Commit Graph

22385 Commits

Author SHA1 Message Date
Paul Mackerras
2a5f2e3e6c Merge branch 'for-2.6.26' of master.kernel.org:/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx into merge 2008-05-09 20:12:06 +10:00
Paul Mundt
f11c9c2fd9 sh: update smc91x platform data for se7206.
Follows the se7722 change.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-09 14:13:17 +09:00
Linus Torvalds
28a4acb485 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (32 commits)
  net: Added ASSERT_RTNL() to dev_open() and dev_close().
  can: Fix can_send() handling on dev_queue_xmit() failures
  netns: Fix arbitrary net_device-s corruptions on net_ns stop.
  netfilter: Kconfig: default DCCP/SCTP conntrack support to the protocol config values
  netfilter: nf_conntrack_sip: restrict RTP expect flushing on error to last request
  macvlan: Fix memleak on device removal/crash on module removal
  net/ipv4: correct RFC 1122 section reference in comment
  tcp FRTO: SACK variant is errorneously used with NewReno
  e1000e: don't return half-read eeprom on error
  ucc_geth: Don't use RX clock as TX clock.
  cxgb3: Use CAP_SYS_RAWIO for firmware
  pcnet32: delete non NAPI code from driver.
  fs_enet: Fix a memory leak in fs_enet_mdio_probe
  [netdrvr] eexpress: IPv6 fails - multicast problems
  3c59x: use netstats in net_device structure
  3c980-TX needs EXTRA_PREAMBLE
  fix warning in drivers/net/appletalk/cops.c
  e1000e: Add support for BM PHYs on ICH9
  uli526x: fix endianness issues in the setup frame
  uli526x: initialize the hardware prior to requesting interrupts
  ...
2008-05-08 19:03:26 -07:00
Linus Torvalds
89f92d6425 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc: Fix SA_ONSTACK signal handling.
2008-05-08 19:03:19 -07:00
Linus Torvalds
8d53910856 Revert "PCI: remove default PCI expansion ROM memory allocation"
This reverts commit 9f8daccaa0, which was
reported to break X startup (xf86-video-ati-6.8.0). See

	http://bugs.freedesktop.org/show_bug.cgi?id=15523

for details.

Reported-by: Laurence Withers <l@lwithers.me.uk>
Cc: Gary Hade <garyhade@us.ibm.com>
Cc: Greg KH <greg@kroah.com>
Cc: Jan Beulich <jbeulich@novell.com>
Cc: "Jun'ichi Nomura" <j-nomura@ce.jp.nec.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-08 19:02:55 -07:00
Linus Torvalds
f589274533 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  [ALSA] soc at91 minor bug fixes
  [ALSA] soc - at91-pcm - Fix line wrapping
  pcspkr: fix dependancies
2008-05-08 10:58:45 -07:00
Linus Torvalds
da1ba891f2 Merge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
  [S390] guest page hinting light
  [S390] tty3270: fix put_char fail/success conversion.
  [S390] compat ptrace cleanup
  [S390] s390mach compile warning
  [S390] cio: Fix parsing mechanism for blacklisted devices.
  [S390] cio: Remove cio_msg kernel parameter.
  [S390] s390-kvm: leave sie context on work. Removes preemption requirement
  [S390] s390: Optimize user and work TIF check
2008-05-08 10:47:39 -07:00
Ulrich Drepper
ba719baeab sys_pipe(): fix file descriptor leaks
Remember to close the files if copy_to_user() failed.

Spotted by dm.n9107@gmail.com.

Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Cc: DM <dm.n9107@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-08 10:46:56 -07:00
WANG Cong
3168cb98be uml: fix inconsistence due to tty_operation change
'put_char' of 'struct tty_operations' has changed from 'void' into 'int'.
This can also shut up compiler warnings.

Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: WANG Cong <wangcong@zeuux.org>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-08 10:46:55 -07:00
Russell King
dc38e2ad53 [ARM] pxa: Fix RCSR handling
Related to d3930614e6.

RCSR is only present on PXA2xx CPUs, not on PXA3xx CPUs.  Therefore,
we should not be unconditionally writing to RCSR from generic code.

Since we now clear the RCSR status from the SoC specific PXA PM code
and before reset in the arch_reset() function, the duplication in
the corgi, poodle, spitz and tosa code can be removed.

Acked-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-05-08 18:04:02 +01:00
Thomas Gleixner
8d4a430085 x86: cleanup PAT cpu validation
Move the scattered checks for PAT support to a single function. Its
moved to addon_cpuid_features.c as this file is shared between 32 and
64 bit.

Remove the manipulation of the PAT feature bit and just disable PAT in
the PAT layer, based on the PAT bit provided by the CPU and the
current CPU version/model white list.

Change the boot CPU check so it works on Voyager somewhere in the
future as well :) Also panic, when a secondary has PAT disabled but
the primary one has alrady switched to PAT. We have no way to undo
that.

The white list is kept for now to ensure that we can rely on known to
work CPU types and concentrate on the software induced problems
instead of fighthing CPU erratas and subtle wreckage caused by not yet
verified CPUs. Once the PAT code has stabilized enough, we can remove
the white list and open the can of worms.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-08 15:43:51 +02:00
Andres Salomon
547acec7ec x86: GEODE: cache results from geode_has_vsa2() and uninline
This moves geode_has_vsa2 into a .c file, caches the result we get from
the VSA virtual registers, and causes the function to no longer be inline.

[akpm@linux-foundation.org: cleanup]

Signed-off-by: Andres Salomon <dilinger@debian.org>
Cc: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-08 15:43:50 +02:00
Thomas Gleixner
ac44cc96fb x86: revert geode config dependency
commit e26a28d190
    x86: olpc build fix

was a fix to a patch that was withdrawn/delayed and then erroneously
commited to x86.git. Revert it.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-08 15:43:50 +02:00
Alexey Dobriyan
ffebabe0bf [ARM] lubbock: fix compilation
arch/arm/mach-pxa/lubbock.c:399: error: expected '}' before ';' token

