Commit Graph

899 Commits

Author SHA1 Message Date
Linus Torvalds
279b1e0fd9 Merge branch 'for-linus' of git://github.com/dtor/input
* 'for-linus' of git://github.com/dtor/input:
  Input: wacom - fix touch parsing on newer Bamboos
  Input: bcm5974 - add MacBookAir4,1 trackpad support
  Input: wacom - add POINTER and DIRECT device properties
  Input: adp5588-keys - remove incorrect modalias
  Input: cm109 - fix checking return value of usb_control_msg
  Input: wacom - advertise BTN_TOOL_PEN and BTN_STYLUS for PenPartner
  Input: wacom - remove pressure for touch devices
2011-09-16 14:09:19 -07:00
Jason Gerecke
3512069eef Input: wacom - add POINTER and DIRECT device properties
Adds INPUT_PROP_POINTER or INPUT_PROP_DIRECT as necessary to the
hardware supported by the Wacom driver. The DIRECT property is
assigned to devices with an embedded screen (i.e. touchscreens
and display tablets). The POINTER property is assigned to those
without embedded screens.

Signed-off-by: Jason Gerecke <killertofu@gmail.com>
Reviewed-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-08 09:42:28 -07:00
Jiri Kosina
882aba0105 Merge branches 'upstream-fixes' and 'magicmouse' into for-linus 2011-09-07 13:53:17 +02:00
David Herrmann
9086617ea3 HID: wacom: Unregister sysfs attributes on remove
HID devices can be hotplugged so we should unregister all sysfs attributes when
removing a driver. Otherwise, manually unloading the wacom-driver will not
remove the sysfs attributes. Only when the device is disconnected, they are
removed, eventually.

Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-09-07 13:32:35 +02:00
David Herrmann
dde58cfcc3 HID: wacom: Fix error path of power-supply initialization
power_supply_unregister() must not be called if power_supply_register() failed.
The wdata->psy.dev pointer may point to invalid memory after a failed
power_supply_register() and hence wacom_remove() will fail while calling
power_supply_unregister().

This changes the wacom_probe function to fail if it cannot register the
power_supply devices. If we would want to keep the previous behaviour we had to
keep some flag about the power_supply state and check it on wacom_remove, but
this seems inappropriate here. Hence, we simply fail, too, if
power_supply_register fails.

Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-09-07 13:32:34 +02:00
Clemens Werther
6d1db07779 HID: add support for HuiJia USB Gamepad connector
Create each gamepad as a separate joystick

Signed-off-by: Clemens Werther <clemens.werther@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-08-25 15:35:14 +02:00
Jiri Kosina
35d851df23 HID: magicmouse: ignore 'ivalid report id' while switching modes, v2
This is basically a more generic respin of 23746a6 ("HID: magicmouse: ignore
'ivalid report id' while switching modes") which got reverted later by
c3a492.

It turns out that on some configurations, this is actually still the case
and we are not able to detect in runtime.

The device reponds with 'invalid report id' when feature report switching it
into multitouch mode is sent to it.

This has been silently ignored before 0825411ade ("HID: bt: Wait for ACK
on Sent Reports"), but since this commit, it propagates -EIO from the _raw
callback .

So let the driver ignore -EIO as response to 0xd7,0x01 report, as that's
how the device reacts in normal mode.

Sad, but following reality.

This fixes https://bugzilla.kernel.org/show_bug.cgi?id=35022

Reported-by: Chase Douglas <chase.douglas@canonical.com>
Reported-by: Jaikumar Ganesh <jaikumarg@android.com>
Tested-by: Chase Douglas <chase.douglas@canonical.com>
Tested-by: Jaikumar Ganesh <jaikumarg@android.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-08-25 14:21:37 +02:00
Jiri Kosina
d446014162 Merge branches 'wiimote' and 'upstream-fixes' into for-linus 2011-08-24 16:41:52 +02:00
David Herrmann
c87019e41d HID: wiimote: Add status and return request handlers
The wiimote resets the current drm when an extension is plugged in.
Fortunately, it also sends a status report in this situation so we just
reset the drm on every status report to keep the drm consistent.

