Commit Graph

581 Commits

Author SHA1 Message Date
Paul Mundt
d02d6be5d5 sh: fix miscompilation of ip_fast_csum with gcc >= 4.3
As noted by Matthew Wilcox:

    Kyle McMartin just tracked down a bug on parisc to a missing
    "memory" clobber in the inline assembly implementation of
    ip_fast_csum.  The FRV, SH and Xtensa ports are also missing a
    memory clobber, so I thought it would be polite to let you know.

    The bug manifests as dropped network packets (obviously they have
    the wrong checksum).  It started appearing for parisc with GCC 4.3.

    The GCC manual says:

     If your assembler instructions access memory in an unpredictable
     fashion, add `memory' to the list of clobbered registers.  This
     will cause GCC to not keep memory values cached in registers
     across the assembler instruction and not optimize stores or loads
     to that memory.

    I see that FRV has a 400 byte memory output which may prevent this
    problem from appearing, but SH and Xtensa have nothing to prevent
    this bug.  Hope this saves you a few days of debugging.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-06-02 12:40:14 +09:00
Harvey Harrison
bfd3c7a728 sh: use the common ascii hex helpers
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-16 15:09:08 +09:00
Steve Glendinning
cdf7da899d sh: Fix DMAC base address for SH7709S
On SH7709S, DMAC can be found at 0xa4000020 (as with most of
the other sh3 cpu subtypes).

Split out definition of DMAC base address from definitions of
DMTE irqs.

Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-09 19:04:12 +09:00
Paul Mundt
1e0f50ae11 sh: Stub in cpu_to_node() and friends for NUMA build.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08 13:40:17 +09:00
Magnus Damm
d58876e289 sh: add interrupt ack code to sh3
This patch adds interrupt acknowledge code for external interrupt
sources on sh3 processors. Only really required for edge triggered
interrupts, but we ack regardless of sense configuration.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08 19:52:03 +09:00
Magnus Damm
a276e588a9 sh: unify external irq pin code for sh3
This patch unifies the sh3 external irq pin code. It buys us some
savings with reduced code redundancy, but the main feature with
this change is irq sense selection support for all sh3 processors.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08 19:52:00 +09:00
Magnus Damm
0146ba78b9 sh: add memory resources to /proc/iomem
Add physical memory resources such as System RAM, Kernel code/data/bss
and reserved crash dump area to /proc/iomem. Same strategy as on x86.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08 19:51:51 +09:00
Paul Mundt
ae8a5348ac sh: r7780rp: Kill off unneded ifdefs for irq setup.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08 19:51:44 +09:00
Adrian Bunk
f5f826c685 sh: remove the broken SH_MPC1211 support
SH_MPC1211 has been marked as BROKEN for some time.

Unless someone is working on reviving it now, I'd therefore suggest this
patch to remove it.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08 19:51:39 +09:00
Paul Mundt
ccd8058741 sh64: Fixup the nommu build.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08 19:51:37 +09:00
H. Peter Anvin
ba6677886e sh: types: use <asm-generic/int-*.h> for the sh architecture
This modifies <asm-sh/types.h> to use the <asm-generic/int-*.h>
generic include files.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Paul Mundt <lethal@linux-sh.org>
2008-05-02 16:18:40 -07:00
Jeff Dike
730f412c08 asm-*/futex.h should include linux/uaccess.h
Lots of asm-*/futex.h call pagefault_enable and pagefault_disable, which
are declared in linux/uaccess.h, without including linux/uaccess.h.

They all include asm/uaccess.h, so this patch replaces asm/uaccess.h
with linux/uaccess.h.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 08:29:52 -07:00
Harvey Harrison
6510d41954 kernel: Move arches to use common unaligned access
Unaligned access is ok for the following arches:
cris, m68k, mn10300, powerpc, s390, x86

Arches that use the memmove implementation for native endian, and
the byteshifting for the opposite endianness.
h8300, m32r, xtensa

Packed struct for native endian, byteshifting for other endian:
alpha, blackfin, ia64, parisc, sparc, sparc64, mips, sh

m86knommu is generic_be for Coldfire, otherwise unaligned access is ok.

frv, arm chooses endianness based on compiler settings, uses the byteshifting
versions.  Remove the unaligned trap handler from frv as it is now unused.

v850 is le, uses the byteshifting versions for both be and le.

