Pull vfs fix from Al Viro:
"Off-by-one in d_walk()/__dentry_kill() race fix.
It's very hard to hit; possible in the same conditions as the original
bug, except that you need the skipped branch to contain all the
remaining evictables, so that the d_walk()-calling loop in
d_invalidate() decides there's nothing more to do and doesn't go for
another pass - otherwise that next pass will sweep the sucker.
So it's not too urgent, but seeing that the fix is obvious and the
original commit has spread into all -stable branches..."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
d_walk() might skip too much
Pull ARM fixes from Russell King:
"Three fixes this time around:
- fix a memory leak which occurs when probing performance monitoring
unit interrupts
- fix handling of non-PMD aligned end of RAM causing boot failures
- fix missing syscall trace exit path with syscall tracing enabled
causing a kernel oops in the audit code"
* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
ARM: 8357/1: perf: fix memory leak when probing PMU PPIs
ARM: fix missing syscall trace exit
ARM: 8356/1: mm: handle non-pmd-aligned end of RAM
Pull MIPS fixes from Ralf Baechle:
"MIPS fixes for 4.1 all across the tree"
* 'upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/ralf/linux:
MIPS: strnlen_user.S: Fix a CPU_DADDI_WORKAROUNDS regression
MIPS: BMIPS: Fix bmips_wr_vec()
MIPS: ath79: fix build problem if CONFIG_BLK_DEV_INITRD is not set
MIPS: Fuloong 2E: Replace CONFIG_USB_ISP1760_HCD by CONFIG_USB_ISP1760
MIPS: irq: Use DECLARE_BITMAP
ttyFDC: Fix to use native endian MMIO reads
MIPS: Fix CDMM to use native endian MMIO reads
Pull turbostat tool fixes from Len Brown:
"Just one minor kernel dependency in this batch -- added a #define to
msr-index.h"
* 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: update version number to 4.7
tools/power turbostat: allow running without cpu0
tools/power turbostat: correctly decode of ENERGY_PERFORMANCE_BIAS
tools/power turbostat: enable turbostat to support Knights Landing (KNL)
tools/power turbostat: correctly display more than 2 threads/core
Pull SCSI target fixes from Nicholas Bellinger:
"These are mostly minor fixes, with the exception of the following that
address fall-out from recent v4.1-rc1 changes:
- regression fix related to the big fabric API registration changes
and configfs_depend_item() usage, that required cherry-picking one
of HCH's patches from for-next to address the issue for v4.1 code.
- remaining TCM-USER -v2 related changes to enforce full CDB
passthrough from Andy + Ilias.
Also included is a target_core_pscsi driver fix from Andy that
addresses a long standing issue with a Scsi_Host reference being
leaked on PSCSI device shutdown"
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
iser-target: Fix error path in isert_create_pi_ctx()
target: Use a PASSTHROUGH flag instead of transport_types
target: Move passthrough CDB parsing into a common function
target/user: Only support full command pass-through
target/user: Update example code for new ABI requirements
target/pscsi: Don't leak scsi_host if hba is VIRTUAL_HOST
target: Fix se_tpg_tfo->tf_subsys regression + remove tf_subsystem
target: Drop signal_pending checks after interruptible lock acquire
target: Add missing parentheses
target: Fix bidi command handling
target/user: Disallow full passthrough (pass_level=0)
ISCSI: fix minor memory leak
- Fix sysfs attribute initialization in nct6775 and nct6683 drivers
- Do not attempt to auto-detect tmp435 on I2C address 0x37
- Ensure iio channel is of type IIO_VOLTAGE in ntc_thermistor driver
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=cHeh
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-linus-v4.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
"Some late hwmon patches, all headed for -stable
- fix sysfs attribute initialization in nct6775 and nct6683 drivers
- do not attempt to auto-detect tmp435 on I2C address 0x37
- ensure iio channel is of type IIO_VOLTAGE in ntc_thermistor driver"
* tag 'hwmon-for-linus-v4.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (nct6683) Add missing sysfs attribute initialization
hwmon: (nct6775) Add missing sysfs attribute initialization
hwmon: (tmp401) Do not auto-detect chip on I2C address 0x37
hwmon: (ntc_thermistor) Ensure iio channel is of type IIO_VOLTAGE
We don't assign pi_ctx to desc->pi_ctx until we're certain to succeed
in the function. That means the cleanup path should use the local
pi_ctx variable, not desc->pi_ctx.
This was detected by Coverity (CID 1260062).
