other input devices or from sources that are not in same subnet.

	As result, we have to disable the caching of RTCF_DOREDIRECT
flag and to force source validation for the case when forwarding
traffic to the input device. If traffic comes from directly connected
source we allow redirection as it was done before both changes.

	Avoid setting RTCF_DOREDIRECT if IN_DEV_TX_REDIRECTS
is disabled, this can avoid source address validation and to
help caching the routes.

	After the change "Adjust semantics of rt->rt_gateway"
(commit f8126f1d51) we should make sure our ICMP_REDIR_HOST messages
contain daddr instead of 0.0.0.0 when target is directly connected.

Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-08 17:42:35 -04:00
Eric W. Biederman
15e473046c netlink: Rename pid to portid to avoid confusion
It is a frequent mistake to confuse the netlink port identifier with a
process identifier.  Try to reduce this confusion by renaming fields
that hold port identifiers portid instead of pid.

I have carefully avoided changing the structures exported to
userspace to avoid changing the userspace API.

I have successfully built an allyesconfig kernel with this change.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-10 15:30:41 -04:00
Pablo Neira Ayuso
9f00d9776b netlink: hide struct module parameter in netlink_kernel_create
This patch defines netlink_kernel_create as a wrapper function of
__netlink_kernel_create to hide the struct module *me parameter
(which seems to be THIS_MODULE in all existing netlink subsystems).

Suggested by David S. Miller.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-08 18:46:30 -04:00
Nicolas Dichtel
4ccfe6d410 ipv4/route: arg delay is useless in rt_cache_flush()
Since route cache deletion (89aef8921b), delay is no
more used. Remove it.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-07 14:44:08 -04:00
Eric Dumazet
748e2d9396 net: reinstate rtnl in call_netdevice_notifiers()
Eric Biederman pointed out that not holding RTNL while calling
call_netdevice_notifiers() was racy.

This patch is a direct transcription his feedback
against commit 0115e8e30d (net: remove delay at device dismantle)

Thanks Eric !

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Tom Herbert <therbert@google.com>
Cc: Mahesh Bandewar <maheshb@google.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Gao feng <gaofeng@cn.fujitsu.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-23 09:24:42 -07:00
Eric Dumazet
0115e8e30d net: remove delay at device dismantle
I noticed extra one second delay in device dismantle, tracked down to
a call to dst_dev_event() while some call_rcu() are still in RCU queues.

These call_rcu() were posted by rt_free(struct rtable *rt) calls.

We then wait a little (but one second) in netdev_wait_allrefs() before
kicking again NETDEV_UNREGISTER.

As the call_rcu() are now completed, dst_dev_event() can do the needed
device swap on busy dst.

To solve this problem, add a new NETDEV_UNREGISTER_FINAL, called
after a rcu_barrier(), but outside of RTNL lock.

Use NETDEV_UNREGISTER_FINAL with care !

Change dst_dev_event() handler to react to NETDEV_UNREGISTER_FINAL

Also remove NETDEV_UNREGISTER_BATCH, as its not used anymore after
IP cache removal.

With help from Gao feng

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Tom Herbert <therbert@google.com>
Cc: Mahesh Bandewar <maheshb@google.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-22 21:50:36 -07:00
Pavel Emelyanov
1fb9489bf1 net: Loopback ifindex is constant now
As pointed out, there are places, that access net->loopback_dev->ifindex
and after ifindex generation is made per-net this value becomes constant
equals 1. So go ahead and introduce the LOOPBACK_IFINDEX constant and use
it where appropriate.

Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-09 16:18:07 -07:00
David S. Miller
caacf05e5a ipv4: Properly purge netdev references on uncached routes.
When a device is unregistered, we have to purge all of the
references to it that may exist in the entire system.

If a route is uncached, we currently have no way of accomplishing
this.

So create a global list that is scanned when a network device goes
down.  This mirrors the logic in net/core/dst.c's dst_ifdown().

