Commit Graph

59 Commits

Author SHA1 Message Date
Jonathan Corbet
46787b481b gdth: cdev lock_kernel() pushdown
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2008-06-20 14:05:49 -06:00
James Bottomley
a85591fd0b [SCSI] gdth: fix Error: Driver 'gdth' is already registered, aborting...
This message appears on modprobe/rmmod/modprobe of the driver.  It's
caused because if the driver has no instances, it returns an error
from gdth_init, which causes the module to fail to load.
Unfortunately, the module's pci driver is still registered at this
point.

Fix this by making gdth behave like a modern driver and insert even if
it doesn't find any instances (in case of hot plug or software driven
binding).

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-05-08 10:01:53 -05:00
James Bottomley
2d6f0d0cd9 [SCSI] gdth: fix timer handling
The global timer handling is problematic in that if someone unbinds a
PCI gdth instance, the BUG_ON() in the timer will cause a panic.

Fix this by making the timer start and stop depending on whether there
are instances present.  This should also permit binding and unbinding
to work.

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-05-08 10:01:39 -05:00
Boaz Harrosh
64a87b244b [SCSI] Let scsi_cmnd->cmnd use request->cmd buffer
- struct scsi_cmnd had a 16 bytes command buffer of its own.
   This is an unnecessary duplication and copy of request's
   cmd. It is probably left overs from the time that scsi_cmnd
   could function without a request attached. So clean that up.

 - Once above is done, few places, apart from scsi-ml, needed
   adjustments due to changing the data type of scsi_cmnd->cmnd.

 - Lots of drivers still use MAX_COMMAND_SIZE. So I have left
   that #define but equate it to BLK_MAX_CDB. The way I see it
   and is reflected in the patch below is.
   MAX_COMMAND_SIZE - means: The longest fixed-length (*) SCSI CDB
                      as per the SCSI standard and is not related
                      to the implementation.
   BLK_MAX_CDB.     - The allocated space at the request level

 - I have audit all ISA drivers and made sure none use ->cmnd in a DMA
   Operation. Same audit was done by Andi Kleen.

(*)fixed-length here means commands that their size can be determined
   by their opcode and the CDB does not carry a length specifier, (unlike
   the VARIABLE_LENGTH_CMD(0x7f) command). This is actually not exactly
   true and the SCSI standard also defines extended commands and
   vendor specific commands that can be bigger than 16 bytes. The kernel
   will support these using the same infrastructure used for VARLEN CDB's.
   So in effect MAX_COMMAND_SIZE means the maximum size command
   scsi-ml supports without specifying a cmd_len by ULD's

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-05-02 10:18:22 -05:00
Boaz Harrosh
d35055a0f2 [SCSI] gdth: remove command accessors
These are no longer necessary.

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Tested-by: Joerg Dorchain: <joerg@dorchain.net>
Tested-by: Stefan Priebe <s.priebe@allied-internet.ag>
Tested-by: Jon Chelton <jchelton@ffpglobal.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:15:39 -05:00
Jeff Garzik
cff2680643 [SCSI] gdth: convert to PCI hotplug API
- remove PCI device sort, which greatly simplifies PCI probe,
  permitting direct, per-HBA function calls rather than an indirect
  route to the same end result.

- remove need for pcistr[]

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:15:36 -05:00
Jeff Garzik
4c9c8d782c [SCSI] gdth: PCI probe cleanups, prep for PCI hotplug API conversion
- Reduce uses of gdth_pci_str::pdev, preferring a local variable
  (or function arg) 'pdev' instead.

- Reduce uses of gdth_pcistr array, preferring local variable
  (or function arg) 'pcistr' instead.

- Eliminate lone use of gdth_pci_str::irq, using equivalent
  pdev->irq instead

- Eliminate assign-only gdth_pci_str::io_mm

Note:  If the indentation seems weird, that's because a line was
converted from spaces to tabs, when it was modified.

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:15:36 -05:00
Sven Schnelle
1b96f8955a [SCSI] gdth: Allocate sense_buffer to prevent NULL pointer dereference
Fix NULL pointer dereference during execution of Internal commands,
where gdth only allocates scp, but not scp->sense_buffer. The rest of
the code assumes that sense_buffer is allocated, which leads to a kernel
oops e.g. on reboot (during cache flush).

Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-14 20:31:18 -05:00
Boaz Harrosh
ee54cc6af9 [SCSI] gdth: fix to internal commands execution
The recent patch named:
  [SCSI] gdth: !use_sg cleanup and use of scsi accessors

has done a bad job in handling internal commands issued by gdth_execute().

Internal commands are issued with device gdth_cmd_str ready made directly
to the card, without any mapping or translations of scsi commands. So here
I added a gdth_cmd_str pointer to the gdth_cmndinfo private structure which
is then copied directly to host.

following this patch is a cleanup that removes the home cooked accessors
and reverts them to regular scsi_cmnd accessors. Since they are not used
anymore. After review maybe the 2 patches should be squashed together.

FIXME: There is still a problem with gdth_get_info(). as reported there
   is a WARN_ON trigerd in dma_free_coherent() when doing:
   $ cat /proc/sys/gdth/0

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Tested-by: Joerg Dorchain: <joerg@dorchain.net>
Tested-by: Stefan Priebe <s.priebe@allied-internet.ag>
Tested-by: Jon Chelton <jchelton@ffpglobal.com>
Cc: Stable Tree <stable@kernel.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-27 15:54:26 -08:00
Boaz Harrosh
b31ddd31c2 [SCSI] gdth: bugfix for the at-exit problems
gdth_exit would first remove all cards then stop the timer
and would not sync with the timer function. This caused a crash
in gdth_timer() when module was unloaded.
So del_timer_sync the timer before we delete the cards.

also the reboot notifier function would crash. So clean
that up and fix the crashes.

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Tested-by: Joerg Dorchain: <joerg@dorchain.net>
Tested-by: Stefan Priebe <s.priebe@allied-internet.ag>
Tested-by: Jon Chelton <jchelton@ffpglobal.com>
Cc: Stable Tree <stable@kernel.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-27 15:53:43 -08:00
Sergio Luis
99109301d1 [SCSI] gdth: update deprecated pci_find_device
Fix compilation warning in gdth.c, which was using the deprecated
pci_find_device.

drivers/scsi/gdth.c:645: warning: 'pci_find_device' is deprecated (declared at include/linux/pci.h:495)

Changing it to use pci_get_device, instead.

Signed-off-by: Sergio Luis <sergio@larces.uece.br>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-13 09:33:10 -06:00
Boaz Harrosh
61c92814dc [SCSI] gdth: scan for scsi devices
The patch: "gdth: switch to modern scsi host registration"

missed one simple fact when moving a way from scsi_module.c.
That is to call scsi_scan_host() on the probed host.
With this the gdth driver from 2.6.24 is again able to
see drives and boot.

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Tested-by: Joerg Dorchain <joerg@dorchain.net>
Tested-by: Stefan Priebe <s.priebe@allied-internet.ag>
Tested-by: Jon Chelton <jchelton@ffpglobal.com>
Cc: Stable Tree <stable@kernel.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-13 09:32:05 -06:00
Jeff Garzik
230e886e7b [SCSI] gdth: kill unneeded 'irq' argument
Neither gdth_get_status() nor __gdth_interrupt() need their 'irq' argument,
so remove it.

[akpm@linux-foundation.org: coding style fixes]
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Acked-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 18:28:14 -06:00
Linus Torvalds
1212663fba Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (39 commits)
  [SCSI] qla2xxx: Update version number to 8.02.00-k5.
  [SCSI] qla2xxx: Correct display of ISP serial-number.
  [SCSI] qla2xxx: Correct residual-count handling discrepancies during UNDERRUN handling.
  [SCSI] qla2xxx: Make driver (mostly) legacy I/O port free.
  [SCSI] qla2xxx: Fix issue where final flash-segment updates were falling into the slow-path write handler.
  [SCSI] qla2xxx: Handle unaligned sector writes during NVRAM/VPD updates.
  [SCSI] qla2xxx: Defer explicit interrupt-polling processing to init-time scenarios.
  [SCSI] qla2xxx: Resync with latest HBA SSID specification -- 2.2u.
  [SCSI] sym53c8xx: Remove sym_xpt_async_sent_bdr
  [SCSI] sym53c8xx: Remove pci_dev pointer from sym_shcb
  [SCSI] sym53c8xx: Make interrupt handler capable of returning IRQ_NONE
  [SCSI] sym53c8xx: Get rid of IRQ_FMT and IRQ_PRM
  [SCSI] sym53c8xx: Use scmd_printk where appropriate
  [SCSI] sym53c8xx: Simplify DAC DMA handling
  [SCSI] sym53c8xx: Remove tag_ctrl module parameter
  [SCSI] sym53c8xx: Remove io_ws, mmio_ws and ram_ws elements
  [SCSI] sym53c8xx: Remove ->device_id
  [SCSI] sym53c8xx: Use pdev->revision
  [SCSI] sym53c8xx: PCI Error Recovery support
  [SCSI] sym53c8xx: Stop overriding scsi_done
  ...
2007-10-23 16:37:29 -07:00
Jens Axboe
45711f1af6 [SG] Update drivers to use sg helpers
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-22 21:19:53 +02:00
Adrian Bunk
05dd7ed2c7 [SCSI] gdth: __init fixes
This patch fixes the following build warnings:

