Commit Graph

513 Commits

Author SHA1 Message Date
Kaz Kojima
fc1d4c9c37 sh: Fix up futex implementation.
SH is able to support a complete futex implementation on UP by way
of gUSA. However, IRQ toggling must be done for the old CPUs that
don't have movli.l/movco.l (LL/SC) instructions. Provide a default
implementation that does this, so it's possible to optimize for
newer CPUs.

Follows the same scheme as the current asm-sh/atomic-*.h headers.

Signed-off-by: Kaz Kojima <kkojima@rr.iij4u.or.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-18 13:58:32 +09:00
Magnus Damm
68abdbbb03 sh: rework ipr code
This patch reworks the ipr code by grouping the offset array together
with the ipr_data structure in a new data structure called ipr_desc.
This new structure also contains the name of the controller in struct
irq_chip. The idea behind putting struct irq_chip in there is that we
can use offsetof() to locate the base addresses in the irq_chip
callbacks. This strategy has much in common with the recently merged
intc2 code.

One logic change has been made - the original ipr code enabled the
interrupts by default but with this patch they are all disabled by
default.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-15 18:56:19 +09:00
Magnus Damm
d619500aed sh: rework intc2 code
The shared intc2 code currently contains cpu-specific #ifdefs.
This is a tad unclean and it prevents us from using the shared code
to drive board-specific irqs on the se7780 board.

This patch reworks the intc2 code by moving the base addresses of
the intc2 registers into struct intc2_desc. This new structure also
contains the name of the controller in struct irq_chip. The idea
behind putting struct irq_chip in there is that we can use offsetof()
to locate the base addresses in the irq_chip callbacks.

One logic change has been made - the original shared intc2 code
enabled the interrupts by default but with this patch they are all
disabled by default.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-15 10:41:54 +09:00
Paul Mundt
357d59469c sh: Tidy up dependencies for SH-2 build.
SH-2 can presently get in to some pretty bogus states, so
we tidy up the dependencies a bit and get it all building
again.

This gets us a bit closer to a functional allyesconfig
and allmodconfig, though there are still a few things to
fix up.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-11 15:32:07 +09:00
Paul Mundt
14bea95b84 sh: Compile fix for SH7604 removal.
There was a last remaining reference to CPU_SH7604 that broke
the build, kill that off too.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-11 10:18:45 +09:00
Robert P. J. Day
711be60522 sh: Warn against direct inclusion of <asm/rwsem.h>.
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08 11:56:31 +09:00
Paul Mundt
b9601c5e59 sh: Kill off dead SH7604 support.
This was added during 2.5.x, but was never moved along. This
can easily be resurrected if someone has one they wish to work
with, but it's not worth keeping around in its current form.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08 11:55:28 +09:00
Paul Mundt
b241cb0c88 sh: Support for multiple nodes.
This adds basic support for multiple nodes on SH machines.
This is primarily useful for boards with many different
memory blocks that are otherwise unused (SH7722/SH7785 URAM
and so forth).

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08 02:43:49 +00:00
Paul Mundt
cbd2d9d8fc sh: Default to 4-byte alignment for SLUB objects.
Slub currently defaults to 8-byte alignment for the kmalloc
and slab minalign values, where 4 will suffice. In the slab
case BYTES_PER_WORD == 4 already, so defining the minalign
values outright doesn't cause any regressions there either.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08 02:43:48 +00:00
Paul Mundt
dfbb904280 sh: sparsemem support.
This implements basic sparsemem support for SH. Presently this only
uses static sparsemem, and we still permit explicit selection of
flatmem. Those boards that want sparsemem can select it as usual.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08 02:43:43 +00:00
Paul Mundt
5900711ad7 sh: pfn_valid() depends on flatmem.
pfn_valid() is already defined in the sparsemem case, so we only
need to define this for CONFIG_FLATMEM.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08 02:43:42 +00:00
Paul Mundt
82f81f4784 sh: Kill off machvec aliases.
We now throw all of the machvecs in to .machvec.init and either
select one on the command line, or copy out the first (and
usually only) one to sh_mv. The rest are freed as usual.

This gets rid of all of the silly sh_mv aliasing and makes the
selection explicit rather than link-order dependent.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08 02:43:39 +00:00
Paul Mundt
25f8151bdc sh: Get multiple boards in one image working again.
This tidies up the build rules and permits multiple boards to be
linked in to the same kernel. The earlier Kconfig work ensures that
the CPU configuration is consistent across the boards, as this is
the only thing that we can't do dynamically.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08 02:43:39 +00:00
Paul Mundt
9655ad03af sh: Fixup machvec support.
This fixes up much of the machvec handling, allowing for it to be
overloaded on boot. Making practical use of this still requires
some Kconfig munging, however.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08 02:43:37 +00:00
Paul Mundt
e08f457c7c sh: __user annotations for __get/__put_user().
This adds in some more __user annotations. These weren't being
handled properly in some of the __get_user and __put_user paths,
so tidy those up.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08 02:43:36 +00:00
Paul Mundt
9a412847fb sh: Fix se73180 platform device registration.
Copy and paste error from se7343, fix it up.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-04 11:07:23 +09:00
Evgeniy Polyakov
66c5227ecd sh: trivial build cleanups.
Several errors were spotted during building for custom config (SMP
included). Although SMP still does not compile (no ipi and
__smp_call_function) and does not work, this looks a bit cleaner.
Some other errors obtained via gcc-4.1.0 build.

Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-31 13:46:21 +09:00
Paul Mundt
31d106c68b sh: Fix dreamcast build for IRQ changes.
When the irq.h changes went in, the dreamcast code was still
referencing an old value. Switch it back to the IRQ number,
which fixes this:

arch/sh/boards/dreamcast/irq.c: In function `disable_systemasic_irq':
arch/sh/boards/dreamcast/irq.c:59: error: `OFFCHIP_IRQ_BASE' undeclared (first
use in this function)
arch/sh/boards/dreamcast/irq.c:59: error: (Each undeclared identifier is reported only once
arch/sh/boards/dreamcast/irq.c:59: error: for each function it appears in.)

Reported-by: Adrian McMenamin <adrian@newgolddream.dyndns.info>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-21 15:10:04 +09:00
Paul Mundt
26bbfda8b1 sh: Wire up signalfd/timerfd/eventfd syscalls.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-21 14:32:14 +09:00
Christoph Hellwig
fce692e798 sh: revert addition of page fault notifiers
Just at the time you added them on sh we're removing them from other
architectures. As there's no user yet this patch just removes them
completely. Once you actually have a kprobes patch it should follow
the direct call to kprobes_fault_handler model that powerpc, s390 and
sparc64 employ in 2.6.22-rc1 and that I'm updating other architectures
to.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-21 14:32:10 +09:00
kogiidena
ad05acd6e9 sh: landisk: Header cleanups.
Signed-off-by: kogiidena <kogiidena@eggplant.ddo.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-14 09:18:35 +09:00
Stephen Rothwell
04dd08b45b Consolidate asm/poll.h
These files are almost all the same.

This patch could be made even simpler if we don't mind POLLREMOVE turning
up in a few architectures that didn't have it previously (which should be
OK as POLLREMOVE is not used anywhere in the current tree).

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-11 08:29:34 -07:00
Linus Torvalds
d84c4124c4 Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6:
  sh: Fix stacktrace simplification fallout.
  sh: SH7760 DMABRG support.
  sh: clockevent/clocksource/hrtimers/nohz TMU support.
  sh: Truncate MAX_ACTIVE_REGIONS for the common case.
  rtc: rtc-sh: Fix rtc_dev pointer for rtc_update_irq().
  sh: Convert to common die chain.
  sh: Wire up utimensat syscall.
  sh: landisk mv_nr_irqs definition.
  sh: Fixup ndelay() xloops calculation for alternate HZ.
  sh: Add 32-bit opcode feature CPU flag.
  sh: Fix PC adjustments for varying opcode length.
  sh: Support for SH-2A 32-bit opcodes.
  sh: Kill off redundant __div64_32 symbol export.
  sh: Share exception vector table for SH-3/4.
  sh: Always define TRAPA_BUG_OPCODE.
  sh: __GFP_REPEAT for pte allocations, too.
  rtc: rtc-sh: Fix up dev_dbg() warnings.
  sh: generic quicklist support.
2007-05-09 13:08:20 -07:00
Linus Torvalds
9a9136e270 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: (25 commits)
  sound: convert "sound" subdirectory to UTF-8
  MAINTAINERS: Add cxacru website/mailing list
  include files: convert "include" subdirectory to UTF-8
  general: convert "kernel" subdirectory to UTF-8
  documentation: convert the Documentation directory to UTF-8
  Convert the toplevel files CREDITS and MAINTAINERS to UTF-8.
  remove broken URLs from net drivers' output
  Magic number prefix consistency change to Documentation/magic-number.txt
  trivial: s/i_sem /i_mutex/
  fix file specification in comments
  drivers/base/platform.c: fix small typo in doc
  misc doc and kconfig typos
  Remove obsolete fat_cvf help text
  Fix occurrences of "the the "
  Fix minor typoes in kernel/module.c
  Kconfig: Remove reference to external mqueue library
  Kconfig: A couple of grammatical fixes in arch/i386/Kconfig
  Correct comments in genrtc.c to refer to correct /proc file.
  Fix more "deprecated" spellos.
  Fix "deprecated" typoes.
  ...

Fix trivial comment conflict in kernel/relay.c.
2007-05-09 12:54:17 -07:00
David Rientjes
d16aaffa75 sh: dma: use __maybe_unused
There is no such thing as labeling a variable as __attribute__((used)).  Since
ts_shift is not referenced in inline assembly, we assume that we're simply
suppressing a warning here if the variable is declared but unreferenced.

Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09 12:30:57 -07:00
Manuel Lauss
fc467a2623 sh: SH7760 DMABRG support.
The DMABRG is a special DMA unit within the SH7760 which does data
transfers from main memory to Audio units and USB shared memory.
It has 3 IRQ lines which generate 10 events, which have to be masked
unmasked and acked in a single 32bit register. It works independently
from the tradition SH DMAC, but blocks usage of DMAC channel 0.

This patch adds 2 functions to associate callbacks with DMABRG events
and initialization.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-09 17:36:15 +09:00
Paul Mundt
57be2b484a sh: clockevent/clocksource/hrtimers/nohz TMU support.
This adds basic support for clockevents and clocksources,
presently only implemented for TMU-based systems (which
are the majority of SH-3 and SH-4 systems).

The old NO_IDLE_HZ implementation is also dropped completely,
the only users of this were on TMU-based systems anyways.

More work needs to be done to generalize the TMU handling,
in that the current implementation is rather tied to the
notion of TMU0 and TMU1 utilization.

Additionally, as more SH timers switch over to this scheme,
we'll be able to gut most of the remaining system timer
infrastructure that existed before.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-09 17:33:24 +09:00
Uwe Kleine-König
5886269962 fix file specification in comments
Many files include the filename at the beginning, serveral used a wrong one.

Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-05-09 08:58:16 +02:00
Paul Mundt
b118ca572d sh: Convert to common die chain.
This went in immediately after SH added the die chain notifiers,
so move over to that instead..

