Commit Graph

380 Commits

Author SHA1 Message Date
Devin Heitmueller
70ca3c4b9a V4L/DVB: xc3028: fix regression in firmware loading time
Fix a regression in the firmware loading time where it went from 1080 ms to
4700 ms.  This was noticed when the em28xx based HVR-950 took noticably longer
to load the driver.

Regression introduced in hg 12824.  The developer added an msleep() call with
an argument based on a newly introduced xc3028_ctrl field, which is left
initialized to zero for pretty much every board that is currently supported.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-18 00:43:45 -03:00
Mauro Carvalho Chehab
0fb84ce0db V4L/DVB (12846): tuner-xc2028: Fix skip code for devices with broken read (tm6000)
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-18 00:40:22 -03:00
Mauro Carvalho Chehab
2d5024a9e9 V4L/DVB (12825): tm6000: I2C reading operations is not reliable on tm6000
tm6000 sometimes can't read from i2c, but this is currently required for
tuner-xc2028 to work.

This patch adds an option to tuner-xc2028 to not rely on i2c reading.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-18 00:40:06 -03:00
Mauro Carvalho Chehab
e5cc2bf445 V4L/DVB (12824): tuner-xc2028: adds an option to send i2c data on slower speed
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-18 00:40:05 -03:00
Hans Verkuil
03b1930efd V4L/DVB: saa7146: fix regression of the av7110/budget-av driver
An earlier regression fix for the mxb driver (V4L/DVB: saa7146_vv: fix
regression where v4l2_device was registered too late) caused a new
regression in the av7110 driver.

Reverted the old fix and fixed the problem in the mxb driver instead.
Tested on mxb and budget-av cards.

The real problem is that the saa7146 framework has separate probe()
and attach() driver callbacks which should be rolled into one. This
is now done for the mxb driver, but others should do the same. Lack
of hardware makes this hard to do, though. I hope to get hold of some
hexium cards and then I can try to improve the framework to prevent
this from happening again.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-06 19:20:50 -03:00
Michael Hunold
84a1d9c83e V4L/DVB: saa7146: fix up bytesperline if it is an impossible value
xawtv using DGA on a Radeon graphics card provides bogus
values to S_FBUF, which will then screw up overlay video:

https://bugs.launchpad.net/ubuntu/+source/xawtv/+bug/499734

This fixes the bytesperline value if it is off completely.

Signed-off-by: Michael Hunold <michael@mihu.de>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-06 19:19:04 -03:00
Tejun Heo
5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Andy Walls
dbb9de9bc1 V4L/DVB: tuner-types: Add Sony BTF-Pxn01Z tuner type used on GigaPocket cards
Sony makes custome tuners for its GigaPocket line of ivtv based capture
cards.  This adds an entry to the tuner-types list for such tuners.
Parameters are based on experiments by Eric Anderson <rico99@sbcglobal.net>.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26 15:11:07 -03:00
Hans Verkuil
cd7d9beb09 V4L/DVB: saa7146_vv: fix regression where v4l2_device was registered too late
v4l2_device_register needs to be called before the i2c subdevs are loaded.
However, it was called afterwards in the saa7146 driver. This caused an oops
when loading the mxb and hexium drivers. The vv_init function is now split
into two: one registers the v4l2_device, the other does the rest of the
initialization. The three drivers that depend on this have been updated to
call the new vv_devinit function.

Thanks to Michael Hunold for reporting this.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26 15:11:05 -03:00
Mauro Carvalho Chehab
7d35028446 V4L/DVB: tuner-xc2028: Fix demod breakage for XC3028L
A small mistake on the last patch broke demod s-code setup for
XC3028L (firmware 3.2 and upper). Fix it.

Thanks-to: Stefan Ringel <stefan.ringel@arcor.de>

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26 15:11:03 -03:00
Mauro Carvalho Chehab
7f2199c03b V4L/DVB: tuner-xc2028: fix tuning logic to solve a regression in Australia
There's one reported regression in Australia (DTV7) and some
reported troubles with newer firmwares found on xc3028l chips.
Rework the logic to improve tuner on those cases.

