Commit Graph

353 Commits

Author SHA1 Message Date
Matt Carlson
1b84d9462a tg3: Update version to 3.92.1
This patch increments the version to 3.92.1.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-09 15:41:33 -07:00
Matt Carlson
5f0c4a3cb6 tg3: Fix 5761 WOL
On 5761 non-e devices, two problems prevent the administrator from
overriding the WOL settings in the device's NVRAM.

The first problem is that GPIO 0 and GPIO 2 have been swapped.  This
change prevented the administrator from turning on WOL when it is
disabled in NVRAM.  The fix is to add a new path for the 5761 that
swaps the two GPIOs in the code as well.

The second problem is that GPIO 1 could not be toggled by the driver
because the GPIO is shared with the debug UART GPIO.  This will prevent
the administrator from being able to turn WOL off if it was enabled in
NVRAM.  The fix is to always disable the debug UART after a GRC reset.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-09 15:41:12 -07:00
Matt Carlson
0ba11fb307 tg3: Fix a flags typo
This patch fixes a problem where the TG3_FLAG_10_100_ONLY flag was
testing against the wrong flags variable.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-09 15:40:26 -07:00
Matt Carlson
2bd3ed0479 tg3: Fix 5714S / 5715S / 5780S link failures
The git commit ef167e2703 entitled
"Fix supporting flowctrl code" introduced a bug that prevents 5714S,
5715S and 5780S devices from falling back to a forced link mode.  The
problem is that the added flow control check will always fail if flow
control is set to autoneg and either RX or TX (or both) flow control
is enabled.  The driver defaults to setting flow control to autoneg
and advertises both RX and TX flow control.

The fix is to remove the errant check.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-09 15:39:55 -07:00
Matt Carlson
920e37f76b tg3: Update version to 3.92
This patch updates the version number to 3.92.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-02 16:49:50 -07:00
Matt Carlson
7c5026aa9b tg3: Add link state reporting to UMP firmware
All variants of the 5714, 5715, and 5780 offer a feature called the
"Universal Management Port".  This feature is implemented in firmware
and is largely transparent to the driver, except...

It turns out that the UMP firmware needs to know the current status
of the link.  Because the firmware cannot touch the PHY registers while
the driver is in control of the device, it needs the driver to report
link status changes through an additional handshaking mechanism.
Without this handshake, it has been observed in the field that the UMP
firmware will not operate correctly.

This patch implements the new handshake with the UMP firmware.  Since
the handshake uses the same mechanism ASF heartbeats use, code was
added to detect and wait for completion of a pending previous event.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-02 16:49:29 -07:00
Matt Carlson
109115e199 tg3: Fix ethtool loopback test for 5761 BX devices
A CPMU related loopback test bug existed for AX revisions of the 5761.
While that errata has been fixed, the CPMU still slows down the core
clock too far to run the loopback test successfully.  This patch
disables the CPMU LINK_SPEED mode just like we do with the AX
revisions of the 5761 and all revisions of the 5784.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-02 16:48:59 -07:00
Matt Carlson
fd1122a259 tg3: Fix 5761 NVRAM sizes
The 5761 NVRAM sizes assigned to the nvram_size member are half as big
as they should be.  This patch corrects the NVRAM sizes and replaces
the hardcoded constants with preprocessor constants for readability.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-02 16:48:36 -07:00
Matt Carlson
8ef2142886 tg3: Use constant 500KHz MI clock on adapters with a CPMU
The MI clock is not configured correctly on adapters with the CPMU
present.  The tg3 driver has code which statically sets the MI clock to
be a fraction of the speed at which the core clock is running.
However, the CPMU can change the adapter's core clock frequency based
on operating conditions.  Consequently, the MI will run slow when the
core's clock has been slowed down.

There is a new 500KHz constant frequency clock available on adapters
with a CPMU.  This patch removes the static core clock scaling and
configures the MI clock to use this new 500KHz clock instead.

Running the MI clock at slower speeds will not directly result in data
corruption, but it does challenge the PHY read and write routine timeouts.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-02 16:47:53 -07:00
Hirofumi Nakagawa
801678c5a3 Remove duplicated unlikely() in IS_ERR()
Some drivers have duplicated unlikely() macros.  IS_ERR() already has
unlikely() in itself.

