Commit Graph

2903 Commits

Author SHA1 Message Date
Oleg Nesterov
55c888d6d0 [PATCH] timers fixes/improvements
This patch tries to solve following problems:

1. del_timer_sync() is racy. The timer can be fired again after
   del_timer_sync have checked all cpus and before it will recheck
   timer_pending().

2. It has scalability problems. All cpus are scanned to determine
   if the timer is running on that cpu.

   With this patch del_timer_sync is O(1) and no slower than plain
   del_timer(pending_timer), unless it has to actually wait for
   completion of the currently running timer.

   The only restriction is that the recurring timer should not use
   add_timer_on().

3. The timers are not serialized wrt to itself.

   If CPU_0 does mod_timer(jiffies+1) while the timer is currently
   running on CPU 1, it is quite possible that local interrupt on
   CPU_0 will start that timer before it finished on CPU_1.

4. The timers locking is suboptimal. __mod_timer() takes 3 locks
   at once and still requires wmb() in del_timer/run_timers.

   The new implementation takes 2 locks sequentially and does not
   need memory barriers.

Currently ->base != NULL means that the timer is pending. In that case
->base.lock is used to lock the timer. __mod_timer also takes timer->lock
because ->base can be == NULL.

This patch uses timer->entry.next != NULL as indication that the timer is
pending. So it does __list_del(), entry->next = NULL instead of list_del()
when the timer is deleted.

The ->base field is used for hashed locking only, it is initialized
in init_timer() which sets ->base = per_cpu(tvec_bases). When the
tvec_bases.lock is locked, it means that all timers which are tied
to this base via timer->base are locked, and the base itself is locked
too.

So __run_timers/migrate_timers can safely modify all timers which could
be found on ->tvX lists (pending timers).

When the timer's base is locked, and the timer removed from ->entry list
(which means that _run_timers/migrate_timers can't see this timer), it is
possible to set timer->base = NULL and drop the lock: the timer remains
locked.

This patch adds lock_timer_base() helper, which waits for ->base != NULL,
locks the ->base, and checks it is still the same.

__mod_timer() schedules the timer on the local CPU and changes it's base.
However, it does not lock both old and new bases at once. It locks the
timer via lock_timer_base(), deletes the timer, sets ->base = NULL, and
unlocks old base. Then __mod_timer() locks new_base, sets ->base = new_base,
and adds this timer. This simplifies the code, because AB-BA deadlock is not
possible. __mod_timer() also ensures that the timer's base is not changed
while the timer's handler is running on the old base.

__run_timers(), del_timer() do not change ->base anymore, they only clear
pending flag.

So del_timer_sync() can test timer->base->running_timer == timer to detect
whether it is running or not.

We don't need timer_list->lock anymore, this patch kills it.

We also don't need barriers. del_timer() and __run_timers() used smp_wmb()
before clearing timer's pending flag. It was needed because __mod_timer()
did not lock old_base if the timer is not pending, so __mod_timer()->list_add()
could race with del_timer()->list_del(). With this patch these functions are
serialized through base->lock.

One problem. TIMER_INITIALIZER can't use per_cpu(tvec_bases). So this patch
adds global

        struct timer_base_s {
                spinlock_t lock;
                struct timer_list *running_timer;
        } __init_timer_base;

which is used by TIMER_INITIALIZER. The corresponding fields in tvec_t_base_s
struct are replaced by struct timer_base_s t_base.

It is indeed ugly. But this can't have scalability problems. The global
__init_timer_base.lock is used only when __mod_timer() is called for the first
time AND the timer was compile time initialized. After that the timer migrates
to the local CPU.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Renaud Lienhart <renaud.lienhart@free.fr>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:16 -07:00
Nick Piggin
bdd646a446 [PATCH] blk: unplug later
get_request_wait needn't unplug the device immediately.

Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Jens Axboe <axboe@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:16 -07:00
Nick Piggin
fde6ad2248 [PATCH] blk: branch hints
Sprinkle around a few branch hints in the block layer.

Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Jens Axboe <axboe@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:16 -07:00
Nick Piggin
250dccc008 [PATCH] blk: no memory barrier
This memory barrier is not needed because the waitqueue will only get waiters
on it in the following situations:

rq->count has exceeded the threshold - however all manipulations of ->count
are performed under the runqueue lock, and so we will correctly pick up any
waiter.

Memory allocation for the request fails.  In this case, there is no additional
help provided by the memory barrier.  We are guaranteed to eventually wake up
waiters because the request allocation mempool guarantees that if the mem
allocation for a request fails, there must be some requests in flight.  They
will wake up waiters when they are retired.

Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Jens Axboe <axboe@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:16 -07:00
Tejun Heo
040c928c47 [PATCH] blk: cleanup generic tag support error messages
Add KERN_ERR and __FUNCTION__ to generic tag error messages, and add a comment
in blk_queue_end_tag() which explains the silent failure path.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Acked-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:15 -07:00
Tejun Heo
f7d37d028d [PATCH] blk: remove BLK_TAGS_{PER_LONG|MASK}
Replace BLK_TAGS_PER_LONG with BITS_PER_LONG and remove unused BLK_TAGS_MASK.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Acked-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:15 -07:00
Tejun Heo
fa72b903f7 [PATCH] blk: remove blk_queue_tag->real_max_depth optimization
blk_queue_tag->real_max_depth was used to optimize out unnecessary
allocations/frees on tag resize.  However, the whole thing was very broken -
tag_map was never allocated to real_max_depth resulting in access beyond the
end of the map, bits in [max_depth..real_max_depth] were set when initializing
a map and copied when resizing resulting in pre-occupied tags.

As the gain of the optimization is very small, well, almost nill, remove the
whole thing.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Acked-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:15 -07:00
Tejun Heo
2bf0fdad51 [PATCH] blk: use find_first_zero_bit() in blk_queue_start_tag()
blk_queue_start_tag() hand-coded searching for the first zero bit in the tag
map.  Replace it with find_first_zero_bit().  With this patch,
blk_queue_star_tag() doesn't need to fill remains of tag map with 1, thus
allowing it to work properly with the next remove_real_max_depth patch.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Acked-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:15 -07:00
Domen Puncer
15d20bfd60 [PATCH] ptrace_h8300: condition bugfix
Assignment doesn't make much sense here as condition would always be true.

Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:15 -07:00
Vincent Hanquez
76381fee7e [PATCH] xen: x86_64: use more usermode macro
Make use of the user_mode macro where it's possible.  This is useful for Xen
because it will need only to redefine only the macro to a hypervisor call.

Signed-off-by: Vincent Hanquez <vincent.hanquez@cl.cam.ac.uk>
Cc: Ian Pratt <m+Ian.Pratt@cl.cam.ac.uk>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:14 -07:00
Vincent Hanquez
e9129e56e9 [PATCH] xen: x86_64: Add macro for debugreg
Add 2 macros to set and get debugreg on x86_64.  This is useful for Xen
because it will need only to redefine each macro to a hypervisor call.

Signed-off-by: Vincent Hanquez <vincent.hanquez@cl.cam.ac.uk>
Cc: Ian Pratt <m+Ian.Pratt@cl.cam.ac.uk>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:14 -07:00
Vincent Hanquez
717b594a41 [PATCH] xen: x86: Use more usermode macro
Use the user_mode macro where it's possible.

Signed-off-by: Vincent Hanquez <vincent.hanquez@cl.cam.ac.uk>
Cc: Ian Pratt <m+Ian.Pratt@cl.cam.ac.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:14 -07:00
Vincent Hanquez
fa1e1bdf78 [PATCH] xen: x86: Rename usermode macro
Rename user_mode to user_mode_vm and add a user_mode macro similar to the
x86-64 one.

This is useful for Xen because the linux xen kernel does not runs on the same
priviledge that a vanilla linux kernel, and with this we just need to redefine
user_mode().

