Commit Graph

4290 Commits

Author SHA1 Message Date
Linus Torvalds
932adbed6d Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ASoC: Fix SND_SOC_ALL_CODECS handling of dual SPI and I2C control buses
  ASoC: Use snd_soc_dapm_nc_pin() in at91sam9g20ek
  ASoC: TWL4030: Convert the bitfield enums to VALUE_ENUM type
  ASoC: New enum type: value_enum
  pxa2xx-ac97: switch AC unit to correct state before probing
  ASoC: Clocking fixes for davinci-evm.c
  ASoC: Mark non-connected TWL4030 pins for pandora
  ASoC: OMAP: Select OMAP pin multiplexing when using Nokia N810 ASoC drivers
2009-01-06 17:09:51 -08:00
Laurent Pinchart
f41ced8f10 Check fops_get() return value
Several subsystem open handlers dereference the fops_get() return value
without checking it for nullness.  This opens a race condition between the
open handler and module unloading.

A module can be marked as being unloaded (MODULE_STATE_GOING) before its
exit function is called and gets the chance to unregister the driver.
During that window open handlers can still be called, and fops_get() will
fail in try_module_get() and return a NULL pointer.

This change checks the fops_get() return value and returns -ENODEV if NULL.

Reported-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Acked-by: Takashi Iwai <tiwai@suse.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dave Airlie <airlied@linux.ie>
Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 15:59:11 -08:00
Takashi Iwai
1679681990 Merge branch 'topic/asoc' into for-linus 2009-01-06 16:33:52 +01:00
Mark Brown
227b4dc643 ASoC: Fix SND_SOC_ALL_CODECS handling of dual SPI and I2C control buses
For codecs that have both SPI and I2C support we need to ensure that we
don't try to make the codec driver built in when I2C is modular since
that won't link.  Do this by creating a helper variable which uses
conditional defaults to pick up the correct value for all combinations.

We don't need to do anything special for I2C-only codecs since a
conditional select passes on the full value for a tristate.

Reported-by: Ingo Molnar <mingo@elte.hu>
Tested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-01-06 14:23:10 +00:00
Mark Brown
8c0bad7fa5 ASoC: Use snd_soc_dapm_nc_pin() in at91sam9g20ek
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-01-06 09:52:18 +00:00
Takashi Iwai
5439e726b5 Merge branch 'topic/asoc' into for-linus 2009-01-06 09:48:51 +01:00
Peter Ujfalusi
2f42357722 ASoC: TWL4030: Convert the bitfield enums to VALUE_ENUM type
Convert the bitfield coded enums to the new VALUE_ENUM type.
Remove the enum check, since the VALUE_ENUM type can handle
the bitfield coding and also handles the 'holes' in the bitfield.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-01-05 17:47:17 +00:00
Peter Ujfalusi
2e72f8e371 ASoC: New enum type: value_enum
This patch introduces a new enum type.
In this enum type each enumerated items referred with a value.

This new enum type can handle enums encoded in bitfield, or any other
weird ways. twl4030 codec has several mux selection register, where the
input/output mux is coded in a bitfield. With the normal enum type this type
of mux can not be handled in a clean way.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-01-05 17:47:17 +00:00
Dmitry Baryshkov
7961233688 pxa2xx-ac97: switch AC unit to correct state before probing
If AC97 unit is in partially enabled state, early request_irq can trigger
IRQ storm or even full hang up. Workaround this by forcibly switching ACLINK off
at the start of the probe.

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-01-05 17:47:17 +00:00
David Brownell
05d5e991a7 ASoC: Clocking fixes for davinci-evm.c
Let's have audio playback not sound like chipmunks, 'k? :)

ASP1 on the DM355 EVM uses a 27 MHz external audio clock, not
the slower clock used with ASP0 on the DM6446 EVM.

Also, that slower ASP0 clock on the DM6446 is 12.288 MHz,
not 22.5792 MHz ... 48 KHz sample rate (x256), not a double
speed 44.1 KHz sample rate (which could be done, but isn't
what the board init code now sets up).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-01-05 17:47:17 +00:00
Grazvydas Ignotas
7f185340da ASoC: Mark non-connected TWL4030 pins for pandora
Pandora has all TWL4030 output pins floating, it uses
external DAC for playback. Mark those outputs as not
connected using DAPM calls.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-01-05 17:47:16 +00:00
Jarkko Nikula
d304c6ef6e ASoC: OMAP: Select OMAP pin multiplexing when using Nokia N810 ASoC drivers
N810 bootloader muxes I2S pins for OMAP2420 EAC block while N810 ASoC
drivers are using McBSP block so the kernel have to change configuration
runtime.

