Commit Graph

251 Commits

Author SHA1 Message Date
Atsushi Nemoto
f2cac67dd3 spi_txx9 controller driver
This is a driver for SPI controller built into TXx9 MIPS SoCs.
This driver is derived from arch/mips/tx4938/toshiba_rbtx4938/spi_txx9.c.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:23:05 -07:00
Samuel Ortiz
ccdc7bf925 SPI: omap2_mcspi driver
Add OMAP24XX McSPI (Multichannel SPI) controller driver.  This driver is
tested very well under OMAP GIT tree with N800 - Nokia Internet Tablet, and
some other OMAP2 boards.

Recent updates included bugfixes, cleanups, speedups, and better
conformance to the current SPI programming interface.  This doesn't yet
understand the third controller instance on the OMAP 2430.

[david-b@pacbell.net: more minor cleanups to the omap2_mcspi driver]
Signed-off-by: Juha Yrjölä <juha.yrjola@solidboot.com>
Signed-off-by: Trilok Soni <soni.trilok@gmail.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:23:05 -07:00
Joakim Tjernlund
f29ba280ec spi_mpc83xx.c: support QE enabled 83xx CPU's like mpc832x
Quicc Engine enabled mpc83xx CPU's has a somewhat different HW interface to
the SPI controller.  This patch adds a qe_mode knob that sees to that
needed adaptions are performed.

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:23:05 -07:00
Andrei Konovalov
ae918c02d3 SPI master driver for Xilinx virtex
Simple SPI master driver for Xilinx SPI controller.
No support for multiple masters.
Not using level 1 drivers from EDK.

[akpm@linux-foundation.org: uninlining]
Signed-off-by: Yuri Frolov <yfrolov@ru.mvista.com>
Signed-off-by: Andrei Konovalov <akonovalov@ru.mvista.com>
Cc: Kumar Gala <galak@gate.crashing.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:23:05 -07:00
Ben Dooks
447aef1a19 SPI: tle620x power switch driver
Add support for the Infineon TLE62x0 series of low-side driver chips, such
as the TLE6220 or TLE6230.  These can be viewed as output GPIOs specialized
for power switching applications.  The driver provides a userspace
interface to those GPIOs, and to the switch status they provide.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:23:05 -07:00
David Brownell
da0abc275f S3c24xx SPI controllers both select 'bitbang'
Tweak Kconfig for the S3C24XX SPI controller drivers.  Both use the bitbang
framework; only one previously said that.  Plus in this case "select" is
the right way to manage that dependency, since folk will not know up front
to enable bitbang in order to even see those S3C drivers in order to enable
them.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:23:05 -07:00
David Brownell
defbd3b4bb atmel_spi: don't always deselect chip between messages
Update chipselect handling for atmel_spi:

  * Teach it how to leave chipselect active between messages; this
    helps various drivers work better.

  * Cope with at91rm0200 errata:  nCS0 can't be managed with GPIOs.
    The MR.PCS value is now updated whenever a chipselect changes.
    (This requires SPI pinmux init for that controller to change,
    and also testing on rm9200; doesn't break at91sam9 or avr32.)

  * Fix minor glitches:  spi_setup() must leave chipselects inactive,
    as must removal of the spi_device.

Also tweak diagnostic messaging to be a bit more useful.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:23:05 -07:00
David Brownell
8da0859a24 atmel_spi: minor updates
Minor updates to atmel_spi:

 - DMA:
    * Comments to explain the DMA policies
    * Report any mapping errors from spi_transfer()
    * Remove extra loop for DMA mapping

 - Diagnostics:  report minimum clock rate, if we need to reject a
   spi_setup() request because that rate is too low.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:23:05 -07:00
Clifford Wolf
698ca47e8d spi_mpc83xx.c underclocking hotfix
The MPC83xx SPI controller clock divider can divide the system clock by not
more then 1024.  The spi_mpc83xx driver does not check this and silently
writes garbage to the SPI controller registers when asked to run at lower
frequencies.  I've tried to run the SPI on a 266MHz MPC8349E with 100kHz
for debugging a bus problem and suddenly was confronted with a 2nd problem
to debug..  ;-)

The patch adds an additional check which avoids writing garbage to the SPI
controller registers and warn the user about it.  This might help others to
avoid simmilar problems.

Cc: Kumar Gala <galak@gate.crashing.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:23:04 -07:00
Kaiwan N Billimoria
78961a5740 spi_lm70llp parport adapter driver
This adds a driver for the LM70-LLP parport adapter, which is an eval board
for the LM70 temperature sensor.  For those without that board, it may be a
simpler example of a parport-to-SPI adapter then spi_butterfly.

Signed-off-by: Kaiwan N Billimoria <kaiwan@designergraphix.com>

Doc, coding style, and interface updates; build fixes.  Minor rename.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:23:04 -07:00
David Brownell
4917d92780 spidev compiler warning gone
Get rid of annoying GCC warning on 32-bit platforms.

drivers/spi/spidev.c: In function 'spidev_message':
drivers/spi/spidev.c:184: warning: cast to pointer from integer of different size
drivers/spi/spidev.c:216: warning: cast to pointer from integer of different size

The trick is to add an extra cast using "ptrdiff_t" to convert the u64 to
the correct size integer, and only then casting it into a "void *" pointer.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:23:04 -07:00
David Brownell
dccd573bb0 SPI controller drivers: check for unsupported modes
Minor SPI controller driver updates: make the setup() methods reject
spi->mode bits they don't support, by masking aginst the inverse of bits
they *do* support.  This insures against misbehavior later when new mode
bits get added.

Most controllers can't support SPI_LSB_FIRST; more handle SPI_CS_HIGH.
Support for all four SPI clock/transfer modes is routine.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:23:04 -07:00
Zhang Rui
91a6902958 sysfs: add parameter "struct bin_attribute *" in .read/.write methods for sysfs binary attributes
Well, first of all, I don't want to change so many files either.

What I do:
Adding a new parameter "struct bin_attribute *" in the
.read/.write methods for the sysfs binary attributes.