Remove the now unused asm-generic implementation.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:06:27 -07:00
Gerald Schaefer
7f2e9525ba hugetlbfs: common code update for s390
Huge ptes have a special type on s390 and cannot be handled with the standard
pte functions in certain cases, e.g.  because of a different location of the
invalid bit.  This patch adds some new architecture- specific functions to
hugetlb common code, as a prerequisite for the s390 large page support.

This won't affect other architectures in functionality, but I need to add some
new dummy inline functions to the headers.

Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:25 -07:00
Gerald Schaefer
8fe627ec5b hugetlbfs: add missing TLB flush to hugetlb_cow()
A cow break on a hugetlbfs page with page_count > 1 will set a new pte with
set_huge_pte_at(), w/o any tlb flush operation.  The old pte will remain in
the tlb and subsequent write access to the page will result in a page fault
loop, for as long as it may take until the tlb is flushed from somewhere else.
 This patch introduces an architecture-specific huge_ptep_clear_flush()
function, which is called before the the set_huge_pte_at() in hugetlb_cow().

ATTENTION: This is just a nop on all architectures for now, the s390
implementation will come with our large page patch later.  Other architectures
should define their own huge_ptep_clear_flush() if needed.

Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:25 -07:00
Gerald Schaefer
6d779079bf hugetlbfs: architecture header cleanup
This patch moves all architecture functions for hugetlb to architecture header
files (include/asm-foo/hugetlb.h) and converts all macros to inline functions.
 It also removes (!) ARCH_HAS_HUGEPAGE_ONLY_RANGE,
ARCH_HAS_HUGETLB_FREE_PGD_RANGE, ARCH_HAS_PREPARE_HUGEPAGE_RANGE,
ARCH_HAS_SETCLEAR_HUGE_PTE and ARCH_HAS_HUGETLB_PREFAULT_HOOK.

Getting rid of the ARCH_HAS_xxx #ifdef and macro fugliness should increase
readability and maintainability, at the price of some code duplication.  An
asm-generic common part would have reduced the loc, but we would end up with
new ARCH_HAS_xxx defines eventually.

Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:25 -07:00
Nick Piggin
7e675137a8 mm: introduce pte_special pte bit
s390 for one, cannot implement VM_MIXEDMAP with pfn_valid, due to their memory
model (which is more dynamic than most).  Instead, they had proposed to
implement it with an additional path through vm_normal_page(), using a bit in
the pte to determine whether or not the page should be refcounted:

vm_normal_page()
{
	...
        if (unlikely(vma->vm_flags & (VM_PFNMAP|VM_MIXEDMAP))) {
                if (vma->vm_flags & VM_MIXEDMAP) {
#ifdef s390
			if (!mixedmap_refcount_pte(pte))
				return NULL;
#else
                        if (!pfn_valid(pfn))
                                return NULL;
#endif
                        goto out;
                }
	...
}

This is fine, however if we are allowed to use a bit in the pte to determine
refcountedness, we can use that to _completely_ replace all the vma based
schemes.  So instead of adding more cases to the already complex vma-based
scheme, we can have a clearly seperate and simple pte-based scheme (and get
slightly better code generation in the process):

vm_normal_page()
{
#ifdef s390
	if (!mixedmap_refcount_pte(pte))
		return NULL;
	return pte_page(pte);
#else
	...
#endif
}

And finally, we may rather make this concept usable by any architecture rather
than making it s390 only, so implement a new type of pte state for this.
Unfortunately the old vma based code must stay, because some architectures may
not be able to spare pte bits.  This makes vm_normal_page a little bit more
ugly than we would like, but the 2 cases are clearly seperate.

So introduce a pte_special pte state, and use it in mm/memory.c.  It is
currently a noop for all architectures, so this doesn't actually result in any
compiled code changes to mm/memory.o.