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-09 10:55:38 +09:00
Paul Mundt
21ec4c6453 sh: Wire up utimensat syscall.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-09 10:42:48 +09:00
Paul Mundt
074f98df05 sh: Add 32-bit opcode feature CPU flag.
Add a CPU flag for the CPUs that support 32-bit opcodes, which
gets passed down to userspace.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-09 01:35:01 +00:00
Paul Mundt
bd0799977c sh: Support for SH-2A 32-bit opcodes.
SH-2A supports both 16 and 32-bit instructions, add a simple helper
for figuring out the instruction size in the places where there are
hardcoded 16-bit assumptions.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-09 01:35:01 +00:00
Paul Mundt
44530c696b sh: Always define TRAPA_BUG_OPCODE.
Previously this was only set when CONFIG_BUG=y. While we rely
on that for handle_BUG() dispatch, we still want to hand the
opcode off to the die chain notifier for determining the trap
value.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-09 01:35:01 +00:00
Paul Mundt
1039b9a9d8 sh: __GFP_REPEAT for pte allocations, too.
This got dropped in the quicklist conversion, add it back in..

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-09 01:35:01 +00:00
Paul Mundt
5f8c9908f2 sh: generic quicklist support.
This moves SH over to the generic quicklists. As per x86_64,
we have special mappings for the PGDs, so these go on their
own list..

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-09 01:35:00 +00:00
Jeff Dike
5dc12ddee9 Remove tas()
tas() has no users, so get rid of it.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: <linux-arch@vger.kernel.org>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:20 -07:00
David Gibson
0bb5e19d63 Clean up mostly unused IOSPACE macros
Most architectures defined three macros, MK_IOSPACE_PFN(), GET_IOSPACE()
and GET_PFN() in pgtable.h.  However, the only callers of any of these
macros are in Sparc specific code, either in arch/sparc, arch/sparc64 or
drivers/sbus.

This patch removes the redundant macros from all architectures except
sparc and sparc64.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:13 -07:00
Simon Horman
6672f76a5a kdump/kexec: calculate note size at compile time
Currently the size of the per-cpu region reserved to save crash notes is
set by the per-architecture value MAX_NOTE_BYTES.  Which in turn is
currently set to 1024 on all supported architectures.

While testing ia64 I recently discovered that this value is in fact too
small.  The particular setup I was using actually needs 1172 bytes.  This
lead to very tedious failure mode where the tail of one elf note would
overwrite the head of another if they ended up being alocated sequentially
by kmalloc, which was often the case.

It seems to me that a far better approach is to caclculate the size that
the area needs to be.  This patch does just that.

If a simpler stop-gap patch for ia64 to be squeezed into 2.6.21(.X) is
needed then this should be as easy as making MAX_NOTE_BYTES larger in
arch/asm-ia64/kexec.h.  Perhaps 2048 would be a good choice.  However, I
think that the approach in this patch is a much more robust idea.

Acked-by:  Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:07 -07:00
Christoph Hellwig
1eeb66a1bb move die notifier handling to common code
This patch moves the die notifier handling to common code.  Previous
various architectures had exactly the same code for it.  Note that the new
code is compiled unconditionally, this should be understood as an appel to
the other architecture maintainer to implement support for it aswell (aka
sprinkling a notify_die or two in the proper place)

arm had a notifiy_die that did something totally different, I renamed it to
arm_notify_die as part of the patch and made it static to the file it's
declared and used at.  avr32 used to pass slightly less information through
this interface and I brought it into line with the other architectures.

[akpm@linux-foundation.org: build fix]
[akpm@linux-foundation.org: fix vmalloc_sync_all bustage]
[bryan.wu@analog.com: fix vmalloc_sync_all in nommu]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: <linux-arch@vger.kernel.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:04 -07:00
Ryusuke Sakato
39374aadcd sh: R7785RP board updates.
Some fixups for the R7785RP board. Gets iVDR working.

Signed-off-by: Ryusuke Sakato <sakato.ryusuke@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:11:57 +00:00
Paul Mundt
3a2e117e22 sh: Add die chain notifiers.
Add the atomic die chains in, kprobes needs these.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:11:57 +00:00
Ryusuke Sakato
6865f0ea6a sh: Solution Engine 7722 board support.
This adds more full-featured support for the SH7722 Solution Engine.
Previously this was using the generic board, and lacked most of the
peripheral support.

Signed-off-by: Ryusuke Sakato <sakato.ryusuke@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:11:57 +00:00
Paul Mundt
6b817c0348 sh: Fix r7780rp build.
With the addition of the R7780MP and R7785RP, the R7780RP build
ended up breaking. Trivial compile fix.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:11:57 +00:00
Paul Mundt
4d5ade5b29 sh: kdump support.
This adds support for kexec based crash dumps.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:11:56 +00:00
Paul Mundt
db62e5bd29 sh: Move clock reporting to its own proc entry.
Previously this was done in cpuinfo, but with the number of clocks
growing, it makes more sense to place this in a different proc entry.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:11:56 +00:00
Nobuhiro Iwamatsu
2a8ff4596c sh: Solution Engine SH7705 board and CPU updates.
This fixes up SH7705 CPU support and the SE7705 board
for some of the recent changes.

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.zh@hitachi.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:11:56 +00:00
dmitry pervushin
1929cb340b sh: SH7722 clock framework support.
This adds support for the SH7722 (MobileR) to the clock framework.

Signed-off-by: dmitry pervushin <dimka@nomadgs.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:11:56 +00:00
Paul Mundt
dd12666278 sh: Obey CONFIG_HZ for HZ definition.
This wasn't being set before, so now it's set for when it makes sense.
The shwdt case still requires HZ to be fixed at 1000 for the WOVF period,
so this is still preserved.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:11:56 +00:00
SUGIOKA Toshinobu
760bcb1dee sh: Fix fstatat64() syscall.
Signed-off-by: SUGIOKA Toshinobu <sugioka@itonet.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:11:55 +00:00
Nobuhiro Iwamatsu
b75762302e sh: SH7780 Solution Engine board support.
This adds support for the SH7780-based Solution Engine reference board.

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.zh@hitachi.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:11:55 +00:00
Paul Mundt
0264f16039 sh: Tidy up L-BOX area5 addresses.
L-BOX can use the normal PA_AREA5_IO, there's no reason for it to
reproduce it.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:11:55 +00:00
Paul Mundt
01066625e9 sh: bootmem tidying for discontig/sparsemem preparation.
This reworks some of the node 0 bootmem initialization in
preparation for discontigmem and sparsemem support.

ARCH_POPULATES_NODE_MAP is switched to as a result of this.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:10:54 +00:00
Nobuhiro Iwamatsu
9465a54fa4 sh: MS7712SE01 board support.
Support the SH7712 (SH3-DSP) Solution Engine reference board.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:10:54 +00:00
Nobuhiro Iwamatsu
c86c5a9104 sh: L-BOX RE2 support.
This adds support for the L-BOX RE2 router.

	http://www.nttcom.co.jp/l-box/

L-BOX RE2 is a SH7751R-based router. It has CF, Cardbus, serial,
and LAN x2. This is one of the very few SH boards that a general
person can obtain now.

The L-BOX shipped with a 2.4.28 kernel, this is a rewritten patch
adding it to current git.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:10:54 +00:00
Paul Mundt
32351a28a7 sh: Add SH7785 Highlander board support (R7785RP).
This adds preliminary support for the SH7785-based Highlander board.
Some of the Highlander support code is reordered so that most of it
can be reused directly.

This also plugs in missing SH7785 checks in the places that need it,
as this is the first board to support the CPU.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:10:53 +00:00
Paul Mundt
be782df54c sh: NR_IRQS consolidation.
Each board sets the total number of IRQs that it's interested in via
the machvec. Previously we cared about the off vs on-chip IRQ range,
but any code relying on that is long dead. Set NR_IRQS to something
sensible given the vector range, and allow boards to cap it if they
really care.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:10:53 +00:00
Paul Mundt
fa69151173 sh: generic BUG() support.
Wire up GENERIC_BUG for SH. This moves off of the special bug
frame and on to the generic struct bug_entry. Roughly the same
semantics are retained, and we can kill off some of the verbose
BUG() reporting code.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:10:53 +00:00
Paul Mundt
fa5da2f7bd sh: Bring kgdb back from the dead.
This code has suffered quite a bit of bitrot, do some basic
tidying to get it to a reasonably functional state again.
This gets the basic support and the console working again.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:10:51 +00:00
Linus Torvalds
ea62ccd00f Merge branch 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6
* 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6: (231 commits)
  [PATCH] i386: Don't delete cpu_devs data to identify different x86 types in late_initcall
  [PATCH] i386: type may be unused
  [PATCH] i386: Some additional chipset register values validation.
  [PATCH] i386: Add missing !X86_PAE dependincy to the 2G/2G split.
  [PATCH] x86-64: Don't exclude asm-offsets.c in Documentation/dontdiff
  [PATCH] i386: avoid redundant preempt_disable in __unlazy_fpu
  [PATCH] i386: white space fixes in i387.h
  [PATCH] i386: Drop noisy e820 debugging printks
  [PATCH] x86-64: Fix allnoconfig error in genapic_flat.c
  [PATCH] x86-64: Shut up warnings for vfat compat ioctls on other file systems
  [PATCH] x86-64: Share identical video.S between i386 and x86-64
  [PATCH] x86-64: Remove CONFIG_REORDER
  [PATCH] x86-64: Print type and size correctly for unknown compat ioctls
  [PATCH] i386: Remove copy_*_user BUG_ONs for (size < 0)
  [PATCH] i386: Little cleanups in smpboot.c
  [PATCH] x86-64: Don't enable NUMA for a single node in K8 NUMA scanning
  [PATCH] x86: Use RDTSCP for synchronous get_cycles if possible
  [PATCH] i386: Add X86_FEATURE_RDTSCP
  [PATCH] i386: Implement X86_FEATURE_SYNC_RDTSC on i386
  [PATCH] i386: Implement alternative_io for i386
  ...

Fix up trivial conflict in include/linux/highmem.h manually.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-05 14:55:20 -07:00
Jean Delvare
a9dfd281a7 PCI: scatterlist.h needs types.h
Most architectures' scatterlist.h use the type dma_addr_t, but omit to
include <asm/types.h> which defines it.  This could lead to build failures,
so let's add the missing includes.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-02 19:02:34 -07:00
Jeremy Fitzhardinge
d6dd61c831 [PATCH] x86: PARAVIRT: add hooks to intercept mm creation and destruction
Add hooks to allow a paravirt implementation to track the lifetime of
an mm.  Paravirtualization requires three hooks, but only two are
needed in common code.  They are:

arch_dup_mmap, which is called when a new mmap is created at fork

arch_exit_mmap, which is called when the last process reference to an
  mm is dropped, which typically happens on exit and exec.

