Commit Graph

3666 Commits

Author SHA1 Message Date
Linus Torvalds
e4856a70cf Merge branch 'personality' of git://git390.osdl.marist.edu/pub/scm/linux-2.6
* 'personality' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
  [PATCH] remove unused ibcs2/PER_SVR4 in SET_PERSONALITY
2008-10-16 12:32:52 -07:00
Linus Torvalds
8ef50901d3 Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (51 commits)
  [ARM] 5308/1: Fix Viper ISA IRQ handling
  [ARM] 5307/1: pxa: fix CM-X2XX PCMCIA build error
  [ARM] 5306/1: pxa: fix build error on CM-X270
  [ARM] 5302/1: ARM: OMAP: Revert omap3 WDT changes to avoid merge conflict
  [ARM] 5305/1: ARM: OMAP: Fix compile of McBSP by removing unnecessary check
  [ARM] 5301/1: ARM: OMAP: Add missing irq defines
  ARM: OMAP3: Add default kernel config for OMAP LDP
  ARM: OMAP3: Add basic board support for OMAP LDP
  ARM: OMAP3: Defconfig for the Gumstix Overo board (rev 3)
  ARM: OMAP3: Add support for the Gumstix Overo board (rev 3)
  ARM: OMAP3: Add Beagle defconfig
  ARM: OMAP3: Add minimal Beagle board support
  ARM: OMAP3: Add minimal omap3430 support
  ARM: OMAP2: Fix sparse, checkpatch warnings in OMAP2/3 IRQ code
  ARM: OMAP: Fixes to omap_mcbsp_request function
  ARM: OMAP: Add support for OMAP2430 in McBSP
  ARM: OMAP: Add support for McBSP devices 3 - 5 on 34xx
  ARM: OMAP: Allocate McBSP devices dynamically
  Fix sections for omap-mcbsp platform driver
  [ARM] S3C24XX: Additional include moves
  ...
2008-10-16 11:25:32 -07:00
Ben Dooks
cf46b973f7 spi_s3c24xx: pin configuration updates
Add a pin configuration callback for the s3c24xx SPI driver, as there are
several options depending on the channel and the chip in use.

This is needed as the controller may not have been setup by the initial
bootloader and the fact that the SPI controller gets reset over
suspend/resume into slave mode but the GPIO function registers do not.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16 11:21:38 -07:00
Nelson Castillo
55b404fd78 [ARM] S3C24XX: Fix redefine of DEFINE_TIMER() in s3c24xx pwm-clock.c
Do not redefine the DEFINE_TIMER macro. Renamed the local macro
to DEFINE_S3C_TIMER.

Signed-off-by: Nelson Castillo <nelsoneci@gmail.com>
[ben-linux@fluff.org: spelling and subject fix]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-16 16:48:29 +01:00
Ben Dooks
5c37866c6e [ARM] S3C2443: Fix HCLK rate
Fix the calculation of HCLK on the S3C2443, it should not
have been passed through S3C2443_CLKDIV0_HALF_HCLK.

Re-work of original patch from Wei Shuai <cpuwolf@gmail.com>

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-16 16:48:29 +01:00
Dallas Foley
7e90d760ee [ARM] S3C24XX: pwm-clock set_parent mask fix
Fix s3c24xx pwm-clock supports use of the wrong clock when calculating
the bitmask when configuring the parent clock from the set_parent call.

Signed-off-by: Dallas Foley <dfoley@techsol.ca>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-16 16:48:28 +01:00
Thomas Gleixner
4b1135a277 genirq: fix name space collisions of nr_irqs in arch/*
local shadows of global variables are _bad_

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-10-16 16:53:30 +02:00
Martin Schwidefsky
0b59268285 [PATCH] remove unused ibcs2/PER_SVR4 in SET_PERSONALITY
The SET_PERSONALITY macro is always called with a second argument of 0.
Remove the ibcs argument and the various tests to set the PER_SVR4
personality.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-10-16 15:40:05 +02:00
Dominik Brodowski
459fc208ab cpufreq: remove policy->governor setting in drivers initialization
As policy->governor is already set to CPUFREQ_DEFAULT_GOVERNOR in the
(always built-in) cpufreq core, we do not need to set it in the drivers.
This fixes the sparc64 allmodconfig build failure.

Also, remove a totally useles setting of ->policy in cpufreq-pxa3xx.c.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-15 16:42:47 -07:00
Russell King
2502991560 Merge branch 'fixes' into for-linus
Conflicts:

	arch/arm/mach-versatile/core.c
2008-10-15 23:16:07 +01:00
Marc Zyngier
a9ff8f6462 [ARM] 5308/1: Fix Viper ISA IRQ handling
The ISA IRQ renumbering broke the Viper ISA code in interesting ways.
It originally assumed that ISA interrupt were numbered in the order that
is defined by the CPLD registers. Unfortunately, this is no longer the
case.

Furthermore, the viper_irq_handler() function being a chained IRQ
handler, it must ACK the interrupt by itself, or the handler will be
immediately reentered, with the expected damages.

This fix was made possible thanks to the help of David Raeman, who
provided debug information and tested each version of this patch.

Tested-by: David Raeman <david.raeman@gmail.com>

Signed-off-by: Marc Zyngier <maz@misterjones.org>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-15 13:01:36 +01:00
Mike Rapoport
598dca1f4c [ARM] 5306/1: pxa: fix build error on CM-X270
Fix build for CM-X2XX with CONFIG_RTC_DRV_V3020 unset:

CC      arch/arm/mach-pxa/cm-x270.o
/mnt/sdb1/git/linux-2.6-arm/arch/arm/mach-pxa/cm-x270.c: In function 'cmx270_init':
/mnt/sdb1/git/linux-2.6-arm/arch/arm/mach-pxa/cm-x270.c:338: error: implicit declaration of function 'cmx270_init_rtc'
make[2]: *** [arch/arm/mach-pxa/cm-x270.o] Error 1

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-15 12:34:48 +01:00
Russell King
7e69a8c4d0 Merge branch 's3c-move' into devel
Conflicts:

	arch/arm/mach-versatile/core.c
2008-10-14 22:24:51 +01:00
Russell King
b6825d2df5 Merge branch 'omap-all' into devel
Conflicts:

	arch/arm/mach-omap2/gpmc.c
	arch/arm/mach-omap2/irq.c
2008-10-14 22:24:42 +01:00
Tony Lindgren
aa59e19d05 [ARM] 5302/1: ARM: OMAP: Revert omap3 WDT changes to avoid merge conflict
With the upcoming WDT patches OMAP_WDT_BASE is no longer needed
in devices.c. Revert some earlier omap3 changes to avoid merge
conflicts with the WDT patches.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-14 22:24:14 +01:00
Tony Lindgren
a5a5b8c527 [ARM] 5305/1: ARM: OMAP: Fix compile of McBSP by removing unnecessary check
Recent McBSP patches changed to allocating devices dynamically
and the check for OMAP_MAX_MCBSP_COUNT became unnecessary.

