Commit Graph

38 Commits

Author SHA1 Message Date
Linus Walleij
03e9f0cac5 pinctrl: clean up after enable refactoring
commit 2243a87d90
"pinctrl: avoid duplicated calling enable_pinmux_setting for a pin"
removed the .disable callback from the struct pinmux_ops,
making the .enable() callback the only remaining callback.

However .enable() is a bad name as it seems to imply that a
muxing can also be disabled. Rename the callback to .set_mux()
and also take this opportunity to clean out any remaining
mentions of .disable() from the documentation.

Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Acked-by: Fan Wu <fwu@marvell.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-09-04 10:05:07 +02:00
Linus Torvalds
e0b8b78651 This is the bulk pin control changes for the v3.17 merge
development cycle:
 
 - Get rid of the .disable() callback from the driver callback
   vtable. This callback was abused and counterintuitive since
   a pin or group of pins can be said to always be in some
   setting, and never really disabled. We now only enable a
   certain muxing, and move between some certain muxings, we
   never "disable" a mux setting.
 
 - Some janitorial moving the MSM, Samsung and Nomadik and
   drivers to their own subdirectories for a clearer view in
   the subsystem. This will continue.
 
 - Kill off the use of the return value from gpiochip_remove(),
   this will be done in parallel in the GPIO subsystem and
   hopefully not trigger too many unchecked return value
   warnings before we get rid of this altogether.
 
 - A huge set of changes and improvements to the Allwinner
   sunxi drivers especially for their latest A23 and A31 SoCs,
   and some ground work for the new sun8i platform family.
 
 - A large set of Rockchip driver improvements adding support
   for the RK3288 SoC.
 
 - Advances in migration of older Freescale platforms to pin
   control, especially i.MX1.
 
 - Samsung and Exynos improvements.
 
 - Support for the Qualcomm MSM8960 SoC.
 
 - Use the gpiolib irqchip helpers for the ST SPEAr and
   Intel Baytrail drivers.
 
 - A bunch of nice janitorial work done with cppcheck.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJT41HwAAoJEEEQszewGV1zVN0QAMJOJcsjYyHG+b/y0upJ5n1c
 tyPelyxKrpGUUTvTsO5LiqvoIfa2E/DrwXupRAC4zAXvb+x3TUGkiluK4Yxl5e56
 AqjePnSydqqHiRZOK4Q06W7VwGUoxLltDmDPTcra+DAaijIeKUPMQE1MvcPxisMe
 IR7PZN58JYCG3ZV5yjwfBBxcRAm8KiiwHvQdBywPIGGvvmpy1X+U96U869nQgUH2
 70lpJVPx75bhyAFk99bE9nAnroZeRR7mvijjf26ssyAFNqeJ0K7Xlom+NtpHdiw0
 lsDKdBiAWVbZON/7Pc24gpHzhBoIYdA/6LxPA8Xz4QVFRmfxmNkZhuXZnZ7Dbuj2
 xv9HtnjExqjZcfeNyUlO0iQDEQIUN/oPkaBS2G8DNZ/bmQqC8EzkIFh6F72KO1s2
 7FU214LcuBYuAa3HvNLmgtjSkgou8tTMj58rnZ1XDr2mI9tzlrwI3i6ZrJZWKDur
 NIoRAcUZkFiMpXxqLbk4UXzDvuJgrzaFiQ2PkxTXAlC2DjXz+gXPzPIOSD5LTaHE
 k3WvZfuGK2iPoKeDHaLx2qEl9PoD5hz1JH3o+bgOKkRZG2gEJWd02JwhuPyRPLfc
 TeBgmdYS2t2MBS21VsqoObw8336oCHJu7tDAxTkAalLsZy9MV2WqThhZoYggZ/Rq
 yMqCr8vfd2pRVtwYe7Wc
 =t1pR
 -----END PGP SIGNATURE-----

Merge tag 'pinctrl-v3.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pinctrl updates from Linus Walleij:
 "This is the bulk pin control changes for the v3.17 merge development
  cycle:

   - get rid of the .disable() callback from the driver callback vtable.

