Commit Graph

30 Commits

Author SHA1 Message Date
Ingo Molnar
cdd6c482c9 perf: Do the big rename: Performance Counters -> Performance Events
Bye-bye Performance Counters, welcome Performance Events!

In the past few months the perfcounters subsystem has grown out its
initial role of counting hardware events, and has become (and is
becoming) a much broader generic event enumeration, reporting, logging,
monitoring, analysis facility.

Naming its core object 'perf_counter' and naming the subsystem
'perfcounters' has become more and more of a misnomer. With pending
code like hw-breakpoints support the 'counter' name is less and
less appropriate.

All in one, we've decided to rename the subsystem to 'performance
events' and to propagate this rename through all fields, variables
and API names. (in an ABI compatible fashion)

The word 'event' is also a bit shorter than 'counter' - which makes
it slightly more convenient to write/handle as well.

Thanks goes to Stephane Eranian who first observed this misnomer and
suggested a rename.

User-space tooling and ABI compatibility is not affected - this patch
should be function-invariant. (Also, defconfigs were not touched to
keep the size down.)

This patch has been generated via the following script:

  FILES=$(find * -type f | grep -vE 'oprofile|[^K]config')

  sed -i \
    -e 's/PERF_EVENT_/PERF_RECORD_/g' \
    -e 's/PERF_COUNTER/PERF_EVENT/g' \
    -e 's/perf_counter/perf_event/g' \
    -e 's/nb_counters/nb_events/g' \
    -e 's/swcounter/swevent/g' \
    -e 's/tpcounter_event/tp_event/g' \
    $FILES

  for N in $(find . -name perf_counter.[ch]); do
    M=$(echo $N | sed 's/perf_counter/perf_event/g')
    mv $N $M
  done

  FILES=$(find . -name perf_event.*)

  sed -i \
    -e 's/COUNTER_MASK/REG_MASK/g' \
    -e 's/COUNTER/EVENT/g' \
    -e 's/\<event\>/event_id/g' \
    -e 's/counter/event/g' \
    -e 's/Counter/Event/g' \
    $FILES

... to keep it as correct as possible. This script can also be
used by anyone who has pending perfcounters patches - it converts
a Linux kernel tree over to the new naming. We tried to time this
change to the point in time where the amount of pending patches
is the smallest: the end of the merge window.

Namespace clashes were fixed up in a preparatory patch - and some
stylistic fallout will be fixed up in a subsequent patch.

( NOTE: 'counters' are still the proper terminology when we deal
  with hardware registers - and these sed scripts are a bit
  over-eager in renaming them. I've undone some of that, but
  in case there's something left where 'counter' would be
  better than 'event' we can undo that on an individual basis
  instead of touching an otherwise nicely automated patch. )

Suggested-by: Stephane Eranian <eranian@google.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Paul Mackerras <paulus@samba.org>
Reviewed-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <linux-arch@vger.kernel.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 14:28:04 +02:00
Arnaldo Carvalho de Melo
7ced156bb8 perf top: Show RIP only in verbose mode
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20090826145126.GA5255@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-26 20:21:45 +02:00
Frederic Weisbecker
8f28827a16 perf tools: Librarize trace_event() helper
Librarize trace_event() helper so that perf trace can use it
too. Also clean up the debug.h includes a bit.

It's not good to have it included in perf.h because it doesn't
make it flexible against other headers it may need (headers
that can also depend on perf.h and then create a recursive
header dependency).

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1250453149-664-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-16 23:06:45 +02:00
Ingo Molnar
83a0944fa9 perf: Enable more compiler warnings
Related to a shadowed variable bug fix Valdis Kletnieks noticed
that perf does not get built with -Wshadow, which could have
helped us avoid the bug.

So enable -Wshadow and also enable the following warnings on
perf builds, in addition to the already enabled -Wall -Wextra
-std=gnu99 warnings:

 -Wcast-align
 -Wformat=2
 -Wshadow
 -Winit-self
 -Wpacked
 -Wredundant-decls
 -Wstack-protector
 -Wstrict-aliasing=3
 -Wswitch-default
 -Wswitch-enum
 -Wno-system-headers
 -Wundef
 -Wvolatile-register-var
 -Wwrite-strings
 -Wbad-function-cast
 -Wmissing-declarations
 -Wmissing-prototypes
 -Wnested-externs
 -Wold-style-definition
 -Wstrict-prototypes
 -Wdeclaration-after-statement

And change/fix the perf code to build cleanly under GCC 4.3.2.