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
It seems like we only care if a transport is passthrough or not. Convert
transport_type to a flags field and replace TRANSPORT_PLUGIN_* with a
flag, TRANSPORT_FLAG_PASSTHROUGH.
Signed-off-by: Andy Grover <agrover@redhat.com>
Reviewed-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Aside from whether they handle BIDI ops or not, parsing of the CDB by
kernel and user SCSI passthrough modules should be identical. Move this
into a new passthrough_parse_cdb() and call it from tcm-pscsi and tcm-user.
Reported-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
After much discussion, give up on only passing a subset of SCSI commands
to userspace and pass them all. Based on what pscsi is doing, make sure
to set SCF_SCSI_DATA_CDB for I/O ops, and define attributes identical to
pscsi.
Make hw_block_size configurable via dev param.
Remove mention of command filtering from tcmu-design.txt.
Signed-off-by: Andy Grover <agrover@redhat.com>
Reviewed-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
We now require that the userspace handler set a bit if the command is not
handled.
Update calls to tcmu_hdr_get_op for v2.
Signed-off-by: Andy Grover <agrover@redhat.com>
Reviewed-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
See https://bugzilla.redhat.com/show_bug.cgi?id=1025672
We need to put() the reference to the scsi host that we got in
pscsi_configure_device(). In VIRTUAL_HOST mode it is associated with
the dev_virt, not the hba_virt.
Signed-off-by: Andy Grover <agrover@redhat.com>
Cc: stable@vger.kernel.org # 2.6.38+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
There is just one configfs subsystem in the target code, so we might as
well add two helpers to reference / unreference it from the core code
instead of passing pointers to it around.
This fixes a regression introduced for v4.1-rc1 with commit 9ac8928e6,
where configfs_depend_item() callers using se_tpg_tfo->tf_subsys would
fail, because the assignment from the original target_core_subsystem[]
is no longer happening at target_register_template() time.
(Fix target_core_exit_configfs pointer dereference - Sagi)
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
The following error message is seen when loading the nct6683 driver
with DEBUG_LOCK_ALLOC enabled.
BUG: key ffff88040b2f0030 not in .data!
------------[ cut here ]------------
WARNING: CPU: 0 PID: 186 at kernel/locking/lockdep.c:2988
lockdep_init_map+0x469/0x630()
DEBUG_LOCKS_WARN_ON(1)
Caused by a missing call to sysfs_attr_init() when initializing
sysfs attributes.
Reported-by: Alexey Orishko <alexey.orishko@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Cc: stable@vger.kernel.org # v3.18+
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The following error message is seen when loading the nct6775 driver
with DEBUG_LOCK_ALLOC enabled.
BUG: key ffff88040b2f0030 not in .data!
------------[ cut here ]------------
WARNING: CPU: 0 PID: 186 at kernel/locking/lockdep.c:2988
lockdep_init_map+0x469/0x630()
DEBUG_LOCKS_WARN_ON(1)
Caused by a missing call to sysfs_attr_init() when initializing
sysfs attributes.
Reported-by: Alexey Orishko <alexey.orishko@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Cc: stable@vger.kernel.org # v3.12+
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This fixes a bug uncovered by a recent driver core change that
modified the implementation of the ACPI_COMPANION_SET() macro to
strictly rely on its second argument to be either NULL or a valid
pointer to struct acpi_device.
As it turns out, pcibios_root_bridge_prepare() on x86 and ia64
works with the assumption that the only code path calling
pci_create_root_bus() is pci_acpi_scan_root() and therefore
the sysdata argument passed to it will always match the
expectations of pcibios_root_bridge_prepare(). That need not
be the case, however, and in particular it is not the case for
the Xen pcifront driver that passes a pointer to its own private
data strcture as sysdata to pci_scan_bus_parented() which then
passes it to pci_create_root_bus() and it ends up being used
incorrectly by pcibios_root_bridge_prepare().
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=ulKW
-----END PGP SIGNATURE-----
Merge tag 'acpi-pci-4.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull PCI / ACPI fix from Rafael Wysocki:
"This fixes a bug uncovered by a recent driver core change that
modified the implementation of the ACPI_COMPANION_SET() macro to
strictly rely on its second argument to be either NULL or a valid
pointer to struct acpi_device.
As it turns out, pcibios_root_bridge_prepare() on x86 and ia64 works
with the assumption that the only code path calling pci_create_root_bus()
is pci_acpi_scan_root() and therefore the sysdata argument passed to
it will always match the expectations of pcibios_root_bridge_prepare().