The check for OMAP_MAX_MCBSP_COUNT should have been removed with
the earlier McBSP patches in devices.c but was accidentally left
out.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-14 22:24:13 +01:00
Tony Lindgren
a468b6484f [ARM] 5301/1: ARM: OMAP: Add missing irq defines
Some McBSP irq defines were missing that should have been added
with the earlier McBSP patches.

Add the missing McBSP irqs, and a few other missing irqs as
defined in linux-omap tree. Also add a blank line to separate
irq defines from the irq line calculations.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-14 19:32:45 +01:00
Jean Delvare
9df013b3e4 i2c/isp1301_omap: Convert to a new-style i2c driver, part 2
Based on David Brownell's patch for tps65010 and previous work by
Felipe Balbi, this patch finishes converting isp1301_omap to a
new-style i2c driver.

There's definitely room for further drivers cleanups, but these are
out of the scope of this patch.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Tony Lindgren <tony@atomide.com>
2008-10-14 17:30:02 +02:00
Linus Torvalds
cf2fa66055 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (313 commits)
  V4L/DVB (9186): Added support for Prof 7300 DVB-S/S2 cards
  V4L/DVB (9185): S2API: Ensure we have a reasonable ROLLOFF default
  V4L/DVB (9184): cx24116: Change the default SNR units back to percentage by default.
  V4L/DVB (9183): S2API: Return error of the caller provides 0 commands.
  V4L/DVB (9182): S2API: Added support for DTV_HIERARCHY
  V4L/DVB (9181): S2API: Add support fot DTV_GUARD_INTERVAL and DTV_TRANSMISSION_MODE
  V4L/DVB (9180): S2API: Added support for DTV_CODE_RATE_HP/LP
  V4L/DVB (9179): S2API: frontend.h cleanup
  V4L/DVB (9178): cx24116: Add module parameter to return SNR as ESNO.
  V4L/DVB (9177): S2API: Change _8PSK / _16APSK to PSK_8 and APSK_16
  V4L/DVB (9176): Add support for DvbWorld USB cards with STV0288 demodulator.
  V4L/DVB (9175): Remove NULL pointer in stb6000 driver.
  V4L/DVB (9174): Allow custom inittab for ST STV0288 demodulator.
  V4L/DVB (9173): S2API: Remove the hardcoded command limit during validation
  V4L/DVB (9172): S2API: Bugfix related to DVB-S / DVB-S2 tuning for the legacy API.
  V4L/DVB (9171): S2API: Stop an OOPS if illegal commands are dumped in S2API.
  V4L/DVB (9170): cx24116: Sanity checking to data input via S2API to the cx24116 demod.
  V4L/DVB (9169): uvcvideo: Support two new Bison Electronics webcams.
  V4L/DVB (9168): Add support for MSI TV@nywhere Plus remote
  V4L/DVB: v4l2-dev: remove duplicated #include
  ...
2008-10-13 14:03:59 -07:00
Linus Torvalds
20272c8994 Merge branch 'proc' of git://git.kernel.org/pub/scm/linux/kernel/git/adobriyan/proc
* 'proc' of git://git.kernel.org/pub/scm/linux/kernel/git/adobriyan/proc:
  proc: remove kernel.maps_protect
  proc: remove now unneeded ADDBUF macro
  [PATCH] proc: show personality via /proc/pid/personality
  [PATCH] signal, procfs: some lock_task_sighand() users do not need rcu_read_lock()
  proc: move PROC_PAGE_MONITOR to fs/proc/Kconfig
  proc: make grab_header() static
  proc: remove unused get_dma_list()
  proc: remove dummy vmcore_open()
  proc: proc_sys_root tweak
  proc: fix return value of proc_reg_open() in "too late" case

Fixed up trivial conflict in removed file arch/sparc/include/asm/dma_32.h
2008-10-13 10:04:04 -07:00
David Woodhouse
e758936e02 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:

	include/asm-x86/statfs.h
2008-10-13 17:13:56 +01:00
Linus Torvalds
94a9f8ad33 Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  [WATCHDOG] orion5x_wdt.c: add spinlocking
  [WATCHDOG] Orion: add hardware watchdog support
  [WATCHDOG] omap_wdt.c: cleanup a bit omap_wdt.c
  [WATCHDOG] omap_wdt.c: another ioremap() fix
  [WATCHDOG] omap_wdt.c: sync linux-omap changes
  [WATCHDOG] Add AT91SAM9X watchdog
  [WATCHDOG] Add driver for winbond w83697ug/uf watchdog feature
  [WATCHDOG] add watchdog driver IT8716 IT8726 IT8712J/K
2008-10-12 11:51:32 -07:00
Stefan Herbrechtsmeier
8103466315 V4L/DVB (8687): soc-camera: Move .power and .reset from soc_camera host to sensor driver
Make .power and .reset callbacks per camera instead of per host, also move
their invocation to camera drivers.