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-05-08 10:58:39 +01:00
Christoph Hellwig
02539d71fa [POWERPC] spufs: lockdep annotations for spufs_dir_close
We need to acquire the parent i_mutex with I_MUTEX_PARENT to keep
lockdep happy.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-05-08 15:29:12 +10:00
Christoph Hellwig
7a28a1549f [POWERPC] spufs: don't requeue victim contex in find_victim if it's not in spu_run
We should not requeue the victim context in find_victim if the owner is
not in spu_run. It's first not needed because leaving the context on
the spu is an optimization and second is harmful because it means the
owner could re-enter spu_run when the context is on the runqueue and
trip the BUG_ON in __spu_update_sched_info.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-05-08 15:26:32 +10:00
Magnus Damm
4370fe1c06 sh: intc register modify fix
Make sure register modifications stay atomic. Fixes processors with
shared priority register masking. Dual bitmap masking is unaffected.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08 19:52:07 +09:00
Magnus Damm
720be99006 sh: no high level trigger on some sh3 cpus
The processor models sh7706, sh7707 and sh7709 don't support high
level trigger sense configuration. And the intc code looks like
crap these days so what's the difference.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08 19:52:06 +09:00
Magnus Damm
995d538a5b sh: clean up sh7710 and sh7720 intc tables
Clean up the intc tables by removing unneeded #ifdefs. The vector
list is what selects which interrupt sources that should be added,
having unsupported bitfields listed is ok as long as the vector
is excluded from the list.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08 19:52:04 +09:00
Magnus Damm
d58876e289 sh: add interrupt ack code to sh3
This patch adds interrupt acknowledge code for external interrupt
sources on sh3 processors. Only really required for edge triggered
interrupts, but we ack regardless of sense configuration.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08 19:52:03 +09:00
Magnus Damm
a276e588a9 sh: unify external irq pin code for sh3
This patch unifies the sh3 external irq pin code. It buys us some
savings with reduced code redundancy, but the main feature with
this change is irq sense selection support for all sh3 processors.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08 19:52:00 +09:00
Magnus Damm
191d4437b9 sh: reset hardware from early printk
Reset the transmitter and receiver when setting up early printk.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08 19:51:54 +09:00
Magnus Damm
4a65e3827b sh: drain and wait for early printk
Drain by waiting for all characters to be sent, and make sure to
wait a little bit after setting up the baud rate.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08 19:51:53 +09:00
Magnus Damm
0fba321365 sh: use sci_out() for early printk
Use sci_out() instead of ctrl_outw() for early printk setup code.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08 19:51:52 +09:00
Magnus Damm
0146ba78b9 sh: add memory resources to /proc/iomem
Add physical memory resources such as System RAM, Kernel code/data/bss
and reserved crash dump area to /proc/iomem. Same strategy as on x86.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08 19:51:51 +09:00
Magnus Damm
3d83984e99 sh: add kernel bss resource
Do like everyone else and have a struct resource for kernel bss.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08 19:51:49 +09:00
Magnus Damm
65c07d4b3d sh: fix sh7705 interrupt vector typo
Fix sh7705 interrupt sources for vectors 0xc80 and 0xca0.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08 19:51:48 +09:00
Magnus Damm
57b84f2b67 sh: update smc91x platform data for se7722
Select smc91x bus width using platform data for se7722 now when the
smc91x header file is in place.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08 19:51:48 +09:00
Magnus Damm
8a3ee0fc8f sh: update smc91x platform data for MigoR
Select smc91x bus width and irg flags using platform data for MigoR
now when the smc91x header file is in place.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08 19:51:47 +09:00
Mathieu Desnoyers
8cd9612e9b sh: remove -traditional.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
CC: Sam Ravnborg <sam@ravnborg.org>
CC: linux-sh@vger.kernel.org
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08 19:51:46 +09:00
Paul Mundt
ae8a5348ac sh: r7780rp: Kill off unneded ifdefs for irq setup.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08 19:51:44 +09:00
Paul Mundt
e305ec80ea sh: rts7751r2d: Kill off unneeded ifdefs.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08 19:51:43 +09:00
Paul Mundt
a1dc4b59fa sh: intc_sh5 depends on cayman board for IRQ priority table.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08 19:51:43 +09:00
Paul Mundt
5e2c2872bd sh64: export onchip_remap/unmap() too.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08 19:51:41 +09:00
Paul Mundt
971ac16d56 sh64: Some symbol exports to make the allmodconfig happier.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08 19:51:41 +09:00
Adrian Bunk
f5f826c685 sh: remove the broken SH_MPC1211 support
SH_MPC1211 has been marked as BROKEN for some time.

Unless someone is working on reviving it now, I'd therefore suggest this
patch to remove it.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08 19:51:39 +09:00
Paul Mundt
2a6b8148c0 sh64: Setup I/D-TLB defaults in SH-5 probe path.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08 19:51:38 +09:00
Paul Mundt
640f7487a9 sh: kexec and kdump depend on SUPERH32.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08 19:51:37 +09:00
Paul Mundt
824fcdded0 sh64: Fix up compile warning in event tracer.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08 19:51:37 +09:00
Paul Mundt
ccd8058741 sh64: Fixup the nommu build.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08 19:51:37 +09:00
Paul Mundt
9141d30a48 sh64: fixups for xtime_lock seqlock conversion.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08 19:51:36 +09:00
Paul Mundt
1a013e2ffc sh: sh-bios depends on SUPERH32.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08 19:51:35 +09:00
David S. Miller
dc5dc7e6d7 sparc: Fix SA_ONSTACK signal handling.
We need to be more liberal about the alignment of the buffer given to
us by sigaltstack().  The user should not need to be mindful of all of
the alignment constraints we have for the stack frame.

This mirrors how we handle this situation in clone() as well.

Also, we align the stack even in non-SA_ONSTACK cases so that signals
due to bad stack alignment can be delivered properly.  This makes such
errors easier to debug and recover from.

Finally, add the sanity check x86 has to make sure we won't overflow
the signal stack.

This fixes glibc testcases nptl/tst-cancel20.c and
nptl/tst-cancelx20.c

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-07 18:54:05 -07:00
Linus Torvalds
3de2403e66 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc: Fix fork/clone/vfork system call restart.
  sparc: Fix mmap VA span checking.
2008-05-07 17:04:49 -07:00
David S. Miller
1e38c126c9 sparc: Fix fork/clone/vfork system call restart.
We clobber %i1 as well as %i0 for these system calls,
because they give two return values.

Therefore, on error, we have to restore %i1 properly
or else the restart explodes since it uses the wrong
arguments.

This fixes glibc's nptl/tst-eintr1.c testcase.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-07 16:21:28 -07:00
Russell King
d9cadb0d2f Merge branch 'irq-fix' of git://www.modarm9.com/gitsrc/pub/people/ukleinek/linux-2.6.git 2008-05-07 21:55:01 +01:00
Robert Jarzmik
592eb9997d [ARM] 5032/1: Added cpufreq support for pxa27x CPU
PXA cpus maximum frequency depends on the cpu (624 for
pxa270, 520 for pxa272, 416 for pxa271). It should be
provided on kernel or module start (cpu-pxa
pxa27x_maxfreq parameter).

Make use of cpufreq_frequency_table_cpuinfo (patch by Bill
Reese provided by Philipp Zabel).

Some additionnal fixes from Philipp Zabel include :
 * rename PXA cpufreq driver to reflect added PXA27x support
 * remove unused variable ramstart from PXA cpufreq driver

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Robert Jarzmik <rjarzmik@free.fr>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-05-07 21:47:40 +01:00
Robert Jarzmik
3679389b88 [ARM] 5031/1: Indentation correction in cpu-pxa.c.
These indentation corrections prepare the pxa27x support.