This patch cleans up such pointless code.

Signed-off-by: Hirofumi Nakagawa <hnakagawa@miraclelinux.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Jeff Garzik <jeff@garzik.org>
Cc: Paul Clements <paul.clements@steeleye.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: Anton Altaparmakov <aia21@cantab.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Carsten Otte <cotte@de.ibm.com>
Cc: Patrick McHardy <kaber@trash.net>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:06:25 -07:00
Eric Dumazet
78c6146f16 tg3: sparse cleanup
Fix the following sparse warning :

drivers/net/tg3.c:4025:3: warning: context imbalance in 'tg3_restart_hw' 
- unexpected unlock

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-24 23:33:06 -07:00
Matt Carlson
41588ba1ae tg3: 5701 DMA corruption fix
Herbert Xu's commit fb93134dfc, entitled
"[TCP]: Fix size calculation in sk_stream_alloc_pskb", has triggered a
bug in the 5701 where the 5701 DMA engine will corrupt outgoing
packets.  This problem only happens when the starting address of the
packet matches a certain range of offsets and only when the 5701 is
placed downstream of a particular Intel bridge.

This patch detects the problematic bridge and if present, readjusts the
starting address of the packet data to a dword aligned boundary.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-19 18:12:33 -07:00
Sergei Shtylyov
2de58e30db tg3: fix MMIO for PPC 44x platforms
The driver stores the PCI resource addresses into 'unsigned long' variable
before calling ioremap_nocache() on them. This warrants kernel oops when the
registers are accessed on PPC 44x platforms which (being 32-bit) have PCI
memory space mapped beyond 4 GB.

The arch/ppc/ kernel has a fixup in ioremap() that creates an illusion that
the PCI memory resource is mapped below 4 GB, but arch/powerpc/ code got rid
of this trick, having instead CONFIG_RESOURCES_64BIT enabled.

[ Bump driver version and release date -DaveM ]

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-12 18:30:58 -07:00
Matt Carlson
b2a5c19ca0 [TG3]: Add PHY workaround for 5784
The 5784 B step and newer chips require the PHY DSPs to be fine-tuned
based on one-time programmable values stored in the chip.  This is
essential to achieve optimal PHY operations especially when using
long cables.  We also need to properly handle the 10Mbit RX bit in the
CPMU_CTRL register during PHY reset.

Update version to 3.89.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-03 21:44:44 -07:00
David S. Miller
7582a33557 [TG3]: Fix build warning on sparc32.
Sparc MAC address support should be protected consistently
with CONFIG_SPARC, but there was a stray CONFIG_SPARC64
case.

Bump driver version and release date.

Reported by Andrew Morton.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-20 15:53:15 -07:00
Stephen Hemminger
759afc3133 tg3: ethtool phys_id default
When asked to blink LEDs the tg3 driver behaves when using:
	ethtool -p ethX
The default value for data is zero, and other drivers interpret this
as blink forever (or at least a really long time).  The tg3 driver
interprets this as blink once.  All drivers should have the same
behaviour.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-23 19:51:59 -08:00
Al Viro
79ea13ce07 NULL noise in drivers/net
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:07:12 -08:00
Matt Carlson
255f97b311 [TG3]: Update version to 3.87
This patch updates the version number to 3.87.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:59:35 -08:00
Matt Carlson
ef167e2703 [TG3]: Fix supporting flowctrl code
This patch does three things.  It modifies tg3_setup_flow_control() to
use the administrator requested flow control settings if
autonegotiation is turned off.  It slightly modifies the
tg3_setup_fiber_mii_phy() function to account for this new use case.
And finally, it does the same for tg3_setup_copper_phy().

