Commit Graph

34 Commits

Author SHA1 Message Date
Ben Hutchings
906bb26c06 sfc: Update version, copyright dates, authors
This driver has been mostly rewritten since Michael Brown's initial
work, so swap the order of the authors.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-29 17:23:58 -08:00
Ben Hutchings
744093c983 sfc: Rename falcon.h to nic.h
nic.h is no longer specific to Falcon.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-29 17:23:55 -08:00
Ben Hutchings
c1c4f453b6 sfc: Remove static PHY data and enumerations
New NICs have firmware managing the PHY, and we will discover the PHY
capabilities at run-time.  Replace the static data with probe() and
test_name() operations.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-29 17:23:53 -08:00
Ben Hutchings
e58f69f408 sfc: Extend loopback mode enumeration
New NICs and PHYs support a wider variety of loopback modes.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-29 17:23:53 -08:00
Ben Hutchings
d3245b28ef sfc: Refactor link configuration
Refactor PHY, MAC and NIC configuration operations so that the
existing link configuration can be re-pushed with:

	efx->phy_op->reconfigure(efx);
	efx->mac_op->reconfigure(efx);

and a new configuration with:

	efx->nic_op->reconfigure_port(efx);

(plus locking and error-checking).

We have not held the link settings in software (aside from flow
control), and have relied on asking the hardware what they are.  This
is a problem because in some cases the hardware may no longer be in a
state to tell us.  In particular, if an entire multi-port board is
reset through one port, the driver bindings to other ports have no
chance to save settings before recovering.

We only actually need to keep track of the autonegotiation settings,
so add an ethtool advertising mask to struct efx_nic, initialise it
in PHY init and update it as necessary.

Remove now-unneeded uses of efx_phy_op::{get,set}_settings() and
struct ethtool_cmd.

Much of this was done by Steve Hodgson <shodgson@solarflare.com>.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-29 16:46:28 -08:00
Ben Hutchings
4b0d29dcfc sfc: Turn pause frame generation on and off at the MAC, not the RX FIFO
Pause frame generation is gated by both RX_XOFF_MAC_EN and an enable
bit in each MAC.  RX_XOFF_MAC_EN bit always reads back as 0 so we need
to set it correctly every time we modify RX_CFG_REG.  Simplify this by
always setting it to 1 and only changing the enable bits in the MACs.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-29 16:46:26 -08:00
Ben Hutchings
daeda6309e sfc: Decouple NIC revision number from Falcon PCI revision number
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-28 23:58:54 -08:00
Ben Hutchings
9007b9fa36 sfc: Simplify XMAC link polling
From: Steve Hodgson <shodgson@solarflare.com>

Only the XMAC on Falcon needs help from the driver to poll and reset
the MAC-PHY link (XAUI); GMII is a simple parallel bus and on later
NICs firmware takes care of the XAUI link.  Also, an XMAC interrupt
currently schedules a work item which simply clears a flag
(efx_nic::mac_up) to be checked by the regular monitor (or the next
link reconfiguration, if that is sooner).

Rename the flag to xmac_poll_required, changing its sense.  Remove the
needless indirection and just set the flag immediately.  Call
falcon_xmac_poll() directly where required.

Add a new generic operation mac_op::check_fault to check the link
outside of regular monitoring, as required during self-tests.

(Note that this leaves us with an unused work item, but we will
immediately have another use for it.)

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-26 15:59:43 -08:00
Ben Hutchings
55edc6e6ff sfc: Split MAC stats DMA initiation and completion
From: Steve Hodgson <shodgson@solarflare.com>

Currently we initiate MAC stats DMA and busy-wait for completion when
stats are requested.  We can improve on this with a periodic timer to
initiate and poll for stats, and opportunistically poll when stats are
requested.

Since efx_nic::stats_disable_count and efx_stats_{disable,enable}()
are Falcon-specific, rename them and move them accordingly.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-26 15:59:36 -08:00
Ben Hutchings
80cb9a0f7f sfc: Treat all MAC registers as 128-bit
Although all the defined fields in these registers are within 32 bits,
they are architecturally defined as 128-bit like most other Falcon
registers.  In particular, we must use efx_reado() to ensure proper
locking when reading MD_STAT_REG.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-26 15:59:00 -08:00
Ben Hutchings
eb50c0d67f sfc: Gather link state fields in struct efx_nic into new struct efx_link_state
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-24 10:58:53 -08:00
Ben Hutchings
12d00cadcc sfc: Rename register I/O header and functions used by both Falcon and Siena
While we're at it, use type suffixes of 'd', 'q' and 'o', consistent
with register type names.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-24 04:27:04 -07:00
Ben Hutchings
3e6c453854 sfc: Update hardware definitions for Siena
Siena is still based on the Falcon hardware architecture and will
share many of these definitions, so replace falcon_hwdefs.h with
regs.h.