Signed-off-by: Robert Jarzmik <rjarzmik@free.fr>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-05-07 21:47:39 +01:00
Davide Rizzo
bdd0f5f06e [ARM] 4882/2: Correction for S3C2410 clkout generation
This is a correction for 2 small bugs for the Samsung S3C2410 ARM9 SoC
clocks generator

Signed-off-by: Davide Rizzo <davide@elpa.it>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-05-07 21:44:43 +01:00
Stas Sergeev
e5e1d3cb20 pcspkr: fix dependancies
fix pcspkr dependancies: make the pcspkr platform
drivers to depend on a platform device, and
not the other way around.

Signed-off-by: Stas Sergeev <stsp@aknet.ru>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
CC: Vojtech Pavlik <vojtech@suse.cz>
CC: Michael Opdenacker <michael-lists@free-electrons.com>
[fixed for 2.6.26-rc1 by tiwai]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-05-07 12:42:03 +02:00
David S. Miller
5816339310 sparc: Fix mmap VA span checking.
We should not conditionalize VA range checks on MAP_FIXED.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-07 02:24:28 -07:00
Martin Schwidefsky
45e576b1c3 [S390] guest page hinting light
Use the existing arch_alloc_page/arch_free_page callbacks to do
the guest page state transitions between stable and unused.

Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-05-07 09:23:02 +02:00
Roland McGrath
b499d76bfd [S390] compat ptrace cleanup
This removes redundant arch code for generic ptrace requests
already handled by ptrace_request and compat_ptrace_request.
It simplifies things to just have the standard entry points,
and use the generic compat_sys_ptrace.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-05-07 09:23:02 +02:00
Christian Borntraeger
0eaeafa10f [S390] s390-kvm: leave sie context on work. Removes preemption requirement
From: Martin Schwidefsky <schwidefsky@de.ibm.com>

This patch fixes a bug with cpu bound guest on kvm-s390. Sometimes it
was impossible to deliver a signal to a spinning guest. We used
preemption as a circumvention. The preemption notifiers called
vcpu_load, which checked for pending signals and triggered a host
intercept. But even with preemption, a sigkill was not delivered
immediately.

This patch changes the low level host interrupt handler to check for the
SIE  instruction, if TIF_WORK is set. In that case we change the
instruction pointer of the return PSW to rerun the vcpu_run loop. The kvm
code sees an intercept reason 0 if that happens. This patch adds accounting
for these types of intercept as well.

The advantages:
- works with and without preemption
- signals are delivered immediately
- much better host latencies without preemption

Acked-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-05-07 09:23:01 +02:00
Martin Schwidefsky
2688905e6a [S390] s390: Optimize user and work TIF check
On return from syscall or interrupt, we have to check if we return to
userspace (likely) and if there is work todo (less likely) to decide
if we handle the work. We can optimize this check: we first check for
the less likely work case and then check for userspace.

This patch is also a preparation for an additional patch, that fixes a bug
in KVM dealing with cpu bound guests.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-05-07 09:23:00 +02:00
Mike Frysinger
e4f7c0bf1f [Blackfin] arch: protect linux/usb/musb.h include until the driver gets mainlined
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-10 00:08:12 +08:00
Mike Frysinger
b964c592d4 [Blackfin] arch: protect linux/usb/isp1362.h include until the driver gets mainlined
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-10 00:06:10 +08:00
Michael Hennerich
197fba5686 [Blackfin] arch: add EBIU supporting for BF54x EZKIT SMSC LAN911x/LAN921x families embedded ethernet driver
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-07 17:03:27 +08:00
Grace Pan
d7323696a9 [Blackfin] arch: Set spi flash partition on bf527 as like bf548.
Signed-off-by: Grace Pan <grace.pan@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-07 11:41:26 +08:00
Meihui Fan
96a87e2f15 [Blackfin] arch: fix bug - Remove module will not free L1 memory used
Remove module will not free L1 memory used which caused by
memory access after free.  This patch fixes it.

Signed-off-by: Meihui Fan <mhfan@hhcn.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-07 11:41:26 +08:00
Mike Frysinger
60c05953c1 [Blackfin] arch: fix wrong header name in comment
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-07 11:41:26 +08:00
Michael Hennerich
b9c9e78894 [Blackfin] arch: Fix BUG - spi flash on bf527 ezkit would fail at mount
BF527-EZKit features 16MBit M25P16 flash

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-07 11:41:26 +08:00
Bryan Wu
72268689cf [Blackfin] arch: add twi_lcd and twi_keypad i2c board info to bf527-ezkit
- JP3 should be installed for STAMP enable
 - IRQ for twi_keypad driver is IRQ_PF8

Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-07 11:41:26 +08:00
Michael Hennerich
d7e5dd41e3 [Blackfin] arch: Add physmap partition for BF527-EZkit
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-07 11:41:26 +08:00
Bernd Schmidt
0893f1250f [Blackfin] arch: fix gdb testing regression
When transferring to IRQ5 from an exception, save SYSCFG in memory across the
transfer and clear the trace bit.

When we get a single step exception, check whether we can safely clear the
trace bit in SYSCFG.  We can (and should) clear it after the first instruction
of the interrupt handler; the first insn saves SYSCFG to the stack in all
handlers.

Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-07 11:41:26 +08:00
Bernd Schmidt
8513c42edb [Blackfin] arch: disable single stepping when delivering a signal
When delivering a signal, disable single stepping but call
ptrace_notify if it was enabled before. The idea was taken
from the x86 port.

Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-07 11:41:26 +08:00
Bernd Schmidt
7d39270d31 [Blackfin] arch: Delete unused (copied from m68k) entries in asm-offsets.c.
Fix some really ancient code that was correct only for the m68k port.
Delete unused (i.e. copied from m68k) entries in asm-offsets.c.

Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-07 11:41:26 +08:00
Bernd Schmidt
ddb3f00ca0 [Blackfin] arch: In the double fault handler, set up the PT_RETI slot
In the double fault handler, set up the PT_RETI slot so that
we print out the correct return address in the dumping code.

Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-07 11:41:26 +08:00
Vitja Makarov
1bfb4b21c7 [Blackfin] arch: Support for CPU_FREQ and NOHZ
Singed-off-by: Vitja Makarov <vitja.makarov@gmail.com>
2008-05-07 11:41:26 +08:00
Michael Hennerich
14b03204c8 [Blackfin] arch: Functional power management support: Add CPU and platform voltage scaling support
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-07 11:41:26 +08:00
Bernd Schmidt
19d6d7d53c [Blackfin] arch: fix bug - breaking the atomic sections code.
The following cleanup patch:
  add __user markings to a few userspace system functions

mysteriously added a "&" operator that doesn't belong in there, breaking the
atomic sections code.

Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-07 11:41:26 +08:00
Michael Hennerich
67dea022d8 [Blackfin] arch: Cleanup Kconfig, fix comment and make sure we exclude CCLK=SCLK for some configurations
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-07 11:41:26 +08:00
Linus Torvalds
bd1d23a810 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc64: Fix initrd regression.
  usb: Sparc build fix, make USB_ISP1760_OF depend on PPC_OF
  sparc64: remove online_page()
  sparc64: use compat_sys_utimes instead of home-grown local copy.
  sbus: Fix bpp driver build.
  sparc video: make blank use proper constant
  Revert "[SPARC64]: Wrap SMP IPIs with irq_enter()/irq_exit()."
  sparc: tcx.c remove unnecessary function
2008-05-06 18:18:43 -07:00
Linus Torvalds
c0a18111e5 Revert "uml: fix gcc problem"
This reverts commit 22eecde2f9.  Uli
reports that it breaks UML on x86-64 with the Fedora 8 gcc (gcc 4.1.2),
causing a crash on startup. See

	http://marc.info/?l=linux-kernel&m=121011722806093&w=2

for a trace.

Reported-by: Ulrich Drepper <drepper@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-06 17:09:27 -07:00
David S. Miller
d45100f7b6 sparc64: Fix initrd regression.
We die because we forget to convert initrd_start and
initrd_end to virtual addresses.

Reported by Mikael Pettersson

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-06 15:19:54 -07:00
Hugh Dickins
aeed5fce37 x86: fix PAE pmd_bad bootup warning
Fix warning from pmd_bad() at bootup on a HIGHMEM64G HIGHPTE x86_32.

That came from 9fc34113f6 x86: debug pmd_bad();
but we understand now that the typecasting was wrong for PAE in the previous
version: pagetable pages above 4GB looked bad and stopped Arjan from booting.

And revert that cded932b75 x86: fix pmd_bad
and pud_bad to support huge pages.  It was the wrong way round: we shouldn't
weaken every pmd_bad and pud_bad check to let huge pages slip through - in
part they check that we _don't_ have a huge page where it's not expected.

Put the x86 pmd_bad() and pud_bad() definitions back to what they have long
been: they can be improved (x86_32 should use PTE_MASK, to stop PAE thinking
junk in the upper word is good; and x86_64 should follow x86_32's stricter
comparison, to stop thinking any subset of required bits is good); but that
should be a later patch.

Fix Hans' good observation that follow_page() will never find pmd_huge()
because that would have already failed the pmd_bad test: test pmd_huge in
between the pmd_none and pmd_bad tests.  Tighten x86's pmd_huge() check?
No, once it's a hugepage entry, it can get quite far from a good pmd: for
example, PROT_NONE leaves it with only ACCESSED of the KERN_PGTABLE bits.

However... though follow_page() contains this and another test for huge
pages, so it's nice to keep it working on them, where does it actually get
called on a huge page?  get_user_pages() checks is_vm_hugetlb_page(vma) to
to call alternative hugetlb processing, as does unmap_vmas() and others.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Earlier-version-tested-by: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jeff Chua <jeff.chua.linux@gmail.com>
Cc: Hans Rosenfeld <hans.rosenfeld@amd.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-06 13:08:58 -07:00
Christian Ehrhardt
78be76476a [POWERPC] 4xx: Fix PCI mem in sequoia DTS
This patch is fixes the sequoia.dts device tree file to use the values defined
in the 440Epx data sheet from AMCC.

That fixes an issue where some devices, including graphics cards, would not
initialize properly because the PCI resource space was not big enough.

Signed-off-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-05-06 12:37:15 -05:00
Stefan Roese
80daac3f86 [POWERPC] 4xx: Add endpoint support to 4xx PCIe driver
This patch adds basic endpoint support to the 4xx PCIe driver.

This is done by checking the device_type property of the PCIe
device node ("pci" for root-complex and "pci-endpoint" for endpoint
configuration).

Note: Currently we map a fixed 64MByte window to PLB address 0 (SDRAM).
This should probably be configurable via a dts property.

Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-05-06 12:10:43 -05:00
Jeff Garzik
54c852a2d6 Merge branch 'for-2.6.26' of git://git.farnsworth.org/dale/linux-2.6-mv643xx_eth into upstream 2008-05-06 12:22:03 -04:00
Stefan Roese
a96df496ed [POWERPC] 4xx: Fix problem with new TLB storage attibute fields on 440x6 core
The new 440x6 core used on AMCC 460EX/GT introduces new storage attibure
fields to the TLB2 word. Those are:

Bit  11   12   13   14   15
     WL1  IL1I IL1D IL2I IL2D

With these bits the cache (L1 and L2) can be configured in a more flexible
way, instruction- and data-cache independently now. The "old" I and W bits
are still available and setting these old bits will automically set these
new bits too (for backward compatibilty).

The current code does not clear these fields resulting in disabling the cache
by chance. This patch now makes sure that these new bits are cleared when
the TLB2 word is written.

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-05-06 10:36:20 -05:00
Linus Torvalds
bb896afe20 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched-fixes
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched-fixes:
  sched: default to n for GROUP_SCHED and FAIR_GROUP_SCHED
  sched: add optional support for CONFIG_HAVE_UNSTABLE_SCHED_CLOCK
  sched, x86: add HAVE_UNSTABLE_SCHED_CLOCK
  sched: fix cpu clock
  sched: fair-group: fix a Div0 error of the fair group scheduler
  sched: fix missing locking in sched_domains code
  sched: make clock sync tunable by architecture code
  sched: fix debugging
  sched: fix sched_info_switch not being called according to documentation
  sched: fix hrtick_start_fair and CPU-Hotplug
  sched: fix SCHED_FAIR wake-idle logic error
  sched: fix RT task-wakeup logic
  sched: add statics, don't return void expressions
  sched: add debug checks to idle functions
  sched: remove old sched doc
  sched: make rt_sched_class, idle_sched_class static
  sched: optimize calc_delta_mine()
  sched: fix normalized sleeper
2008-05-05 17:31:14 -07:00
Christoph Hellwig
826be063ee [POWERPC] spufs: spu_create should send inotify IM_CREATE event
Creating a spufs context or gand using spu_create should send an inotify
event so that things like performance monitors have an easy way to find
out about newly created contexts.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-05-06 09:24:24 +10:00
Linus Torvalds
2e83fc4df5 Merge branch 'powerpc-next' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'powerpc-next' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] Assign PDE->data before gluing PDE into /proc tree
  [POWERPC] devres: Add devm_ioremap_prot()
  [POWERPC] macintosh: ADB driver: adb_handler_sem semaphore to mutex
  [POWERPC] macintosh: windfarm_smu_sat: semaphore to mutex
  [POWERPC] macintosh: therm_pm72: driver_lock semaphore to mutex
2008-05-05 15:48:53 -07:00
Ingo Molnar
a5574cf65b sched, x86: add HAVE_UNSTABLE_SCHED_CLOCK
add the HAVE_UNSTABLE_SCHED_CLOCK, for architectures to select.

the next change utilizes it.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-05 23:56:18 +02:00
Linus Torvalds
108c196184 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  x86 PCI: call dmi_check_pciprobe()
  x86/pci: add pci=skip_isa_align command lines.
  x86/pci: remove flag in pci_cfg_space_size_ext
  x86: fix section mismatch in pci_scan_bus
2008-05-05 12:39:10 -07:00
Adrian Bunk
abdefbdbd5 sparc64: remove online_page()
The identical online_page() implementations from all architectures got 
moved to mm/memory_hotplug.c - except for the sparc64 one that even was 
dead code due to MEMORY_HOTPLUG not being available there.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-05 12:38:58 -07:00
Finn Thain
b6d9d267f0 m68k: remove old mac_esp cruft
Remove the rest of the old mac_esp driver. Also ditch the rest of the
machw mechanism, it needs to be replaced by a fake openfirmware tree.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-05 12:38:50 -07:00
Roman Zippel
3b17f136bf m68k: Handle 68040 bus faults
Fix 68040 bus fault handling, so the standard kernel exception handling
can be used for i/o probing.

