Commit Graph

113 Commits

Author SHA1 Message Date
Linus Walleij
c8df9a53e8 [ARM] 5024/1: Fix some minor clk issues in the MMCI PL18x driver
This fixes some two minor clk issues.

The first is a comparison where a byte will probably wrap around to 0 instead of being saturated to 255, shouldn't be triggered very often but need fixing.

The second is an attempt by the driver to adjust MCLK down to the maximum frequency according to the spec, so we don't accidentally overclock the PL18x block. None of the mach-{versatile|integrator|lh7a40x} that use it in-tree seem to have a problem with this (all are well below 100MHz, typically 33MHz), but some day there will be a problem.

This is not applied on top of the earlier mmci patch for race condition but rather a clean 2.6.25, but I guess it applies without major protests anyway.

Signed-off-by: Linus Walleij <triad@df.lth.se>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-05-04 11:06:05 +01:00
Linus Torvalds
d973664992 Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm: (26 commits)
  [ARM] pxa: fix 1c104e0e4f
  [ARM] serial: s3c2410: platform_get_irq() may return signed unnoticed
  [ARM] am79c961a: platform_get_irq() may return signed unnoticed
  [ARM] Feroceon: Feroceon-specific WA-cache compatible {copy,clear}_user_page()
  [ARM] Feroceon: fix function alignment in proc-feroceon.S
  [ARM] Orion: catch a couple more alternative spellings of PCIe
  [ARM] Orion: fix orion-ehci platform resource end addresses
  [ARM] Orion: fix ->map_irq() PCIe bus number check
  [ARM] Orion: fix ioremap() optimization
  [ARM] feroceon: remove CONFIG_CPU_CACHE_ROUND_ROBIN check
  [ARM] feroceon: remove CONFIG_CPU_DCACHE_WRITETHROUGH check
  kprobes/arm: fix decoding of arithmetic immediate instructions
  kprobes/arm: fix cache flush address for instruction stub
  [ARM] 5022/1: Race in ARM MMCI PL18x driver, V2
  [ARM] 5021/1: at91: buildfix for sam9263 + PM
  [ARM] 5018/1: RealView: Fix the ARM11MPCore Oprofile compilation
  [ARM] 5016/1: AT91: typo in mci configuration for at91cap at91sam9263
  [ARM] 5017/1: pxa3xx: Report unsupported wakeup sources in pxa3xx_set_wake()
  [ARM] 5020/1: magician: remove __devinit marker from pasic3_leds_info
  [ARM] 5014/1: Cleanup reset state before entering suspend or resetting.
  ...
2008-04-29 15:18:06 -07:00
Harvey Harrison
48b2cf9e29 mmc: use get/put_unaligned_* helpers
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Tony Jones <tonyj@suse.de>
Cc: Pierre Ossman <drzeus@drzeus.cx>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:06:27 -07:00
Linus Walleij
26eed9a5c6 [ARM] 5022/1: Race in ARM MMCI PL18x driver, V2
Updated version of 4446/1. This also drops the suggested comparison
of host_remain for == 0, since that doesn't make sense (still works
for us, too). We have verified that this patch solve race problems
on atleast 2 archs at high frequencies.

(Verbatim copy of old patch text below.)

The patch below fixes a race condition in the ARM MMCI PL18x driver.

If new data arrives in the FIFO while existing data is being read then
we get a second iteration of the loop in mmci_pio_read.

However host->size is not updated until after mmci_pio_read returns,
so we get count = number of new bytes PLUS number of bytes already
copied in the first iteration. This results in a FIFO underrun as
we try and read mode data than is available.

The fix is to compensating for data read on previous iterations
when calculating the amount of data in the FIFO.

Signed-off-by: Linus Walleij <triad@df.lth.se>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-28 17:03:34 +01:00
Pierre Ossman
0b82684c3c sdhci: improve no card, no reset quirk
The quirk was meant to just inhibit some resets, but ended up blocking
all of them. Fortunately, this was just what was needed. Change the
comment to reflect reality.