The copper modifications are more than a small multi-line change.  The
new code makes an attempt to avoid a link renegotiation if the link is
active at half duplex and the only difference between the current
advertised settings and requested advertised settings is the
flow control advertisements.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:59:34 -08:00
Matt Carlson
5be73b471b [TG3]: Correct sw autoneg flow control advertisements
This patch modifies the software autoneg code to use the administrator
specified flow control parameters.  Since the autonegotiation code uses
alternative flow control enumerations, the 1000-BaseX utility functions
are used and code was added to convert the definitions to and from the
alternate enumerations.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:59:34 -08:00
Matt Carlson
82cd3d11f3 [TG3]: Correct 5704S flowctrl advertisements
This patch modifies the 5704S hardware autoneg code to use the
administrator specified flow control parameters.  Since the 5704S uses
device specific flow control enumerations, the 1000-BaseX utility
functions are used and code was added to convert the definitions to and
from the proprietary enumerations.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:59:33 -08:00
Matt Carlson
c98f6e3be1 [TG3]: Replace some magic 5704S constants
This patch replaces magic values with preprocessor definitions for
the sg_dig_ctrl and sg_dig_status registers.  This is preparatory work
for the next patch.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:59:32 -08:00
Matt Carlson
ba4d07a848 [TG3]: Add 1000T & 1000X flowctl adv helpers
This patch adds two functions designed to convert abstract TX & RX
flow control parameters to 1000-BaseT and 1000-BaseX autonegotiation
advertisements.  Code that uses standard definitions which statically
advertises TX & RX flow control has been replaced with code that
configures the advertisements based on administrator dictated
preferences.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:59:31 -08:00
Matt Carlson
95937268b7 [TG3]: Add 1000T & 1000X flowctrl resolvers
This patch adds two new utility functions to resolve flow control.  One
function resolves flow control based on 1000-BaseT register definitions.
The other resolves flow control based on 1000-Base X register
definitions.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:59:30 -08:00
Matt Carlson
8d01862108 [TG3]: Separate requested and actual flow control parameters
This patch removes the TX and RX flow control flags from tg3_flags and
adds two new flow control variables, flowctrl and active_flowctrl.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:59:29 -08:00
Joe Perches
d664537228 [TG3]: Use print_mac
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:59:14 -08:00
Al Viro
286e310f94 [TG3]: Endianness bugfix.
tg3_nvram_write_block_unbuffered() is reading data from nvram into
allocated buffer before overwriting a part of it with user-supplied
data.  Then it feeds the entire page back to nvram.  It should be
storing the words it had read as little-endian, not as host-endian.
Note that tg3_set_eeprom() does exactly that for padding the same
data to full words before it gets passed down to tg3_nvram_write_block()
and then to tg3_nvram_write_block_unbuffered().

Moreover, when we get to sending the entire thing back to nvram, we
go through it word-by-word, doing essentially
	writel(swab32(le32_to_cpu(word)), ...)
so if we want them to reach the card in host-independent endianness,
we'd better really have all that buffer filled with fixed-endian.
For user-supplied part we obviously do have that (it's an array of
octets memcpy'd in), ditto for padding of user-supplied part to word
boundaries (taken care of in tg3_set_eeprom()).  The rest of the
buffer gets filled by tg3_nvram_write_block_unbuffered() and it would
damn better be consistent with that (and with tg3_get_eeprom(), while
we are at it - there we also convert the words read from nvram to
little-endian before returning the buffer to user).

The bug should get triggered on big-endian boxen when set_eeprom is done
for less than entire page.  Then the words that should've been unaffected
at all will actually get byteswapped in place in nvram.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-19 16:43:48 -08:00
Al Viro
b9fc7dc514 [TG3]: Endianness annotations.
Fixed misannotations, introduced a new helper - tg3_nvram_read_le().
It gets __le32 * instead of u32 * and puts there the value converted
to little-endian.  A lot of callers of tg3_nvram_read() were doing
that; converted them to tg3_nvram_read_le().

