Commit Graph

154 Commits

Author SHA1 Message Date
Linus Torvalds
1c496784a0 Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (149 commits)
  arm: omap: Add omap3_defconfig
  AM35xx: Defconfig for AM3517 EVM board
  AM35xx: Add support for AM3517 EVM board
  omap: 3630sdp: defconfig creation
  omap: 3630sdp: introduce 3630 sdp board support
  omap3: Add defconfig for IGEP v2 board
  omap3: Add minimal IGEP v2 support
  omap3: Add CompuLab CM-T35 defconfig
  omap3: Add CompuLab CM-T35 board support
  omap3: rx51: Add wl1251 wlan driver support
  omap3: rx51: Add SDRAM init
  omap1: Add default kernel configuration for Herald
  omap1: Add board support and LCD for HTC Herald
  omap: zoom2: update defconfig for LL_DEBUG_NONE
  omap: zoom3: defconfig creation
  omap3: zoom: Introduce zoom3 board support
  omap3: zoom: Drop i2c-1 speed to 2400
  omap3: zoom: rename zoom2 name to generic zoom
  omap3: zoom: split board file for software reuse
  omap3evm: MIgrate to smsc911x ethernet driver
  ...

Fix trivial conflict (two unrelated config options added next to each
other) in arch/arm/mach-omap2/Makefile
2009-12-08 08:15:29 -08:00
Haojian Zhuang
b3a8549593 backlight: da903x_bl: control WLED output current in da9034
Update WLED output current source before changing brightness.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01 09:02:34 +08:00
Mike Rapoport
f64dcac0b1 backlight: tdo24m: ensure chip select changes between transfers
Some SPI host drivers do not change chip select betwen transfers unless
.cs_chnage field is explicitly set. The LCD spec requires chip select
change between consecuitive transfers, so ensure it at the SPI driver
level.

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01 09:02:34 +08:00
Tony Lindgren
a76df42a67 Merge 7xx-iosplit-plat-merge with omap-fixes
Merge branch '7xx-iosplit-plat-merge' into omap-for-linus
2009-11-22 10:08:43 -08:00
Pavel Machek
716bdf1874 backlight: Fix backlight limiting on spitz/corgi devices
On spitz (& similar) machines, if battery is running low, backlight
needs
to be limited to lower step.  Unfortunately, current code uses &= for
limiting, turning backlight off completely for some backlight settings.
Fix that.

Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-11-16 11:50:41 +00:00
Jean Delvare
1e0fa6bd8c backlight: lcd - Fix wrong sizeof
Which is why I have always preferred sizeof(struct foo) over
sizeof(var).

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-11-16 11:50:41 +00:00
Tony Lindgren
ce491cf854 omap: headers: Move remaining headers from include/mach to include/plat
Move the remaining headers under plat-omap/include/mach
to plat-omap/include/plat. Also search and replace the
files using these headers to include using the right path.

This was done with:

#!/bin/bash
mach_dir_old="arch/arm/plat-omap/include/mach"
plat_dir_new="arch/arm/plat-omap/include/plat"
headers=$(cd $mach_dir_old && ls *.h)
omap_dirs="arch/arm/*omap*/ \
drivers/video/omap \
sound/soc/omap"
other_files="drivers/leds/leds-ams-delta.c \
drivers/mfd/menelaus.c \
drivers/mfd/twl4030-core.c \
drivers/mtd/nand/ams-delta.c"

for header in $headers; do
	old="#include <mach\/$header"
	new="#include <plat\/$header"
	for dir in $omap_dirs; do
		find $dir -type f -name \*.[chS] | \
			xargs sed -i "s/$old/$new/"
	done
	find drivers/ -type f -name \*omap*.[chS] | \
		xargs sed -i "s/$old/$new/"
	for file in $other_files; do
		sed -i "s/$old/$new/" $file
	done
done

for header in $(ls $mach_dir_old/*.h); do
	git mv $header $plat_dir_new/
done

Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-20 09:40:47 -07:00
Linus Torvalds
d910fc7860 Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlight
* 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlight:
  backlight: new driver for ADP5520/ADP5501 MFD PMICs
  backlight: extend event support to also support poll()
  backlight/eeepc-laptop: Update the backlight state when we change brightness
  backlight/acpi: Update the backlight state when we change brightness
  backlight: Allow drivers to update the core, and generate events on changes
  backlight: switch to da903x driver to dev_pm_ops
  backlight: Add support for the Avionic Design Xanthos backlight device.
  backlight: spi driver for LMS283GF05 LCD
  backlight: move hp680-bl's probe function to .devinit.text
  backlight: Add support for new Apple machines.
  backlight: mbp_nvidia_bl: add support for MacBookAir 1,1
  backlight: Add WM831x backlight driver

Trivial conflicts due to '#ifdef CONFIG_PM' differences in
drivers/video/backlight/da903x_bl.c
2009-09-26 10:49:42 -07:00
Michael Hennerich
a7998cecf5 backlight: new driver for ADP5520/ADP5501 MFD PMICs
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-09-26 16:48:08 +01:00
Henrique de Moraes Holschuh
89dfc28ccb backlight: extend event support to also support poll()
Extend the backlight event support to also allow the use of
poll()/select() on actual_brightness.