Also, this issue has just been observed on Samsung laptops, so reduce
the number of chips the quirk affects.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-04-18 20:05:31 +02:00
Jarkko Lavinen
9d7c6eee52 MMC: OMAP: Do not busy wait for end of command for ever
The limit was a fixed 100k limit in the busy loop, which is not
accurate. It would better to have time limit for the worst case
which occurs when sending 80 cycles at 400 kHz and takes about
200 microseconds, so limit the max time spend in the busy loop
for some 250 microseconds.

Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-04-18 20:05:31 +02:00
Jarkko Lavinen
0f602ec79a MMC: OMAP: Start new commands from work queue instead of irq
Use work queues for starting new commands instead of starting them
directly from irq handler. The command scheduling needs to be delayed
a bit for some cards which should not be done from an interrupt.

Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-04-18 20:05:31 +02:00
Jarkko Lavinen
0807a9b573 MMC: OMAP: Lazy clock shutdown
MMCA spec says the mmc clock should be kept running for at least
8 cycles after the last RW request. Ensure this with lazy clock
disable after a request, or with an explicit delay before
switching a slot.

Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-04-18 20:05:31 +02:00
Jarkko Lavinen
0fb4723d40 MMC: OMAP: Move failing command abortion to workqueue
Abort failed command from workqueue rather than from an interrupt,
allowing longer delays in abortion.

Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-04-18 20:05:31 +02:00
Jarkko Lavinen
7584d276d4 MMC: OMAP: Use tasklet instead of workqueue for cover switch notification
The cover waitqueue is occasionally scheduled twice from timer
and the interrupt and oops follows. It would have been possible
to fix this problem with spinlocks but using tasklet was a dropin
solution with no need for locking.

This path also adds some cleanups.

Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-04-18 20:05:30 +02:00
Kyungmin Park
8348f0029d MMC: OMAP: Check the get_cover_state function pointer if not set
If the get_cover_state is not set, it occurs the oops.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-04-18 20:05:30 +02:00
Carlos Eduardo Aguiar
01e77e13fc MMC: OMAP: Using setup_timer instead of init_timer
Using setup_timer() instead of init_timer() on omap.c file.

Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-04-18 20:05:30 +02:00
Jarkko Lavinen
eb1860bccd MMC: OMAP: Abort stuck commands
When a card is removed while it is being accessed, a command can get stuck so
that no timeout or end of command interrupt ever occurs. The command getting
stuck is almost always CDM12, but also the other commands can get stuck. Catch
a stuck command with a timer and try sending the initialization stream until
the controller starts running again and responds with the end of command
status.

Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-04-18 20:05:30 +02:00
Juha Yrjola
2a50b8889b MMC: OMAP: General cleanup for MMC multislot support
General code cleanup, modifications at some dev_* functions and
other hacks at mmc_omap_irq() for MMC multislot support.

Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-04-18 20:05:29 +02:00
Juha Yrjola
65b5b6e51b MMC: OMAP: Power functions modified to MMC multislot support
Modifications at power functions to MMC multislot support. This patch
also move board-specific code out of MMC OMAP driver.

Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-04-18 20:05:29 +02:00
Juha Yrjola
b8f9f0e90a MMC: OMAP: Fix timeout calculation for MMC multislot support
Fix the data timeout calculation for MMC multislot support.

Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-04-18 20:05:29 +02:00
Juha Yrjola
a914ded235 MMC: OMAP: New release dma and abort xfer functions
New functions to support MMC multislot:
mmc_omap_release_dma() and mmc_omap_abort_xfer().

Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-04-18 20:05:29 +02:00
Juha Yrjola
5a0f3f1f71 MMC: OMAP: Add back cover switch support
This patch adds back MMC cover switch support in a way that
supports multiple slots.

Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-04-18 20:05:28 +02:00
Juha Yrjola
abfbe5f785 MMC: OMAP: Introduce new multislot structure and change driver to use it
Introduce new MMC multislot structure and change driver to use it.

Note that MMC clocking is now enabled in mmc_omap_select_slot()
and disabled in mmc_omap_release_slot().

Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-04-18 20:05:28 +02:00
Tony Lindgren
4bc9e35556 MMC: OMAP: Remove cover switch handling to allow adding multislot support
This patch removes the MMC cover switch handling temporarily
to make following multislot patches cleaner.