Author has not seen problems using kernel pin multiplexing on N810 but very
many times unworking audio after forgotten to enable it and spending
15 minutes each time to figure it out again...

This change makes it easier for other users as well. If problems arise, then
they are better to find and fix in OMAP pin multiplexing framework.

Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-01-05 17:47:16 +00:00
Takashi Iwai
3a5e1d1792 Merge branch 'topic/misc' into for-linus 2009-01-05 18:34:25 +01:00
Takashi Iwai
9d7eff608d Merge branch 'topic/asoc' into for-linus 2009-01-05 18:34:21 +01:00
Takashi Iwai
cad9d90ec3 Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6 into topic/asoc 2009-01-05 18:31:38 +01:00
Alan Horstmann
8eca75382e ALSA: ice1724 - Fix a typo in IEC958 PCM name
Fix trivial name string typo as reported in bug 2552.

Signed-off-by: Alan Horstmann <gineera@aspect135.co.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-05 18:30:04 +01:00
David Brownell
5cf1c00b0e ASoC: fix davinci-sffsdr buglet
Minor bugfix:  now that DaVinci kernels can support multiple
boards, board-specific ASoC components need to verify they're
running on the right board before initializing.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-01-05 13:09:31 +00:00
Takashi Iwai
cd8faac38c Merge branch 'topic/usbaudio' into for-linus 2009-01-05 10:53:58 +01:00
Takashi Iwai
8924c671b6 Merge branch 'topic/hda' into for-linus 2009-01-05 10:53:46 +01:00
Takashi Iwai
ab05e29026 Merge branch 'topic/asoc' into for-linus 2009-01-05 10:53:43 +01:00
Julia Lawall
913ae5a24e ALSA: sound/usb: Use negated usb_endpoint_xfer_control, etc
This patch extends 42a6e66f1e by using
usb_endpoint_xfer_control, usb_endpoint_xfer_isoc, usb_endpoint_xfer_bulk,
and usb_endpoint_xfer_int in the negated case as well.

This patch also rewrites some calls to usb_endpoint_dir_in as negated calls
to !usb_endpoint_dir_out, and vice versa, to better correspond to the
intent of the original code.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@ struct usb_endpoint_descriptor *epd; @@

- (usb_endpoint_type(epd) != \(USB_ENDPOINT_XFER_CONTROL\|0\))
+ !usb_endpoint_xfer_control(epd)

@@ struct usb_endpoint_descriptor *epd; @@

- (usb_endpoint_type(epd) != \(USB_ENDPOINT_XFER_ISOC\|1\))
+ !usb_endpoint_xfer_isoc(epd)

@@ struct usb_endpoint_descriptor *epd; @@

- (usb_endpoint_type(epd) != \(USB_ENDPOINT_XFER_BULK\|2\))
+ !usb_endpoint_xfer_bulk(epd)

@@ struct usb_endpoint_descriptor *epd; @@

- (usb_endpoint_type(epd) != \(USB_ENDPOINT_XFER_INT\|3\))
+ !usb_endpoint_xfer_int(epd)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-04 12:10:04 +01:00
Ulrich Dangel
acf26c0cad ALSA: hda - cxt5051 report jack state
Signed-off-by: Ulrich Dangel <uli@spamt.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-03 11:26:05 +01:00
Ulrich Dangel
bc7a166dd1 ALSA: hda - add basic jack reporting functions to patch_conexant.c
Added functions to report jack sense.
As CXT5051_PORTB_EVENT has the same value as CONEXANT_MIC_EVENT two input
devices for the microphone will be created if using CXT5051.

Signed-off-by: Ulrich Dangel <uli@spamt.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-03 11:25:44 +01:00
Hans Verkuil
069b747931 V4L/DVB (10138): v4l2-ioctl: change to long return type to match unlocked_ioctl.
Since internal to v4l2 the ioctl prototype is the same regardless of it
being called through .ioctl or .unlocked_ioctl, we need to convert it all
to the long return type of unlocked_ioctl.

Thanks to Jean-Francois Moine for posting an initial patch for this and
thus bringing it to our attention.

Cc: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-02 17:11:34 -02:00
Hans Verkuil
bec43661b1 V4L/DVB (10135): v4l2: introduce v4l2_file_operations.
Introduce a struct v4l2_file_operations for v4l2 drivers.