The third hook is activate_mm, which is called from the arch-specific
activate_mm() macro/function, and so doesn't need stub versions for
other architectures.  It's called when an mm is first used.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: linux-arch@vger.kernel.org
Cc: James Bottomley <James.Bottomley@SteelEye.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
2007-05-02 19:27:14 +02:00
Linus Torvalds
0278ef8b48 Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: (67 commits)
  [SCSI] SUNESP: Complete driver rewrite to version 2.0
  [SPARC64]: Convert PCI over to generic struct iommu/strbuf.
  [SPARC]: device_node name constification fallout
  [SPARC64]: Convert SBUS over to generic iommu/strbuf structs.
  [SPARC64]: Add generic iommu and strbuf structs to iommu.h
  [SPARC64]: Consolidate {sbus,pci}_iommu_arena.
  [SPARC]: Make device_node name and type const
  [SPARC64]: constify some paramaters of OF routines
  [TIGON3]: of_get_property() returns const.
  [SPARC64]: Fix PCI rework to adhere to of_get_property() const return.
  [SPARC64]: Document and fix calculation of pages_avail.
  [SPARC64]: Make sure pbm->prom_node is setup easly enough in psycho.c
  [SPARC64]: Use bootmem_bootmap_pages() in choose_bootmap_pfn().
  [SPARC64]: Add proper header file extern for cmdline_memory_size.
  [SPARC64]: Kill sparc_ultra_dump_{i,d}tlb()
  [SPARC64]: Use DECLARE_BITMAP and BITS_TO_LONGS in mm/init.c
  [SPARC64]: Give move verbose show_mem() output just like i386.
  [SPARC64]: Mark show_mem() printk's with KERN_INFO.
  [SPARC64]: Kill kvaddr_to_phys() and friends.
  [SPARC64]: Privatize sun4u_get_pte() and fix name.
  ...
2007-04-27 09:29:04 -07:00
David S. Miller
ded220bd8f [STRING]: Move strcasecmp/strncasecmp to lib/string.c
We have several platforms using local copies of identical
code.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 01:54:39 -07:00
Eric Dumazet
92f37fd2ee [NET]: Adding SO_TIMESTAMPNS / SCM_TIMESTAMPNS support
Now that network timestamps use ktime_t infrastructure, we can add a new
SOL_SOCKET sockopt  SO_TIMESTAMPNS.

This command is similar to SO_TIMESTAMP, but permits transmission of
a 'timespec struct' instead of a 'timeval struct' control message.
(nanosecond resolution instead of microsecond)

Control message is labelled SCM_TIMESTAMPNS instead of SCM_TIMESTAMP

A socket cannot mix SO_TIMESTAMP and SO_TIMESTAMPNS : the two modes are
mutually exclusive.

sock_recv_timestamp() became too big to be fully inlined so I added a
__sock_recv_timestamp() helper function.

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
CC: linux-arch@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:24:21 -07:00
Eric Dumazet
ae40eb1ef3 [NET]: Introduce SIOCGSTAMPNS ioctl to get timestamps with nanosec resolution
Now network timestamps use ktime_t infrastructure, we can add a new
ioctl() SIOCGSTAMPNS command to get timestamps in 'struct timespec'.
User programs can thus access to nanosecond resolution.

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
CC: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:24:04 -07:00
Kristoffer Ericson
b863f46e6a sh: Trivial fix for hp6xx build.
The IRQ3 define was removed when asm-sh/irq.h was cleaned up,
this updates the hp6xx header to use the IRQ number directly.

Signed-off-by: Kristoffer Ericson <kristoffer_e1@hotmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-03-28 19:45:59 +09:00
Paul Mundt
310f7963c2 sh: Fixup __cmpxchg() compile breakage with gcc4.
As reported by Manuel:

When I build linux with GCC-4.x and enable
CONFIG_CC_OPTIMIZE_FOR_SIZE linking fails with this error:

  LD      .tmp_vmlinux1
  kernel/built-in.o: In function '__cmpxchg_called_with_bad_pointer'
  make[1]: *** [.tmp_vmlinux1] Error 1
  make: *** [_all] Error 2

This ended up being an inlining problem, fixed by explicitly
including linux/compiler.h and grabbing the definitions from there.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-03-28 17:26:19 +09:00
Paul Mundt
3afb209a43 sh: Fix bogus regs pointer in do_IRQ().
SH-3 and SH-4 were trampling the register, and SH-2 wasn't even
setting it in the first place. This ended up with some rather
broken behaviour in the sysrq show_regs().

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-03-14 13:03:35 +09:00
Mike Frysinger
fbd168461e sh: Convert struct ioctls to static defines.
This fixes up some compile failures for cases where we don't include
all of the headers. There's not much point in keeping the struct
references around anyways, most of the others have been converted
already.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-03-12 16:12:45 +09:00
Paul Mundt
72a121ba6d sh: Define missing __NR_readahead.
For some reason sh was missing __NR_readahead, even though the
syscall was wired up, and the slot was reserved. Caught with
dwmw2's missing syscall checker.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-03-12 15:55:19 +09:00
Paul Mundt
39e688a94b sh: Revert lazy dcache writeback changes.
These ended up causing too many problems on older parts,
revert for now..

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-03-05 19:46:47 +09:00
Paul Mundt
87e29cacb7 sh: Use L1_CACHE_BYTES for .data.cacheline_aligned.
Previously this was using a hardcoded 32, use L1_CACHE_BYTES for
cacheline alignment instead.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-03-05 14:13:26 +09:00
Stuart Menefy
9432f96803 sh: Clear UBC when not in use.
This takes care of tearing down the UBC so it's not inadvertently
left configured at the next context switch time. Failure to do
this results in spurious SIGTRAPs in certain debug sequences.

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-03-05 14:13:25 +09:00
Paul Mundt
9c57548f17 sh: rts7751r2d board updates.
This tidies up some of the rts7751r2d mess and gets it booting
again. Update the defconfig, too.

Signed-off-by: Masayuki Hosokawa <hosokawa@ace-jp.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-15 18:20:52 +09:00
Paul Mundt
e65fa9f59e sh: Kill off dead bigsur and ec3104 boards.
Neither of these have had any maintenance in years, and there's
no interest in keeping them straggling along. These have already
been slated for removal some time, so finally just get rid of them.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-14 15:06:09 +09:00
Paul Mundt
db2e1fa3f0 sh: Revert TLB miss fast-path changes that broke PTEA parts.
This ended up causing problems for older parts (particularly ones
using PTEA). Revert this for now, it can be added back in once it's
had some more testing.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-14 14:13:10 +09:00
Paul Mundt
c7666e72cf sh: define dma noncoherent API functions.
sh was missing these, too.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 11:11:22 +09:00
Paul Mundt
fe82891750 sh: Missing flush_dcache_all() proto in cacheflush.h.
Some boards need this, so provide a definition.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 11:09:15 +09:00
Paul Mundt
f5df54dc2e sh: Add cpu-features header to asm/Kbuild.
This is used by the libc for parsing CPU capability flags passed
via the ELF auxvt, needed for run-time selection of atomic opcodes
amongst other things.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 10:54:46 +09:00
Paul Mundt
a5ba7d5453 sh: Move __KERNEL__ up in asm/page.h.
This was breaking the uClibc build, which triggered the bogus page
size error.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 10:54:46 +09:00
Paul Mundt
b37814352d sh: Fix syscall numbering breakage.
We accidentally broke the inotify syscalls, fix those up again.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 10:54:46 +09:00
Paul Mundt
ea9af69481 sh: Local TLB flushing variants for SMP prep.
Rename the existing flush routines to local_ variants for use by
the IPI-backed global flush routines on SMP.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 10:54:45 +09:00
Paul Mundt
11c1965687 sh: Fixup cpu_data references for the non-boot CPUs.
There are a lot of bogus cpu_data-> references that only end up working
for the boot CPU, convert these to current_cpu_data to fixup SMP.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 10:54:45 +09:00
Paul Mundt
aec5e0e1c1 sh: Use a per-cpu ASID cache.
Previously this was implemented using a global cache, cache
this per-CPU instead and bump up the number of context IDs to
match NR_CPUS.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 10:54:45 +09:00
Manuel Lauss
9f8a5e3a44 sh: SH-DMAC compile fixes
This patch does the following:
- remove the make_ipr_irq stuff from dma-sh.c and replace it
  with a simple channel<->irq mapping table.
- add DMTEx_IRQ constants for sh4 cpus
- fix sh7751 DMAE irq number

The SH7780 uses the same IRQs for DMA as other SH4 types, so
I put the constants on top of the dma.h file.

Other CPU types need to #define their own DMTEx_IRQ contants
in their appropriate header.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 10:54:45 +09:00
Paul Mundt
26b7a78c55 sh: Lazy dcache writeback optimizations.
This converts the lazy dcache handling to the model described in
Documentation/cachetlb.txt and drops the ptep_get_and_clear() hacks
used for the aliasing dcaches on SH-4 and SH7705 in 32kB mode. As a
bonus, this slightly cuts down on the cache flushing frequency.

With that and the PTEA handling out of the way, the update_mmu_cache()
implementations can be consolidated, and we no longer have to worry
about which configuration the cache is in for the SH7705 case.

And finally, explicitly disable the lazy writeback on SMP (SH-4A).

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 10:54:44 +09:00
Paul Mundt
7a847f8190 sh: More tidying for large base pages.
There were a few more things that needed fixing up, namely THREAD_SIZE
and the TLB miss handler where certain PTRS_PER_PGD == PTRS_PER_PTE
assumptions were being made.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 10:54:44 +09:00
SUGIOKA Toshinobu
106dac130d sh: syscall 300 should be __NR_fstatat64.
syscall number 300 fails while testing with latest LTP
(ltp-full-20061121.tgz) on sh.

sys_fstatat64 is called on syscall 300 (see arch/sh/kernel/syscalls.S),
and __ARCH_WANT_STAT64 is defined in include/asm-sh/unistd.h, so
following patch seems correct.

Signed-off-by: SUGIOKA Toshinobu <sugioka@itonet.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 10:54:44 +09:00
Paul Mundt
f413d0d9fa sh: Use a jump call table for debug trap handlers.
This rips out most of the needlessly complicated sh_bios and kgdb
trap handling, and forces it all through a common fast dispatch path.
As more debug traps are inserted, it's important to keep them in sync
for all of the parts, not just SH-3/4.

As the SH-2 parts are unable to do traps in the >= 0x40 range, we
restrict the debug traps to the 0x30-0x3f range on all parts, and
also bump the kgdb breakpoint trap down in to this range (from 0xff
to 0x3c) so it's possible to use for nommu.

Optionally, this table can be padded out to catch spurious traps for
SH-3/4, but we don't do that yet..

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 10:54:43 +09:00
Tilman Schmidt
4564f9e5fd [PATCH] consolidate line discipline number definitions
The line discipline numbers N_* are currently defined for each architecture
individually, but (except for a seeming mistake) identically, in
asm/termios.h.  There is no obvious reason why these numbers should be
architecture specific, nor any apparent relationship with the termios
structure.  The total number of these, NR_LDISCS, is defined in linux/tty.h
anyway.  So I propose the following patch which moves the definitions of
the individual line disciplines to linux/tty.h too.

Three of these numbers (N_MASC, N_PROFIBUS_FDL, and N_SMSBLOCK) are unused
in the current kernel, but the patch still keeps the complete set in case
there are plans to use them yet.

Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11 10:51:26 -08:00
Paul Mundt
0a9b0db192 [APM] SH: Convert to use shared APM emulation.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-02-09 17:08:58 +00:00
Ralf Baechle
ec8c0446b6 [PATCH] Optimize D-cache alias handling on fork
Virtually index, physically tagged cache architectures can get away
without cache flushing when forking.  This patch adds a new cache
flushing function flush_cache_dup_mm(struct mm_struct *) which for the
moment I've implemented to do the same thing on all architectures
except on MIPS where it's a no-op.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13 09:27:08 -08:00
Rafael J. Wysocki
8a102eed9c [PATCH] PM: Fix SMP races in the freezer
Currently, to tell a task that it should go to the refrigerator, we set the
PF_FREEZE flag for it and send a fake signal to it.  Unfortunately there
are two SMP-related problems with this approach.  First, a task running on
another CPU may be updating its flags while the freezer attempts to set
PF_FREEZE for it and this may leave the task's flags in an inconsistent
state.  Second, there is a potential race between freeze_process() and
refrigerator() in which freeze_process() running on one CPU is reading a
task's PF_FREEZE flag while refrigerator() running on another CPU has just
set PF_FROZEN for the same task and attempts to reset PF_FREEZE for it.  If
the refrigerator wins the race, freeze_process() will state that PF_FREEZE
hasn't been set for the task and will set it unnecessarily, so the task
will go to the refrigerator once again after it's been thawed.

