Commit Graph

148 Commits

Author SHA1 Message Date
Olav Kongas
0be930c546 [PATCH] USB: isp116x-hcd: replace mdelay() by msleep()
Replace mdelay() by msleep() in bus_suspend(); the rest of the system will
gain 7ms. The related code is reorganized to minimize the number of
locking/unlocking calls.

The last hunk of the patch is the formatting change by Lindent.

Signed-off-by: Olav Kongas <ok@artecdesign.ee>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31 17:23:42 -08:00
Alan Stern
630aa3cfd5 [PATCH] USB: UHCI: No FSBR until device is configured
Some USB devices don't enumerate well with FSBR turned on.  This patch
keeps devices on the low-speed part of the schedule (which doesn't use
FSBR) until they have been fully configured.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31 17:23:41 -08:00
Clemens Ladisch
0c7346229c [PATCH] USB: EHCI, another full speed iso fix
This patch adds a reinitializion for the uf variable that got modified
by the preceding start-split bandwidth check.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31 17:23:41 -08:00
Andrew Morton
b6daf7f508 [PATCH] USB: fix ehci early handoff issues warning
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31 17:23:36 -08:00
David Brownell
401feafa62 [PATCH] USB: fix EHCI early handoff issues
This moves the previously widely-used ehci-pci.c BIOS handoff
code into the pci-quirks.c file, replacing the less widely used
"early handoff" version that seems to cause problems lately.

One notable change:  the "early handoff" version always enabled
an SMI IRQ ... and did so even if the pre-Linux code said it was
not using EHCI (and not expecting EHCI SMIs).  Looks like a goof
in a workaround for some unknown BIOS version.

This merged version only forcibly enables those IRQs when pre-Linux
code says it's using EHCI.  And now it always forces them off "just
in case".

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31 17:23:35 -08:00
Jesper Juhl
b3c29d85bf Small fixups to the EHCI Kconfig help text
Here's a small patch with a few tiny fixups for the EHCI Kconfig help
text. Please consider applying.

Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-01-10 00:35:22 +01:00
Tim Schmielau
de25968cc8 [PATCH] fix more missing includes
Include fixes for 2.6.14-git11.  Should allow to remove sched.h from
module.h on i386, x86_64, arm, ia64, ppc, ppc64, and s390.  Probably more
to come since I haven't yet checked the other archs.

Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 20:13:45 -08:00
Russell King
f8ce25476d [ARM] Move asm/hardware/clock.h to linux/clk.h
This is needs to be visible to other architectures using the AMBA
bus and peripherals.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-07 16:15:52 +00:00
Russell King
123656d4cc Merge with Linus' kernel. 2006-01-07 14:40:05 +00:00
Dominik Brodowski
f8cfa618dc [PATCH] pcmcia: unify attach, EVENT_CARD_INSERTION handlers into one probe callback
Unify the EVENT_CARD_INSERTION and "attach" callbacks to one unified
probe() callback. As all in-kernel drivers are changed to this new
callback, there will be no temporary backwards-compatibility. Inside a
probe() function, each driver _must_ set struct pcmcia_device
*p_dev->instance and instance->handle correctly.

With these patches, the basic driver interface for 16-bit PCMCIA drivers
now has the classic four callbacks known also from other buses:

        int (*probe)            (struct pcmcia_device *dev);
        void (*remove)          (struct pcmcia_device *dev);

        int (*suspend)          (struct pcmcia_device *dev);
        int (*resume)           (struct pcmcia_device *dev);

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-01-06 00:03:24 +01:00
Dominik Brodowski
b463581154 [PATCH] pcmcia: remove dev_list from drivers
The linked list of devices managed by each PCMCIA driver is, in very most
cases, unused. Therefore, remove it from many drivers.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-01-06 00:03:20 +01:00
Dominik Brodowski
cc3b4866be [PATCH] pcmcia: unify detach, REMOVAL_EVENT handlers into one remove callback
Unify the "detach" and REMOVAL_EVENT handlers to one "remove" function.
Old functionality is preserved, for the moment.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-01-06 00:03:10 +01:00
Dominik Brodowski
98e4c28b7e [PATCH] pcmcia: new suspend core
Move the suspend and resume methods out of the event handler, and into
special functions. Also use these functions for pre- and post-reset, as
almost all drivers already do, and the remaining ones can easily be
converted.