Remove the unnecessary inode argument.

Move compat32 handling (and llseek) into the v4l2-dev core: this is now
handled in the v4l2 core and no longer in the drivers themselves.

Note that this changeset reverts an earlier patch that changed the return
type of__video_ioctl2 from int to long. This change will be reinstated
later in a much improved version.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-02 17:11:12 -02:00
Julia Lawall
f4e9749f45 ALSA: Use usb_set/get_intfdata
Use the USB functions usb_get_intfdata and usb_set_intfdata instead of
dev_get_drvdata and dev_set_drvdata, respectively.

The semantic patch that makes this change for the usb_get_intfdata case is
as follows: (http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@header@
@@

#include <linux/usb.h>

@same depends on header@
position p;
@@

usb_get_intfdata@p(...) { ... }

@depends on header@
position _p!=same.p;
identifier _f;
struct usb_interface*intf;
@@

_f@_p(...) { <+...
- dev_get_drvdata(&intf->dev)
+ usb_get_intfdata(intf)
...+> }
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-02 11:52:45 +01:00
Mark Brown
ac11a2b35c ASoC: Clean up kerneldoc warnings
Almost all parameters that have been misnamed in the comments.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-01-01 12:18:17 +00:00
Stephen Ware
9bef6489d7 ASoC: Fix pxa2xx-pcm checks for invalid DMA channels
Set the invalid dma channel to -1 (and check properly for it) in
pxa2xx_pcm_hw_free().  Was assuming 0 is an invalid channel number but 0
is a valid pxa dma channel num.

Signed-off-by: stephen <stephen.ware@eqware.net>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-01-01 11:52:48 +00:00
Chris Bagwell
06bf3e15f6 LSA: hda - Add HP Acacia detection
Add automatic mapping of HP Acacia motherboards to 3stack-hp.  Allows
for greater then 2 channel audio by enabling Channel Mode option in mixer.

Motherboard specs:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01321559&lc=en&dlc=en&cc=us&product=3829353&os=2093&lang=en#

Signed-off-by: Chris Bagwell <chris at cnpbagwell dot com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-01 10:32:08 +01:00
Wu Fengguang
3fea2cb045 ALSA: hda - fix name for ALC1200
Move the more specific preset for ALC1200 above the general one for
ALC888, so that it will have the chance to get matched and selected.

Reported-by: Thomas Schneider <nailstudio@gmx.net>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-01 10:28:59 +01:00
Julia Lawall
42a6e66f1e ALSA: sound/usb: use USB API functions rather than constants
This set of patches introduces calls to the following set of functions:

usb_endpoint_dir_in(epd)
usb_endpoint_dir_out(epd)
usb_endpoint_is_bulk_in(epd)
usb_endpoint_is_bulk_out(epd)
usb_endpoint_is_int_in(epd)
usb_endpoint_is_int_out(epd)
usb_endpoint_num(epd)
usb_endpoint_type(epd)
usb_endpoint_xfer_bulk(epd)
usb_endpoint_xfer_control(epd)
usb_endpoint_xfer_int(epd)
usb_endpoint_xfer_isoc(epd)

In some cases, introducing one of these functions is not possible, and it
just replaces an explicit integer value by one of the following constants:

USB_ENDPOINT_XFER_BULK
USB_ENDPOINT_XFER_CONTROL
USB_ENDPOINT_XFER_INT
USB_ENDPOINT_XFER_ISOC

An extract of the semantic patch that makes these changes is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r1@ struct usb_endpoint_descriptor *epd; @@

- ((epd->bmAttributes & \(USB_ENDPOINT_XFERTYPE_MASK\|3\)) ==
- \(USB_ENDPOINT_XFER_CONTROL\|0\))
+ usb_endpoint_xfer_control(epd)

@r5@ struct usb_endpoint_descriptor *epd; @@

- ((epd->bEndpointAddress & \(USB_ENDPOINT_DIR_MASK\|0x80\)) ==
-  \(USB_DIR_IN\|0x80\))
+ usb_endpoint_dir_in(epd)

@inc@
@@

#include <linux/usb.h>

@depends on !inc && (r1||r5)@
@@

+ #include <linux/usb.h>
  #include <linux/usb/...>
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-01 10:27:33 +01:00
Peter Ujfalusi
276c62225a ASoC: TWL4030: DAPM based capture implementation
This patch adds DAPM implementaion for the capture path
on twlx030.

