Commit Graph

1091 Commits

Author SHA1 Message Date
NeilBrown
de01dfadf2 md: Ensure an md array never has too many devices.
Each different metadata format supported by md supports a
different maximum number of devices.
We really should be enforcing this maximum in the kernel, but
we aren't quite doing that properly.

We currently only enforce it at the 'hot_add' point, which is an
older interface which is not used by current userspace.

We need to also enforce it at 'add_new_disk' time for active arrays
and at 'do_md_run' time when starting a new array.

So move the test from 'hot_add' into 'bind_rdev_to_array' which is
called from both 'hot_add' and 'add_new_disk, and add a new
test in 'analyse_sbs' which is called from 'do_md_run'.

This bug (or missing feature) has been around "forever" and so
the patch is suitable for any -stable that is currently maintained.

Cc: stable@kernel.org

Signed-off-by: NeilBrown <neilb@suse.de>
2009-02-06 18:02:46 +11:00
Andre Noll
852c8bf484 md: Fix a bug in linear.c causing which_dev() to return the wrong device.
ab5bd5cbc8 introduced the following
bug in linear software raid for large arrays on 32 bit machines:

which_dev() computes the device holding a given sector by shifting
down the sector number to a 32 bit range, dividing by the array
spacing and looking up the resulting index in the hash table of
the array.

Because the computed index might be slightly too small, a loop at
the end of which_dev() increases the index until the given sector
actually falls into the range of the device associated with that index.

The changes of the above mentioned commit caused this loop to check
whether the _index_ rather than the sector number is small enough,
effectively bypassing the loop and thus possibly returning the wrong
device.

As reported by Simon Kirby, this leads to errors such as

	linear_make_request: Sector 2340486136 out of bounds on dev sdi: 156301312 sectors, offset 2109870464

Fix this bug by introducing a local variable for the index so that
the variable containing the passed sector is left unchanged.

Cc: stable@kernel.org
Signed-off-by: Andre Noll <maan@systemlinux.org>
Signed-off-by: NeilBrown <neilb@suse.de>
2009-02-06 15:10:52 +11:00
NeilBrown
4706b349f4 md: Allow read error in a single drive raid1 to be passed up.
If a raid1 only has a single working device and gets a read error, 
we choose to simply return that error up to the filesystem (or whatever)
rather than failing the whole array.

However the codes doesn't quite do that.  We attempt a readbalance
which allocates the same drive, so we retry the read - indefinitely. 

Instead:  If read_balance in the error case chooses the same drive that just
failed, treat it as a failure and don't retry.

Signed-off-by: NeilBrown <neilb@suse.de>
2009-02-06 15:06:47 +11:00
NeilBrown
4044ba58dd md: don't retry recovery of raid1 that fails due to error on source drive.
If a raid1 has only one working drive and it has a sector which
gives an error on read, then an attempt to recover onto a spare will
fail, but as the single remaining drive is not removed from the
array, the recovery will be immediately re-attempted, resulting
in an infinite recovery loop.

So detect this situation and don't retry recovery once an error
on the lone remaining drive is detected.

Allow recovery to be retried once every time a spare is added
in case the problem wasn't actually a media error.

Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09 08:31:11 +11:00
NeilBrown
efeb53c0e5 md: Allow md devices to be created by name.
Using sequential numbers to identify md devices is somewhat artificial.
Using names can be a lot more user-friendly.

Also, creating md devices by opening the device special file is a bit
awkward.

So this patch provides a new option for creating and naming devices.

Writing a name such as "md_home" to
    /sys/modules/md_mod/parameters/new_array
will cause an array with that name to be created.  It will appear in
/sys/block/ /proc/partitions and /proc/mdstat as 'md_home'.
It will have an arbitrary minor number allocated.

md devices that a created by an open are destroyed on the last
close when the device is inactive.
For named md devices, they will not be destroyed until the array
is explicitly stopped, either with the STOP_ARRAY ioctl or by
writing 'clear' to /sys/block/md_XXXX/md/array_state.