In fact, only the four lines change in fs/sysfs/bin.c and
include/linux/sysfs.h do the real work.
But I have to update all the files that use binary attributes
to make them compatible with the new .read and .write methods.
I'm not sure if I missed any. :(

Why I do this:
For a sysfs attribute, we can get a pointer pointing to the
struct attribute in the .show/.store method,
while we can't do this for the binary attributes.
I don't know why this is different, but this does make it not
so handy to use the binary attributes as the regular ones.
So I think this patch is reasonable. :)

Who benefits from it:
The patch that exposes ACPI tables in sysfs
requires such an improvement.
All the table binary attributes share the same .read method.
Parameter "struct bin_attribute *" is used to get
the table signature and instance number which are used to
distinguish different ACPI table binary attributes.

Without this parameter, we need to offer different .read methods
for different ACPI table binary attributes.
This is impossible as there are various ACPI tables on different
platforms, and we don't know what they are until they are loaded.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11 16:09:09 -07:00
Tejun Heo
7b595756ec sysfs: kill unnecessary attribute->owner
sysfs is now completely out of driver/module lifetime game.  After
deletion, a sysfs node doesn't access anything outside sysfs proper,
so there's no reason to hold onto the attribute owners.  Note that
often the wrong modules were accounted for as owners leading to
accessing removed modules.

This patch kills now unnecessary attribute->owner.  Note that with
this change, userland holding a sysfs node does not prevent the
backing module from being unloaded.

For more info regarding lifetime rule cleanup, please read the
following message.

  http://article.gmane.org/gmane.linux.kernel/510293

(tweaked by Greg to not delete the field just yet, to make it easier to
merge things properly.)

Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11 16:09:06 -07:00
Bryan Wu
d6fe89b063 Blackfin SPI driver: fix bug SPI DMA incomplete transmission
SPI writes intermittently drop bytes at end of DMA transfer
http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3205
http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=2892

Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-11 17:34:17 +08:00
Mike Frysinger
27bb9e79bc Blackfin SPI driver: tweak spi cleanup function to match newer kernel changes
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
2007-06-11 15:31:30 +08:00
David Brownell
e44a45ae7b SPI dynamic busid generation bugfix
Fix SPI dynamic bus ID assignment to start at 2^15-1 rather than a negative
number.  Valid bus ids are supposed to be positive, and are (now) stored in
an 's16' value.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-04 13:25:09 -07:00
Andrea Paterniani
ac140a8f83 SPI: Freescale iMX SPI controller driver fixes
Fix 2 bugs:

- SPI_DMA_RHDMA bad value.

- Missing return value in setup() function (lost passing from
  patch-2.6.20-rc4-spi_imx to patch-2.6.20-rc6-spi_imx).

Signed-off-by: Andrea Paterniani <a.paterniani@swapp-eng.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-01 08:18:30 -07:00
Haavard Skinnemoen
5a9a62bb03 atmel_spi dma address bugfix
When either rx_buf or tx_buf is not being used, i.e.  for plain read- or
write operations, the atmel_spi uses a fixed-size DMA buffer instead.  If
the transfer is longer than the size of this buffer, it is split into
multiple DMA transfers.

When the transfer is split like this, the atmel_spi driver ends up using
the same DMA address again and again even for the buffer that came from the
user, which is of course wrong.  Fix this by adding the number of bytes
already transferred to the DMA address so that the data ends up in the
right place.

Thanks to Wu Xuan for discovering this bug.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-01 08:18:29 -07:00
Imre Deak
e5f1b194a9 omap_uwire: SPI_CPHA mode bugfix
The omap_uwire controller driver handles SPI_CPHA incorrectly;
It should mean:

  CPHA=0 ... sample at leading edge of clock
  CPHA=1 ... sample at trailing edge of clock

This bug has been masked by inverse bugs in layered drivers;
and was uncovered by running some of them on non-OMAP hardware.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-23 20:14:15 -07:00
Florin Malita
9bea3f29fc spi: potential memleak in spidev_ioctl
'ioc' should be deallocated if __copy_from_user fails (found by Coverity
- CID 1644).

Signed-off-by: Florin Malita <fmalita@gmail.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-23 20:14:12 -07:00
Domen Puncer
da90fa8ff6 spi/spidev: check message size before copying
Message size needs to be checked before copying, or bad things could
happen.

Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-23 20:14:12 -07:00
Domen Puncer
8888735fca mpc52xx_psc_spi: fix it for CONFIG_PPC_MERGE
Fix mpc5200 PSC SPI driver to actually work for CONFIG_PPC_MERGE
 - s/mpc52xx/mpc5200/, as this was changed in device tree some time ago
 - fix spi id detection

The move from 'ppc' to 'powerpc' didn't quite match the latest
kernel.org code.

Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
Acked-by: Dragos Carp <dragos.carp@toptica.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-23 20:14:11 -07:00
Bryan Wu
88b4036934 Blackfin SPI: cleanup according to David Brownell's review
a) platorm_driver_probe(...) instead of platform_driver_register(&driver);
b) set bfin_spi_enable and bfin_spi_disable static
c) Why is the width flag a u32?
d) maybe use dev_dbg() instead of pr_debug()

Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-21 09:50:24 -07:00
Domen Puncer
0a4dd7783d spi: fix spidev for >sizeof(long)/32 devices
find_first_zero_bit accepts number of bits, not longs.

Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-16 21:19:15 -07:00
Dragos Carp
00b8fd2367 MPC52xx PSC SPI master driver
SPI master driver for MPC52xx using its Programmable Serial Controller.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Dragos Carp <dragos.carp@toptica.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-11 08:29:35 -07:00
Martin Schwidefsky
e25df1205f [S390] Kconfig: menus with depends on HAS_IOMEM.
Add "depends on HAS_IOMEM" to a number of menus to make them
disappear for s390 which does not have I/O memory.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-05-10 15:46:07 +02:00
Haavard Skinnemoen
a1e3cf418f atmel_spi: remove unnecessary (and wrong) #ifdefs
Now that the cpu_is_xxx() macros are available both on AVR32 and AT91, we can
remove a couple of #ifdefs from this driver.  One of them is actually wrong --
new_1 should be set on AVR32 but isn't.  This causes the bus clock to run at
twice the speed it is configured to.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: David Brownell <david-b@pacbell.net>
Acked-by: Andrew Victor <andrew@sanpeople.com>
Cc: Nicolas Ferre <nicolas.ferre@rfo.atmel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09 12:30:50 -07:00
Jan Nikitenko
63bd23591e au1550 SPI controller driver
Here is a driver for the Alchemy au1550 PSC (Programmable Serial
Controller) in SPI master mode.