BTW:
I haven't put vm_normal_page() into arch code as-per an earlier suggestion.
The reason is that, regardless of where vm_normal_page is actually
implemented, the *abstraction* is still exactly the same. Also, while it
depends on whether the architecture has pte_special or not, that is the
only two possible cases, and it really isn't an arch specific function --
the role of the arch code should be to provide primitive functions and
accessors with which to build the core code; pte_special does that. We do
not want architectures to know or care about vm_normal_page itself, and
we definitely don't want them being able to invent something new there
out of sight of mm/ code. If we made vm_normal_page an arch function, then
we have to make vm_insert_mixed (next patch) an arch function too. So I
don't think moving it to arch code fundamentally improves any abstractions,
while it does practically make the code more difficult to follow, for both
mm and arch developers, and easier to misuse.

[akpm@linux-foundation.org: build fix]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: Carsten Otte <cotte@de.ibm.com>
Cc: Jared Hulbert <jaredeh@gmail.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:23 -07:00
Alexander van Heukelum
56a6b1eb7b generic: implement __fls on all 64-bit archs
Implement __fls on all 64-bit archs:

alpha has an implementation of fls64.
	Added __fls(x) = fls64(x) - 1.

ia64 has fls, but not __fls.
	Added __fls based on code of fls.

mips and powerpc have __ilog2, which is the same as __fls.
	Added __fls = __ilog2.

parisc, s390, sh and sparc64:
	Include generic __fls.

x86_64 already has __fls.

Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-26 19:21:16 +02:00
Manuel Lauss
a26c20b1fa i2c: Renesas SH7760 I2C master driver
Driver for I2C interfaces in master mode on SH7760.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-04-22 22:16:47 +02:00
Linus Torvalds
bda0c0afa7 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6: (42 commits)
  PCI: Change PCI subsystem MAINTAINER
  PCI: pci-iommu-iotlb-flushing-speedup
  PCI: pci_setup_bridge() mustn't be __devinit
  PCI: pci_bus_size_cardbus() mustn't be __devinit
  PCI: pci_scan_device() mustn't be __devinit
  PCI: pci_alloc_child_bus() mustn't be __devinit
  PCI: replace remaining __FUNCTION__ occurrences
  PCI: Hotplug: fakephp: Return success, not ENODEV, when bus rescan is triggered
  PCI: Hotplug: Fix leaks in IBM Hot Plug Controller Driver - ibmphp_init_devno()
  PCI: clean up resource alignment management
  PCI: aerdrv_acpi.c: remove unneeded NULL check
  PCI: Update VIA CX700 quirk
  PCI: Expose PCI VPD through sysfs
  PCI: iommu: iotlb flushing
  PCI: simplify quirk debug output
  PCI: iova RB tree setup tweak
  PCI: parisc: use generic pci_enable_resources()
  PCI: ppc: use generic pci_enable_resources()
  PCI: powerpc: use generic pci_enable_resources()
  PCI: ia64: use generic pci_enable_resources()
  ...
2008-04-21 15:58:35 -07:00
Linus Torvalds
ec965350bb Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched-devel
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched-devel: (62 commits)
  sched: build fix
  sched: better rt-group documentation
  sched: features fix
  sched: /debug/sched_features
  sched: add SCHED_FEAT_DEADLINE
  sched: debug: show a weight tree
  sched: fair: weight calculations
  sched: fair-group: de-couple load-balancing from the rb-trees
  sched: fair-group scheduling vs latency
  sched: rt-group: optimize dequeue_rt_stack
  sched: debug: add some debug code to handle the full hierarchy
  sched: fair-group: SMP-nice for group scheduling
  sched, cpuset: customize sched domains, core
  sched, cpuset: customize sched domains, docs
  sched: prepatory code movement
  sched: rt: multi level group constraints
  sched: task_group hierarchy
  sched: fix the task_group hierarchy for UID grouping
  sched: allow the group scheduler to have multiple levels
  sched: mix tasks and groups
  ...
2008-04-21 15:40:24 -07:00
Greg Kroah-Hartman
1ba6ab11d8 PCI: remove initial bios sort of PCI devices on x86
We currently keep 2 lists of PCI devices in the system, one in the
driver core, and one all on its own.  This second list is sorted at boot
time, in "BIOS" order, to try to remain compatible with older kernels
(2.2 and earlier days).  There was also a "nosort" option to turn this
sorting off, to remain compatible with even older kernel versions, but
that just ends up being what we have been doing from 2.5 days...