     This callback was abused and counterintuitive since a pin or group
     of pins can be said to always be in some setting, and never really
     disabled.  We now only enable a certain muxing, and move between
     some certain muxings, we never "disable" a mux setting

   - some janitorial moving the MSM, Samsung and Nomadik and drivers to
     their own subdirectories for a clearer view in the subsystem.  This
     will continue

   - kill off the use of the return value from gpiochip_remove(), this
     will be done in parallel in the GPIO subsystem and hopefully not
     trigger too many unchecked return value warnings before we get rid
     of this altogether

   - a huge set of changes and improvements to the Allwinner sunxi
     drivers especially for their latest A23 and A31 SoCs, and some
     ground work for the new sun8i platform family

   - a large set of Rockchip driver improvements adding support for the
     RK3288 SoC

   - advances in migration of older Freescale platforms to pin control,
     especially i.MX1

   - Samsung and Exynos improvements

   - support for the Qualcomm MSM8960 SoC

   - use the gpiolib irqchip helpers for the ST SPEAr and Intel Baytrail
     drivers

   - a bunch of nice janitorial work done with cppcheck"

* tag 'pinctrl-v3.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (61 commits)
  pinctrl: baytrail: Convert to use gpiolib irqchip
  pinctrl: sunxi: number gpio ranges starting from 0
  pinctrl: sunxi: use gpiolib API to mark a GPIO used as an IRQ
  pinctrl: rockchip: add drive-strength control for rk3288
  pinctrl: rockchip: add separate type for rk3288
  pinctrl: rockchip: set is_generic in pinconf_ops
  pinctrl: msm: drop negativity check on unsigned value
  pinctrl: remove all usage of gpio_remove ret val in driver/pinctl
  pinctrl: qcom: Make muxing of gpio function explicit
  pinctrl: nomadik: move all Nomadik drivers to subdir
  pinctrl: samsung: Group all drivers in a sub-dir
  sh-pfc: sh73a0: Introduce the use of devm_regulator_register
  sh-pfc: Add renesas,pfc-r8a7791 to binding documentation
  pinctrl: msm: move all qualcomm drivers to subdir
  pinctrl: msm: Add msm8960 definitions
  pinctrl: samsung: Allow pin value to be initialized using pinfunc
  pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes
  pinctrl: exynos: Consolidate irq_chips of GPIO and WKUP EINTs
  pinctrl: samsung: Handle GPIO request and free using pinctrl helpers
  pinctrl: samsung: Decouple direction setting from pinctrl
  ...
2014-08-07 17:20:53 -07:00
Chen-Yu Tsai
343f132752 pinctrl: sunxi: number gpio ranges starting from 0
The pinctrl-sunxi driver originally used the pin number as the gpio
range offset. This resulted in large, bogus gpio numbers for the
new sun6i-a31-r pinctrl devices.

This patch makes the driver number the gpios ranges starting from an
offset of 0, by subtracting the pin_base number from the pin number.
This also makes the system-wide gpio number match the pin number.

Tested on sun8i with sysfs exported gpios.

This patch also changes the GPIO bindings for R_PIO:

    gpios = <&r_pio B N flag>;

Where B originally was the pinbank label (L or M) counted from A,
with this patch it becomes (L or M) counted from its pinbank base (L).

Thus

    gpios = <&r_pio 10 11 0>; /* PL11 */

becomes

    gpios = <&r_pio 0 11 0>; /* PL11 */

IMO this is correct, as the binding shows the bank offset and pin offset
within the bank for the GPIO controller. But I'm worried it might be a
bit confusing.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-28 12:14:33 +02:00
Chen-Yu Tsai
f83549d61d pinctrl: sunxi: use gpiolib API to mark a GPIO used as an IRQ
When an IRQ is started on a GPIO line, mark this GPIO as IRQ in
the gpiolib so we can keep track of the usage centrally.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-28 12:10:46 +02:00
abdoulaye berthe
b4e7c55dab pinctrl: remove all usage of gpio_remove ret val in driver/pinctl
Signed-off-by: abdoulaye berthe <berthe.ab@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-22 16:34:12 +02:00
Chen-Yu Tsai
d22bf40f46 pinctrl: sunxi: Add A23 R_PIO controller support
The A23 has a R_PIO pin controller, similar to the one found on the A31 SoC.
Add support for the pins controlled by the R_PIO controller.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-11 14:08:30 +02:00
Chen-Yu Tsai
4c821d1c93 pinctrl: sunxi: Add A23 PIO controller support
The A23 uses the same pin controller as previous SoC's from Allwinner.
Add support for the pins controlled by the main PIO controller.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-11 14:08:30 +02:00
Maxime Ripard
d9ff081d91 pinctrl: sunxi: Remove PINCTRL_SUNXI
The PINCTRL_SUNXI configuration was kept only to deal with the introduction of
per-machine symbols and the various pintrl drivers through different tree.