The name of the array must start 'md_' to avoid conflict with
other devices.

Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09 08:31:10 +11:00
NeilBrown
d3374825ce md: make devices disappear when they are no longer needed.
Currently md devices, once created, never disappear until the module
is unloaded.  This is essentially because the gendisk holds a
reference to the mddev, and the mddev holds a reference to the
gendisk, this a circular reference.

If we drop the reference from mddev to gendisk, then we need to ensure
that the mddev is destroyed when the gendisk is destroyed.  However it
is not possible to hook into the gendisk destruction process to enable
this.

So we drop the reference from the gendisk to the mddev and destroy the
gendisk when the mddev gets destroyed.  However this has a
complication.
Between the call
   __blkdev_get->get_gendisk->kobj_lookup->md_probe
and the call
   __blkdev_get->md_open

there is no obvious way to hold a reference on the mddev any more, so
unless something is done, it will disappear and gendisk will be
destroyed prematurely.

Also, once we decide to destroy the mddev, there will be an unlockable
moment before the gendisk is unlinked (blk_unregister_region) during
which a new reference to the gendisk can be created.  We need to
ensure that this reference can not be used.  i.e. the ->open must
fail.

So:
 1/  in md_probe we set a flag in the mddev (hold_active) which
     indicates that the array should be treated as active, even
     though there are no references, and no appearance of activity.
     This is cleared by md_release when the device is closed if it
     is no longer needed.
     This ensures that the gendisk will survive between md_probe and
     md_open.

 2/  In md_open we check if the mddev we expect to open matches
     the gendisk that we did open.
     If there is a mismatch we return -ERESTARTSYS and modify
     __blkdev_get to retry from the top in that case.
     In the -ERESTARTSYS sys case we make sure to wait until
     the old gendisk (that we succeeded in opening) is really gone so
     we loop at most once.

Some udev configurations will always open an md device when it first
appears.   If we allow an md device that was just created by an open
to disappear on an immediate close, then this can race with such udev
configurations and result in an infinite loop the device being opened
and closed, then re-open due to the 'ADD' even from the first open,
and then close and so on.
So we make sure an md device, once created by an open, remains active
at least until some md 'ioctl' has been made on it.  This means that
all normal usage of md devices will allow them to disappear promptly
when not needed, but the worst that an incorrect usage will do it
cause an inactive md device to be left in existence (it can easily be
removed).

As an array can be stopped by writing to a sysfs attribute
  echo clear > /sys/block/mdXXX/md/array_state
we need to use scheduled work for deleting the gendisk and other
kobjects.  This allows us to wait for any pending gendisk deletion to
complete by simply calling flush_scheduled_work().



Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09 08:31:10 +11:00
NeilBrown
a21d15042d md: centralise all freeing of an 'mddev' in 'md_free'
md_free is the .release handler for the md kobj_type.
So it makes sense to release all the objects referenced by
the mddev in there, rather than just prior to calling kobject_put
for what we think is the last time.

Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09 08:31:09 +11:00
NeilBrown
8b76539823 md: move allocation of ->queue from mddev_find to md_probe
It is more balanced to just do simple initialisation in mddev_find,
which allocates and links a new md device, and leave all the
more sophisticated allocation to md_probe (which calls mddev_find).
md_probe already allocated the gendisk.  It should allocate the
queue too.

Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09 08:31:08 +11:00
Cheng Renquan
cd2ac9321c md: need another print_sb for mdp_superblock_1
md_print_devices is called in two code path: MD_BUG(...), and md_ioctl
with PRINT_RAID_DEBUG.  it will dump out all in use md devices
information;

However, it wrongly processed two types of superblock in one:

The header file <linux/raid/md_p.h> has defined two types of superblock,
struct mdp_superblock_s (typedefed with mdp_super_t) according to md with
metadata 0.90, and struct mdp_superblock_1 according to md with metadata
1.0 and later,

These two types of superblock are very different,

The md_print_devices code processed them both in mdp_super_t, that would
lead to wrong informaton dump like:

