Commit Graph

1759 Commits

Author SHA1 Message Date
Linus Torvalds
644473e9c6 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull user namespace enhancements from Eric Biederman:
 "This is a course correction for the user namespace, so that we can
  reach an inexpensive, maintainable, and reasonably complete
  implementation.

  Highlights:
   - Config guards make it impossible to enable the user namespace and
     code that has not been converted to be user namespace safe.

   - Use of the new kuid_t type ensures the if you somehow get past the
     config guards the kernel will encounter type errors if you enable
     user namespaces and attempt to compile in code whose permission
     checks have not been updated to be user namespace safe.

   - All uids from child user namespaces are mapped into the initial
     user namespace before they are processed.  Removing the need to add
     an additional check to see if the user namespace of the compared
     uids remains the same.

   - With the user namespaces compiled out the performance is as good or
     better than it is today.

   - For most operations absolutely nothing changes performance or
     operationally with the user namespace enabled.

   - The worst case performance I could come up with was timing 1
     billion cache cold stat operations with the user namespace code
     enabled.  This went from 156s to 164s on my laptop (or 156ns to
     164ns per stat operation).

   - (uid_t)-1 and (gid_t)-1 are reserved as an internal error value.
     Most uid/gid setting system calls treat these value specially
     anyway so attempting to use -1 as a uid would likely cause
     entertaining failures in userspace.

   - If setuid is called with a uid that can not be mapped setuid fails.
     I have looked at sendmail, login, ssh and every other program I
     could think of that would call setuid and they all check for and
     handle the case where setuid fails.

   - If stat or a similar system call is called from a context in which
     we can not map a uid we lie and return overflowuid.  The LFS
     experience suggests not lying and returning an error code might be
     better, but the historical precedent with uids is different and I
     can not think of anything that would break by lying about a uid we
     can't map.

   - Capabilities are localized to the current user namespace making it
     safe to give the initial user in a user namespace all capabilities.

  My git tree covers all of the modifications needed to convert the core
  kernel and enough changes to make a system bootable to runlevel 1."

Fix up trivial conflicts due to nearby independent changes in fs/stat.c

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (46 commits)
  userns:  Silence silly gcc warning.
  cred: use correct cred accessor with regards to rcu read lock
  userns: Convert the move_pages, and migrate_pages permission checks to use uid_eq
  userns: Convert cgroup permission checks to use uid_eq
  userns: Convert tmpfs to use kuid and kgid where appropriate
  userns: Convert sysfs to use kgid/kuid where appropriate
  userns: Convert sysctl permission checks to use kuid and kgids.
  userns: Convert proc to use kuid/kgid where appropriate
  userns: Convert ext4 to user kuid/kgid where appropriate
  userns: Convert ext3 to use kuid/kgid where appropriate
  userns: Convert ext2 to use kuid/kgid where appropriate.
  userns: Convert devpts to use kuid/kgid where appropriate
  userns: Convert binary formats to use kuid/kgid where appropriate
  userns: Add negative depends on entries to avoid building code that is userns unsafe
  userns: signal remove unnecessary map_cred_ns
  userns: Teach inode_capable to understand inodes whose uids map to other namespaces.
  userns: Fail exec for suid and sgid binaries with ids outside our user namespace.
  userns: Convert stat to return values mapped from kuids and kgids
  userns: Convert user specfied uids and gids in chown into kuids and kgid
  userns: Use uid_eq gid_eq helpers when comparing kuids and kgids in the vfs
  ...
2012-05-23 17:42:39 -07:00
Linus Torvalds
88d6ae8dc3 Merge branch 'for-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
 "cgroup file type addition / removal is updated so that file types are
  added and removed instead of individual files so that dynamic file
  type addition / removal can be implemented by cgroup and used by
  controllers.  blkio controller changes which will come through block
  tree are dependent on this.  Other changes include res_counter cleanup
  and disallowing kthread / PF_THREAD_BOUND threads to be attached to
  non-root cgroups.

  There's a reported bug with the file type addition / removal handling
  which can lead to oops on cgroup umount.  The issue is being looked
  into.  It shouldn't cause problems for most setups and isn't a
  security concern."

