Commit Graph

24 Commits

Author SHA1 Message Date
Russell King
9dfec4fe6d ARM: integrator: switch Integrator platforms to use consolidated CLCD
This switches integrator platforms to use the consolidated CLCD
panel support, including the display capabilities.  These capabilities
prevent the unsupported BGR565 mode being selected, while still
allowing RGB5551, BGR5551 and RGB565 modes.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-19 11:09:18 +00:00
Jean-Christop PLAGNIOL-VILLARD
6d803ba736 ARM: 6483/1: arm & sh: factorised duplicated clkdev.c
factorise some generic infrastructure to assist looking up struct clks
for the ARM & SH architecture.

as the code is identical at 99%

put the arch specific code for allocation as example in asm/clkdev.h

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-26 10:51:04 +00:00
Russell King
ac1d426e82 Merge branch 'devel-stable' into devel
Conflicts:
	arch/arm/Kconfig
	arch/arm/include/asm/system.h
	arch/arm/mm/Kconfig
2010-05-17 17:24:04 +01:00
Russell King
9bf5b2ef67 ARM: Indirect round/set_rate operations through clk structure
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-02 09:35:38 +01:00
Russell King
d1914c7e75 ARM: Make Integrator/Versatile/Reaview VCO code similar
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-02 09:35:37 +01:00
Russell King
c5a0adb510 ARM: ICST: kill duplicate icst code
The only difference between ICST307 and ICST525 are the two arrays
for calculating the S parameter; the code is now identical.  Merge
the two files and kill the duplicated code.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-02 09:35:33 +01:00
Russell King
232eaf7f26 ARM: ICST: indirect s2div and idx2s arrays via icst_params
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-02 09:35:32 +01:00
Russell King
e73a46a3d3 ARM: ICST: move minimum VCO frequency to icst_params
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-02 09:35:31 +01:00
Russell King
64fceb1dcd ARM: ICST: use Hz instead of kHz
This makes the ICST support fit more nicely with the clk API,
eliminating the need to *1000 and /1000 in places.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-02 09:35:31 +01:00
Russell King
4de2edbd15 ARM: ICST: provide definitions for max/min VCO frequencies
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-02 09:35:30 +01:00
Russell King
39c0cb02db ARM: ICST: merge common ICST VCO structures
The structures for the ICST307 and ICST525 VCO devices are
identical, so merge them together.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-02 09:35:29 +01:00
Tejun Heo
5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Russell King
d72fbdf01f [ARM] integrator: convert to clkdev and lookup clocks by device name
People often point to the Integrator/Versatile/Realview
implementations to justify using the consumer name as the sole
selector for clocks.

Eliminate this excuse by changing the Integrator implementation, so
it provides a better example of how it should be done.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-27 12:38:22 +00:00
Russell King
fced80c735 [ARM] Convert asm/io.h to linux/io.h
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-06 12:10:45 +01:00
Russell King
faa64c93ae [ARM] fix impd1.c build warning
CC      arch/arm/mach-integrator/impd1.o
arch/arm/mach-integrator/impd1.c: In function `impd1_probe':
arch/arm/mach-integrator/impd1.c:408: warning: too few arguments for format

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-18 13:52:07 +01:00
Russell King
a09e64fbc0 [ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach
This just leaves include/asm-arm/plat-* to deal with.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07 09:55:48 +01:00
Kay Sievers
3f9787046e arm: bus_id -> dev_name() and dev_set_name() conversions
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 21:55:03 -07:00
Greg Kroah-Hartman
fc3a8828b1 driver core: fix a lot of printk usages of bus_id
We have the dev_printk() variants for this kind of thing, use them
instead of directly trying to access the bus_id field of struct device.

This is done in order to remove bus_id entirely.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 21:54:53 -07:00
Russell King
7c28472a5d [ARM] integrator: fix build warnings and errors
Fix resource_size_t warning in impd1.c, and printascii() build
errors in pci_v3.c

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-05-23 19:35:52 +01:00
Russell King
d2a02b93cf [ARM] Convert kmalloc+memset to kzalloc
Convert all uses of kmalloc followed by memset to use kzalloc instead.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21 22:06:17 +00:00
Russell King
a62c80e559 [ARM] Move AMBA include files to include/linux/amba/
Since the ARM AMBA bus is used on MIPS as well as ARM, we need
to make the bus available for other architectures to use.  Move
the AMBA include files from include/asm-arm/hardware/ to
include/linux/amba/

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-07 13:52:45 +00:00
Jesper Juhl
b2325fe1b7 [PATCH] kfree cleanup: arch
This is the arch/ part of the big kfree cleanup patch.

Remove pointless checks for NULL prior to calling kfree() in arch/.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Acked-by: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:54:06 -08:00
Russell King
d185663760 [ARM] Fix Integrator IM/PD-1 support
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-21 10:17:37 +01:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00