Commit Graph

22 Commits

Author SHA1 Message Date
Wanpeng Li
56cc2406d6 KVM: nVMX: fix "acknowledge interrupt on exit" when APICv is in use
After commit 77b0f5d (KVM: nVMX: Ack and write vector info to intr_info
if L1 asks us to), "Acknowledge interrupt on exit" behavior can be
emulated. To do so, KVM will ask the APIC for the interrupt vector if
during a nested vmexit if VM_EXIT_ACK_INTR_ON_EXIT is set.  With APICv,
kvm_get_apic_interrupt would return -1 and give the following WARNING:

Call Trace:
 [<ffffffff81493563>] dump_stack+0x49/0x5e
 [<ffffffff8103f0eb>] warn_slowpath_common+0x7c/0x96
 [<ffffffffa059709a>] ? nested_vmx_vmexit+0xa4/0x233 [kvm_intel]
 [<ffffffff8103f11a>] warn_slowpath_null+0x15/0x17
 [<ffffffffa059709a>] nested_vmx_vmexit+0xa4/0x233 [kvm_intel]
 [<ffffffffa0594295>] ? nested_vmx_exit_handled+0x6a/0x39e [kvm_intel]
 [<ffffffffa0537931>] ? kvm_apic_has_interrupt+0x80/0xd5 [kvm]
 [<ffffffffa05972ec>] vmx_check_nested_events+0xc3/0xd3 [kvm_intel]
 [<ffffffffa051ebe9>] inject_pending_event+0xd0/0x16e [kvm]
 [<ffffffffa051efa0>] vcpu_enter_guest+0x319/0x704 [kvm]

To fix this, we cannot rely on the processor's virtual interrupt delivery,
because "acknowledge interrupt on exit" must only update the virtual
ISR/PPR/IRR registers (and SVI, which is just a cache of the virtual ISR)
but it should not deliver the interrupt through the IDT.  Thus, KVM has
to deliver the interrupt "by hand", similar to the treatment of EOI in
commit fc57ac2c9c (KVM: lapic: sync highest ISR to hardware apic on
EOI, 2014-05-14).

The patch modifies kvm_cpu_get_interrupt to always acknowledge an
interrupt; there are only two callers, and the other is not affected
because it is never reached with kvm_apic_vid_enabled() == true.  Then it
modifies apic_set_isr and apic_clear_irr to update SVI and RVI in addition
to the registers.

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Suggested-by: "Zhang, Yang Z" <yang.z.zhang@intel.com>
Tested-by: Liu, RongrongX <rongrongx.liu@intel.com>
Tested-by: Felipe Reyes <freyes@suse.com>
Fixes: 77b0f5d67f
Cc: stable@vger.kernel.org
Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-05 15:00:24 +02:00
Bandan Das
77b0f5d67f KVM: nVMX: Ack and write vector info to intr_info if L1 asks us to
This feature emulates the "Acknowledge interrupt on exit" behavior.
We can safely emulate it for L1 to run L2 even if L0 itself has it
disabled (to run L1).

Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2014-04-22 18:41:33 -03:00
Yang Zhang
c7c9c56ca2 x86, apicv: add virtual interrupt delivery support
Virtual interrupt delivery avoids KVM to inject vAPIC interrupts
manually, which is fully taken care of by the hardware. This needs
some special awareness into existing interrupr injection path:

- for pending interrupt, instead of direct injection, we may need
  update architecture specific indicators before resuming to guest.

- A pending interrupt, which is masked by ISR, should be also
  considered in above update action, since hardware will decide
  when to inject it at right time. Current has_interrupt and
  get_interrupt only returns a valid vector from injection p.o.v.

Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-01-29 10:48:19 +02:00
Gleb Natapov
e11ae1a102 KVM: remove unused variable.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-12-14 23:07:44 -02:00
Gleb Natapov
f3200d00ea KVM: inject ExtINT interrupt before APIC interrupts
According to Intel SDM Volume 3 Section 10.8.1 "Interrupt Handling with
the Pentium 4 and Intel Xeon Processors" and Section 10.8.2 "Interrupt
Handling with the P6 Family and Pentium Processors" ExtINT interrupts are
sent directly to the processor core for handling. Currently KVM checks
APIC before it considers ExtINT interrupts for injection which is
backwards from the spec. Make code behave according to the SDM.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Acked-by: "Zhang, Yang Z" <yang.z.zhang@intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-12-13 23:05:21 -02:00
Nicolas Kaiser
9611c18777 KVM: fix typo in copyright notice
Fix typo in copyright notice.

Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24 10:53:14 +02:00
Jason Wang
23e7a7944f KVM: pit: Do not check pending pit timer in vcpu thread
Pit interrupt injection was done by workqueue, so no need to check
pending pit timer in vcpu thread which could lead unnecessary
unblocking of vcpu.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:51:45 +02:00
Chris Lalancette
33572ac0ad KVM: x86: Introduce a workqueue to deliver PIT timer interrupts
We really want to "kvm_set_irq" during the hrtimer callback,
but that is risky because that is during interrupt context.
Instead, offload the work to a workqueue, which is a bit safer
and should provide most of the same functionality.