	[ 6742.345877]
	[ 6742.345887] md:	**********************************
	[ 6742.345890] md:	* <COMPLETE RAID STATE PRINTOUT> *
	[ 6742.345892] md:	**********************************
	[ 6742.345896] md1: <ram7><ram6><ram5><ram4>
	[ 6742.345907] md: rdev ram7, SZ:00065472 F:0 S:1 DN:3
	[ 6742.345909] md: rdev superblock:
	[ 6742.345914] md:  SB: (V:0.90.0) ID:<42ef13c7.598c059a.5f9f1645.801e9ee6> CT:4919856d
	[ 6742.345918] md:     L5 S00065472 ND:4 RD:4 md1 LO:2 CS:65536
	[ 6742.345922] md:     UT:4919856d ST:1 AD:4 WD:4 FD:0 SD:0 CSUM:b7992907 E:00000001
	[ 6742.345924]      D  0:  DISK<N:0,(1,8),R:0,S:6>
	[ 6742.345930]      D  1:  DISK<N:1,(1,10),R:1,S:6>
	[ 6742.345933]      D  2:  DISK<N:2,(1,12),R:2,S:6>
	[ 6742.345937]      D  3:  DISK<N:3,(1,14),R:3,S:6>
	[ 6742.345942] md:     THIS:  DISK<N:3,(1,14),R:3,S:6>
	...
	[ 6742.346058] md0: <ram3><ram2><ram1><ram0>
	[ 6742.346067] md: rdev ram3, SZ:00065472 F:0 S:1 DN:3
	[ 6742.346070] md: rdev superblock:
	[ 6742.346073] md:  SB: (V:1.0.0) ID:<369aad81.00000000.00000000.00000000> CT:9a322a9c
	[ 6742.346077] md:     L-1507699579 S976570180 ND:48 RD:0 md0 LO:65536 CS:196610
	[ 6742.346081] md:     UT:00000018 ST:0 AD:131048 WD:0 FD:8 SD:0 CSUM:00000000 E:00000000
	[ 6742.346084]      D  0:  DISK<N:-1,(-1,-1),R:-1,S:-1>
	[ 6742.346089]      D  1:  DISK<N:-1,(-1,-1),R:-1,S:-1>
	[ 6742.346092]      D  2:  DISK<N:-1,(-1,-1),R:-1,S:-1>
	[ 6742.346096]      D  3:  DISK<N:-1,(-1,-1),R:-1,S:-1>
	[ 6742.346102] md:     THIS:  DISK<N:0,(0,0),R:0,S:0>
	...
	[ 6742.346219] md:	**********************************
	[ 6742.346221]

Here md1 is metadata 0.90.0, and md0 is metadata 1.2

After some more code to distinguish these two types of superblock, in this patch,

it will generate dump information like:

	[ 7906.755790]
	[ 7906.755799] md:	**********************************
	[ 7906.755802] md:	* <COMPLETE RAID STATE PRINTOUT> *
	[ 7906.755804] md:	**********************************
	[ 7906.755808] md1: <ram7><ram6><ram5><ram4>
	[ 7906.755819] md: rdev ram7, SZ:00065472 F:0 S:1 DN:3
	[ 7906.755821] md: rdev superblock (MJ:0):
	[ 7906.755826] md:  SB: (V:0.90.0) ID:<3fca7a0d.a612bfed.5f9f1645.801e9ee6> CT:491989f3
	[ 7906.755830] md:     L5 S00065472 ND:4 RD:4 md1 LO:2 CS:65536
	[ 7906.755834] md:     UT:491989f3 ST:1 AD:4 WD:4 FD:0 SD:0 CSUM:00fb52ad E:00000001
	[ 7906.755836]      D  0:  DISK<N:0,(1,8),R:0,S:6>
	[ 7906.755842]      D  1:  DISK<N:1,(1,10),R:1,S:6>
	[ 7906.755845]      D  2:  DISK<N:2,(1,12),R:2,S:6>
	[ 7906.755849]      D  3:  DISK<N:3,(1,14),R:3,S:6>
	[ 7906.755855] md:     THIS:  DISK<N:3,(1,14),R:3,S:6>
	...
	[ 7906.755972] md0: <ram3><ram2><ram1><ram0>
	[ 7906.755981] md: rdev ram3, SZ:00065472 F:0 S:1 DN:3
	[ 7906.755984] md: rdev superblock (MJ:1):
	[ 7906.755989] md:  SB: (V:1) (F:0) Array-ID:<5fbcf158:55aa:5fbe:9a79:1e939880dcbd>
	[ 7906.755990] md:    Name: "DG5:0" CT:1226410480
	[ 7906.755998] md:       L5 SZ130944 RD:4 LO:2 CS:128 DO:24 DS:131048 SO:8 RO:0
	[ 7906.755999] md:     Dev:00000003 UUID: 9194d744:87f7:a448:85f2:7497b84ce30a
	[ 7906.756001] md:       (F:0) UT:1226410480 Events:0 ResyncOffset:-1 CSUM:0dbcd829
	[ 7906.756003] md:         (MaxDev:384)
	...
	[ 7906.756113] md:	**********************************
	[ 7906.756116]