TWL has two physical ADC and two digital microphone (stereo) connections.
The CPU interface has four microphone channels.
For simplicity the microphone channel paths are named as:
TX1 (Left/Right) - when using i2s mode, only the TX1 data is valid
TX2 (Left/Right)

Input routing (simplified version):
There is two levels of mux settings for TWL in input path:
Analog input mux:
 ADCL <- {Off, Main mic, Headset mic, AUXL, Carkit mic}
 ADCR <- {Off, Sub mic, AUXR}

Analog/Digital mux:
TX1 Analog mode:
 TX1L <- ADCL
 TX1R <- ADCR
TX1 Digital mode:
 TX1L <- Digimic0 (Left)
 TX1R <- Digimic0 (Right)

TX2 Analog mode:
 TX2L <- ADCL
 TX2R <- ADCR
TX2 Digital mode:
 TX2L <- Digimic1 (Left)
 TX2R <- Digimic1 (Right)

The patch provides the following user controls for the capture path:
Mux settings:
"TX1 Capture Route": {Analog, Digimic0}
"TX2 Capture Route": {Analog, Digimic1}
"Analog Left Capture Route":  {Off, Main Mic, Headset Mic, AUXL, Carkit Mic}
"Analog Right Capture Route": {Off, Sub Mic, AUXR}

Volume/Gain controls:
"TX1 Digital Capture Volume": Stereo gain control for TX1 path
"TX2 Digital Capture Volume": Stereo gain control for TX2 path
"Analog Capture Volume":      Stereo gain control for the analog path only

Important things for the board files:
Microphone bias:
"Mic Bias 1":       Bias for Main mic or for digimic0 (analog or digital path)
"Mic Bias 2":       Bias for Sub mic or for digimic1 (analog or digital path)
"Headset Mic Bias": Bias for Headset mic

When the routing configured correctly only the needed components will be
powered/enabled.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-31 13:11:59 +00:00
Peter Ujfalusi
f9a3fba2ce ASoC: TWL4030: Make the enum filter generic for twl4030
Modify the enum filter to more generic that it will filter
out the enums with text "Invalid".
The enum filter also required for the capture path.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-31 13:11:59 +00:00
Linus Torvalds
f54a6ec0fd Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (583 commits)
  V4L/DVB (10130): use USB API functions rather than constants
  V4L/DVB (10129): dvb: remove deprecated use of RW_LOCK_UNLOCKED in frontends
  V4L/DVB (10128): modify V4L documentation to be a valid XHTML
  V4L/DVB (10127): stv06xx: Avoid having y unitialized
  V4L/DVB (10125): em28xx: Don't do AC97 vendor detection for i2s audio devices
  V4L/DVB (10124): em28xx: expand output formats available
  V4L/DVB (10123): em28xx: fix reversed definitions of I2S audio modes
  V4L/DVB (10122): em28xx: don't load em28xx-alsa for em2870 based devices
  V4L/DVB (10121): em28xx: remove worthless Pinnacle PCTV HD Mini 80e device profile
  V4L/DVB (10120): em28xx: remove redundant Pinnacle Dazzle DVC 100 profile
  V4L/DVB (10119): em28xx: fix corrupted XCLK value
  V4L/DVB (10118): zoran: fix warning for a variable not used
  V4L/DVB (10116): af9013: Fix gcc false warnings
  V4L/DVB (10111a): usbvideo.h: remove an useless blank line
  V4L/DVB (10111): quickcam_messenger.c: fix a warning
  V4L/DVB (10110): v4l2-ioctl: Fix warnings when using .unlocked_ioctl = __video_ioctl2
  V4L/DVB (10109): anysee: Fix usage of an unitialized function
  V4L/DVB (10104): uvcvideo: Add support for video output devices
  V4L/DVB (10102): uvcvideo: Ignore interrupt endpoint for built-in iSight webcams.
  V4L/DVB (10101): uvcvideo: Fix bulk URB processing when the header is erroneous
  ...
2008-12-30 17:41:32 -08:00
Linus Torvalds
14a3c4ab0e Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (407 commits)
  [ARM] pxafb: add support for overlay1 and overlay2 as framebuffer devices
  [ARM] pxafb: cleanup of the timing checking code
  [ARM] pxafb: cleanup of the color format manipulation code
  [ARM] pxafb: add palette format support for LCCR4_PAL_FOR_3
  [ARM] pxafb: add support for FBIOPAN_DISPLAY by dma braching
  [ARM] pxafb: allow pxafb_set_par() to start from arbitrary yoffset
  [ARM] pxafb: allow video memory size to be configurable
  [ARM] pxa: add document on the MFP design and how to use it
  [ARM] sa1100_wdt: don't assume CLOCK_TICK_RATE to be a constant
  [ARM] rtc-sa1100: don't assume CLOCK_TICK_RATE to be a constant
  [ARM] pxa/tavorevb: update board support (smartpanel LCD + keypad)
  [ARM] pxa: Update eseries defconfig
  [ARM] 5352/1: add w90p910-plat config file
  [ARM] s3c: S3C options should depend on PLAT_S3C
  [ARM] mv78xx0: implement GPIO and GPIO interrupt support
  [ARM] Kirkwood: implement GPIO and GPIO interrupt support
  [ARM] Orion: share GPIO IRQ handling code
  [ARM] Orion: share GPIO handling code
  [ARM] s3c: define __io using the typesafe version
  [ARM] S3C64XX: Ensure CPU_V6 is selected
  ...
2008-12-30 17:36:49 -08:00
Linus Torvalds
bb758e9637 Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  hrtimers: fix warning in kernel/hrtimer.c
  x86: make sure we really have an hpet mapping before using it
  x86: enable HPET on Fujitsu u9200
  linux/timex.h: cleanup for userspace
  posix-timers: simplify de_thread()->exit_itimers() path
  posix-timers: check ->it_signal instead of ->it_pid to validate the timer
  posix-timers: use "struct pid*" instead of "struct task_struct*"
  nohz: suppress needless timer reprogramming
  clocksource, acpi_pm.c: put acpi_pm_read_slow() under CONFIG_PCI
  nohz: no softirq pending warnings for offline cpus
  hrtimer: removing all ur callback modes, fix
  hrtimer: removing all ur callback modes, fix hotplug
  hrtimer: removing all ur callback modes
  x86: correct link to HPET timer specification
  rtc-cmos: export second NVRAM bank