Thanks-to: Robert Lowery <rglowery@exemail.com.au>
Thanks-to: Stefan Ringel <stefan.ringel@arcor.de>
Tested-by: Robert Lowery <rglowery@exemail.com.au>
CC: stable.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26 15:11:03 -03:00
Mauro Carvalho Chehab
ba9e9f3c08 saa7146: stop DMA before de-allocating DMA scatter/gather page buffers
Thanks-to: Hartmut <e9hack@googlemail.com> for pointing me the problem
and testing the fix.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-01 22:02:03 -02:00
Michael Krufky
3f76cf8c8e V4L/DVB (13934): tda8290: Fix FM radio easy programming standard selection for TDA8295
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-01-17 11:31:37 -02:00
Michael Krufky
19f8a6c37e V4L/DVB (13887): tda8290: add autodetection support for TDA8295c2
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-01-17 11:31:36 -02:00
Mauro Carvalho Chehab
e27d38112e V4L/DVB (13612): IR: Move common IR code to drivers/media/IR
This is the first step of creating a common code for IR that can be
used by other input devices.

For now, keep IR dir at drivers/media, to easy the movement of the IR files,
but later patches may move it to drivers/IR or drivers/input/IR.

No functional changes is done on this patch.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16 00:18:42 -02:00
Mauro Carvalho Chehab
05395a3d86 V4L/DVB (13576): ir-common: fix an oops caused by the usage of an initialized drvdata
As reported by Sander Eikelenboom <linux@eikelemboon.it>:

> Tried to update my v4l-dvb modules today, but got a bug with my pinnacle
> card, seems to be related to the recent changes in the ir code.
>
> Dec  5 23:30:25 security kernel: [    5.735698] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
> Dec  5 23:30:25 security kernel: [    5.735716] IP: [<ffffffffa00997be>] :ir_common:ir_input_free+0x26/0x3e

Thanks-to: Sander Eikelenboom <linux@eikelemboon.it> for reporting and testing the fix.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16 00:18:09 -02:00
Laurent Pinchart
327ae59757 V4L/DVB (13557): v4l: Remove unneeded video_device::minor usage in drivers
The video_device::minor field is used where it shouldn't, either to

- test for error conditions that can't happen anymore with the current
  v4l-dvb core,
- store the value in a driver private field that isn't used anymore,
- check the video device type where video_device::vfl_type should be
  used, or
- create the name of a kernel thread that should get a stable name.

Remove or fix those use cases.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16 00:17:58 -02:00
Laurent Pinchart
50462eb065 V4L/DVB (13555): v4l: Use video_device_node_name() instead of the minor number
Instead of using the minor number in kernel log messages, use the device
node name as returned by the video_device_node_name() function. This
makes debug, informational and error messages easier to understand for
end users.

[mchehab.redhat.com: removed tm6000 changes as tm6000 is not ready yet for submission even on staging]

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16 00:17:57 -02:00
Laurent Pinchart
63b0d5ad20 V4L/DVB (13554a): v4l: Use the video_drvdata function in drivers
Fix all device drivers to use the video_drvdata function instead of
maintaining a local list of minor to private data mappings. Call
video_set_drvdata to register the driver private pointer when not
already done.

Where applicable, the local list of mappings is completely removed when
it becomes unused.

[mchehab.redhat.com: removed tm6000 changes as tm6000 is not ready yet for submission even on staging]

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16 00:17:56 -02:00
Laurent Pinchart
38c7c03603 V4L/DVB (13550): v4l: Use the new video_device_node_name function
Fix all device drivers to use the new video_device_node_name function.

This also strips kernel log messages from the "/dev/" prefix, has the device
node location is a userspace policy decision unknown to the kernel.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16 00:17:55 -02:00
Mauro Carvalho Chehab
cda4303f55 V4L/DVB (13546): ir-keymaps: Add table for Terratec Cinergy XS FM
This IR uses NEC protocol, with address=0x14. This keymap is similar
to the existing Terratec Cinergy XS, except that:
	- it contains the full address/command code;
	- the Music button were mapped as KEY_RADIO;
	- some keycodes from the previous entry were wrong, IMHO.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16 00:17:53 -02:00
Mauro Carvalho Chehab
4039ff28a5 V4L/DVB (13544): ir-keymaps: mark the new rc5 hauppauge with IR_TYPE_RC5
While here, move the table to a better place inside the file

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16 00:17:52 -02:00
David Wong
5476ffd2b7 V4L/DVB (13592): max2165: 32bit build patch
This patch drops usage of floating point variable for 32bit build