It supports dma transfers using the Alchemy descriptor based dma controller
for 4-8 bits per word SPI transfers.  For 9-24 bits per word transfers, pio
irq based mode is used to avoid setup of dma channels from scratch on each
number of bits per word change.

Tested with au1550; this may also work on other MIPS Alchemy cpus, like
au1200/au1210/au1250.  Used extensively with SD card connected via SPI;
this handles 8.1MHz SPI clock transfers using dma without any problem (the
highest SPI clock freq possible with au1550 running on 324MHz).

The driver supports sharing of SPI bus by multiple devices.  All features
of Alchemy SPI mode are supported (all SPI modes, msb/lsb first, bits per
word in 4-24 range).

As the SPI clock of the controller depends on main input clock that shall
be configured externally, platform data structure for au1550 SPI controller
driver contains mainclk_hz attribute to define the input clock rate.  From
this value, dividers of the controller for SPI clock are set up for
required frequency.

Signed-off-by: Jan Nikitenko <jan.nikitenko@gmail.com>

Whitespace and section fixups.  Remove partial workaround for platform
setup bug in dma_mask setup; it couldn't work with multiple controllers.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:16 -07:00
David Brownell
33e34dc6ee SPI kerneldoc
Various documentation updates for the SPI infrastructure, to clarify things
that may not have been clear, to cope with lack of editing, and fix
omissions.

Also, plug SPI into the kernel-api DocBook template, and fix all the
resulting glitches in document generation.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:16 -07:00
Andrea Paterniani
814a8d50eb /dev/spidevB.C interface
Add a filesystem API for <linux/spi/spi.h> stack.  The initial version of
this interface is purely synchronous.

dbrownell@users.sourceforge.net:

 Cleaned up, bugfixed; much simplified; added preliminary documentation.

 Works with mdev given CONFIG_SYSFS_DEPRECATED; and presumably udev.

 Updated SPI_IOC_MESSAGE ioctl to full spi_message semantics, supporting
 groups of one or more transfers (each of which may be full duplex if
 desired).

 This is marked as EXPERIMENTAL with an explicit disclaimer that the API
 (notably the ioctls) is subject to change.

Signed-off-by: Andrea Paterniani <a.paterniani@swapp-eng.it>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:15 -07:00
David Brownell
735ce95e6b minor spi_butterfly cleanup
Simplify the spi_butterfly driver by removing incomplete/unused support for
the second SPI bus, implemented by the USI controller.  This should make
this a clearer example of how to write a parport bitbang driver.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:15 -07:00
David Brownell
da67529642 layered parport code uses parport->dev
Update some of the layered parport_driver code to use parport->dev:

	- i2c-parport (parent of i2c_adapter)
	- spi_butterfly (parent of spi_master, allowing cruft removal)
	- lp (creating class_device)
	- ppdev (parent of parportN device)
	- tipar (creating class_device)

There are still drivers that should be updated, like some of the input
drivers; but they won't be any worse off than they are today.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Greg KH <greg@kroah.com>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:05 -07:00
Arnaud Patard
35c74823cb spi_s3c24xx.c: Fix build
Commit a836f5856a removes the shutdown
member of the bitbang structure, breaking the build of spi_s3c24xx.c.

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 12:13:04 -07:00
Wu, Bryan
a5f6abd4f7 Blackfin: blackfin on-chip SPI controller driver
This patch implements the driver necessary use the Analog Devices Blackfin
processor's SPI Port.

Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 12:12:58 -07:00
Ben Dooks
3d2c5b415c spi: fix use of set_cs in spi_s3c24xx driver
It turns out that the last patch to change set_cs to be kept in the
controller's structure instead of the platform data was an incomplete
change, and did not change the references to platfrom data in the setup
xfer code.  (This can prevent an oops.)

Reported-by: <Ling.Alex@iac.com.tw>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-17 16:36:27 -07:00
Adrian Bunk
e9d5a46115 [PATCH] drivers/spi/: fix section mismatches
WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:spi_register_master from .text between 'spi_bitbang_start' (at offset 0x84e11a) and 'bitbang_work'
  WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:spi_alloc_master from .text between 'butterfly_attach' (at offset 0x84e681) and 'at25_remove'
  WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:spi_new_device from .text between 'butterfly_attach' (at offset 0x84e7e4) and 'at25_remove'

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-27 09:05:15 -07:00
Arnaud Patard (Rtp
6c912a3d33 [PATCH] spi_s3c24xx.c: warning fix
The set_cs field of struct s3c24xx_spi is declared as returning a int but
the value returned but set_cs is never fixed.  Moreover, the default
function for set_cs and the set_cs defintion in the platform data are
returning void.

I'm proposing to change the prototype to void (*set_cs)(...). By doing
this, I'm also fixing 2 build warnings:

  drivers/spi/spi_s3c24xx.c: In function 's3c24xx_spi_probe':
  drivers/spi/spi_s3c24xx.c:330: warning: assignment from incompatible pointer type
  drivers/spi/spi_s3c24xx.c:335: warning: assignment from incompatible pointer type

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-16 19:25:06 -07:00
Atsushi Nemoto
c6ca97d26a [PATCH] SPI: at25: do not use pointer before assignment
Prevents a potential oops with CONFIG_SPI_DEBUG given flakey hardware or
incorrect configuration.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-16 19:25:05 -07:00
David Brownell
28735a7253 [PATCH] gpio_direction_output() needs an initial value
It's been pointed out that output GPIOs should have an initial value, to
avoid signal glitching ...  among other things, it can be some time before
a driver is ready.  This patch corrects that oversight, fixing

 - documentation
 - platforms supporting the GPIO interface
 - users of that call (just one for now, others are pending)

There's only one user of this call for now since most platforms are still
using non-generic GPIO setup code, which in most cases already couples the
initial value with its "set output mode" request.