Bugfix to include/pcmcia/ds.c
Signed-off-by: Andrew Morton <akpm@osdl.org>

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-01-05 23:59:02 +01:00
Linus Torvalds
db9edfd7e3 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6
Trivial manual merge fixup for usb_find_interface clashes.
2006-01-04 18:44:12 -08:00
Kay Sievers
312c004d36 [PATCH] driver core: replace "hotplug" by "uevent"
Leave the overloaded "hotplug" word to susbsystems which are handling
real devices. The driver core does not "plug" anything, it just exports
the state to userspace and generates events.

Signed-off-by: Kay Sievers <kay.sievers@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04 16:18:08 -08:00
Daniel Marjamki
6b495f4c5a [PATCH] USB: isp116x-hcd.c: Removed unused variable
Removed unused variable

Signed-off-by: Daniel Marjamki <daniel.marjamaki@comhem.se>
Signed-off-by: Olav Kongas <ok@artecdesign.ee>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04 13:51:43 -08:00
Alan Stern
687f5f3428 [PATCH] USB: UHCI: edit some comments
This patch (as615b) edits a large number of comments in the uhci-hcd code,
mainly removing excess apostrophes.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04 13:51:41 -08:00
Alan Stern
fa3465689f [PATCH] USB: UHCI: change uhci_explen macro
This patch (as616) changed the uhci_explen macro in uhci-hcd.h so that
it now accepts the desired length, rather than length - 1 with special
handling for 0.  This also fixes a minor bug that would show up only
when a driver submits a 0-length bulk URB.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04 13:51:41 -08:00
Richard Purdie
a5e36d2089 [PATCH] USB: Correct ohci-pxa27x suspend/resume struct confusion
The device data in ohci-pxa27x is a struct hcd, not a struct ohci_hcd.
This correct the suspend/resume calls to account for this and adds some
code to invalidate the platform data when the module is removed.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04 13:51:40 -08:00
Arjan van de Ven
4c4c9432a6 [PATCH] USB: mark various usb tables const
patch below marks various USB tables and variables as const so that they
end up in .rodata section and don't cacheline share with things that get
written to. For the non-array variables it also allows gcc to optimize
more.

Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04 13:51:40 -08:00
Olav Kongas
717f736d93 [PATCH] USB: isp116x-hcd: minor cleanup
When going to suspend, there's no point in setting HC state in
host controller driver as USB core takes care of this.

Signed-off-by: Olav Kongas <ok@artecdesign.ee>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04 13:48:35 -08:00
Alan Stern
9ad3d6ccf5 [PATCH] USB: Remove USB private semaphore
This patch (as605) removes the private udev->serialize semaphore,
relying instead on the locking provided by the embedded struct device's
semaphore.  The changes are confined to the core, except that the
usb_trylock_device routine now uses the return convention of
down_trylock rather than down_read_trylock (they return opposite values
for no good reason).

A couple of other associated changes are included as well:

	Now that we aren't concerned about HCDs that avoid using the
	hcd glue layer, usb_disconnect no longer needs to acquire the
	usb_bus_lock -- that can be done by usb_remove_hcd where it
	belongs.

	Devices aren't locked over the same scope of code in
	usb_new_device and hub_port_connect_change as they used to be.
	This shouldn't cause any trouble.

Along with the preceding driver core patch, this needs a lot of testing.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04 13:48:34 -08:00
Alan Stern
1c50c317e2 [PATCH] USB: central handling for host controllers that were reset during suspend/resume
This patch (as515b) adds a routine to usbcore to simplify handling of
host controllers that lost power or were reset during suspend/resume.
The new core routine marks all the child devices of the root hub as
NOTATTACHED and tells khubd to disconnect the device structures as soon
as possible.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04 13:48:31 -08:00
David Brownell
c9a50cc931 [PATCH] USB: hcd uses EXTRA_CFLAGS for -DDEBUG
This modifies the HCD builds to automatically "-DDEBUG" if
CONFIG_USB_DEBUG is selected.  It's just a minor source code cleanup,
guaranteeing consistency.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04 13:48:30 -08:00
David Brownell
704aa0b7a9 [PATCH] USB: wakeup flag updates (3/3) isp116x-hcd
This makes the ISP116x HCD use the driver model wakeup flags for its
controller, not the flags in the HCD glue (which will be removed).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04 13:48:30 -08:00
David Brownell
baefbc39d8 [PATCH] USB: wakeup flag updates (2/3) uhci-hcd
This makes UHCI stop using the HCD glue wakeup flags to report whether
the controller can wake the system.  The existing code was wrong anyway;
having a PCI PM capability doesn't imply it reports PME# is supported.