That need not be the case, however, and in particular it is not the
case for the Xen pcifront driver that passes a pointer to its own
private data strcture as sysdata to pci_scan_bus_parented() which then
passes it to pci_create_root_bus() and it ends up being used incorrectly
by pcibios_root_bridge_prepare()"
* tag 'acpi-pci-4.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PCI / ACPI: Do not set ACPI companions for host bridges with parents
Changes in this update:
o regression fix for new rename whiteout code
o regression fixes for new superblock generic per-cpu counter code
o fix for incorrect error return sign introduced in 3.17
o metadata corruption fixes that need to go back to -stable kernels
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQIcBAABAgAGBQJVaO0JAAoJEK3oKUf0dfodd4UQANRdfXnUrpyQGhVS7HFoFoVt
FIQ52pPGbMu72+DqHc+Q41uvgAPe65LFB2VUL6CUGCMExstF72F5+QonzppMgkMo
unPER3eB8ya03SY+Kp+803ZGgzI2Nl2M6w8Kof730/RUk56PTGYIx4eLXd6iZSli
RsYjw8JDbeue5OQo5FPmLCSQ/Kr5ZJXbgWVPyWkKg9aCcXLN5YSJIV3xcMTK9Q2I
LqqODkyatnGc6YxGAKddS7Xzt1ntlZgbe5mndQw04a2g0Lf6emPH5r8b0UJXIu96
advOBX0pEbad4FeFS6Mo5D+nNCaaNP4WzN7wgdb+BYNVw3ss4Ebam7+yY6Gexg6y
bzZOEkk9saL4YeBDgyYICNu7kG4BRVKRQiiX220G6SFXM3nqbl7qBPb3kVFyDpcI
RRuFJ0ZV0kFJ+3IQ4xVnIh6nootceRk/mvZaK5HhLhQLzklpZ8fj4HF3oBDUAnvN
wNd+7GoZy7zldjCkbF4BP3GjUeW+b9ngrCNc+bFXi5cUbdECXAa2krjxyY+MlQF2
veNVVcsoRdfeM0VjJh2/piGJxMWIlRqXdKzPKsfMWnlIaJ6YyslfbSq+2K7LxgGR
Ho3Sjt0oUuPMZ9F/Mjj+XDqwmzgooUHXNyDBxhGXBNBPjApcRLcb2vQ2SrWEmeGJ
vZmC2R1ZoGdBJg8a55BT
=w5SP
-----END PGP SIGNATURE-----
Merge tag 'xfs-for-linus-4.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs
Pull xfs fixes from Dave Chinner:
"This is a little larger than I'd like late in the release cycle, but
all the fixes are for regressions introduced in the 4.1-rc1 merge, or
are needed back in -stable kernels fairly quickly as they are
filesystem corruption or userspace visible correctness issues.
Changes in this update:
- regression fix for new rename whiteout code
- regression fixes for new superblock generic per-cpu counter code
- fix for incorrect error return sign introduced in 3.17
- metadata corruption fixes that need to go back to -stable kernels"
* tag 'xfs-for-linus-4.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs:
xfs: fix broken i_nlink accounting for whiteout tmpfile inode
xfs: xfs_iozero can return positive errno
xfs: xfs_attr_inactive leaves inconsistent attr fork state behind
xfs: extent size hints can round up extents past MAXEXTLEN
xfs: inode and free block counters need to use __percpu_counter_compare
percpu_counter: batch size aware __percpu_counter_compare()
xfs: use percpu_counter_read_positive for mp->m_icount
Two weeks worth of small bug fixes this time, nothing sticking out
this time:
- one defconfig change to adapt to a modified Kconfig symbol
- two fixes for i.MX for backwards compatibility with older DT
files that was accidentally broken
- one regression fix for irq handling on pxa
- three small dt files on omap, and one each for imx and exynos
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=2HQg
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"Two weeks worth of small bug fixes this time, nothing sticking out
this time:
- one defconfig change to adapt to a modified Kconfig symbol
- two fixes for i.MX for backwards compatibility with older DT files
that was accidentally broken
- one regression fix for irq handling on pxa
- three small dt files on omap, and one each for imx and exynos"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: multi_v7_defconfig: Replace CONFIG_USB_ISP1760_HCD by CONFIG_USB_ISP1760
ARM: imx6: gpc: don't register power domain if DT data is missing
ARM: imx6: allow booting with old DT
ARM: dts: set display clock correctly for exynos4412-trats2
ARM: pxa: pxa_cplds: signedness bug in probe
ARM: dts: Fix WLAN interrupt line for AM335x EVM-SK
ARM: dts: omap3-devkit8000: Fix NAND DT node
ARM: dts: am335x-boneblack: disable RTC-only sleep
ARM: dts: fix imx27 dtb build rule
ARM: dts: imx27: only map 4 Kbyte for fec registers
testing from Junichi Nomura and Bart Van Assche.