Now that it's not useful anymore, we can just remove it.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-11 14:08:29 +02:00
Chen-Yu Tsai
c01607c7da pinctrl: sunxi: Remove gpio_out function from sun5i-a13 PG0/1/2 pins
The A13 user manual states pins PG0/1/2 only have GPIO input and
interrupt functions. Remove the gpio_out functions for these pins.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-11 14:08:29 +02:00
Chen-Yu Tsai
0d3bafac65 pinctrl: sunxi: Fix multi bank interrupt support in gpio_to_irq
When mapping the interrupts, the gpio_to_irq function did not consider
the bank number of the gpio pin in question, only the offset or the
interrupt number in the bank. As a result, requests for interrupts in
the later banks get mapped to the first bank.

This issue was discovered while enabling mmc on the new sun8i platform.
The tablet I have uses a pin/interrupt from the second bank to do mmc
card detection. Tested on this very device with register inspection and
actual mmc card insertion/removal.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-11 14:08:25 +02:00
Hans de Goede
d61e23e525 pinctrl: sunxi: Define enable / disable irq callbacks
Some drivers use disable_irq / enable_irq and do the work
clearing the source in another thread instead of using a threaded
interrupt handler.

The irqchip used not having irq_disable and irq_enable
callbacks in this case, will lead to unnecessary spurious
interrupts:

On a disable_irq in a chip without a handler for this, the irq
core will remember the disable, but not actually call into the
irqchip. With a level triggered interrupt (where the source has
not been cleared) this will lead to an immediate retrigger, at
which point the irq-core will mask the irq. So having an
irq_disable callback in the irqchip will save us the interrupt
firing a 2nd time for nothing.

Drivers using disable / enable_irq like this, will call
enable_irq when they finally have cleared the interrupt source,
without an enable_irq callback, this will turn into an unmask,
at which point the irq will trigger immediately because when it
was originally acked the level was still high, so the ack was
a nop.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-11 14:08:24 +02:00
Hans de Goede
f4c51c103b pinctrl: sunxi: Properly handle level triggered gpio interrupts
For level triggered gpio interrupts we need to use handle_fasteoi_irq,
like we do with the irq-sunxi-nmi driver. This is necessary to give threaded
interrupt handlers a chance to actuall clear the source of the interrupt
(which may involve sleeping waiting for i2c / spi / mmc transfers), before
acknowledging the interrupt.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-11 14:08:24 +02:00
Hans de Goede
fea6d8efd0 pinctrl: sunxi: Move setting of mux to irq type
With level triggered interrupt mask / unmask will get called for each
interrupt, doing the somewhat expensive mux setting on each unmask thus is
not a good idea. Instead add a request_resources callback and do it there.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-11 14:08:24 +02:00
Chen-Yu Tsai
578c0a8721 pinctrl: sunxi: Add IRQCHIP_SKIP_SET_WAKE flag for pinctrl irq chip
The sunxi pinctrl irq chip driver does not support wakeup at the
moment. Adding IRQCHIP_SKIP_SET_WAKE lets the irqs work with drivers
using wakeup.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-11 14:08:23 +02:00
Maxime Ripard
aebdc8abc9 pinctrl: sunxi: Implement multiple interrupt banks support
The A23 and A31 support multiple interrupt banks. Support it by adding a linear
domain covering all the banks. It's trickier than it should because there's an
interrupt per bank, so we have multiple interrupts using the same domain.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-06-19 09:35:12 +02:00
Maxime Ripard
c11a33c15e pinctrl: sunxi: Declare the interrupt function for the A31
The primary pinctrl device has 4 interrupt banks. As usual, to be able to
generate interrupts, the pins supporting it need to be muxed to a special
function. Declare these functions in the pins array.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-06-19 09:35:12 +02:00
Maxime Ripard
8966ada2d4 pinctrl: sunxi: Declare the number of interrupt banks in the descriptor
Declare in the description structure associated to the compatible the number of
interrupt banks the device has. For now, we're not doing anything with it.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-06-19 09:35:11 +02:00
Maxime Ripard
6e1c30239f pinctrl: sunxi: Add macro definition for pinctrl with more than one interrupt
The A31 and A23, unlike the other Allwinner SoCs, have several interrupts banks
and parent interrupts, while the other only have up to 32 interrupts in a
single bank and a single parent interrupt.