WARNING: vmlinux.o(.text+0xbcffdb): Section mismatch: reference to .init.text.20:gdth_search_drives (between 'gdth_pci_probe_one' and 'gdth_start_timeout')
WARNING: vmlinux.o(.text+0xbd0102): Section mismatch: reference to .init.text.20:gdth_enable_int (between 'gdth_pci_probe_one' and 'gdth_start_timeout')

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-18 08:40:58 -04:00
Linus Torvalds
c596cc46ba scsi/gdth: fix crash in gdth_timeout if no gdth controllers found
If the gdth module is loaded (or compiled in), the gdth_timeout function
gets started even if no actual gdth controllers are found b the probing.

That ends up not only being unnecessary, but also causes a crash due to
the function blindly just trying to pick the first entry off the
"gdth_instances" list, and accessing it - which obviously doesn't work
if the list is empty!

Noticed by Ingo Molnar.

Tested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-15 12:46:16 -07:00
Dhaval Giani
c8e91b0a8f [SCSI] gdth: fix CONFIG_ISA build failure
drivers/scsi/gdth.c: In function ‘gdth_search_dev’:
drivers/scsi/gdth.c:646: warning: ‘pci_find_device’ is deprecated
(declared at include/linux/pci.h:482)
drivers/scsi/gdth.c: In function ‘gdth_init_isa’:
drivers/scsi/gdth.c:857: error: ‘gdth_irq_tab’ undeclared (first use in
this function)
drivers/scsi/gdth.c:857: error: (Each undeclared identifier is reported
only once
drivers/scsi/gdth.c:857: error: for each function it appears in.)
drivers/scsi/gdth.c: In function ‘gdth_copy_internal_data’:
drivers/scsi/gdth.c:2362: warning: unused variable ‘sg’

Looking into the code I notice that gdth_irq_tab is not declared with
CONFIG_ISA=y and !CONFIG_EISA.

The values seem to be same in 2.6.23 (I am not sure why it has been put
with #ifdefs in -mm) so I have just modified the #ifdef to take care of
CONFIG_ISA as well.

Signed-off-by: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:56:24 -04:00
Boaz Harrosh
3892d88ae6 [SCSI] gdth: !use_sg cleanup and use of scsi accessors
gdth_execute() will issue an internal, none scsi-standard commands
onto __gdth_queuecommand(). Since it is not recommended to set
struct scsi_cmnd IO members in llds, gdth now uses internal IO
members for IO. In the case of gdth_execute() these members will be
set properly. In case the command was issued from scsi-ml
(by gdth_queuecommand) they will be set from scsi IO accessors.

  * define gdth IO accessors and use them throughout the driver.
  * use an sg-of-one in gdth_execute() and fix gdth_special_cmd()
    accordingly.
  * Clean the not use_sg code path and company

Signed-off-by Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:56:13 -04:00
Boaz Harrosh
f842b64e0f [SCSI] gdth: Move members from SCp to gdth_cmndinfo, stage 2
- Cleanup the rest of the scsi_cmnd->SCp members and move them
    to gdth_cmndinfo:
    SCp.this_residual 	 => priority
    SCp.buffers_residual => timeout
    SCp.Status 		 => status and dma_dir
    SCp.Message 	 => info
    SCp.have_data_in 	 => volatile wait_for_completion
    SCp.sent_command 	 => OpCode
    SCp.phase 		 => phase