Also fix a casting bug in dm_merge_bvec() that could cause only a single
page to be added to a bio (Joe identified this while testing dm-cache
writeback).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVaLGPAAoJEMUj8QotnQNa1pcH/3TumkM0rvl1DK7DfWvjgfpp
+h+whWn79lOUzan/AszRvRU4Pwr7symndnJzJ/tqQ76fm8x84obvKa0jFfB9rmlM
sgw45alqB+AKcKAvocsuDIdzy2/K8FHBihccPWhe87AtJRlj57nTOJWO06gzExOp
/AJ/0Vgv3pxUCL2M4XucpQOV8eUg+gpwjDMxuMEsPVzBVYJfuRvNKoERtd9LSCSV
Y5iqdHCJiW0SWesZNrfthAAlReFzqb1c3mq55G0q0C+Z77Jf3TIPBhVfouM4NOKt
wjQoPavzyAEiKfLFy6QFCjhSOXKCI3klqO7zcyzyygVue5UTHICYRJKn7TFtbfU=
=xGAV
-----END PGP SIGNATURE-----
Merge tag 'dm-4.1-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device-mapper fixes from Mike Snitzer:
"Quite a few fixes for DM's blk-mq support thanks to extra DM multipath
testing from Junichi Nomura and Bart Van Assche.
Also fix a casting bug in dm_merge_bvec() that could cause only a
single page to be added to a bio (Joe identified this while testing
dm-cache writeback)"
* tag 'dm-4.1-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: fix casting bug in dm_merge_bvec()
dm: fix reload failure of 0 path multipath mapping on blk-mq devices
dm: fix false warning in free_rq_clone() for unmapped requests
dm: requeue from blk-mq dm_mq_queue_rq() using BLK_MQ_RQ_QUEUE_BUSY
dm mpath: fix leak of dm_mpath_io structure in blk-mq .queue_rq error path
dm: fix NULL pointer when clone_and_map_rq returns !DM_MAPIO_REMAPPED
dm: run queue on re-queue
I2C address 0x37 may be used by EEPROMs, which can result in false
positives. Do not attempt to detect a chip at this address.
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Cc: stable@vger.kernel.org # v4.0+
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Merge misc fixes from Andrew Morton:
"10 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
scripts/gdb: fix lx-lsmod refcnt
omfs: fix potential integer overflow in allocator
omfs: fix sign confusion for bitmap loop counter
omfs: set error return when d_make_root() fails
fs, omfs: add NULL terminator in the end up the token list
MAINTAINERS: update CAPABILITIES pattern
fs/binfmt_elf.c:load_elf_binary(): return -EINVAL on zero-length mappings
tracing/mm: don't trace mm_page_pcpu_drain on offline cpus
tracing/mm: don't trace mm_page_free on offline cpus
tracing/mm: don't trace kmem_cache_free on offline cpus
Two fixes which got lost in my recent distraction. One is a weird
cpumask function which needed to be rewritten, the other is a module
bug which is cc:stable.
Thanks,
Rusty.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=wuP+
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux
Pull fixes for cpumask and modules from Rusty Russell:
"** NOW WITH TESTING! **
Two fixes which got lost in my recent distraction. One is a weird
cpumask function which needed to be rewritten, the other is a module
bug which is cc:stable"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
cpumask_set_cpu_local_first => cpumask_local_spread, lament
module: Call module notifier on failure after complete_formation()
Correct a regression introduced with 8453eebd [MIPS: Fix strnlen_user()
return value in case of overlong strings.] causing assembler warnings
and broken code generated in __strnlen_kernel_nocheck_asm:
arch/mips/lib/strnlen_user.S: Assembler messages:
arch/mips/lib/strnlen_user.S:64: Warning: Macro instruction expanded into multiple instructions in a branch delay slot
with the CPU_DADDI_WORKAROUNDS option set, resulting in the function
looping indefinitely upon mounting NFS root.
Use conditional assembly to avoid a microMIPS code size regression.