Signed-off-by: Vincent Hanquez <vincent.hanquez@cl.cam.ac.uk>
Cc: Ian Pratt <m+Ian.Pratt@cl.cam.ac.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:14 -07:00
Vincent Hanquez
1cc6f12e03 [PATCH] xen: x86: Use new macro for debugreg
Make use of the 2 new macro set_debugreg and get_debugreg.

Signed-off-by: Vincent Hanquez <vincent.hanquez@cl.cam.ac.uk>
Cc: Ian Pratt <m+Ian.Pratt@cl.cam.ac.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:13 -07:00
Vincent Hanquez
f5012310e3 [PATCH] xen: x86: add macro for debugreg
Add 2 macros to set and get debugreg on x86.  This is useful for Xen because
it will need only to redefine each macro to a hypervisor call.

Signed-off-by: Vincent Hanquez <vincent.hanquez@cl.cam.ac.uk>
Cc: Ian Pratt <m+Ian.Pratt@cl.cam.ac.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:13 -07:00
Natalie Protasevich
701067c466 [PATCH] x86_64: avoid wasting IRQs
I suggest to change the way IRQs are handed out to PCI devices.

Currently, each I/O APIC pin gets associated with an IRQ, no matter if the
pin is used or not.  It is expected that each pin can potentually be
engaged by a device inserted into the corresponding PCI slot.  However,
this imposes severe limitation on systems that have designs that employ
many I/O APICs, only utilizing couple lines of each, such as P64H2 chipset.

It is used in ES7000, and currently, there is no way to boot the system
with more that 9 I/O APICs.

The simple change below allows to boot a system with say 64 (or more) I/O
APICs, each providing 1 slot, which otherwise impossible because of the IRQ
gaps created for unused lines on each I/O APIC.  It does not resolve the
problem with number of devices that exceeds number of possible IRQs, but
eases up a tension for IRQs on any large system with potentually large
number of devices.

I only implemented this for the ACPI boot, since if the system is this big
and using newer chipsets it is probably (better be!) an ACPI based system
:).  The change is completely "mechanical" and does not alter any internal
structures or interrupt model/implementation.  The patch works for both
i386 and x86_64 archs.  It works with MSIs just fine, and should not
intervene with implementations like shared vectors, when they get worked
out and incorporated.

To illustrate, below is the interrupt distribution for 2-cell ES7000 with
20 I/O APICs, and an Ethernet card in the last slot, which should be eth1
and which was not configured because its IRQ exceeded allowable number (it
actially turned out huge - 480!):

zorro-tb2:~ # cat /proc/interrupts
           CPU0       CPU1       CPU2       CPU3       CPU4       CPU5       CPU6       CPU7
  0:      65716      30012      30007      30002      30009      30010      30010      30010    IO-APIC-edge  timer
  4:        373          0        725        280          0          0          0          0    IO-APIC-edge  serial
  8:          0          0          0          0          0          0          0          0    IO-APIC-edge  rtc
  9:          0          0          0          0          0          0          0          0   IO-APIC-level  acpi
 14:         39          3          0          0          0          0          0          0    IO-APIC-edge  ide0
 16:        108         13          0          0          0          0          0          0   IO-APIC-level  uhci_hcd:usb1
 18:          0          0          0          0          0          0          0          0   IO-APIC-level  uhci_hcd:usb3
 19:         15          0          0          0          0          0          0          0   IO-APIC-level  uhci_hcd:usb2
 23:          3          0          0          0          0          0          0          0   IO-APIC-level  ehci_hcd:usb4
 96:       4240        397         18          0          0          0          0          0   IO-APIC-level  aic7xxx
 97:         15          0          0          0          0          0          0          0   IO-APIC-level  aic7xxx
192:        847          0          0          0          0          0          0          0   IO-APIC-level  eth0
NMI:          0          0          0          0          0          0          0          0
LOC:     273423     274528     272829     274228     274092     273761     273827     273694
ERR:          7
MIS:          0

Even though the system doesn't have that many devices, some don't get
enabled only because of IRQ numbering model.