Fix up trivial conflict in Documentation/feature-removal-schedule.txt

* 'for-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (21 commits)
  res_counter: Account max_usage when calling res_counter_charge_nofail()
  res_counter: Merge res_counter_charge and res_counter_charge_nofail
  cgroups: disallow attaching kthreadd or PF_THREAD_BOUND threads
  cgroup: remove cgroup_subsys->populate()
  cgroup: get rid of populate for memcg
  cgroup: pass struct mem_cgroup instead of struct cgroup to socket memcg
  cgroup: make css->refcnt clearing on cgroup removal optional
  cgroup: use negative bias on css->refcnt to block css_tryget()
  cgroup: implement cgroup_rm_cftypes()
  cgroup: introduce struct cfent
  cgroup: relocate __d_cgrp() and __d_cft()
  cgroup: remove cgroup_add_file[s]()
  cgroup: convert memcg controller to the new cftype interface
  memcg: always create memsw files if CONFIG_CGROUP_MEM_RES_CTLR_SWAP
  cgroup: convert all non-memcg controllers to the new cftype interface
  cgroup: relocate cftype and cgroup_subsys definitions in controllers
  cgroup: merge cft_release_agent cftype array into the base files array
  cgroup: implement cgroup_add_cftypes() and friends
  cgroup: build list of all cgroups under a given cgroupfs_root
  cgroup: move cgroup_clear_directory() call out of cgroup_populate_dir()
  ...
2012-05-22 17:40:19 -07:00
Linus Torvalds
cb60e3e65c Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security subsystem updates from James Morris:
 "New notable features:
   - The seccomp work from Will Drewry
   - PR_{GET,SET}_NO_NEW_PRIVS from Andy Lutomirski
   - Longer security labels for Smack from Casey Schaufler
   - Additional ptrace restriction modes for Yama by Kees Cook"

Fix up trivial context conflicts in arch/x86/Kconfig and include/linux/filter.h

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (65 commits)
  apparmor: fix long path failure due to disconnected path
  apparmor: fix profile lookup for unconfined
  ima: fix filename hint to reflect script interpreter name
  KEYS: Don't check for NULL key pointer in key_validate()
  Smack: allow for significantly longer Smack labels v4
  gfp flags for security_inode_alloc()?
  Smack: recursive tramsmute
  Yama: replace capable() with ns_capable()
  TOMOYO: Accept manager programs which do not start with / .
  KEYS: Add invalidation support
  KEYS: Do LRU discard in full keyrings
  KEYS: Permit in-place link replacement in keyring list
  KEYS: Perform RCU synchronisation on keys prior to key destruction
  KEYS: Announce key type (un)registration
  KEYS: Reorganise keys Makefile
  KEYS: Move the key config into security/keys/Kconfig
  KEYS: Use the compat keyctl() syscall wrapper on Sparc64 for Sparc32 compat
  Yama: remove an unused variable
  samples/seccomp: fix dependencies on arch macros
  Yama: add additional ptrace scopes
  ...
2012-05-21 20:27:36 -07:00
James Morris
ff2bb047c4 Merge branch 'master' of git://git.infradead.org/users/eparis/selinux into next
Per pull request, for 3.5.
2012-05-22 11:21:06 +10:00
John Johansen
cffee16e8b apparmor: fix long path failure due to disconnected path
BugLink: http://bugs.launchpad.net/bugs/955892

All failures from __d_path where being treated as disconnected paths,
however __d_path can also fail when the generated pathname is too long.

The initial ENAMETOOLONG error was being lost, and ENAMETOOLONG was only
returned if the subsequent dentry_path call resulted in that error.  Other
wise if the path was split across a mount point such that the dentry_path
fit within the buffer when the __d_path did not the failure was treated
as a disconnected path.

Signed-off-by: John Johansen <john.johansen@canonical.com>
2012-05-18 11:09:52 -07:00
John Johansen
bf83208e0b apparmor: fix profile lookup for unconfined
BugLink: http://bugs.launchpad.net/bugs/978038

also affects apparmor portion of
BugLink: http://bugs.launchpad.net/bugs/987371

The unconfined profile is not stored in the regular profile list, but
change_profile and exec transitions may want access to it when setting
up specialized transitions like switch to the unconfined profile of a
new policy namespace.