Using $at unconditionally would cause such a regression as there are no
16-bit instruction encodings available for ALU operations using this
register. Using $v1 unconditionally would produce short microMIPS
encodings, but would prevent this register from being used across calls
to this function.
The extra LI operation introduced is free, replacing a NOP originally
scheduled into the delay slot of the branch that follows.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10205/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
bmips_wr_vec() copies exception vector code from start to dst.
The call to dma_cache_wback() needs to flush (end-start) bytes,
starting at dst, from write-back cache to memory.
Signed-off-by: Petri Gynther <pgynther@google.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Kevin Cernekee <cernekee@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10193/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Pull drm fixes from Dave Airlie:
"This is made up 4 groups of fixes detailed below.
vgem:
Due to some misgivings about possible bad use cases this allow,
backout a chunk of the interface to stop those use cases for now.
radeon:
Fix for an oops regression in the audio code, and a partial revert
for a fix that was cauing problems.
nouveau:
regression fix for Fermi, and display-less Maxwell boot fixes.
drm core:
a fix for i915 cursor vblank waiting in the atomic helpers"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/nouveau/gr/gm204: remove a stray printk
drm/nouveau/devinit/gm100-: force devinit table execution on boards without PDISP
drm/nouveau/devinit/gf100: make the force-post condition more obvious
drm/nouveau/gr/gf100-: fix wrong constant definition
drm/radeon: partially revert "fix VM_CONTEXT*_PAGE_TABLE_END_ADDR handling"
drm/radeon/audio: make sure connector is valid in hotplug case
Revert "drm/radeon: only mark audio as connected if the monitor supports it (v3)"
drm/radeon: don't share plls if monitors differ in audio support
drm/vgem: drop DRIVER_PRIME (v2)
drm/plane-helper: Adapt cursor hack to transitional helpers
No big surprise here, just a bunch of small fixes for HD-audio and
USB-audio.
- Partial revert of widget power-saving for IDT codecs
- Revert mute-LED enum ctl for Thinkpads due to confusion
- A quirk for a new Radeon HDMI controller
- Realtek codec name fix for Dell
- A workaround for headphone mic boost on some laptops
- stream_pm ops setup (and its fix for regression)
- Another quirk for MS LifeCam USB-audio
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=84pv
-----END PGP SIGNATURE-----
Merge tag 'sound-4.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"No big surprise here, just a bunch of small fixes for HD-audio and
USB-audio:
- partial revert of widget power-saving for IDT codecs
- revert mute-LED enum ctl for Thinkpads due to confusion
- a quirk for a new Radeon HDMI controller
- Realtek codec name fix for Dell
- a workaround for headphone mic boost on some laptops
- stream_pm ops setup (and its fix for regression)
- another quirk for MS LifeCam USB-audio"
* tag 'sound-4.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Fix lost sound due to stream_pm ops cleanup
ALSA: hda - Disable Headphone Mic boost for ALC662
ALSA: hda - Disable power_save_node for IDT92HD71bxx
ALSA: hda - Fix noise on AMD radeon 290x controller
ALSA: hda - Set stream_pm ops automatically by generic parser
ALSA: hda/realtek - Add ALC256 alias name for Dell
Revert "ALSA: hda - Add mute-LED mode control to Thinkpad"
ALSA: usb-audio: Add quirk for MS LifeCam HD-3000
dm_merge_bvec() was originally added in f6fccb ("dm: introduce
merge_bvec_fn"). In that commit a value in sectors is converted to
bytes using << 9, and then assigned to an int. This code made
assumptions about the value of BIO_MAX_SECTORS.
A later commit 148e51 ("dm: improve documentation and code clarity in
dm_merge_bvec") was meant to have no functional change but it removed
the use of BIO_MAX_SECTORS in favor of using queue_max_sectors(). At
this point the cast from sector_t to int resulted in a zero value. The
fallout being dm_merge_bvec() would only allow a single page to be added
to a bio.
This interim fix is minimal for the benefit of stable@ because the more
comprehensive cleanup of passing a sector_t to all DM targets' merge
function will impact quite a few DM targets.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org # 3.19+
dm-multipath accepts 0 path mapping.
# echo '0 2097152 multipath 0 0 0 0' | dmsetup create newdev
Such a mapping can be used to release underlying devices while still
holding requests in its queue until working paths come back.