This is the IRQ picture after the patch was applied:

zorro-tb2:~ # cat /proc/interrupts
           CPU0       CPU1       CPU2       CPU3       CPU4       CPU5       CPU6       CPU7
  0:      44169      10004      10004      10001      10004      10003      10004       6135    IO-APIC-edge  timer
  4:        345          0          0          0          0        244          0          0    IO-APIC-edge  serial
  8:          0          0          0          0          0          0          0          0    IO-APIC-edge  rtc
  9:          0          0          0          0          0          0          0          0   IO-APIC-level  acpi
 14:         39          0          3          0          0          0          0          0    IO-APIC-edge  ide0
 17:       4425          0          9          0          0          0          0          0   IO-APIC-level  aic7xxx
 18:         15          0          0          0          0          0          0          0   IO-APIC-level  aic7xxx, uhci_hcd:usb3
 21:        231          0          0          0          0          0          0          0   IO-APIC-level  uhci_hcd:usb1
 22:         26          0          0          0          0          0          0          0   IO-APIC-level  uhci_hcd:usb2
 23:          3          0          0          0          0          0          0          0   IO-APIC-level  ehci_hcd:usb4
 24:        348          0          0          0          0          0          0          0   IO-APIC-level  eth0
 25:          6        192          0          0          0          0          0          0   IO-APIC-level  eth1
NMI:          0          0          0          0          0          0          0          0
LOC:     107981     107636     108899     108698     108489     108326     108331     108254
ERR:          7
MIS:          0

Not only we see the card in the last I/O APIC, but we are not even close to
using up available IRQs, since we didn't waste any.

Signed-off-by: Natalie Protasevich <Natalie.Protasevich@unisys.com>
Acked-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:13 -07:00
Jan Beulich
32ecd42b6f [PATCH] eliminate duplicate rdpmc definition
Eliminate duplicate definition of rdpmc in x86-64's mtrr.h.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:13 -07:00
Roland McGrath
0928d6ef7f [PATCH] x86_64: never block forced SIGSEGV
This is the x86_64 version of the signal fix I just posted for i386.

This problem was first noticed on PPC and has already been fixed there.
But the exact same issue applies to other platforms in the same way.  The
signal blocking for sa_mask and the handled signal takes place after the
handler setup.  When the stack is bogus, the handler setup forces a
SIGSEGV.  But then this will be blocked, and returning to user mode will
fault again and iterate.  This patch fixes the problem by checking whether
signal handler setup failed, and not doing the signal-blocking if so.  This
copies what was done in the ppc code.  I think all architectures' signal
handler setup code follows this pattern and needs the change.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:13 -07:00
john stultz
a3a00751ad [PATCH] x86_64: fix hpet for systems that don't support legacy replacement
Currently the x86-64 HPET code assumes the entire HPET implementation from
the spec is present.  This breaks on boxes that do not implement the
optional legacy timer replacement functionality portion of the spec.

This patch fixes this issue, allowing x86-64 systems that cannot use the
HPET for the timer interrupt and RTC to still use the HPET as a time
source.  I've tested this patch on a system systems without HPET, with HPET
but without legacy timer replacement, as well as HPET with legacy timer
replacement.

This version adds a minor check to cap the HPET counter value in
gettimeoffset_hpet to avoid possible time inconsistencies.  Please ignore
the A2 version I sent to you earlier.

Acked-by: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:12 -07:00
Alexander Nyberg
c0a88c9878 [PATCH] x86_64: i8259.c iso99 structure initialization
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:12 -07:00
Andrew Morton
c92c6ffdb1 [PATCH] mtrr size-and-base debugging
Consolidate the mtrr sanity checking, add a dump_stack().

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:12 -07:00
Andrew Morton
a3a255e744 [PATCH] x86: cpu_khz type fix
x86_64's cpu_khz is unsigned int and there is no reason why x86 needs to use
unsigned long.

