Commit Graph

26 Commits

Author SHA1 Message Date
Ben Hutchings
4f16c07391 sfc: Replace PHY MDIO test with an 'alive' test
SFC9000-family boards do not all use MDIO PHYs, so we need a different
test for PHY aliveness.

Introduce a PHY operation test_alive().  For PHYs attached to Falcon,
use a common implementation based on the existing PHY MDIO test.
For PHYs managed through MCDI, use the appropriate MCDI request.

Change test name in ethtool from 'core mdio' to 'phy alive'.

Rename test_results::mdio to phy_alive and test_results::phy to phy_ext.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-03 19:12:44 -08:00
Ben Hutchings
906bb26c06 sfc: Update version, copyright dates, authors
This driver has been mostly rewritten since Michael Brown's initial
work, so swap the order of the authors.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-29 17:23:58 -08:00
Ben Hutchings
744093c983 sfc: Rename falcon.h to nic.h
nic.h is no longer specific to Falcon.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-29 17:23:55 -08:00
Ben Hutchings
c1c4f453b6 sfc: Remove static PHY data and enumerations
New NICs have firmware managing the PHY, and we will discover the PHY
capabilities at run-time.  Replace the static data with probe() and
test_name() operations.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-29 17:23:53 -08:00
Ben Hutchings
e58f69f408 sfc: Extend loopback mode enumeration
New NICs and PHYs support a wider variety of loopback modes.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-29 17:23:53 -08:00
Ben Hutchings
d3245b28ef sfc: Refactor link configuration
Refactor PHY, MAC and NIC configuration operations so that the
existing link configuration can be re-pushed with:

	efx->phy_op->reconfigure(efx);
	efx->mac_op->reconfigure(efx);

and a new configuration with:

	efx->nic_op->reconfigure_port(efx);

(plus locking and error-checking).

We have not held the link settings in software (aside from flow
control), and have relied on asking the hardware what they are.  This
is a problem because in some cases the hardware may no longer be in a
state to tell us.  In particular, if an entire multi-port board is
reset through one port, the driver bindings to other ports have no
chance to save settings before recovering.

We only actually need to keep track of the autonegotiation settings,
so add an ethtool advertising mask to struct efx_nic, initialise it
in PHY init and update it as necessary.

Remove now-unneeded uses of efx_phy_op::{get,set}_settings() and
struct ethtool_cmd.

Much of this was done by Steve Hodgson <shodgson@solarflare.com>.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-29 16:46:28 -08:00
Ben Hutchings
fc2b5e673f sfc: Remove unused code for non-autoneg speed/duplex switching
The only multi-speed PHY driver using this is 10Xpress, and it does
not support non-autoneg operation.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-24 04:27:26 -07:00
Ben Hutchings
18ea024fd6 sfc: Merge efx_fc_resolve() into efx_mdio_get_pause()
efx_fc_resolve() is specific to MDIO and is not used by any other
function.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-24 04:27:25 -07:00
Ben Hutchings
5087b54ddc sfc: Remove boards.h, moving last remaining declaration to falcon.h
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-24 04:26:56 -07:00
Ben Hutchings
3f926da82f sfc: Use generic MDIO flow control auto-negotiation functions
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-29 17:32:37 -07:00
Ben Hutchings
68e7f45e11 sfc: Use generic MDIO functions and definitions
Make use of the newly-added generic MDIO clause 45 support and remove
redundant definitions.

Add an 'efx_' prefix to the remaining driver-specific MDIO functions
and remove arguments which are redundant with efx->mdio.prtad.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-29 17:32:30 -07:00
Ben Hutchings
3f39a5e9bf sfc: Fix reporting of PHY id
Shuffle bits of the OUI into the conventional written order.

Replace PHY id component macros with functions.

Zero-pad PHY id components in log messages.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-02 03:15:04 -08:00
Ben Hutchings
7b065f91fa sfc: Fix test for MDIO read failure
Commit 27dd2caca4 changed
mdio_clause45_check_mmds() to read both DEVS0 and DEVS1 registers and
to combine their values into an unsigned 32-bit mask.  This made the
following test for a negative (failure) value useless.  Fix it to
check whether either read failed.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-02 03:15:02 -08:00
Ben Hutchings
af4ad9bca0 sfc: SFX7101/SFT9001: Fix AN advertisements
All 10Xpress PHYs require autonegotiation all the time; enforce this
in the set_settings() method and do not treat it as a workaround.