Signed-off-by: David T. L. Wong <davidtlwong@gmail.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-10 12:45:18 -02:00
Linus Torvalds
3e74683137 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (345 commits)
  V4L/DVB (13542): ir-keytable: Allow dynamic table change
  V4L/DVB (13541): atbm8830: replace 64-bit division and floating point usage
  V4L/DVB (13540): ir-common: Cleanup get key evdev code
  V4L/DVB (13539): ir-common: add __func__ for debug messages
  V4L/DVB (13538): ir-common: Use a dynamic keycode table
  V4L/DVB (13537): ir: Prepare the code for dynamic keycode table allocation
  V4L/DVB (13536): em28xx: Use the full RC5 code on HVR-950 Remote Controller
  V4L/DVB (13535): ir-common: Add a hauppauge new table with the complete RC5 code
  V4L/DVB (13534): ir-common: Remove some unused fields/structs
  V4L/DVB (13533): ir: use dynamic tables, instead of static ones
  V4L/DVB (13532): ir-common: Add infrastructure to use a dynamic keycode table
  V4L/DVB (13531): ir-common: rename the debug routine to allow exporting it
  V4L/DVB (13458): go7007: subdev conversion
  V4L/DVB (13457): s2250: subdev conversion
  V4L/DVB (13456): s2250: Change module structure
  V4L/DVB (13528): em28xx: add support for em2800 VC211A card
  em28xx: don't reduce scale to half size for em2800
  em28xx: don't load audio modules when AC97 is mis-detected
  em28xx: em2800 chips support max width of 640
  V4L/DVB (13523): dvb-bt8xx: fix compile warning
  ...

Fix up trivial conflicts due to spelling fixes from the trivial tree in
	Documentation/video4linux/gspca.txt
	drivers/media/video/cx18/cx18-mailbox.h
2009-12-09 19:50:49 -08:00
Jiri Kosina
d014d04386 Merge branch 'for-next' into for-linus
Conflicts:

	kernel/irq/chip.c
2009-12-07 18:36:35 +01:00
Mauro Carvalho Chehab
e97f467796 V4L/DVB (13542): ir-keytable: Allow dynamic table change
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:42:23 -02:00
Mauro Carvalho Chehab
7fee03e487 V4L/DVB (13540): ir-common: Cleanup get key evdev code
The same loop to seek for a key were used on different places. Also,
no spinlock were protecting it to avoid the risk of replacing a keycode
while seeking for a new code.

This cleanup does:
	- create an unique function to seek for a code;
	- adds an spinlock to protect the table lookup;
	- remove some unused code;
	- simplifies to code to make it easier to understand.

Basically no change in behavior should be noticed after this patch.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:42:22 -02:00
Mauro Carvalho Chehab
f6fc504940 V4L/DVB (13538): ir-common: Use a dynamic keycode table
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:42:21 -02:00
Mauro Carvalho Chehab
055cd55601 V4L/DVB (13537): ir: Prepare the code for dynamic keycode table allocation
Currently, the IR table is initialized by calling ir_input_init(). However,
this function doesn't return any error code, nor has a function to be called
when de-initializing the IR's.

Change the return argment to integer and make sure that each driver will
handle the error code. Also adds a function to free any resources that may
be allocating there: ir_input_free().

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:42:21 -02:00
Mauro Carvalho Chehab
35d1988c6e V4L/DVB (13535): ir-common: Add a hauppauge new table with the complete RC5 code
Now that V4L drivers can support more than 7 bits for scan code, let's
add a modified version for the Hauppauge Grey IR containing the full IR
scancode.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:42:20 -02:00
Mauro Carvalho Chehab
8573b74af2 V4L/DVB (13533): ir: use dynamic tables, instead of static ones
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:42:19 -02:00
Mauro Carvalho Chehab
ef53a1159d V4L/DVB (13532): ir-common: Add infrastructure to use a dynamic keycode table
V4L drivers use an static keycode vector with 128 entries, where the scancode
indexes the keycode. While this works, it limits the scancodes to have only
7 bits, not allowing for example full RC5 codes.

Instead of implementing the same code on every V4L driver, provide a common
infrastructure to handle the bigger tables, minimizing the changes inside
each driver.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:42:19 -02:00
Mauro Carvalho Chehab
4e89217b94 V4L/DVB (13531): ir-common: rename the debug routine to allow exporting it
As newer IR common code will be added on other files, we need a global
debug var inside the module.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:42:18 -02:00
Roel Kluin
c95a419a56 V4L/DVB: Fix test in copy_reg_bits()
The reg_pair2[j].reg was tested twice.

Cc: <stable@kernel.org>
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:41:45 -02:00
David T.L. Wong
95963cbcd0 V4L/DVB (13373): Maxium MAX2165 silicon tuner
Adds support for Maxim MAX2165 silicon tuner.

It is tested on Mygica X8558Pro, which has MAX2165, ATBM8830 and CX23885

Signed-off-by: David T. L. Wong <davidtlwong@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:41:33 -02:00
Devin Heitmueller
48c511ed67 V4L/DVB (13331): mxl5005s: provide ability to override QAM gain for HVR-1600
The HVR-1600 doesn't use the standard mechanism for computing the gain when
in QAM mode, instead always forcing it to be 0x02.  Provide the ability to
override the algorithm on a per-board basis.