Contrary to normal access faults there is nothing to fix, but at least
we have to disable writebacks to avoid recursive faults.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-05 12:38:50 -07:00
David S. Miller
8376005ea4 sparc64: use compat_sys_utimes instead of home-grown local copy.
Noticed by Christoph Hellwig.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-05 12:32:39 -07:00
Yinghai Lu
0df18ff366 x86 PCI: call dmi_check_pciprobe()
this change:

| commit 08f1c192c3
| Author: Muli Ben-Yehuda <muli@il.ibm.com>
| Date:   Sun Jul 22 00:23:39 2007 +0300
|
|    x86-64: introduce struct pci_sysdata to facilitate sharing of ->sysdata
|
|    This patch introduces struct pci_sysdata to x86 and x86-64, and
|    converts the existing two users (NUMA, Calgary) to use it.
|
|    This lays the groundwork for having other users of sysdata, such as
|    the PCI domains work.
|
|    The Calgary bits are tested, the NUMA bits just look ok.

replaces pcibios_scan_root with pci_scan_bus_parented...

but in pcibios_scan_root we have a DMI check:

    dmi_check_system(pciprobe_dmi_table);

when when have several peer root buses this could be called multiple
times (which is bad), so move that call to pci_access_init().

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-05-05 09:24:00 -07:00
Yinghai Lu
13a6ddb08e x86/pci: add pci=skip_isa_align command lines.
so we don't align the io port start address for pci cards.

also move out dmi check out acpi.c, because it has nothing to do with acpi.
it could spare some calling when we have several peer root buses.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-05-05 09:22:08 -07:00
Denis V. Lunev
9185ef6787 [POWERPC] Assign PDE->data before gluing PDE into /proc tree
Simply replace proc_create and further data assigned with proc_create_data.
No need to check for data!=NULL after that.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Cc: Alexey Dobriyan <adobriyan@openvz.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-05 16:47:14 +10:00
Emil Medve
b41e5fffe8 [POWERPC] devres: Add devm_ioremap_prot()
We provide an ioremap_flags, so this provides a corresponding
devm_ioremap_prot.  The slight name difference is at Ben
Herrenschmidt's request as he plans on changing ioremap_flags to
ioremap_prot in the future.

Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Tejun Heo <htejun@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-05 16:47:14 +10:00
Luke Browning
de1028927a [POWERPC] spufs: handle faults while the context switch pending flag is set
Currently, page fault handlers don't issue a mfc restart if the context
switch pending flag is set, which can leave us with a hanging DMA after
a context restore.

This patch introduces fault pending flag that is set by the fault
handler and read by the context switch code, so that the latter can add
the restart bit at the right spot, after it has successfuly saved the
state of the mfc control register.

Signed-off-by: Luke Browning <lukebr@linux.vnet.ibm.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-05-05 13:33:44 +10:00
Luke Browning
f3d69e0507 [POWERPC] spufs: fix concurrent delivery of class 0 & 1 exceptions
SPU class 0 & 1 exceptions may occur in parallel, so we may end up
overwriting csa.dsisr.

This change adds dedicated fields for each class to the spu and the spu
context so that fault data is not overwritten.

Signed-off-by: Luke Browning <lukebr@linux.vnet.ibm.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-05-05 13:33:44 +10:00
Luke Browning
7a2142002f [POWERPC] spufs: try to route SPU interrupts to local node
Currently, we re-route SPU interrupts to the current cpu, which may be
on a remote node. In the case of time slicing, all spu interrupts will
end up routed to the same cpu, where the spusched_tick occurs.

This change routes mfc interrupts to the cpu where the controlling
thread last ran, provided that cpu is on the same node as the spu
(otherwise don't reroute interrupts).

This should improve performance and provide a more predictable
environment for processing spu exceptions. In the past we have seen
concurrent delivery of spu exceptions to two cpus. This eliminates that
concern.

Signed-off-by: Luke Browning <lukebr@linux.vnet.ibm.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-05-05 13:33:43 +10:00
Luke Browning
093c16bf9b [POWERPC] spufs: set SPU_CONTEXT_SWITCH_PENDING before synchronising SPU irqs
synchronize_irq() provides the serialization for
SPU_CONTEXT_SWITCH_PENDING which is read with a simple load. This
routine guarantees that the relevant interrupt handlers are not running,
so that the next time they do run they will see the update
memory value.

This must be done correctly so that exception handling code does not
restart the mfc in the middle of a context switch while we are trying
to atomically stop it and save state.

Signed-off-by: Luke Browning <lukebr@linux.vnet.ibm.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-05-05 13:33:43 +10:00
Jeremy Kerr
d29694f068 [POWERPC] spufs: don't acquire state_mutex interruptible while performing callback
There's currently no way to tell if spu_process_callback has
returned with the state mutex held, as -EINTR may be returned
by either the syscall or the spu_acquire fail case.

Instead, just do a non-interruptible mutex_lock here.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-05-05 13:33:43 +10:00
Jeremy Kerr
c0bace5c70 [POWERPC] spufs: update master runcntl with context lock held
Currently, we update the SPU master run control bit (ie,
spu_enable_spu) in spufs_run_spu before we grab the context mutex. This
can result in races with other processes accessing this context's
resources.

This change moves the spu_enable_spu to after we have acquired the
context lock.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-05-05 13:33:43 +10:00
Jeremy Kerr
55d7cd74d4 [POWERPC] spufs: fix post-stopped update of MFC_CNTL register
We currently have two issues with the MFC save code:

 * save_mfc_decr doesn't handle a transition of 1 -> 0 of the Ds bit
 * The Q bit may be stale in the CSA

This change fixes the first issue by clearing the relevant bits from
the MFC_CNTL value in the CSA before or-ing in the updated status.
Also, we add the Q bit to the updated status.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-05-05 13:33:42 +10:00
Jeremy Kerr
1ca4264ee1 [POWERPC] spufs: fix save of mfc_cntl register
Currently, we can introduce invalid entries into the MFC queues:

1) context starts a DMA

2) context gets scheduled out during a DMA
  - kernel saves MFC queue to CSA
  - kernel saves 0x0 in csa->mfc_control_RW

3) context gets scheduled in
  - csa->mfc_control[Q] ('queues empty') isn't set, so DMA queues are
    restored from the CSA

4) context's DMA is completed

5) context gets scheduled out again, no DMA occuring this time
  - kernel sees that MFC_CNTL[Q] ('queues empty') is set, so doesn't
    touch saved queue data in CSA
  - kernel saves 0x0 in csa->mfc_control_RW

6) context gets scheduled in
  - csa->mfc_control[Q] ('queues empty') isn't set (we saved is as 0!),
    so DMA queues are restored from the CSA

In this last restore, we've restored the queue status from step 2,
which are now invalid.

