Commit Graph

66 Commits

Author SHA1 Message Date
Ingo Molnar
0936912274 Merge branches 'x86/cleanups', 'x86/mpparse', 'x86/numa' and 'x86/uv' into x86/urgent 2009-01-06 17:39:52 +01:00
Linus Torvalds
7d3b56ba37 Merge branch 'cpus4096-for-linus-3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'cpus4096-for-linus-3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (77 commits)
  x86: setup_per_cpu_areas() cleanup
  cpumask: fix compile error when CONFIG_NR_CPUS is not defined
  cpumask: use alloc_cpumask_var_node where appropriate
  cpumask: convert shared_cpu_map in acpi_processor* structs to cpumask_var_t
  x86: use cpumask_var_t in acpi/boot.c
  x86: cleanup some remaining usages of NR_CPUS where s/b nr_cpu_ids
  sched: put back some stack hog changes that were undone in kernel/sched.c
  x86: enable cpus display of kernel_max and offlined cpus
  ia64: cpumask fix for is_affinity_mask_valid()
  cpumask: convert RCU implementations, fix
  xtensa: define __fls
  mn10300: define __fls
  m32r: define __fls
  h8300: define __fls
  frv: define __fls
  cris: define __fls
  cpumask: CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS
  cpumask: zero extra bits in alloc_cpumask_var_node
  cpumask: replace for_each_cpu_mask_nr with for_each_cpu in kernel/time/
  cpumask: convert mm/
  ...
2009-01-03 12:04:39 -08:00
Mike Travis
80855f7361 cpumask: use alloc_cpumask_var_node where appropriate
Impact: Reduce inter-node memory traffic.

Reduces inter-node memory traffic (offloading the global system bus)
by allocating referenced struct cpumasks on the same node as the
referring struct.

Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-03 19:15:40 +01:00
Mike Travis
7eb1955336 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-cpumask into merge-rr-cpumask
Conflicts:
	arch/x86/kernel/io_apic.c
	kernel/rcuclassic.c
	kernel/sched.c
	kernel/time/tick-sched.c

Signed-off-by: Mike Travis <travis@sgi.com>
[ mingo@elte.hu: backmerged typo fix for io_apic.c ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-03 18:53:31 +01:00
Markus Trippelsdorf
37dd3cb415 x86: remove debug printks (io_apic.c)
Impact: reduce printk noise

The message "alloc irq_2_pin on cpu 0 node 0" is printed way too often.

% dmesg|grep irq_2_pin|wc -l
20

Get rid of the debug printks.

Signed-off-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-02 23:19:36 +01:00
Ingo Molnar
923a789b49 Merge branch 'linus' into x86/cleanups
Conflicts:
	arch/x86/kernel/reboot.c
2009-01-02 22:41:36 +01:00
Linus Torvalds
b840d79631 Merge branch 'cpus4096-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'cpus4096-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (66 commits)
  x86: export vector_used_by_percpu_irq
  x86: use logical apicid in x2apic_cluster's x2apic_cpu_mask_to_apicid_and()
  sched: nominate preferred wakeup cpu, fix
  x86: fix lguest used_vectors breakage, -v2
  x86: fix warning in arch/x86/kernel/io_apic.c
  sched: fix warning in kernel/sched.c
  sched: move test_sd_parent() to an SMP section of sched.h
  sched: add SD_BALANCE_NEWIDLE at MC and CPU level for sched_mc>0
  sched: activate active load balancing in new idle cpus
  sched: bias task wakeups to preferred semi-idle packages
  sched: nominate preferred wakeup cpu
  sched: favour lower logical cpu number for sched_mc balance
  sched: framework for sched_mc/smt_power_savings=N
  sched: convert BALANCE_FOR_xx_POWER to inline functions
  x86: use possible_cpus=NUM to extend the possible cpus allowed
  x86: fix cpu_mask_to_apicid_and to include cpu_online_mask
  x86: update io_apic.c to the new cpumask code
  x86: Introduce topology_core_cpumask()/topology_thread_cpumask()
  x86: xen: use smp_call_function_many()
  x86: use work_on_cpu in x86/kernel/cpu/mcheck/mce_amd_64.c
  ...

