Commit Graph

34 Commits

Author SHA1 Message Date
David Howells
c06cfb08b8 KEYS: Remove key_type::match in favour of overriding default by match_preparse
A previous patch added a ->match_preparse() method to the key type.  This is
allowed to override the function called by the iteration algorithm.
Therefore, we can just set a default that simply checks for an exact match of
the key description with the original criterion data and allow match_preparse
to override it as needed.

The key_type::match op is then redundant and can be removed, as can the
user_match() function.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2014-09-16 17:36:06 +01:00
Joe Perches
f96637be08 [CIFS] cifs: Rename cERROR and cFYI to cifs_dbg
It's not obvious from reading the macro names that these macros
are for debugging.  Convert the names to a single more typical
kernel style cifs_dbg macro.

	cERROR(1, ...)   -> cifs_dbg(VFS, ...)
	cFYI(1, ...)     -> cifs_dbg(FYI, ...)
	cFYI(DBG2, ...)  -> cifs_dbg(NOISY, ...)

Move the terminating format newline from the macro to the call site.

Add CONFIG_CIFS_DEBUG function cifs_vfs_err to emit the
"CIFS VFS: " prefix for VFS messages.

Size is reduced ~ 1% when CONFIG_CIFS_DEBUG is set (default y)

$ size fs/cifs/cifs.ko*
   text    data     bss     dec     hex filename
 265245	   2525	    132	 267902	  4167e	fs/cifs/cifs.ko.new
 268359    2525     132  271016   422a8 fs/cifs/cifs.ko.old

Other miscellaneous changes around these conversions:

o Miscellaneous typo fixes
o Add terminating \n's to almost all formats and remove them
  from the macros to be more kernel style like.  A few formats
  previously had defective \n's
o Remove unnecessary OOM messages as kmalloc() calls dump_stack
o Coalesce formats to make grep easier,
  added missing spaces when coalescing formats
o Use %s, __func__ instead of embedded function name
o Removed unnecessary "cifs: " prefixes
o Convert kzalloc with multiply to kcalloc
o Remove unused cifswarn macro

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2013-05-04 22:17:23 -05:00
Silviu-Mihai Popescu
f7f7c1850e fs: cifs: use kmemdup instead of kmalloc + memcpy
This replaces calls to kmalloc followed by memcpy with a single call to
kmemdup. This was found via make coccicheck.

Signed-off-by: Silviu-Mihai Popescu <silviupopescu1990@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2013-05-04 22:08:19 -05:00
Eric W. Biederman
64ed39dd1e cifs: Convert struct cifs_ses to use a kuid_t and a kgid_t
Cc: Steve French <smfrench@gmail.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-02-13 07:28:55 -08:00
David Howells
cf7f601c06 KEYS: Add payload preparsing opportunity prior to key instantiate or update
Give the key type the opportunity to preparse the payload prior to the
instantiation and update routines being called.  This is done with the
provision of two new key type operations:

	int (*preparse)(struct key_preparsed_payload *prep);
	void (*free_preparse)(struct key_preparsed_payload *prep);

If the first operation is present, then it is called before key creation (in
the add/update case) or before the key semaphore is taken (in the update and
instantiate cases).  The second operation is called to clean up if the first
was called.

preparse() is given the opportunity to fill in the following structure:

	struct key_preparsed_payload {
		char		*description;
		void		*type_data[2];
		void		*payload;
		const void	*data;
		size_t		datalen;
		size_t		quotalen;
	};

Before the preparser is called, the first three fields will have been cleared,
the payload pointer and size will be stored in data and datalen and the default
quota size from the key_type struct will be stored into quotalen.

The preparser may parse the payload in any way it likes and may store data in
the type_data[] and payload fields for use by the instantiate() and update()
ops.

The preparser may also propose a description for the key by attaching it as a
string to the description field.  This can be used by passing a NULL or ""
description to the add_key() system call or the key_create_or_update()
function.  This cannot work with request_key() as that required the description
to tell the upcall about the key to be created.

This, for example permits keys that store PGP public keys to generate their own
name from the user ID and public key fingerprint in the key.

The instantiate() and update() operations are then modified to look like this:

	int (*instantiate)(struct key *key, struct key_preparsed_payload *prep);
	int (*update)(struct key *key, struct key_preparsed_payload *prep);

and the new payload data is passed in *prep, whether or not it was preparsed.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-10-08 13:49:48 +10:30
Jeff Layton
04febabcf5 cifs: sanitize username handling
Currently, it's not very clear whether you're allowed to have a NULL
vol->username or ses->user_name. Some places check for it and some don't.