So make cpu_khz unsigned int on x86 as well.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:11 -07:00
Alexey Dobriyan
129f69465b [PATCH] Remove i386_ksyms.c, almost.
* EXPORT_SYMBOL's moved to other files
* #include <linux/config.h>, <linux/module.h> where needed
* #include's in i386_ksyms.c cleaned up
* After copy-paste, redundant due to Makefiles rules preprocessor directives
  removed:

	#ifdef CONFIG_FOO
	EXPORT_SYMBOL(foo);
	#endif

	obj-$(CONFIG_FOO) += foo.o

* Tiny reformat to fit in 80 columns

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:11 -07:00
Alexey Dobriyan
a9ed881796 [PATCH] x86: #include asm/uaccess.h in asm/checksum.h
csum_and_copy_to_user is static inline and uses VERIFY_WRITE.  Patch allows
to remove asm/uaccess.h from i386_ksyms.c without dependency surprises.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:11 -07:00
Aleksey Gorelov
80bb82afea [PATCH] VIA 82C586B IRQ routing fix
According to the VIA 82C586B datasheet (still available from
http://gkernel.sourceforge.net/specs/via/586b.pdf.bz2) this chip need a
special PIRQ mapping.

Signed-off-by: Karsten Keil <kkeil@suse.de>
Signed-off-by: Aleksey Gorelov <aleksey_gorelov@phoenix.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:11 -07:00
Natalie Protasevich
c434b7a6ae [PATCH] x86: avoid wasting IRQs for PCI devices
I have submitted the patch for x86_64, this is submission for i386.

The patch changes the way IRQs are handed out to PCI devices.  Currently,
each I/O APIC pin gets associated with an IRQ, no matter if the pin is used
or not.  This imposes severe limitation on systems that have designs that
employ many I/O APICs, only utilizing couple lines of each, such as P64H2
chipset.  It is used in ES7000, and currently, there is no way to boot the
system with more that 9 I/O APICs.

The simple change below allows to boot a system with say 64 (or more) I/O
APICs, each providing 1 slot, which otherwise impossible because of the IRQ
gaps created for unused lines on each I/O APIC.  It does not resolve the
problem with number of devices that exceeds number of possible IRQs, but
eases up a tension for IRQs on any large system with potentually large
number of devices.

Signed-off-by: Natalie Protasevich <Natalie.Protasevich@unisys.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:10 -07:00
Christoph Lameter
b5d23e5b8c [PATCH] ia64: Selectable Timer Interrupt Frequency
It allows a selectable timer interrupt frequency of 100, 250 and 1000 HZ.
Reducing the timer frequency may have important performance benefits on
large systems.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:10 -07:00
Christoph Lameter
5912100372 [PATCH] i386: Selectable Frequency of the Timer Interrupt
Make the timer frequency selectable. The timer interrupt may cause bus
and memory contention in large NUMA systems since the interrupt occurs
on each processor HZ times per second.

Signed-off-by: Christoph Lameter <christoph@lameter.com>
Signed-off-by: Shai Fultheim <shai@scalex86.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:10 -07:00
Jan Beulich
799d19f6ec [PATCH] allow early printk to use more than 25 lines
Allow early printk code to take advantage of the full size of the screen, not
just the first 25 lines.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Acked-by: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:10 -07:00
Jan Beulich
7fbb4f6e68 [PATCH] adjust i386 watchdog tick calculation
Get the i386 watchdog tick calculation into a state where it can also be used
on CPUs with frequencies beyond 4GHz, and it consolidates the calculation into
a single place (for potential furture adjustments).

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:09 -07:00
Natalie Protasevich
ca05fea6db [PATCH] Do not enforce unique IO_APIC_ID check for xAPIC systems (i386)
This patch is per Andi's request to remove NO_IOAPIC_CHECK from genapic and
use heuristics to prevent unique I/O APIC ID check for systems that don't
need it.  The patch disables unique I/O APIC ID check for Xeon-based and
other platforms that don't use serial APIC bus for interrupt delivery.
Andi stated that AMD systems don't need unique IO_APIC_IDs either.