We already have the entire event hookup anyway, adding a single
function call in one line to get functionality like that is a really
good deal.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-09-26 16:48:06 +01:00
Russell King
baea7b946f Merge branch 'origin' into for-linus
Conflicts:
	MAINTAINERS
2009-09-24 21:22:33 +01:00
Anton Vorontsov
e0626e3844 spi: prefix modalias with "spi:"
This makes it consistent with other buses (platform, i2c, vio, ...).  I'm
not sure why we use the prefixes, but there must be a reason.

This was easy enough to do it, and I did it.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Samuel Ortiz <sameo@openedhand.com>
Cc: "John W. Linville" <linville@tuxdriver.com>
Acked-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 07:39:43 -07:00
Matthew Garrett
325253a6b2 backlight: Allow drivers to update the core, and generate events on changes
Certain hardware will send us events when the backlight brightness
changes. Add a function to update the value in the core, and
additionally send a uevent so that userspace can pop up appropriate
UI. The uevents are flagged depending on whether the update originated
in the kernel or from userspace, making it easier to only display UI
at the appropriate time.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-09-21 21:03:58 +01:00
Mike Rapoport
0f7e727380 backlight: switch to da903x driver to dev_pm_ops
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-09-21 20:59:12 +01:00
Russell King
28f9f19db9 Merge branch 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel 2009-09-21 16:02:30 +01:00
Russell King
ddd559b13f Merge branch 'devel-stable' into devel
Conflicts:
	MAINTAINERS
	arch/arm/mm/fault.c
2009-09-12 12:02:26 +01:00
Russell King
cf7a2b4fb6 Merge branches 'arm', 'at91', 'bcmring', 'ep93xx', 'mach-types', 'misc' and 'w90x900' into devel 2009-09-12 12:01:34 +01:00
Mike Rapoport
43ddc00696 [ARM] pxa: update da903x_bl.c to use 'struct dev_pm_ops'
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-10 19:15:35 +08:00
Thierry Reding
3b96ea9ef8 backlight: Add support for the Avionic Design Xanthos backlight device.
This patch adds support for the backlight device found on Avionic Design
Xanthos-based boards.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-09-07 15:14:44 +01:00
Marek Vasut
5036cc41e0 backlight: spi driver for LMS283GF05 LCD
ADd support for the SPI part of LMS283GF05 LCD.  The LCD uses SPI for
initialization and powerdown sequences.  No further defails are specified
in the datasheet about the initialization/powerdown sequence, just the
magic numbers that have to be sent over SPI bus.  This LCD can be found in
the Aeronix Zipit Z2 handheld.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-09-07 15:08:06 +01:00
Uwe Kleine-König
156ff0d473 backlight: move hp680-bl's probe function to .devinit.text
A pointer to hp680bl_probe is passed to the core via
platform_driver_register and so the function must not disappear when the
.init sections are discarded.  Otherwise (if also having HOTPLUG=y)
unbinding and binding a device to the driver via sysfs will result in an
oops as does a device being registered late.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Kristoffer Ericson <Kristoffer.Ericson@gmail.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-09-07 14:41:39 +01:00
Mario Schwalbe
1e9bd9426c backlight: Add support for new Apple machines.
This patch adds support for the new Apple models MacBook 5,1,
MacBook Pro 5,1, MacBook Pro 5,2, MacBook Pro 5,5. It's just a
device table update.

Signed-off-by: Mario Schwalbe <schwalbe@inf.tu-dresden.de>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-09-07 14:34:08 +01:00
Henrik Rydberg
992ea6597e backlight: mbp_nvidia_bl: add support for MacBookAir 1,1
Add LCD backlight support for the Intel GMA965 found in the MacBookAir
1,1.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Acked-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-09-07 14:19:54 +01:00
Mark Brown
a4f3d55cb0 backlight: Add WM831x backlight driver
The WM831x series of PMICs provide DC-DC boost convertors and current
sinks which can be used together to drive LEDs for use as backlights.
Expose this functionality via the backlight API.