this md0 (metadata 1.2) information dumping is exactly according to struct
mdp_superblock_1.

Signed-off-by: Cheng Renquan <crquan@gmail.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Dan Williams <dan.j.williams@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09 08:31:08 +11:00
Cheng Renquan
159ec1fc06 md: use list_for_each_entry macro directly
The rdev_for_each macro defined in <linux/raid/md_k.h> is identical to
list_for_each_entry_safe, from <linux/list.h>, it should be defined to
use list_for_each_entry_safe, instead of reinventing the wheel.

But some calls to each_entry_safe don't really need a safe version,
just a direct list_for_each_entry is enough, this could save a temp
variable (tmp) in every function that used rdev_for_each.

In this patch, most rdev_for_each loops are replaced by list_for_each_entry,
totally save many tmp vars; and only in the other situations that will call
list_del to delete an entry, the safe version is used.

Signed-off-by: Cheng Renquan <crquan@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09 08:31:08 +11:00
Andre Noll
ccacc7d2cf md: raid0: make hash_spacing and preshift sector-based.
This patch renames the hash_spacing and preshift members of struct
raid0_private_data to spacing and sector_shift respectively and
changes the semantics as follows:

We always have spacing = 2 * hash_spacing. In case
sizeof(sector_t) > sizeof(u32) we also have sector_shift = preshift + 1
while sector_shift = preshift = 0 otherwise.

Note that the values of nb_zone and zone are unaffected by these changes
because in the sector_div() preceeding the assignement of these two
variables both arguments double.

Signed-off-by: Andre Noll <maan@systemlinux.org>
Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09 08:31:08 +11:00
Andre Noll
83838ed878 md: raid0: Represent the size of strip zones in sectors.
This completes the block -> sector conversion of struct strip_zone.

Signed-off-by: Andre Noll <maan@systemlinux.org>
Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09 08:31:07 +11:00
Andre Noll
0825b87a7d md: raid0 create_strip_zones(): Add KERN_INFO/KERN_ERR to printk's.
This patch consists only of these trivial changes.

Signed-off-by: Andre Noll <maan@systemlinux.org>
Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09 08:31:07 +11:00
Andre Noll
6b8796cc3d md: raid0 create_strip_zones(): Make two local variables sector-based.
current_offset and curr_zone_offset stored the corresponding offsets
as 1K quantities. Rename them to current_start and curr_zone_start
to match the naming of struct strip_zone and store the offsets as
sector counts.

Also, add KERN_INFO to the printk() affected by this change to make
checkpatch happy.

Signed-off-by: Andre Noll <maan@systemlinux.org>
Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09 08:31:07 +11:00
Andre Noll
6199d3db0f md: raid0: Represent zone->zone_offset in sectors.
For the same reason as in the previous patch, rename it from zone_offset
to zone_start.