Signed-off-by: Chris Lalancette <clalance@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01 10:46:49 +03:00
Avi Kivity
221d059d15 KVM: Update Red Hat copyrights
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:35:51 +03:00
Gleb Natapov
923c61bbc6 KVM: Remove irq_pending bitmap
Only one interrupt vector can be injected from userspace irqchip at
any given time so no need to store it in a bitmap. Put it into interrupt
queue directly.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:57 +03:00
Gleb Natapov
8061823a25 KVM: Make kvm_cpu_(has|get)_interrupt() work for userspace irqchip too
At the vector level, kernel and userspace irqchip are fairly similar.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:45 +03:00
Marcelo Tosatti
b682b814e3 KVM: x86: fix LAPIC pending count calculation
Simplify LAPIC TMCCT calculation by using hrtimer provided
function to query remaining time until expiration.

Fixes host hang with nested ESX.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-02-15 02:47:38 +02:00
Xiantao Zhang
3de42dc094 KVM: Separate irq ack notification out of arch/x86/kvm/irq.c
Moving irq ack notification logic as common, and make
it shared with ia64 side.

Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-10-15 14:25:35 +02:00
Marcelo Tosatti
3cf57fed21 KVM: PIT: fix injection logic and count
The PIT injection logic is problematic under the following cases:

1) If there is a higher priority vector to be delivered by the time
kvm_pit_timer_intr_post is invoked ps->inject_pending won't be set.
This opens the possibility for missing many PIT event injections (say if
guest executes hlt at this point).

2) ps->inject_pending is racy with more than two vcpus. Since there's no locking
around read/dec of pt->pending, two vcpu's can inject two interrupts for a single
pt->pending count.

Fix 1 by using an irq ack notifier: only reinject when the previous irq
has been acked. Fix 2 with appropriate locking around manipulation of
pending count and irq_ack by the injection / ack paths.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-10-15 10:15:17 +02:00
Marcelo Tosatti
f52447261b KVM: irq ack notification
Based on a patch from: Ben-Ami Yassour <benami@il.ibm.com>
which was based on a patch from: Amit Shah <amit.shah@qumranet.com>

Notify IRQ acking on PIC/APIC emulation. The previous patch missed two things:

- Edge triggered interrupts on IOAPIC
- PIC reset with IRR/ISR set should be equivalent to ack (LAPIC probably
needs something similar).

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
CC: Amit Shah <amit.shah@qumranet.com>
CC: Ben-Ami Yassour <benami@il.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-10-15 10:15:16 +02:00
Avi Kivity
564f15378f KVM: Add irq ack notifier list
This can be used by kvm subsystems that are interested in when
interrupts are acked, for example time drift compensation.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-10-15 10:15:16 +02:00
Amit Shah
867767a365 KVM: Introduce kvm_set_irq to inject interrupts in guests
This function injects an interrupt into the guest given the kvm struct,
the (guest) irq number and the interrupt level.

Signed-off-by: Amit Shah <amit.shah@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-10-15 10:15:12 +02:00
Marcelo Tosatti
2f5997140f KVM: migrate PIT timer
Migrate the PIT timer to the physical CPU which vcpu0 is scheduled on,
similarly to what is done for the LAPIC timers, otherwise PIT interrupts
will be delayed until an unrelated event causes an exit.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-06-06 21:25:51 +03:00
Marcelo Tosatti
3d80840d96 KVM: hlt emulation should take in-kernel APIC/PIT timers into account
Timers that fire between guest hlt and vcpu_block's add_wait_queue() are
ignored, possibly resulting in hangs.

Also make sure that atomic_inc and waitqueue_active tests happen in the
specified order, otherwise the following race is open:

CPU0                                        CPU1
                                            if (waitqueue_active(wq))
add_wait_queue()
if (!atomic_read(pit_timer->pending))
    schedule()
                                            atomic_inc(pit_timer->pending)

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27 12:04:11 +03:00
Sheng Yang
7837699fa6 KVM: In kernel PIT model
The patch moves the PIT model from userspace to kernel, and increases
the timer accuracy greatly.

[marcelo: make last_injected_time per-guest]

Signed-off-by: Sheng Yang <sheng.yang@intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Tested-and-Acked-by: Alex Davis <alex14641@yahoo.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27 12:00:21 +03:00
Zhang Xiantao
5736199afb KVM: Move kvm_vcpu_kick() to x86.c
Moving kvm_vcpu_kick() to x86.c. Since it should be
common for all archs, put its declarations in <linux/kvm_host.h>

Signed-off-by: Zhang Xiantao <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-01-30 18:01:19 +02:00
Avi Kivity
edf884172e KVM: Move arch dependent files to new directory arch/x86/kvm/
This paves the way for multiple architecture support.  Note that while
ioapic.c could potentially be shared with ia64, it is also moved.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-01-30 18:01:18 +02:00