Fixed up trivial conflict in kernel/time/tick-sched.c manually
2009-01-02 11:44:09 -08:00
Linus Torvalds
db200df0b3 Merge branch 'irq-fixes-for-linus-4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'irq-fixes-for-linus-4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sparseirq: move __weak symbols into separate compilation unit
  sparseirq: work around __weak alias bug
  sparseirq: fix hang with !SPARSE_IRQ
  sparseirq: set lock_class for legacy irq when sparse_irq is selected
  sparseirq: work around compiler optimizing away __weak functions
  sparseirq: fix desc->lock init
  sparseirq: do not printk when migrating IRQ descriptors
  sparseirq: remove duplicated arch_early_irq_init()
  irq: simplify for_each_irq_desc() usage
  proc: remove ifdef CONFIG_SPARSE_IRQ from stat.c
  irq: for_each_irq_desc() move to irqnr.h
  hrtimer: remove #include <linux/irq.h>
2008-12-31 09:00:59 -08:00
Rusty Russell
2ca1a61583 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:

	arch/x86/kernel/io_apic.c
2008-12-31 23:05:57 +10:30
Linus Torvalds
179475a3b4 Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, sparseirq: clean up Kconfig entry
  x86: turn CONFIG_SPARSE_IRQ off by default
  sparseirq: fix numa_migrate_irq_desc dependency and comments
  sparseirq: add kernel-doc notation for new member in irq_desc, -v2
  locking, irq: enclose irq_desc_lock_class in CONFIG_LOCKDEP
  sparseirq, xen: make sure irq_desc is allocated for interrupts
  sparseirq: fix !SMP building, #2
  x86, sparseirq: move irq_desc according to smp_affinity, v7
  proc: enclose desc variable of show_stat() in CONFIG_SPARSE_IRQ
  sparse irqs: add irqnr.h to the user headers list
  sparse irqs: handle !GENIRQ platforms
  sparseirq: fix !SMP && !PCI_MSI && !HT_IRQ build
  sparseirq: fix Alpha build failure
  sparseirq: fix typo in !CONFIG_IO_APIC case
  x86, MSI: pass irq_cfg and irq_desc
  x86: MSI start irq numbering from nr_irqs_gsi
  x86: use NR_IRQS_LEGACY
  sparse irq_desc[] array: core kernel and x86 changes
  genirq: record IRQ_LEVEL in irq_desc[]
  irq.h: remove padding from irq_desc on 64bits
2008-12-30 16:20:19 -08:00
Rusty Russell
33edcf133b Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 2008-12-30 08:02:35 +10:30
Jaswinder Singh Rajput
7f3e632f9d x86: io_apic.c io_apic_sync should be static
Impact: cleanup, reduce kernel size a bit, avoid sparse warning

Fixes sparse warning:

  arch/x86/kernel/io_apic.c:709:6: warning: symbol 'io_apic_sync' was not declared. Should it be static?

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-29 18:17:31 +01:00
Yinghai Lu
13a0c3c269 sparseirq: work around compiler optimizing away __weak functions
Impact: fix panic on null pointer with sparseirq

Some GCC versions seem to inline the weak global function,
when that function is empty.

Work it around, by making the functions return a (dummy) integer.

Signed-off-by: Yinghai <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-27 13:24:00 +01:00
KOSAKI Motohiro
18eefedfe8 irq: simplify for_each_irq_desc() usage
Impact: cleanup

all for_each_irq_desc() usage point have !desc check.
then its check can move into for_each_irq_desc() macro.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-26 09:48:18 +01:00
Yinghai Lu
b77b881f21 x86: fix lguest used_vectors breakage, -v2
Impact: fix lguest, clean up

32-bit lguest used used_vectors to record vectors, but that model of
allocating vectors changed and got broken, after we changed vector
allocation to a per_cpu array.

Try enable that for 64bit, and the array is used for all vectors that
are not managed by vector_irq per_cpu array.

Also kill system_vectors[], that is now a duplication of the
used_vectors bitmap.