Signed-off-by: Andre Noll <maan@systemlinux.org>
Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09 08:31:07 +11:00
Andre Noll
019c4e2f3e md: raid0: Represent device offset in sectors.
Rename zone->dev_offset to zone->dev_start to make sure all users
have been converted.

Signed-off-by: Andre Noll <maan@systemlinux.org>
Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09 08:31:06 +11:00
Andre Noll
e0f0686834 md: raid0_make_request(): Replace local variable block by sector.
This change already simplifies the code a bit.

Signed-off-by: Andre Noll <maan@systemlinux.org>
Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09 08:31:06 +11:00
Andre Noll
a471200595 md: raid0_make_request(): Remove local variable chunk_size.
We might as well use chunk_sects instead.

Signed-off-by: Andre Noll <maan@systemlinux.org>
Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09 08:31:06 +11:00
Andre Noll
1b7fdf8ff7 md: raid0_make_request(): Replace chunksize_bits by chunksect_bits.
As ffz(~(2 * x)) = ffz(~x) + 1, we have

	chunksect_bits = chunksize_bits + 1.

Fixup all users accordingly.

Signed-off-by: Andre Noll <maan@systemlinux.org>
Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09 08:31:06 +11:00
NeilBrown
0c3573f19d md: use sysfs_notify_dirent to notify changes to md/sync_action.
There is no compelling need for this, but sysfs_notify_dirent is a
nicer interface and the change is good for consistency.

Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09 08:31:05 +11:00
NeilBrown
538452700d md: fix bitmap-on-external-file bug.
commit a2ed9615e3
fixed a bug with 'internal' bitmaps, but in the process broke
'in a file' bitmaps.  So they are broken in 2.6.28

This fixes it, and needs to go in 2.6.28-stable.

Signed-off-by: NeilBrown <neilb@suse.de>
Cc: stable@kernel.org
2009-01-09 08:31:05 +11:00
Jonathan Brassow
a159c1ac5f dm snapshot: extend exception store functions
Supply dm_add_exception as a callback to the read_metadata function.
Add a status function ready for a later patch and name the functions
consistently.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-01-06 03:05:19 +00:00
Alasdair G Kergon
4db6bfe02b dm snapshot: split out exception store implementations
Move the existing snapshot exception store implementations out into
separate files.  Later patches will place these behind a new
interface in preparation for alternative implementations.

Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-01-06 03:05:17 +00:00
Jonathan Brassow
1ae25f9c93 dm snapshot: rename struct exception_store
Rename struct exception_store to dm_exception_store.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-01-06 03:05:16 +00:00
Jonathan Brassow
aea53d92f7 dm snapshot: separate out exception store interface
Pull structures that bridge the gap between snapshot and
exception store out of dm-snap.h and put them in a new
.h file - dm-exception-store.h.  This file will define the
API for new exception stores.

Ultimately, dm-snap.h is unnecessary, since only dm-snap.c
should be using it.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-01-06 03:05:15 +00:00
Alasdair G Kergon
fe9cf30eb8 dm mpath: move trigger_event to system workqueue
The same workqueue is used both for sending uevents and processing queued I/O.
Deadlock has been reported in RHEL5 when sending a uevent was blocked waiting
for the queued I/O to be processed.  Use scheduled_work() for the asynchronous
uevents instead.

Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-01-06 03:05:13 +00:00
Milan Broz
784aae735d dm: add name and uuid to sysfs
Implement simple read-only sysfs entry for device-mapper block device.

This patch adds a simple sysfs directory named "dm" under block device
properties and implements
	- name attribute (string containing mapped device name)
	- uuid attribute (string containing UUID, or empty string if not set)

The kobject is embedded in mapped_device struct, so no additional
memory allocation is needed for initializing sysfs entry.

During the processing of sysfs attribute we need to lock mapped device
which is done by a new function dm_get_from_kobj, which returns the md
associated with kobject and increases the usage count.

Each 'show attribute' function is responsible for its own locking.

Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-01-06 03:05:12 +00:00
Mikulas Patocka
d58168763f dm table: rework reference counting
Rework table reference counting.