Signed-off-by: John Johansen <john.johansen@canonical.com>
2012-05-18 11:09:28 -07:00
Mimi Zohar
fbbb456347 ima: fix filename hint to reflect script interpreter name
When IMA was first upstreamed, the bprm filename and interp were
always the same.  Currently, the bprm->filename and bprm->interp
are the same, except for when only bprm->interp contains the
interpreter name.  So instead of using the bprm->filename as
the IMA filename hint in the measurement list, we could replace
it with bprm->interp, but this feels too fragil.

The following patch is not much better, but at least there is some
indication that sometimes we're passing the filename and other times
the interpreter name.

Reported-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-05-16 10:36:41 +10:00
James Morris
12fa8a2732 Merge branch 'for-1205' of http://git.gitorious.org/smack-next/kernel into next
Pull request from Casey.
2012-05-16 01:11:29 +10:00
David Howells
b404aef72f KEYS: Don't check for NULL key pointer in key_validate()
Don't bother checking for NULL key pointer in key_validate() as all of the
places that call it will crash anyway if the relevant key pointer is NULL by
the time they call key_validate().  Therefore, the checking must be done prior
to calling here.

Whilst we're at it, simplify the key_validate() function a bit and mark its
argument const.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-05-16 00:54:33 +10:00
Casey Schaufler
f7112e6c9a Smack: allow for significantly longer Smack labels v4
V4 updated to current linux-security#next
Targeted for git://gitorious.org/smack-next/kernel.git

Modern application runtime environments like to use
naming schemes that are structured and generated without
human intervention. Even though the Smack limit of 23
characters for a label name is perfectly rational for
human use there have been complaints that the limit is
a problem in environments where names are composed from
a set or sources, including vendor, author, distribution
channel and application name. Names like

	softwarehouse-pgwodehouse-coolappstore-mellowmuskrats

are becoming harder to avoid. This patch introduces long
label support in Smack. Labels are now limited to 255
characters instead of the old 23.

The primary reason for limiting the labels to 23 characters
was so they could be directly contained in CIPSO category sets.
This is still done were possible, but for labels that are too
large a mapping is required. This is perfectly safe for communication
that stays "on the box" and doesn't require much coordination
between boxes beyond what would have been required to keep label
names consistent.

The bulk of this patch is in smackfs, adding and updating
administrative interfaces. Because existing APIs can't be
changed new ones that do much the same things as old ones
have been introduced.

The Smack specific CIPSO data representation has been removed
and replaced with the data format used by netlabel. The CIPSO
header is now computed when a label is imported rather than
on use. This results in improved IP performance. The smack
label is now allocated separately from the containing structure,
allowing for larger strings.

Four new /smack interfaces have been introduced as four
of the old interfaces strictly required labels be specified
in fixed length arrays.

The access interface is supplemented with the check interface:
	access  "Subject                 Object                  rwxat"
	access2 "Subject Object rwaxt"

The load interface is supplemented with the rules interface:
	load   "Subject                 Object                  rwxat"
	load2  "Subject Object rwaxt"

The load-self interface is supplemented with the self-rules interface:
	load-self   "Subject                 Object                  rwxat"
	load-self2  "Subject Object rwaxt"

The cipso interface is supplemented with the wire interface:
	cipso  "Subject                  lvl cnt  c1  c2 ..."
	cipso2 "Subject lvl cnt  c1  c2 ..."

The old interfaces are maintained for compatibility.

Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
2012-05-14 22:48:38 -07:00
Tetsuo Handa
ceffec5541 gfp flags for security_inode_alloc()?
Dave Chinner wrote:
> Yes, because you have no idea what the calling context is except
> for the fact that is from somewhere inside filesystem code and the
> filesystem could be holding locks. Therefore, GFP_NOFS is really the
> only really safe way to allocate memory here.

I see. Thank you.