Note that most platforms are clear about the hardware letting the output
value be set before the pin direction is changed, but the s3c241x docs are
vague on that topic ...  so those chips might not avoid the glitches.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Andrew Victor <andrew@sanpeople.com>
Acked-by: Milan Svoboda <msvoboda@ra.rockwell.com>
Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-16 19:25:04 -07:00
Chris Lesiak
a836f5856a [PATCH] spi: destroy workqueue after spi_unregister_master
Fix a bug in the cleanup of an spi_bitbang bus.

The workqueue associated with the bus was destroyed before the call to
spi_unregister_master.  That meant that spi devices on that bus would be
unable to do IO in their remove method.  The shutdown flag should have been
able to prevent a segfault, but was never getting set.  By waiting to
destroy the workqueue until after the master is unregistered, devices are
able to do IO in their remove methods.  An added benefit is that neither
the shutdown flag nor a wait for the queue of messages to empty is needed.

Signed-off-by: Chris Lesiak <chris.lesiak@licor.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-16 19:25:04 -07:00
Harald Welte
d23c6c21af [PATCH] spi_s3c2410_gpio.c spi mode 2 and 3 support
Add transfer modes 2 and 3 to the S3C24XX gpio SPI driver

Signed-off-by: Harald Welte <laforge@openmoko.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20 17:10:16 -08:00
David Brownell
bb2d1c36c7 [PATCH] SPI controller build/warning fixes
The signature of the per-device cleanup() routine changed to remove its
const-ness.  Three new SPI controller drivers now need that change, to
eliminate build warnings.

This also fixes a build bug with atmel_spi on AT91 systems.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20 17:10:16 -08:00
Haavard Skinnemoen
754ce4f299 [PATCH] SPI: atmel_spi driver
Driver for the Atmel on-chip SPI master controller.

Tested primarily on AVR32/AT32AP7000/ATSTK1000 using mtd_dataflash and the
jffs2 filesystem.  Should also work fine on various AT91 ARM-based chips
like AT91SAM926x and AT91RM9200.

Hardware documentation can be found in the AT32AP7000 data sheet, or its
AT91 siblings, which can be downloaded from

http://www.atmel.com/dyn/products/datasheets.asp?family_id=682

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:53 -08:00
David Brownell
b587b13a4f [PATCH] SPI eeprom driver
This is adds a simple SPI EEPROM driver, providing access to the EEPROM
through sysfs much like the I2C "eeprom" driver ...  except this driver
supports write access, and multiple EEPROM sizes.

From: "Tuppa, Walter" <walter.tuppa@siemens.com>

Since I have EEPROMs on SPI with different address sizing, I made some
changes to your at25.c to support them.  Works perfectly.  (Also includes a
small bugfix for the "what size address" test.)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Walter Tuppa <walter.tuppa@siemens.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 09:48:31 -08:00
Hans-Peter Nilsson
0ffa028505 [PATCH] SPI cleanup() method param becomes non-const
I'd like to assign NULL to kfree()d members of a structure.  I can't do
that without ugly casting (see the PXA patch) when the structure pointed to
is const-qualified.  I don't really see a reason why the cleanup method
isn't allowed to alter the object it should clean up.  :-)

No, I didn't test the PXA patch, but I verified that the NULL-assignment
doesn't stop me from doing rmmod/insmodding my own spi_bitbang-based
driver.

Signed-off-by: Hans-Peter Nilsson <hp@axis.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 09:48:31 -08:00
Hans-Peter Nilsson
7f8c7619ea [PATCH] spi_bitbang(): use overridable setup_transfer() method
A small bug-fix for spi_bitbang: it must always call the setup_transfer
function via the overridable pointer, not assume that its
spi_bitbang_setup_transfer is sufficient.  Otherwise, if all options in the
transfers are default (0), the overrided function will never be called.

Granted, the function replacing it must call spi_bitbang_setup_transfer,
but it might also have other important things to do, even if the second
argument (the spi_transfer) is NULL.  Tested together with the other
patches on the spi_crisv32_sser and spi_crisv32_gpio drivers (not yet in
the kernel, will IIUC be submitted as part of the usual
arch-maintainer-pushes).

Signed-off-by: Hans-Peter Nilsson <hp@axis.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 09:48:31 -08:00
Andrea Paterniani
69c202afa8 [PATCH] SPI: Freescale iMX SPI controller driver (BIS+)
Add the SPI controller driver for Freescale i.MX(S/L/1).
Main features summary:

 > Per chip setup via board specific code and/or protocol driver.
 > Per transfer setup.
 > PIO transfers.
 > DMA transfers.
 > Managing of NULL tx / rx buffer for rd only / wr only transfers.

This patch replace patch-2.6.20-rc4-spi_imx with the following changes:
 > Few cosmetic changes.
 > Function map_dma_buffers now return 0 for success and -1 for failure.
 > Solved a bug inside spi_imx_probe function (wrong error path).
 > Solved a bug inside setup function (bad undo setup for max_speed_hz).
 > For read-only transfers, always write zero bytes.

This is almost the same as the 'BIS' version sent by Andrea, except for
updating the 'DUMMY' byte so that read-only transfers shift out zeroes.
That part of the API changed recently, since some half duplex peripheral
chips require that semantic.

Signed-off-by: Andrea Paterniani <a.paterniani@swapp-eng.it>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 09:48:30 -08:00
David Brownell
fdb3c18d63 [PATCH] SPI controller driver for OMAP Microwire
This adds a SPI driver for the Microwire controller on OMAP1 chips.  This
driver has been used in the Linux-OMAP tree for some time now, including
with some of those displays using standardized 9-bit commands followed by
data with 8-bit words.

Microwire only supports half duplex transfers, but that's all that most SPI
protocols need.  When full duplex, or higher speeds, are needed there are
several other controllers that can be used on OMAP.