The existing code uses a reference counter. When the last reference is
dropped and the counter reaches zero, the table destructor is called.
Table reference counters are acquired/released from upcalls from other
kernel code (dm_any_congested, dm_merge_bvec, dm_unplug_all).
If the reference counter reaches zero in one of the upcalls, the table
destructor is called from almost random kernel code.

This leads to various problems:
* dm_any_congested being called under a spinlock, which calls the
  destructor, which calls some sleeping function.
* the destructor attempting to take a lock that is already taken by the
  same process.
* stale reference from some other kernel code keeps the table
  constructed, which keeps some devices open, even after successful
  return from "dmsetup remove". This can confuse lvm and prevent closing
  of underlying devices or reusing device minor numbers.

The patch changes reference counting so that the table destructor can be
called only at predetermined places.

The table has always exactly one reference from either mapped_device->map
or hash_cell->new_map. After this patch, this reference is not counted
in table->holders.  A pair of dm_create_table/dm_destroy_table functions
is used for table creation/destruction.

Temporary references from the other code increase table->holders. A pair
of dm_table_get/dm_table_put functions is used to manipulate it.

When the table is about to be destroyed, we wait for table->holders to
reach 0. Then, we call the table destructor.  We use active waiting with
msleep(1), because the situation happens rarely (to one user in 5 years)
and removing the device isn't performance-critical task: the user doesn't
care if it takes one tick more or not.

This way, the destructor is called only at specific points
(dm_table_destroy function) and the above problems associated with lazy
destruction can't happen.

Finally remove the temporary protection added to dm_any_congested().

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-01-06 03:05:10 +00:00
Andi Kleen
ab4c142488 dm: support barriers on simple devices
Implement barrier support for single device DM devices

This patch implements barrier support in DM for the common case of dm linear
just remapping a single underlying device. In this case we can safely
pass the barrier through because there can be no reordering between
devices.

 NB. Any DM device might cease to support barriers if it gets
     reconfigured so code must continue to allow for a possible
     -EOPNOTSUPP on every barrier bio submitted.  - agk

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-01-06 03:05:09 +00:00
Kiyoshi Ueda
8fbf26ad5b dm request: add caches
This patch prepares some kmem_caches for request-based dm.

Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-01-06 03:05:06 +00:00
Milan Broz
23d39f63aa dm ioctl: allow dm_copy_name_and_uuid to return only one field
Allow NULL buffer in dm_copy_name_and_uuid if you only want to return one of
the fields.

(Required by a following patch that adds these fields to sysfs.)

Signed-off-by: Milan Broz <mbroz@redhat.com>
Reviewed-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-01-06 03:05:04 +00:00
Milan Broz
ac1f0ac22c dm log: ensure log bitmap fits on log device
Check that the log bitmap will fit within the log device.

Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-01-06 03:05:02 +00:00
Milan Broz
2045e88edb dm log: move region_size validation
Move log size validation from mirror target to log constructor.

Removed PAGE_SIZE restriction we no longer think necessary.

Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-01-06 03:05:01 +00:00
Takahiro Yasui
6f3af01cb0 dm log: avoid reinitialising io_req on every operation
rw_header function updates three members of io_req data every time
when I/O is processed. bi_rw and notify.fn are never modified once
they get initialized, and so they can be set in advance.

header_to_disk() can also be pulled out of write_header() since only one
caller needs it and write_header() can be replaced by rw_header()
directly.

Signed-off-by: Takahiro Yasui <tyasui@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-01-06 03:04:59 +00:00
Mikulas Patocka
10d3bd09a3 dm: consolidate target deregistration error handling
Change dm_unregister_target to return void and use BUG() for error
reporting.

dm_unregister_target can only fail because of programming bug in the
target driver. It can't fail because of user's behavior or disk errors.

This patch changes unregister_target to return void and use BUG if
someone tries to unregister non-registered target or unregister target
that is in use.