I'm not sure, but can call trace happen where somewhere inside network
filesystem or stackable filesystem code with locks held invokes operations that
involves GFP_KENREL memory allocation outside that filesystem?
----------
[PATCH] SMACK: Fix incorrect GFP_KERNEL usage.

new_inode_smack() which can be called from smack_inode_alloc_security() needs
to use GFP_NOFS like SELinux's inode_alloc_security() does, for
security_inode_alloc() is called from inode_init_always() and
inode_init_always() is called from xfs_inode_alloc() which is using GFP_NOFS.

smack_inode_init_security() needs to use GFP_NOFS like
selinux_inode_init_security() does, for initxattrs() callback function (e.g.
btrfs_initxattrs()) which is called from security_inode_init_security() is
using GFP_NOFS.

smack_audit_rule_match() needs to use GFP_ATOMIC, for
security_audit_rule_match() can be called from audit_filter_user_rules() and
audit_filter_user_rules() is called from audit_filter_user() with RCU read lock
held.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Casey Schaufler <cschaufler@cschaufler-intel.(none)>
2012-05-14 22:47:44 -07:00
Casey Schaufler
2267b13a7c Smack: recursive tramsmute
The transmuting directory feature of Smack requires that
the transmuting attribute be explicitly set in all cases.
It seems the users of this facility would expect that the
transmuting attribute be inherited by subdirectories that
are created in a transmuting directory. This does not seem
to add any additional complexity to the understanding of
how the system works.

Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
2012-05-14 22:45:17 -07:00
Kees Cook
2cc8a71641 Yama: replace capable() with ns_capable()
When checking capabilities, the question we want to be asking is "does
current() have the capability in the child's namespace?"

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-05-15 10:27:57 +10:00
Tetsuo Handa
77b513dda9 TOMOYO: Accept manager programs which do not start with / .
The pathname of /usr/sbin/tomoyo-editpolicy seen from Ubuntu 12.04 Live CD is
squashfs:/usr/sbin/tomoyo-editpolicy rather than /usr/sbin/tomoyo-editpolicy .
Therefore, we need to accept manager programs which do not start with / .

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-05-15 10:24:29 +10:00
David Howells
fd75815f72 KEYS: Add invalidation support
Add support for invalidating a key - which renders it immediately invisible to
further searches and causes the garbage collector to immediately wake up,
remove it from keyrings and then destroy it when it's no longer referenced.

It's better not to do this with keyctl_revoke() as that marks the key to start
returning -EKEYREVOKED to searches when what is actually desired is to have the
key refetched.

To invalidate a key the caller must be granted SEARCH permission by the key.
This may be too strict.  It may be better to also permit invalidation if the
caller has any of READ, WRITE or SETATTR permission.

The primary use for this is to evict keys that are cached in special keyrings,
such as the DNS resolver or an ID mapper.

Signed-off-by: David Howells <dhowells@redhat.com>
2012-05-11 10:56:56 +01:00
David Howells
31d5a79d7f KEYS: Do LRU discard in full keyrings
Do an LRU discard in keyrings that are full rather than returning ENFILE.  To
perform this, a time_t is added to the key struct and updated by the creation
of a link to a key and by a key being found as the result of a search.  At the
completion of a successful search, the keyrings in the path between the root of
the search and the first found link to it also have their last-used times
updated.

Note that discarding a link to a key from a keyring does not necessarily
destroy the key as there may be references held by other places.

An alternate discard method that might suffice is to perform FIFO discard from
the keyring, using the spare 2-byte hole in the keylist header as the index of
the next link to be discarded.

This is useful when using a keyring as a cache for DNS results or foreign
filesystem IDs.


This can be tested by the following.  As root do:

	echo 1000 >/proc/sys/kernel/keys/root_maxkeys

	kr=`keyctl newring foo @s`
	for ((i=0; i<2000; i++)); do keyctl add user a$i a $kr; done

Without this patch ENFILE should be reported when the keyring fills up.  With
this patch, the keyring discards keys in an LRU fashion.  Note that the stored
LRU time has a granularity of 1s.

After doing this, /proc/key-users can be observed and should show that most of
the 2000 keys have been discarded:

	[root@andromeda ~]# cat /proc/key-users
	    0:   517 516/516 513/1000 5249/20000

The "513/1000" here is the number of quota-accounted keys present for this user
out of the maximum permitted.