MMC cover switch handling will be added back in later patches
after adding basic multislot support.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-04-18 20:05:28 +02:00
Francisco Alecrim
d365abe27d MMC: OMAP: Fix the BYTEBLOCK capability removal
According with commit 255d01af9a
from Linux-OMAP tree, the BYTEBLOCK capability was removed by Pierre Ossman.
MMC_CAP_BYTEBLOCK is not defined causing the compile error:

drivers/mmc/host/omap.c: In function `mmc_omap_probe':
drivers/mmc/host/omap.c:1077: error: `MMC_CAP_BYTEBLOCK' undeclared (first use in this function)
drivers/mmc/host/omap.c:1077: error: (Each undeclared identifier is reported only once
drivers/mmc/host/omap.c:1077: error: for each function it appears in.)

Signed-off-by: Francisco Alecrim <francisco.alecrim@indt.org.br>
Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-04-18 20:05:27 +02:00
Tony Lindgren
ec2f362a91 MMC: OMAP: Remove extra divisor increase
As noted by Kyungmin Park, the divisor calculation has
an unnecessary increase.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-04-18 20:05:27 +02:00
Carlos Eduardo Aguiar
5ec21b1ccf MMC: OMAP: Remove some opcodes from host driver
This patch removes some opcodes from host driver so there's no need on putting
'#include <linux/mmc/mmc.h>', that should not be needed in host drivers.

Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-04-18 20:05:27 +02:00
Pierre Ossman
2f730fec83 sdhci: allow led to be controlled freely
Hook up the controller LED to the LED subsystem, allowing more flexible
control than simply indicating an ongoing request.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-04-18 20:05:27 +02:00
Pierre Ossman
b69c905890 sdhci: remove custom controller name
Remove the use of the sdhci specific device name and use the mmc controller
name instead.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-04-18 20:05:27 +02:00
Kay Sievers
bc65c724d5 mmc: fix platform driver hotplug/coldplug
Since 43cc71eed1, the platform modalias is
prefixed with "platform:".  Add MODULE_ALIAS() to the hotpluggable MMC host
platform drivers, to re-enable auto loading.

Also, add missing owner declarations in driver init.

[dbrownell@users.sourceforge.net: registration fixes]
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-15 19:35:40 -07:00
Roel Kluin
ce63645234 tifm_sd: DATA_CARRY is not boolean in tifm_sd_transfer_data()
DATA_CARRY is not boolean

Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-15 09:24:21 -07:00
Frank Seidel
882c49164d mmc: extend ricoh_mmc to support Ricoh RL5c476
This patch adds support for the Ricoh RL5c476 chip: with this
the mmc adapter that needs this disabler (R5C843) can also be
handled correctly when it sits on a RL5c476.

Signed-off-by: Frank Seidel <fseidel@suse.de>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-02-08 09:02:47 +01:00
David Brownell
6e996ee8e7 at91_mci: use generic GPIO calls
Update the AT91 MMC driver to use the generic GPIO calls instead of the
AT91-specific calls; and to request (and release) those GPIO signals.

That required updating the probe() fault cleanup codepaths.  Now there
is a single sequence for freeing resources, in reverse order of their
allocation.  Also that code uses use dev_*() for messaging, and has less
abuse of KERN_ERR.

Likewise with updating remove() cleanup.  This had to free the GPIOs,
and while adding that code I noticed and fixed two other problems:  it
was poking at a workqueue owned by the mmc core; and in one (rare)
case would try freeing an IRQ that it didn't allocate.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-02-08 09:02:47 +01:00
Feng Tang
541ceb5b8b sdhci: add num index for multi controllers case
Some devices have several controllers; need add the index info to
device slot name host->slot_desc[]

Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-02-08 09:02:47 +01:00
Pierre Ossman
34671dc2e6 mmc: remove sdhci and mmc_spi experimental markers
Both of these drivers work well (although some hardware still has
its problems) and are not in the "alpha" quality that EXPERIMENTAL
suggests.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-02-08 09:02:46 +01:00
Philip Langdale
1f090bf524 mmc: Handle suspend/resume in Ricoh MMC disabler
As pci config space is reinitialised on a suspend/resume cycle, the
disabler needs to work its magic at resume time. For symmetry this
change also explicitly enables the controller at suspend time but
it's not strictly necessary.