This patch removes code duplication (testing of error codes in all dm
targets) and reports bugs in just one place, in dm_unregister_target. In
some target drivers, these return codes were ignored, which could lead
to a situation where bugs could be missed.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-01-06 03:04:58 +00:00
Jonathan Brassow
d460c65a6a dm raid1: fix error count
Always increase the error count when I/O on a leg of a mirror fails.

The error count is used to decide whether to select an alternative
mirror leg.  If the target doesn't use the "handle_errors" feature, the
error count is not updated and the bio can get requeued forever by the
read callback.

Fix it by increasing error_count before the handle_errors feature
checking.

Cc: stable@kernel.org
Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-01-06 03:04:57 +00:00
Takahiro Yasui
c7a2bd19b7 dm log: fix dm_io_client leak on error paths
In create_log_context function, dm_io_client_destroy function needs
to be called, when memory allocation of disk_header, sync_bits and
recovering_bits failed, but dm_io_client_destroy is not called.

Cc: stable@kernel.org
Signed-off-by: Takahiro Yasui <tyasui@redhat.com>
Acked-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-01-06 03:04:56 +00:00
Mikulas Patocka
90fa1527bd dm snapshot: change yield to msleep
Change yield() to msleep(1). If the thread had realtime priority,
yield() doesn't really yield, so the yielding process would loop
indefinitely and cause machine lockup.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-01-06 03:04:54 +00:00
Mikulas Patocka
a1b51e9867 dm table: drop reference at unbind
Move one dm_table_put() so that the last reference in the thread
gets dropped in __unbind().

This is required for a following patch,
dm-table-rework-reference-counting.patch, which will change the logic in
such a way that table destructor is called only at specific points in
the code.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-01-06 03:04:53 +00:00
Jens Axboe
bb799ca020 bio: allow individual slabs in the bio_set
Instead of having a global bio slab cache, add a reference to one
in each bio_set that is created. This allows for personalized slabs
in each bio_set, so that they can have bios of different sizes.

This means we can personalize the bios we return. File systems may
want to embed the bio inside another structure, to avoid allocation
more items (and stuffing them in ->bi_private) after the get a bio.
Or we may want to embed a number of bio_vecs directly at the end
of a bio, to avoid doing two allocations to return a bio. This is now
possible.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-12-29 08:29:23 +01:00
Ingo Molnar
db8862eafe Merge branch 'linus' into tracing/hw-branch-tracing 2008-12-24 21:08:26 +01:00
NeilBrown
a2ed9615e3 md: Don't read past end of bitmap when reading bitmap.
When we read the write-intent-bitmap off the device, we currently
read a whole number of pages.
When PAGE_SIZE is 4K, this works due to the alignment we enforce
on the superblock and bitmap.
When PAGE_SIZE is 64K, this case read past the end-of-device
which causes an error.

When we write the superblock, we ensure to clip the last page
to just be the required size.  Copy that code into the read path
to just read the required number of sectors.

Signed-off-by: Neil Brown <neilb@suse.de>
Cc: stable@kernel.org
2008-12-19 16:25:01 +11:00
Ingo Molnar
970987beb9 Merge branches 'tracing/ftrace', 'tracing/function-graph-tracer' and 'tracing/urgent' into tracing/core 2008-12-05 14:45:22 +01:00
Milan Broz
0e435ac26e block: fix setting of max_segment_size and seg_boundary mask
Fix setting of max_segment_size and seg_boundary mask for stacked md/dm
devices.

When stacking devices (LVM over MD over SCSI) some of the request queue
parameters are not set up correctly in some cases by default, namely
max_segment_size and and seg_boundary mask.

If you create MD device over SCSI, these attributes are zeroed.

Problem become when there is over this mapping next device-mapper mapping
- queue attributes are set in DM this way:

request_queue   max_segment_size  seg_boundary_mask
SCSI                65536             0xffffffff
MD RAID1                0                      0
LVM                 65536                 -1 (64bit)

Unfortunately bio_add_page (resp.  bio_phys_segments) calculates number of
physical segments according to these parameters.