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-31 15:06:50 -07:00
Lin Ming
8fe5cb873b ipv4: Remove redundant assignment
It is redundant to set no_addr and accept_local to 0 and then set them
with other values just after that.

Signed-off-by: Lin Ming <mlin@ss.pku.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-23 13:00:54 -07:00
David S. Miller
89aef8921b ipv4: Delete routing cache.
The ipv4 routing cache is non-deterministic, performance wise, and is
subject to reasonably easy to launch denial of service attacks.

The routing cache works great for well behaved traffic, and the world
was a much friendlier place when the tradeoffs that led to the routing
cache's design were considered.

What it boils down to is that the performance of the routing cache is
a product of the traffic patterns seen by a system rather than being a
product of the contents of the routing tables.  The former of which is
controllable by external entitites.

Even for "well behaved" legitimate traffic, high volume sites can see
hit rates in the routing cache of only ~%10.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-20 13:30:27 -07:00
Julian Anastasov
0cc535a299 ipv4: fix address selection in fib_compute_spec_dst
ip_options_compile can be called for forwarded packets,
make sure the specific-destionation address is a local one as
specified in RFC 1812, 4.2.2.2 Addresses in Options

Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-19 08:30:49 -07:00
David S. Miller
85b91b0339 ipv4: Don't store a rule pointer in fib_result.
We only use it to fetch the rule's tclassid, so just store the
tclassid there instead.

This also decreases the size of fib_result by a full 8 bytes on
64-bit.  On 32-bits it's a wash.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-13 08:21:29 -07:00
David S. Miller
f4530fa574 ipv4: Avoid overhead when no custom FIB rules are installed.
If the user hasn't actually installed any custom rules, or fiddled
with the default ones, don't go through the whole FIB rules layer.

It's just pure overhead.

Instead do what we do with CONFIG_IP_MULTIPLE_TABLES disabled, check
the individual tables by hand, one by one.

Also, move fib_num_tclassid_users into the ipv4 network namespace.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-05 22:13:13 -07:00
Pablo Neira Ayuso
a31f2d17b3 netlink: add netlink_kernel_cfg parameter to netlink_kernel_create
This patch adds the following structure:

struct netlink_kernel_cfg {
        unsigned int    groups;
        void            (*input)(struct sk_buff *skb);
        struct mutex    *cb_mutex;
};

That can be passed to netlink_kernel_create to set optional configurations
for netlink kernel sockets.

I've populated this structure by looking for NULL and zero parameters at the
existing code. The remaining parameters that always need to be set are still
left in the original interface.

That includes optional parameters for the netlink socket creation. This allows
easy extensibility of this interface in the future.

This patch also adapts all callers to use this new interface.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-29 16:46:02 -07:00
David S. Miller
7a9bc9b81a ipv4: Elide fib_validate_source() completely when possible.
If rpfilter is off (or the SKB has an IPSEC path) and there are not
tclassid users, we don't have to do anything at all when
fib_validate_source() is invoked besides setting the itag to zero.

We monitor tclassid uses with a counter (modified only under RTNL and
marked __read_mostly) and we protect the fib_validate_source() real
work with a test against this counter and whether rpfilter is to be
done.

Having a way to know whether we need no tclassid processing or not
also opens the door for future optimized rpfilter algorithms that do
not perform full FIB lookups.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-29 01:36:36 -07:00
David S. Miller
9e56e3800e ipv4: Adjust in_dev handling in fib_validate_source()
Checking for in_dev being NULL is pointless.

In fact, all of our callers have in_dev precomputed already,
so just pass it in and remove the NULL checking.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-28 18:54:02 -07:00
David S. Miller
a207a4b2e8 ipv4: Fix bugs in fib_compute_spec_dst().
Based upon feedback from Julian Anastasov.

1) Use route flags to determine multicast/broadcast, not the
   packet flags.

2) Leave saddr unspecified in flow key.

3) Adjust how we invoke inet_select_addr().  Pass ip_hdr(skb)->saddr as
   second arg, and if it was zeronet use link scope.