Unfortunately, the second list of devices is not really ever used to 
determine the probing order of PCI devices or drivers[1].  That is done
using the driver core list instead.  This change happened back in the
early 2.5 days.

Relying on BIOS ording for the binding of drivers to specific device
names is problematic for many reasons, and userspace tools like udev
exist to properly name devices in a persistant manner if that is needed,
no reliance on the BIOS is needed.

Matt Domsch and others at Dell noticed this back in 2006, and added a
boot option to sort the PCI device lists (both of them) in a
breadth-first manner to help remain compatible with the 2.4 order, if
needed for any reason.  This option is not going away, as some systems
rely on them.

This patch removes the sorting of the internal PCI device list in "BIOS"
mode, as it's not needed at all anymore, and hasn't for many years.
I've also removed the PCI flags for this from some other arches that for
some reason defined them, but never used them.

This should not change the ordering of any drivers or device probing.

[1] The old-style pci_get_device and pci_find_device() still used this
sorting order, but there are very few drivers that use these functions,
as they are deprecated for use in this manner.  If for some reason, a
driver rely on the order and uses these functions, the breadth-first
boot option will resolve any problem.

Cc: Matt Domsch <Matt_Domsch@dell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-20 21:46:58 -07:00
Hidetoshi Seto
1d3504fcf5 sched, cpuset: customize sched domains, core
[rebased for sched-devel/latest]

 - Add a new cpuset file, having levels:
     sched_relax_domain_level

 - Modify partition_sched_domains() and build_sched_domains()
   to take attributes parameter passed from cpuset.

 - Fill newidle_idx for node domains which currently unused but
   might be required if sched_relax_domain_level become higher.

 - We can change the default level by boot option 'relax_domain_level='.

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-19 19:45:00 +02:00
Paul Mundt
178dd0cd28 sh: Add support for SH7723 CPU subtype.
This adds basic support for the SH7723 MobileR2 CPU.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-04-18 09:50:07 -07:00
Magnus Damm
9db913c3a6 sh: Add MigoR header file
This patch adds a MigoR specific header file. We may want to use a cpu
specific header file instead, but this will do for now.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-04-18 09:50:03 -07:00
Paul Mundt
9460c0ce9b sh: Fix up __access_ok() check for nommu.
Presently this only checks to see if an address is an RAM, but this
doesn't work with XIP, so just always return 1. Follows m68knommu.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-04-18 09:50:02 -07:00
Yoshihiro Shimoda
6e862995a0 sh: Add support for Solution Engine SH7721 board
Add support for Solution Engine SH7721 board(MS7721RP01).

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-04-18 09:50:02 -07:00
Masayuki Hosokawa
d391c6217d sh: Hook up remaining IRQ sources for R7780MP FPGA.
Signed-off-by: Masayuki Hosokawa <hosokawa@ace-jp.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-04-18 09:50:01 -07:00
Paul Mundt
2ad699080b sh: Initial support for the MX-G CPU.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-04-18 09:50:01 -07:00
Paul Mundt
b9e393c2ba sh: Create an sh debugfs root.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-04-18 09:50:01 -07:00
Magnus Damm
90fce7f4fb sh: SuperH KEYSC keypad data for Solution Engine 7722
Add KEYSC platform data for the Solution Engine 7722 board.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Cc: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-04-18 09:50:01 -07:00
Magnus Damm
795e6bf335 sh: SuperH KEYSC platform driver
Add a platform driver for the SuperH KEYSC block.  The driver expects to get
mode, timing information and keypad layout from the board code as platform
data.  The board code is resonsible for pin configuration.