I skimmed Intel's ICH7 datasheet and that basically says the wakeup
signaling gets routed only through ACPI registers.  (On the other hand,
many VIA chips provide the PCI PM capabilities...)  I think that doing
this correctly with UHCI is going to require the ACPI folk to associate
the /proc/acpi/wakeup identifiers (and wakeup enable/disable flags)
with the relevant /sys/devices/pci*/...  devices.

From: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04 13:48:30 -08:00
David Brownell
0c8624f91d [PATCH] USB: wakeup flag updates (1/3) sl811-hcd
This makes the SL811 HCD use the driver model wakeup flags for its
controller, not the flags in the HCD glue (which will be removed).

From: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

 drivers/usb/host/sl811-hcd.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
2006-01-04 13:48:30 -08:00
David Brownell
d97cc2f2e9 [PATCH] USB: ehci fix driver model wakeup flags
On some systems, EHCI seems to be getting IRQs too early during driver
setup ... before the root hub is allocated, in particular, making trouble
for any code chasing down root hub pointers!  In this case, it seems to
be safe to just ignore the root hub setting.  Thanks to Rafael J. Wysocki
for getting this properly tested.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04 13:48:30 -08:00
David Brownell
2c1c3c4cd5 [PATCH] USB: EHCI updates (4/4) driver model wakeup flags
This teaches the EHCI driver to use the new driver model wakeup flags,
replacing the similar ones in the HCD glue.  It also adds a workaround
for the current glitch whereby PCI init doesn't init the wakeup flags
from the PCI PM capabilities.  (EHCI controllers don't worry about
legacy mode; the PCI PM capability would always do the job.)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04 13:48:30 -08:00
Alan Stern
6912354a89 [PATCH] USB: EHCI: fix conflation of buf == 0 with len == 0
When the ehci-hcd driver prepares a control URB, it tests for a
zero-length data stage by looking at the transfer_dma value instead of
the transfer_buffer_length.  (In fact it does this even for non-control
URBs, which is an additional aspect of the same bug.)

However, under certain circumstances it's possible for transfer_dma to
be 0 while transfer_buffer_length is non-zero.  This can happen when a
freshly allocated page (mapped to address 0 and marked Copy-On-Write,
but never written to) is used as the source buffer for an OUT transfer.
This patch (as598) fixes the problem.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04 13:48:29 -08:00
Olav Kongas
959eea2191 [PATCH] USB: isp116x-hcd: cleanup
The attached patch makes a cleanup of isp116x-hcd. Most of the volume of
the patch comes from 2 sources: moving the code around to get rid of a
few function prototypes and reworking register dumping functions/macros.
Among other things, switched over from using procfs to debugfs.

Cleanup. The following changes were made:

- Rework register dumping code so it can be used for dumping
  to both syslog and debugfs.
- Switch from procfs to debugfs..
- Die gracefully on Unrecoverable Error interrupt.
- Fix memory leak in isp116x_urb_enqueue(), if HC happens to
  die in a narrow time window.
- Fix a 'sparce' warning (unnecessary cast).
- Report Devices Removable for root hub ports by default
  (was Devices Permanently Attached).
- Move bus suspend/resume functions down in code to get rid of
  a few function prototypes.
- A number of one-line cleanups.
- Add an entry to MAINTAINERS.

Signed-off-by: Olav Kongas <ok@artecdesign.ee>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

 MAINTAINERS                    |    6
 drivers/usb/host/isp116x-hcd.c |  429 ++++++++++++++++-------------------------
 drivers/usb/host/isp116x.h     |   83 +++++--
 3 files changed, 230 insertions(+), 288 deletions(-)
2006-01-04 13:48:29 -08:00
Olav Kongas
535488fcf1 [PATCH] USB: isp116x-hcd: support reiniting HC on resume
Until now the isp116x-hcd had no support to reinitialize the HC on
resume, if the controller lost its state during suspend. This patch,
generated against your Oct 26 git tree, adds that support. The patch is
basically the same as the one tested by Ivan Kalatchev, who reported the
problem, on 2.6.13.