Signed-off-by: Philipl Langdale <philipl@overt.org>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-02-08 09:02:46 +01:00
Russell King
0ff66f0c7a Merge branch 'pxa-plat' into devel
* pxa-plat: (53 commits)
  [ARM] 4762/1: Basic support for Toradex Colibri module
  [ARM] pxa: fix mci_init functions returning -1
  [ARM] 4737/1: Refactor corgi_lcd to improve readability + bugfix
  [ARM] 4747/1: pcm027: support for pcm990 baseboard for phyCORE-PXA270
  [ARM] 4746/1: pcm027: network support for phyCORE-PXA270
  [ARM] 4745/1: pcm027: default configuration
  [ARM] 4744/1: pcm027: add support for phyCORE-PXA270 CPU module
  [NET] smc91x: Make smc91x use IRQ resource trigger flags
  [ARM] pxa: add default config for littleton
  [ARM] pxa: add basic support for Littleton (PXA3xx Form Factor Platform)
  [ARM] 4664/1: Add basic support for HTC Magician PDA phones
  [ARM] 4649/1: Base support for pxa-based Toshiba e-series PDAs.
  [ARM] pxa: skip registers saving/restoring if entering standby mode
  [ARM] pxa: fix PXA27x resume
  [ARM] pxa: Avoid fiddling with CKEN register on suspend
  [ARM] pxa: Add PXA3 standby code hooked into the IRQ wake scheme
  [ARM] pxa: Add zylonite MFP wakeup configurations
  [ARM] pxa: program MFPs for low power mode when suspending
  [ARM] pxa: make MFP configuration processor independent
  [ARM] pxa: remove un-used pxa3xx_mfp_set_xxx() functions
  ...

Conflicts:

	arch/arm/mach-pxa/ssp.c

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 13:21:38 +00:00
David Brownell
6d16bfb5e8 i2c/tps65010: move header to <linux/i2c/...>
Move the tps65010 header file from the OMAP arch directory to the
more generic <linux/i2c/...> directory, and remove the spurious
dependency of this driver on OMAP.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-01-27 18:14:49 +01:00
Bridge Wu
fafc9d3fa3 [ARM] pxa: mmc: add 1st host controller support for pxa3xx
This patchis to add the first mmc controller support for pxa3xx.
It's valid for pxa3[0|1|2]0.

On zylonite, the first controller supports two slots, this patch
only support the first one right now.

Signed-off-by: Bridge Wu <bridge.wu@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-26 15:07:53 +00:00
Bridge Wu
9a788c6b78 [ARM] 4711/1: pxa: mmc: move DMA specific code to platform layer
This patch is to move pxamci DMA specific code to corresponding
platform layer because using DRCMRRXMMC/DRCMRTXMMC in pxamci.c makes
the driver code dedicated to platform which is not extensible.

It is applicable to all pxa platforms.

Signed-off-by: Bridge Wu <bridge.wu@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-26 15:07:52 +00:00
Bridge Wu
64eb036af4 [ARM] 4709/1: pxa: mmc: add 26MHz support for pxa3[0|1]0 mmc controller
pxa3[0|1]0 mmc controller can support 26MHz clock mode, they support
SD spec 1.1 and MMC spec 4.0 which specify high speed mode. So host
caps will include MMC_CAP_MMC_HIGHSPEED and MMC_CAP_SD_HIGHSPEED for
pxa3[0|1]0.

This patch is to add 26MHz support for them. pxa host clock will be
set to 26MHz mode when the card supported max clock rate is higher
than or equal to 26MHz.

Signed-off-by: Bridge Wu <bridge.wu@marvell.com>
Acked-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-26 15:07:52 +00:00
Pierre Ossman
84c46a53fc sdhci: support JMicron JMB38x chips
The JMicron JMB38x chip doesn't support transfers that aren't 32-bit
aligned (both size and start address). It also doesn't like switching
between PIO and DMA mode, so it needs to be reset after each request.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-12-12 20:01:00 +01:00
Pierre Ossman
c9fddbc4f8 sdhci: use PIO when DMA can't satisfy the request
Some controllers have been designed on the assumption that all transfers
will be 32-bit aligned, both in start address and in size. This is not a
guarantee the SDHCI specification provides and not one we can provide.