The list of warnings enablement is rather arbitrary: it's based
on my (quick) reading of the GCC manpages and trying them on
perf.

I categorized the warnings based on individually enabling them
and looking whether they trigger something in the perf build.
If i liked those warnings (i.e. if they trigger for something
that arguably could be improved) i enabled the warning.

If the warnings seemed to come from language laywers spamming
the build with tons of nuisance warnings i generally kept them
off. Most of the sign conversion related warnings were in
this category. (A second patch enabling some of the sign
warnings might be welcome - sign bugs can be nasty.)

I also kept warnings that seem to make sense from their manpage
description and which produced no actual warnings on our code
base. These warnings might still be turned off if they end up
being a nuisance.

I also left out a few warnings that are not supported in older
compilers.

[ Note that these changes might break the build on older
  compilers i did not test, or on non-x86 architectures that
  produce different warnings, so more testing would be welcome. ]

Reported-by: Valdis.Kletnieks@vt.edu
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-16 10:47:47 +02:00
Frederic Weisbecker
1fe2c1066c perf tools: Factorize the event structure definitions in a single file
Factorize the multiple definition of the events structures into a
single util/event.h file.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Brice Goglin <Brice.Goglin@inria.fr>
2009-08-12 12:04:39 +02:00
Frederic Weisbecker
cd84c2ac6d perf tools: Factorize high level dso helpers
Factorize multiple definitions of high level dso helpers into the
symbol source file.

The side effect is a general export of the verbose and eprintf
debugging helpers into a new file dedicated to debugging purposes.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Brice Goglin <Brice.Goglin@inria.fr>
2009-08-12 12:02:38 +02:00
Mike Galbraith
091bd2e993 perf top: Improve interactive key handling
Pressing any key which is not currently mapped to
functionality, based on startup command line options, displays
currently mapped keys, and prompts for input.

Pressing any unmapped key at the prompt returns the user to
display mode with variables unchanged.  eg, pressing ? <SPACE>
<ESC> etc displays currently available keys, the value of the
variable associated with that key, and prompts.

Pressing same again aborts input.

Signed-off-by: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-09 12:54:31 +02:00
Mike Galbraith
46ab976443 perf_counter tools: Allow perf top top users to switch between weighted and individual counter display
Add [w]eighted hotkey.  Pressing [w] toggles between displaying
weighted total of all counters, and the counter selected via
[E]vent select key.

------------------------------------------------------------------------------
   PerfTop:   90395 irqs/sec  kernel:16.1% [cache-misses/cache-references/instructions],  (all, 4 CPUs)
------------------------------------------------------------------------------

  weight     samples    pcnt         RIP          kernel function
  ______     _______   _____   ________________   _______________

1275408.6      10881 -  5.3% - ffffffff81146f70 : copy_page_c
 553683.4      43569 - 21.3% - ffffffff81146f20 : clear_page_c
  74075.0       6768 -  3.3% - ffffffff81147190 : copy_user_generic_string
  40602.9       7538 -  3.7% - ffffffff81284ba2 : _spin_lock
  26882.1        965 -  0.5% - ffffffff8109d280 : file_ra_state_init

[w]

------------------------------------------------------------------------------
   PerfTop:   91221 irqs/sec  kernel:14.5% [10000Hz cache-misses],  (all, 4 CPUs)
------------------------------------------------------------------------------

  weight     samples    pcnt         RIP          kernel function
  ______     _______   _____   ________________   _______________

            47320.00 - 22.3% - ffffffff81146f20 : clear_page_c
            14261.00 -  6.7% - ffffffff810992f5 : __rmqueue
            11046.00 -  5.2% - ffffffff81146f70 : copy_page_c
             7842.00 -  3.7% - ffffffff81284ba2 : _spin_lock
             7234.00 -  3.4% - ffffffff810aa1d6 : unmap_vmas

Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-09 12:54:30 +02:00
Mike Galbraith
923c42c199 perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form
perf top used to have annotation support, but it has bitrotted and
removed.