Since when used in this configuration the current sink and boost
convertor are very tightly coupled with a multi-stage startup for
the current sink which overlaps with the boost convertor startup
this driver bypasses the regulator API. Machine inititialisation
is responsible for ensuring that the regulators are not accessed
via both APIs.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-09-07 14:05:07 +01:00
Kristoffer Ericson
b317c83321 drivers/video/backlight/jornada720_bl.c: fix build
Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-29 19:10:35 -07:00
Nicolas Ferre
915190f7d4 [ARM] 5614/1: at91: atmel_lcdfb: add at91sam9g10 support to atmel LCD driver
Modify atmel LCD driver: atmel_lcdfb for at91sam9g10.  This add a clock
management equivalent to at91sam9261.

Signed-off-by: Hong Xu <hong.xu@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-23 10:34:20 +01:00
Russell King
4e66a0f536 Merge branch 'fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 2009-07-09 16:07:22 +01:00
Marc Zyngier
82e8b54229 backlight: fix pwm_bl.c to notify platform code when suspending
When suspending, pwm-bl sets duty cycle to 0, and shuts down the pwm
device.

This patch ensure that the platform code is called before that
(through the notify callback_, leaving a chance for the platform code
to configure GPIOs (shutting off the backlight, for example), much like
it is done during normal operations.

Signed-off-by: Marc Zyngier <maz@misterjones.org>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-07-03 14:22:41 +08:00
Aviv Laufer
1d469c6c38 backlight: Fix tdo24m crash on kmalloc
There is  a crash in tdo24m module caused by a call to kmalloc with
the second parameter sizeof(flag) instead of flag.

Signed-off-by: Aviv Laufer <aviv.laufer@gmail.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-06-23 20:32:58 +01:00
Andrea Righi
513adb5868 fbdev: fix info->lock deadlock in fbcon_event_notify()
fb_notifier_call_chain() is called with info->lock held, i.e.  in
do_fb_ioctl() => FBIOPUT_VSCREENINFO => fb_set_var() and the some
notifier callbacks, like fbcon_event_notify(), try to re-acquire
info->lock again.

Remove the lock/unlock_fb_info() in all the framebuffer notifier
callbacks' and be sure to always call fb_notifier_call_chain() with
info->lock held.

Reported-by: Pavel Roskin <proski@gnu.org>
Reported-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-13 15:04:28 -07:00
Kristoffer Ericson
13a7b5dc0d backlight: Adds HP Jornada 700 series backlight driver
Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-04-06 16:06:55 +01:00
Kristoffer Ericson
9e124435c7 backlight: Add HP Jornada 700 series LCD driver
Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-04-06 16:06:55 +01:00
Eric Miao
b8cdd877f2 backlight: fix pwm_bl.c when multiple PWM backlights exist
When multiple PWMs are used as backlights, the current code uses
pdev->name as the backlight name when registering, which will be
conflicting, use dev_name() instead.

Signed-off-by: Peter Edwards <sweetlilmre@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-04-06 16:06:55 +01:00
Mario Schwalbe
1a468ba10c backlight: mbp_nvidia_bl - Add a debug switch
This patch adds a debug switch to enable (little) diagnostic
output, to help to trace down the remaining problems.

Signed-off-by: Mario Schwalbe <schwalbe@inf.tu-dresden.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-04-06 16:06:55 +01:00
Mario Schwalbe
c78a628849 backlight: Add support for MacBook 5, MacBook Air 2, and MacBook Pro 5
This patch adds support for the new Apple models incorporating an Nvidia
chipset.  Apple still uses the same protocol as on older models, but the
registers moved to a different address. To do this, two sets of functions
are added for the Intel/Nvidia chipset models and passed by the DMI_MATCH
function.

The initial code has been contributed by Hu Gang <hugang@soulinfo.com>.

The driver is known to work on MacBook Pro 3, MacBook Pro 4 and MacBook
Pro 5.

Its known to work with limitations on MacBook 5 / MacBook Air 2. Changing
brightness within X doesn't work, if using Nvidia's proprietary graphics
driver with no known fix at present. Changing brightness on a text console
or using the open-source driver does work.

MacBook Pro 5 has a known bug where the initial brightness after bootup is
the last recently used brightness (in Mac OSX), while the firmware reports
maximum. Impossible to fix.

[akpm@linux-foundation.org: build fix]
[rpurdie@linux.intel.com: Rebased the patch against latest git]
Signed-off-by: Mario Schwalbe <schwalbe@inf.tu-dresden.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-04-06 16:06:55 +01:00
Andrea Righi
66c1ca0190 fbmem: fix fb_info->lock and mm->mmap_sem circular locking dependency
Fix a circular locking dependency in the frame buffer console driver
pushing down the mutex fb_info->lock.