  - Two more members will be naturally removed in the !use_sg cleanup

  TODO: What is the meaning of gdth_cmndinfo.phase? (rhetorically)

Signed-off-by Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:56:09 -04:00
Boaz Harrosh
3058d5de47 [SCSI] gdth: Setup proper per-command private data
- scsi_cmnd and specifically ->SCp of, where heavily abused
    with internal meaning members and flags. So introduce a new
    struct gdth_cmndinfo, put it on ->host_scribble and define a
    gdth_cmnd_priv() accessor to retrieve it from a scsi_cmnd.

  - The structure now holds two members:
    internal_command - replaces the IS_GDTH_INTERNAL_CMD() croft.
    sense_paddr - which was a 64-bit spanning on 2 32-bit members of SCp.
    More overloaded members from SCp and scsi_cmnd will be moved in a later
    patch (For easy review).

  - Split up gdth_queuecommand to an additional internal_function. The later
    is the one called by gdth_execute(). This will be more evident later in
    the scsi accessors patch, but it also facilitates in the differentiation
    between internal_command and external. And the setup of gdth_cmndinfo of
    each command.

Signed-off-by Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:56:05 -04:00
Boaz Harrosh
884f7fba09 [SCSI] gdth: Remove gdth_ctr_tab[]
- Places like Initialization and Reset that Just loop on all devices can
    use the link list with the list_for_each_entry macro.
    But the io_ctrl from user mode now suffers performance-wise because
    code has to do a sequential search for the requested host number.
    I have isolated this search in a gdth_find_ha(int hanum) member
    for future enhancement if needed.

Signed-off-by Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:56:00 -04:00
Christoph Hellwig
835cc24aff [SCSI] gdth: switch to modern scsi host registration
- Use scsi_add_host and friends and track instances ourselves. And
    generally modernize the driver's structure.

  - TODO: Next we can remove the controller table
  - TODO: Fix use of deprecated pci_find_device()

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:55:55 -04:00
Boaz Harrosh
10e1b4bc92 [SCSI] gdth: gdth_interrupt() gdth_get_status() & gdth_wait() fixes
- gdth_get_status() returns a single device interrupt IStatus
  - gdth_interrupt split to __gdth_interrupt() that receives
    flags if is called from gdth_wait().
  - Use dev_id passed from kernel and do not loop on all
    controllers.
  - gdth_wait(), get read of all global variables and call the new
    __gdth_interrupt with these variables on the stack

Signed-off-by Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:55:51 -04:00
Boaz Harrosh
45f1a41b2b [SCSI] gdth: clean up host private data
- Based on same patch from Christoph Hellwig <hch@lst.de>

  - Get rid of all the indirection in the Scsi_Host private data and always
    put the gdth_ha_str directly into it.

  - Change all internal functions prototype to recieve an "gdth_ha_str *ha"
    pointer directlly and kill all that redundent access to the "gdth_ctr_tab[]"
    controller-table.

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:55:46 -04:00
Christoph Hellwig
52759e6abc [SCSI] gdth: Remove virt hosts
The virt_ctr option allows to register a new scsi_host for each bus
on the raid controller.  This non-default option makes no sense with
the current scsi code and prevents cleaning up the host registration,
so remove it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:55:42 -04:00
Jeff Garzik
69916b7cea [SCSI] gdth: Reorder scsi_host_template intitializers
shuffle scsi_host_template members such that they appear in the
order in which they are defined in the header.  this makes is easier
to verify when initializers are missing members.

Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:55:38 -04:00
Jeff Garzik
a52667f3cd [SCSI] gdth: kill gdth_{read,write}[bwl] wrappers
They are direct equivalents to {read,write}[bwl].

Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:55:33 -04:00
Jeff Garzik
8d7a5da4fc [SCSI] gdth: Remove 2.4.x support, in-kernel changelog
* Remove in-source changelog.  It's archived permanently in git and
    various kernel archives, and changelogs should exist purely in git.

  * Remove 2.4.x kernel support.  It is an active obstacle to
    modernizing this driver, at this point.  This includes killing
    gdth_kcompat.h which is 100% redundant in modern kernels.

Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:55:29 -04:00
Christoph Hellwig
8514ef27ee [SCSI] gdth: split out pci probing
Split out per-device pci probing and put it under proper CONFIG_PCI.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:55:24 -04:00
Christoph Hellwig
706a5d4567 [SCSI] gdth: split out eisa probing
Split eisa probing into it's own helper, and do proper error unwinding.
Protect EISA probind by the proper CONFIG_EISA symbol.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:55:20 -04:00
Christoph Hellwig
aed91cb520 [SCSI] gdth: split out isa probing
(note: this is ontop of Jeff's pci cleanup patch)

Split out isa probing into a helper of it's own.  Error handling is
cleaned up, but errors are not propagated yet.  Also enclose the isa
probe under the proper CONFIG_ISA symbol instead of the !IA64 hack.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:55:16 -04:00
Matthew Wilcox
b8bff2aeaf gdth: Make one abuse of scsi_cmnd less obvious
Rather than having internal commands abuse scsi_done to call
  gdth_scsi_done, have all the places that use to call scsi_done directly
  call gdth_scsi_done, which now checks whether the command was internal,
  and calls scsi_done if not.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:55:11 -04:00
Matthew Wilcox
687d2bc487 [SCSI] gdth: Stop abusing ->done for internal commands
The ->done member was being used to mark commands as being internal.
I decided to put a magic number in ->underflow instead.  I believe this
to be safe as no current user of ->underflow has any of the bottom 9
bits set.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:52:41 -04:00
Mariusz Kozlowski
bbfbbbc118 [SCSI] kmalloc + memset conversion to kzalloc
In NCR_D700, a4000t, aic7xxx_old, bvme6000, dpt_i2o, gdth, lpfc,
megaraid, mvme16x osst, pluto, qla2xxx, zorro7xx

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:41:00 -04:00
Jeff Garzik
8e9a8a0d56 [SCSI] gdth: remove redundant PCI stuff
This patch

* removes struct members that duplicate pci_dev members
* replaces ha->stype usage with ha->pdev->device usage where feasible

Signed-off-by: Jeff Garzik <jeff@garzik.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Achim Leubner <Achim_Leubner@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-31 10:36:30 -05:00
Robert P. J. Day
7a960b76ed [SCSI] gdth: Fix obvious typo "spin_lock_irqrestore()"
Fix misspelled "spin_lock_irqrestore" to read "spin_unlock_irqrestore"
instead.

Presumably, GDTH_RTC doesn't get used a lot.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Acked-by: Achim Leubner <achim_leubner@adaptec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-30 08:39:52 -05:00
David Rientjes
6c4b7e4fdf [SCSI] gdth: fix ambiguous gdthtable definition
Labeling a variable as __attribute_used__ is ambiguous: it means
__attribute__((unused)) for gcc <3.4 and __attribute__((used)) for gcc >=3.4.
There is no such thing as labeling a variable as __attribute__((used)).  We
assume that we're simply suppressing a warning here if gdthtable[] is declared
but unreferenced.

Acked-by: Achim Leubner <achim_leubner@adaptec.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-30 08:39:16 -05:00
Joerg Dorchain
bb9ba31ca3 [SCSI] gdth: fix oops in gdth_copy_cmd()
Recent alterations to the gdth_fill_raw_cmd() path no longer set the
sg_ranz field for zero transfer commands. However, this field is used
lower down in the function to initialise ha->cmd_len to the size of
the firmware packet.  If this uninitialised field contains a bogus
value, ha->cmd_len can become much larger than the actual firmware
packet and end up oopsing in gdth_copy_cmd() as it tries to copy this
huge packet to the device (usually because it runs into an unallocated
page).

The fix is to initialise the sg_ranz field to zero at the start of
gdth_fill_raw_cmd().

Signed-off-by: Joerg Dorchain <joerg@dorchain.net>
Acked-by: "Leubner, Achim" <Achim_Leubner@adaptec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-03-11 10:58:49 -05:00
Tim Schmielau
cd354f1ae7 [PATCH] remove many unneeded #includes of sched.h
After Al Viro (finally) succeeded in removing the sched.h #include in module.h
recently, it makes sense again to remove other superfluous sched.h includes.
There are quite a lot of files which include it but don't actually need
anything defined in there.  Presumably these includes were once needed for
macros that used to live in sched.h, but moved to other header files in the
course of cleaning it up.