Please apply,

Support reinitializing the isp116x host controller from scratch on
resume, if the controller has lost its state.

Signed-off-by: Olav Kongas <ok@artecdesign.ee>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04 13:48:29 -08:00
Richard Purdie
2e1dcc1600 [PATCH] USB: Add pxa27x OHCI PM functions
Add power management functions for the pxa27x USB OHCI host controller.
This is a totally rewritten version of the patch by Nicolas Pitre and
Todd Poynor which accounts for recent USB changes.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04 13:48:29 -08:00
Richard Purdie
81f280e22f [PATCH] USB: pxa27x OHCI - Separate platform code from main driver
To allow multiple platforms to use the PXA27x OHCI driver, the platform
code needs to be moved into the board specific files in
arch/arm/mach-pxa. This patch does this for mainstone and adds
preliminary hooks to allow other boards to use the driver.

This has been compile tested for mainstone and successfully run on Spitz
(Sharp Zaurus SL-C3000) with the addition of an appropriate board
support file.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Nicolas Pitre <nico@cam.org>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04 13:48:28 -08:00
Russell King
a8d3584a2d [ARM] Remove clk_use()/clk_unuse()
It seems that clk_use() and clk_unuse() are additional complexity
which isn't required anymore.  Remove them from the clock framework
to avoid the additional confusion which they cause, and update all
ARM machine types except for OMAP.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-03 18:41:37 +00:00
Alan Stern
42245e65f3 [PATCH] UHCI: add missing memory barriers
This patch (as617) adds a couple of memory barriers that Ben H. forgot in
his recent suspend/resume fix.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-16 11:25:25 -08:00
David Brownell
8926bfa746 [PATCH] USB: ehci fixups
Rename the EHCI "reset" routine so it better matches what it does (setup);
and move the one-time data structure setup earlier, before doing anything
that implicitly relies on it having been completed already.

From: David Brownell <david-b@pacbell.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-29 21:39:23 -08:00
Benjamin Herrenschmidt
8de9840265 [PATCH] USB: Fix USB suspend/resume crasher (#2)
This patch closes the IRQ race and makes various other OHCI & EHCI code
path safer vs. suspend/resume.
I've been able to (finally !) successfully suspend and resume various
Mac models, with or without USB mouse plugged, or plugging while asleep,
or unplugging while asleep etc... all without a crash.

Alan, please verify the UHCI bit I did, I only verified that it builds.
It's very simple so I wouldn't expect any issue there. If you aren't
confident, then just drop the hunks that change uhci-hcd.c

I also made the patch a little bit more "safer" by making sure the store
to the interrupt register that disables interrupts is not posted before
I set the flag and drop the spinlock.

Without this patch, you cannot reliably sleep/wakeup any recent Mac, and
I suspect PCs have some more sneaky issues too (they don't frankly crash
with machine checks because x86 tend to silently swallow PCI errors but
that won't last afaik, at least PCI Express will blow up in those
situations, but the USB code may still misbehave).

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-29 21:39:23 -08:00
David Brownell
21b1861fb2 [PATCH] USB: ohci, move ppc asic tweaks nearer pci
This should fix a suspend/resume issues that appear with OHCI on some
PPC hardware.  The PCI layer should doesn't have the hooks needed for
such ASIC-specific hooks (in this case, software clock gating), so
this moves the code to do that into hcd-pci.c ... where it can be
done after the relevant PCI PM state transition (to/from D3).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-23 23:04:28 -08:00
David Brownell
188075211c [PATCH] USB: EHCI updates split init/reinit logic for resume
Moving the PCI-specific parts of the EHCI driver into their own file
created a few issues ... notably on resume paths which (like swsusp)
require re-initializing the controller.  This patch:

 - Splits the EHCI startup code into run-once HCD setup code and
   separate "init the hardware" reinit code.  (That reinit code is
   a superset of the "early usb handoff" code.)

 - Then it makes the PCI init code run both, and the resume code only
   run the reinit code.