Make it clear that a NULL pointer is OK in these fields, and ensure that
all the callers check for that.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2012-01-17 22:40:26 -06:00
Steve French
96daf2b091 [CIFS] Rename three structures to avoid camel case
secMode to sec_mode
and
cifsTconInfo to cifs_tcon
and
cifsSesInfo to cifs_ses

Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-05-27 04:34:02 +00:00
Steve French
8727c8a85f Allow user names longer than 32 bytes
We artificially limited the user name to 32 bytes, but modern servers handle
larger.  Set the maximum length to a reasonable 256, and make the user name
string dynamically allocated rather than a fixed size in session structure.
Also clean up old checkpatch warning.

Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-04-12 00:42:06 +00:00
Pavel Shilovsky
a9f1b85e5b CIFS: Simplify ipv*_connect functions into one (try #4)
Make connect logic more ip-protocol independent and move RFC1001 stuff into
a separate function. Also replace union addr in TCP_Server_Info structure
with sockaddr_storage.

Signed-off-by: Pavel Shilovsky <piastryyy@gmail.com>
Reviewed-and-Tested-by: Jeff Layton <jlayton@samba.org>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-06 19:07:53 +00:00
Jeff Layton
ba5dadbf4e cifs: account for new creduid=0x%x parameter in spnego upcall string
The commit that added the creduid=0x%x parameter failed to increase the
buffer allocation to account for it.

Reported-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-08-05 17:17:50 +00:00
Jeff Layton
3e4b3e1f68 cifs: add separate cred_uid field to sesInfo
Right now, there's no clear separation between the uid that owns the
credentials used to do the mount and the overriding owner of the files
on that mount.

Add a separate cred_uid field that is set to the real uid
of the mount user. Unlike the linux_uid, the uid= option does not
override this parameter. The parm is sent to cifs.upcall, which can then
preferentially use the creduid= parm instead of the uid= parm for
finding credentials.

This is not the only way to solve this. We could try to do all of this
in kernel instead by having a module parameter that affects what gets
passed in the uid= field of the upcall. That said, we have a lot more
flexibility to change things in userspace so I think it probably makes
sense to do it this way.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-08-02 12:40:39 +00:00
Jeff Layton
26efa0bac9 cifs: have decode_negTokenInit set flags in server struct
...rather than the secType. This allows us to get rid of the MSKerberos
securityEnum. The client just makes a decision at upcall time.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-05-05 23:24:11 +00:00
Joe Perches
b6b38f704a [CIFS] Neaten cERROR and cFYI macros, reduce text space
Neaten cERROR and cFYI macros, reduce text space
~2.5K

Convert '__FILE__ ": " fmt' to '"%s: " fmt', __FILE__' to save text space
Surround macros with do {} while
Add parentheses to macros
Make statement expression macro from macro with assign
Remove now unnecessary parentheses from cFYI and cERROR uses

defconfig with CIFS support old
$ size fs/cifs/built-in.o
   text	   data	    bss	    dec	    hex	filename
 156012	   1760	    148	 157920	  268e0	fs/cifs/built-in.o

defconfig with CIFS support old
$ size fs/cifs/built-in.o
   text	   data	    bss	    dec	    hex	filename
 153508	   1760	    148	 155416	  25f18	fs/cifs/built-in.o

allyesconfig old:
$ size fs/cifs/built-in.o
   text	   data	    bss	    dec	    hex	filename
 309138	   3864	  74824	 387826	  5eaf2	fs/cifs/built-in.o

allyesconfig new
$ size fs/cifs/built-in.o
   text	   data	    bss	    dec	    hex	filename
 305655	   3864	  74824	 384343	  5dd57	fs/cifs/built-in.o

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-04-21 03:50:45 +00:00
Tejun Heo
5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Jeff Layton
8c58b54574 cifs: send IPv6 addr in upcall with colon delimiters
Make it easier on the upcall program by adding ':' delimiters between
each group of hex digits.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-09-01 22:24:10 +00:00
Jeff Layton
c4c1bff64d cifs: add pid of initiating process to spnego upcall info
cifs: add pid of initiating process to spnego upcall info

This will allow the upcall to poke in /proc/<pid>/environ and get
the value of the $KRB5CCNAME env var for the process.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-07-09 21:14:58 +00:00
Jeff Layton
50b64e3b77 cifs: fix IPv6 address length check
For IPv6 the userspace mount helper sends an address in the "ip="
option.  This check fails if the length is > 35 characters. I have no
idea where the magic 35 character limit came from, but it's clearly not
enough for IPv6. Fix it by making it use the INET6_ADDRSTRLEN #define.