[akpm@osdl.org: cleanups]
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Imre Deak <imre.deak@solidboot.com>
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 09:48:30 -08:00
David Brownell
85abfaa782 [PATCH] SPI Kconfig fix
Minor Kconfig cleanup ... put the SPI_S3C24XX entry in the
correct location (alphabetical order).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 09:48:30 -08:00
Greg Kroah-Hartman
07b2463046 Revert "Driver core: convert SPI code to use struct device"
This reverts commit 2943ecf2ed.

This should go through the SPI maintainer, it was my fault that it did
not.  Especially as it conflicts with other patches he has pending.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 21:34:08 -08:00
Greg Kroah-Hartman
2943ecf2ed Driver core: convert SPI code to use struct device
Converts from using struct "class_device" to "struct device" making
everything show up properly in /sys/devices/ with symlinks from the
/sys/class directory.

Cc: <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 10:37:11 -08:00
Atsushi Nemoto
1e9a51dca1 [PATCH] SPI: alternative fix for spi_busnum_to_master
If a SPI master device exists, udev (udevtrigger) causes kernel crash, due
to wrong kobj pointer in kobject_uevent_env().  This problem was not in
2.6.19.

The backtrace (on MIPS) was:
[<8024db6c>] kobject_uevent_env+0x54c/0x5e8
[<802a8264>] store_uevent+0x1c/0x3c  (in drivers/class.c)
[<801cb14c>] subsys_attr_store+0x2c/0x50
[<801cb80c>] flush_write_buffer+0x38/0x5c
[<801cb900>] sysfs_write_file+0xd0/0x190
[<80181444>] vfs_write+0xc4/0x1a0
[<80181cdc>] sys_write+0x54/0xa0
[<8010dae4>] stack_done+0x20/0x3c

flush_write_buffer() passes kobject of spi_master_class.subsys to
subsys_addr_store(), then subsys_addr_store() passes a pointer to a struct
subsystem to store_uevent() which expects a pointer to a struct
class_device.  The problem seems subsys_attr_store() called instead of
class_device_attr_store().

This mismatch was caused by commit
3bd0f69435, which overrides kset of master
class.  This made spi_master_class.subsys.kset.ktype NULL so
subsys_sysfs_ops is used instead of class_dev_sysfs_ops.

The commit was to fix spi_busnum_to_master().  Here is a patch fixes
this function in other way, just searching children list of
class_device.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-01-26 13:50:58 -08:00
Justin Clacherty
7f6ee1adc7 [PATCH] spi: fix error setting the spi mode in pxa2xx_spi.c
Currently the spi mode can be set to the wrong mode if you are switching
from any mode other than mode 0.  This is because the mode is set using a
bitwise or on uncleared bits.  The following patch clears the mode bits
before setting the new mode.  I've also modified it to use the appropriate
defines from pxa-regs.h for readability.

Signed-off-by: Justin Clacherty <justin@redfish-group.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-01-26 13:50:57 -08:00
Ben Dooks
8736b9270c [PATCH] S3C24XX: fix passing spi chipselect to select routine
It turns out that the spi chipselect was not being passed to the set_cs
routine if one was specified in the platform data.

As part of the fix, change to using a set_cs field in the controller state,
and put a default gpio routine in if the data passed does not specify it.

Also remove the //#define DEBUG

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-01-26 13:50:57 -08:00
Arnaud Patard (Rtp
e2a5d2f9b3 [PATCH] spi_s3c24xx_gpio: use right header
Russel King recently reminded us that one shouldn't use asm/arch/hardware.h
but one should use asm/hardware.h.  Unfortunately, the spi_s3c24xx_gpio
driver is using the wrong header.  This patch is fixing that.

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-30 10:56:43 -08:00
David Brownell
4b1badf5d9 [PATCH] SPI: define null tx_buf to mean "shift out zeroes"
Some issues were recently turned up with the current specification of what
it means for spi_transfer.tx_buf to be null, as part of transfers which are
(from the SPI protocol driver perspective) pure reads.

Specifically, that it seems better to change the TX behaviour there from
"undefined" to "will shift zeroes".  This lets protocol drivers (like the
ads7846 driver) depend on that behavior.  It's what most controller drivers
in the tree are already doing (with one exception and one case of driver
wanting-to-oops), it's what Microwire hardware will necessarily be doing,
and it removes an issue whereby certain security audits would need to
define such a value anyway as part of removing covert channels.

This patch changes the specification to require shifting zeroes, and
updates all currently merged SPI controller drivers to do so.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-30 10:56:42 -08:00
Ben Dooks
6d3a25f1fb [PATCH] fix s3c24xx gpio driver (include linux/workqueue.h)
The general gpio driver includes seem to now depend on having
<linux/workqueue.h> included before they are.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-22 08:55:51 -08:00
Stephen Street
8d94cc50aa [PATCH] spi: stabilize PIO mode transfers on PXA2xx systems
Stabilize PIO mode transfers against a range of word sizes and FIFO
thresholds and fixes word size setup/override issues.

1) 16 and 32 bit DMA/PIO transfers broken due to timing differences.
2) Potential for bad transfer counts due to transfer size assumptions.
3) Setup function broken is multiple ways.
4) Per transfer bit_per_word changes break DMA setup in pump_tranfers.
5) False positive timeout are not errors.
6) Changes in pxa2xx_spi_chip not effective in calls to setup.
7) Timeout scaling wrong for PXA255 NSSP.
8) Driver leaks memory while busy during unloading.

Known issues:

SPI_CS_HIGH and SPI_LSB_FIRST settings in struct spi_device are not handled.

Testing:

This patch has been test against the "random length, random bits/word,
random data (verified on loopback) and stepped baud rate by octaves
(3.6MHz to 115kHz)" test.  It is robust in PIO mode, using any
combination of tx and rx thresholds, and also in DMA mode (which
internally computes the thresholds).

Much thanks to Ned Forrester for exhaustive reviews, fixes and testing.
The driver is substantially better for his efforts.

Signed-off-by: Stephen Street <stephen@streetfiresound.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 09:55:40 -08:00
Akinobu Mita
7b92ff01c2 [PATCH] spi: check platform_device_register_simple() error
Check the return value of platform_device_register_simple().

Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:42 -08:00
Hans-Christian Egtvedt
3bd0f69435 [PATCH] spi: set kset of master class dev explicitly
<quote Imre Deak from Thu, 12 Jan 2006 21:18:54 +0200>
  In order for spi_busnum_to_master to work spi master devices must be linked
  into the spi_master_class.subsys.kset list.  At the moment the default
  class_obj_subsys.kset is used and we can't enumerate the master devices.
</quote>

Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:33 -08:00
Hans-Christian Egtvedt
4740d387f3 [PATCH] spi: correct bus_num and buffer bug in spi core
Correct the following in driver/spi/spi.c in function spi_busnum_to_master:

 * must allow bus_num 0, the if is really not needed.
 * correct the name buffer which is too small for bus_num >= 10000. It

should be 9 bytes big, not 8.

Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:32 -08:00
Jeff Garzik
89fc9a1a79 [PATCH] SPI: improve sysfs compiler complaint handling
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:31 -08:00
Christoph Lameter
e94b176609 [PATCH] slab: remove SLAB_KERNEL
SLAB_KERNEL is an alias of GFP_KERNEL.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:24 -08:00
David Howells
6d5aefb8ea WorkQueue: Fix up arch-specific work items where possible
Fix up arch-specific work items where possible to use the new work_struct and
delayed_work structs.

Three places that enqueue bits of their stack and then return have been marked
with #error as this is not permitted.

Signed-Off-By: David Howells <dhowells@redhat.com>
2006-12-05 19:36:26 +00:00
David Howells
9db7372445 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:

	drivers/ata/libata-scsi.c
	include/linux/libata.h

Futher merge of Linus's head and compilation fixups.

Signed-Off-By: David Howells <dhowells@redhat.com>
2006-12-05 17:01:28 +00:00
David Howells
4c1ac1b491 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:

	drivers/infiniband/core/iwcm.c
	drivers/net/chelsio/cxgb2.c
	drivers/net/wireless/bcm43xx/bcm43xx_main.c
	drivers/net/wireless/prism54/islpci_eth.c
	drivers/usb/core/hub.h
	drivers/usb/input/hid-core.c
	net/core/netpoll.c

Fix up merge failures with Linus's head and fix new compilation failures.

Signed-Off-By: David Howells <dhowells@redhat.com>
2006-12-05 14:37:56 +00:00
Al Viro
914e26379d [PATCH] severing fs.h, radix-tree.h -> sched.h
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-12-04 02:00:24 -05:00
Matt LaPlante
3cb2fccc5f Fix misc Kconfig typos
Fix various Kconfig typos.

Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-30 05:22:59 +01:00
David Howells
c4028958b6 WorkStruct: make allyesconfig
Fix up for make allyesconfig.

Signed-Off-By: David Howells <dhowells@redhat.com>
2006-11-22 14:57:56 +00:00
Andrew Morton
d3e5a938e7 [PATCH] spi section fix
WARNING: vmlinux - Section mismatch: reference to .init.text:spi_register_board_info from __ksymtab_gpl between '__ksymtab_spi_register_board_info' (at offset 0xc032f7d0) and '__ksymtab_spi_alloc_master'

Fix this by removing the export.

Acked-by: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-03 12:27:58 -08:00
Jeff Garzik
c7bec5aba5 Various drivers' irq handlers: kill dead code, needless casts
- Eliminate casts to/from void*

- Eliminate checks for conditions that never occur.  These typically
  fall into two classes:

	1) Checking for 'dev_id == NULL', then it is never called with
	NULL as an argument.

	2) Checking for invalid irq number, when the only caller (the
	system) guarantees the irq handler is called with the proper
	'irq' number argument.

Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-06 15:00:58 -04:00
David Howells
7d12e780e0 IRQ: Maintain regs pointer globally rather than passing to IRQ handlers
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.

The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around.  On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).

Where appropriate, an arch may override the generic storage facility and do
something different with the variable.  On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.

Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions.  Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller.  A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.

I've build this code with allyesconfig for x86_64 and i386.  I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.

This will affect all archs.  Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

	struct pt_regs *old_regs = set_irq_regs(regs);

And put the old one back at the end:

	set_irq_regs(old_regs);

Don't pass regs through to generic_handle_irq() or __do_IRQ().

In timer_interrupt(), this sort of change will be necessary:

	-	update_process_times(user_mode(regs));
	-	profile_tick(CPU_PROFILING, regs);
	+	update_process_times(user_mode(get_irq_regs()));
	+	profile_tick(CPU_PROFILING);

I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().

Some notes on the interrupt handling in the drivers:

 (*) input_dev() is now gone entirely.  The regs pointer is no longer stored in
     the input_dev struct.

 (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking.  It does
     something different depending on whether it's been supplied with a regs
     pointer or not.

 (*) Various IRQ handler function pointers have been moved to type
     irq_handler_t.

Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 15:10:12 +01:00
Dave Jones
038b0a6d8d Remove all inclusions of <linux/config.h>
kbuild explicitly includes this at build time.

Signed-off-by: Dave Jones <davej@redhat.com>
2006-10-04 03:38:54 -04:00
Ingo Molnar
60be6b9a41 [PATCH] lockdep: annotate on-stack completions
lockdep needs to have the waitqueue lock initialized for on-stack waitqueues
implicitly initialized by DECLARE_COMPLETION().  Annotate on-stack completions
accordingly.

Has no effect on non-lockdep kernels.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 15:27:09 -07:00
Jörn Engel
6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
David Brownell
980a01c9bf [PATCH] SPI: infrastructure to initialize spi_device.mode early
This patch adds earlier initialization of spi_device.mode, as needed
on boards using nondefault chipselect polarity.  An example would be
ones using the RS5C348 RTC without an external signal inverter between
the RTC chipselect and the SPI controller.