This patch restores that: it allows the user to select any symbol
in kernel space for source level annotation on the fly, switch
between event counters and alter display variables. When symbol
details are being displayed, stopping annotation reverts to normal.

known keys:
        [d]     select display delay.
        [e]     select display entries (lines).
        [E]     select annotation event counter.
        [f]     select normal display count filter.
        [F]     select annotation display count filter (percentage).
        [qQ]    quit.
        [s]     select annotation symbol and start annotation.
        [S]     stop annotation, revert to normal display.
        [z]     toggle event count zeroing.

Sample:
------------------------------------------------------------------------------
   PerfTop:   16719 irqs/sec  kernel:78.7% [cache-misses/cache-references/instructions/cycles],  (all, 4 CPUs)
------------------------------------------------------------------------------

Showing cache-misses for e1000_clean_rx_irq
  Events  Pcnt (>=3%)
       0  0.0%                  /* adjust length to remove Ethernet CRC */
       0  0.0%                  if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
       0  0.0%                          length -= 4;
     436  5.0%      f039:       41 f6 84 24 5c 29 00    testb  $0x1,0x295c(%r12)
       0  0.0%      f089:       8b 4d 84                mov    -0x7c(%rbp),%ecx
       0  0.0%      f08c:       48 83 ef 02             sub    $0x2,%rdi
       0  0.0%      f090:       48 83 ee 02             sub    $0x2,%rsi
     811  9.3%      f094:       f3 a4                   rep movsb %ds:(%rsi),%es:(%rdi)
       0  0.0%
       0  0.0%          while (rx_desc->status & E1000_RXD_STAT_DD) {
       0  0.0%      f114:       41 f6 47 0c 01          testb  $0x1,0xc(%r15)
    7226 82.6%      f119:       0f 85 24 fe ff ff       jne    ef43 <e1000_clean_rx_irq+0x84>

Available events:
        0 cache-misses
        1 cache-references
        2 instructions
        3 cycles
Enter details event counter: 2
------------------------------------------------------------------------------
   PerfTop:   15035 irqs/sec  kernel:79.0% [cache-misses/cache-references/instructions/cycles],  (all, 4 CPUs)
------------------------------------------------------------------------------

Showing instructions for e1000_clean_rx_irq
  Events  Pcnt (>=3%)
       0  0.0%                                 int *work_done, int work_to_do)
       0  0.0%  {
     175  0.9%      eebf:       55                      push   %rbp
    1898  9.8%      eec0:       48 89 e5                mov    %rsp,%rbp
       0  0.0%
       0  0.0%          i = rx_ring->next_to_clean;
     140  0.7%      ef0a:       0f b7 41 1a             movzwl 0x1a(%rcx),%eax
     670  3.4%      ef0e:       89 45 ac                mov    %eax,-0x54(%rbp)
       0  0.0%  {
       0  0.0%          memcpy(skb->data + offset, from, len);
      91  0.5%      f07b:       49 8b b6 e8 00 00 00    mov    0xe8(%r14),%rsi
    1153  5.9%      f082:       48 8b b8 e8 00 00 00    mov    0xe8(%rax),%rdi
      42  0.2%      f089:       8b 4d 84                mov    -0x7c(%rbp),%ecx
      14  0.1%      f08c:       48 83 ef 02             sub    $0x2,%rdi
       0  0.0%      f090:       48 83 ee 02             sub    $0x2,%rsi
    1618  8.3%      f094:       f3 a4                   rep movsb %ds:(%rsi),%es:(%rdi)
       0  0.0%
       0  0.0%                  /* return some buffers to hardware, one at a time is too slow */
       0  0.0%                  if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
     867  4.5%      f0e7:       83 7d b0 0f             cmpl   $0xf,-0x50(%rbp)
       0  0.0%
       0  0.0%          while (rx_desc->status & E1000_RXD_STAT_DD) {
      37  0.2%      f114:       41 f6 47 0c 01          testb  $0x1,0xc(%r15)
    4047 20.8%      f119:       0f 85 24 fe ff ff       jne    ef43 <e1000_clean_rx_irq+0x84>

Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-09 12:54:29 +02:00
Arnaldo Carvalho de Melo
59b9005692 perf top: Add mwait_idle_with_hints to skip_symbols[]
We skip the display of idle routine related symbols because
they are typically rather erratic and confusing: they depend
on the IRQ rate or sometimes they dominate the profile if
they are polling based.