Signed-off-by: Natalie Protasevich <Natalie.Protasevich@unisys.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:09 -07:00
Roland McGrath
7c1def1652 [PATCH] i386: never block forced SIGSEGV
This problem was first noticed on PPC and has already been fixed there.
But the exact same issue applies to other platforms in the same way.  The
signal blocking for sa_mask and the handled signal takes place after the
handler setup.  When the stack is bogus, the handler setup forces a
SIGSEGV.  But then this will be blocked, and returning to user mode will
fault again and iterate.  This patch fixes the problem by checking whether
signal handler setup failed, and not doing the signal-blocking if so.  This
copies what was done in the ppc code.  I think all architectures' signal
handler setup code follows this pattern and needs the change.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:09 -07:00
Christoph Lameter
1946089a10 [PATCH] NUMA aware block device control structure allocation
Patch to allocate the control structures for for ide devices on the node of
the device itself (for NUMA systems).  The patch depends on the Slab API
change patch by Manfred and me (in mm) and the pcidev_to_node patch that I
posted today.

Does some realignment too.

Signed-off-by: Justin M. Forbes <jmforbes@linuxtx.org>
Signed-off-by: Christoph Lameter <christoph@lameter.com>
Signed-off-by: Pravin Shelar <pravin@calsoftinc.com>
Signed-off-by: Shobhit Dayal <shobhit@calsoftinc.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:09 -07:00
Christoph Lameter
8c5a09082f [PATCH] x86/x86_64: pcibus_to_node
Define pcibus_to_node to be able to figure out which NUMA node contains a
given PCI device.  This defines pcibus_to_node(bus) in
include/linux/topology.h and adjusts the macros for i386 and x86_64 that
already provided a way to determine the cpumask of a pci device.

x86_64 was changed to not build an array of cpumasks anymore.  Instead an
array of nodes is build which can be used to generate the cpumask via
node_to_cpumask.

Signed-off-by: Christoph Lameter <christoph@lameter.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:08 -07:00
Christoph Lameter
e164f5573b [PATCH] ppc64: pcibus_to_node fix
asm-generic/topology.h must also be included if CONFIG_NUMA is set in order to
provide the fall back pcibus_to_node function.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:08 -07:00
Hirokazu Takata
4a35293667 [PATCH] m32r: build fix for asm-m32r/topology.h
Use asm-generic/topology.h to fix yet another pcibus_to_node() build error.

Cc: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:08 -07:00
Venkatesh Pallipadi
8a9e1b0f56 [PATCH] Platform SMIs and their interferance with tsc based delay calibration
Issue:
Current tsc based delay_calibration can result in significant errors in
loops_per_jiffy count when the platform events like SMIs
(System Management Interrupts that are non-maskable) are present. This could
lead to potential kernel panic(). This issue is becoming more visible with 2.6
kernel (as default HZ is 1000) and on platforms with higher SMI handling
latencies. During the boot time, SMIs are mostly used by BIOS (for things
like legacy keyboard emulation).

Description:
The psuedocode for current delay calibration with tsc based delay looks like
(0) Estimate a value for loops_per_jiffy
(1) While (loops_per_jiffy estimate is accurate enough)
(2)   wait for jiffy transition (jiffy1)
(3)   Note down current tsc (tsc1)
(4)   loop until tsc becomes tsc1 + loops_per_jiffy
(5)   check whether jiffy changed since jiffy1 or not and refine
loops_per_jiffy estimate

Consider the following cases
Case 1:
If SMIs happen between (2) and (3) above, we can end up with a
loops_per_jiffy value that is too low. This results in shorted delays and
kernel can panic () during boot (Mostly at IOAPIC timer initialization
timer_irq_works() as we don't have enough timer interrupts in a specified
interval).

Case 2:
If SMIs happen between (3) and (4) above, then we can end up with a
loops_per_jiffy value that is too high. And with current i386 code, too
high lpj value (greater than 17M) can result in a overflow in
delay.c:__const_udelay() again resulting in shorter delay and panic().

Solution:
The patch below makes the calibration routine aware of asynchronous events
like SMIs. We increase the delay calibration time and also identify any
significant errors (greater than 12.5%) in the calibration and notify it to
user.