To solve first of these problems we need to stop using PF_FREEZE to tell
tasks that they should go to the refrigerator.  Instead, we can introduce a
special TIF_*** flag and use it for this purpose, since it is allowed to
change the other tasks' TIF_*** flags and there are special calls for it.

To avoid the freeze_process()-refrigerator() race we can make
freeze_process() to always check the task's PF_FROZEN flag after it's read
its "freeze" flag.  We should also make sure that refrigerator() will
always reset the task's "freeze" flag after it's set PF_FROZEN for it.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: David Howells <dhowells@redhat.com>
Cc: Andi Kleen <ak@muc.de>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13 09:05:49 -08:00
Paul Mundt
41504c3972 sh: SH-MobileR SH7722 CPU support.
This adds CPU support for the SH7722.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12 08:42:09 +09:00
Paul Mundt
5432143464 sh: Fixup dma_cache_sync() callers.
This now takes a struct device, update all of the callers.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12 08:42:09 +09:00
Paul Mundt
dc34d312c7 sh: BUG() handling through trapa vector.
Previously we haven't been doing anything with verbose BUG() reporting,
and we've been relying on the oops path for handling BUG()'s, which is
rather sub-optimal.

This switches BUG handling to use a fixed trapa vector (#0x3e) where we
construct a small bug frame post trapa instruction to get the context
right. This also makes it trivial to wire up a DIE_BUG for the atomic
die chain, which we couldn't really do before.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12 08:42:08 +09:00
Paul Mundt
ec723fbe7e sh: Split out atomic ops logically.
We have a few different ways to do the atomic operations, so split
them out in to different headers rather than bloating atomic.h.
Kernelspace gUSA will take this up to a third implementation.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12 08:42:08 +09:00
Paul Mundt
b6250e3729 sh: landisk board build fixes.
Get the landisk board building again..

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12 08:42:07 +09:00
Paul Mundt
fce3a24e70 sh: push-switch fixups for work_struct API damage.
INIT_WORK() dropped the data arg, so now we have to stash an extra
pointer and backpedal instead.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12 08:42:07 +09:00
Paul Mundt
b482ad5dae sh: Shut up csum_ipv6_magic() warnings.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12 08:42:07 +09:00
Paul Mundt
b9b382dabb sh: Reworked swap cache entry encoding for SH-X2 MMU.
In the 64-bit PTE case there's no point in restricting the encoding
to the low bits of the PTE, we can instead bump all of this up to
the high 32 bits and extend PTE_FILE_MAX_BITS to 32, adopting the
same convention used by x86 PAE.

There's a minor discrepency between the number of bits used for the
swap type encoding between 32 and 64-bit PTEs, but this is unlikely
to cause any problem given the extended offset.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12 08:42:06 +09:00
Alan Cox
be90038a24 [PATCH] tty: preparatory structures for termios revamp
In order to sort out our struct termios and add proper speed control we need
to separate the kernel and user termios structures.  Glibc is fine but the
other libraries rely on the kernel exported struct termios and we need to
extend this without breaking the ABI/API

To do so we add a struct ktermios which is the kernel view of a termios
structure and overlaps the struct termios with extra fields on the end for
now.  (That limitation will go away in later patches).  Some platforms (eg
alpha) planned ahead and thus use the same struct for both, others did not.

This just adds the structures but does not use them, it seems a sensible
splitting point for bisect if there are compile failures (not that I expect
them)

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:28:56 -08:00
Adrian Bunk
7d1362c0d0 [PATCH] cleanup asm/setup.h userspace visibility
Make the contents of the userspace asm/setup.h header consistent on all
architectures:

 - export setup.h to userspace on all architectures
 - export only COMMAND_LINE_SIZE to userspace
 - frv: move COMMAND_LINE_SIZE from param.h
 - i386: remove duplicate COMMAND_LINE_SIZE from param.h
 - arm:
   - export ATAGs to userspace
   - change u8/u16/u32 to __u8/__u16/__u32

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:46 -08:00
Ralf Baechle
d3fa72e455 [PATCH] Pass struct dev pointer to dma_cache_sync()
Pass struct dev pointer to dma_cache_sync()

dma_cache_sync() is ill-designed in that it does not have a struct device
pointer argument which makes proper support for systems that consist of a
mix of coherent and non-coherent DMA devices hard.  Change dma_cache_sync
to take a struct device pointer as first argument and fix all its callers
to pass it.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:41 -08:00
Arnd Bergmann
f5738ceed4 [PATCH] remove kernel syscalls
The last thing we agreed on was to remove the macros entirely for 2.6.19,
on all architectures. Unfortunately, I think nobody actually _did_ that,
so they are still there.

[akpm@osdl.org: x86_64 fix]
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Schafer <gschafer@zip.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:37 -08:00
Jamie Lenehan
ea0f8feaa0 sh: sh775x/titan fixes for irq header changes.
The following moves the creation of IPR interupts into setup-7750.c
and updates a few other things to make it all work after the "Drop
CPU subtype IRQ headers" commit. It boots and runs fine on my titan
board.

 - adds an ipr_idx to the ipr_data and uses a function in the subtype
   code to calculate the address of the IPR registers

 - adds a function to enable individual interrupt mode for externals
   in the subtype code and calls that from the titan board code
   instead of doing it directly.

 - I changed the shift in the ipr_data to be the actual # of bits to
   shift, instead of the numnber / 4 - made it easier to match with
   the manual.

Signed-off-by: Jamie Lenehan <lenehan@twibble.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06 12:05:02 +09:00
Paul Mundt
5b67954e80 sh: Fixup pte_mkhuge() build failure.
When hugetlbpage support isn't enabled, this can be bogus.
Wrap it back in _PAGE_FLAGS_HARD to avoid changes to the
base PTE when not aiming for larger sizes.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06 11:20:53 +09:00
Paul Mundt
afbfb52e47 sh: stacktrace/lockdep/irqflags tracing support.
Wire up all of the essentials for lockdep..

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06 10:45:40 +09:00
Paul Mundt
c03c69610b sh: Fixup movli.l/movco.l atomic ops for gcc4.
gcc4 gets a bit pissy about the outputs:

include/asm/atomic.h: In function 'atomic_add':
include/asm/atomic.h:37: error: invalid lvalue in asm statement
include/asm/atomic.h:30: error: invalid lvalue in asm output 1
...

this ended up being a thinko anyways, so just fix it up.

Verified for proper behaviour with the older toolchains, too.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06 10:45:40 +09:00
Paul Mundt
bd156147eb sh: dyntick infrastructure.
This adds basic NO_IDLE_HZ support to the SH timer API so timers
are able to wire it up. Taken from the ARM version, as it fit in
to our API with very few changes needed.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06 10:45:40 +09:00
Paul Mundt
1d118562c2 sh: Clock framework tidying.
This syncs up the SH clock framework with the linux/clk.h API,
for which there were only some minor changes required, namely
the clk_get() dev_id and subsequent callsites.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06 10:45:40 +09:00
Paul Mundt
510c72ad2d sh: Fixup various PAGE_SIZE == 4096 assumptions.
There were a number of places that made evil PAGE_SIZE == 4k
assumptions that ended up breaking when trying to play with
8k and 64k page sizes, this fixes those up.

The most significant change is the way we load THREAD_SIZE,
previously this was done via:

	mov	#(THREAD_SIZE >> 8), reg
	shll8	reg

to avoid a memory access and allow the immediate load. With
a 64k PAGE_SIZE, we're out of range for the immediate load
size without resorting to special instructions available in
later ISAs (movi20s and so on). The "workaround" for this is
to bump up the shift to 10 and insert a shll2, which gives a
bit more flexibility while still being much cheaper than a
memory access.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06 10:45:39 +09:00
Mark Glaisher
db9b99d461 sh: dma-api channel capability extensions.
This extends the SH DMA API for allowing handling of DMA
channels based off of their respective capabilities.

A couple of functions are added to the existing API,
the core bits are register_chan_caps() for registering
channel capabilities, and request_dma_bycap() for fetching
a channel dynamically based off of a capability set.

Signed-off-by: Mark Glaisher <mark.glaisher@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06 10:45:39 +09:00
Stuart Menefy
c9f0b1c141 sh: KSTK_EIP/KSTK_ESP consistency.
Two of the fields in /proc/[number]/stat are documented in
proc(5) as:

      kstkesp %lu
	     The current value of esp (stack pointer), as
	     found in the kernel stack page for the process.

      kstkeip %lu
	     The current EIP (instruction pointer).

The SH currently prints the the last SP and PC of the process
inside the kernel, while most other archs use the last user
space values.

This patch modifes the SH to display the user space values.

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06 10:45:38 +09:00
Stuart Menefy
9b3a53ab76 sh: TLB miss fast-path optimizations.
Handle simple TLB miss faults which can be resolved completely
from the page table in assembler.

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06 10:45:38 +09:00
Paul Mundt
9f5e8eee5c sh: generic push-switch framework.
This adds support for a generic push switch framework. Adaptable for
various switches, including GPIO switches and the push switches commonly
found on Renesas debug boards.

This allows switch states to be trivially reported through sysfs.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06 10:45:38 +09:00
Stuart Menefy
99a596f93b sh: pmd rework.
Remove extra bits from the pmd structure and store a kernel logical
address rather than a physical address. This allows it to be directly
dereferenced. Another piece of wierdness inherited from x86.

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06 10:45:38 +09:00
Stuart Menefy
6e4662ff49 sh: Use MMU.TTB register as pointer to current pgd.
Add TTB accessor functions and give it a sensible default
value. We will use this later for optimizing the fault
path.

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06 10:45:38 +09:00
Stuart Menefy
b5a1bcbee4 sh: Set up correct siginfo structures for page faults.
Remove the previous saving of fault codes into the thread_struct
as they are never used, and appeared to be inherited from x86.

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06 10:45:38 +09:00
Paul Mundt
21440cf04a sh: Preliminary support for SH-X2 MMU.
This adds some preliminary support for the SH-X2 MMU, used by
newer SH-4A parts (particularly SH7785).

This MMU implements a 'compat' mode with SH-X MMUs and an
'extended' mode for SH-X2 extended features. Extended features
include additional page sizes (8kB, 4MB, 64MB), as well as the
addition of page execute permissions.

The extended mode attributes are placed in a second data array,
which requires us to switch to 64-bit PTEs when in X2 mode.

With the addition of the exec perms, we also overhaul the mmap
prots somewhat, now that it's possible to handle them more
intelligently.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06 10:45:37 +09:00
Paul Mundt
b552c7e8bc sh: Hook SH7785 in to the build system.
Simple 7785 placeholders to start hooking up other bits of code.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06 10:45:37 +09:00
Paul Mundt
9a7ef6d59f sh: Drop CPU subtype IRQ headers.
This drops the various IRQ headers that were floating around
and primarily providing hardcoded IRQ definitions for the
various CPU subtypes. This quickly got to be an unmaintainable
mess, made even more evident by the subtle breakage introduced
by the SH-2 and SH-2A changes.