[ merged in cpus4096 due to io_apic.c cpumask changes. ]
[ -v2, fix build failure ]

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-23 22:37:28 +01:00
Yinghai Lu
b909895739 sparseirq: fix numa_migrate_irq_desc dependency and comments
Impact: reduce kconfig variable scope and clean up

Bartlomiej pointed out that the config dependencies and comments are not right.

update it depend to NUMA, and fix some comments

Reported-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-19 22:56:02 +01:00
Ingo Molnar
a7883dece6 x86: fix warning in arch/x86/kernel/io_apic.c
this warning:

  arch/x86/kernel/io_apic.c: In function ‘ir_set_msi_irq_affinity’:
  arch/x86/kernel/io_apic.c:3373: warning: ‘cfg’ may be used uninitialized in this function

triggers because the variable was truly uninitialized. We'd crash on
entering this code.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-19 09:21:59 +01:00
Ingo Molnar
d733e00d7c x86: update io_apic.c to the new cpumask code
Impact: build fix

The sparseirq tree crossed with the cpumask changes, fix the fallout.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-17 13:35:51 +01:00
Ingo Molnar
948a7b2b5e Merge branch 'irq/sparseirq' into cpus4096
Conflicts:
	arch/x86/kernel/io_apic.c

Merge irq/sparseirq here, to resolve conflicts.
2008-12-17 13:16:08 +01:00
Mike Travis
22f65d31b2 x86: Update io_apic.c to use new cpumask API
Impact: cleanup, consolidate patches, use new API

Consolidate the following into a single patch to adapt to new
sparseirq code in arch/x86/kernel/io_apic.c, add allocation of
cpumask_var_t's in domain and old_domain, and reduce further
merge conflicts.  Only one file (arch/x86/kernel/io_apic.c) is
changed in all of these patches.

	0006-x86-io_apic-change-irq_cfg-domain-old_domain-to.patch
	0007-x86-io_apic-set_desc_affinity.patch
	0008-x86-io_apic-send_cleanup_vector.patch
	0009-x86-io_apic-eliminate-remaining-cpumask_ts-from-st.patch
	0021-x86-final-cleanups-in-io_apic-to-use-new-cpumask-AP.patch

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
2008-12-16 17:40:57 -08:00
Mike Travis
e7986739a7 x86 smp: modify send_IPI_mask interface to accept cpumask_t pointers
Impact: cleanup, change parameter passing

  * Change genapic interfaces to accept cpumask_t pointers where possible.

  * Modify external callers to use cpumask_t pointers in function calls.

  * Create new send_IPI_mask_allbutself which is the same as the
    send_IPI_mask functions but removes smp_processor_id() from list.
    This removes another common need for a temporary cpumask_t variable.

  * Functions that used a temp cpumask_t variable for:

	cpumask_t allbutme = cpu_online_map;

	cpu_clear(smp_processor_id(), allbutme);
	if (!cpus_empty(allbutme))
		...

    become:

	if (!cpus_equal(cpu_online_map, cpumask_of_cpu(cpu)))
		...

  * Other minor code optimizations (like using cpus_clear instead of
    CPU_MASK_NONE, etc.)

Applies to linux-2.6.tip/master.

Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Ingo Molnar <mingo@elte.hu>
2008-12-16 17:40:56 -08:00
Yinghai Lu
48a1b10aff x86, sparseirq: move irq_desc according to smp_affinity, v7
Impact: improve NUMA handling by migrating irq_desc on smp_affinity changes

if CONFIG_NUMA_MIGRATE_IRQ_DESC is set:

-  make irq_desc to go with affinity aka irq_desc moving etc
-  call move_irq_desc in irq_complete_move()
-  legacy irq_desc is not moved, because they are allocated via static array

for logical apic mode, need to add move_desc_in_progress_in_same_domain,
otherwise it will not be moved ==> also could need two phases to get
irq_desc moved.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-17 00:14:01 +01:00
Mike Travis
c8cae544bb x86: fix build error with post-merge of tip/cpus4096 and rr-for-ingo/master.
Ingo Molnar wrote:

> allyes64 build failure:
>
> arch/x86/kernel/io_apic.c: In function ‘set_ir_ioapic_affinity_irq_desc’:
> arch/x86/kernel/io_apic.c:2295: error: incompatible type for argument 2 of
> ‘migrate_ioapic_irq_desc’
> arch/x86/kernel/io_apic.c: In function ‘ir_set_msi_irq_affinity’:
> arch/x86/kernel/io_apic.c:3205: error: incompatible type for argument 2 of
> ‘set_extra_move_desc’
> make[1]: *** wait: No child processes.  Stop.