During the generic_make_request() is segment cout recalculated and can
increase bio->bi_phys_segments count over the allowed limit.  (After
bio_clone() in stack operation.)

Thi is specially problem in CCISS driver, where it produce OOPS here

    BUG_ON(creq->nr_phys_segments > MAXSGENTRIES);

(MAXSEGENTRIES is 31 by default.)

Sometimes even this command is enough to cause oops:

  dd iflag=direct if=/dev/<vg>/<lv> of=/dev/null bs=128000 count=10

This command generates bios with 250 sectors, allocated in 32 4k-pages
(last page uses only 1024 bytes).

For LVM layer, it allocates bio with 31 segments (still OK for CCISS),
unfortunatelly on lower layer it is recalculated to 32 segments and this
violates CCISS restriction and triggers BUG_ON().

The patch tries to fix it by:

 * initializing attributes above in queue request constructor
   blk_queue_make_request()

 * make sure that blk_queue_stack_limits() inherits setting

 (DM uses its own function to set the limits because it
 blk_queue_stack_limits() was introduced later.  It should probably switch
 to use generic stack limit function too.)

 * sets the default seg_boundary value in one place (blkdev.h)

 * use this mask as default in DM (instead of -1, which differs in 64bit)

Bugs related to this:
https://bugzilla.redhat.com/show_bug.cgi?id=471639
http://bugzilla.kernel.org/show_bug.cgi?id=8672

Signed-off-by: Milan Broz <mbroz@redhat.com>
Reviewed-by: Alasdair G Kergon <agk@redhat.com>
Cc: Neil Brown <neilb@suse.de>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Tejun Heo <htejun@gmail.com>
Cc: Mike Miller <mike.miller@hp.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-12-03 12:55:55 +01:00
Ingo Molnar
0bfc24559d blktrace: port to tracepoints, update
Port to the new tracepoints API: split DEFINE_TRACE() and DECLARE_TRACE()
sites. Spread them out to the usage sites, as suggested by
Mathieu Desnoyers.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
2008-11-26 13:04:35 +01:00
Arnaldo Carvalho de Melo
5f3ea37c77 blktrace: port to tracepoints
This was a forward port of work done by Mathieu Desnoyers, I changed it to
encode the 'what' parameter on the tracepoint name, so that one can register
interest in specific events and not on classes of events to then check the
'what' parameter.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-26 12:13:34 +01:00
Chandra Seetharaman
8a57dfc6f9 dm: avoid destroying table in dm_any_congested
dm_any_congested() just checks for the DMF_BLOCK_IO and has no
code to make sure that suspend waits for dm_any_congested() to
complete.  This patch adds such a check.

Without it, a race can occur with dm_table_put() attempting to
destroying the table in the wrong thread, the one running
dm_any_congested() which is meant to be quick and return
immediately.

Two examples of problems:
1. Sleeping functions called from congested code, the caller
   of which holds a spin lock.
2. An ABBA deadlock between pdflush and multipathd. The two locks
   in contention are inode lock and kernel lock.

Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-11-13 23:39:14 +00:00
Mikulas Patocka
d221d2e776 dm: move pending queue wake_up end_io_acct
This doesn't fix any bug, just moves wake_up immediately after decrementing
md->pending, for better code readability.

It must be clear to anyone manipulating md->pending to wake up
the queue if md->pending reaches zero, so move the wakeup as close to
the decrementing as possible.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-11-13 23:39:10 +00:00
Chandra Seetharaman
14e98c5ca8 dm mpath: warn if args ignored
Currently dm ignores the parameters provided to hardware handlers
without providing any notifications to the user.

This patch just prints a warning message so that the user knows that
the arguments are ignored.

Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-11-13 23:39:06 +00:00
Chandra Seetharaman
b81aa1c792 dm mpath: avoid attempting to activate null path
Path activation code is called even when the pgpath is NULL. This could
lead to a panic in activate_path(). Such a panic is seen in -rt kernel.

This problem has been there before the pg_init() was moved to a
workqueue.

Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-11-13 23:39:00 +00:00