However, once the multipath device is created over blk-mq devices,
it rejects reloading of 0 path mapping:
# echo '0 2097152 multipath 0 0 1 1 queue-length 0 1 1 /dev/sda 1' \
| dmsetup create mpath1
# echo '0 2097152 multipath 0 0 0 0' | dmsetup load mpath1
device-mapper: reload ioctl on mpath1 failed: Invalid argument
Command failed
With following kernel message:
device-mapper: ioctl: can't change device type after initial table load.
DM tries to inherit the current table type using dm_table_set_type()
but it doesn't work as expected because of unnecessary check about
whether the target type is hybrid or not.
Hybrid type is for targets that work as either request-based or bio-based
and not required for blk-mq or non blk-mq checking.
Fixes: 65803c2059 ("dm table: train hybrid target type detection to select blk-mq if appropriate")
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Unfortunately this functionality was merged a little prematurely.
The necessary testing and code review is now complete (or as
complete as it can be) and to code passes a variety of tests
and looks quite sensible.
Also a fix for some recent locking changes - a race was introduced
which causes a reshape request to sometimes fail. No data safety issues.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=Y0Vm
-----END PGP SIGNATURE-----
Merge tag 'md/4.1-rc5-fixes' of git://neil.brown.name/md
Pull m,ore md bugfixes gfrom Neil Brown:
"Assorted fixes for new RAID5 stripe-batching functionality.
Unfortunately this functionality was merged a little prematurely. The
necessary testing and code review is now complete (or as complete as
it can be) and to code passes a variety of tests and looks quite
sensible.
Also a fix for some recent locking changes - a race was introduced
which causes a reshape request to sometimes fail. No data safety
issues"
* tag 'md/4.1-rc5-fixes' of git://neil.brown.name/md:
md: fix race when unfreezing sync_action
md/raid5: break stripe-batches when the array has failed.
md/raid5: call break_stripe_batch_list from handle_stripe_clean_event
md/raid5: be more selective about distributing flags across batch.
md/raid5: add handle_flags arg to break_stripe_batch_list.
md/raid5: duplicate some more handle_stripe_clean_event code in break_stripe_batch_list
md/raid5: remove condition test from check_break_stripe_batch_list.
md/raid5: Ensure a batch member is not handled prematurely.
md/raid5: close race between STRIPE_BIT_DELAY and batching.
md/raid5: ensure whole batch is delayed for all required bitmap updates.
When stacking request-based dm device on non blk-mq device and
device-mapper target could not map the request (error target is used,
multipath target with all paths down, etc), the WARN_ON_ONCE() in
free_rq_clone() will trigger when it shouldn't.
The warning was added by commit aa6df8d ("dm: fix free_rq_clone() NULL
pointer when requeueing unmapped request"). But free_rq_clone() with
clone->q == NULL is valid usage for the case where
dm_kill_unmapped_request() initiates request cleanup.
Fix this false warning by just removing the WARN_ON -- it only generated
false positives and was never useful in catching the intended case
(completing clone request not being mapped e.g. clone->q being NULL).
Fixes: aa6df8d ("dm: fix free_rq_clone() NULL pointer when requeueing unmapped request")
Reported-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reported-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Since commit 100832abf0 ("usb: isp1760: Make HCD support
optional"), CONFIG_USB_ISP1760_HCD is automatically selected when
needed. Enabling that option in the defconfig is now a no-op, and no
longer enables ISP1760 HCD support.
Re-enable the ISP1760 driver in the defconfig by enabling
USB_ISP1760_HOST_ROLE instead.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
It includes a couple of fixes for i.MX6 GPC code to let the new kernel
be able to boot with old DTBs:
- Booting v4.1-rc kernel with old DTBs will fail with a fat warning
(require low-level debug to be seen), due to the adoption of stacked
IRQ domain. The first fix improves the situation by allowing kernel
boot up with old DTBs, although suspend/resume still breaks.
- Booting new kernel with old DTBs that do not have power-domain info
will result in a hang. The second patch fixes the hang by skipping
the kernel power-domain registration if DTB has no power-domain info.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVZalkAAoJEFBXWFqHsHzOk7YH/iQwidJWob015NvrsqUvQlDb
+dIFmUJNFpGqbkLjINDJv0p13lfksuCQ29F/b0R86+sWsRVS/JUKRkVZ1qh83lc9
8ywiTDUqJBEUApwTaVDDqWr6bbYYHC9TdZ/MqJ85hnF2PnwjBS1Vuv+WQuQe/8ru
7LuTzWyqce8u/cYi/0Zs0Vrtmsz5pjhh7Xg1iWXtamJ43v+yqDP/OwZ5BdSkT+P4
J7WWAojVz4iVG4ftNSdJ1CqGuaFP4iMg+HUoS4ecEsyhe6CMdDoq+I2Fuf1aZweS
6clSe/X2HCi7Gspv9oELsNVEci6AfFR/0Ut6LgvSya8AjxZgdu3cmbdDtbPSQ+o=
=dMJE
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-4.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes
Merge "The i.MX fixes for 4.1, 3rd round" from Shawn Guo:
It includes a couple of fixes for i.MX6 GPC code to let the new kernel
be able to boot with old DTBs:
- Booting v4.1-rc kernel with old DTBs will fail with a fat warning
(require low-level debug to be seen), due to the adoption of stacked
IRQ domain. The first fix improves the situation by allowing kernel
boot up with old DTBs, although suspend/resume still breaks.