Circular locking dependecies occur calling the blocking
fb_notifier_call_chain() with fb_info->lock held.  Notifier callbacks can
try to acquire mm->mmap_sem, while fb_mmap() acquires the locks in the
reverse order mm->mmap_sem => fb_info->lock.

Tested-by: Andrey Borzenkov <arvidjaar@mail.ru>
Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01 08:59:29 -07:00
Mike Rapoport
ce43ae538b drivers/video/backlight: rename da903x to da903x_bl
Currently both da903x backlight and voltage reulator drivers have the
same name. Rename the backlight driver to allow use of both drivers as
modules.

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Acked-by: Eric Miao <eric.miao@marvell.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-05 12:56:48 -08:00
Richard Purdie
d00ba72672 backlight: Rename the corgi backlight driver to generic
The corgi backlight driver is really generic code. This rename makes
this a lot clearer and completes the partial rename made a while ago.

Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-01-08 20:52:37 +00:00
Mike Rapoport
f4f6bda00f backlight: add support for Toppoly TDO35S series to tdo24m lcd driver
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-01-08 20:11:07 +00:00
Richard Purdie
c835ee7f41 backlight: Add suspend/resume support to the backlight core
Add suspend/resume support to the backlight core and enable use of it
by appropriate drivers.

Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-01-08 15:37:43 +00:00
Zhang Rui
9be1df98bc bd->props.brightness doesn't reflect the actual backlight level.
Always invoke backlight_update_status when users want to change
the backlight.

For setups where brightness change is an expensive operation,
this could be done in the driver rather than the core.

http://bugzilla.kernel.org/show_bug.cgi?id=12249

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-01-08 14:11:30 +00:00
Dmitry Baryshkov
0ec561f4b6 backlight: Support VGA/QVGA mode switching in tosa_lcd
LCD driver on tosa requires reprogramming TG after mode
switching. Add support for switching to QVGA mode.

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-01-08 12:37:28 +00:00
Pavel Machek
9a2c61a921 backlight: Catch invalid input in sysfs attributes
Check input properly in backlight, echo > brightness should not turn off
the backlight.

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: fix printk warning]
Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-01-08 12:37:28 +00:00
Denis V. Lunev
866bbdba77 backlight: Value of ILI9320_RGB_IF2 register should not be hardcoded
It is stored in the board specific file
  ./arch/arm/mach-s3c2412/mach-jive.c
as .rgb_if2.

Actually, the value is correct, only semantic is wrong.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-01-08 12:37:28 +00:00
Akinobu Mita
b4a11d3da2 backlight: crbllcd_bl - Use platform_device_register_simple()
Use platform_device_register_simple() and also fix error
handling when platform_device_alloc() fails (cr_backlight_driver
is left registered).

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-01-08 12:37:28 +00:00
Akinobu Mita
6cd6f35a4b backlight: progear_bl - Use platform_device_register_simple()
Use platform_device_register_simple() and also fix error
handling when platform_device_alloc() fails (progearbl_driver
is left registered).

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-01-08 12:37:28 +00:00
Akinobu Mita
3bcdcc0e66 backlight: hp680_bl - Use platform_device_register_simple()
Use platform_device_register_simple() and also fix error
handling when platform_device_alloc() fails (hp680_bl_driver
is left registered).

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-01-08 12:37:28 +00:00
Kay Sievers
64dba9a9a3 video: struct device - replace bus_id with dev_name(), dev_set_name()
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-06 10:44:35 -08:00
Mike Rapoport
f55491a4bc drivers/video/backlight/da903x.c: introduce one more missing kfree
One more error handling code should have kfree as well

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Acked-by: Eric Miao <eric.miao@marvell.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-19 18:50:00 -08:00
Julia Lawall
c0d861afa5 drivers/video/backlight/da903x.c: introduce missing kfree
Error handling code following a kzalloc should free the allocated data.

The semantic match that finds the problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r exists@
local idexpression x;
statement S;
expression E;
identifier f,l;
position p1,p2;
expression *ptr != NULL;
@@

(
if ((x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...)) == NULL) S
|
x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...);
...
if (x == NULL) S
)
<... when != x
     when != if (...) { <+...x...+> }
x->f = E
...>
(
 return \(0\|<+...x...+>\|ptr\);
|
 return@p2 ...;
)

@script:python@
p1 << r.p1;
p2 << r.p2;
@@

print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Cc: Mike Rapoport <mike@compulab.co.il>
Cc: Richard Purdie <rpurdie@linux.intel.com>
Cc: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-19 18:49:59 -08:00