Fixed up conflicts in sound/drivers/pcsp/pcsp.c and sound/core/hrtimer.c
manually.
2008-12-30 16:16:21 -08:00
Igor M. Liplianin
4b29631db3 V4L/DVB (9533): cx88: Add support for TurboSight TBS8910 DVB-S PCI card
The card based on stv0299 or stv0288 demodulators.

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29 17:53:28 -02:00
Ingo Molnar
32e8d18683 Merge branches 'timers/clocksource', 'timers/hpet', 'timers/hrtimers', 'timers/nohz', 'timers/ntp', 'timers/posixtimers' and 'timers/rtc' into timers/core 2008-12-25 18:02:25 +01:00
Takashi Iwai
5ce442fe2c Merge branch 'topic/udev-id-rename' into to-push 2008-12-25 11:40:34 +01:00
Takashi Iwai
60cda2b53a Merge branch 'topic/sound-core-fix' into to-push 2008-12-25 11:40:33 +01:00
Takashi Iwai
9649745c86 Merge branch 'topic/snd-hrtimer' into to-push 2008-12-25 11:40:32 +01:00
Takashi Iwai
a9c3c7e04b Merge branch 'topic/pcxhr-update' into to-push 2008-12-25 11:40:31 +01:00
Takashi Iwai
cc4910850f Merge branch 'topic/oxygen' into to-push 2008-12-25 11:40:30 +01:00
Takashi Iwai
a802269781 Merge branch 'topic/jack-mechanical' into to-push 2008-12-25 11:40:29 +01:00
Takashi Iwai
a65056205c Merge branch 'topic/hda' into to-push 2008-12-25 11:40:28 +01:00
Takashi Iwai
313769d9ed Merge branch 'topic/cs5535audio' into to-push 2008-12-25 11:40:28 +01:00
Takashi Iwai
8afabfa74b Merge branch 'topic/convert-tasklet' into to-push 2008-12-25 11:40:27 +01:00
Takashi Iwai
86b3aa390b Merge branch 'topic/ca0106' into to-push 2008-12-25 11:40:26 +01:00
Takashi Iwai
e4456e7161 Merge branch 'topic/audigy-capture-boost' into to-push 2008-12-25 11:40:26 +01:00
Takashi Iwai
5c8261e44e Merge branch 'topic/asoc' into to-push 2008-12-25 11:40:25 +01:00