Commit Graph

11 Commits

Author SHA1 Message Date
Clemens Ladisch
5c40cbfefa firewire: core: use separate timeout for each transaction
Using a single timeout for all transaction that need to be flushed does
not work if the submission of new transactions can defer the timeout
indefinitely into the future.  We need to have timeouts that do not
change due to other transactions; the simplest way to do this is with a
separate timer for each transaction.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (+ one lockdep annotation)
2010-05-19 00:26:30 +02:00
Clemens Ladisch
925e7a6504 firewire: ohci: enable 1394a enhancements
The OHCI spec says that, if the programPhyEnable bit is set, the driver
is responsible for configuring the IEEE1394a enhancements within the PHY
and the link consistently.  So do this.

Also add a quirk to allow disabling these enhancements; this is needed
for the TSB12LV22 where ack accelerations are buggy (erratum b).

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-04-10 16:51:14 +02:00
Clemens Ladisch
e7014dada0 firewire: ohci: do not clear PHY interrupt status inadvertently
The interrupt status bits in PHY register 5 are cleared by writing a one
bit.  To avoid clearing them unadvertently, do not write them back when
they were read as set, but only when they have been explicitly requested
to be set.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-04-10 16:51:14 +02:00
Stefan Richter
168cf9af69 firewire: remove incomplete Bus_Time CSR support
The current implementation of Bus_Time read access was buggy since it
did not ensure that Bus_Time.second_count_hi and second_count_lo came
from the same 128 seconds period.

Reported-by: Håkan Johansson <f96hajo@chalmers.se>

Instead of a fix, remove Bus_Time register support altogether.  The spec
requires all cycle master capable nodes to implement this (all Linux
nodes are cycle master capable) while it also says that it "may" be
initialized by the bus manager or by the IRM standing in for a bus
manager.  (Neither Linux' firewire-core nor ieee1394 nodemgr implement
this.)

Since we cannot rely on Bus_Time having been initialized by a bus
manager, it is better to return an error instead of a nonsensical value
on a read request to Bus_Time.

Alternatively, we could fix the Bus_Time read integrity bug _and_
implement (a) cycle master's write support of the register as well as
(b) bus manager's Bus_Time initialization service, i.e. preservation of
the Bus_Time when the cycle master node of a bus changes.  However, that
would be quite some code for a feature that is unreliable to begin with
and very likely unused in practice.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-02-20 22:33:14 +01:00
Stefan Richter
cb7c96da36 firewire: core: optimize Topology Map creation
The Topology Map of the local node was created in CPU byte order,
then a temporary big endian copy was created to compute the CRC,
and when a read request to the Topology Map arrived it had to be
converted to big endian byte order again.

We now generate it in big endian byte order in the first place.
This also rids us of 1000 bytes stack usage in tasklet context.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-10-14 23:10:48 +02:00
Stefan Richter
8e85973efc firewire: optimize config ROM creation
The config ROM image of the local node was created in CPU byte order,
then a temporary big endian copy was created to compute the CRC, and
finally the card driver created its own big endian copy.

We now generate it in big endian byte order in the first place to avoid
one byte order conversion and the temporary on-stack copy of the ROM
image (1000 bytes stack usage in process context).  Furthermore, two
1000 bytes memset()s are replaced by one 1000 bytes - ROM length sized
memset.

The trivial fw_memcpy_{from,to}_be32() helpers are now superfluous and
removed.  The newly added __compute_block_crc() function will be folded
into fw_compute_block_crc() in a subsequent change.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-10-14 23:10:48 +02:00
Stefan Richter
18668ff9a3 firewire: core: header file cleanup
fw_card_get, fw_card_put, fw_card_release are currently not exported for
use outside the firewire-core.  Move their definitions/ declarations
from the subsystem header file to the core header file.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-09-12 14:48:40 +02:00
Stefan Richter
6fdc037094 firewire: core: do not DMA-map stack addresses
The DMA mapping API cannot map on-stack addresses, as explained in
Documentation/DMA-mapping.txt.  Convert the two cases of on-stack packet
payload buffers in firewire-core (payload of lock requests in the bus
manager work and in iso resource management) to slab-allocated memory.

There are a number on-stack buffers for quadlet write or quadlet read
requests in firewire-core and firewire-sbp2.  These are harmless; they
are copied to/ from card driver internal DMA buffers since quadlet
payloads are inlined with packet headers.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-06-25 19:42:36 +02:00
Jay Fenlason
c76acec6d5 firewire: add IPv4 support
Implement IPv4 over IEEE 1394 as per RFC 2734 for the newer firewire
stack.  This feature has only been present in the older ieee1394 stack
via the eth1394 driver.

Still to do:
  - fix ipv4_priv and ipv4_node lifetime logic
  - fix determination of speeds and max payloads
  - fix bus reset handling
  - fix unaligned memory accesses
  - fix coding style
  - further testing/ improvement of fragment reassembly
  - perhaps multicast support

Signed-off-by: Jay Fenlason <fenlason@redhat.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (rebased, copyright note, changelog)
2009-06-14 14:26:28 +02:00
Stefan Richter
099d54143e firewire: core: prepare for non-core children of card devices
The IP-over-1394 driver will add child devices beneath card devices
which are not of type fw_device.  Hence firewire-core's callbacks in
device_for_each_child() and device_find_child() need to check for the
device type now.

Initial version written by Jay Fenlason.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-06-06 21:45:50 +02:00
Stefan Richter
77c9a5daa9 firewire: reorganize header files
The three header files of firewire-core, i.e.
 "drivers/firewire/fw-device.h",
 "drivers/firewire/fw-topology.h",
 "drivers/firewire/fw-transaction.h",
are replaced by
 "drivers/firewire/core.h",
 "include/linux/firewire.h".

The latter includes everything which a firewire high-level driver (like
firewire-sbp2) needs besides linux/firewire-constants.h, while core.h
contains the rest which is needed by firewire-core itself and by low-
level drivers (card drivers) like firewire-ohci.

High-level drivers can now also reside outside of drivers/firewire
without having to add drivers/firewire to the header file search path in
makefiles.  At least the firedtv driver will be such a driver.

I also considered to spread the contents of core.h over several files,
one for each .c file where the respective implementation resides.  But
it turned out that most core .c files will end up including most of the
core .h files.  Also, the combined core.h isn't unreasonably big, and it
will lose more of its contents to linux/firewire.h anyway soon when more
firewire drivers are added.  (IP-over-1394, firedtv, and there are plans
for one or two more.)

Furthermore, fw-ohci.h is renamed to ohci.h.  The name of core.h and
ohci.h is chosen with regard to name changes of the .c files in a
follow-up change.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-06-05 16:26:18 +02:00