 - It also removes needless pci wrappers around EHCI start/stop methods.

 - Removes a byteswap issue that would be seen on big-endian hardware.

The HCD glue still doesn't actually provide a good way to do all this
run-one init stuff in one place though.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-23 23:04:28 -08:00
David Brownell
abcc944806 [PATCH] USB: EHCI updates mostly whitespace cleanups
This cleans up the recent updates to EHCI PCI support:

  - Gets rid of checks for "is this a PCI device", they're no
    longer needed since this is now all PCI-only code.

  - Reduce log spamming:  MWI is only interesting in the atypical
    case that it can actually be used.

  - Whitespace cleanup, as appropriate for a new file with no
    other pending patches.

So other than that minor logging change, no functional updates.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-23 23:04:28 -08:00
David Brownell
f03c17fc9a [PATCH] USB: EHCI updates
This fixes some bugs in EHCI suspend/resume that joined us over the past
few releases (as usbcore, PCI, pmcore, and other components evolved):

  - Removes suspend and resume recursion from the EHCI driver, getting
    rid of the USB_SUSPEND special casing.

  - Updates the wakeup mechanism to work again; there's a newish usbcore
    call it needs to use.

  - Provide simpler tests for "do we need to restart from scratch", to
    address another case where PCI Vaux was lost.  (In this case it was
    restoring a swsusp snapshot, but there could be others.)

Un-exports a symbol that was temporarily exported.

A notable change from previous version is that this doesn't move
the spinlock init, so there's still a resume/reinit path bug.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-23 23:04:28 -08:00
Andrey Volkov
2463ade2cb [PATCH] Fix copy-paste bug in ohci-ppc-soc.c
Fix copy-paste bug in ohci-ppc-soc.c(ohci_hcd_ppc_soc_drv_remove)

Signed-off-by: Andrey Volkov <avolkov@varma-el.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-18 07:49:45 -08:00
Richard Purdie
87cf203935 [PATCH] USB: OHCI lh7a404 platform device conversion fixup
Fix an error in the OHCI lh7a404 driver after the platform device
conversion.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-17 11:29:55 -08:00
Linus Torvalds
5643f000c1 Merge master.kernel.org:/home/rmk/linux-2.6-drvmodel 2005-11-11 09:24:26 -08:00
Greg Kroah-Hartman
249bb070f5 [PATCH] PCI: removed unneeded .owner field from struct pci_driver
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-10 16:09:17 -08:00
Russell King
3ae5eaec1d [DRIVER MODEL] Convert platform drivers to use struct platform_driver
This allows us to eliminate the casts in the drivers, and eventually
remove the use of the device_driver function pointer methods for
platform device drivers.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-09 22:32:44 +00:00
Olaf Hering
733482e445 [PATCH] changing CONFIG_LOCALVERSION rebuilds too much, for no good reason
This patch removes almost all inclusions of linux/version.h.  The 3
#defines are unused in most of the touched files.

A few drivers use the simple KERNEL_VERSION(a,b,c) macro, which is
unfortunatly in linux/version.h.

There are also lots of #ifdef for long obsolete kernels, this was not
touched.  In a few places, the linux/version.h include was move to where
the LINUX_VERSION_CODE was used.

quilt vi `find * -type f -name "*.[ch]"|xargs grep -El '(UTS_RELEASE|LINUX_VERSION_CODE|KERNEL_VERSION|linux/version.h)'|grep -Ev '(/(boot|coda|drm)/|~$)'`

search pattern:
/UTS_RELEASE\|LINUX_VERSION_CODE\|KERNEL_VERSION\|linux\/\(utsname\|version\).h

Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 07:55:57 -08:00
David S. Miller
462aae65f6 [USB]: Make early handoff a final fixup instead of a header one.
At header fixup time, it is not yet legal to ioremap() PCI
device registers, yet that is what this quirk code needs to
do.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-04 11:17:24 -08:00
Linus Torvalds
541ab4af11 Don't touch USB controller IO registers when they are disabled
The USB "handoff" code is an early PCI quirk to make sure we own the USB
controller (as opposed to the BIOS/SMM).  But if the controller isn't
even enabled yet, don't try to access it.

Acked-by: Paul Mackerras <paulus@samba.org> (who had an alternate patch)
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31 21:12:40 -08:00