Both sh7343 and sh7722 should be supported, but only the sh7722 processor has
been tested so far.  SH_KEYSC_MODE_3 is yet to be tested.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Cc: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-04-18 09:50:00 -07:00
Linus Torvalds
188da98800 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (58 commits)
  ide: remove ide_init_default_irq() macro
  ide: move default IDE ports setup to ide_generic host driver
  ide: remove obsoleted "idex=noprobe" kernel parameter (take 2)
  ide: remove needless hwif->irq check from ide_hwif_configure()
  ide: init hwif->{io_ports,irq} explicitly in legacy VLB host drivers
  ide: limit legacy VLB host drivers to alpha, x86 and mips
  cmd640: init hwif->{io_ports,irq} explicitly
  cmd640: cleanup setup_device_ptrs()
  ide: add ide-4drives host driver (take 3)
  ide: remove ppc ifdef from init_ide_data()
  ide: remove ide_default_io_ctl() macro
  ide: remove CONFIG_IDE_ARCH_OBSOLETE_INIT
  ide: add CONFIG_IDE_ARCH_OBSOLETE_DEFAULTS (take 2)
  ppc/pmac: remove no longer needed IDE quirk
  ppc: don't include <linux/ide.h>
  ppc: remove ppc_ide_md
  ppc/pplus: remove ppc_ide_md.ide_init_hwif hook
  ppc/sandpoint: remove ppc_ide_md hooks
  ppc/lopec: remove ppc_ide_md hooks
  ppc/mpc8xx: remove ppc_ide_md hooks
  ...
2008-04-18 08:39:24 -07:00
Bartlomiej Zolnierkiewicz
9dfcd15a6d ide: remove ide_default_io_ctl() macro
It is always == '((base) + 0x206)' if CONFIG_IDE_ARCH_OBSOLETE_DEFAULTS=y
and it is not needed otherwise (arm, blackfin, parisc, ppc64, sh, sparc[64]).

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18 00:46:34 +02:00
Matthew Wilcox
64ac24e738 Generic semaphore implementation
Semaphores are no longer performance-critical, so a generic C
implementation is better for maintainability, debuggability and
extensibility.  Thanks to Peter Zijlstra for fixing the lockdep
warning.  Thanks to Harvey Harrison for pointing out that the
unlikely() was unnecessary.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
2008-04-17 10:42:34 -04:00
Christian Borntraeger
dd135ebbd2 kvm: provide kvm.h for all architecture: fixes headers_install
Currently include/linux/kvm.h is not considered by make headers_install,
because Kbuild cannot handle " unifdef-$(CONFIG_FOO) += foo.h.  This problem
was introduced by

commit fb56dbb31c
Author: Avi Kivity <avi@qumranet.com>
Date:   Sun Dec 2 10:50:06 2007 +0200

    KVM: Export include/linux/kvm.h only if $ARCH actually supports KVM

    Currently, make headers_check barfs due to <asm/kvm.h>, which <linux/kvm.h>
    includes, not existing.  Rather than add a zillion <asm/kvm.h>s, export kvm.
    only if the arch actually supports it.

    Signed-off-by: Avi Kivity <avi@qumranet.com>

which makes this an 2.6.25 regression.

One way of solving the issue is to enhance Kbuild, but Avi and David conviced
me, that changing headers_install is not the way to go.  This patch changes
the definition for linux/kvm.h to unifdef-y.

If  unifdef-y is used for linux/kvm.h "make headers_check" will fail on all
architectures without asm/kvm.h.  Therefore, this patch also provides
asm/kvm.h on all architectures.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Avi Kivity <avi@qumranet.com>
Cc: Sam Ravnborg <sam@ravnborg.org
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-02 15:28:18 -07:00
Adrian Bunk
7d7f7c3ed2 remove include/asm-sh/floppy.h
This patch removes the unused include/asm-sh/floppy.h
(ARCH_MAY_HAVE_PC_FDC was not enabled).

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-03-31 16:16:02 +09:00
Paul Mundt
138bed154e sh: Fix TIF_USEDFPU clearing under FPU emulation.
The unlazy_fpu() path calls in to save_fpu() if the task has
TIF_USEDFPU set. save_fpu() being the crap API that it is has the side
effect of clearing the flag itself, which presently doesn't happen
if we're using FPU emulation. Fix this up for now, pending an overhaul
in 2.6.26.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-03-26 19:09:21 +09:00
Paul Mundt
9bbafce2ee sh: Fix occasional FPU register corruption under preempt.
Presently with preempt enabled there's the possibility to be preempted
after the TIF_USEDFPU test and the register save, leading to bogus
state post-__switch_to(). Use an explicit preempt_disable()/enable()
pair around unlazy_fpu()/clear_fpu() to avoid this. Follows the x86
change.

Reported-by: Takuo Koguchi <takuo.koguchi.sw@hitachi.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-03-26 19:02:47 +09:00
Paul Mundt
6dba1b6760 sh: Fix more user header breakage from sh64 integration.
posix_types.h and byteorder.h were sticking purely with the Kconfig
symbols, which doesn't work when we scrub the headers for user use.