4) Use loopback as input interface in flow key.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-28 18:33:58 -07:00
David S. Miller
41347dcdd8 ipv4: Kill rt->rt_spec_dst, no longer used.
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-28 04:05:27 -07:00
David S. Miller
35ebf65e85 ipv4: Create and use fib_compute_spec_dst() helper.
The specific destination is the host we direct unicast replies to.
Usually this is the original packet source address, but if we are
responding to a multicast or broadcast packet we have to use something
different.

Specifically we must use the source address we would use if we were to
send a packet to the unicast source of the original packet.

The routing cache precomputes this value, but we want to remove that
precomputation because it creates a hard dependency on the expensive
rpfilter source address validation which we'd like to make cheaper.

There are only three places where this matters:

1) ICMP replies.

2) pktinfo CMSG

3) IP options

Now there will be no real users of rt->rt_spec_dst and we can simply
remove it altogether.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-28 03:59:11 -07:00
Eric Dumazet
95c9617472 net: cleanup unsigned to unsigned int
Use of "unsigned int" is preferred to bare "unsigned" in net tree.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15 12:44:40 -04:00
David Howells
9ffc93f203 Remove all #inclusions of asm/system.h
Remove all #inclusions of asm/system.h preparatory to splitting and killing
it.  Performed with the following command:

perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *`

Signed-off-by: David Howells <dhowells@redhat.com>
2012-03-28 18:30:03 +01:00
Joe Perches
058bd4d2a4 net: Convert printks to pr_<level>
Use a more current kernel messaging style.

Convert a printk block to print_hex_dump.
Coalesce formats, align arguments.
Use %s, __func__ instead of embedding function names.

Some messages that were prefixed with <foo>_close are
now prefixed with <foo>_fini.  Some ah4 and esp messages
are now not prefixed with "ip ".

The intent of this patch is to later add something like
  #define pr_fmt(fmt) "IPv4: " fmt.
to standardize the output messages.

Text size is trivially reduced. (x86-32 allyesconfig)

$ size net/ipv4/built-in.o*
   text	   data	    bss	    dec	    hex	filename
 887888	  31558	 249696	1169142	 11d6f6	net/ipv4/built-in.o.new
 887934	  31558	 249800	1169292	 11d78c	net/ipv4/built-in.o.old

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-11 23:42:51 -07:00
Greg Rose
c7ac8679be rtnetlink: Compute and store minimum ifinfo dump size
The message size allocated for rtnl ifinfo dumps was limited to
a single page.  This is not enough for additional interface info
available with devices that support SR-IOV and caused a bug in
which VF info would not be displayed if more than approximately
40 VFs were created per interface.

Implement a new function pointer for the rtnl_register service that will
calculate the amount of data required for the ifinfo dump and allocate
enough data to satisfy the request.

Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-09 20:38:07 -07:00
Michael Smith
990078afbf Disable rp_filter for IPsec packets
The reverse path filter interferes with IPsec subnet-to-subnet tunnels,
especially when the link to the IPsec peer is on an interface other than
the one hosting the default route.

With dynamic routing, where the peer might be reachable through eth0
today and eth1 tomorrow, it's difficult to keep rp_filter enabled unless
fake routes to the remote subnets are configured on the interface
currently used to reach the peer.

IPsec provides a much stronger anti-spoofing policy than rp_filter, so
this patch disables the rp_filter for packets with a security path.

Signed-off-by: Michael Smith <msmith@cbnco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-10 18:50:59 -07:00
Michael Smith
5c04c819a2 fib_validate_source(): pass sk_buff instead of mark
This makes sk_buff available for other use in fib_validate_source().

Signed-off-by: Michael Smith <msmith@cbnco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-10 18:50:59 -07:00
Eric Dumazet
e2666f8495 fib: add rtnl locking in ip_fib_net_exit
Daniel J Blueman reported a lockdep splat in trie_firstleaf(), caused by
RTNL being not locked before a call to fib_table_flush()

Reported-by: Daniel J Blueman <daniel.blueman@gmail.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-30 16:57:46 -07:00
David S. Miller
436c3b66ec ipv4: Invalidate nexthop cache nh_saddr more correctly.
Any operation that:

1) Brings up an interface
2) Adds an IP address to an interface
3) Deletes an IP address from an interface

can potentially invalidate the nh_saddr value, requiring
it to be recomputed.