To ease the pain, this time I did not fiddle with any header files and only
removed #includes from .c-files, which tend to cause less trouble.

Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha,
arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig,
allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all
configs in arch/arm/configs on arm.  I also checked that no new warnings were
introduced by the patch (actually, some warnings are removed that were emitted
by unnecessarily included header files).

Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:54 -08:00
Arjan van de Ven
00977a59b9 [PATCH] mark struct file_operations const 6
Many struct file_operations in the kernel can be "const".  Marking them const
moves these to the .rodata section, which avoids false sharing with potential
dirty data.  In addition it'll catch accidental writes at compile time to
these shared resources.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 09:48:45 -08:00
Jean Delvare
107e716b34 [SCSI] gdth: Fix && typos
Fix uses of "&&" where "&" was obviously intended instead.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-11-10 09:59:49 +09:00
David Howells
7d12e780e0 IRQ: Maintain regs pointer globally rather than passing to IRQ handlers
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.

The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around.  On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).

Where appropriate, an arch may override the generic storage facility and do
something different with the variable.  On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.

Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions.  Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller.  A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.

I've build this code with allyesconfig for x86_64 and i386.  I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.

This will affect all archs.  Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

	struct pt_regs *old_regs = set_irq_regs(regs);

And put the old one back at the end:

	set_irq_regs(old_regs);

Don't pass regs through to generic_handle_irq() or __do_IRQ().

In timer_interrupt(), this sort of change will be necessary:

	-	update_process_times(user_mode(regs));
	-	profile_tick(CPU_PROFILING, regs);
	+	update_process_times(user_mode(get_irq_regs()));
	+	profile_tick(CPU_PROFILING);

I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().

Some notes on the interrupt handling in the drivers:

 (*) input_dev() is now gone entirely.  The regs pointer is no longer stored in
     the input_dev struct.

 (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking.  It does
     something different depending on whether it's been supplied with a regs
     pointer or not.

 (*) Various IRQ handler function pointers have been moved to type
     irq_handler_t.

Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 15:10:12 +01:00
Peter Zijlstra
6e9a4738c9 [PATCH] completions: lockdep annotate on stack completions
All on stack DECLARE_COMPLETIONs should be replaced by:
DECLARE_COMPLETION_ONSTACK

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-01 00:39:24 -07:00
Thomas Gleixner
1d6f359a2e [PATCH] irq-flags: scsi: Use the new IRQF_ constants
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02 13:58:53 -07:00
Christoph Hellwig
beb4048750 [SCSI] remove scsi_request infrastructure
With Achim patch the last user (gdth) is switched away from scsi_request
so we an kill it now.  Also disables some code in i2o_scsi that was
broken since the sg driver stopped using scsi_requests.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-10 16:24:40 -05:00
Tobias Klauser
6391a11375 [SCSI] drivers/scsi: Use ARRAY_SIZE macro
Use ARRAY_SIZE macro instead of sizeof(x)/sizeof(x[0]) and remove
duplicates of the macro.

Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-10 10:45:30 -05:00
Leubner, Achim
cbd5f69b98 [SCSI] remove the scsi_request interface from the gdth driver
Initial pass at converting the gdth driver away from the scsi_request
interface so that the request interface can be removed post 2.6.18
without breaking gdth.  Based on changes from Christoph Hellwig
<hch@lst.de>

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-10 10:24:40 -05:00
Christoph Hellwig
5d5ff44fe6 [SCSI] fix up request buffer reference in various scsi drivers
Various scsi drivers use scsi_cmnd.buffer and scsi_cmnd.bufflen in their
queuecommand functions.  Those fields are internal storage for the
midlayer only and are used to restore the original payload after
request_buffer and request_bufflen have been overwritten for EH.  Using
the buffer and bufflen fields means they do very broken things in error
handling.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-06 11:07:25 -04:00
Matthias Gehre
910638ae7e [PATCH] Replace 0xff.. with correct DMA_xBIT_MASK
Replace all occurences of 0xff..  in calls to function pci_set_dma_mask()
and pci_set_consistant_dma_mask() with the corresponding DMA_xBIT_MASK from
linux/dma-mapping.h.

Signed-off-by: Matthias Gehre <M.Gehre@gmx.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28 09:16:07 -08:00