Patch below changes both i386 and x86-64 architectures to use this
new and improved calibrate_delay_direct() routine.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:08 -07:00
Ian Campbell
0f8e2d62fa [PATCH] use ${CROSS_COMPILE}installkernel in arch/*/boot/install.sh
The attached patch causes the various arch specific install.sh scripts to
look for ${CROSS_COMPILE}installkernel rather than just installkernel (in
both /sbin/ and ~/bin/ where the script already did this).  This allows you
to have e.g.  arm-linux-installkernel as a handy way to install on your
cross target.  It also prevents the script picking up on the host
/sbin/installkernel which causes the script to fall through and do the
install itself (which is what I actually use myself, with $INSTALL_PATH
set).

I don't believe it causes back-compatibility problems since calling the
host installkernel was never likely to work or be what you wanted when
cross compiling anyway.  If $CROSS_COMPILE isn't set then nothing changes.

I only use ARM and i386 myself but I figured it couldn't hurt to do the
whole lot.  I've cc'd those who I hope are the arch maintainers for files
that I've touched.

Signed-off-by: Ian Campbell <icampbell@arcom.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:07 -07:00
H. Peter Anvin
d0e7feb03d [PATCH] biarch compiler support for i386
This allows the i386 architecture to be built on a system with a biarch
compiler that defaults to x86-64, merely by specifying ARCH=i386.

As previously discussed, this uses the equivalent logic to the ppc port.

Signed-Off-By: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:07 -07:00
Martin J. Bligh
6f4e1e5061 [PATCH] add page_state info to show_mem
This helps a lot when debugging out of memory stuff - useful especially to
see if all the memory is sucked into slab, etc.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:07 -07:00
Matt Tolentino
bbfceef47f [PATCH] add x86-64 specific support for sparsemem
This patch adds in the necessary support for sparsemem such that x86-64
kernels may use sparsemem as an alternative to discontigmem for NUMA
kernels.  Note that this does no preclude one from continuing to build NUMA
kernels using discontigmem, but merely allows the option to build NUMA
kernels with sparsemem.

Interestingly, the use of sparsemem in lieu of discontigmem in NUMA kernels
results in reduced text size for otherwise equivalent kernels as shown in
the example builds below:

   text	   data	    bss	    dec	    hex	filename
2371036	 765884	1237108	4374028	 42be0c	vmlinux.discontig
2366549	 776484	1302772	4445805	 43d66d	vmlinux.sparse

Signed-off-by: Matt Tolentino <matthew.e.tolentino@intel.com>
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:07 -07:00
Matt Tolentino
2b97690f4c [PATCH] reorganize x86-64 NUMA and DISCONTIGMEM config options
In order to use the alternative sparsemem implmentation for NUMA kernels,
we need to reorganize the config options.  This patch effectively abstracts
out the CONFIG_DISCONTIGMEM options to CONFIG_NUMA in most cases.  Thus,
the discontigmem implementation may be employed as always, but the
sparsemem implementation may be used alternatively.

Signed-off-by: Matt Tolentino <matthew.e.tolentino@intel.com>
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:06 -07:00
Matt Tolentino
1035faf1b1 [PATCH] add x86-64 Kconfig options for sparsemem
Add the requisite arch specific Kconfig options to enable the use of the
sparsemem implementation for NUMA kernels on x86-64.

Signed-off-by: Matt Tolentino <matthew.e.tolentino@intel.com>
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:06 -07:00
Matt Tolentino
073326634b [PATCH] remove direct ref to contig_page_data for x86-64
This patch pulls out all remaining direct references to contig_page_data
from arch/x86-64, thus saving an ifdef in one case.

Signed-off-by: Matt Tolentino <matthew.e.tolentino@intel.com>
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:06 -07:00
Andy Whitcroft
145e664231 [PATCH] ppc64: sparsemem memory model
Provide the architecture specific implementation for SPARSEMEM for PPC64
systems.

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Mike Kravetz <kravetz@us.ibm.com> (in part)
Signed-off-by: Martin Bligh <mbligh@aracnet.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:06 -07:00
Andy Whitcroft
74b30be2e1 [PATCH] ppc64: add memory present
Provide hooks for PPC64 to allow memory models to be informed of installed
memory areas.  This allows SPARSEMEM to instantiate mem_map for the populated
areas.