Here's a small patch to correct the build error with the post-merge tree.
Built and boot-tested.  I'll will reset the follow on patches in my brand
new git tree to accommodate this change.

Fix two references in io_apic.c that were incorrect.

Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-16 23:12:18 +01:00
Rusty Russell
968ea6d80e Merge ../linux-2.6-x86
Conflicts:

	arch/x86/kernel/io_apic.c
	kernel/sched.c
	kernel/sched_stats.h
2008-12-13 21:55:51 +10:30
Rusty Russell
0de26520c7 cpumask: make irq_set_affinity() take a const struct cpumask
Impact: change existing irq_chip API

Not much point with gentle transition here: the struct irq_chip's
setaffinity method signature needs to change.

Fortunately, not widely used code, but hits a few architectures.

Note: In irq_select_affinity() I save a temporary in by mangling
irq_desc[irq].affinity directly.  Ingo, does this break anything?

(Folded in fix from KOSAKI Motohiro)

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Grant Grundler <grundler@parisc-linux.org>
Acked-by: Ingo Molnar <mingo@redhat.com>
Cc: ralf@linux-mips.org
Cc: grundler@parisc-linux.org
Cc: jeremy@xensource.com
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
2008-12-13 21:20:26 +10:30
Hiroshi Shimamoto
8f2466f45f x86: kill #ifdef for exit_idle()
Impact: cleanup

Introduce helper inline function in arch/x86/include/asm/idle.h
to remove #ifdefs around exit_idle().

Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-12 11:58:36 +01:00
Yinghai Lu
3145e941fc x86, MSI: pass irq_cfg and irq_desc
Impact: simplify code

Pass irq_desc and cfg around, instead of raw IRQ numbers - this way
we dont have to look it up again and again.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-08 14:31:59 +01:00
Yinghai Lu
be5d5350a9 x86: MSI start irq numbering from nr_irqs_gsi
Impact: sanitize MSI irq number ordering from top-down to bottom-up

Increase new MSI IRQs starting from nr_irqs_gsi (which is somewhere below
256), instead of decreasing from NR_IRQS. (The latter method can result
in confusingly high IRQ numbers - if NR_CPUS is set to a high value and
NR_IRQS scales up to a high value.)

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-08 14:31:54 +01:00
Yinghai Lu
99d093d128 x86: use NR_IRQS_LEGACY
Impact: cleanup

Introduce NR_IRQS_LEGACY instead of hard coded number.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-08 14:31:52 +01:00
Yinghai Lu
0b8f1efad3 sparse irq_desc[] array: core kernel and x86 changes
Impact: new feature

Problem on distro kernels: irq_desc[NR_IRQS] takes megabytes of RAM with
NR_CPUS set to large values. The goal is to be able to scale up to much
larger NR_IRQS value without impacting the (important) common case.

To solve this, we generalize irq_desc[NR_IRQS] to an (optional) array of
irq_desc pointers.

When CONFIG_SPARSE_IRQ=y is used, we use kzalloc_node to get irq_desc,
this also makes the IRQ descriptors NUMA-local (to the site that calls
request_irq()).

This gets rid of the irq_cfg[] static array on x86 as well: irq_cfg now
uses desc->chip_data for x86 to store irq_cfg.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-08 14:31:51 +01:00
Linus Torvalds
72244c0e68 Merge branch 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  irq.h: fix missing/extra kernel-doc
  genirq: __irq_set_trigger: change pr_warning to pr_debug
  irq: fix typo
  x86: apic honour irq affinity which was set in early boot
  genirq: fix the affinity setting in setup_irq
  genirq: keep affinities set from userspace across free/request_irq()
2008-11-30 13:06:20 -08:00
Thomas Gleixner
a1967d6441 x86: revert irq number limitation
Impact: fix MSIx not enough irq numbers available regression

The manual revert of the sparse_irq patches missed to bring the number
of possible irqs back to the .27 status. This resulted in a regression
when two multichannel network cards were placed in a system with only
one IO_APIC - causing the networking driver to not have the right
IRQ and the device not coming up.