This change makes save_mfc_cntl() closer to the save/restore sequence,
as specified in the CBE handbook.

With changes from Luke Browning.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-05-05 13:33:42 +10:00
Jeremy Kerr
943906ba4b [POWERPC] spufs: don't touch suspend bits when purging DMA queue
When we issue a MFC purge request, we may inadvertantly clear the
suspended status.

This change adds the MFC_CNTL_SUSPEND_MASK when we issue a purge
request, so that the suspend bit is masked out.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-05-05 13:33:42 +10:00
Jeremy Kerr
5711fe900d [POWERPC] cell: Fix lost interrupts due to fasteoi handler
We may currently lose interrupts during SPE context switch, as we alter
the INT_Route register. Because the IIC uses a per-thread priority
status, changing the interrupt routing to a different thread means that
the IRQ is no longer masked by the priority status, so we end up with
two fasteoi IRQ handlers executing for the one irq_desc. The fasteoi
handler doesn't handle multiple IRQs, so drops the second one.

Fix this by using our own flow handler. This is based on
handle_edge_irq, but issues an eoi after IRQs are handled, and doesn't
do any mask/unmasking.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-05-05 13:33:42 +10:00
Linus Torvalds
45ea2103d8 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86-fixes
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86-fixes:
  x86: fix setup printk format warning
  x86: olpc build fix
  x86: video/fbdev.c: add MODULE_LICENSE
  x86: fix up bootparam.h for userspace inclusion
  x86: relocs ELF handling - use SELFMAG instead of numeric constant
  x86: vdso ELF handling - use SELFMAG instead of numeric constant
  x86: remove dell reboot dmi quirk board name match
  x86: es7000 build fix
  x86: make additional_cpus static
  x86: make start_secondary() static
  kbuild, suspend, x86: fix rebuild of wakeup.bin
  uml: fix gcc problem
  x86: undo visws/numaq build changes
2008-05-04 17:11:43 -07:00
Randy Dunlap
62179849b4 x86: fix setup printk format warning
Fix x86 setup printk format warming:

next-20080430/arch/x86/kernel/setup.c:172: warning: format '%lu' expects type 'long unsigned int', but argument 2 has type 'ssize_t'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: mingo@elte.hu
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-04 20:04:46 +02:00
Thomas Gleixner
e26a28d190 x86: olpc build fix
CONFIG_OLPC needs to depend on MGEODE_LX

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-04 20:04:46 +02:00
Adrian Bunk
7b04fa014c x86: video/fbdev.c: add MODULE_LICENSE
Add the missing MODULE_LICENSE("GPL").

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-04 20:04:46 +02:00
Cyrill Gorcunov
8bd1796ded x86: relocs ELF handling - use SELFMAG instead of numeric constant
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: akpm@linux-foundation.org
Cc: hpa@zytor.com
Cc: mingo@elte.hu
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-04 20:04:45 +02:00
Cyrill Gorcunov
ecb783eae1 x86: vdso ELF handling - use SELFMAG instead of numeric constant
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: akpm@linux-foundation.org
Cc: hpa@zytor.com
Cc: mingo@elte.hu
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-04 20:04:45 +02:00
Ben
163ea310b6 x86: remove dell reboot dmi quirk board name match
http://bugzilla.kernel.org/show_bug.cgi?id=10547

Newer Dell OptiPlex 745s hang before rebooting after 'sudo reboot'.

A patch for some versions of the OptiPlex was proposed here --
http://lkml.org/lkml/2007/6/5/59 -- and is included in 2.6.23 and
later kernels, according to
http://lxr.linux.no/linux+v2.6.23/arch/i386/kernel/reboot.c . However,
the DMI_BOARD_NAME ("0WF810") is too restrictive. Newer OptiPlex
machines have a DMI_BOARD_NAME of "0RF703".  I therefore suggest
adding another clause to reboot.c, similar to the one in the original
patch, but matching a DMI_BOARD_NAME of "0RF703".

On further inspection, it seems that there are other DMI_BOARD_NAMEs
for this same machine. They seem to change from time to time, which
means that the current code is fragile. Moreover, using bios reboot
should not break non-SFF OptiPlex 745s, and so a reasonable fix is to
simply drop the match on DMI_BOARD_NAME.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-04 20:04:45 +02:00
Ingo Molnar
e37ee42caa x86: es7000 build fix
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-04 20:04:45 +02:00
Adrian Bunk
c5562faeaa x86: make additional_cpus static
This patch makes the needlessly global additional_cpus static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-04 20:04:45 +02:00
Adrian Bunk
dbe55f4797 x86: make start_secondary() static
start_secondary() needlessly became global.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-04 20:04:45 +02:00
Sam Ravnborg
4c6214c75a kbuild, suspend, x86: fix rebuild of wakeup.bin
In kernel/acpi/realmode/Makefile use the 'always'
variable to say that wakeup.bin should always
be made.

In acpi/Makefile we then do not need to specify the
requested target and we avoid the message from make:

   `arch/x86/kernel/acpi/realmode/wakeup.bin' is up to date.

Add wakeup.lds to list af targets to avoid rebuilding
wakeup.bin - from Roland McGrath.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Pavel Machek <pavel@suse.cz>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-04 20:04:45 +02:00
Ingo Molnar
22eecde2f9 uml: fix gcc problem
this is what caused gcc 4.3 to throw an internal error when
OPTIMIZE_INLINING was enabled ...

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-04 20:04:45 +02:00
Thomas Gleixner
48b83d2425 x86: undo visws/numaq build changes
arch/x86/pci/Makefile_32 has a nasty detail. VISWS and NUMAQ build
override the generic pci-y rules. This needs a proper cleanup, but
that needs more thoughts. Undo

commit 895d30935e
    x86: numaq fix
    do not override the existing pci-y rule when adding visws or
    numaq rules.

There is also a stupid init function ordering problem vs. acpi.o

Add comments to the Makefile to avoid tripping over this again.

Remove the srat stub code in discontig_32.c to allow a proper NUMAQ
build.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-04 20:04:45 +02:00
Glauber Costa
b8ba5f10c5 x86: KVM geust: make setup_secondary_clock definition dependent on local apic
Since the pv_apic_ops are only present if CONFIG_X86_LOCAL_APIC is compiled
in, kvmclock failed to build without this option.  This patch fixes this.

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-05-04 14:45:12 +03:00
Avi Kivity
93df766322 KVM: MMU: Allow more than PAGES_PER_HPAGE write protections per large page
nonpae guests can call rmap_write_protect twice per page (for page tables)
or four times per page (for page directories), triggering a bogus warning.