Fixes a very unhelpful build error in current klibc.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-03-14 17:21:09 +09:00
Paul Mundt
7b9726a7a0 sh: Fix up the sh64 build.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-03-06 17:23:15 +09:00
Paul Mundt
96de1a8f02 serial: Move asm-sh/sci.h to linux/serial_sci.h.
This header is needed on other architectures as well (namely h8300),
which currently fails to build without this in place. Rather than
duplicating the port definition completely there, just move this to a
common location instead.

This should get h8300 working again for 2.6.25, in addition to the
changes already pushed by Sato-san in -rc2.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-26 14:52:45 +09:00
Hideo Saito
8b1d16540c sh: Fix up HAS_SR_RB typo in entry-macros.
Signed-off-by: Hideo Saito <saito@densan.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-26 14:28:48 +09:00
Paul Mundt
cc645a0205 sh: Rename SH-3 CCR3 reg to avoid synclink_cs clash.
drivers/char/pcmcia/synclink_cs.c:284:1: warning: "CCR3" redefined
In file included from include/asm/cache.h:13,
                 from include/asm/processor_32.h:15,
                 from include/asm/processor.h:60,
                 from include/linux/prefetch.h:14,
                 from include/linux/list.h:8,
                 from include/linux/module.h:9,
                 from drivers/char/pcmcia/synclink_cs.c:38:
include/asm/cpu/cache.h:38:1: warning: this is the location of the previous definition

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-25 18:49:44 +09:00
Magnus Damm
c0ca41a27e sh: fix ioreadN_rep and iowriteN_rep
This patch is a fix to make sure readsN/writesN are used over insN/outsN for
ioreadN_rep/iowriteN_rep.

The current state of the sh io code is that mmio operations like readN/writeN
and ioreadN/iowriteN are unaffected by the value of generic_io_base. This is
different fom port based io like inN/outN which gets adjusted using the value
in generic_io_base.

Without this patch ioreadN_rep/iowriteN_rep get their addresses adjusted.
The address for mmio access is adjusted using generic_io_base. This is wrong.
The ata core code currently crashes if generic_io_base is set.

This patch changes ioreadN_rep/iowriteN_rep to follow the same rules as the
rest of the mmio operations, ie don't adjust using generic_io_base.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Acked-by: Katsuya MATSUBARA <matsu@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-14 14:25:37 +09:00
Paul Mundt
f99cb7a43c sh: Kill off more dead symbols.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-14 14:22:12 +09:00
Paul Mundt
c7a49dd42d sh: asm/irq.h needs asm/cpu/irq.h.
The SH-5 build currently fails when trying to build the i8042 code due
to the missing IRQ definitions. These are provided in asm/cpu/irq.h, so
just include that there to get it building again.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-14 14:22:12 +09:00
Paul Mundt
38350e0a00 sh: Get SH-5 caches working again post-unification.
A number of cleanups to get the SH-5 cache management code in line with
the rest of the SH backend.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-14 14:22:12 +09:00
Paul Mundt
bb7de070d2 sh: asm/tlb.h needs linux/pagemap.h for CONFIG_SWAP=n.
linux/swap.h really wants to include linux/pagemap.h in order to satisfy
the page_cache_release()/release_pages() definition requirements when
CONFIG_SWAP=n. Unfortunately the code in question contains:

	/* only sparc can not include linux/pagemap.h in this file
	 * so leave page_cache_release and release_pages undeclared... */
	#define free_page_and_swap_cache(page) \
		page_cache_release(page)
	#define free_pages_and_swap_cache(pages, nr) \
		release_pages((pages), (nr), 0);

so it looks like we're stuck with doing it in asm/tlb.h instead, as
others already do (ARM, CRIS, etc.). Grumble.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-14 14:22:11 +09:00
Kristoffer Ericson
c2f4d36640 sh: Tidy include/asm-sh/hp6xx.h
This patch removes defunct. led support functions from hp6xx.h since they are now
added in a proper driver (see commit below). Also adds tabs instead of spaces before comments.

*commit d39a7a63eb

Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-14 14:22:11 +09:00