Remove the dynamic allocation logic leftovers and simply return
NR_IRQS in probe_nr_irqs() for now.

   Fixes: http://lkml.org/lkml/2008/11/19/354

Reported-by: Jesper Dangaard Brouer <hawk@diku.dk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Jesper Dangaard Brouer <hawk@diku.dk>
Acked-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-23 11:59:52 +01:00
Ingo Molnar
9f14416442 Merge commit 'v2.6.28-rc6' into irq/urgent 2008-11-23 10:52:33 +01:00
Matthew Wilcox
0ca4b6b001 x86: Fix interrupt leak due to migration
When we migrate an interrupt from one CPU to another, we set the
move_in_progress flag and clean up the vectors later once they're not
being used.  If you're unlucky and call destroy_irq() before the vectors
become un-used, the move_in_progress flag is never cleared, which causes
the interrupt to become unusable.

This was discovered by Jesse Brandeburg for whom it manifested as an
MSI-X device refusing to use MSI-X mode when the driver was unloaded
and reloaded repeatedly.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-20 13:17:40 -08:00
Thomas Gleixner
6c2e94033d x86: apic honour irq affinity which was set in early boot
setup_ioapic_dest() is called after the non boot cpus have been
brought up. It sets the irq affinity of all already configured
interrupts to all cpus and ignores affinity settings which were
done by the early bootup code.

If the IRQ_NO_BALANCING or IRQ_AFFINITY_SET flags are set then use the
affinity mask from the irq descriptor and not TARGET_CPUS.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-09 22:25:08 +01:00
Ben Hutchings
c78d0cf292 x86: don't allow nr_irqs > NR_IRQS
Impact: fix boot hang on 32-bit systems with more than 224 IO-APIC pins

On some 32-bit systems with a lot of IO-APICs probe_nr_irqs() can
return a value larger than NR_IRQS. This will lead to probe_irq_on()
overrunning the irq_desc array.

I hit this when running net-next-2.6 (close to 2.6.28-rc3) on a
Supermicro dual Xeon system.  NR_IRQS is 224 but probe_nr_irqs() detects
5 IOAPICs and returns 240.  Here are the log messages:

Tue Nov  4 16:53:47 2008 ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
Tue Nov  4 16:53:47 2008 IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
Tue Nov  4 16:53:47 2008 ACPI: IOAPIC (id[0x02] address[0xfec81000] gsi_base[24])
Tue Nov  4 16:53:47 2008 IOAPIC[1]: apic_id 2, version 32, address 0xfec81000, GSI 24-47
Tue Nov  4 16:53:47 2008 ACPI: IOAPIC (id[0x03] address[0xfec81400] gsi_base[48])
Tue Nov  4 16:53:47 2008 IOAPIC[2]: apic_id 3, version 32, address 0xfec81400, GSI 48-71
Tue Nov  4 16:53:47 2008 ACPI: IOAPIC (id[0x04] address[0xfec82000] gsi_base[72])
Tue Nov  4 16:53:47 2008 IOAPIC[3]: apic_id 4, version 32, address 0xfec82000, GSI 72-95
Tue Nov  4 16:53:47 2008 ACPI: IOAPIC (id[0x05] address[0xfec82400] gsi_base[96])
Tue Nov  4 16:53:47 2008 IOAPIC[4]: apic_id 5, version 32, address 0xfec82400, GSI 96-119
Tue Nov  4 16:53:47 2008 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
Tue Nov  4 16:53:47 2008 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Tue Nov  4 16:53:47 2008 Enabling APIC mode:  Flat.  Using 5 I/O APICs