- Booting new kernel with old DTBs that do not have power-domain info
will result in a hang. The second patch fixes the hang by skipping
the kernel power-domain registration if DTB has no power-domain info.
* tag 'imx-fixes-4.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx6: gpc: don't register power domain if DT data is missing
ARM: imx6: allow booting with old DT
- Set display clock correctly for exynos4412-trats2
: fix the following error
exynos-drm: No connectors reported connected with modes
[drm] Cannot find any crtc or sizes - going 1024x768
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=U0hO
-----END PGP SIGNATURE-----
Merge tag 'samsung-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes
Merge "Samsung fix for v4.1" from Kukjin Kim:
- Set display clock correctly for exynos4412-trats2
: fix the following error
exynos-drm: No connectors reported connected with modes
[drm] Cannot find any crtc or sizes - going 1024x768
* tag 'samsung-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: dts: set display clock correctly for exynos4412-trats2
The commit [49fb189725: ALSA: hda - Set stream_pm ops automatically
by generic parser] resulted in regressions on some Realtek and VIA
codecs because these drivers set patch_ops after calling the generic
parser, thus stream_pm got cleared to NULL again. I haven't noticed
since I tested with IDT codec.
Restore (partial revert) the stream_pm ops for them to fix the
regression.
Fixes: 49fb189725 ('ALSA: hda - Set stream_pm ops automatically by generic parser')
Reported-by: Jeremiah Mahler <jmmahler@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
when we find that a child has died while we'd been trying to ascend,
we should go into the first live sibling itself, rather than its sibling.
Off-by-one in question had been introduced in "deal with deadlock in
d_walk()" and the fix needs to be backported to all branches this one
has been backported to.
Cc: stable@vger.kernel.org # 3.2 and later
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Commit 2f35c41f58 ("module: Replace module_ref with atomic_t refcnt")
changes the way refcnt is handled but did not update the gdb script to
use the new variable.
Since refcnt is not per-cpu anymore, we can directly read its value.
Signed-off-by: Adrien Schildknecht <adrien+dev@schischi.me>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Pantelis Koukousoulas <pktoss@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Both 'i' and 'bits_per_entry' are signed integers but the result is a
u64 block number. Cast i to u64 to avoid truncation on 32-bit targets.
Found by Coverity (CID 200679).
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The count variable is used to iterate down to (below) zero from the size
of the bitmap and handle the one-filling the remainder of the last
partial bitmap block. The loop conditional expects count to be signed
in order to detect when the final block is processed, after which count
goes negative.
Unfortunately, a recent change made this unsigned along with some other
related fields. The result of is this is that during mount,
omfs_get_imap will overrun the bitmap array and corrupt memory unless
number of blocks happens to be a multiple of 8 * blocksize.
Fix by changing count back to signed: it is guaranteed to fit in an s32
without overflow due to an enforced limit on the number of blocks in the
filesystem.
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A static checker found the following issue in the error path for
omfs_fill_super:
fs/omfs/inode.c:552 omfs_fill_super()
warn: missing error code here? 'd_make_root()' failed. 'ret' = '0'
Fix by returning -ENOMEM in this case.
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
match_token() expects a NULL terminator at the end of the token list so
that it would know where to stop. Not having one causes it to overrun
to invalid memory.
In practice, passing a mount option that omfs didn't recognize would
sometimes panic the system.
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
load_elf_binary() returns `retval', not `error'.