Also handle return reports from the wiimote which indicate success and
failure of requests that we've sent.

Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-08-23 10:55:45 +02:00
David Herrmann
2cb5e4bc53 HID: wiimote: Add drm request
The wiimote reports data in several data reporting modes (DRM). The DRM
request makes the wiimote send data in the requested drm.

The DRM mode can be set explicitely or can be chosen by the driver. To let
the driver choose the DRM mode, pass WIIPROTO_REQ_NULL placeholder to it. This
is no valid request and is replaced with an appropriate DRM.

Currently, the driver always sets the basic DRM_K mode, but this will be
extended when further peripherals like accelerometer and IR are supported.

Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-08-23 10:55:34 +02:00
David Herrmann
23a5a4a39e HID: wiimote: Register led class devices
This registers 4 led devices to allow controlling the wiimote leds via standard
LED sysfs API. It removes the four sysfs attributes so we don't have two APIs
for one device.

Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-08-23 10:55:21 +02:00
David Herrmann
26af17484a HID: wiimote: Correctly call HID open/close callbacks
Even though the bluetooth hid backend does not react on open/close callbacks, we
should call them to be consistent with other hid drivers.

Also the new input open/close handlers will be used in future to prepare the
wiimote device for IR/extension input.

Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-08-23 10:55:11 +02:00
David Herrmann
3989ef6cfb HID: wiimote: Simplify synchronization
The new locking scheme in HID core allows us to remove a bit of synchronization.
Since the HID layer acts synchronously we simply register input core last and
there are no synchonization issues anymore.
Also register sysfs files after that to simplify the code.

Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-08-23 10:54:59 +02:00
Jeremiah Matthey
f5e4282586 HID: usbhid: Add support for SiGma Micro chip
Patch to add SiGma Micro-based keyboards (1c4f:0002) to hid-quirks.

These keyboards dont seem to allow the records to be initialized, and hence a
timeout occurs when the usbhid driver attempts to initialize them. The patch
just adds the signature for these keyboards to the hid-quirks list with the
setting HID_QUIRK_NO_INIT_REPORTS. This removes the 5-10 second wait for the
timeout to occur.

Signed-off-by: Jeremiah Matthey <sprg86@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-08-23 09:44:30 +02:00
Chase Douglas
4f6fdf0868 HID: magicmouse: Set resolution of touch surfaces
Add touch surface resolution information. The size of the touch surfaces
has been determined to the hundredth of a mm.

Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Michael Poole <mdpoole@troilus.org>
Cc: linux-input@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
[jkosina@suse.cz: update comments and commit message]
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-08-10 14:08:46 +02:00
Dan Bastone
4a4c879904 HID: add support for new revision of Apple aluminum keyboard
Add USB device ids for the new revision (MB110LL/B) of Apple's wired aluminum
keyboard.  I have only confirmed that the ANSI version is correct - it is
assumed that the ISO and JIS versions follow the standard numbering convention.

Signed-off-by: Dan Bastone <dan@pwienterprises.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-08-01 23:18:26 +02:00
Jiri Kosina
a91f423e59 Merge branches 'roccat', 'upstream' and 'wiimote' into for-linus 2011-07-22 22:47:08 +02:00
Jiri Kosina
b580169aff HID: fix support for Microsoft comfort mouse 4500
Add forgotten entry into the global blacklist.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-22 12:11:15 +02:00
ice chien
bc8a2a9b4e HID: hid-multitouch: add one new multitouch device's VID/PID
This patch adds support for the CSR panel built by XAT.

Signed-off-by: Ice Chien <ice.chien@accupoint.com.tw>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-21 14:12:28 +02:00
Axel Lin
d6b8f5819f HID: prodikeys: remove a redundant forward declaration of struct pcmidi_snd
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-21 13:59:08 +02:00
Axel Lin
f4c79818ac HID: prodikeys: make needlessly global symbols static
The following symbols are not referenced outside this file so
there's no need for it to be in the global name space.

  pcmidi_sustained_note_release
  init_sustain_timers
  stop_sustain_timers
  pcmidi_handle_report
  pcmidi_setup_extra_keys
  pcmidi_snd_initialise
  pcmidi_snd_terminate