The new definitions have been generated according to a naming
convention which incorporates the type and revision information.
Update the code accordingly.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-24 04:27:03 -07:00
Ben Hutchings
5087b54ddc sfc: Remove boards.h, moving last remaining declaration to falcon.h
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-24 04:26:56 -07:00
Ben Hutchings
d4ec09acdb sfc: Do not reinitialise XAUI serdes before it has completed reset
falcon_reset_xaui() waits for XGXS reset to complete, but the XAUI
serdes reset may take longer.  It needs to check both reset active
bits.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-26 17:38:51 -07:00
Ben Hutchings
68e7f45e11 sfc: Use generic MDIO functions and definitions
Make use of the newly-added generic MDIO clause 45 support and remove
redundant definitions.

Add an 'efx_' prefix to the remaining driver-specific MDIO functions
and remove arguments which are redundant with efx->mdio.prtad.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-29 17:32:30 -07:00
Ben Hutchings
766ca0fa6b sfc: Rework MAC, PHY and board event handling
From: Steve Hodgson <shodgson@solarflare.com>

MAC, PHY and board events may be separately enabled and signalled.
Our current arrangement of chaining the polling functions can result
in events being missed.  Change them to be more independent.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-12 21:59:24 -08:00
Ben Hutchings
04cc8cacb0 sfc: Implement auto-negotiation
Add infrastructure for auto-negotiation of speed, duplex and flow
control.

When using 10Xpress, auto-negotiate flow control.  While we're
at it, clean up the code to warn when partner is not 10GBASE-T
capable.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-12 21:58:17 -08:00
Ben Hutchings
177dfcd80f sfc: Add support for sub-10G speeds
The SFC4000 has a separate MAC for use at sub-10G speeds.  Introduce
an efx_mac_operations structure with implementations for the two MACs.
Switch between the MACs as necessary.

PHY settings are independent of the MAC, so add get_settings() and
set_settings() to efx_phy_operations.  Also add macs field to indicate
which MACs the PHY is connected to.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-12 21:58:17 -08:00
Ben Hutchings
f31a45d2f4 sfc: Remove MII extension cruft
Replace efx_nic::link_options bitfield with link_speed (speed in
Mbit/s) and link_fd (full duplex flag).

Remove broken auto-negotiation functions.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-12 21:57:57 -08:00
Ben Hutchings
ef08af03ef sfc: Remove workaround for old firmware bug
There was a bug in XAUI synchronisation in early 10Xpress firmware
versions.  This is fixed in released firmware and we do not need to
work around it.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-24 18:54:35 -04:00
Ben Hutchings
8c8661e4ce sfc: Extend self-tests
Include PMA/PMD in loopback self-tests as intended.

Add NVRAM checksum validation and include it in self-tests.

Add register self-tests.

Run PHY self-tests where available.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03 09:53:48 -04:00
Ben Hutchings
c1e5fcc980 sfc: Remove remnants of multi-port abstraction for MAC registers
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03 09:53:48 -04:00
Ben Hutchings
f8b87c1701 sfc: Make PHY flash mode a device attribute, not a module parameter
This allows updating PHY firmware for one interface without removing
all other interfaces handled by the driver.

Replace tx_disabled flags and 10Xpress status enumeration with flags in
enum efx_phy_mode.

Prevent an interface from being brought up while in PHY flash mode.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03 09:53:47 -04:00
Ben Hutchings
dc8cfa55da sfc: Use explicit bool for boolean variables, parameters and return values
Replace (cond ? 1 : 0) with cond or !!cond as appropriate, and
(cond ? 0 : 1) with !cond.

Remove some redundant boolean temporaries.

Rename one field that looks like a flag but isn't.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03 09:53:45 -04:00
Ben Hutchings
c264361d31 sfc: XMAC statistics fix-ups
Exclude assumed size of RX control frames from rx_bad_bytes.

Exclude assumed size of TX control frames from tx_good_bytes for
consistency with rx_good_bytes.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03 09:53:43 -04:00
Ben Hutchings
b055629eae [netdrvr] sfc: Report XAUI link down at default log level
This is normal when the external link is down so don't report it as an error.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-30 22:06:47 -04:00
Ben Hutchings
55668611d0 sfc: Replaced various macros with inline functions
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-22 05:59:27 -04:00
Ben Hutchings
91ad757c2f sfc: Removed casts to void
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-22 05:59:24 -04:00
Ben Hutchings
3273c2e8c6 [netdrvr] sfc: sfc: Add self-test support
Add a set of self-tests accessible thorugh ethtool.
Add hardware loopback and TX disable control code to support them.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-13 01:31:44 -04:00
Ben Hutchings
53269e94cd [netdrvr] sfc: Remove unused macro EFX_XAUI_RETRAIN_MAX
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-13 01:31:43 -04:00
Ben Hutchings
e52eddaece [netdrvr] sfc: Fix code formatting
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-13 01:31:42 -04:00
Ben Hutchings
75f2d3eac9 [netdrvr] sfc: Add phy_flash_cfg module parameter and implementation
The 10Xpress PHY supports flash upgrades through MDIO, but needs to be
put in upgrade mode at power-up.  This adds a module parameter and other
logic to support that.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-13 01:31:40 -04:00
Ben Hutchings
8ceee660aa New driver "sfc" for Solarstorm SFC4000 controller.
The driver supports the 10Xpress PHY and XFP modules on our reference
designs SFE4001 and SFE4002 and the SMC models SMC10GPCIe-XFP and
SMC10GPCIe-10BT.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-29 01:42:43 -04:00