Commit Graph

18 Commits

Author SHA1 Message Date
Ishizaki Kou
5b7c726ff0 [POWERPC] Add a field for each specific bus to struct pci_controller
Struct pci_controller doesn't prepare for the dependent data of each
specific bus. This patch adds private member to struct pci_controller.

Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-01-24 21:13:59 +11:00
Benjamin Herrenschmidt
396a1a5832 [POWERPC] Fix mmap of PCI resource with hack for X
The powerpc version of pci_resource_to_user() and associated hooks
used by /proc/bus/pci and /sys/bus/pci mmap have been broken for some
time on machines that don't have a 1:1 mapping of devices (basically
on non-PowerMacs) and have PCI devices above 32 bits.

This attempts to fix it as well as possible.

The rule is supposed to be that pci_resource_to_user() always converts
the resources back into a BAR values since that's what the /proc
interface was supposed to deal with. However, for X to work on
platforms where PCI MMIO is not mapped 1:1, it became a habit of
platforms like powerpc to pass "fixed up" values there since X expects
to be able to use values from /proc/bus/pci/devices as offsets to mmap
of /dev/mem...

So we keep that contraption here, causing also /sys/*/resource to
expose fully absolute MMIO addresses instead of BAR values, which is
ugly, but should still work as long as those are only used to calculate
alignment within a page.

X is still broken when built 32 bits on machines where PCI MMIO can be
above 32-bit space unfortunately.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-08 17:21:06 +11:00
Benjamin Herrenschmidt
803d4573e6 [POWERPC] Add "parent" struct device for PCI host bridges
Add a "parent" struct device to our PCI host bridge data structure so that
PCI can be rooted off another device in sysfs.

Note that arch/ppc doesn't use it, only arch/powerpc, though it's available
for both 32 and 64 bits.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04 20:38:47 +11:00
Dave Jones
038b0a6d8d Remove all inclusions of <linux/config.h>
kbuild explicitly includes this at build time.

Signed-off-by: Dave Jones <davej@redhat.com>
2006-10-04 03:38:54 -04:00
Anton Blanchard
357518fa34 [POWERPC] pcibus_to_node fixes
of_node_to_nid returns -1 if the associativity cannot be found. This
means pcibus_to_cpumask has to be careful not to pass a negative index into
node_to_cpumask.

Since pcibus_to_node could be used a lot, and of_node_to_nid is slow (it
walks a list doing strcmps), lets also cache the node in the
pci_controller struct.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-15 19:31:26 +10:00
Stephen Rothwell
403fac4f83 [PATCH] powerpc: remove LogicalSlot from pci_dn
As we now store enough information in the device_node.

Also the Flags field was not used either, do remove that.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-05-24 16:08:56 +10:00
Stephen Rothwell
b025279316 [PATCH] powerpc: remove Irq from pci_dn
As we now store enough information in the device_node to allocate the
irq number in pcibios_final_fixup.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-05-24 16:08:56 +10:00
Stephen Rothwell
96ff6afaf1 [PATCH] powerpc: remove iSeries_Global_Device_List
We can now scan the list of device nodes instead.  This also allows us
to remove the Device_list member of struct pci_dn.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-05-24 16:08:56 +10:00
Stephen Rothwell
9623b5d3d3 [PATCH] powerpc: small pci cleanups
pcibios_claim_one_bus is not needed on iSeries and phbs_remap_io can be
mode static.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-12 20:09:30 +11:00
Linas Vepstas
7684b40cb5 [PATCH] powerpc: Save device BARs much earlier in the boot sequence
241-eeh-save-bars-earlier.patch

Save the PCI device bars *before* any PCI probing is done.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
(cherry picked from 76c902b919098860f3d4e125f847abcc4cb1782a commit)
2006-01-10 15:30:39 +11:00
Linas Vepstas
25e591f6dd [PATCH] powerpc: Add "partitionable endpoint" support
26-eeh-partition-endpoint.patch

New versions of firmware introduce a new method by which the
"partitionable endpoint" (the point at which the pci bus is cut)
should be located.  This code adds the support for this (mandatory)
new feature.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
(cherry picked from 9fcfb5d35b5294659f9299aa9cae6fd16325c07e commit)
2006-01-10 15:29:14 +11:00
Arnd Bergmann
88ced03149 [PATCH] powerpc: sanitize header files for user space includes
include/asm-ppc/ had #ifdef __KERNEL__ in all header files that
are not meant for use by user space, include/asm-powerpc does
not have this yet.

This patch gets us a lot closer there. There are a few cases
where I was not sure, so I left them out. I have verified
that no CONFIG_* symbols are used outside of __KERNEL__
any more and that there are no obvious compile errors when
including any of the headers in user space libraries.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 15:13:08 +11:00
Benjamin Herrenschmidt
f2c4583a38 [PATCH] powerpc: pci_address_to_pio fix
This fixes pci_address_to_pio() to return an unsigned long (to be safe)
and fixes a bug in the implementation that caused it to return a bogus
IO port number

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 15:05:56 +11:00
linas
31087d7d49 [PATCH] powerpc: export PCI fixup routine
There is code in the RPAPHP directory that is identical to this routine;
I'll be removing that code in an upcoming patch, but this patch is needed
to expose the function to make it callable.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 14:54:02 +11:00
Benjamin Herrenschmidt
d2dd482bc1 [PATCH] powerpc: Update OF address parsers
This updates the OF address parsers to return the IO flags
indicating the type of address obtained. It also adds a PCI
call for converting physical addresses that hit IO space into
into IO tokens, and add routines that return the translated
addresses into struct resource

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 14:51:26 +11:00
Linas Vepstas
2bf6a8fa21 [PATCH] powerpc: migrate common PCI hotplug code
23-rpaphp-migrate.patch (parts)

This patch moves some pci device add & remove code from the PCI
hotplug directory to the arch/powerpc/kernel directory, and cleans
it up a tad. The primary reason for this is that the code performs
some fairly generic operations that are shared with the PCI error
recovery code (living in the arch/powerpc/kernel directory).

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 14:51:12 +11:00
Benjamin Herrenschmidt
463ce0e103 [PATCH] powerpc: serial port discovery (#2)
This moves the discovery of legacy serial ports to a separate file,
makes it common to ppc32 and ppc64, and reworks it to use the new OF
address translators to get to the ports early. This new version can also
detect some PCI serial cards using legacy chips and will probably match
those discovered port with the default console choice.

Only ppc64 gets udbg still yet, unifying udbg isn't finished yet.

It also adds some speed-probing code to udbg so that the default console
can come up at the same speed it was set to by the firmware.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 14:49:50 +11:00
Paul Mackerras
047ea78465 powerpc: Trivially merge several headers from asm-ppc64 to asm-powerpc
For these, I have just done the lame-o merge where the file ends up
looking like:

	#ifndef CONFIG_PPC64
	#include <asm-ppc/foo.h>
	#else
	... contents from asm-ppc64/foo.h
	#endif

so nothing has changed, really, except that we reduce include/asm-ppc64
a bit more.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-19 20:17:32 +11:00