Perform the recomputation lazily using a generation ID.

Reported-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-24 17:42:21 -07:00
Julian Anastasov
e6abbaa272 ipv4: fix route deletion for IPs on many subnets
Alex Sidorenko reported for problems with local
routes left after IP addresses are deleted. It happens
when same IPs are used in more than one subnet for the
device.

	Fix fib_del_ifaddr to restrict the checks for duplicate
local and broadcast addresses only to the IFAs that use
our primary IFA or another primary IFA with same address.
And we expect the prefsrc to be matched when the routes
are deleted because it is possible they to differ only by
prefsrc. This patch prevents local and broadcast routes
to be leaked until their primary IP is deleted finally
from the box.

	As the secondary address promotion needs to delete
the routes for all secondaries that used the old primary IFA,
add option to ignore these secondaries from the checks and
to assume they are already deleted, so that we can safely
delete the route while these IFAs are still on the device list.

Reported-by: Alex Sidorenko <alexandre.sidorenko@hp.com>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-22 01:06:32 -07:00
David S. Miller
9ade22861f ipv4: Use flowi4 in FIB layer.
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12 15:08:49 -08:00
David S. Miller
22bd5b9b13 ipv4: Pass ipv4 flow objects into fib_lookup() paths.
To start doing these conversions, we need to add some temporary
flow4_* macros which will eventually go away when all the protocol
code paths are changed to work on AF specific flowi objects.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12 15:08:47 -08:00
David S. Miller
1d28f42c1b net: Put flowi_* prefix on AF independent members of struct flowi
I intend to turn struct flowi into a union of AF specific flowi
structs.  There will be a common structure that each variant includes
first, much like struct sock_common.

This is the first step to move in that direction.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12 15:08:44 -08:00
David S. Miller
cc7e17ea04 ipv4: Optimize flow initialization in fib_validate_source().
Like in commit 44713b67db
("ipv4: Optimize flow initialization in output route lookup."
we can optimize the on-stack flow setup to only initialize
the members which are actually used.

Otherwise we bzero the entire structure, then initialize
explicitly the first half of it.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-09 20:57:50 -08:00
David S. Miller
1fc050a134 ipv4: Cache source address in nexthop entries.
When doing output route lookups, we have to select the source address
if the user has not specified an explicit one.

First, if the route has an explicit preferred source address
specified, then we use that.

Otherwise we search the route's outgoing interface for a suitable
address.

This search can be precomputed and cached at route insertion time.

The only missing part is that we have to refresh this precomputed
value any time addresses are added or removed from the interface, and
this is accomplished by fib_update_nh_saddrs().

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-07 20:54:48 -08:00
David S. Miller
9435eb1cf0 ipv4: Implement __ip_dev_find using new interface address hash.
Much quicker than going through the FIB tables.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-18 12:43:09 -08:00
David S. Miller
5348ba85a0 ipv4: Update some fib_hash centric interface names.
fib_hash_init() --> fib_trie_init()
fib_hash_table() --> fib_trie_table()

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-01 15:35:25 -08:00
David S. Miller
0c838ff1ad ipv4: Consolidate all default route selection implementations.
Both fib_trie and fib_hash have a local implementation of
fib_table_select_default().  This is completely unnecessary
code duplication.

Since we now remember the fib_table and the head of the fib
alias list of the default route, we can implement one single
generic version of this routine.

Looking at the fib_hash implementation you may get the impression
that it's possible for there to be multiple top-level routes in
the table for the default route.  The truth is, it isn't, the
insert code will only allow one entry to exist in the zero
prefix hash table, because all keys evaluate to zero and all
keys in a hash table must be unique.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-31 16:16:50 -08:00