In /proc/keys, the keyring shows the number of keys it has and the number of
slots it has allocated:

	[root@andromeda ~]# grep foo /proc/keys
	200c64c4 I--Q--     1 perm 3b3f0000     0     0 keyring   foo: 509/509

The maximum is (PAGE_SIZE - header) / key pointer size.  That's typically 509
on a 64-bit system and 1020 on a 32-bit system.

Signed-off-by: David Howells <dhowells@redhat.com>
2012-05-11 10:56:56 +01:00
David Howells
233e4735f2 KEYS: Permit in-place link replacement in keyring list
Make use of the previous patch that makes the garbage collector perform RCU
synchronisation before destroying defunct keys.  Key pointers can now be
replaced in-place without creating a new keyring payload and replacing the
whole thing as the discarded keys will not be destroyed until all currently
held RCU read locks are released.

If the keyring payload space needs to be expanded or contracted, then a
replacement will still need allocating, and the original will still have to be
freed by RCU.

Signed-off-by: David Howells <dhowells@redhat.com>
2012-05-11 10:56:56 +01:00
David Howells
65d87fe68a KEYS: Perform RCU synchronisation on keys prior to key destruction
Make the keys garbage collector invoke synchronize_rcu() prior to destroying
keys with a zero usage count.  This means that a key can be examined under the
RCU read lock in the safe knowledge that it won't get deallocated until after
the lock is released - even if its usage count becomes zero whilst we're
looking at it.

This is useful in keyring search vs key link.  Consider a keyring containing a
link to a key.  That link can be replaced in-place in the keyring without
requiring an RCU copy-and-replace on the keyring contents without breaking a
search underway on that keyring when the displaced key is released, provided
the key is actually destroyed only after the RCU read lock held by the search
algorithm is released.

This permits __key_link() to replace a key without having to reallocate the key
payload.  A key gets replaced if a new key being linked into a keyring has the
same type and description.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
2012-05-11 10:56:56 +01:00
David Howells
1eb1bcf5bf KEYS: Announce key type (un)registration
Announce the (un)registration of a key type in the core key code rather than
in the callers.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Mimi Zohar <zohar@us.ibm.com>
2012-05-11 10:56:56 +01:00
David Howells
9f7ce8e249 KEYS: Reorganise keys Makefile
Reorganise the keys directory Makefile to put all the core bits together and
the type-specific bits after.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Mimi Zohar <zohar@us.ibm.com>
2012-05-11 10:56:56 +01:00
David Howells
f0894940ae KEYS: Move the key config into security/keys/Kconfig
Move the key config into security/keys/Kconfig as there are going to be a lot
of key-related options.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Mimi Zohar <zohar@us.ibm.com>
2012-05-11 10:56:56 +01:00
Pablo Neira Ayuso
d16cf20e2f netfilter: remove ip_queue support
This patch removes ip_queue support which was marked as obsolete
years ago. The nfnetlink_queue modules provides more advanced
user-space packet queueing mechanism.

This patch also removes capability code included in SELinux that
refers to ip_queue. Otherwise, we break compilation.

Several warning has been sent regarding this to the mailing list
in the past month without anyone rising the hand to stop this
with some strong argument.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2012-05-08 20:25:42 +02:00
James Morris
898bfc1d46 Linux 3.4-rc5
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQEcBAABAgAGBQJPnb50AAoJEHm+PkMAQRiGAE0H/A4zFZIUGmF3miKPDYmejmrZ
 oVDYxVAu6JHjHWhu8E3VsinvyVscowjV8dr15eSaQzmDmRkSHAnUQ+dB7Di7jLC2
 MNopxsWjwyZ8zvvr3rFR76kjbWKk/1GYytnf7GPZLbJQzd51om2V/TY/6qkwiDSX
 U8Tt7ihSgHAezefqEmWp2X/1pxDCEt+VFyn9vWpkhgdfM1iuzF39MbxSZAgqDQ/9
 JJrBHFXhArqJguhENwL7OdDzkYqkdzlGtS0xgeY7qio2CzSXxZXK4svT6FFGA8Za
 xlAaIvzslDniv3vR2ZKd6wzUwFHuynX222hNim3QMaYdXm012M+Nn1ufKYGFxI0=
 =4d4w
 -----END PGP SIGNATURE-----

