Commit Graph

23 Commits

Author SHA1 Message Date
KAMEZAWA Hiroyuki
908eedc616 walk system ram range
Originally, walk_memory_resource() was introduced to traverse all memory
of "System RAM" for detecting memory hotplug/unplug range.  For doing so,
flags of IORESOUCE_MEM|IORESOURCE_BUSY was used and this was enough for
memory hotplug.

But for using other purpose, /proc/kcore, this may includes some firmware
area marked as IORESOURCE_BUSY | IORESOUCE_MEM.  This patch makes the
check strict to find out busy "System RAM".

Note: PPC64 keeps their own walk_memory_resouce(), which walk through
ppc64's lmb informaton.  Because old kclist_add() is called per lmb, this
patch makes no difference in behavior, finally.

And this patch removes CONFIG_MEMORY_HOTPLUG check from this function.
Because pfn_valid() just show "there is memmap or not* and cannot be used
for "there is physical memory or not", this function is useful in generic
to scan physical memory range.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Américo Wang <xiyou.wangcong@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 07:39:41 -07:00
Gary Hade
c04fc586c1 mm: show node to memory section relationship with symlinks in sysfs
Show node to memory section relationship with symlinks in sysfs

Add /sys/devices/system/node/nodeX/memoryY symlinks for all
the memory sections located on nodeX.  For example:
/sys/devices/system/node/node1/memory135 -> ../../memory/memory135
indicates that memory section 135 resides on node1.

Also revises documentation to cover this change as well as updating
Documentation/ABI/testing/sysfs-devices-memory to include descriptions
of memory hotremove files 'phys_device', 'phys_index', and 'state'
that were previously not described there.

In addition to it always being a good policy to provide users with
the maximum possible amount of physical location information for
resources that can be hot-added and/or hot-removed, the following
are some (but likely not all) of the user benefits provided by
this change.
Immediate:
  - Provides information needed to determine the specific node
    on which a defective DIMM is located.  This will reduce system
    downtime when the node or defective DIMM is swapped out.
  - Prevents unintended onlining of a memory section that was
    previously offlined due to a defective DIMM.  This could happen
    during node hot-add when the user or node hot-add assist script
    onlines _all_ offlined sections due to user or script inability
    to identify the specific memory sections located on the hot-added
    node.  The consequences of reintroducing the defective memory
    could be ugly.
  - Provides information needed to vary the amount and distribution
    of memory on specific nodes for testing or debugging purposes.
Future:
  - Will provide information needed to identify the memory
    sections that need to be offlined prior to physical removal
    of a specific node.

Symlink creation during boot was tested on 2-node x86_64, 2-node
ppc64, and 2-node ia64 systems.  Symlink creation during physical
memory hot-add tested on a 2-node x86_64 system.

Signed-off-by: Gary Hade <garyhade@us.ibm.com>
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 15:59:00 -08:00
Badari Pulavarty
5c755e9fd8 memory-hotplug: add sysfs removable attribute for hotplug memory remove
Memory may be hot-removed on a per-memory-block basis, particularly on
POWER where the SPARSEMEM section size often matches the memory-block
size.  A user-level agent must be able to identify which sections of
memory are likely to be removable before attempting the potentially
expensive operation.  This patch adds a file called "removable" to the
memory directory in sysfs to help such an agent.  In this patch, a memory
block is considered removable if;

o It contains only MOVABLE pageblocks
o It contains only pageblocks with free pages regardless of pageblock type

On the other hand, a memory block starting with a PageReserved() page will
never be considered removable.  Without this patch, the user-agent is
forced to choose a memory block to remove randomly.