Add mwait_idle_with_hints too, this is one of the idle
routines on x86.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-02 13:58:16 +02:00
Mike Galbraith
0fdc7e67dd perf_counter tools: Give perf top inherit option
Currently, perf top -p only tracks the pid provided, which isn't very useful
for watching forky loads, so give it an inherit option.

Signed-off-by: Mike Galbraith <efault@gmx.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1248165036.9795.10.camel@marge.simson.net>
2009-07-22 18:05:58 +02:00
Frederic Weisbecker
1e11fd82d2 perf_counter tools: Provide helper to print percents color
Among perf annotate, perf report and perf top, we can find the
common colored printing of percents according to the following
rules:

    High overhead =  > 5%, colored in red
    Mid overhead =  > 0.5%, colored in green
    Low overhead =  < 0.5%, default color

Factorize these multiple checks in a single function named
percent_color_fprintf() and also provide a get_percent_color()
for sites which print percentages and other things at the same
time.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1246558475-10624-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-02 21:38:37 +02:00
Mike Galbraith
429764873c perf_counter tools: Enable kernel module symbol loading in tools
Add the -m/--modules option to perf report and perf annotate,
which enables live module symbol/image loading. To be used
with -k/--vmlinux.

(Also give perf annotate a -P/--full-paths option.)

Signed-off-by: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1246514986.13293.48.camel@marge.simson.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-02 08:42:21 +02:00
Mike Galbraith
6cfcc53ed4 perf_counter tools: Connect module support infrastructure to symbol loading infrastructure
Signed-off-by: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1246514916.13293.46.camel@marge.simson.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-02 08:42:21 +02:00
Mike Galbraith
9974f49678 perf_counter tools: Make symbol loading consistently return number of loaded symbols
perf_counter tools: Make symbol loading consistently return number of loaded symbols.

Signed-off-by: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1246514758.13293.42.camel@marge.simson.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-02 08:42:20 +02:00
Arnaldo Carvalho de Melo
43cbcd8acb perf_counter tools: Share rbtree.with the kernel
The tools/perf/util/rbtree.c copy already drifted by three
csets:

 4b324126e0
 4c60117811
 16c047add3

So remove the copy and use the lib/rbtree.c directly, sharing
the source code while still generating a separate object file,
since tools/perf uses a far more agressive -O6 switch.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20090701152837.GG15682@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-01 22:37:22 +02:00
Ingo Molnar
f37a291c52 perf_counter tools: Add more warnings and fix/annotate them
Enable -Wextra. This found a few real bugs plus a number
of signed/unsigned type mismatches/uncleanlinesses. It
also required a few annotations

All things considered it was still worth it so lets try with
this enabled for now.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-01 12:49:48 +02:00
Anton Blanchard
3a3393ef75 perf top: Add ppc64 specific skip symbols and strip ppc64 . prefix
Filter out some ppc64 specific idle loop functions and remove
leading '.' on ppc64 text symbols.

Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: a.p.zijlstra@chello.nl
Cc: paulus@samba.org
LKML-Reference: <20090630230140.995643441@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-01 01:25:19 +02:00
Anton Blanchard
2ab52083ff perf top: Move skip symbols to an array
Move the list of symbols we skip into an array, making it
easier to add new ones.

Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: a.p.zijlstra@chello.nl
Cc: paulus@samba.org
LKML-Reference: <20090630230140.904782938@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-01 01:25:19 +02:00
Anton Blanchard
1f208ea678 perf report: Fix -z option
Fix a copy and paste error, -z was setting the group option.

Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: a.p.zijlstra@chello.nl
Cc: paulus@samba.org
LKML-Reference: <20090630230140.714204656@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-01 01:25:18 +02:00
Peter Zijlstra
e6e18ec79b perf_counter: Rework the sample ABI
The PERF_EVENT_READ implementation made me realize we don't
actually need the sample_type int the output sample, since
we already have that in the perf_counter_attr information.

Therefore, remove the PERF_EVENT_MISC_OVERFLOW bit and the
event->type overloading, and imply put counter overflow
samples in a PERF_EVENT_SAMPLE type.

