This standard is not properly documented, but its settings are at
the tda18271dd driver, and are somewhat obvious, as they follow
the same logic as DVB-T 7MHz.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
There is a bug on mxl5005s logic: when the bandwidth changes, but using
the same delivery system, the code discard the set_params()
reconfiguration request.
This was happening because, in the previous coding, the bandwidth
calculus were after the check for delivery system changes.
The previous patch changed the logic to estimate the bandwidth to
happend together with the changes at the delivery system.
So, with a one-statement change, it is possible to make the tuner to
reconfigure, in order to adjust to bandwidth changes. this will
likely fix issues on countries that use 7MHz/8MHz DVB-T channels.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This driver implements a fake get_bandwidth() callback. In
reallity, the tuner driver won't adjust its low-pass
filter based on a bandwidth, and were just providing a fake
method for demods to read whatever was "set".
This code is useless, as none of the drivers that use
this tuner seems to require a get_bandwidth() callback.
While here, convert set_params to use the DVBv5 way to pass
parameters to tuners.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This driver implements a fake get_bandwidth() callback. In
reallity, the tuner driver won't adjust its low-pass
filter based on a bandwidth, and were just providing a fake
method for demods to read whatever was "set".
This code is useless, as none of the drivers that use
this tuner seems to require a get_bandwidth() callback.
While here, convert set_params to use the DVBv5 way to pass
parameters to tuners.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This driver implements a fake get_bandwidth() callback. In
reallity, the tuner driver won't adjust its low-pass
filter based on a bandwidth, and were just providing a fake
method for demods to read whatever was "set".
This code is useless, as none of the drivers that use
this tuner seems to require a get_bandwidth() callback.
While here, convert set_params to use the DVBv5 way to pass
parameters to tuners.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Instead of just estimating the bandwidth for DVB-C annex A/C,
also fill it at the core for ATSC and DVB-C annex B. This
simplifies the logic inside the tuners, as all non-satellite
tuners can just use c->bandwidth_hz for all supported
delivery systems.
It could make sense to latter use it also for satellite
systems, as several DVB-S drivers have their own calculus.
However, on DVB-S2 the bw estimation is a little more complex,
and the existing drivers have some optimized calculus for
bandwidth. So, let's not touch on it for now.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
SYS_DVBC_ANNEX_AC is an alias for SYS_DVBC_ANNEX_A. However,
the first one is incorrect, as not all devices support both.
So, replace its occurrences by the proper value (either
SYS_DVBC_ANNEX_A or both SYS_DVBC_ANNEX_A and SYS_DVBC_ANNEX_C).
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
dvb_register calls videobuf_dvb_register_bus, but if that returns
a failure the module will be unloaded without clearing the
value of core->gate_ctrl which will cause an oops in macros
called from video_open in cx88-video.c
Signed-off-by: David Fries <David@Fries.net>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Istvan Varga <istvan_v@mailbox.hu>
Cc: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Stop dual frontend attach in warm state with single devices.
Since this is a no reconnect device this occurs only after a warm system
reboot.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Re: [git:v4l-dvb/for_v3.3] [media] it9135: add support for IT9135 9005 devices
On Sun, 2011-12-11 at 11:55 +0100, Mauro Carvalho Chehab wrote:
> This is an automatic generated email to let you know that the following patch were queued at the
> http://git.linuxtv.org/media_tree.git tree:
>
> Subject: [media] it9135: add support for IT9135 9005 devices
> Author: Malcolm Priestley <tvboxspy@gmail.com>
> Date: Wed Nov 30 17:16:09 2011 -0300
>
> Support add for IT9135 9005 devices
>
> With this patch IT9135 devices now move to using
> dvb-usb-it9135-01.fw firmware
> IT9137 remain on previous firmware.
Hi Mauro,
I have made a small mistake on this patch.
I forgot to increase number of num_device_descs to 4.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The advantage of kcalloc is, that will prevent integer overflows which could
result from the multiplication of number of elements and size and it is also
a bit nicer to read.
The semantic patch that makes this change is available
in https://lkml.org/lkml/2011/11/25/107
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The advantage of kcalloc is, that will prevent integer overflows which could
result from the multiplication of number of elements and size and it is also
a bit nicer to read.
The semantic patch that makes this change is available
in https://lkml.org/lkml/2011/11/25/107
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The advantage of kcalloc is, that will prevent integer overflows which could
result from the multiplication of number of elements and size and it is also
a bit nicer to read.
The semantic patch that makes this change is available
in https://lkml.org/lkml/2011/11/25/107
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The advantage of kcalloc is, that will prevent integer overflows which could
result from the multiplication of number of elements and size and it is also
a bit nicer to read.
The semantic patch that makes this change is available
in https://lkml.org/lkml/2011/11/25/107
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
There are some issues and miss-behaves at the dvb fe thread:
1) dvb_shutdown_timeout should be dvb_shutdown_timeout * HZ
instead of (dvb_shutdown_timeout * HZ + 1);
2) add a memory barrier to warrant that all CPU's will consider the
new value for release_jiffies;
3) wake up dvb thread also when fepriv->exit == DVB_FE_NO_EXIT.