At that point the driver is practically endian-clean; the only remaining
place is an actual bug, AFAICS; will be dealt with in the next patch.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-19 16:43:47 -08:00
Matt Carlson
458c096ed7 [TG3]: Update version to 3.86
This patch updates the version number to 3.86

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-12 21:23:21 -08:00
Matt Carlson
3bebab5914 [TG3]: MII => TP
This patch changes the PHY type reported through ethtool for copper
devices from MII to TP.  The latter is more accurate.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-12 21:22:40 -08:00
Matt Carlson
b5af7126ea [TG3]: Add A1 revs
This patch adds the A1 revision of 5784, 5764, and 5761, and applies all
previous bugfixes.  In places where the list of devices gets too long,
the patch uses a new TG3_FLG3_5761_5784_AX_FIXES flag instead.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-12 21:22:02 -08:00
Matt Carlson
5f5c51e3d4 [TG3]: Increase the PCI MRRS
Previous devices hardcoded the PCI Maximum Read Request Size to 4K.  To
better comply with the PCI spec, the hardware now defaults the MRRS to
512 bytes.  This will yield poor driver performance if left untouched.
This patch increases the MRRS to 4K on driver initialization.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-12 21:19:37 -08:00
Matt Carlson
aa6c91fe59 [TG3]: Prescaler fix
Internal hardware timers become inaccurate after link events.  Clock
frequency switches performed by the CPMU fail to adjust timer
prescalers.  The fix is to detect core clock frequency changes during
link events and adjust the timer prescalers accordingly.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-12 21:18:04 -08:00
Matt Carlson
5f60891b80 [TG3]: Limit 5784 / 5764 to MAC LED mode
Most 5784 / 5764 LED modes do not work as expected because of a hardware
bug.  This patch forces the LED mode to be in MAC LED mode.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-12 21:17:07 -08:00
Matt Carlson
662f38d242 [TG3]: Disable GPHY autopowerdown
New CPMU devices contend with the GPHY for power management.  The GPHY
autopowerdown feature is enabled by default in the PHY and thus needs to
be disabled after every PHY reset.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-12 21:16:17 -08:00
Matt Carlson
e875093c96 [TG3]: CPMU adjustments for loopback tests
This patch adds the LINK_SPEED mode to the list of CPMU modes that can
cause the loopback tests to fail.  These bugs are planned to be fixed in
future revisions of the chip, so the patch qualifies the fixes as such.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-12 21:11:51 -08:00
Matt Carlson
a5767dec19 [TG3]: Fix nvram selftest failures
Newer devices contain bootcode in the chip's private ROM area.  This
bootcode is called selfboot.  Selfboot can be patched in the device's
NVRAM and the patches can have several formats.  In one particular
format, the checksum calculation needs to be slightly modified.  This
patch adjusts the NVRAM test code for that case, and add support for the
missing formats.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-12 21:10:58 -08:00
Matt Carlson
9acb961e7d [TG3]: 5784 / 5764 DMA engine lockup fix
5784 and 5764 devices lock up when the link speed is 10Mbps, the CPMU
link speed mode is enabled, and the MAC clock is running at 1.5Mhz.  The
fix is to run the MAC clock at faster speeds.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-12 21:10:06 -08:00
Matt Carlson
84af67fdf0 [TG3]: APE flag fix
This patch corrects a bug where the ENABLE_APE flag was tested against
the wrong flag variable.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-12 21:08:59 -08:00
Matt Carlson
ce057f0195 [TG3]: 5784 / 5764 GPHY power down fix
5784 and 5764 devices fail to link / pass traffic after one load /
unload cycle.  This happens because of a hardware bug in the new CPMU.
During normal operation, the MAC depends on the PHY clock being
available.  When the PHY is powered down, the clock the MAC depends on
is disabled.  The fix is to switch the MAC clock to an alternate source
before powering down the PHY, and to restore the MAC clock to the PHY
source upon device resume.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-12 21:08:03 -08:00
Matt Carlson
c88864df27 [TG3]: Fix 5761 PXEboot crash
When 5761 devices boot the machine using PXEboot, PXE leaves the device
active when it terminates.  The tg3 driver has code to detect this
condition and resets the device during initialization.  On 5761 devices,
device resets involve sending a driver state update message to the APE
on the 5761.  However, during this initialization stage, communications
to the APE registers have not yet been set up.  The driver then
dereferences a NULL pointer and crashes the machine.  The fix is to move
the APE register access setup earlier in the initialization code to
cover this condition.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-12 21:07:01 -08:00
David Miller
ba698ad4b7 PCI: Add quirk for devices which disable MSI when INTX_DISABLE is set.
A reasonably common problem with some devices is that they will
disable MSI generation when the INTX_DISABLE bit is set in the
PCI_COMMAND register.