Remove claimed support for 100M HD mode since it is not supported by
current firmware.

Do not set speed override bits when AN is enabled, and do not use
register 1.49192 for AN configuration as it can override what we set
elsewhere.

Always set the AN selector bits to 1 (802.3).

Fix confusion between Next Page and Extended Next Page.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-30 14:06:32 -08:00
Steve Hodgson
67797763c6 sfc: Test for PHYXS faults whenever we cannot test link state bits
Depending on the loopback mode, there may be no pertinent link state
bits.  In this case we test the PHYXS RX fault bit instead.  Make
sure to do this in all cases where there are no link state bits.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-30 14:06:31 -08:00
Steve Hodgson
8b9dc8dd44 sfc: SFT9001: Fix speed reporting in 1G PHY loopback
Instead of disabling AN in loopback, just prevent restarting AN and
override the speed in sft9001_get_settings().

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-30 14:06:29 -08:00
Ben Hutchings
843813453f sfc: If AN is enabled, always read speed/duplex from the AN advertising bits
When AN is enabled and the link is down the speed/duplex control bits
will not be meaningful.  Use the advertising bits instead, and mask
them with the LPA bits if and only if AN is complete (as before).

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-26 13:49:25 -08:00
Ben Hutchings
caa8d8bbdd sfc: Fix unreliable link detection in some loopback modes
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-26 13:46:12 -08:00
Ben Hutchings
04cc8cacb0 sfc: Implement auto-negotiation
Add infrastructure for auto-negotiation of speed, duplex and flow
control.

When using 10Xpress, auto-negotiate flow control.  While we're
at it, clean up the code to warn when partner is not 10GBASE-T
capable.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-12 21:58:17 -08:00
Ben Hutchings
356eebb2b3 sfc: Clean up MDIO flag setting
We often want to set or clear a flag in an MDIO register, but avoid
writing if no change is required since this can have side-effects.
Encapsulate this in a function, mdio_clause45_set_flag().

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-12 21:58:16 -08:00
Ben Hutchings
27dd2caca4 sfc: Add support for MMDs numbered >15
Combine DEVS0 and DEVS1 registers into a 32-bit mask instead of
reading just DEVS0.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-12 21:57:58 -08:00
Ben Hutchings
3e133c44d2 sfc: Use lm87 and lm90 drivers for board temperature/power monitoring
Add board monitoring to periodic work whenever link is down.
For SFE4001, report when a fault has caused the PHY to turn off.
For SFE4002, switch XFP PHY into low-power state in case of a fault.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-06 00:50:09 -05:00
Ben Hutchings
f8b87c1701 sfc: Make PHY flash mode a device attribute, not a module parameter
This allows updating PHY firmware for one interface without removing
all other interfaces handled by the driver.

Replace tx_disabled flags and 10Xpress status enumeration with flags in
enum efx_phy_mode.

Prevent an interface from being brought up while in PHY flash mode.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03 09:53:47 -04:00
Ben Hutchings
dc8cfa55da sfc: Use explicit bool for boolean variables, parameters and return values
Replace (cond ? 1 : 0) with cond or !!cond as appropriate, and
(cond ? 0 : 1) with !cond.

Remove some redundant boolean temporaries.

Rename one field that looks like a flag but isn't.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03 09:53:45 -04:00
Ben Hutchings
3273c2e8c6 [netdrvr] sfc: sfc: Add self-test support
Add a set of self-tests accessible thorugh ethtool.
Add hardware loopback and TX disable control code to support them.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-13 01:31:44 -04:00
Ben Hutchings
8ceee660aa New driver "sfc" for Solarstorm SFC4000 controller.
The driver supports the 10Xpress PHY and XFP modules on our reference
designs SFE4001 and SFE4002 and the SMC models SMC10GPCIe-XFP and
SMC10GPCIe-10BT.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-29 01:42:43 -04:00