Start supporting it by introducing a function macro to declare irq functions
and their banks.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-06-19 09:35:11 +02:00
Maxime Ripard
645ec71454 pinctrl: sunxi: Remove irq_mask_ack and use irq_ack instead
If irq_mask_ack is not defined, mask_ack_irq will call irq_mask and then
irq_ack. In order to avoid code duplication, between irq_mask_ack and irq_mask,
just declare irq_ack.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-06-19 09:35:11 +02:00
Sachin Kamat
bd07894e21 pinctrl: sunxi: Fix potential null pointer dereference
kzalloc can fail. Add a null check to avoid null pointer
dereference error while accessing the pointer later.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-06-19 09:34:56 +02:00
Chen-Yu Tsai
d54e9a28ca pinctrl: sunxi: create irq/pin mapping during init
The irq/pin mapping is used to lookup the pin to mux to the irq
function when the irq is enabled. It is created when gpio_to_irq
is called. Creating the mapping during init allows us to map the
interrupts directly from the device tree.

Originally the IRQ to pin mapping was created when gpio_to_irq
was called with a GPIO handle. The mapping in turn is used to mux
the pin into EINT mode.

If the mapping is created during gpio_to_irq, we can't use the
interrupts directly, i.e. through the DT with "interrupts = <&pio A 4>".

Instead we'd have to use "gpios = <&pio A B>", then pass the gpio
through to gpio_to_irq.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-27 16:11:30 +02:00
Maxime Ripard
de5af04e3e pinctrl: sunxi: depend on RESET_CONTROLLER
The A31 R_PIO driver depends on the reset framework in a mandatory way. Express
this by adding a depends on the reset framework in Kconfig

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-27 15:19:21 +02:00
Chen-Yu Tsai
b4575c6998 pinctrl: sunxi: fix pin numbers passed to register offset helpers
The pin numbers passed to sunxi_*_reg helpers to get the correct
registers should be the pin offset for the PIO block, not the
absolute number we use that is based on the alphanumeric labels
Allwinner uses.

This patch subtracts .pin_base from the pin number passed to these
functions, so the driver accesses the correct registers.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-27 11:26:01 +02:00
Maxime Ripard
ba6764d57d pinctrl: sunxi: Fix multiple registration issue
When the support for the PRCM muxer on the A31 has been added, the global
static pinctl_desc definition has been left as is. Unfortunately, this
structure is used to register the pinctrl device, and prior to this
registration, we set the name and pins field.

Since this structure is shared across instances, that means that the latest
registered pinctrl device wins in setting the name, pins and pins numbers,
which is not really a good thing.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-23 00:36:27 +02:00
Maxime Ripard
118c565a8f pinctrl: sunxi: Fix recursive dependency
Fix the following configuration error:
drivers/pinctrl/sunxi/Kconfig:3:error: recursive dependency detected!
drivers/pinctrl/sunxi/Kconfig:3:	symbol PINCTRL_SUNXI is selected by PINCTRL_SUN4I_A10
drivers/pinctrl/sunxi/Kconfig:9:	symbol PINCTRL_SUN4I_A10 default value contains PINCTRL_SUNXI

Add a new intermedia PINCTRL_SUNXI_COMMON, that superseeds the PINCTRL_SUNXI
one.

We still need to keep PINCTRL_SUNXI at the moment in order to preserve
bisectability. Indeed, during that merge window, we also introduced the
MACH_SUN* symbols. Since it's going through different trees, we can't rely on
the fact that the options will be there, while ARCH_SUNXI still select
PINCTRL_SUNXI.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-23 00:35:16 +02:00
Maxime Ripard
b22116b33a pinctrl: sunxi: Enable the pinctrl Kconfig options by default
Enable the freshly introduced Kconfig options whenever their matching
architecture is enabled.