.arch/arm/mach-pxa/include/mach/camera.h    |    2 -

Signed-off-by: Stefan Herbrechtsmeier <hbmeier@hni.uni-paderborn.de>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12 09:36:50 -02:00
Linus Torvalds
7cc4e87f91 Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (236 commits)
  [ARM] 5300/1: fixup spitz reset during boot
  [ARM] 5295/1: make ZONE_DMA optional
  [ARM] 5239/1: Palm Zire 72 power management support
  [ARM] 5298/1: Drop desc_handle_irq()
  [ARM] 5297/1: [KS8695] Fix two compile-time warnings
  [ARM] 5296/1: [KS8695] Replace macro's with trailing underscores.
  [ARM] pxa: allow multi-machine PCMCIA builds
  [ARM] pxa: add preliminary CPUFREQ support for PXA3xx
  [ARM] pxa: add missing ACCR bit definitions to pxa3xx-regs.h
  [ARM] pxa: rename cpu-pxa.c to cpufreq-pxa2xx.c
  [ARM] pxa/zylonite: add support for USB OHCI
  [ARM] ohci-pxa27x: use ioremap() and offset for register access
  [ARM] ohci-pxa27x: introduce pxa27x_clear_otgph()
  [ARM] ohci-pxa27x: use platform_get_{irq,resource} for the resource
  [ARM] ohci-pxa27x: move OHCI controller specific registers into the driver
  [ARM] ohci-pxa27x: introduce flags to avoid direct access to OHCI registers
  [ARM] pxa: move I2S register and bit definitions into pxa2xx-i2s.c
  [ARM] pxa: simplify DMA register definitions
  [ARM] pxa: make additional DCSR bits valid for PXA3xx
  [ARM] pxa: move i2c register and bit definitions into i2c-pxa.c
  ...

Fixed up conflicts in
	arch/arm/mach-versatile/core.c
	sound/soc/pxa/pxa2xx-ac97.c
	sound/soc/pxa/pxa2xx-i2s.c
manually.
2008-10-11 10:09:45 -07:00
Linus Torvalds
4dd9ec4946 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1075 commits)
  myri10ge: update driver version number to 1.4.3-1.369
  r8169: add shutdown handler
  r8169: preliminary 8168d support
  r8169: support additional 8168cp chipset
  r8169: change default behavior for mildly identified 8168c chipsets
  r8169: add a new 8168cp flavor
  r8169: add a new 8168c flavor (bis)
  r8169: add a new 8168c flavor
  r8169: sync existing 8168 device hardware start sequences with vendor driver
  r8169: 8168b Tx performance tweak
  r8169: make room for more specific 8168 hardware start procedure
  r8169: shuffle some registers handling around (8168 operation only)
  r8169: new phy init parameters for the 8168b
  r8169: update phy init parameters
  r8169: wake up the PHY of the 8168
  af_key: fix SADB_X_SPDDELETE response
  ath9k: Fix return code when ath9k_hw_setpower() fails on reset
  ath9k: remove nasty FAIL macro from ath9k_hw_reset()
  gre: minor cleanups in netlink interface
  gre: fix copy and paste error
  ...
2008-10-11 09:33:18 -07:00
Linus Torvalds
d3570a5a7b Merge branch 'for-linus' of git://git.alsa-project.org/alsa-kernel
* 'for-linus' of git://git.alsa-project.org/alsa-kernel: (258 commits)
  ALSA: hda: VREF powerdown for headphones
  ALSA: hda: STAC_HP_M4
  ALSA: ASoC: Check for machine type in GTA01 machine driver
  ALSA: mtpav - Fix race in probe
  ALSA: usb-audio: dynamic detection of MIDI interfaces in uaxx-quirk
  ALSA: Add a note on dependency of RTC stuff
  ALSA: ASoC: add new param mux to dapm_mux_update_power
  ALSA: Increase components array size
  ALSA: ASoC: Correct inverted Mic PGA Switch control in wm8510 driver
  ALSA: hda: comment typo fix
  ALSA: hda: comment typo fix
  ALSA: hda - Fix PCI SSID for ASROCK K18N78FullHD-hSLI
  ALSA: snd-usb-audio: support for Edirol UA-4FX device
  ALSA: usb - Fix possible Oops at USB-MIDI disconnection
  ALSA: hda - Fix another ALC889A (rev 0x100101)
  ALSA: hda: add more board-specific information for Realtek ALC662 rev1
  ALSA: Correct Vladimir Barinov's e-mail address
  ALSA: cs46xx: Add PCI IDs for TerraTec and Hercules cards
  ALSA: hda: SPDIF stream muting support
  ALSA: hda: appletv support
  ...
2008-10-11 09:16:54 -07:00
Dmitry Baryshkov
69fc7eed5f [ARM] 5300/1: fixup spitz reset during boot
Some machines don't have the pullup/down on their reset
pin, so configuring the reset generating pin as input makes
them reset immediately. Fix that by making reset pin direction
configurable.

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-11 09:52:38 +01:00
Russell King
59aaade725 Merge branch 'omap3-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 into omap-all 2008-10-10 23:10:10 +01:00
Sylver Bruneau
22ac92322c [WATCHDOG] Orion: add hardware watchdog support
This patch allows the use of the hardware watchdog in the
Marvell Orion series of ARM SoCs.

Signed-off-by: Sylver Bruneau <sylver.bruneau@googlemail.com>
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2008-10-10 13:14:17 +00:00
Felipe Balbi
2817142f31 [WATCHDOG] omap_wdt.c: sync linux-omap changes
These are changes that have been sitting in linux-omap
and were never sent upstream.

Hopefully, it'll never happen again at least for this
driver.

Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2008-10-10 13:11:10 +00:00
Vladimir Barinov
d6b52039c9 ALSA: Correct Vladimir Barinov's e-mail address
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-10-10 13:41:45 +02:00
David Vrabel
99ee3a6d45 Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb into for-upstream 2008-10-10 11:47:31 +01:00
Nishant Kamat
99b3075b90 ARM: OMAP3: Add default kernel config for OMAP LDP
This patch adds a default config for the OMAP LDP platform.

Signed-off-by: Nishant Kamat <nskamat@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-10-10 12:12:09 +03:00
Nishant Kamat
492656511b ARM: OMAP3: Add basic board support for OMAP LDP
This adds minimal board support for the OMAP3430 LDP development platform.