Revert back to PIO for individual requests in order to work around the
hardware bug.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-12-12 20:01:00 +01:00
Pierre Ossman
c6573c9467 sdhci: don't warn about sdhci 2.0 controllers
We support 2.0 controllers, even though we don't use anything in the new
feature set.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-12-12 20:01:00 +01:00
Pierre Ossman
dc93441b3f sdhci: describe quirks
Add a comment for each quirk to describe what it does and why.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-12-12 20:01:00 +01:00
Marc Pignat
c24b2602af spi: use simplified spi_sync() calling convention
Given the patch which simplifies the spi_sync calling convention, this one
updates the callers of that routine which tried using it according to the
previous specification.  (Most didn't.)

Signed-off-by: Marc Pignat <marc.pignat@hevs.ch>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-05 09:21:19 -08:00
Alex Dubov
b37a05069b tifm_sd: handle non-power-of-2 block sizes
It is possible to handle arbitrary block sizes with tifm card reader by
conditionally switching to PIO in case such block has to be delivered. At
the beginning of each request, DMA is either disabled (non-power-of-2 block
size) or set to load time user preference.

Signed-off-by: Alex Dubov <oakad@yahoo.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-11-21 18:42:45 +01:00
Rolf Eike Beer
cee687ce4a Add missing "\n" to log message
Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-11-10 11:59:49 +01:00
Russell King
d8cb70d10a [ARM] Fix pxamci regression
Fix:

WARNING: at arch/arm/mach-pxa/clock.c:69 clk_disable()
[<c002d7c8>] (dump_stack+0x0/0x14) from [<c00334f4>] (clk_disable+0x34/0xa0)
[<c00334c0>] (clk_disable+0x0/0xa0) from [<c028a43c>] (pxamci_set_ios+0x74/0xf0)
[<c028a3c8>] (pxamci_set_ios+0x0/0xf0) from [<c0281548>] (mmc_power_off+0x90/0x9c)
[<c02814b8>] (mmc_power_off+0x0/0x9c) from [<c0281a30>] (mmc_start_host+0x18/0x28)
[<c0281a18>] (mmc_start_host+0x0/0x28) from [<c02825a0>] (mmc_add_host+0xe8/0x104)
[<c02824b8>] (mmc_add_host+0x0/0x104) from [<c028a7d0>] (pxamci_probe+0x24c/0x2f4)
[<c028a584>] (pxamci_probe+0x0/0x2f4) from [<c01e5948>] (platform_drv_probe+0x20/0x24)
...

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-31 15:21:39 +00:00
Pavel Pisa
e1efa2a3ea Correction of "Update drivers to use sg helpers" patch for IMXMMC driver
The previous change omits "data->" prefix
in the "data->sg" case. This change fixes kernel
compilation.

Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>

 drivers/mmc/host/imxmmc.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
Signed-off-by: Jens Axboe <axboe@carl.home.kernel.dk>
2007-10-29 09:18:04 +01:00
Al Viro
0ada7a02ad scatterlist fallout: mmc
#include <scatterlist/scatterlist.h>
is an odd thing to do...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-27 22:18:12 -07:00
David Brownell
460cd0589d mmc_spi: Fix mmc-over-spi regression
Patch 49dce689ad changed the sysfs data
structures for SPI in a way which broke the MMC-over-SPI host driver.

This patch fixes that regression by changing the scheme used to keep
from knowingly trying to use a shared bus segment, and updates the
adjacent comments slightly to better explain the issue.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-10-27 14:47:20 +02:00
Pierre Ossman
6356a9d955 at91_mci: Fix bad reference
The flags parameter got removed in a previous commit, but some
references were overlooked.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-10-27 14:04:10 +02:00
Jens Axboe
bd6dee6f30 mmc: sg fallout
Do a full scan of the directory to try and be a bit more proactive,
instead of waiting for things to break.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-24 09:01:09 +02:00