General cleanup and use of standard functions to simplfy some spi reads
as well.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
General cleanup and use of standard functions to simplfy some spi reads
as well.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add ability to control delay for event free buffers
Add ability to control length of buffer
Add ability to control how many read cycles occur
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Tested-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
A very simple use of a kfifo as an alternative for the ring_sw
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Tested-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The current interface is not as adaptable as it should be. Moving
this complexity into the implementations makes it easier to add
new implementations.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Tested-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
As some of the platform not support irq_to_gpio, we pass gpio port
by platform data.
Signed-off-by: Tony SIM <chinyeow.sim.xt@renesas.com>
Signed-off-by: Andrew Chew <achew@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Replace a BSD-style license in Code Aurora Forum authored files with
an explicit GPLv2.
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The subject says it all. There is no need to
specify different page protection bits based
on the architecture.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The OSD layer was a wrapper around native interfaces
adding little value and was infact buggy -
refer to the osd_wait.patch for details.
This patch gets rid of the OSD abstraction.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
In preperation for getting rid of the osd layer; change
the code to use native wait interfaces. As part of this,
fixed the buggy implementation in the osd_wait_primitive
where the condition was cleared potentially after the
condition was signalled.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
In preperation for getting rid of the osd.[ch] files;
change all page allocation/free functions to use native interfaces.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The return status of wl_ucode_init_buf() is now being used. Also a bug in
firmware validation, which could lead to incompatible firmware not being
rejected by the driver, has been fixed. Comment from Dan Carpenter on using
negative error values has been incorporated in this commit.
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
If there is a problem with the firmware load (eg, firmware not present in
/lib/firmware/brcm), then the driver would dump its stack instead of bailing
out gracefully. Root cause was an uninitialized variable (wl->pub) being
dereferenced in the rfkill portion of a cleanup routine (wl_remove). Fix was
to move the rfkill calls into the correct spot in wl_remove().
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Upon firmware load failure, wl_release_fw() was called multiple
times. This caused the driver to oops. Solution was to remove redundant
wl_release_fw() calls.
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use native linux memcpy instead of legacy bcopy
Signed-off-by: Stanislav Fomichev <kernel@fomichev.me>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Code cleanup. Removed more defines, data structures and functions that were
unused because this driver supports mac core rev 22 and up. Got rid of redundant
brackets in wlc_bmac_txstatus() by moving locally defined variables above {}
scope.
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Code cleanup. Only mac core revisions 22 and higher are supported, therefore
comment related to older mac revisions was removed.
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Code cleanup. Removed code that was never invoked because the mac core
revision supported is always higher than 22.
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The constant array declaration aci_names is not referenced
anywhere in the code so it has been removed.
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Under error condition debug functions are being called which
only have implementation when BCMDBG is defined. This result
in #ifdef BCMDBG blocks in functions. This patch fixes this by
mapping the debug functions to empty macro when BCMDBG is not
defined. This makes the calling function easier to read.
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
During rfkill implementation the content of wlc_radio_upd function
was removed for testing purposes only. This ended up in the patch
sent out. This commit restores the function content, which was the
only function calling static function wlc_radio_enable. This removes
the compilation warning observed.
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
memset prototype specifies a void pointer as buffer. Conversion from
any pointer type to void pointer does not require an explicit cast.
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
When mac80211 informs about new BSSID this was configured toward
the hardware device, but the information is also needed inside
the driver itself. This patch takes care of that.
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Driver now follows beacon interval as set by mac80211 callback.
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The HT operation mode is provided by mac80211 and they are now
stored in the driver.
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The driver has flags for association state which are now being set
according to notification from mac80211.
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The implementation for bss_info_changed was not handling all
changes as provided by mac80211 module. These have been added
and will log message with changed parameters.
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The 802.11 core in the chipsets provides counters that are now
used to provide counter values to mac80211 through get_stats
callback. Counters related to ampdu and wmm (aka. wme) are not
yet incorporated.
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Allocation of buffer in function wl_ucode_init_buf can fail. This was
signalled by an error message, but code continued to access the null
pointer. This is now avoided by jumping to failure label.
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The driver contained several calls to printf which was mapped
to printk using a macro. These have been changed to explicit
call to printk or use an appropropriate macro.
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
When mac80211 attempts to configure the driver for 40MHz channel it
will return an error code -EIO as this is not yet supported.
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Non-error messages which were printed using WL_ERROR macro
were decreased to WL_NONE (which is a no_printk) or WL_TRACE
level macros. mac80211 callbacks that are not handled by the
driver are printed with WL_ERROR.
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Most mac80211 callbacks were named using prefix 'wl_ops' except
for a few. These have been aligned to use the prefix as well.
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
use %p instead of %X
drop casting of pointer to long long int
Cc: Mike Thomas <rmthomas@sciolus.org>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
remove pointless compilation flag
Cc: Mike Thomas <rmthomas@sciolus.org>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
EASYCAP_NEEDS_V4L2_DEVICE_H and EASYCAP_NEEDS_V4L2_FOPS are required in
in-tree driver
Cc: Mike Thomas <rmthomas@sciolus.org>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
remove uneedet brackets in ifs and switches
drop pointless castings
other small fixes
Cc: Mike Thomas <rmthomas@sciolus.org>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
masking return value of usb_control_msg() will mask negative
error values into positive.
Cc: Mike Thomas <rmthomas@sciolus.org>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Move the XGIfb_mmio_size global variable into the video_info struct.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