Without this mechanism, the first setup() call for that chip would
wrongly enable chips, corrupting transfers to/from other chips sharing
that SPI bus.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-28 15:51:01 -07:00
Ben Dooks
ac88bcff2f [PATCH] s3c24xx: fix spi driver with CONFIG_PM
Fix compile bug with the S3C24XX SPI driver when CONFIG_PM is set.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-26 11:55:46 -07:00
Stephen Street
5daa3ba0c6 [PATCH] pxa2xx-spi update
Fix some outstanding issues with the pxa2xx_spi driver when running on a
PXA270:

- Wrong timeout calculation in the setup function due to different
  peripheral clock rates in the PXAxxx family.

- Bad handling of SSSR_TFS interrupts in interrupt_transfer function.

- Added locking to interface between the pump_messages workqueue and the
  pump_transfers tasklet.

Much thanks to Juergen Beisert for the extensive testing on the PXA270.

Signed-off-by: Stephen Street <stephen@streetfiresound.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-21 12:59:20 -07:00
Ben Dooks
7fba53402e [PATCH] S3C24XX: hardware SPI driver
Hardware based SPI driver for Samsung S3C24XX SoC systems

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Cc: David Brownell <david-b@pacbell.net>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-21 12:59:19 -07:00
Ben Dooks
1fc7547d4b [PATCH] S3C24XX: GPIO based SPI driver
SPI driver for SPI by GPIO on the Samsung S3C24XX series of SoC processors.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Cc: Greg KH <greg@kroah.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-21 12:59:19 -07:00
Kumar Gala
ccf06998fe [PATCH] spi: add spi master driver for Freescale MPC83xx SPI controller
This driver supports the SPI controller on the MPC83xx SoC devices from
Freescale.  Note, this driver supports only the simple shift register SPI
controller and not the descriptor based CPM or QUICCEngine SPI controller.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-21 12:59:19 -07:00
dmitry pervushin
ba1a051319 [PATCH] minor SPI doc fix
Because several developers asked me about referenced but missing
spi_add_master(), I think that this patch should be applied ...  it
corrects comments so they refer to spi_register_master() instead.

Signed-off-by: dmitry pervushin <dpervushin@ru.mvista.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-21 12:59:19 -07:00
David Brownell
1e316d7566 [PATCH] SPI: spi_bitbang: clocking fixes
This fixes two problems triggered by the MMC stack updating clocks:

 - SPI masters driver should accept a max clock speed of zero; that's one
   convention for marking idle devices.  (Presumably that helps controllers
   that don't autogate clocks to "off" when not in use.)

 - There are more than 1000 nanoseconds per millisecond; setting the clock
   down to 125 KHz now works properly.

Showing once again that Zero (http://en.wikipedia.org/wiki/Zero) is still
an inexhaustible number of bugs.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-16 14:33:58 -07:00
Stephen Street
9708c121c3 [PATCH] spi: Update to PXA2xx SPI Driver
Fix two outstanding issues with the pxa2xx_spi driver:

1) Bad cast in the function u32_writer. Thanks to Henrik Bechmann
2) Adds support for per transfer changes to speed and bits per word

Signed-off-by: Stephen Street <stephen@streetfiresound.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-16 14:33:58 -07:00
David Brownell
a020ed7521 [PATCH] SPI: busnum == 0 needs to work
We need to be able to have a "SPI bus 0" matching chip numbering; but
that number was wrongly used to flag dynamic allocation of a bus number.

This patch resolves that issue; now negative numbers trigger dynamic alloc.

It also updates the how-to-write-a-controller-driver overview to mention
this stuff.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-16 14:33:57 -07:00
David Brownell
ccf77cc4af [PATCH] SPI: devices can require LSB-first encodings
Add spi_device hook for LSB-first word encoding, and update all the
(in-tree) controller drivers to reject such devices.  Eventually,
some controller drivers will be updated to support lsb-first encodings
on the wire; no current drivers need this.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-16 14:33:57 -07:00
Kumar Gala
ff9f4771b5 [PATCH] SPI: Renamed bitbang_transfer_setup to spi_bitbang_setup_transfer and export it
Renamed bitbang_transfer_setup to follow convention of other exported symbols
from spi-bitbang.  Exported spi_bitbang_setup_transfer to allow users of
spi-bitbang to use the function in their own setup_transfer.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-16 14:33:57 -07:00
David Brownell
a9948b6194 [PATCH] SPI: spi bounce buffer has a minimum length
Make sure that spi_write_then_read() can always handle at least 32 bytes
of transfer (total, both directions), minimizing one portability issue.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-16 14:33:57 -07:00
Stephen Street
e0c9905e87 [PATCH] SPI: add PXA2xx SSP SPI Driver
This driver turns a PXA2xx synchronous serial port (SSP) into a SPI master
controller (see Documentation/spi/spi_summary).  The driver has the following
features:

- Support for any PXA2xx SSP
- SSP PIO and SSP DMA data transfers.
- External and Internal (SSPFRM) chip selects.
- Per slave device (chip) configuration.
- Full suspend, freeze, resume support.

Signed-off-by: Stephen Street <stephen@streetfiresound.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-16 14:33:56 -07:00
Imre Deak
4cff33f94f [PATCH] SPI: per-transfer overrides for wordsize and clocking
Some protocols (like one for some bitmap displays) require different clock
speed or word size settings for each transfer in an SPI message. This adds
those parameters to struct spi_transfer.  They are to be used when they are
nonzero; otherwise the defaults from spi_device are to be used.

The patch also adds a setup_transfer callback to spi_bitbang, uses it for
messages that use those overrides, and implements it so that the pure
bitbanging code can help resolve any questions about how it should work.

Signed-off-by: Imre Deak <imre.deak@nokia.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-16 14:33:56 -07:00
Stephen Street
d2799f083d [PATCH] spi: Fix modular master driver remove and device suspend/remove
Fix two problems in the spi subsystem:

1) spi subsystem core dumps when modular spi master is unloaded.
2) spi subsystem core dumps when spi slave device is suspended/resumed and
   module slave driver is not loaded.