Signed-off-by: Nishant Kamat <nskamat@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-10-10 12:06:43 +03:00
Steve Sakoman
778e4875fb ARM: OMAP3: Defconfig for the Gumstix Overo board (rev 3)
Add defconfig for the Gumstix Overo board

Signed-off-by: Steve Sakoman <steve@sakoman.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-10-10 12:06:41 +03:00
Alexey Dobriyan
a70973c214 proc: remove unused get_dma_list()
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2008-10-10 04:18:56 +04:00
Russell King
6defd90433 Merge branch 'for-rmk' of git://git.marvell.com/orion
Merge branch 'orion-devel' into devel
2008-10-09 21:33:07 +01:00
Russell King
c97f68145e Merge branch 'for-rmk' of git://source.mvista.com/git/linux-davinci-2.6.git
Merge branch 'davinci' into devel
2008-10-09 21:33:05 +01:00
Russell King
b1add0480a Merge branch 'for-rmk' of git://pasiphae.extern.pengutronix.de/git/imx/linux-2.6.git
Merge branch 'imx-devel' into devel
2008-10-09 21:33:03 +01:00
Russell King
3f30a09a61 Merge branch 'pxa-all' into devel
Conflicts:

	arch/arm/mach-pxa/Kconfig
	arch/arm/mach-pxa/corgi.c
	arch/arm/mach-pxa/include/mach/hardware.h
	arch/arm/mach-pxa/spitz.c
2008-10-09 21:33:02 +01:00
Russell King
9e165acf1b Merge branch 'at91' into devel 2008-10-09 21:31:58 +01:00
Russell King
6a4690c22f Merge branch 'ptebits' into devel
Conflicts:

	arch/arm/Kconfig
2008-10-09 21:31:56 +01:00
Russell King
90bb28b064 Merge branches 'machtypes', 'core', 'ep93xx', 'ks8695', 'netdev' and 'sa1100' into devel 2008-10-09 21:31:54 +01:00
Nicolas Pitre
3bca103a1e [ARM] 5295/1: make ZONE_DMA optional
Most ARM machines don't need a special "DMA" memory zone, and
when configured out, the kernel becomes a bit smaller:

|   text    data     bss     dec     hex filename
|3826182  102384  111700 4040266  3da64a vmlinux
|3823593  101616  111700 4036909  3d992d vmlinux.nodmazone

This is because the system now has only one zone total which effect is
to optimize away many conditionals in page allocation paths.

So let's configure this zone only on machines that need split zones.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-09 21:29:46 +01:00
Russell King
8e5bdc44ba Merge branch 'omap2-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 into omap-all 2008-10-09 17:21:34 +01:00
Steve Sakoman
eba2645aeb ARM: OMAP3: Add support for the Gumstix Overo board (rev 3)
This patch adds minimal overo support.

Signed-off-by: Steve Sakoman <steve@sakoman.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-10-09 17:51:43 +03:00
Syed Mohammed, Khasim
22b401bfa9 ARM: OMAP3: Add Beagle defconfig
Add Beagle defconfig

Signed-off-by: Syed Mohammed, Khasim <khasim@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-10-09 17:51:42 +03:00
Syed Mohammed, Khasim
2885f00049 ARM: OMAP3: Add minimal Beagle board support
Add minimal Beagle board support. Based on earlier patches
by Syed Mohammed Khasim with some fixes from linux-omap tree.

Signed-off-by: Syed Mohammed Khasim <khasim@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-10-09 17:51:42 +03:00
Syed Mohammed, Khasim
cc26b3b01b ARM: OMAP3: Add minimal omap3430 support
Add minimal omap3430 support based on earlier patches from
Syed Mohammed Khasim. Also merge in omap34xx SRAM support
from Karthik Dasu and use consistent naming for sram init
functions.

Also do following changes that make 34xx support usable:

- Remove unused sram.c functions for 34xx

- Rename IRQ_SIR_IRQ to INTCPS_SIR_IRQ and define it locally
  in entry-macro.S

- Update mach-omap2/io.c to support 2420, 2430, and 34xx

- Also merge in 34xx GPMC changes to add fields wr_access and
  wr_data_mux_bus from Adrian Hunter

- Remove memory initialization call omap2_init_memory() until
  until more generic memory initialization patches are posted.
  It's OK to rely on bootloader initialization until then.

Signed-off-by: Syed Mohammed, Khasim <khasim@ti.com>
Signed-off-by: Karthik Dasu<karthik-dp@ti.com>
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-10-09 17:51:41 +03:00
Paul Walmsley
2e7509e5b3 ARM: OMAP2: Fix sparse, checkpatch warnings in OMAP2/3 IRQ code
Fix sparse warnings in mach-omap2/irq.c. Fix by defining
intc_bank_write_reg() and intc_bank_read_reg(), and convert INTC module
register access to use them rather than __raw_{read,write}l.

Also clear up some checkpatch warnings involving includes from asm/
rather than linux/.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-10-09 17:51:28 +03:00
Sergey Lapin
fda50a1c49 [ARM] 5239/1: Palm Zire 72 power management support
This patch contains Palm Zire 72 power
management support.

Depends on #5238/1

Signed-off-by: Sergey Lapin <slapin@ossfans.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-09 15:12:07 +01:00
Dmitry Baryshkov
d8aa0251f1 [ARM] 5298/1: Drop desc_handle_irq()
desc_handle_irq() was declared as obsolete since long ago.
Replace it with generic_handle_irq()

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-09 15:00:36 +01:00
Andrew Victor
8e6c81fe28 [ARM] 5297/1: [KS8695] Fix two compile-time warnings
Fix two warnings when compiling for the KS8695 processor.

arch/arm/include/asm/dma-mapping.h: In function 'dma_to_virt':
arch/arm/include/asm/dma-mapping.h:40: warning: return makes pointer
from integer without a cast

Section mismatch in reference from the function pcibios_fixup_bus() to
the (unknown reference) .devinit.text:(unknown)
The function pcibios_fixup_bus() references
the (unknown reference) __devinit (unknown).
This is often because pcibios_fixup_bus lacks a __devinit
annotation or the annotation of (unknown) is wrong.

Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-09 10:16:00 +01:00
Andrew Victor
8d163b3fa5 [ARM] 5296/1: [KS8695] Replace macro's with trailing underscores.
Replace Macro names that have trailing underscores.
Also use the IOPD() macro instead of a hard-coded bit-shift (for
better readability).

Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-09 10:16:00 +01:00
Ingo Molnar
990d0f2ced Merge branches 'sched/devel', 'sched/cpu-hotplug', 'sched/cpusets' and 'sched/urgent' into sched/core 2008-10-08 11:31:02 +02:00
Jarkko Nikula
5a07055a38 ARM: OMAP: Fixes to omap_mcbsp_request function
Bootloader may let McBSP logic running so make sure that block is idle
before requesting IRQs. Also make sure that TX and RX waitqueues are
initialized before request_irq.

Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-10-08 10:01:41 +03:00
Jarkko Nikula
05228c35c6 ARM: OMAP: Add support for OMAP2430 in McBSP
Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-10-08 10:01:40 +03:00
Chandra Shekhar
9c8e3a0fac ARM: OMAP: Add support for McBSP devices 3 - 5 on 34xx
Based on Chandra's earlier patches in linux-omap tree.

Signed-off-by: Chandra Shekhar <x0044955@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-10-08 10:01:40 +03:00
Chandra Shekhar
b4b58f5834 ARM: OMAP: Allocate McBSP devices dynamically
Based on Chandra's earlier patches in linux-omap tree.

Note that omap1_mcbsp_check and omap2_mcbsp_check are no longer
needed as there's now omap_mcbsp_check_valid_id() defined.

Also some functions can now be marked __init.

Signed-off-by: Chandra Shekhar <x0044955@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-10-08 10:01:39 +03:00
Uwe Kleine-König
25cef22514 Fix sections for omap-mcbsp platform driver
Don't use __init but __devinit to define probe function.  A pointer to
omap_mcbsp_probe is passed to the core via platform_driver_register and
so the function must not disappear when the init code is freed.  Using
__init and having HOTPLUG=y the following probably oopses:

	echo -n omap-mcbsp.1 > /sys/bus/platform/driver/omap-mcbsp/unbind
	echo -n omap-mcbsp.1 > /sys/bus/platform/driver/omap-mcbsp/bind

While at it move the remove function to the .devexit.text section.

Signed-off-by: Uwe Kleine-König <ukleinek@strlen.de>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-10-08 10:01:39 +03:00
Ben Dooks
d5120ae72a [ARM] S3C24XX: Additional include moves
Continue moving the include files into arch/arm

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-07 23:09:51 +01:00
Ben Dooks
a2b7ba9ca4 [ARM] S3C24XX: Move files out of include/asm-arm/plat-s3c*
First move of items out of include/asm-arm/plat-s3c* to their
new homes under arch/arm/plat-s3c/include/plat and
arch/arm/plat-s3c24xx/include/plat directories.

Note, we have to create a dummy arch/arm/plat-s3c/Makefile to
allow us to add arch/arm/plat-s3c/include/plat to the path.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-07 22:26:09 +01:00
Eric Miao
4f788bb200 [ARM] pxa: add preliminary CPUFREQ support for PXA3xx
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-07 19:12:59 +01:00
Eric Miao
5c52de4a66 [ARM] pxa: add missing ACCR bit definitions to pxa3xx-regs.h
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-07 19:12:59 +01:00
Eric Miao
0d1bde9ed1 [ARM] pxa: rename cpu-pxa.c to cpufreq-pxa2xx.c
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-07 19:12:59 +01:00
Eric Miao
7ff4353569 [ARM] pxa/zylonite: add support for USB OHCI
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-07 19:12:59 +01:00
Eric Miao
0c392ed9a7 [ARM] ohci-pxa27x: use ioremap() and offset for register access
This avoid the pre-mapping of OHCI controller register space, and the
mapping is made only when necessary (OHCI is probed).

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-07 19:12:58 +01:00
Eric Miao
0cb0b0d3c6 [ARM] ohci-pxa27x: introduce pxa27x_clear_otgph()
Direct access to pxa27x specific register PSSR in a generic ohci driver
is no good, introduce pxa27x_clear_otgph() and move the implementation
into processor specific code.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-07 19:12:58 +01:00
Eric Miao
596050bc75 [ARM] ohci-pxa27x: move OHCI controller specific registers into the driver
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-07 19:12:57 +01:00
Eric Miao
097b53348f [ARM] ohci-pxa27x: introduce flags to avoid direct access to OHCI registers
Direct access to USB host controller registers is considered to be not
portable, and is usually a bad sign for poorly abstracted interface.
Introduce .flags and .power_on_delay to "struct pxaohci_platform_data"
so that most platforms don't bother to write their own .init/.exit()
sequences.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-07 19:12:57 +01:00
Eric Miao
52358ba3a8 [ARM] pxa: move I2S register and bit definitions into pxa2xx-i2s.c
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-07 19:12:56 +01:00
Eric Miao
87f3dd7797 [ARM] pxa: simplify DMA register definitions
1. DRCMRxx is no longer recommended, use DRCMR(xx) instead, and
   pass DRCMR index by "struct resource" if possible

2. DCSRxx, DDADRxx, DSADRxx, DTADRxx, DCMDxx is never used, use
   DCSR(), DDADR(), DSADR(), DTADR(), DCMD() instead

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Acked-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-07 19:12:56 +01:00
Eric Miao
cbd18f8e3d [ARM] pxa: make additional DCSR bits valid for PXA3xx
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-07 19:12:56 +01:00
Eric Miao
283afa0661 [ARM] pxa: move i2c register and bit definitions into i2c-pxa.c
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-07 19:12:55 +01:00
Eric Miao
e7f3c60037 [ARM] pxa: fix incorrect initialization of mfp sysdev when not pxa2xx
The initialization of mfp sysdev in pxa2xx_mfp_init() shall really be
avoided when !cpu_is_pxa2xx().