This change results in an improvement of 0.4-0.6 dB for QAM tuning.

This work was sponsored by ONELAN Limited.

Cc: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:41:23 -02:00
Michael Krufky
972aacc298 V4L/DVB (13262): tda18271: fix regression preventing std map override from taking effect
In the changeset entitled, "tda18271: add support for the set_config method",
the initialization order was changed such that the standard map overrides
were being applied before loading the default standard map, based on the
stepping of the silicon.  This changeset restores the proper order by
processing the standard map overrides both within the tda18271_set_config()
and the tda18271_attach() functions, after we read the id register of the
tuner.

Thanks to Michael Obst for his testing, helping me to identify the regression.

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Michael Obst <mike.obst@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:41:09 -02:00
Michael Obst
0700adec9e V4L/DVB (13260): saa7134: add support for Leadtek Winfast DTV-1000S remote control
Signed-off-by: Michael Obst <mike.obst@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:41:08 -02:00
Roel Kluin
f14a2972e4 V4L/DVB (13241): Cleanup redundant tests on unsigned
The variables are unsigned so the test `>= 0' is always true,
the `< 0' test always fails. In these cases the other part of
the test catches wrapped values.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:41:04 -02:00
Johann Friedrichs
311c70e1f9 V4L/DVB (13239): saa7146: fix memory leakage in pagetable-handling
In buffer_release() the previously allocated pagetables are not
freed,  which might result in a memory leak in certain application
use-cases, where the frame format is changed from planar format to
non-planar format. The fix explicitely frees the page tables when a
format change is done and when buffer_release() is called.

Signed-off-by: Johann Friedrichs <johann.friedrichs@web.de>
Signed-off-by: Michael Hunold <hunold@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:41:04 -02:00
Michael Krufky
5abaa530bf V4L/DVB (13220): tda18271: increment module version minor
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:40:57 -02:00
Michael Krufky
712bc0b30f V4L/DVB (13219): tda18271: remove unneeded braces in switch..case block
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:40:57 -02:00
Michael Krufky
5881ecfca0 V4L/DVB (13218): tda18271: consolidate common code for calibration on startup determination
consolidate common code used to determine if calibration on startup is needed

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:40:57 -02:00
Michael Krufky
188ea058ff V4L/DVB (13217): tda18271: handle rf_cal_on_startup properly during attach
If rf_cal_on_startup is enabled in the structure passed into
tda18271_attach, and the cal module option isn't disabled, then we
should run the initialization and calibration procedures during the
tda18271_attach function call, regardless of how many instances of the
driver have been attached.  If the device is already calibrated, the
driver will detect that and will only calibrate again if necessary.

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:40:56 -02:00
Michael Krufky
c54e1dde58 V4L/DVB (13216): tda18271: initialize tuner during set_config if rf_cal_on_startup is set
If rf_cal_on_startup is enabled in the structure passed into
tda18271_set_config, and the cal module option isn't disabled,
then we should run the initialization and calibration procedures
during the tda18271_set_config function call.

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:40:56 -02:00
Michael Krufky
42f9a03ed3 V4L/DVB (13215): tda18271: add support for the set_config method
Add the set_config method to allow drivers to configure the
tda18271 driver options after attach.

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:40:55 -02:00
Michael Krufky
1724c8fa7e V4L/DVB (13214): tda18271: allow for i2c buses that cant send 16 bytes at once
There is already an option for sending 16 byte chunks rather that writing
39 bytes all at once during the tuner's initialization.  Some i2c buses
can't send 16 bytes at once, so create an option for sending 8 byte chunks.

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:40:55 -02:00
Devin Heitmueller
760c466c66 V4L/DVB (13188): xc5000: return an error on tuning attempts if firmware not loaded
Xc5000 tuning attempts shouldn't return zero in the case where the firmware
did not load successfully.

Thanks to Michael Krufky for pointing out this issue.

Cc: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:40:48 -02:00
Igor M. Liplianin
9d2ba7ad80 V4L/DVB (13135): Add support for TeVii remotes
The patch brings infrared remote support for some cx88 based cards.
Such as TeVii S460,S420.

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:40:29 -02:00
Igor M. Liplianin
d8d8622552 V4L/DVB (13134): Add support for TBS-likes remotes
The patch brings infrared remote support for some cx88 based cards.
Such as:
TeVii S460,S420; Omicom SS4; SatTrade ST4200;
TBS 8920,8910; Prof 7300,6200.

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:40:29 -02:00