Signed-off-by: Stephen Street <stephen@streetfiresound.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-20 20:00:09 -08:00
David Brownell
9c1da3cb46 [PATCH] SPI: spi_butterfly, restore lost deltas
This resolves some minor version skew glitches that accumulated for the AVR
Butterfly adapter driver, which caused among other things the existence of
a duplicate Kconfig entry.  Most of it boils down to comment updates, but in
one case it removes some now-superfluous code that would be better if not
copied into other controller-level drivers.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2006-02-06 12:17:17 -08:00
David Brownell
2e10c84b9c [PATCH] SPI: add spi_butterfly driver
This adds a bitbanging parport based adaptor cable for AVR Butterfly, giving
SPI links to its DataFlash chip and (eventually) firmware running in the card.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-13 16:29:56 -08:00
Andrew Morton
5d870c8e21 [PATCH] spi: remove fastcall crap
gcc4 generates warnings when a non-FASTCALL function pointer is assigned to a
FASTCALL one.  Perhaps it has taste.

Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-13 16:29:56 -08:00
David Brownell
7111763d39 [PATCH] spi: misc fixes
This collects some small SPI patches that seem to be missing from the MM tree:

  - spi_butterfly kbuild hooks got dropped somehow; this restores them
  - quick fix for a (theoretical?) m25p80_write() oops noted by Andrew
  - quick fix for a potential config-specific oops for mtd_dataflash()
  - minor doc tweaks

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-13 16:29:56 -08:00
Vitaly Wool
8275c642cc [PATCH] spi: use linked lists rather than an array
This makes the SPI core and its users access transfers in the SPI message
structure as linked list not as an array, as discussed on LKML.

From: David Brownell <dbrownell@users.sourceforge.net>

  Updates including doc, bugfixes to the list code, add
  spi_message_add_tail().  Plus, initialize things _before_ grabbing the
  locks in some cases (in case it grows more expensive).  This also merges
  some bitbang updates of mine that didn't yet make it into the mm tree.

Signed-off-by: Vitaly Wool <vwool@ru.mvista.com>
Signed-off-by: Dmitry Pervushin <dpervushin@gmail.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-13 16:29:56 -08:00
David Brownell
9904f22a72 [PATCH] spi: add spi_bitbang driver
This adds a bitbanging spi master, hooking up to board/adapter-specific glue
code which knows how to set and read the signals (gpios etc).

This code kicks in after the glue code creates a platform_device with the
right platform_data.  That data includes I/O loops, which will usually
come from expanding an inline function (provided in the header).  One goal
is that the I/O loops should be easily optimized down to a few GPIO register
accesses, in common cases, for speed and minimized overhead.

This understands all the currently defined protocol tweaking options in the
SPI framework, and might eventually serve as as reference implementation.

  - different word sizes (1..32 bits)
  - differing clock rates
  - SPI modes differing by CPOL (affecting chip select and I/O loops)
  - SPI modes differing by CPHA (affecting I/O loops)
  - delays (usecs) after transfers
  - temporarily deselecting chips in mid-transfer

A lot of hardware could work with this framework, though common types of
controller can't reach peak performance without switching to a driver
structure that supports pipelining of transfers (e.g.  DMA queues) and maybe
controllers (e.g.  IRQ driven).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-13 16:29:55 -08:00
David Brownell
0c868461fc [PATCH] SPI core tweaks, bugfix
This includes various updates to the SPI core:

  - Fixes a driver model refcount bug in spi_unregister_master() paths.

  - The spi_master structures now have wrappers which help keep drivers
    from needing class-level get/put for device data or for refcounts.

  - Check for a few setup errors that would cause oopsing later.

  - Docs say more about memory management.  Highlights the use of DMA-safe
    i/o buffers, and zero-initializing spi_message and such metadata.

  - Provide a simple alloc/free for spi_message and its spi_transfer;
    this is only one of the possible memory management policies.

Nothing to break code that already works.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-13 16:29:55 -08:00
David Brownell
b885244eb2 [PATCH] spi: add spi_driver to SPI framework
This is a refresh of the "Simple SPI Framework" found in 2.6.15-rc3-mm1
which makes the following changes:

  * There's now a "struct spi_driver".  This increase the footprint
    of the core a bit, since it now includes code to do what the driver
    core was previously handling directly.  Documentation and comments
    were updated to match.

  * spi_alloc_master() now does class_device_initialize(), so it can
    at least be refcounted before spi_register_master().  To match,
    spi_register_master() switched over to class_device_add().

  * States explicitly that after transfer errors, spi_devices will be
    deselected.  We want fault recovery procedures to work the same
    for all controller drivers.

  * Minor tweaks:  controller_data no longer points to readonly data;
    prevent some potential cast-from-null bugs with container_of calls;
    clarifies some existing kerneldoc,

And a few small cleanups.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-13 16:29:54 -08:00
David Brownell
8ae12a0d85 [PATCH] spi: simple SPI framework
This is the core of a small SPI framework, implementing the model of a
queue of messages which complete asynchronously (with thin synchronous
wrappers on top).

  - It's still less than 2KB of ".text" (ARM).  If there's got to be a
    mid-layer for something so simple, that's the right size budget.  :)

  - The guts use board-specific SPI device tables to build the driver
    model tree.  (Hardware probing is rarely an option.)

  - This version of Kconfig includes no drivers.  At this writing there
    are two known master controller drivers (PXA/SSP, OMAP MicroWire)
    and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML
    mentions of other drivers in development.

  - No userspace API.  There are several implementations to compare.
    Implement them like any other driver, and bind them with sysfs.

The changes from last version posted to LKML (on 11-Nov-2005) are minor,
and include:

  - One bugfix (removes a FIXME), with the visible effect of making device
    names be "spiB.C" where B is the bus number and C is the chipselect.

  - The "caller provides DMA mappings" mechanism now has kerneldoc, for
    DMA drivers that want to be fancy.

  - Hey, the framework init can be subsys_init.  Even though board init
    logic fires earlier, at arch_init ... since the framework init is
    for driver support, and the board init support uses static init.

  - Various additional spec/doc clarifications based on discussions
    with other folk.  It adds a brief "thank you" at the end, for folk
    who've helped nudge this framework into existence.

As I've said before, I think that "protocol tweaking" is the main support
that this driver framework will need to evolve.

From: Mark Underwood <basicmark@yahoo.com>

  Update the SPI framework to remove a potential priority inversion case by
  reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-13 16:29:54 -08:00