Since the Kconfig symbols for these machines are going through a different
tree, keep PINCTRL_SUNXI around for the moment to avoid breaking the defconfig.
It should be removed eventually.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-23 00:01:50 +02:00
Maxime Ripard
dc9691066f pinctrl: sunxi: Move the reset handling functions out of the core
The way that reset is handled right now is that it is made optional for every
pinctrl driver, while actually, it isn't used at all for the main pin
controllers so far, and while it's mandatory for the A31's secondary pin
controller.

Move the reset functions out of the core and in the driver, where they can be
made mandatory.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-05-04 19:57:18 -05:00
Maxime Ripard
340ba6c497 pinctrl: sunxi: Introduce per-driver Kconfig options
Add one Kconfig option for each driver. This will allow to better control which
driver is enabled, instead of having either all or nothing.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-05-04 19:41:44 -05:00
Maxime Ripard
2519859418 pinctrl: sunxi: Move Allwinner A20 pinctrl driver to a driver of its own
Move the pin description to a driver specific to be.

This is the final step toward retiring pinctrl-sunxi-pins.h that used to define
all the pins for all the Allwinner SoCs in a single header, that would have in
turn result in having these structures in the final binary as many times as the
header was included.

We can finally remove that header, and remove all the driver part of the
pinctrl-sunxi core.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-05-04 00:04:49 -07:00
Maxime Ripard
16c675f989 pinctrl: sunxi: Move Allwinner A31 special pins driver to a driver of its own
Move the pin description to a driver specific to be. This is one more step
toward retiring pinctrl-sunxi-pins.h that used to define all the pins for all
the Allwinner SoCs in a single header, that would have in turn result in having
these structures in the final binary as many times as the header was included.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-05-04 00:03:31 -07:00
Maxime Ripard
1c996176e7 pinctrl: sunxi: Move Allwinner A31 pinctrl driver to a driver of its own
Move the pin description to a driver specific to be. This is one more step
toward retiring pinctrl-sunxi-pins.h that used to define all the pins for all
the Allwinner SoCs in a single header, that would have in turn result in having
these structures in the final binary as many times as the header was included.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-05-04 00:03:30 -07:00
Maxime Ripard
342cefb212 pinctrl: sunxi: Move Allwinner A13 pinctrl driver to a driver of its own
Move the pin description to a driver specific to be. This is one more step
toward retiring pinctrl-sunxi-pins.h that used to define all the pins for all
the Allwinner SoCs in a single header, that would have in turn result in having
these structures in the final binary as many times as the header was included.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-05-04 00:03:29 -07:00
Maxime Ripard
0a127c1c39 pinctrl: sunxi: Move Allwinner A10s pinctrl driver to a driver of its own
Move the pin description to a driver specific to be. This is one more step
toward retiring pinctrl-sunxi-pins.h that used to define all the pins for all
the Allwinner SoCs in a single header, that would have in turn result in having
these structures in the final binary as many times as the header was included.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-05-04 00:03:29 -07:00
Maxime Ripard
f2821b1ca3 pinctrl: sunxi: Move Allwinner A10 pinctrl driver to a driver of its own
Move the pin description to a driver specific to be. This is one more step
toward retiring pinctrl-sunxi-pins.h that used to define all the pins for all
the Allwinner SoCs in a single header, that would have in turn result in having
these structures in the final binary as many times as the header was included.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-05-04 00:03:28 -07:00
Maxime Ripard
2284ba6b7d pinctrl: sunxi: Libraryse the driver
This will allow to have multiple drivers using the same core code, and
eventually, retire pinctrl-sunxi-pins.h

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-05-04 00:03:24 -07:00
Maxime Ripard
4409cafc1a pinctrl: sunxi: Switch to devm_ioremap_resource
The previous code was calling of_iomap, which doesn't do any resource
management, and doesn't call request_mem_region either. Use
devm_ioremap_resource that do both.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-05-03 23:59:44 -07:00
Maxime Ripard
d10acc6353 pinctrl: sunxi: Replace hardcoded pin defines by a macro
We previously had an evergrowing (and exhaustive) list of the pins that could
be used on any Allwinner SoCs. These defines were then used by each pinctrl
driver to declare the list of functions for this pin. Since it's pretty much
all boilerplate, we can remove it just by a single macro.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-05-03 23:59:44 -07:00
Maxime Ripard
5f9107774f pinctrl: sunxi: Move the Allwinner pinctrl driver to its own directory
This will allow to create numerous files without crippling the main pinctrl
directory.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-05-03 23:59:43 -07:00