Fixes: a87938b2e2 ("fs/binfmt_elf.c: fix bug in loading of PIE binaries")
Reported-by: James Hogan <james.hogan@imgtec.com>
Cc: Michael Davidson <md@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since tracepoints use RCU for protection, they must not be called on
offline cpus. trace_mm_page_pcpu_drain can be called on an offline cpu
in this scenario caught by LOCKDEP:
===============================
[ INFO: suspicious RCU usage. ]
4.1.0-rc1+ #9 Not tainted
-------------------------------
include/trace/events/kmem.h:265 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
RCU used illegally from offline CPU!
rcu_scheduler_active = 1, debug_locks = 1
1 lock held by swapper/5/0:
#0: (&(&zone->lock)->rlock){..-...}, at: [<c0000000002073b0>] .free_pcppages_bulk+0x70/0x920
stack backtrace:
CPU: 5 PID: 0 Comm: swapper/5 Not tainted 4.1.0-rc1+ #9
Call Trace:
.dump_stack+0x98/0xd4 (unreliable)
.lockdep_rcu_suspicious+0x108/0x170
.free_pcppages_bulk+0x60c/0x920
.free_hot_cold_page+0x208/0x280
.destroy_context+0x90/0xd0
.__mmdrop+0x58/0x160
.idle_task_exit+0xf0/0x100
.pnv_smp_cpu_kill_self+0x58/0x2c0
.cpu_die+0x34/0x50
.arch_cpu_idle_dead+0x20/0x40
.cpu_startup_entry+0x708/0x7a0
.start_secondary+0x36c/0x3a0
start_secondary_prolog+0x10/0x14
Fix this by converting mm_page_pcpu_drain trace point into
TRACE_EVENT_CONDITION where condition is cpu_online(smp_processor_id())
Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com>
Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since tracepoints use RCU for protection, they must not be called on
offline cpus. trace_mm_page_free can be called on an offline cpu in this
scenario caught by LOCKDEP:
===============================
[ INFO: suspicious RCU usage. ]
4.1.0-rc1+ #9 Not tainted
-------------------------------
include/trace/events/kmem.h:170 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
RCU used illegally from offline CPU!
rcu_scheduler_active = 1, debug_locks = 1
no locks held by swapper/1/0.
stack backtrace:
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.1.0-rc1+ #9
Call Trace:
.dump_stack+0x98/0xd4 (unreliable)
.lockdep_rcu_suspicious+0x108/0x170
.free_pages_prepare+0x494/0x680
.free_hot_cold_page+0x50/0x280
.destroy_context+0x90/0xd0
.__mmdrop+0x58/0x160
.idle_task_exit+0xf0/0x100
.pnv_smp_cpu_kill_self+0x58/0x2c0
.cpu_die+0x34/0x50
.arch_cpu_idle_dead+0x20/0x40
.cpu_startup_entry+0x708/0x7a0
.start_secondary+0x36c/0x3a0
start_secondary_prolog+0x10/0x14
Fix this by converting mm_page_free trace point into TRACE_EVENT_CONDITION
where condition is cpu_online(smp_processor_id())
Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com>
Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since tracepoints use RCU for protection, they must not be called on
offline cpus. trace_kmem_cache_free can be called on an offline cpu in
this scenario caught by LOCKDEP:
===============================
[ INFO: suspicious RCU usage. ]
4.1.0-rc1+ #9 Not tainted
-------------------------------
include/trace/events/kmem.h:148 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
RCU used illegally from offline CPU!
rcu_scheduler_active = 1, debug_locks = 1
no locks held by swapper/1/0.
stack backtrace:
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.1.0-rc1+ #9
Call Trace:
.dump_stack+0x98/0xd4 (unreliable)
.lockdep_rcu_suspicious+0x108/0x170
.kmem_cache_free+0x344/0x4b0
.__mmdrop+0x4c/0x160
.idle_task_exit+0xf0/0x100
.pnv_smp_cpu_kill_self+0x58/0x2c0
.cpu_die+0x34/0x50
.arch_cpu_idle_dead+0x20/0x40
.cpu_startup_entry+0x708/0x7a0
.start_secondary+0x36c/0x3a0
start_secondary_prolog+0x10/0x14
Fix this by converting kmem_cache_free trace point into
TRACE_EVENT_CONDITION where condition is cpu_online(smp_processor_id())
Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com>
Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Regression fix for Fermi acceleration, and fixes important to bringing
up display-less Maxwell boards.
* 'linux-4.1' of git://anongit.freedesktop.org/git/nouveau/linux-2.6:
drm/nouveau/gr/gm204: remove a stray printk
drm/nouveau/devinit/gm100-: force devinit table execution on boards without PDISP
drm/nouveau/devinit/gf100: make the force-post condition more obvious
drm/nouveau/gr/gf100-: fix wrong constant definition