Sample output of the sysfs files:

./memory/memory0/removable: 0
./memory/memory1/removable: 0
./memory/memory2/removable: 0
./memory/memory3/removable: 0
./memory/memory4/removable: 0
./memory/memory5/removable: 0
./memory/memory6/removable: 0
./memory/memory7/removable: 1
./memory/memory8/removable: 0
./memory/memory9/removable: 0
./memory/memory10/removable: 0
./memory/memory11/removable: 0
./memory/memory12/removable: 0
./memory/memory13/removable: 0
./memory/memory14/removable: 0
./memory/memory15/removable: 0
./memory/memory16/removable: 0
./memory/memory17/removable: 1
./memory/memory18/removable: 1
./memory/memory19/removable: 1
./memory/memory20/removable: 1
./memory/memory21/removable: 1
./memory/memory22/removable: 1

Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 10:47:21 -07:00
Yasunori Goto
af370fb8cb memory hotplug: small fixes to bootmem freeing for memory hotremove
- Change some naming
  * Magic -> types
  * MIX_INFO -> MIX_SECTION_INFO
  * Change definition of bootmem type from direct hex value

- __free_pages_bootmem() becomes __meminit.

Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Johannes Weiner <hannes@saeurebad.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 10:47:21 -07:00
Nathan Lynch
0d5799449f [POWERPC] Make walk_memory_resource available with MEMORY_HOTPLUG=n
The ehea driver was recently changed[1] to use walk_memory_resource() to
detect the system's memory layout.  However, walk_memory_resource() is
available only when memory hotplug is enabled.  So CONFIG_EHEA was
made to depend on MEMORY_HOTPLUG [2], but it is inappropriate for a
network driver to have such a dependency.

Make the declaration of walk_memory_resource() and its powerpc
implementation (ehea is powerpc-specific) unconditionally available.

[1] 48cfb14f8b
    "ehea: Add DLPAR memory remove support"

[2] fb7b6ca2b6
    "ehea: Add dependency to Kconfig"

Signed-off-by: Nathan Lynch <ntl@pobox.com>
Acked-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-09 11:32:41 +10:00
Yasunori Goto
0475327876 memory hotplug: register section/node id to free
This patch set is to free pages which is allocated by bootmem for
memory-hotremove.  Some structures of memory management are allocated by
bootmem.  ex) memmap, etc.

To remove memory physically, some of them must be freed according to
circumstance.  This patch set makes basis to free those pages, and free
memmaps.

Basic my idea is using remain members of struct page to remember information
of users of bootmem (section number or node id).  When the section is
removing, kernel can confirm it.  By this information, some issues can be
solved.

  1) When the memmap of removing section is allocated on other
     section by bootmem, it should/can be free.
  2) When the memmap of removing section is allocated on the
     same section, it shouldn't be freed. Because the section has to be
     logical memory offlined already and all pages must be isolated against
     page allocater. If it is freed, page allocator may use it which will
     be removed physically soon.
  3) When removing section has other section's memmap,
     kernel will be able to show easily which section should be removed
     before it for user. (Not implemented yet)
  4) When the above case 2), the page isolation will be able to check and skip
     memmap's page when logical memory offline (offline_pages()).
     Current page isolation code fails in this case because this page is
     just reserved page and it can't distinguish this pages can be
     removed or not. But, it will be able to do by this patch.
     (Not implemented yet.)
  5) The node information like pgdat has similar issues. But, this
     will be able to be solved too by this.
     (Not implemented yet, but, remembering node id in the pages.)

Fortunately, current bootmem allocator just keeps PageReserved flags,
and doesn't use any other members of page struct. The users of
bootmem doesn't use them too.

This patch:

This is to register information which is node or section's id.  Kernel can
distinguish which node/section uses the pages allcated by bootmem.  This is
basis for hot-remove sections or nodes.

Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:25 -07:00
Badari Pulavarty
ea01ea937d hotplug memory remove: generic __remove_pages() support
Generic helper function to remove section mappings and sysfs entries for the
section of the memory we are removing.  offline_pages() correctly adjusted
zone and marked the pages reserved.

TODO: Yasunori Goto is working on patches to free up allocations from bootmem.

Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Acked-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:17 -07:00
KAMEZAWA Hiroyuki
48e94196a5 fix memory hot remove not configured case.
Now, arch dependent code around CONFIG_MEMORY_HOTREMOVE is a mess.
This patch cleans up them. This is against 2.6.23-rc6-mm1.

 - fix compile failure on ia64/ CONFIG_MEMORY_HOTPLUG && !CONFIG_MEMORY_HOTREMOVE case.
 - For !CONFIG_MEMORY_HOTREMOVE, add generic no-op remove_memory(),
   which returns -EINVAL.
 - removed remove_pages() only used in powerpc.
 - removed no-op remove_memory() in i386, sh, sparc64, x86_64.

 - only powerpc returns -ENOSYS at memory hot remove(no-op). changes it
   to return -EINVAL.

Note:
Currently, only ia64 supports CONFIG_MEMORY_HOTREMOVE. I welcome other
archs if there are requirements and testers.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:43:02 -07:00
KAMEZAWA Hiroyuki
0c0e619589 memory unplug: page offline
Logic.
 - set all pages in  [start,end)  as isolated migration-type.
   by this, all free pages in the range will be not-for-use.
 - Migrate all LRU pages in the range.
 - Test all pages in the range's refcnt is zero or not.

Todo:
 - allocate migration destination page from better area.
 - confirm page_count(page)== 0 && PageReserved(page) page is safe to be freed..
 (I don't like this kind of page but..
 - Find out pages which cannot be migrated.
 - more running tests.
 - Use reclaim for unplugging other memory type area.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:43:02 -07:00
KAMEZAWA Hiroyuki
75884fb1c6 memory unplug: memory hotplug cleanup
A clean up patch for "scanning memory resource [start, end)" operation.

Now, find_next_system_ram() function is used in memory hotplug, but this
interface is not easy to use and codes are complicated.

This patch adds walk_memory_resouce(start,len,arg,func) function.
The function 'func' is called per valid memory resouce range in [start,pfn).

[pbadari@us.ibm.com: Error handling in walk_memory_resource()]
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:43:01 -07:00
Jesper Juhl
39e91e4331 Clean up duplicate includes in include/linux/memory_hotplug.h
This patch cleans up duplicate includes in
	include/linux/memory_hotplug.h

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Acked-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:42:52 -07:00
Keith Mannthey
f28c5edc06 [PATCH] hot-add-mem x86_64: fixup externs
Fix up externs in memory_hotplug.c.  Cleanup.

Signed-off-by: Keith Mannthey <kmannth@us.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-01 00:39:18 -07:00
Yasunori Goto
dd0932d9d4 [PATCH] pgdat allocation and update for ia64 of memory hotplug: allocate pgdat and per node data
This is a patch to allocate pgdat and per node data area for ia64.  The size
for them can be calculated by compute_pernodesize().

Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27 17:32:37 -07:00
Yasunori Goto
7049027c6f [PATCH] pgdat allocation and update for ia64 of memory hotplug: update pgdat address array
This is to refresh node_data[] array for ia64.  As I mentioned previous
patches, ia64 has copies of information of pgdat address array on each node as
per node data.

At v2 of node_add, this function used stop_machine_run() to update them.  (I
wished that they were copied safety as much as possible.) But, in this patch,
this arrays are just copied simply, and set node_online_map bit after
completion of pgdat initialization.

So, kernel must touch NODE_DATA() macro after checking node_online_map().
(Current code has already done it.) This is more simple way for just
hot-add.....

Note : It will be problem when hot-remove will occur,
       because, even if online_map bit is set, kernel may
       touch NODE_DATA() due to race condition. :-(

Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27 17:32:37 -07:00
Yasunori Goto
10ad400b49 [PATCH] pgdat allocation for new node add (refresh node_data[])
Refresh NODE_DATA() for generic archs.  In this case, NODE_DATA(nid) ==
node_data[nid].  node_data[] is array of address of pgdat.  So, refresh is
quite simple.

Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: "Brown, Len" <len.brown@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27 17:32:36 -07:00
Yasunori Goto
306d6cbe86 [PATCH] pgdat allocation for new node add (generic alloc node_data)
For node hotplug, basically we have to allocate new pgdat.  But, there are
several types of implementations of pgdat.

1. Allocate only pgdat.
   This style allocate only pgdat area.
   And its address is recorded in node_data[].
   It is most popular style.

2. Static array of pgdat
   In this case, all of pgdats are static array.
   Some archs use this style.

3. Allocate not only pgdat, but also per node data.
   To increase performance, each node has copy of some data as
   a per node data. So, this area must be allocated too.

   Ia64 is this style. Ia64 has the copies of node_data[] array
   on each per node data to increase performance.

In this series of patches, treat (1) as generic arch.

generic archs can use generic function. (2) and (3) should have
its own if necessary.

This patch defines pgdat allocator.
Updating NODE_DATA() macro function is in other patch.

Signed-off-by: Yasonori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: "Brown, Len" <len.brown@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27 17:32:36 -07:00
Yasunori Goto
bc02af93dd [PATCH] pgdat allocation for new node add (specify node id)
Change the name of old add_memory() to arch_add_memory.  And use node id to
get pgdat for the node at NODE_DATA().

Note: Powerpc's old add_memory() is defined as __devinit. However,
      add_memory() is usually called only after bootup.
      I suppose it may be redundant. But, I'm not well known about powerpc.
      So, I keep it. (But, __meminit is better at least.)

Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: "Brown, Len" <len.brown@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27 17:32:35 -07:00
Adrian Bunk
72b38d436e [PATCH] memory_hotplug.h cleanup
We don't have to #if guard prototypes.

This also fixes a bug observed by Randy Dunlap due to a misspelled
option in the #if.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-20 07:54:04 -07:00
Andi Kleen
9d99aaa31f [PATCH] x86_64: Support memory hotadd without sparsemem
Memory hotadd doesn't need SPARSEMEM, but can be handled by just preallocating
mem_maps. This only needs some untangling of ifdefs to enable the necessary
code even without SPARSEMEM.

Originally from Keith Mannthey, hacked by AK.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-09 11:53:16 -07:00
KAMEZAWA Hiroyuki
78679302fe [PATCH] memory-hotplug compile fix
include/linux/memory_hotplug.h:53: warning: 'struct page' declared inside parameter list

(akpm: I tossed in a couple more possibly-needed-sometime struct decls too)

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-06 18:40:44 -08:00
Dave Hansen
3947be1969 [PATCH] memory hotplug: sysfs and add/remove functions
This adds generic memory add/remove and supporting functions for memory
hotplug into a new file as well as a memory hotplug kernel config option.

Individual architecture patches will follow.

For now, disable memory hotplug when swsusp is enabled.  There's a lot of
churn there right now.  We'll fix it up properly once it calms down.

Signed-off-by: Matt Tolentino <matthew.e.tolentino@intel.com>
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-29 21:40:44 -07:00
Dave Hansen
bdc8cb9845 [PATCH] memory hotplug locking: zone span seqlock
See the "fixup bad_range()" patch for more information, but this actually
creates a the lock to protect things making assumptions about a zone's size
staying constant at runtime.

Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-29 21:40:44 -07:00
Dave Hansen
208d54e551 [PATCH] memory hotplug locking: node_size_lock
pgdat->node_size_lock is basically only neeeded in one place in the normal
code: show_mem(), which is the arch-specific sysrq-m printing function.

Strictly speaking, the architectures not doing memory hotplug do no need this
locking in show_mem().  However, they are all included for completeness.  This
should also make any future consolidation of all of the implementations a
little more straightforward.

This lock is also held in the sparsemem code during a memory removal, as
sections are invalidated.  This is the place there pfn_valid() is made false
for a memory area that's being removed.  The lock is only required when doing
pfn_valid() operations on memory which the user does not already have a
reference on the page, such as in show_mem().

Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-29 21:40:44 -07:00