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Martin Bligh <mbligh@aracnet.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:05 -07:00
Andy Whitcroft
510f8fa7ba [PATCH] ppc64: add early_pfn_to_nid
Provide an implementation of early_pfn_to_nid for PPC64.  This is used by
memory models to determine the node from which to take allocations before the
memory allocators are fully initialised.

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Martin Bligh <mbligh@aracnet.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:05 -07:00
Andy Whitcroft
29751f6991 [PATCH] sparsemem hotplug base
Make sparse's initalization be accessible at runtime.  This allows sparse
mappings to be created after boot in a hotplug situation.

This patch is separated from the previous one just to give an indication how
much of the sparse infrastructure is *just* for hotplug memory.

The section_mem_map doesn't really store a pointer.  It stores something that
is convenient to do some math against to get a pointer.  It isn't valid to
just do *section_mem_map, so I don't think it should be stored as a pointer.

There are a couple of things I'd like to store about a section.  First of all,
the fact that it is !NULL does not mean that it is present.  There could be
such a combination where section_mem_map *is* NULL, but the math gets you
properly to a real mem_map.  So, I don't think that check is safe.

Since we're storing 32-bit-aligned structures, we have a few bits in the
bottom of the pointer to play with.  Use one bit to encode whether there's
really a mem_map there, and the other one to tell whether there's a valid
section there.  We need to distinguish between the two because sometimes
there's a gap between when a section is discovered to be present and when we
can get the mem_map for it.

Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Bob Picco <bob.picco@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:05 -07:00
Andy Whitcroft
641c767389 [PATCH] sparsemem swiss cheese numa layouts
The part of the sparsemem patch which modifies memmap_init_zone() has recently
become a problem.  It changes behavior so that there is a call to
pfn_to_page() for each individual page inside of a node's range:
node_start_pfn through node_end_pfn.  It used to simply do this once, at the
beginning of the node, but having sparsemem's non-contiguous mem_map[]s inside
of a node made it necessary to change.

Mike Kravetz recently wrote a patch which made the NUMA code accept some new
kinds of layouts.  The system's memory was laid out like this, with node 0's
memory in two pieces: one before and one after node 1's memory:

	Node 0: +++++     +++++
	Node 1:      +++++

Previous behavior before Mike's patch was to assign nodes like this:

	Node 0: 00000     XXXXX
	Node 1:      11111

Where the 'X' areas were simply thrown away.  The new behavior was to make the
pg_data_t span node 0 across all of its areas, including areas that are really
node 1's: Node 0: 000000000000000 Node 1: 11111

This wastes a little bit of mem_map space, but ends up being OK, and more
fully utilizes the system's memory.  memmap_init_zone() initializes all of the
"struct page"s for node 0, even for the "hole", but those never get used,
because there is no pfn_to_page() that resolves to those pages.  However, only
calling pfn_to_page() once, memmap_init_zone() always uses the pages that were
allocated for node0->node_mem_map because:

	struct page *start = pfn_to_page(start_pfn);
	// effectively start = &node->node_mem_map[0]
	for (page = start; page < (start + size); page++) {
		init_page_here();...
		page++;
	}

Slow, and wasteful, but generally harmless.

But, modify that to call pfn_to_page() for each loop iteration (like sparsemem
does):

	for (pfn = start_pfn; pfn < < (start_pfn + size); pfn++++) {
		page = pfn_to_page(pfn);
	}

And you end up trying to initialize node 1's pages too early, along with bogus
data from node 0.  This patch checks for those weird layouts and declines to
touch the pages, making the more frequent pfn_to_page() calls OK to do.

Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:05 -07:00
Andy Whitcroft
05b79bdcb4 [PATCH] sparsemem memory model for i386
Provide the architecture specific implementation for SPARSEMEM for i386 SMP
and NUMA systems.

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Martin Bligh <mbligh@aracnet.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:05 -07:00