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-07 19:12:55 +01:00
Russell King
5a89770daa Merge branches 'pxa-core' and 'pxa-machines' into pxa-all
Conflicts:

	arch/arm/mach-pxa/Kconfig
	arch/arm/mach-pxa/pxa25x.c
	arch/arm/mach-pxa/pxa27x.c
2008-10-07 19:08:56 +01:00
Russell King
af7c951d76 Merge branch 'for_rmk' of git://git.mnementh.co.uk/linux-2.6-im
Merge branch 'pxa-eseries' into pxa-machines

Conflicts:

	arch/arm/mach-pxa/Makefile
2008-10-07 19:08:35 +01:00
Russell King
cc513ac0f2 Merge branch 'viper-for-rmk' of git://www.misterjones.org/linux-2.6-arm
Merge branch 'pxa-viper' into pxa-machines

Conflicts:

	arch/arm/mach-pxa/Makefile
	drivers/pcmcia/Kconfig
	drivers/pcmcia/Makefile
2008-10-07 19:08:32 +01:00
Russell King
1543966a07 Merge branch 'pxa-palm' into pxa-machines
Conflicts:

	drivers/mfd/Kconfig
	drivers/pcmcia/Makefile
2008-10-07 19:07:22 +01:00
Russell King
5ff7f78a3d Merge branch 'pxa-trizeps' into pxa-machines
Conflicts:

	drivers/pcmcia/Makefile
2008-10-07 19:06:52 +01:00
Russell King
35437b6192 Merge branches 'metronomefb', 'pxa-cm2xx', 'pxa-gumstix', 'pxa-misc', 'pxa-mitac', 'pxa-mp900', 'pxa-zylonite' and 'pxa-zaurus' into pxa-machines
Conflicts:

	arch/arm/mach-pxa/poodle.c
2008-10-07 19:06:22 +01:00
Mike Rapoport
f3ec5cc92a [ARM] 5285/1: pxa: update xm_x2xx_defconfig
Signed-off-by: Russ Dill <russ.dill@gmail.com>
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-07 12:08:15 +01:00
Mike Rapoport
49a7061dca [ARM] 5284/1: pxa: cm-x255: add NOR and NAND flash support
This patch adds support for NOR and NAND flashes on CM-X255.
The NAND flash support uses not yet merged GPIO NAND driver.

Signed-off-by: Russ Dill <russ.dill@gmail.com>
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-07 12:08:14 +01:00
Mike Rapoport
a7f3f0309b [ARM] 5282/1: pxa: add CM-X255 support
Signed-off-by: Russ Dill <russ.dill@gmail.com>
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-07 12:05:07 +01:00
Mike Rapoport
4adc5fb673 [ARM] 5281/1: pxa: split cm-x2xx.c to cm-x2xx.c and cm-x270.c
Signed-off-by: Russ Dill <russ.dill@gmail.com>
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-07 12:05:06 +01:00
Mike Rapoport
da591937ba [ARM] 5280/1: pxa: prepare cm-x2xx.c and cm-x2xx-pci.[ch] for addition of CM-X255
- Change CM-X255 and CM-X270 common function prefix from cmx270 to cmx2xx
- Split cmx2xx_init to common and CM-X270-specific parts
- Use dynamic assignement for DM9000 resources and led GPIOs.

Signed-off-by: Russ Dill <russ.dill@gmail.com>
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-07 12:05:05 +01:00
Mike Rapoport
7d76e3f171 [ARM] 5286/2: pxa: rename cm-x270* to cm-x2xx* to allow addition of cm-x255 support
Signed-off-by: Russ Dill <russ.dill@gmail.com>
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-07 12:05:04 +01:00
Hartley Sweeten
446b097a42 [ARM] 5293/1: ep93xx: add defines for external chipselects
This patch adds defines for the external chipselect physical base
addresses available with the EP93xx. These are meant to be used
in the platform init code.

In addition, documentation about the synchronous/asynchronous boot
modes for the EP93xx and a reference to errata about issues with
synchronous booting has been added.

Signed-off-by: <H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-07 10:53:22 +01:00
Tony Lindgren
646e3ed1a3 ARM: OMAP2: Misc updates from linux-omap tree
Misc updates from linux-omap tree, mostly to update common
device initialization and add missing defines from linux-omap
tree. Also some changes to make room for adding 34xx in
following patches.

Note that the I2C resources are now set up in
arch/arm/plat-omap/i2c.c helper, and can be removed
from devices.c.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-10-06 15:49:36 +03:00
Paul Walmsley
fd1dc87ded ARM: OMAP2: Fix sparse, checkpatch warnings fro GPMC code, use ioremap
Fix sparse, checkpatch warnings fro GPMC code.

Also change to use ioremap, and add missing function prototypes
to gpmc.h.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-10-06 15:49:17 +03:00
Vikram Pandita
2351872c44 ARM: OMAP2: Add pinmux support for omap34xx
This patch adds pinmux support for OMAP3. Incorporated review comments
from Tony to make mux_value as bit mask. Tested on 3430SDP.

Also merge in adding of I2C pins from Jarkko Nikula.

Acked-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-10-06 15:49:16 +03:00
Tony Lindgren
0e56484869 ARM: OMAP2: Use omap_globals for CPU detection for multi-omap
This allows to get rid of the ifdefs and will allow simpler
CPU detection in the future.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-10-06 15:49:16 +03:00
Tony Lindgren
1835f1d720 ARM: OMAP2: Move sleep.S into sleep24xx.S
Some register offsets are different for 242x and 243x. This
will allow compiling sleep code for both chips into the same
kernel. Pass the addresses for SDRC_DDLA_CTRL and SDRC_POWER to the
omap24xx_cpu_suspend instead of loading the values since the only.

Also fix a bug to call omap2_sram_suspend with the value of SDRC_DLLA_CTRL
instead of the address as that's what omap24xx_cpu_suspend expects to
determine between DDR and SDR. This bug has not been noticed as
the boards seem to have DDR instead of SDR.

Note that some PM patches are still missing. The PM patches will
be added later on once the base files are in sync with linux-omap
tree.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-10-06 15:49:15 +03:00
Jouni Hogander
6e81176dc8 ARM: OMAP2 Provide function to enable/disable uart clocks
This patch adds common function to enable/disable omap2/3 uart
clocks. Enabled uarts are passed by bootloader in atags and clocks for
these enabled uarts are touched.

Signed-off-by: Jouni Hogander <jouni.hogander@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-10-06 15:49:15 +03:00
Hartley Sweeten
a0a08fdca5 [ARM] 5273/2: ep93xx: move ethernet support into core.c
All EP93xx based systems can support Ethernet. This patch moves
the platform_device setup from the various board support files
into the core support file. The Ethernet driver data still remains
in the individual platform setup files to allow specific platform
configuration.