Merge tag 'v3.4-rc5' into next

Linux 3.4-rc5

Merge to pull in prerequisite change for Smack:
86812bb0de

Requested by Casey.
2012-05-04 12:46:40 +10:00
Eric W. Biederman
18815a1808 userns: Convert capabilities related permsion checks
- Use uid_eq when comparing kuids
  Use gid_eq when comparing kgids
- Use make_kuid(user_ns, 0) to talk about the user_namespace root uid

Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-05-03 03:28:40 -07:00
Eric W. Biederman
078de5f706 userns: Store uid and gid values in struct cred with kuid_t and kgid_t types
cred.h and a few trivial users of struct cred are changed.  The rest of the users
of struct cred are left for other patches as there are too many changes to make
in one go and leave the change reviewable.  If the user namespace is disabled and
CONFIG_UIDGID_STRICT_TYPE_CHECKS are disabled the code will contiue to compile
and behave correctly.

Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-05-03 03:28:38 -07:00
Eric W. Biederman
ae2975bc34 userns: Convert group_info values from gid_t to kgid_t.
As a first step to converting struct cred to be all kuid_t and kgid_t
values convert the group values stored in group_info to always be
kgid_t values.   Unless user namespaces are used this change should
have no effect.

Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-05-03 03:27:21 -07:00
Eric W. Biederman
783291e690 userns: Simplify the user_namespace by making userns->creator a kuid.
- Transform userns->creator from a user_struct reference to a simple
  kuid_t, kgid_t pair.

  In cap_capable this allows the check to see if we are the creator of
  a namespace to become the classic suser style euid permission check.

  This allows us to remove the need for a struct cred in the mapping
  functions and still be able to dispaly the user namespace creators
  uid and gid as 0.

- Remove the now unnecessary delayed_work in free_user_ns.

  All that is left for free_user_ns to do is to call kmem_cache_free
  and put_user_ns.  Those functions can be called in any context
  so call them directly from free_user_ns removing the need for delayed work.

Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-04-26 02:00:59 -07:00
Dan Carpenter
08162e6a23 Yama: remove an unused variable
GCC complains that we don't use "one" any more after 389da25f93 "Yama:
add additional ptrace scopes".

security/yama/yama_lsm.c:322:12: warning: ?one? defined but not used
	[-Wunused-variable]

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-23 17:20:22 +10:00
Kees Cook
389da25f93 Yama: add additional ptrace scopes
This expands the available Yama ptrace restrictions to include two more
modes. Mode 2 requires CAP_SYS_PTRACE for PTRACE_ATTACH, and mode 3
completely disables PTRACE_ATTACH (and locks the sysctl).

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-19 13:39:56 +10:00
Jonghwan Choi
51b79bee62 security: fix compile error in commoncap.c
Add missing "personality.h"
security/commoncap.c: In function 'cap_bprm_set_creds':
security/commoncap.c:510: error: 'PER_CLEAR_ON_SETID' undeclared (first use in this function)
security/commoncap.c:510: error: (Each undeclared identifier is reported only once
security/commoncap.c:510: error: for each function it appears in.)

Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-19 12:56:39 +10:00
Eric Paris
d52fc5dde1 fcaps: clear the same personality flags as suid when fcaps are used
If a process increases permissions using fcaps all of the dangerous
personality flags which are cleared for suid apps should also be cleared.
Thus programs given priviledge with fcaps will continue to have address space
randomization enabled even if the parent tried to disable it to make it
easier to attack.

Signed-off-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-18 12:37:56 +10:00
Casey Schaufler
86812bb0de Smack: move label list initialization
A kernel with Smack enabled will fail if tmpfs has xattr support.

Move the initialization of predefined Smack label
list entries to the LSM initialization from the
smackfs setup. This became an issue when tmpfs
acquired xattr support, but was never correct.

Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-18 12:02:28 +10:00
John Johansen
c29bceb396 Fix execve behavior apparmor for PR_{GET,SET}_NO_NEW_PRIVS
Add support for AppArmor to explicitly fail requested domain transitions
if NO_NEW_PRIVS is set and the task is not unconfined.

Transitions from unconfined are still allowed because this always results
in a reduction of privileges.

Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Will Drewry <wad@chromium.org>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Andy Lutomirski <luto@amacapital.net>

v18: new acked-by, new description
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-14 11:13:18 +10:00
Andy Lutomirski
259e5e6c75 Add PR_{GET,SET}_NO_NEW_PRIVS to prevent execve from granting privs
With this change, calling
  prctl(PR_SET_NO_NEW_PRIVS, 1, 0, 0, 0)
disables privilege granting operations at execve-time.  For example, a
process will not be able to execute a setuid binary to change their uid
or gid if this bit is set.  The same is true for file capabilities.

Additionally, LSM_UNSAFE_NO_NEW_PRIVS is defined to ensure that
LSMs respect the requested behavior.

To determine if the NO_NEW_PRIVS bit is set, a task may call
  prctl(PR_GET_NO_NEW_PRIVS, 0, 0, 0, 0);
It returns 1 if set and 0 if it is not set. If any of the arguments are
non-zero, it will return -1 and set errno to -EINVAL.
(PR_SET_NO_NEW_PRIVS behaves similarly.)

This functionality is desired for the proposed seccomp filter patch
series.  By using PR_SET_NO_NEW_PRIVS, it allows a task to modify the
system call behavior for itself and its child tasks without being
able to impact the behavior of a more privileged task.

Another potential use is making certain privileged operations
unprivileged.  For example, chroot may be considered "safe" if it cannot
affect privileged tasks.

Note, this patch causes execve to fail when PR_SET_NO_NEW_PRIVS is
set and AppArmor is in use.  It is fixed in a subsequent patch.

Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Will Drewry <wad@chromium.org>
Acked-by: Eric Paris <eparis@redhat.com>
Acked-by: Kees Cook <keescook@chromium.org>

v18: updated change desc
v17: using new define values as per 3.4
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-14 11:13:18 +10:00
Kees Cook
923e9a1399 Smack: build when CONFIG_AUDIT not defined
This fixes builds where CONFIG_AUDIT is not defined and
CONFIG_SECURITY_SMACK=y.

This got introduced by the stack-usage reducation commit 48c62af68a
("LSM: shrink the common_audit_data data union").

Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-10 16:14:40 -07:00
Eric Paris
c737f8284c SELinux: remove unused common_audit_data in flush_unauthorized_files
We don't need this variable and it just eats stack space.  Remove it.

Signed-off-by: Eric Paris <eparis@redhat.com>
2012-04-09 12:23:57 -04:00
Wanlong Gao
562c99f20d SELinux: avc: remove the useless fields in avc_add_callback
avc_add_callback now just used for registering reset functions
in initcalls, and the callback functions just did reset operations.
So, reducing the arguments to only one event is enough now.

Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2012-04-09 12:23:44 -04:00
Wanlong Gao
0b36e44cc6 SELinux: replace weak GFP_ATOMIC to GFP_KERNEL in avc_add_callback
avc_add_callback now only called from initcalls, so replace the
weak GFP_ATOMIC to GFP_KERNEL, and mark this function __init
to make a warning when not been called from initcalls.

Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2012-04-09 12:23:07 -04:00
Eric Paris
899838b25f SELinux: unify the selinux_audit_data and selinux_late_audit_data
We no longer need the distinction.  We only need data after we decide to do an
audit.  So turn the "late" audit data into just "data" and remove what we
currently have as "data".

Signed-off-by: Eric Paris <eparis@redhat.com>
2012-04-09 12:23:06 -04:00
Eric Paris
1d34929271 SELinux: remove auditdeny from selinux_audit_data
It's just takin' up space.

Signed-off-by: Eric Paris <eparis@redhat.com>
2012-04-09 12:23:05 -04:00
Eric Paris
50c205f5e5 LSM: do not initialize common_audit_data to 0
It isn't needed.  If you don't set the type of the data associated with
that type it is a pretty obvious programming bug.  So why waste the cycles?