This also fixes the issue that event->type was only 32-bit
and sample_type had 64 usable bits.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-25 21:39:08 +02:00
Paul Mackerras
9cffa8d533 perf_counter tools: Define and use our own u64, s64 etc. definitions
On 64-bit powerpc, __u64 is defined to be unsigned long rather than
unsigned long long.  This causes compiler warnings every time we
print a __u64 value with %Lx.

Rather than changing __u64, we define our own u64 to be unsigned long
long on all architectures, and similarly s64 as signed long long.
For consistency we also define u32, s32, u16, s16, u8 and s8.  These
definitions are put in a new header, types.h, because these definitions
are needed in util/string.h and util/symbol.h.

The main change here is the mechanical change of __[us]{64,32,16,8}
to remove the "__".  The other changes are:

* Create types.h
* Include types.h in perf.h, util/string.h and util/symbol.h
* Add types.h to the LIB_H definition in Makefile
* Added (u64) casts in process_overflow_event() and print_sym_table()
  to kill two remaining warnings.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: benh@kernel.crashing.org
LKML-Reference: <19003.33494.495844.956580@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-19 18:25:47 +02:00
Peter Zijlstra
f4dbfa8f31 perf_counter: Standardize event names
Pure renames only, to PERF_COUNT_HW_* and PERF_COUNT_SW_*.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-11 17:54:15 +02:00
Ingo Molnar
729ff5e2aa perf_counter tools: Clean up u64 usage
A build error slipped in:

 builtin-report.c: In function ‘hist_entry__fprintf’:
 builtin-report.c:711: error: format ‘%12d’ expects type ‘int’, but argument 3 has type ‘uint64_t’

Because we got a bit sloppy with those types. uint64_t really sucks,
because there's no printf format for it. So standardize on __u64
instead - for all types that go to or come from the ABI (which is __u64),
or for values that need to be large enough even on 32-bit.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-11 16:48:38 +02:00
Ingo Molnar
aefcf37b82 perf_counter tools: Standardize color printing
The rule is:

 - high overhead: red
 -  mid overhead: green
 -  low overhead: normal (white/black)

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-08 23:15:28 +02:00
Ingo Molnar
30c806a094 perf_counter tools: Handle kernels with !CONFIG_PERF_COUNTER
If perf is run on a !CONFIG_PERF_COUNTER kernel right now it
bails out with no messages or with confusing messages.

Standardize this case some more and explain the situation.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-07 17:46:24 +02:00
Ingo Molnar
3da297a60f perf record: Fall back to cpu-clock-ticks if no PMU
On architectures/CPUs without PMU support but with perfcounters
enabled 'perf record' currently fails because it cannot create a
cycle based hw-perfcounter.

Fall back to the cpu-clock-tick sw-perfcounter in this case, which
is hrtimer based and will always work (as long as perfcounters
are enabled).

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-07 17:39:02 +02:00
Ingo Molnar
716c69feca perf top: Fall back to cpu-clock-tick hrtimer sampling if no cycle counter available
On architectures/CPUs without PMU support but with perfcounters
enabled 'perf top' currently fails because it cannot create a
cycle based hw-perfcounter.

Fall back to the cpu-clock-tick sw-perfcounter in this case, which
is hrtimer based and will always work (as long as perfcounters
is enabled).

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-07 17:31:52 +02:00
Frederic Weisbecker
2f01190aa6 perf top: Wait for a minimal set of events before reading first snapshot
The first snapshot reading often occur before any events have
been read in the mapped perfcounter files.

Just wait until we have at least one event before starting the
snapshot, or the delay before the first set of entries to be
displayed may be long in case of low refresh rate.

Note: we could also use a semaphore to wait before
"print_entries" number of eveents is reached, but again this
value is tunable and we can't ensure we will even reach it.
Also we could base on a default mimimum set of entries for the
first refresh, say 15, but again, the minimal sample is
tunable, and we could end up displaying nothing until we have a
minimal default set of events, which can take some time in case
of high samples filters.

Hence this simple solution which partially covers the default
case.

[ Impact: fix display artifacts in perf top ]

Signed-off-by: Frederic Weisbecker <fweisbeec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1244322643-6447-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-07 09:32:44 +02:00
Ingo Molnar
864709302a perf_counter tools: Move from Documentation/perf_counter/ to tools/perf/
Several people have suggested that 'perf' has become a full-fledged
tool that should be moved out of Documentation/. Move it to the
(new) tools/ directory.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-06 20:33:43 +02:00