While we're at it, use the same #define for the address length in SPNEGO
upcalls.

Reported-by: Charles R. Anderson <cra@wpi.edu>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-06-02 15:45:40 +00:00
Jeff Layton
d9fb5c091b cifs: no need to use rcu_assign_pointer on immutable keys
cifs: no need to use rcu_assign_pointer on immutable keys

Neither keytype in use by CIFS has an "update" method. This means that
the keys are immutable once instantiated. We don't need to use RCU
to set the payload data pointers.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-04-17 01:26:49 +00:00
David S. Miller
198d6ba4d7 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:

	drivers/isdn/i4l/isdn_net.c
	fs/cifs/connect.c
2008-11-18 23:38:23 -08:00
Steve French
3ec332ef7a [CIFS] clean up server protocol handling
We're currently declaring both a sockaddr_in and sockaddr6_in on the
stack, but we really only need storage for one of them. Declare a
sockaddr struct and cast it to the proper type. Also, eliminate the
protocolType field in the TCP_Server_Info struct. It's redundant since
we have a sa_family field in the sockaddr anyway.

We may need to revisit this if SCTP is ever implemented, but for now
this will simplify the code.

CIFS over IPv6 also has a number of problems currently. This fixes all
of them that I found. Eventually, it would be nice to move more of the
code to be protocol independent, but this is a start.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-11-14 03:35:10 +00:00
Harvey Harrison
be85940548 fs: replace NIPQUAD()
Using NIPQUAD() with NIPQUAD_FMT, %d.%d.%d.%d or %u.%u.%u.%u
can be replaced with %pI4

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-31 00:56:28 -07:00
Harvey Harrison
4b7a4274ca net: replace %#p6 format specifier with %pi6
gcc warns when using the # modifier with the %p format specifier,
so we can't use this to omit the colons when needed, introduces
%pi6 instead.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-29 12:50:24 -07:00
Harvey Harrison
b071195deb net: replace all current users of NIP6_SEQFMT with %#p6
The define in kernel.h can be done away with at a later time.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-28 16:05:40 -07:00
Steve French
7c9c3760b3 [CIFS] add constants for string lengths of keynames in SPNEGO upcall string
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-09-23 17:23:09 +00:00
Steve French
c16fefa563 [CIFS] distinguish between Kerberos and MSKerberos in upcall
Properly handle MSKRB5 by passing sec=mskrb5 to the upcall so that the
spengo blob can be generated appropriately. Also, make
decode_negTokenInit prefer whichever mechanism is first in the list.

Needed for some NetApp servers, and possibly some older
versions of Windows which treat the two KRB5 mechanisms differently.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-08-19 19:35:33 +00:00
Jeff Layton
66b8bd3c40 [CIFS] properly account for new user= field in SPNEGO upcall string allocation
...it doesn't look like it's being accounted for at the moment. Also
try to reorganize the calculation to make it a little more evident
what each piece means.

This should probably go to the stable series as well...

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-08-01 17:54:32 +00:00
Igor Mammedov
e4058245ac Adds username in the upcall key for unattended mounts with keytab
Signed-off-by: Igor Mammedov <niallain@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-05-22 14:09:37 +00:00
Andrew Morton
ead03e30b0 [CIFS] fix warning in cifs_spnego.c
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-02-05 15:51:24 +00:00
Jeff Layton
05b3de63da [CIFS] Only dump SPNEGO key if CONFIG_CIFS_DEBUG2 is set
The SPNEGO key data is not terribly interesting except in certain
debugging situations. Only dump it to the ring buffer if needed.

Signed-off-by: Jeff Layton <jlayton@tupile.poochiereds.net>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-12-31 00:51:45 +00:00
Steve French
f7a44eadd5 [CIFS] remove build warning
CC: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-11-17 00:01:51 +00:00
Jeff Layton
d6c2e4d02b [CIFS] have cifs_get_spnego_key get the hostname from TCP_Server_Info
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-11-16 22:23:17 +00:00
Steve French
68bf728a22 [CIFS] add ver= prefix to upcall format version
Acked-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Igor Mammedov <niallan@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-11-16 18:32:52 +00:00
Igor Mammedov
9eae8a8903 [CIFS] Add uid to key description so krb can handle user mounts
Adds uid to key description fro supporting user mounts
and minor formating changes

Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Igor Mammedov <niallain@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-11-08 16:13:31 +00:00
Steve French
f1d662a7d5 [CIFS] Add upcall files for cifs to use spnego/kerberos
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-11-05 14:38:08 +00:00