Now that subtypes are able to register IRQ maps directly, just
rip all of the headers out.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06 10:45:37 +09:00
Paul Mundt
710ee0cc45 sh: SE7206 build fixes.
A number of API changes happened underneath the 7206 patches, update
for everything that broke.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06 10:45:37 +09:00
Yoshinori Sato
b229632abd sh: Add SH-2A platform headers.
Mostly SH-2 wrappers..

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06 10:45:36 +09:00
Matthew Wilcox
e62438630c [PATCH] Centralise definitions of sector_t and blkcnt_t
CONFIG_LBD and CONFIG_LSF are spread into asm/types.h for no particularly
good reason.

Centralising the definition in linux/types.h means that arch maintainers
don't need to bother adding it, as well as fixing the problem with
x86-64 users being asked to make a decision that has absolutely no
effect.

The H8/300 porters seem particularly confused since I'm not aware of any
microcontrollers that need to support 2TB filesystems.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-04 19:41:15 -08:00
Al Viro
7c73a746ba [NET]: SH checksum annotations and cleanups.
* sanitize prototypes, annotate
* kill useless shifts
* usual ntohs->shift

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02 21:23:22 -08:00
Benjamin Herrenschmidt
c6dbaef22a Driver core: add dev_archdata to struct device
Add arch specific dev_archdata to struct device

Adds an arch specific struct dev_arch to struct device. This enables
architecture to add specific fields to every device in the system, like
DMA operation pointers, NUMA node ID, firmware specific data, etc...

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Andi Kleen <ak@suse.de>
Acked-By: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01 14:52:01 -08:00
Jamie Lenehan
bd71ab88de sh: Fix IPR-IRQ's for IRQ-chip change breakage.
The conversion from IPR-IRQ to IRQ-chip resulted in the
ipr data being allocated in a local variable in
make_ipr_irq - breaking anything using IPR interrupts.

This changes all of the callers of make_ipr_irq to
allocate a static structure containing the IPR data which
is then passed to make_ipr_irq. This removes the need for
make_ipr_irq to allocate any additional space for the IPR
information.

Signed-off-by: Jamie Lenehan <lenehan@twibble.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-10-31 12:53:28 +09:00
Paul Mundt
6887d83d6a sh: Wire up new syscalls.
This wires up sys_move_pages, sys_getcpu, and sys_epoll_pwait.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-10-31 12:53:28 +09:00
Paul Mundt
66a740572d sh: Convert INTC2 to IRQ table registration.
Currently the INTC2 code contains a fixed IRQ table that it
iterates through to set the handler type, we move this in to
the CPU subtype setup code instead and allow for submitting
the table that way.

This drops the ST40 tables, as nothing has been happening
with those processors, while converting the only existing
users to use the new table directly (SH7760 and SH7780).

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-10-20 15:30:55 +09:00
Paul Mundt
c2a560f533 sh: Add some missing board headers.
Some of these were dropped in the header directory rework, add
the few missing ones back in.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-10-19 17:31:22 +09:00
Paul Mundt
1f666587db sh: Fix exception_handling_table alignment.
With the recent change ripping out interrupt_table, explicit
padding of the table was missing, causing bad things to happen
when manually inserting handlers in to the table. This problem
particularly showed up in relation to do_fpu_state_restore()
which was inserted quite deeply in to the table and ended up
scribbling over a slab object.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-10-19 16:30:32 +09:00
Paul Mundt
082c44d20e sh: Cleanup board header directories.
Now with the ide.h mess sorted out, most of these boards
don't need their own directory. Move the headers out, and
update the driver paths.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-10-19 16:30:32 +09:00
Paul Mundt
4a58eaca7c sh: Remove board-specific ide.h headers.
The driver that these were using never made it in to
drivers/ide, so kill off the rest of the cruft. These
will have to be reworked for board-specific platform
devices through libata when they're added back through
the setup code.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-10-19 16:30:32 +09:00
Paul Mundt
6b0022305f sh: Proper show_stack/show_trace() implementation.
This splits out some of the previous show_stack() implementation which
was mostly doing the show_trace() work without actually dumping any of
the stack contents. This now gets split in to two sections, where we
do the fetching of the stack pointer and subsequent stack dumping in
show_stack(), while moving the call trace in to show_trace().

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-10-19 16:30:31 +09:00
Linus Torvalds
9eb2007488 Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6:
  sh: SH-4A UBC support
  sh: interrupt exception handling rework
  sh: Default enable R7780RP IRQs.
  sh: Zero-out coherent buffer in consistent_alloc().
  sh: Convert IPR-IRQ to IRQ chip.
  sh: Convert INTC2 IRQ handler to irq_chip.
  sh: Fix pr_debug statements for sh4
  sh: Convert r7780rp IRQ handler to IRQ chip.
  sh: Updates for IRQ handler changes.
  sh: Kill off timer_ops get_frequency().
  sh: First step at generic timeofday support.
2006-10-12 08:33:23 -07:00
Ryusuke Sakato
8ae91b9ad8 sh: SH-4A UBC support
A simple patch to enable the UBC on SH-4A.

Signed-off-by: Ryusuke Sakato <sakato@hsdv.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-10-12 12:16:13 +09:00
Matthew Wilcox
e50190a834 [PATCH] Consolidate check_signature
There's nothing arch-specific about check_signature(), so move it to
<linux/io.h>.  Use a cross between the Alpha and i386 implementations as
the generic one.

Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11 11:14:23 -07:00
Paul Mundt
525ccc452c sh: Convert INTC2 IRQ handler to irq_chip.
More struct irq_chip conversions, this time the INTC2 handlers.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-10-06 17:35:48 +09:00
Paul Mundt
35f3c5185b sh: Updates for IRQ handler changes.
Trivial fixes for build breakage introduced by IRQ handler changes.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-10-06 15:31:16 +09:00
Paul Mundt
a700f3594d sh: Kill off timer_ops get_frequency().
We're not using this anywhere these days, kill it off.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-10-06 15:26:21 +09:00
Paul Mundt
4588214526 sh: First step at generic timeofday support.
At the moment we wrap GENERIC_TIME around our existing timer API.
As boards start providing their own clocksources, they're able to
select GENERIC_TIME accordingly and optimize out most of the timer
API.

Once the current timers have been reworked as proper clocksource
drivers, the rest of the place holders for the timer API can go
away and we can flip on GENERIC_TIME unconditionally.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-10-06 15:26:21 +09:00
Uwe Zeisberger
f30c226954 fix file specification in comments
Many files include the filename at the beginning, serveral used a wrong one.

Signed-off-by: Uwe Zeisberger <Uwe_Zeisberger@digi.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-03 23:01:26 +02:00
Paul Mundt
fac99d9746 sh: Fixup __raw_read_trylock().
generic__raw_read_trylock() was broken, fix up the __raw_read_trylock()
implementation for something sensible. Taken from m32r, which has the
same use cases.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-10-03 14:13:09 +09:00
Paul Mundt
2914d4da17 sh: Kill off remaining config.h references.
A few of these managed to sneak back in, get rid of them once
and for all.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-10-03 13:19:02 +09:00
Paul Mundt
3e6c999de9 sh: Initial gitignore list
Ignore build-time generated files.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-10-03 13:16:15 +09:00
Paul Mundt
711fa80968 sh: build fixes for defconfigs.
Get all of the defconfigs building again.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-10-03 13:14:04 +09:00
Paul Mundt
059fbd6a5e sh: Kill off more dead headers.
Some old rtc and io headers were left hanging around, kill them off..

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-10-03 13:12:38 +09:00
Arnd Bergmann
135ab6ec8f [PATCH] remove remaining errno and __KERNEL_SYSCALLS__ references
The last in-kernel user of errno is gone, so we should remove the definition
and everything referring to it.  This also removes the now-unused lib/execve.c
file that was introduced earlier.

Also remove every trace of __KERNEL_SYSCALLS__ that still remained in the
kernel.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Andi Kleen <ak@muc.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ian Molton <spyro@f2s.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Hirokazu Takata <takata.hirokazu@renesas.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp>
Cc: Richard Curnow <rc@rc0.org.uk>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp>
Cc: Chris Zankel <chris@zankel.net>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 07:57:23 -07:00
Serge E. Hallyn
96b644bdec [PATCH] namespaces: utsname: use init_utsname when appropriate
In some places, particularly drivers and __init code, the init utsns is the
appropriate one to use.  This patch replaces those with a the init_utsname
helper.

Changes: Removed several uses of init_utsname().  Hope I picked all the
	right ones in net/ipv4/ipconfig.c.  These are now changed to
	utsname() (the per-process namespace utsname) in the previous
	patch (2/7)

[akpm@osdl.org: CIFS fix]
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Cc: Kirill Korotaev <dev@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: Andrey Savochkin <saw@sw.ru>
Cc: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 07:57:21 -07:00
Olaf Hering
fb48388337 [PATCH] remove SYSRQ_KEY and related defines from ppc/sh/h8300
Remove unused global SYSRQ_KEY from ppc and powerpc
Remove unused define SYSRQ_KEY from sh/sh64 and h8300
Remove unused pckbd_sysrq_xlate and kbd_sysrq_xlate usage

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-01 00:39:22 -07:00
Martin Schwidefsky
ef6edc9746 [PATCH] Directed yield: cpu_relax variants for spinlocks and rw-locks
On systems running with virtual cpus there is optimization potential in
regard to spinlocks and rw-locks.  If the virtual cpu that has taken a lock
is known to a cpu that wants to acquire the same lock it is beneficial to
yield the timeslice of the virtual cpu in favour of the cpu that has the
lock (directed yield).

With CONFIG_PREEMPT="n" this can be implemented by the architecture without
common code changes.  Powerpc already does this.

With CONFIG_PREEMPT="y" the lock loops are coded with _raw_spin_trylock,
_raw_read_trylock and _raw_write_trylock in kernel/spinlock.c.  If the lock
could not be taken cpu_relax is called.  A directed yield is not possible
because cpu_relax doesn't know anything about the lock.  To be able to
yield the lock in favour of the current lock holder variants of cpu_relax
for spinlocks and rw-locks are needed.  The new _raw_spin_relax,
_raw_read_relax and _raw_write_relax primitives differ from cpu_relax
insofar that they have an argument: a pointer to the lock structure.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-01 00:39:21 -07:00
Linus Torvalds
b98adfccdf Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6: (108 commits)
  sh: Fix occasional flush_cache_4096() stack corruption.
  sh: Calculate shm alignment at runtime.
  sh: dma-mapping compile fixes.
  sh: Initial vsyscall page support.
  sh: Clean up PAGE_SIZE definition for assembly use.
  sh: Selective flush_cache_mm() flushing.
  sh: More intelligent entry_mask/way_size calculation.
  sh: Support for L2 cache on newer SH-4A CPUs.
  sh: Update kexec support for API changes.
  sh: Optimized readsl()/writesl() support.
  sh: Report movli.l/movco.l capabilities.
  sh: CPU flags in AT_HWCAP in ELF auxvt.
  sh: Add support for 4K stacks.
  sh: Enable /proc/kcore support.
  sh: stack debugging support.
  sh: select CONFIG_EMBEDDED.
  sh: machvec rework.
  sh: Solution Engine SH7343 board support.
  sh: SH7710VoIPGW board support.
  sh: Enable verbose BUG() support.
  ...
2006-09-27 08:49:07 -07:00
Randy Dunlap
ebba5f9fcb [PATCH] consistently use MAX_ERRNO in __syscall_return
Consistently use MAX_ERRNO when checking for errors in __syscall_return().