Quirk this explicitly, guarding the pci_intx() calls in msi.c with
this quirk indication.

The first entries for this quirk are for 5714 and 5780 Tigon3 chips,
and thus we can remove the workaround code from the tg3.c driver.

Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Michael Chan <mchan@broadcom.com>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-05 13:35:16 -08:00
Matt Carlson
33b0c4fe6d [TG3]: Update version to 3.85
This patch updates the version number to 3.85.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-22 02:59:51 -07:00
Matt Carlson
8a6eac90e2 [TG3]: PCI command adjustment
This patch changes the way the driver works with the PCI command
register.  It adjusts the access size from dwords to words.  This patch
is done both as a PCI configuration space cleanup and as preparatory
work for PCI error recovery.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-22 02:59:51 -07:00
Matt Carlson
9c8a620e7f [TG3]: Add management FW version to ethtool report
This patch appends the management firmware version to the bootcode
firmware string reported through ethtool.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-22 02:59:50 -07:00
Matt Carlson
6c7af27c8a [TG3]: Add 5723 support
This patch adds support for upcoming 5723 devices.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-22 02:59:49 -07:00
Linus Torvalds
a52cefc80f Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (42 commits)
  [IPV6]: Consolidate the ip6_pol_route_(input|output) pair
  [TCP]: Make snd_cwnd_cnt 32-bit
  [TCP]: Update the /proc/net/tcp documentation
  [NETNS]: Don't panic on creating the namespace's loopback
  [NEIGH]: Ensure that pneigh_lookup is protected with RTNL
  [INET]: kmalloc+memset -> kzalloc in frag_alloc_queue
  [ISDN]: Fix compile with CONFIG_ISDN_X25 disabled.
  [IPV6]: Replace sk_buff ** with sk_buff * in input handlers
  [SELINUX]: Update for netfilter ->hook() arg changes.
  [INET]: Consolidate the xxx_put
  [INET]: Small cleanup for xxx_put after evictor consolidation
  [INET]: Consolidate the xxx_evictor
  [INET]: Consolidate the xxx_frag_destroy
  [INET]: Consolidate xxx_the secret_rebuild
  [INET]: Consolidate the xxx_frag_kill
  [INET]: Collect common frag sysctl variables together
  [INET]: Collect frag queues management objects together
  [INET]: Move common fields from frag_queues in one place.
  [TG3]: Fix performance regression on 5705.
  [ISDN]: Remove local copy of device name to make sure renames work.
  ...
2007-10-15 14:06:58 -07:00
Alejandro Martinez Ruiz
e9edda697e netdev: convert non-obvious instances to use ARRAY_SIZE()
This will convert remaining non-obvious or naive calculations of array
sizes to use ARRAY_SIZE() macro.

Signed-off-by: Alejandro Martinez Ruiz <alex@flawedcode.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-15 15:57:38 -04:00
Michael Chan
114342f2d3 [TG3]: Fix performance regression on 5705.
A performance regression was introduced by the following commit:

    commit ee6a99b539
    Author: Michael Chan <mchan@broadcom.com>
    Date:   Wed Jul 18 21:49:10 2007 -0700

    [TG3]: Fix msi issue with kexec/kdump.

In making that change, the PCI latency timer and cache line size
registers were not restored after chip reset.  On the 5705, the
latency timer gets reset to 0 during chip reset and this causes
very poor performance.

Update version to 3.84.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-15 12:26:38 -07:00
Michael Chan
4fd7ab5949 [TG3]: Refine napi poll loop.
Need to read and store sblk->status_tag before checking for more work.
The status tag is later written back to the hardware when enabling
interrupts to acknowledge how much work has been processed.  If the
order is reversed, we can end up acknowledging work we haven't
processed.

When we detect tx error, it is more correct to return the rx
work_done so far instead of 0.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-12 02:01:20 -07:00