Make them static.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-21 13:58:53 +02:00
Axel Lin
2dcd9543a2 HID: emsff: properly handle emsff_init failure
emsff_init() may fail, let's properly handle the failure.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-20 11:55:18 +02:00
Axel Lin
b30d89d105 HID: ACRUX - add missing hid_hw_stop() in ax_probe() error path
hid_hw_stop() must be called in ax_probe() error path if hid_hw_start()
was successful.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-14 11:42:53 +02:00
Ari Savolainen
23c10becdb HID: fix horizontal wheel for ms comfort mouse 4500
Microsoft comfort mouse 4500 report descriptor contains duplicate
usages for horizontal wheel. This patch fixes the wrong mapping
caused by that.

Signed-off-by: Ari Savolainen <ari.m.savolainen@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-12 10:31:56 +02:00
Nikolai Kondrashov
6be914f11d HID: uclogic: Add support for UC-Logic WP1062
Add support for UC-Logic Tablet WP1062 by fixing its report descriptor.

This tablet is sold as Monoprice 10X6.25 Inches Graphic Drawing Tablet.

Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11 14:37:24 +02:00
David Herrmann
3c1c2fce64 HID: wiimote: Add sysfs support to wiimote driver
Add sysfs files for each led of the wiimote. Writing 1 to the file
enables the led and 0 disables the led.

We do not need memory barriers when checking wdata->ready since we use
a spinlock directly after it.

Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11 14:30:24 +02:00
David Herrmann
32a0d9a522 HID: wiimote: Cache wiimote led state
Save the current state of the leds in the wiimote data structure. This
allows us to discard new led requests that wouldn't change anything.
Protect the whole state structure by a spinlock. Every wiiproto_*
function expects this spinlock to be held when called.

Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11 14:30:24 +02:00
David Herrmann
db3083467f HID: wiimote: Add wiimote led request
Add new request that sets the leds on the target device. Also, per
default, set led1 after initializing a device.

Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11 14:30:23 +02:00
David Herrmann
1abb9ad389 HID: wiimote: Add wiimote input button parser
Parse input report 0x30 from the wiimote as button input. We need to
send events for all buttons on every input report because the wiimote
does not send events for single buttons but always for all buttons
to us. The input layer, however, filters redundant events.

Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11 14:30:23 +02:00
David Herrmann
a4d1919762 HID: wiimote: Add wiimote event handler
Create array of all event handlers and call each handler when we
receive the related event.

Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11 14:30:23 +02:00
David Herrmann
23c063cb02 HID: wiimote: Add output queue for wiimote driver
The raw hid output function that is supported by bluetooth low-level
hid driver does not provide an output queue and also may sleep. The
wiimote driver, though, may need to send data in atomic context so
this patch adds a buffered output queue for the wiimote driver.

We use the shared workqueue to send our buffer to the hid device.
There is always only one active worker which flushes the whole output
queue to the device. If our queue is full, every further
output is discarded.

Special care is needed in the deinitialization routine. When
wiimote_hid_remove is called, HID input is already disabled, but HID
output may still be used from our worker and is then discarded by the
lower HID layers. Therefore, we can safely disable the input layer since it
is the only layer that still sends input events.
Future sysfs attributes must be freed before unregistering input to
avoid the sysfs handlers to send input events to a non-existing input
layer.

Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11 14:30:23 +02:00
David Herrmann
0c218f1448 HID: wiimote: Add wiimote send function
The wiimote driver needs to send raw output reports to the wiimote
device. Otherwise we could not manage the peripherals of the wiimote
or perform memory operations on the wiimote.
We cannot use hidinput_input_event of the lowlevel hid driver, since
this does not accept raw input. Therefore, we need to use the same
function that hidraw uses to send output. Side effect is, the raw
output function is not buffered and can sleep.

Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11 14:30:23 +02:00
David Herrmann
4d36e9754f HID: wiimote: Synchronize wiimote input and hid event handling
The wiimote first starts HID hardware and then registers the input
device. We need to synchronize the startup so no event handler will
start parsing events when the wiimote device is not ready, yet.

Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11 14:30:22 +02:00
David Herrmann
672bc4e090 HID: wiimote: Register input device in wiimote hid driver
Register input device so the wiimote can report input events on
it. We do not use HIDINPUT because the wiimote does not provide any
descriptor table which might be used by HIDINPUT. So we avoid
having HIDINPUT parse the wiimote descriptor and create unrelated
or unknown event flags. Instead we register our own input device
that we have full control of.

Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11 14:30:22 +02:00
David Herrmann
e894d0e3e0 HID: wiimote: Add wiimote device structure
Allocate wiimote device structure with all wiimote related data
when registering new wiimote devices.

Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11 14:30:22 +02:00
David Herrmann
02fb72a06a HID: wiimote: Register wiimote hid driver stub
The wiimote uses a fake HID protocol. Hence, we need to prevent
HIDINPUT and HIDDEV from parsing wiimote data and instead parse
raw hid events.
Add VID/PID to hid-core so the special driver is loaded on new
wiimotes.

Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11 14:30:22 +02:00
David Herrmann
fb51b44385 HID: wiimote: Add Nintendo Wii Remote driver stub
Add stub driver for the Nintendo Wii Remote. The wii remote uses
the HID protocol to communicate with the host over bluetooth. Hence,
add dependency for HIDP and place driver in hid subsystem.

Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11 14:30:21 +02:00
Anssi Hannula
d946e65e2a HID: add FF support for Holtek On Line Grip based gamepads
Add force feedback support for Holtek On Line Grip based HID devices.

The protocol is more complex than that of most other rumblepads, but the
device still needs to be handled as a memoryless one.

Tested by Cleber de Mattos Casali with a 1241:5015 "Clone Joypad Super
Power Fire" gamepad, with help from Hendrik Iben <hendrik_iben@web.de>.

Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Tested-by: Cleber de Mattos Casali <clebercasali@yahoo.com.br>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-27 12:40:00 +02:00
Benjamin Tissoires
c3ead6de4f HID: hid-multitouch: add support for a new Lumio dual-touch panel
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-24 13:41:11 +02:00
Benjamin Tissoires
85a600825b HID: hid-multitouch: correct VID for Stantum panels
while merging hid-stantum into hid-multitouch, I did not correctly copy/paste
the VIDs for those devices.  This patch fixes it.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-24 13:40:51 +02:00
Benjamin Tissoires
50bc03ab5c HID: hid-multitouch: ensure slots are initialized
In case a device does not provide the feature "Maximum Contact Count",
or set it at 0, the maxcontacts field may be at 0 while calling
input_mt_init_slots.

This patch ensures that hid-multitouch will allways report
ABS_MT_SLOT and ABS_MT_TRACKING_ID to the user space.

This corrects a bug found with some Ilitek devices that has been
integrated in 3.0-rc0.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-24 13:39:51 +02:00
Jiri Kosina
c3a4924565 Revert "HID: magicmouse: ignore 'ivalid report id' while switching modes"
This reverts commit 23746a66d7.

It turned out that the actual reason for failure is not the device
firmware, but bug in Bluetooth stack, which will be fixed by
patch by Ville Tervo which corrects the mask handling for CSR 1.1
Dongles.

Reported-and-tested-by: Ed Tomlinson <edt@aei.ca>
Reported-and-tested-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-16 12:21:34 +02:00
Jiri Kosina
f3b83d71a1 HID: add support for MS Digital Media 3000
The Digital Media 3000 keyboard (USB id: 0x0730) features the same 1-5
Application Launch keys that the Natural Ergonomic 4000 has. Add its
usb id to the list of quirks.

Reported-by: Khelben Blackstaff <eye.of.the.8eholder@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-14 10:46:51 +02:00
Simon Wood
c9e4d87758 HID: hid-sony: fix endiannes of Sixaxis accel/gyro values
The accelerometers/gyro on the Sixaxis are reported in the wrong
endianness (ie. not compatible with HID), so this patch intercepts
the report and swaps the appropriate bytes over.

Accelerometers are scaled with a nominal value of +/-4000 = 1G,
maximum value would be around +/-32768 = 8G.