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Acked-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-06 07:23:21 +01:00
Ingo Molnar
10e0298686 io_apic: make irq_mis_count available on 64-bit too
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16 16:59:20 +02:00
Thomas Gleixner
d6c88a507e genirq: revert dynarray
Revert the dynarray changes. They need more thought and polishing.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-10-16 16:53:15 +02:00
Thomas Gleixner
ee32c97322 genirq: remove irq_to_desc_alloc
Remove the leftover of sparseirqs.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-10-16 16:53:15 +02:00
Thomas Gleixner
2cc21ef843 genirq: remove sparse irq code
This code is not ready, but we need to rip it out instead of rebasing
as we would lose the APIC/IO_APIC unification otherwise.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-10-16 16:53:15 +02:00
Yinghai Lu
4c66a73f07 x86: sparse_irq: fix typo in debug print out
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16 16:53:13 +02:00
Dean Nelson
4173a0e737 x86, UV: add uv_setup_irq() and uv_teardown_irq() functions, v3
Provide a means for UV interrupt MMRs to be setup with the message to be sent
when an MSI is raised.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16 16:53:12 +02:00
Yinghai Lu
c81bba49a1 x86: print out irq nr for msi/ht, v3
v2: fix hpet compiling error
v3: Bjorn want to use dev_printk instead

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16 16:53:12 +02:00
Cyrill Gorcunov
c1370b49cc x86: io-apic - interrupt remapping fix
Clean up obscure for() cycle with straight while() form

Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: "Maciej W. Rozycki" <macro@linux-mips.org>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16 16:53:12 +02:00
Cyrill Gorcunov
5ffa4eb222 x86: io-apic - interrupt remapping fix
Interrupt remapping could lead to NULL dereference in case of
kzalloc failed and memory leak in other way. So fix the
both cases.

Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: "Maciej W. Rozycki" <macro@linux-mips.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16 16:53:11 +02:00
Yinghai Lu
9d98598d2f sparseirq: remove some debug print out
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16 16:53:11 +02:00
Cyrill Gorcunov
56ffa1a028 x86: io-apic - do not use KERN_DEBUG marker too much, fix
Yinghai Lu reported:

| >  0 add_pin_to_irq: irq 15 --> apic 0 pin 15
| > IOAPIC[0]: Set routing entry (8-15 -> 0x3f -> IRQ 15 Mode:0 Active:0)
| >  8-16 8-17 8-18 8-19 8-20 8-21 8-22 8-23 (apicid-pin) not connected
| >  9-0 9-1 9-2 9-3 9-4 9-5 9-6 9-7 9-8 9-9 9-10 9-11 9-12 9-13 9-14 9-15
| > 9-16 9-17 9-18 9-19 9-20 9-21 9-22 9-23 (apicid-pin) not connected
| >
|
| only first one not connected at first, and ...

here is a quick fix for this.

Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16 16:53:10 +02:00
Cyrill Gorcunov
87783be4c2 x86: io-apic - get rid of __DO_ACTION macro
Replace __DO_ACTION macro with io_apic_modify_irq function.
This allow us to 'grep' definitions being hided by
__DO_ACTION macro:

	__unmask_IO_APIC_irq
	__mask_IO_APIC_irq
	__mask_and_edge_IO_APIC_irq
	__unmask_and_level_IO_APIC_irq

Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Acked-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16 16:53:09 +02:00
Cyrill Gorcunov
2a554fb132 x86: io-apic - do not use KERN_DEBUG marker too much
Do not use KERN_DEBUG several times on the same line being printed.
Introduced by mine previous patch, sorry.

Reported-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16 16:53:08 +02:00
Cyrill Gorcunov
3c2cbd2490 x86: io-apic - code style cleaning for setup_IO_APIC_irqs
By changing printout form we are able to shrink (and clean up) code a bit.

Former printout example:

	init IO_APIC IRQs
	 IO-APIC (apicid-pin) 1-1, 1-2, 1-3 not connected.
	 IO-APIC (apicid-pin) 2-1, 2-2, 2-3 not connected.

New printout example:

	init IO_APIC IRQs
	 1-1 1-2 1-3 (apicid-pin) not connected
	 2-1 2-2 2-3 (apicid-pin) not connected

Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16 16:53:08 +02:00