[ralf@linux-mips.org: build fix]
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27 08:26:18 -07:00
Paul Mundt
f3c2575818 sh: Calculate shm alignment at runtime.
Set the SHM alignment at runtime, based off of probed cache desc.
Optimize get_unmapped_area() to only colour align shared mappings.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 18:36:17 +09:00
Paul Mundt
87b0ef91b6 sh: dma-mapping compile fixes.
Silly bug, make it build again..

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 18:34:41 +09:00
Paul Mundt
19f9a34f87 sh: Initial vsyscall page support.
This implements initial support for the vsyscall page on SH.
At the moment we leave it configurable due to having nommu
to support from the same code base. We hook it up for the
signal trampoline return at present, with more to be added
later, once uClibc catches up.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 18:33:49 +09:00
Paul Mundt
8c12b5dc13 sh: Clean up PAGE_SIZE definition for assembly use.
We want to be able to use PAGE_SIZE all over the place,
this is the same approach adopted by other architectures..

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 18:31:06 +09:00
Paul Mundt
72c35543f8 sh: Support for L2 cache on newer SH-4A CPUs.
This implements preliminary support for the L2 caches found
on newer SH-4A CPUs.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 18:27:43 +09:00
Paul Mundt
9d549a7d8e sh: Update kexec support for API changes.
This was falling a bit behind..

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 18:26:05 +09:00
Paul Mundt
05ae915851 sh: Optimized readsl()/writesl() support.
Implement optimized copies of readsl()/writesl().

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 18:25:24 +09:00
Paul Mundt
2220d16493 sh: Report movli.l/movco.l capabilities.
Add llsc to cpu_flags[] and comment cpu-features.h.

Signed-off-by: Jamie Lenehan <nynaeve@twibble.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 18:24:28 +09:00
Paul Mundt
315bb96824 sh: CPU flags in AT_HWCAP in ELF auxvt.
Encode processor flags in AT_HWCAP in the ELF auxiliary vector.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 18:22:53 +09:00
Paul Mundt
a6a3113989 sh: Add support for 4K stacks.
This enables support for 4K stacks on SH.

Currently this depends on DEBUG_KERNEL, but likely all boards
will switch to this as the default in the future.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 18:22:14 +09:00
Paul Mundt
d153ea88dc sh: stack debugging support.
This adds a DEBUG_STACK_USAGE and DEBUG_STACKOVERFLOW for SH.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 18:20:16 +09:00
Paul Mundt
2c7834a6f1 sh: machvec rework.
Some more machvec overhauling and setup code cleanup. Kill off
get_system_type() and platform_setup(), we can do these both
through the machvec. While we're add it, kill off more useless
mach.c's and drop some legacy cruft from setup.c.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 18:17:31 +09:00
Paul Mundt
bc8fb5d047 sh: Solution Engine SH7343 board support.
This adds support for the SE7343 board.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 18:09:34 +09:00
Paul Mundt
5a4053b232 sh: Kill off dead boards.
None of these have been maintained in years, and no one seems to
be interested in doing so, so just get rid of them.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 18:00:19 +09:00
Paul Mundt
781125ca58 sh: New atomic ops for SH-4A movli.l/movco.l
SH-4A implements LL/SC instructions, so we implement a simple
set of atomic operations using these.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 17:52:19 +09:00
Paul Mundt
91550f715b sh: Kill off the rest of the legacy rtc mess.
With the new RTC class driver, we can get rid of most of the
old left over cruft.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 17:45:01 +09:00
Takashi YOSHII
51e22e7a05 sh: SHMIN board support.
This adds support for the SHMIN SH7706 board.

Signed-off-by: Takashi YOSHII <takasi-y@ops.dti.ne.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 17:41:31 +09:00
Paul Mundt
e5723e0eeb sh: Add support for SH7706/SH7710/SH7343 CPUs.
This adds support for the aforementioned CPU subtypes, and cleans
up some build issues encountered as a result.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 17:38:11 +09:00
Paul Mundt
ecd9561687 serial: Add SERIAL_SH_SCI_NR_UARTS for sh-sci.
sh-sci needs to be able to define its number of ports to
support, we do this with a config option, like most other
ports do.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 17:32:30 +09:00
Paul Mundt
9f23e7e94f sh: pselect6 and ppoll, along with signal trampoline rework.
This implements support for ppoll() and pselect6()..

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 17:27:00 +09:00
Yoshinori Sato
a2d1a5fae6 sh: __addr_ok() and other misc nommu fixups.
A few more outstanding nommu fixups..

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 17:25:07 +09:00
Yoshinori Sato
e96636ccfa sh: Various nommu fixes.
This fixes up some of the various outstanding nommu bugs on
SH.

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 17:21:02 +09:00
Paul Mundt
e7f93a355c sh: Make PAGE_OFFSET configurable.
nommu needs to be able to shift PAGE_OFFSET, so we switch it to a
non-user-visible CONFIG_PAGE_OFFSET and use that in the few places
where it matters.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 17:19:13 +09:00
Paul Mundt
adf1890b0c sh: Move voyagergx_reg.h to a more sensible place.
Other boards require this as well, so move it out of the
rts7751r2d directory.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 17:17:27 +09:00
Takashi YOSHII
4b565680d1 sh: math-emu support
This implements initial math-emu support, aimed primarily at SH-3.

Signed-off-by: Takashi YOSHII <takasi-y@ops.dti.ne.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 17:15:32 +09:00
Paul Mundt
af514ca7d2 sh: Rename rtc_get/set_time() to avoid RTC_CLASS conflict.
We have a clash with RTC_CLASS over these names, so we
change them..

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 17:11:32 +09:00
Paul Mundt
2991be7252 sh: Fixup __strnlen_user() behaviour.
Drop TIF_USERSPACE and add addr_limit to the thread_info struct.
Subsequently, use that for address checking in strnlen_user() to
ward off bogus -EFAULTs.

Make __strnlen_user() return 0 on exception, rather than -EFAULT.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 17:07:07 +09:00
Paul Mundt
0f08f33808 sh: More cosmetic cleanups and trivial fixes.
Nothing exciting here, just trivial fixes..

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 17:03:56 +09:00
Paul Mundt
959f85f8a3 sh: Consolidated SH7751/SH7780 PCI support.
This cleans up quite a lot of the PCI mess that we
currently have, and attempts to consolidate the
duplication in the SH7780 and SH7751 PCI controllers.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 16:43:28 +09:00
Paul Mundt
56e8d7b578 sh: kgdb stub cleanups.
Some kgdb cleanup. Move hexchars/highhex/lowhex to the header, so it can
be reused by sh-sci. Also drop silly ctrl_inl/outl() overloading being
done by the kgdb stub.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 16:24:55 +09:00
Andriy Skulysh
3aa770e797 sh: APM/PM support.
This adds some simple PM stubs and the basic APM interfaces,
primarily for use by hp6xx, where the existing userland
expects it.

Signed-off-by: Andriy Skulysh <askulysh@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 16:20:22 +09:00
Paul Mundt
ef48e8e349 sh: Free up some and document PTEL flags.
Drop _PAGE_SHARED/_PAGE_U0_SHARED and document Linux PTE encodings in
the PTEL value. Preserve the swap cache entry encoding semantics for
now, though it will need rework to free up _PAGE_WT from _PAGE_FILE.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 16:17:17 +09:00
Paul Mundt
00b3aa3fc9 sh: xchg()/__xchg() always_inline fixes for gcc4.
Make __xchg() a macro, so that gcc 4.0 doesn't blow up thanks to
always_inline..

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 16:05:56 +09:00
Paul Mundt
f151749440 sh: Cleanup and document register bank usage.
Initial register bank cleanup. Make SR.RB configurable, and add some
preliminary documentation on register bank usage within the kernel.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 16:01:12 +09:00
Paul Mundt
5283ecb5cc sh: Add support for R7780RP and R7780MP boards.
This adds support for the Renesas SH7780 development boards,
R7780RP and R7780MP.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 15:59:17 +09:00
Paul Mundt
d7c30c682a sh: Store Queue API rework.
Rewrite the store queue API for a per-cpu interface in the driver
model. The old miscdevice is dropped, due to TASK_SIZE limitations,
and no one was using it anyways.

Carve up and allocate store queue space with a bitmap, back sq
mapping objects with a slab cache, and let userspace worry about
its own prefetching.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 15:49:57 +09:00
Paul Mundt
373e68b547 sh: Board updates for I/O routine rework.
This updates the various boards for some of the recent I/O routine
updates.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 15:41:24 +09:00
Paul Mundt
c470662854 sh: Fixup SHMLBA definition for SH7705.
We need this set to something sensible anywhere were we have
an aliasing dcache..

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 15:29:18 +09:00
Paul Mundt
d7cdc9e8ac sh: ioremap() overhaul.
ioremap() overhaul. Add support for transparent PMB mapping, get rid of
p3_ioremap(), etc. Also drop ioremap() and iounmap() routines from the
machvec, as everyone can use the generic ioremap() API instead. For PCI
memory apertures and other special cases, use the pci_iomap() API, as
boards are already required to get the mapping right there.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 15:16:42 +09:00
Paul Mundt
26ff6c11ef sh: page table alloc cleanups and page fault optimizations.
Cleanup of page table allocators, using generic folded PMD and PUD
helpers. TLB flushing operations are moved to a more sensible spot.

The page fault handler is also optimized slightly, we no longer waste
cycles on IRQ disabling for flushing of the page from the ITLB, since
we're already under CLI protection by the initial exception handler.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 15:13:36 +09:00
Paul Mundt
0c7b1df69c sh: SH-4A Privileged Space Mapping Buffer (PMB) support.
Add support for 32-bit physical addressing through the SH-4A
Privileged Space Mapping Buffer (PMB).

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 15:08:07 +09:00
Jamie Lenehan
a09749dd86 sh: Titan board support.
Add support for the titan board.

Signed-off-by: Jamie Lenehan <lenehan@twibble.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 15:05:39 +09:00
Paul Mundt
298476220d sh: Add control register barriers.
Currently when making changes to control registers, we
typically need some time for changes to take effect (8
nops, generally).  However, for sh4a we simply need to
do an icbi..

This is a simple patch for implementing a general purpose
ctrl_barrier() which functions as a control register write
barrier. There's some additional documentation in the patch
itself, but it's pretty self explanatory.

There were also some places where we were not doing the
barrier, which didn't seem to have any adverse effects on
legacy parts, but certainly did on sh4a. It's safer to have
the barrier in place for legacy parts as well in these cases,
though this does make flush_tlb_all() more expensive (by an
order of 8 nops).  We can ifdef around the flush_tlb_all()
case for now if it's clear that all legacy parts won't have
a problem with this.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 14:57:44 +09:00
kogiidena
94c0fa520c sh: landisk board support.
This adds support for the I-O DATA Landisk.

Signed-off-by: kogiidena <kogiidena@eggplant.ddo.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 14:53:35 +09:00
Paul Mundt
634bf4f69b sh: Fix libata build.
Drop virt_to_bus() from sg_dma_address() so libata builds.
While we're at it, move sg_dma_address() and sg_dma_len()
from pci.h to scatterlist.h.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 14:48:09 +09:00
Paul Mundt
8b395265f8 sh: Fix fatal oops in copy_user_page() on sh4a (SH7780).
We had a pretty interesting oops happening, where copy_user_page()
was down()'ing p3map_sem[] with a bogus offset (particularly, an
offset that hadn't been initialized with sema_init(), due to the
mismatch between cpu_data->dcache.n_aliases and what was assumed
based off of the old CACHE_ALIAS value).