Signed-off-by: Eric Paris <eparis@redhat.com>
2012-04-09 12:23:04 -04:00
Eric Paris
07f62eb66c LSM: BUILD_BUG_ON if the common_audit_data union ever grows
We did a lot of work to shrink the common_audit_data.  Add a BUILD_BUG_ON
so future programers (let's be honest, probably me) won't do something
foolish like make it large again!

Signed-off-by: Eric Paris <eparis@redhat.com>
2012-04-09 12:23:03 -04:00
Eric Paris
b466066f9b LSM: remove the task field from common_audit_data
There are no legitimate users.  Always use current and get back some stack
space for the common_audit_data.

Signed-off-by: Eric Paris <eparis@redhat.com>
2012-04-09 12:23:03 -04:00
Eric Paris
0972c74ecb apparmor: move task from common_audit_data to apparmor_audit_data
apparmor is the only LSM that uses the common_audit_data tsk field.
Instead of making all LSMs pay for the stack space move the aa usage into
the apparmor_audit_data.

Signed-off-by: Eric Paris <eparis@redhat.com>
2012-04-09 12:23:02 -04:00
Eric Paris
bd5e50f9c1 LSM: remove the COMMON_AUDIT_DATA_INIT type expansion
Just open code it so grep on the source code works better.

Signed-off-by: Eric Paris <eparis@redhat.com>
2012-04-09 12:23:01 -04:00
Eric Paris
d4cf970d07 SELinux: move common_audit_data to a noinline slow path function
selinux_inode_has_perm is a hot path.  Instead of declaring the
common_audit_data on the stack move it to a noinline function only used in
the rare case we need to send an audit message.

Signed-off-by: Eric Paris <eparis@redhat.com>
2012-04-09 12:23:00 -04:00
Eric Paris
602a8dd6ea SELinux: remove inode_has_perm_noadp
Both callers could better be using file_has_perm() to get better audit
results.

Signed-off-by: Eric Paris <eparis@redhat.com>
2012-04-09 12:23:00 -04:00
Eric Paris
2e33405785 SELinux: delay initialization of audit data in selinux_inode_permission
We pay a rather large overhead initializing the common_audit_data.
Since we only need this information if we actually emit an audit
message there is little need to set it up in the hot path.  This patch
splits the functionality of avc_has_perm() into avc_has_perm_noaudit(),
avc_audit_required() and slow_avc_audit().  But we take care of setting
up to audit between required() and the actual audit call.  Thus saving
measurable time in a hot path.

Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Eric Paris <eparis@redhat.com>
2012-04-09 12:22:59 -04:00
Eric Paris
154c50ca4e SELinux: if sel_make_bools errors don't leave inconsistent state
We reset the bool names and values array to NULL, but do not reset the
number of entries in these arrays to 0.  If we error out and then get back
into this function we will walk these NULL pointers based on the belief
that they are non-zero length.

Signed-off-by: Eric Paris <eparis@redhat.com>
cc: stable@kernel.org
2012-04-09 12:22:58 -04:00
Eric Paris
92ae9e82d9 SELinux: remove needless sel_div function
I'm not really sure what the idea behind the sel_div function is, but it's
useless.  Since a and b are both unsigned, it's impossible for a % b < 0.
That means that part of the function never does anything.  Thus it's just a
normal /.  Just do that instead.  I don't even understand what that operation
was supposed to mean in the signed case however....

If it was signed:
sel_div(-2, 4) == ((-2 / 4) - ((-2 % 4) < 0))
		  ((0)      - ((-2)     < 0))
		  ((0)      - (1))
		  (-1)

What actually happens:
sel_div(-2, 4) == ((18446744073709551614 / 4) - ((18446744073709551614 % 4) < 0))
		  ((4611686018427387903)      - ((2 < 0))
		  (4611686018427387903        - 0)
		  ((unsigned int)4611686018427387903)
		  (4294967295)

Neither makes a whole ton of sense to me.  So I'm getting rid of the
function entirely.

Signed-off-by: Eric Paris <eparis@redhat.com>
2012-04-09 12:22:57 -04:00