Remove the warning.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-05-04 14:44:49 +03:00
Andrea Arcangeli
bc1a34f1bf KVM: avoid fx_init() schedule in atomic
This make sure not to schedule in atomic during fx_init. I also
changed the name of fpu_init to fx_finit to avoid duplicating the name
with fpu_init that is already used in the kernel, this makes grep
simpler if nothing else.

Signed-off-by: Andrea Arcangeli <andrea@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-05-04 14:44:48 +03:00
Jan Kiszka
b4f14abd95 KVM: Avoid spurious execeptions after setting registers
Clear pending exceptions when setting new register values. This avoids
spurious exceptions after restoring a vcpu state or after
reset-on-triple-fault.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-05-04 14:44:47 +03:00
Marcelo Tosatti
ece15babfa KVM: PIT: support mode 4
The in-kernel PIT emulation ignores pending timers if operating under
mode 4, which for example DragonFlyBSD uses (and Plan9 too, apparently).

Mode 4 seems to be similar to one-shot mode, other than the fact that it
starts counting after the next CLK pulse once programmed, while mode 1
starts counting immediately, so add a FIXME to enhance precision.

Fixes sourceforge bug 1952988.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Acked-by: Sheng Yang <sheng.yang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-05-04 14:44:46 +03:00
Avi Kivity
dc7457ea52 KVM: x86 emulator: disable writeback on lmsw
The recent changes allowing memory operands with lmsw and smsw left
lmsw with writeback enabled.  Since lmsw has no oridinary destination
operand, the dst pointer was not initialized, resulting in an oops.

Close the hole by disabling writeback for lmsw.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-05-04 14:44:45 +03:00
Christian Ehrhardt
de368dceb3 KVM: ppc: deliver INTERRUPT_FP_UNAVAIL to the guest
This patch adds the delivery of INTERRUPT_FP_UNAVAIL exceptions to the guest.
It's needed if a guest uses ppc binaries using the Floating point instructions.

Signed-off-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Acked-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-05-04 14:44:45 +03:00
Hollis Blanchard
45c5eb67da KVM: ppc: Handle guest idle by emulating MSR[WE] writes
This reduces host CPU usage when the guest is idle. However, the guest must
set MSR[WE] in its idle loop, which Linux did not do until 2.6.26.

Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Jerone Young <jyoung5@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-05-04 14:44:44 +03:00
Izik Eidus
3fe913e7c5 KVM: x86: task switch: fix wrong bit setting for the busy flag
The busy bit is bit 1 of the type field, not bit 8.

Signed-off-by: Izik Eidus <izike@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-05-04 14:44:43 +03:00
Sheng Yang
1439442c7b KVM: VMX: Enable EPT feature for KVM
Signed-off-by: Sheng Yang <sheng.yang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-05-04 14:44:42 +03:00
Sheng Yang
b7ebfb0509 KVM: VMX: Prepare an identity page table for EPT in real mode
[aliguory: plug leak]

Signed-off-by: Sheng Yang <sheng.yang@intel.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-05-04 14:44:41 +03:00
Sheng Yang
1ac593c97e KVM: MMU: Remove #ifdef CONFIG_X86_64 to support 4 level EPT
Currently EPT level is 4 for both pae and x86_64. The patch remove the #ifdef
for alloc root_hpa and free root_hpa to support EPT.

Signed-off-by: Sheng Yang <sheng.yang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-05-04 14:44:39 +03:00
Sheng Yang
7b52345e2c KVM: MMU: Add EPT support
Enable kvm_set_spte() to generate EPT entries.

Signed-off-by: Sheng Yang <sheng.yang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-05-04 14:44:38 +03:00
Sheng Yang
67253af52e KVM: Add kvm_x86_ops get_tdp_level()
The function get_tdp_level() provided the number of tdp level for EPT and
NPT rather than the NPT specific macro.

Signed-off-by: Sheng Yang <sheng.yang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-05-04 14:44:34 +03:00
Robert Jarzmik
649de51b88 [ARM] 5027/1: Fixed random memory corruption on pxa suspend cycle.
Each time a pxa type cpu went in suspend, a portion of
kmalloc memory was corrupted.
The issue was an incorrect length allocation introduced by
the commit 711be5ccfe for
the save registers array (=> overflow).

Signed-off-by: Robert Jarzmik <rjarzmik@free.fr>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-05-04 11:06:05 +01:00
Ryan Mallon
f8b6389bd5 [ARM] 5023/1: Fix broken gpio interrupts on ep93xx
Change gpio_direction_output to gpio_direction_input in
ep93xx_gpio_irq_type. Fixes broken gpio interrupts.

Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-05-04 11:06:05 +01:00
Sheng Yang
8c6d6adc6b KVM: MMU: Move some definitions to a header file
Move some definitions to mmu.h in order to allow building common table
entries between EPT and non-EPT.

Signed-off-by: Sheng Yang <sheng.yang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-05-04 12:26:38 +03:00
Sheng Yang
d56f546db9 KVM: VMX: EPT Feature Detection
Signed-off-by: Sheng Yang <sheng.yang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-05-04 12:26:38 +03:00
David S. Miller
81d6ec6b36 Revert "[SPARC64]: Wrap SMP IPIs with irq_enter()/irq_exit()."
This reverts commit 2664ef44cf.

Ingo moved around where the softlockup dependency sits
so this change is no longer necessary.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-03 21:00:55 -07:00
Ulrich Drepper
d35c7b0e54 unified (weak) sys_pipe implementation
This replaces the duplicated arch-specific versions of "sys_pipe()" with
one unified implementation.  This removes almost 250 lines of duplicated
code.

It's marked __weak, so that *if* an architecture wants to override the
default implementation it can do so by simply having its own replacement
version, since many architectures use alternate calling conventions for
the 'pipe()' system call for legacy reasons (ie traditional UNIX
implementations often return the two file descriptors in registers)

I still haven't changed the cris version even though Linus says the BKL
isn't needed.  The arch maintainer can easily do it if there are really
no obstacles.

Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-03 13:50:33 -07:00
Linus Torvalds
bf640be423 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc32: Delete prom_stdin and prom_stdout.
  sparc32: More memory probing consolidation.
  sparc32: Kill totally unused memory information tables.
  sparc64: Fix syscall restart, for real...
  serial: Fix sparc driver name strings.
  sparc64: Stop creating dummy root PCI host controller devices.
2008-05-03 10:05:11 -07:00
Linus Torvalds
c36c804559 Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] Bolt in SLB entry for kernel stack on secondary cpus
  [POWERPC] PS3: Update ps3_defconfig
  [POWERPC] PS3: Remove unsupported wakeup sources
  [POWERPC] PS3: Make ps3_virq_setup and ps3_virq_destroy static
  [POWERPC] PS3: Add time include to lpm
  [POWERPC] Fix slb.c compile warnings
  [POWERPC] Xilinx: Fix compile warnings
  [POWERPC] Squash build warning for print of resource_size_t in fsl_soc.c
  [RAPIDIO] fix current kernel-doc notation
  [POWERPC] 86xx: mpc8610_hpcd: add support for PCI Express x8 slot
  Fix a potential issue in mpc52xx uart driver
  [POWERPC] mpc5200: Allow for fixed speed MII configurations
  [POWERPC] 86xx: Fix the wrong serial1 interrupt for 8610 board
2008-05-03 10:01:33 -07:00
Linus Torvalds
b66e1f11eb Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  [PATCH] fix sysctl_nr_open bugs
  [PATCH] sanitize anon_inode_getfd()
  [PATCH] split linux/file.h
  [PATCH] make osf_select() use core_sys_select()
  [PATCH] remove horrors with irix tty ioctls handling
  [PATCH] fix file and descriptor handling in perfmon
2008-05-02 11:23:14 -07:00
Linus Torvalds
59d42c0eb1 Merge branch 'for-linus' of git://www.linux-m32r.org/git/takata/linux-2.6_dev
* 'for-linus' of git://www.linux-m32r.org/git/takata/linux-2.6_dev:
  m32r: cleanup: drop .data.idt section in vmlinux.lds script
  m32r: use KBUILD_DEFCONFIG
2008-05-02 08:20:43 -07:00
Linus Torvalds
8bec4a5d93 Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] fix file and descriptor handling in perfmon
  [IA64] TS_RESTORE_SIGMASK
  [IA64] smp.c coding style fix
  [IA64] fix section mismatch in arch/ia64/kernel/topology.c
  [IA64] fix section mismatch in arch/ia64/kernel/palinfo.c
  [IA64] fix section mismatch in arch/ia64/kernel/irq.c
  [IA64] fix section mismatch in arch/ia64/kernel/acpi.c
2008-05-02 08:17:58 -07:00
David S. Miller
4a1236ac6e sparc32: Delete prom_stdin and prom_stdout.
They are written, but never used.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-02 05:22:54 -07:00
David S. Miller
9f2b2a5f68 sparc32: More memory probing consolidation.
The PROM library function prom_meminit() builds a table,
prom_phys_avail[], just so that probe_memory() in
arch/sparc/mm/fault.c can copy it into sp_banks[].

Just have prom_meminit() fill in the sp_banks[] array directly, and
remove duplicated sort() function.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-02 05:22:53 -07:00
David S. Miller
ccc34028d4 sparc32: Kill totally unused memory information tables.
The code in arch/sparc/prom/memory.c computes three tables, the list
of total memory, the list of available memory (total minus what
firmware is using), and the list of firmware taken memory.

Only the available memory list is even used.

Therefore, kill those unused tables and make prom_meminfo() return
just the available memory list.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-02 05:22:53 -07:00
David S. Miller
2678fefedb sparc64: Fix syscall restart, for real...
The change I put into copy_thread() just papered over the real
problem.

When we are looking to see if we should do a syscall restart, when
deliverying a signal, we should only interpret the syscall return
value as an error if the carry condition code(s) are set.

Otherwise it's a success return.

Also, sigreturn paths should do a pt_regs_clear_trap_type().

It turns out that doing a syscall restart when returning from a fork()
does and should happen, from time to time.  Even if copy_thread()
returns success, copy_process() can still unwind and signal
-ERESTARTNOINTR in the parent.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-02 05:22:52 -07:00
David S. Miller
c26d3c0138 sparc64: Stop creating dummy root PCI host controller devices.
It just creates confusion, errors, and bugs.

For one thing, this can cause dup sysfs or procfs nodes to get
created:

[    1.198015] proc_dir_entry '00.0' already registered
[    1.198036] Call Trace:
[    1.198052]  [00000000004f2534] create_proc_entry+0x7c/0x98
[    1.198092]  [00000000005719e4] pci_proc_attach_device+0xa4/0xd4
[    1.198126]  [00000000007d991c] pci_proc_init+0x64/0x88
[    1.198158]  [00000000007c62a4] kernel_init+0x190/0x330
[    1.198183]  [0000000000426cf8] kernel_thread+0x38/0x48
[    1.198210]  [00000000006a0d90] rest_init+0x18/0x5c

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-02 05:22:50 -07:00
Paul Mackerras
3b5750644b [POWERPC] Bolt in SLB entry for kernel stack on secondary cpus
This fixes a regression reported by Kamalesh Bulabel where a POWER4
machine would crash because of an SLB miss at a point where the SLB
miss exception was unrecoverable.  This regression is tracked at:

http://bugzilla.kernel.org/show_bug.cgi?id=10082

SLB misses at such points shouldn't happen because the kernel stack is
the only memory accessed other than things in the first segment of the
linear mapping (which is mapped at all times by entry 0 of the SLB).
The context switch code ensures that SLB entry 2 covers the kernel
stack, if it is not already covered by entry 0.  None of entries 0
to 2 are ever replaced by the SLB miss handler.

Where this went wrong is that the context switch code assumes it
doesn't have to write to SLB entry 2 if the new kernel stack is in the
same segment as the old kernel stack, since entry 2 should already be
correct.  However, when we start up a secondary cpu, it calls
slb_initialize, which doesn't set up entry 2.  This is correct for
the boot cpu, where we will be using a stack in the kernel BSS at this
point (i.e. init_thread_union), but not necessarily for secondary
cpus, whose initial stack can be allocated anywhere.  This doesn't
cause any immediate problem since the SLB miss handler will just
create an SLB entry somewhere else to cover the initial stack.

In fact it's possible for the cpu to go quite a long time without SLB
entry 2 being valid.  Eventually, though, the entry created by the SLB
miss handler will get overwritten by some other entry, and if the next
access to the stack is at an unrecoverable point, we get the crash.

This fixes the problem by making slb_initialize create a suitable
entry for the kernel stack, if we are on a secondary cpu and the stack
isn't covered by SLB entry 0.  This requires initializing the
get_paca()->kstack field earlier, so I do that in smp_create_idle
where the current field is initialized.  This also abstracts a bit of
the computation that mk_esid_data in slb.c does so that it can be used
in slb_initialize.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-02 15:00:45 +10:00
Geoff Levand
d9f2f3f537 [POWERPC] PS3: Update ps3_defconfig
Update ps3_defconfig.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-02 15:00:45 +10:00
Geert Uytterhoeven
fdedb4caea [POWERPC] PS3: Make ps3_virq_setup and ps3_virq_destroy static
The routines ps3_virq_setup() and ps3_virq_destroy() are used
in only one file, so make them static.

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-02 15:00:44 +10:00
Geoff Levand
bbea346062 [POWERPC] Fix slb.c compile warnings
Arrange for a syntax check to always be done on the powerpc/mm/slb.c
DBG() macro by defining it to pr_debug() for non-debug builds.

Also, fix these related compile warnings:

  slb.c:273: warning: format '%04x' expects type 'unsigned int', but argument 2 has type 'long unsigned int
  slb.c:274: warning: format '%04x' expects type 'unsigned int', but argument 2 has type 'long unsigned int'

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-02 15:00:44 +10:00