Luckily, spinlock debugging caught this for us, and so we drop
the old hardcoded CACHE_ALIAS for sh4 completely and rely on the
run-time probed cpu_data->dcache.alias_mask. This in turn gets
the p3map_sem[] index right, and everything works again.

While we're at it, also convert to 4-level page tables..

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 14:38:02 +09:00
Paul Mundt
75c92acdd5 sh: Wire up new syscalls.
The syscall table has lagged behind a bit, wire up the new ones..

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 14:36:44 +09:00
Alexey Dobriyan
ef9a1d4c0c sh: remove cpu_online() definition from <asm/smp.h>
It's defined in <linux/cpumask.h> and log is horribly flooded by
"redefined" messages.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 14:32:57 +09:00
Paul Mundt
5b19c9081f sh: Support for SH7770/SH7780 CPU subtypes.
Merge support for SH7770 and SH7780 SH-4A subtypes.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 14:31:40 +09:00
Paul Mundt
a80fd21e52 sh: earlyprintk= support and cleanups.
Allow multiple early printk consoles via earlyprintk=.

With this change earlyprintk is no longer enabled by default,
it must be specified on the kernel command line. Optionally
with ,keep to prevent unreg by tty_io.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 14:26:53 +09:00
Paul Mundt
e86d6b66f5 sh: prefetch()/prefetchw() support.
SH-2/3/4 are able to prefetch, add support for it..

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 14:20:54 +09:00
Richard Curnow
b638d0b921 sh: Optimized cache handling for SH-4/SH-4A caches.
This reworks some of the SH-4 cache handling code to more easily
accomodate newer-style caches (particularly for the > direct-mapped
case), as well as optimizing some of the old code.

Signed-off-by: Richard Curnow <richard.curnow@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 14:09:26 +09:00
Paul Mundt
fdfc74f9fc sh: Support for SH-4A memory barriers.
SH-4A supports 'synco' as a barrier, sprinkle it around
the cache ops as necessary..

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 14:05:52 +09:00
Paul Mundt
e8fb67f8e0 sh: HS7751RVoIP board updates.
Various cleanups for HS7751RVoIP. Mostly just getting
rid of the old mach.c and splitting codec configuration
in to its own Kconfig.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 13:56:28 +09:00
Paul Mundt
6d75e650f1 sh: Move hd64461.h to a more sensible location.
With the I/O rework for hd64461 we're down to a single header,
so move it by itself and get rid of the directory.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 13:42:57 +09:00
Paul Mundt
d95fb13c96 sh: Fixup TMU_TOCR definition for SH7300.
SH7300 has a different TMU_TOCR, make the TMU code work again.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 13:30:08 +09:00
Paul Mundt
3f787fe2e0 sh: hugetlb updates.
For some of the larger sizes we permitted spanning pages
across several PTEs, but this turned out to not be generally
useful. This reverts the sh hugetlbpage interface to something
more sensible using huge pages at single PTE granularity.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 13:11:57 +09:00
Paul Mundt
e4c2cfee5d sh: Various cosmetic cleanups.
We had quite a bit of whitespace damage, clean most of it up..

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Arthur Othieno <a.othieno@bluewin.ch>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 12:31:01 +09:00
Tom Rini
e4e3b5ccd7 sh: Add a simple cmpxchg().
We didn't have one of these before, a simple implementation
borrowed from MIPS as well as the __HAVE_ARCH_CMPXCHG bits.

Signed-off-by: Tom Rini <trini@kernel.crashing.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 11:28:20 +09:00
Paul Mundt
0c91c1a701 sh: Move smc37c93x.h for SystemH board use.
SystemH needs this header as well, not just 770x SE.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 11:16:20 +09:00
Dave McCracken
46a82b2d55 [PATCH] Standardize pxx_page macros
One of the changes necessary for shared page tables is to standardize the
pxx_page macros.  pte_page and pmd_page have always returned the struct
page associated with their entry, while pte_page_kernel and pmd_page_kernel
have returned the kernel virtual address.  pud_page and pgd_page, on the
other hand, return the kernel virtual address.

Shared page tables needs pud_page and pgd_page to return the actual page
structures.  There are very few actual users of these functions, so it is
simple to standardize their usage.

Since this is basic cleanup, I am submitting these changes as a standalone
patch.  Per Hugh Dickins' comments about it, I am also changing the
pxx_page_kernel macros to pxx_page_vaddr to clarify their meaning.

Signed-off-by: Dave McCracken <dmccr@us.ibm.com>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 08:48:51 -07:00
Paul Mundt
b5233d0704 Fix 'make headers_check' on sh
Cleanup for user headers, as noted:

asm-sh/page.h requires asm-generic/memory_model.h, which does not exist in exported headers
asm-sh/ptrace.h requires asm/ubc.h, which does not exist in exported headers

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-21 08:36:50 +01:00
Alexey Dobriyan
67bb2c692c [PATCH] sh: fix FPN_START typo
Not that it passes allmodconfig without it...

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp>
Cc: Mark Haverkamp <markh@osdl.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-08 10:22:50 -07:00
Steven Rostedt
52393ccc0a [PATCH] remove set_wmb - arch removal
set_wmb should not be used in the kernel because it just confuses the
code more and has no benefit.  Since it is not currently used in the
kernel this patch removes it so that new code does not include it.

All archs define set_wmb(var, value) to do { var = value; wmb(); }
while(0) except ia64 and sparc which use a mb() instead.  But this is
still moot since it is not used anyway.

Hasn't been tested on any archs but x86 and x86_64 (and only compiled
tested)

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-14 21:56:14 -07:00
Chase Venters
f6dc8c5b8e [PATCH] Make cpu_relax() imply barrier() on all arches
During the recent discussion of taking 'volatile' off of the spinlock, I
noticed that while most arches #define cpu_relax() such that it implies
barrier(), some arches define cpu_relax() to be empty.

This patch changes the definition of cpu_relax() for frv, h8300, m68knommu,
sh, sh64, v850 and xtensa from an empty while(0) to the compiler barrier().

Signed-off-by: Chase Venters <chase.venters@clientec.com>
Acked-by: Arjan van de Ven <arjan@Linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-12 12:56:45 -07:00
Linus Torvalds
6fa0cb1141 Merge git://git.infradead.org/hdrinstall-2.6
* git://git.infradead.org/hdrinstall-2.6:
  Remove export of include/linux/isdn/tpam.h
  Remove <linux/i2c-id.h> and <linux/i2c-algo-ite.h> from userspace export
  Restrict headers exported to userspace for SPARC and SPARC64
  Add empty Kbuild files for 'make headers_install' in remaining arches.
  Add Kbuild file for Alpha 'make headers_install'
  Add Kbuild file for SPARC 'make headers_install'
  Add Kbuild file for IA64 'make headers_install'
  Add Kbuild file for S390 'make headers_install'
  Add Kbuild file for i386 'make headers_install'
  Add Kbuild file for x86_64 'make headers_install'
  Add Kbuild file for PowerPC 'make headers_install'
  Add generic Kbuild files for 'make headers_install'
  Basic implementation of 'make headers_check'
  Basic implementation of 'make headers_install'
2006-07-04 12:55:45 -07:00
Ingo Molnar
36c8b58689 [PATCH] sched: cleanup, remove task_t, convert to struct task_struct
cleanup: remove task_t and convert all the uses to struct task_struct. I
introduced it for the scheduler anno and it was a mistake.

Conversion was mostly scripted, the result was reviewed and all
secondary whitespace and style impact (if any) was fixed up by hand.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 15:27:11 -07:00
Ingo Molnar
61f4c3d6db [PATCH] lockdep: remove RWSEM_DEBUG remnants
RWSEM_DEBUG used to be a printk based 'tracing' facility, probably used for
very early prototypes of the rwsem code.  Remove it.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 15:27:01 -07:00
Thomas Gleixner
6d20819f80 [PATCH] irq-flags: SH: Use the new IRQF_ constants
Use the new IRQF_ constants and remove the SA_INTERRUPT define

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02 13:58:48 -07:00
Catherine Zhang
877ce7c1b3 [AF_UNIX]: Datagram getpeersec
This patch implements an API whereby an application can determine the
label of its peer's Unix datagram sockets via the auxiliary data mechanism of
recvmsg.

Patch purpose:

This patch enables a security-aware application to retrieve the
security context of the peer of a Unix datagram socket.  The application
can then use this security context to determine the security context for
processing on behalf of the peer who sent the packet.

Patch design and implementation:

The design and implementation is very similar to the UDP case for INET
sockets.  Basically we build upon the existing Unix domain socket API for
retrieving user credentials.  Linux offers the API for obtaining user
credentials via ancillary messages (i.e., out of band/control messages
that are bundled together with a normal message).  To retrieve the security
context, the application first indicates to the kernel such desire by
setting the SO_PASSSEC option via getsockopt.  Then the application
retrieves the security context using the auxiliary data mechanism.

An example server application for Unix datagram socket should look like this:

toggle = 1;
toggle_len = sizeof(toggle);

setsockopt(sockfd, SOL_SOCKET, SO_PASSSEC, &toggle, &toggle_len);
recvmsg(sockfd, &msg_hdr, 0);
if (msg_hdr.msg_controllen > sizeof(struct cmsghdr)) {
    cmsg_hdr = CMSG_FIRSTHDR(&msg_hdr);
    if (cmsg_hdr->cmsg_len <= CMSG_LEN(sizeof(scontext)) &&
        cmsg_hdr->cmsg_level == SOL_SOCKET &&
        cmsg_hdr->cmsg_type == SCM_SECURITY) {
        memcpy(&scontext, CMSG_DATA(cmsg_hdr), sizeof(scontext));
    }
}

sock_setsockopt is enhanced with a new socket option SOCK_PASSSEC to allow
a server socket to receive security context of the peer.

Testing:

We have tested the patch by setting up Unix datagram client and server
applications.  We verified that the server can retrieve the security context
using the auxiliary data mechanism of recvmsg.

Signed-off-by: Catherine Zhang <cxzhang@watson.ibm.com>
Acked-by: Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-29 16:58:06 -07:00
Ingo Molnar
c0ad90a32f [PATCH] genirq: add ->retrigger() irq op to consolidate hw_irq_resend()
Add ->retrigger() irq op to consolidate hw_irq_resend() implementations.
(Most architectures had it defined to NOP anyway.)

NOTE: ia64 needs testing. i386 and x86_64 tested.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-29 10:26:23 -07:00
Matt Mackall
afedfd016a [PATCH] random: remove SA_SAMPLE_RANDOM from floppy driver
The floppy driver is already calling add_disk_randomness as it should, so this
was redundant.

Signed-off-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25 10:01:00 -07:00
David Woodhouse
ef4d04b87d Add empty Kbuild files for 'make headers_install' in remaining arches.
These include nothing more than the basic set of files listed in
asm-generic/Kbuild.asm. Any extra arch-specific files will need to be
added.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-06-18 12:58:53 +01:00
David Woodhouse
5614253686 Remove unneeded _syscallX macros from user view in asm-*/unistd.h
These aren't needed by glibc or klibc, and they're broken in some cases
anyway. The uClibc folks are apparently switching over to stop using
them too (now that we agreed that they should be dropped, at least).