Gyro on my device always reports -32768, might need some calibration
set within the controller.

Fix extracted from previous patch submission:
https://patchwork.kernel.org/patch/95212/

Signed-off-by: Marcin Tolysz <tolysz@gmail.com>
Signed-off-by: Simon Wood <simon@mungewell.org>
Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-13 13:21:30 +02:00
Simon Wood
61ab44bebd HID: hid-sony: amend Sixaxis descriptor to enable accelerometers
Modify the HID descriptor of the Sixaxis controller to allow the
reporting of the accelerometers and gyro via a joystick axis.

Rewrite section from offset 83:
--
0x75, 0x08,         /* Report Size (8),         */
/* all the other data lumped together */
0x95, 0x27,         /* Report Count (39),       */
0x09, 0x01,         /* Usage (Pointer),         */
0x81, 0x02,         /* Input (Variable),        */
0x75, 0x08,         /* Report Size (8),         */
0x95, 0x30,         /* Report Count (48),       */
0x09, 0x01,         /* Usage (Pointer),         */
/* Note Output */
0x91, 0x02,         /* Output (Variable),       */
0x75, 0x08,         /* Report Size (8),         */
0x95, 0x30,         /* Report Count (48),       */
0x09, 0x01,         /* Usage (Pointer),         */
/* Note Feature */
0xB1, 0x02,         /* Feature (Variable),      */
--
with
--
/* last 2 not used... */
0x95, 0x13,         /* Report Count (19),       */
0x09, 0x01,         /* Usage (Pointer),         */
0x81, 0x02,         /* Input (Variable),        */
/* Padding */
0x95, 0x0C,         /* Report Count (12),       */
0x81, 0x01,         /* Input (Constant),        */
0x75, 0x10,         /* Report Size (16),        */
0x95, 0x04,         /* Report Count (4),        */
0x26, 0xFF, 0x03,   /* Logical Maximum (1023),  */
0x46, 0xFF, 0x03,   /* Physical Maximum (1023), */
0x09, 0x01,         /* Usage (Pointer),         */
0x81, 0x02,         /* Input (Variable),        */
--

Signed-off-by: Simon Wood <simon@mungewell.org>
Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-13 13:20:06 +02:00
Stefan Achatz
901e64dbdb HID: roccat: fix NULL pointer dereference, add range checks
On rare occassions raw events can be triggered before drvdata gets set up
which leads to NULL pointer dereferences. This was only observed with pyra on
2.6.39, but is fixed for all devices now to play it save.
kovaplus returned wrong actual values when profile change was initiated from host.
Added range checks for setting actual profile on all devices.

Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-13 13:06:23 +02:00
Stefan Achatz
1edd5b42a6 HID: roccat: correction and cleanup of HID feature reports
Removed analog feature report enums and modified code in roccat_common
to reflect this. Non standard conform Kone got its own copy of the old
code. That helps extracting more generalizations for newer devices.

Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-13 12:52:57 +02:00
Stefan Achatz
303f272c1f HID: roccat: chang Kconfig menu to submenu for roccat devices
As module roccat is needed by all devices, it's the toplevel
menu entry with all devices dependent.

Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-13 12:51:53 +02:00
Stefan Achatz
6d1dec85af HID: roccat: Add "Roccat Talk" support for koneplus
Added binary sysfs attribute to support new functionality the manufacturer
added to koneplus.

Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-13 12:50:40 +02:00
Benjamin Tissoires
b84bd27fe7 HID: hid-multitouch: fix broken eGalax
Since the inclusion of eGalax devices in 2.6.39, I've got some
bug reports for 480d and other devices.
The problem lies in the reports descriptors: eGalax supports both
pen and fingers, and so the reports descriptors contained both.
But hid-multitouch relies on them to detect the last item in each
field to send the multitouch events. In 480d, the last item is not
Y as it should but Pressure. That means that the fields are not
aligned and X,Y are at 0,0 (the other touch coordinates of the report).

With this patch, the detection is made only when the field ContactID
has been detected inside the collection.

There is still a problem with the detections of the range as stylus
and fingers may not have the same min/max, but it's a start.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Reviewed-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-12 23:59:23 +02:00