Signed-off-by: Andreas Oberritter <obi@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The attached patch fixes the automute logic of saa7134.
It avoids the white noise on the pulseaudio startup.
(pulseaudio reads the saa7134 alsa device on startup)
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Message-Id: <1322820073-19347-4-git-send-email-xi.wang@gmail.com>
The error handling with (ret < 0) didn't work where ret is a u32.
Use int instead. To be consistent we also change the functions to
return an int.
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Message-Id: <1322820073-19347-3-git-send-email-xi.wang@gmail.com>
The error handling with (ret < 0) didn't work where ret is a u32.
Use int instead. To be consistent we also change the functions to
return an int.
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Message-Id: <1322820073-19347-2-git-send-email-xi.wang@gmail.com>
The error handling with (ret < 0) didn't work where ret is a u32.
Use int instead. To be consistent we also change the functions to
return an int.
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The new iso bandwidth calculation code accidentally has broken support
for bulk mode cameras. This has broken the following drivers:
finepix, jeilinj, ovfx2, ov534, ov534_9, se401, sq905, sq905c, sq930x,
stv0680, vicam.
Thix patch fixes this. Fix tested with: se401, sq905, sq905c, stv0680 &
vicam cams.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
It seems that a cut-and-past error were added by the last patch:
drivers/media/video/videobuf2-core.c: In function ‘vb2_qbuf’:
drivers/media/video/videobuf2-core.c:1099:14: warning: comparison between ‘enum v4l2_buf_type’ and ‘enum v4l2_memory’ [-Wenum-compare]
On all places V4L2_MEMORY_USERPTR is used, it is associated with
q->memory, and not b->type. So, the fix seems obvious.
Cc: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Pawel Osciak <pawel@osciak.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This patch adds support for user pointer memory buffers to vmalloc
videobuf2 allocator.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
CC: Pawel Osciak <pawel@osciak.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This patch is a result of review of mem_priv entry usage in videobuf2 core.
It fixes all all potential places where it was not checked against NULL or
zeroed after freeing as well as a few style issues.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
CC: Pawel Osciak <pawel@osciak.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
To get direct access to userspace memory pages vb2 allocator needs to
gather read access on mmap semaphore in the current process.
The same semaphore is taken before calling mmap operation, while
both mmap and qbuf are called by the driver or v4l2 core with
driver's lock held. To avoid a AB-BA deadlock (mmap_sem then
driver's lock in mmap and driver's lock then mmap_sem in qbuf)
the videobuf2 core release driver's lock, takes mmap_sem and then
takes again driver's lock. get_userptr methods are now called with
all needed locks already taken to avoid further lock magic inside
memory allocator's code.
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
CC: Pawel Osciak <pawel@osciak.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Heuristic that checks if the memory pointer has been changed lacked a check
if the pointer was actually provided by the userspace, what allowed one to
queue a NULL pointer which was accepted without further checking. This
patch fixes this issue.
Reported-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
CC: Pawel Osciak <pawel@osciak.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
fix the following build warning:
lgdt330x.c: In function "lgdt330x_set_parameters":
lgdt330x.c:346:6: warning: variable "err" set but not used
[-Wunused-but-set-variable]
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
initialize *ucblocks to zero & fix the following build warning:
lgdt330x.c: In function "lgdt330x_read_ucblocks":
lgdt330x.c:288:6: warning: variable "err" set but not used
[-Wunused-but-set-variable]
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
PCTV290E: Attach a single frontend, rather than a frontend each per
delivery system, whereby a multistandard frontend can advertise all
associated delivery systems.
Signed-off-by: Manu Abraham <abraham.manu@gmail.com>
Acked-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Override default delivery system information provided by FE_GET_INFO,
so that applications can enumerate delivery systems provided by the
frontend.
Signed-off-by: Manu Abraham <abraham.manu@gmail.com>
Acked-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
As reported by Hartmut <e9hack@googlemail.com>:
> A break is missing before the default statement. Delivery systems for DVB-C result always
> in an error.
Reported-by: Hartmut <e9hack@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Rewrite whole af9013 demod driver in order to decrease I2C I/O.
We need to decrease I2C load since AF9015 (I2C adapter / USB-bridge used)
seems to have some problems under heavy I2C traffic.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
AF9015 firmware does not like if it gets interrupted by I2C adapter
request on some critical phases. During normal operation I2C adapter
is used only 2nd demodulator and tuner on dual tuner devices.
Override demodulator callbacks and use mutex for limit access to
those "critical" paths to keep AF9015 happy.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Set v4l2_subdev flags for a host driver to create a sub-device
node for the driver so the subdev can be directly configured
by applications. Add the subdev open() handler.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Set V4L2_SUBDEV_FL_HAS_DEVNODE flag for the host driver to create
the sensor device node.
Acked-by: HeungJun Kim <riverful.kim@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Enabling automatic exposure yields better image quality. With this setting
the anti-flicker algorithm is also enabled in automatic frequency detection
mode which effectively eliminates distortion from fluctuations of light
intensity at power line frequency.
Acked-by: HeungJun Kim <riverful.kim@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