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-04-29 01:51:47 +01:00
David Woodhouse
62c4f0a2d5 Don't include linux/config.h from anywhere else in include/
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-04-26 12:56:16 +01:00
Andrew Morton
491d4bed80 [PATCH] sys_kexec_load() naming fixups
__NR_sys_kexec_load should be __NR_kexec_load.  Mainly affects users of the
_syscallN() macros, and glibc is already checking for __NR_kexec_load.

Cc: Ulrich Drepper <drepper@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11 06:18:42 -07:00
Yasunori Goto
c80d79d746 [PATCH] Configurable NODES_SHIFT
Current implementations define NODES_SHIFT in include/asm-xxx/numnodes.h for
each arch.  Its definition is sometimes configurable.  Indeed, ia64 defines 5
NODES_SHIFT values in the current git tree.  But it looks a bit messy.

SGI-SN2(ia64) system requires 1024 nodes, and the number of nodes already has
been changeable by config.  Suitable node's number may be changed in the
future even if it is other architecture.  So, I wrote configurable node's
number.

This patch set defines just default value for each arch which needs multi
nodes except ia64.  But, it is easy to change to configurable if necessary.

On ia64 the number of nodes can be already configured in generic ia64 and SN2
config.  But, NODES_SHIFT is defined for DIG64 and HP'S machine too.  So, I
changed it so that all platforms can be configured via CONFIG_NODES_SHIFT.  It
would be simpler.

See also: http://marc.theaimsgroup.com/?l=linux-kernel&m=114358010523896&w=2

Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Andi Kleen <ak@muc.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11 06:18:39 -07:00
Alexey Dobriyan
7f927fcc2f [PATCH] Typo fixes
Fix a lot of typos.  Eyeballed by jmc@ in OpenBSD.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28 09:16:08 -08:00
KAMEZAWA Hiroyuki
104b8deaa5 [PATCH] unify pfn_to_page: sh pfn_to_page
sh can use generic funcs.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-27 08:44:46 -08:00
Akinobu Mita
6ecf66ae49 [PATCH] bitops: sh: make thread_info.flags an unsigned long
The test_bit() routines are defined to work on a pointer to unsigned long.
But thread_info.flags is __u32 (unsigned int) on sh and it is passed to flag
set/clear/test wrappers in include/linux/thread_info.h.  So the compiler will
print warnings.

This patch changes to unsigned long instead.

Signed-off-by: Akinobu Mita <mita@miraclelinux.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26 08:57:15 -08:00
Akinobu Mita
e2268c7129 [PATCH] bitops: sh: use generic bitops
- remove __{,test_and_}{set,clear,change}_bit() and test_bit()
- remove find_{next,first}{,_zero}_bit()
- remove generic_ffs()
- remove generic_hweight{32,16,8}()
- remove sched_find_first_bit()
- remove ext2_{set,clear,test,find_first_zero,find_next_zero}_bit()
- remove ext2_{set,clear}_bit_atomic()
- remove minix_{test,set,test_and_clear,test,find_first_zero}_bit()
- remove generic_fls()
- remove generic_fls64()

Signed-off-by: Akinobu Mita <mita@miraclelinux.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26 08:57:14 -08:00
Akinobu Mita
67b0ad574b [PATCH] bitops: use non atomic operations for minix_*_bit() and ext2_*_bit()
Bitmap functions for the minix filesystem and the ext2 filesystem except
ext2_set_bit_atomic() and ext2_clear_bit_atomic() do not require the atomic
guarantees.

But these are defined by using atomic bit operations on several architectures.
 (cris, frv, h8300, ia64, m32r, m68k, m68knommu, mips, s390, sh, sh64, sparc,
sparc64, v850, and xtensa)

This patch switches to non atomic bit operation.

Signed-off-by: Akinobu Mita <mita@miraclelinux.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26 08:57:10 -08:00
Takashi Sato
a0f62ac636 [PATCH] 2TB files: add blkcnt_t
Add blkcnt_t as the type of inode.i_blocks.  This enables you to make the size
of blkcnt_t either 4 bytes or 8 bytes on 32 bits architecture with CONFIG_LSF.

- CONFIG_LSF
  Add new configuration parameter.
- blkcnt_t
  On h8300, i386, mips, powerpc, s390 and sh that define sector_t,
  blkcnt_t is defined as u64 if CONFIG_LSF is enabled; otherwise it is
  defined as unsigned long.
  On other architectures, it is defined as unsigned long.
- inode.i_blocks
  Change the type from sector_t to blkcnt_t.

Signed-off-by: Takashi Sato <sho@tnes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26 08:57:00 -08:00
Takashi Sato
abcb6c9fd1 [PATCH] 2TB files: st_blocks is invalid when calling stat64
This patch series fixes the following problems on 32 bits architecture.

o stat64 returns the lower 32 bits of blocks, although userland st_blocks
  has 64 bits, because i_blocks has only 32 bits.  The ioctl with FIOQSIZE has
  the same problem.

o As Dave Kleikamp said, making >2TB file on JFS results in writing an
  invalid block number to disk inode.  The cause is the same as above too.

o In generic quota code dquot_transfer(), the file usage is calculated from
  i_blocks via inode_get_bytes().  If the file is over 2TB, the change of
  usage is less than expected.  The cause is the same as above too.

o As Trond Myklebust said, statfs64's entries related to blocks are invalid
  on statfs64 for a network filesystem which has more than 2^32-1 blocks with
  CONFIG_LBD disabled.  [PATCH 3/3]

We made patches to fix problems that occur when handling a large filesystem
and a large file.  It was discussed on the mails titled "stat64 for over 2TB
file returned invalid st_blocks".

Signed-off-by: Takashi Sato <sho@tnes.nec.co.jp>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Jan Kara <jack@ucw.cz>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26 08:57:00 -08:00
Davide Libenzi
f348d70a32 [PATCH] POLLRDHUP/EPOLLRDHUP handling for half-closed devices notifications
Implement the half-closed devices notifiation, by adding a new POLLRDHUP
(and its alias EPOLLRDHUP) bit to the existing poll/select sets.  Since the
existing POLLHUP handling, that does not report correctly half-closed
devices, was feared to be changed, this implementation leaves the current
POLLHUP reporting unchanged and simply add a new bit that is set in the few
places where it makes sense.  The same thing was discussed and conceptually
agreed quite some time ago:

http://lkml.org/lkml/2003/7/12/116

Since this new event bit is added to the existing Linux poll infrastruture,
even the existing poll/select system calls will be able to use it.  As far
as the existing POLLHUP handling, the patch leaves it as is.  The
pollrdhup-2.6.16.rc5-0.10.diff defines the POLLRDHUP for all the existing
archs and sets the bit in the six relevant files.  The other attached diff
is the simple change required to sys/epoll.h to add the EPOLLRDHUP
definition.

There is "a stupid program" to test POLLRDHUP delivery here:

 http://www.xmailserver.org/pollrdhup-test.c

It tests poll(2), but since the delivery is same epoll(2) will work equally.

Signed-off-by: Davide Libenzi <davidel@xmailserver.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Michael Kerrisk <mtk-manpages@gmx.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25 08:22:56 -08:00
Al Viro
57f3ebccaa [PATCH] remove ISA legacy functions: remove the helpers
unused isa_...() helpers removed.

Adrian Bunk:
The asm-sh part was rediffed due to unrelated changes.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24 07:33:19 -08:00
Michael S. Tsirkin
5f6164f309 [PATCH] add asm-generic/mman.h
Make new MADV_REMOVE, MADV_DONTFORK, MADV_DOFORK consistent across all
arches.  The idea is to make it possible to use them portably even before
distros include them in libc headers.

Move common flags to asm-generic/mman.h

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Cc: Roland Dreier <rolandd@cisco.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-15 15:32:22 -08:00
Michael S. Tsirkin
f822566165 [PATCH] madvise MADV_DONTFORK/MADV_DOFORK
Currently, copy-on-write may change the physical address of a page even if the
user requested that the page is pinned in memory (either by mlock or by
get_user_pages).  This happens if the process forks meanwhile, and the parent
writes to that page.  As a result, the page is orphaned: in case of
get_user_pages, the application will never see any data hardware DMA's into
this page after the COW.  In case of mlock'd memory, the parent is not getting
the realtime/security benefits of mlock.

In particular, this affects the Infiniband modules which do DMA from and into
user pages all the time.

This patch adds madvise options to control whether memory range is inherited
across fork.  Useful e.g.  for when hardware is doing DMA from/into these
pages.  Could also be useful to an application wanting to speed up its forks
by cutting large areas out of consideration.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Acked-by: Hugh Dickins <hugh@veritas.com>
Cc: Michael Kerrisk <mtk-manpages@gmx.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-14 16:09:34 -08:00
Paul Mundt
87f55e67dc [PATCH] sh/sh64: Fix bogus TIOCGICOUNT definitions
As reported by Russell King, sh and sh64 currently have bogus definitions for
TIOCGICOUNT, particularly referencing a kernel only structure.  Switch to
using a sensible ioctl value.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01 08:53:20 -08:00
Paul Mundt
37cc794378 [PATCH] sh: convert voyagergx to platform device, drop sh-bus
Trivial patch updating the voyagergx cchip code to reference a platform device
instead, now that the dma mask is taken care of.  Given this, there's no
longer any reason to drag around the SH-bus code, so kill that off entirely.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01 08:53:20 -08:00
Paul Mundt
8d27e08191 [PATCH] sh: drop maskpos from make_ipr_irq(), remove duplicate irq definitions
Clean up some of the subtype IRQ definitions for IPR IRQ, and consolidate the
make_ipr_irq() definitions by dropping maskpos.  SH-4A was the only thing
interested in the maskpos, and this should be handled through INTC2 rather
than IPR.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01 08:53:20 -08:00
Paul Mundt
de02797aa7 [PATCH] sh: Cleanup struct sh_cpuinfo for clock framework changes
Now that the clock framework changes have been integrated, the manual clock
accounting that was done in sh_cpuinfo can be dropped.

Also correct a bug with running past the end of the CPU flags when there's a
mismatch between the added flags and printed ones.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01 08:53:19 -08:00
Paul Mundt
091904ae5f [PATCH] sh: Move TRA/EXPEVT/INTEVT definitions for reuse
Currently entry.S is home to these definitions, so we move them somewhere more
sensible.  IPR IRQ handling depends on being to read from INTEVT.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01 08:53:19 -08:00
Paul Mundt
740172947b [PATCH] sh: SH4-202 microdev updates
A few trivial updates for the microdev board support code:

	- Update for __IO_PREFIX changes.
	- Consolidate headers into a single microdev.h.
	- Update the microdev_defconfig.
	- Add init values for the S1D13806 used by s1d13xxxfb.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01 08:53:19 -08:00
Paul Mundt
aa01666df3 [PATCH] sh: Simple timer framework
This builds on some of the clock framework code to support a simple system
timer interface.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Cc: john stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-16 23:15:28 -08:00
Paul Mundt
36ddf31b68 [PATCH] sh: Simplistic clock framework
This adds a relatively simplistic clock framework for sh.  The initial goal
behind this is to clean up the arch/sh/kernel/time.c mess and to get the CPU
subtype-specific frequency setting and calculation code moved somewhere more
sensible.

This only deals with the core clocks at the moment, though it's trivial for
other drivers to define their own clocks as desired.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Cc: john stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-16 23:15:28 -08:00