This also adds Ethernet support to the edb9302, edb9312, and
edb9315 platforms.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-04 20:04:35 +01:00
Jonathan Cameron
c46c948260 [ARM] 5278/1: i2c-pxa fast mode support
Add fast_mode option to i2c_pxa_platform_data and use it to set the
ICR_FM bit appropriately when i2c_pxa_reset is called. Parameter
called fast_mode rather than frequency as this driver is also used
for the i2c_pxa_pwr bus which has different normal and fast frequencies.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-03 15:57:06 +01:00
Russell King
56f68556d7 Merge unstable branch 'omap-rmk'
Merge branch 'omap-rmk' into omap-all
2008-10-03 11:52:33 +01:00
Russell King
fd9470ce3a Merge branch 'omap2-clock' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git
Merge branch 'omap2-clock' into omap-all
2008-10-03 11:52:30 +01:00
Catalin Marinas
000b502592 [ARM] 5229/3: Replace some ARMv7 opcodes with the instruction name
These instructions were placed in the code directly as opcodes because
early compilers didn't support them. Toolchains supporting ARMv7
understand these instructions and the patch puts the mnemonics back.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-03 11:32:09 +01:00
Hartley Sweeten
92e88aa7fb [ARM] 5276/1: ep93xx: allow selecting UART for early kernel messages
Currently on the EP93xx platform early kernel messages go to UART1.
Since this UART is the only one that has modem control signals it
might be used for another purpose and it is undesirable for those
messages to appear. This patch allows one of the other UARTs to be
selected in the kernel configuration. It is assumed that the
bootloader has configured and initialized the UART since this was the
previous assumption.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-03 11:03:39 +01:00
Dmitry Baryshkov
ec36b16d0d [ARM] 4733/1: export sharpsl_param
EXPORT sharpsl_param which is necessary to support modular build of some depending drivers.

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-03 10:18:35 +01:00
Kristoffer Ericson
49ea26d0a0 [ARM] 5277/1: Add basic support for MobilePro 900/c
This patch adds basic support for the Mobilepro
900/c mini-laptop. At present it won't do much
more than build and boot.

Signed-off-by: Kristoffer Ericson <Kristoffer.Ericson@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-02 22:56:05 +01:00
Marek Vašut
4e9687d9c8 [ARM] 5248/1: wm97xx generic battery driver
This patch adds generic battery driver for wm97xx chips.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Acked-by: Anton Vorontsov <cbouatmailru@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-02 22:48:34 +01:00
Nicolas Pitre
3319f5e51a [ARM] 5274/1: simplify request_standard_resources()
There is no point converting memory bank addresses from physical to
virtual just to convert them back to physical addresses.  Furthermore
this isn't "right" for highmem even if in this case the end result is
the correct one.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-02 22:46:21 +01:00
Jürgen Schindele
2532967147 [ARM] 5251/1: remove old LED support for Trizeps4 SOM
Remove the old led support in arch/arm/mach-pxa/leds...
for TRIZEPS4 SOM. It is / will be replaced by generic
led driver drivers/leds/...

Signed-off-by: Jürgen Schindele <linux@schindele.name>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-01 22:34:34 +01:00
Jürgen Schindele
642aa6637e [ARM] 5204/1: Trizeps4 SOM update
- use MFP-API for GPIO
- support TRIZEPS4WL module
- cleanups

Signed-off-by: Jrgen Schindele <linux@schindele.name>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-01 22:33:11 +01:00
Kristoffer Ericson
bda0308609 [ARM] 5270/1: Fix Formatting in mach-sa1100/ machine files
This patch fixes formatting issues in mach-sa1100/
machine files. More specificly badge4.c,generic.c and
pleb.c.

Signed-off-by: Kristoffer Ericson <Kristoffer.Ericson@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-01 22:29:43 +01:00
Kristoffer Ericson
89c816b948 [ARM] 5256/1: Update jornada default config
This patch updates the jornada default
config (which was made for 2.6.12). Plenty
of development has happend since then, most
importantly the SSP driver and kbd/touchscr.

This config has been tested to compile
and bootup properly.

Signed-off-by: Kristoffer Ericson <Kristoffer.Ericson@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-01 22:29:33 +01:00
Russell King
4ba3f7c559 [ARM] mm: allow LH7A40x to use sparsemem
Enable Sparsemem support for LH7A40x SoCs, while still allowing the
existing discontig support for the time being.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-01 21:42:08 +01:00
Russell King
07a2f737ba [ARM] mm: deprecate discontigmem on ARM
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-01 21:41:32 +01:00
Russell King
ee93916efe [ARM] mm: switch SA1100 to use sparsemem
Tested on Assabet, and Assabet with Neponset's SDRAM at 3328M phys.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-01 21:03:21 +01:00
Russell King
07f841b7c5 [ARM] mm: enable sparsemem on clps7500 and RiscPC
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-01 17:24:04 +01:00
Russell King
b7a69ac303 [ARM] mm: finish ARM sparsemem support
... including some comments about the ordering required to bring
sparsemem up.  You have to repeatedly guess, test, reguess, try
again and again to work out what the right ordering is.  Many
hours later...

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-01 17:24:04 +01:00
Russell King
d2a38ef9c1 [ARM] mm: provide helpers for accessing membanks
Provide helpers for getting physical addresses or pfns from the
meminfo array, and use them.  Move for_each_nodebank() to
asm/setup.h alongside the meminfo structure definition.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-01 17:22:02 +01:00
Russell King
8ec53663d2 [ARM] Improve non-executable support
Add support for detecting non-executable stack binaries, and adjust
permissions to prevent execution from data and stack areas.  Also,
ensure that READ_IMPLIES_EXEC is enabled for older CPUs where that
is true, and for any executable-stack binary.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-01 16:41:10 +01:00
Russell King
5ec9407dd1 [ARM] Don't include asm/elf.h in asm code
asm code really wants asm/hwcap.h, so include that instead.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-01 16:41:10 +01:00
Russell King
9b727abdff [ARM] Remove MT_NONSHARED_DEVICE alias
Use MT_DEVICE_NONSHARED instead.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-01 16:41:07 +01:00
Russell King
db5b716947 [ARM] Remove MT_DEVICE_IXP2000 and associated definitions
As of the previous commit, MT_DEVICE_IXP2000 encodes to the same
PTE bit encoding as MT_DEVICE, so it's now redundant.  Convert
MT_DEVICE_IXP2000 to use MT_DEVICE instead, and remove its aliases.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-01 16:41:06 +01:00
Russell King
40df2d1d85 [ARM] Update Xscale and Xscale3 PTE mappings
Use 'shared device' mappings for devices, and use the standard
bit combinations for Xscale3.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-01 16:41:04 +01:00
Russell King
40d192b63d [ARM] remove 'prot_pte_ext' from memory type table
This member is now redundant; the memory type is encoded in the Linux
PTE bits.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-01 16:41:02 +01:00
Russell King
3f69c0c1af [ARM] Convert ARMv7 to use TEX remapping
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-01 16:41:01 +01:00
Russell King
639b0ae7f5 [ARM] Convert ARMv6 and ARMv7 to use new memory types
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-01 16:41:00 +01:00
Russell King
9e8b5199a7 [ARM] Convert Xscale and Xscale3 to use new memory types
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-01 16:40:58 +01:00
Russell King
bb30f36f9b [ARM] Introduce new PTE memory type bits
Provide L_PTE_MT_xxx definitions to describe the memory types that we
use in Linux/ARM.  These definitions are carefully picked such that:

1. their LSBs match what is required for pre-ARMv6 CPUs.
2. they all have a unique encoding, including after modification
   by build_mem_type_table() (the result being that some have more
   than one combination.)

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-01 16:40:56 +01:00
Russell King
9cff96e5bf [ARM] Re-jig Linux PTE bits to allow room for 4 memory type bits
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-01 16:40:54 +01:00
Russell King
da0916539d [ARM] Convert set_pte_ext implementions to macros
There are actually only four separate implementations of set_pte_ext.
Use assembler macros to insert code for these into the proc-*.S files.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-01 16:40:52 +01:00
David S. Miller
b262e60309 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:

	drivers/net/wireless/ath9k/core.c
	drivers/net/wireless/ath9k/main.c
	net/core/dev.c
2008-10-01 06:12:56 -07:00
Russell King
6c5da7aced [ARM] mm: move vmalloc= parsing to arch/arm/mm/mmu.c
There's no point scattering this around the tree, the parsing
of the parameter might as well live beside the code which uses
it.  That also means we can make vmalloc_reserve a static
variable.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-30 21:34:16 +01:00
Russell King
eca73214c9 [ARM] mm: move validation of membanks to one place
The newly introduced sanity_check_meminfo() function should be
used to collect all validation of the meminfo array, which we
have in bootmem_init().  Move it there.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-30 21:34:15 +01:00
Nicolas Pitre
99c6bb390c [ARM] Feroceon: small cleanups to L2 cache code
- Make sure that coprocessor instructions for range ops are contiguous
  and not reordered.

- s/invalidate_and_disable_dcache/flush_and_disable_dcache/

- Don't re-enable I/D caches if they were not enabled initially.

- Change some masks to shifts for better generated code.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
Acked-by: Lennert Buytenhek <buytenh@marvell.com>
2008-09-30 13:41:54 -04:00
Nicolas Pitre
da46c79a54 [ARM] 5272/1: remove conditional compilation in show_pte()
The PTRS_PER_PMD != 1 condition can be evaluated with C code and
optimized at compile time.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-30 16:41:04 +01:00
Nicolas Pitre
dfcc64497c [ARM] 5271/1: get rid of pages_to_mb()
There is no use of this in the whole tree.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-30 16:40:59 +01:00
Catalin Marinas
76ebc6a429 [ARM] 5269/1: ARMv7: Use -march=armv7-a as compiler flag
The current -march=armv7a is not supported by mainline gcc.

Cc: Paul Brook <paul@codesourcery.com>
Cc: Wei Zhong <weizhong@broadcom.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-30 11:30:54 +01:00
Russell King
7807c6098a [ARM] dma: fix some comments in dma-mapping.h
... to prevent people being mislead.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-30 11:30:53 +01:00
Russell King
309dbbabee [ARM] dma: don't touch cache on dma_*_for_cpu()
As per the dma_unmap_* calls, we don't touch the cache when a DMA
buffer transitions from device to CPU ownership.  Presently, no
problems have been identified with speculative cache prefetching
which in itself is a new feature in later architectures.  We may
have to revisit the DMA API later for these architectures anyway.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-30 11:01:36 +01:00
Linus Torvalds
929675d58c Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
  kgdboc,tty: Fix tty polling search to use name correctly
  kgdb, x86_64: fix PS CS SS registers in gdb serial
  kgdb, x86_64: gdb serial has BX and DX reversed
  kgdb, x86, arm, mips, powerpc: ignore user space single stepping
  kgdb: could not write to the last of valid memory with kgdb
2008-09-29 08:30:11 -07:00
Andrew Victor
791ccf2e4d [ARM] 5267/1: [AT91] Name conflict in mach-at91/leds.c
The name of the platform device 'at91_pwm_leds' conflicts with the
function at91_pwm_leds().
So rename the device 'at91_pwm_leds_device' to be more specific.
Similarly rename 'at91_gpio_leds_device' for consistency.

Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-29 15:46:26 +01:00
Andrew Victor
bf07e4404e [ARM] 5261/1: [AT91] Support for LEDs on Conitec ARM&EVA board
Add support for the LEDs on the Conitec ARM&EVA board.

Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-29 15:46:03 +01:00
Russell King
0e18b5d7c6 [ARM] dma: add validation of DMA params
Validate the direction argument like x86 does.  In addition,
validate the dma_unmap_* parameters against those passed to
dma_map_* when using the DMA bounce code.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-29 13:54:28 +01:00
Russell King
3216a97bb0 [ARM] dma: coding style cleanups
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-29 10:41:02 +01:00
Russell King
125ab12acf [ARM] dma: fix dmabounce dma_sync_xxx() implementations
The dmabounce dma_sync_xxx() implementation have been broken for
quite some time; they all copy data between the DMA buffer and
the CPU visible buffer no irrespective of the change of ownership.
(IOW, a DMA_FROM_DEVICE mapping copies data from the DMA buffer
to the CPU buffer during a call to dma_sync_single_for_device().)

Fix it by getting rid of sync_single(), moving the contents into
the recently created dmabounce_sync_for_xxx() functions and adjusting
appropriately.

This also makes it possible to properly support the DMA range sync
functions.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-29 10:40:22 +01:00
Russell King
8c8a0ec57e [ARM] dma: use new dmabounce_sync_for_xxx() for dma_sync_single_xxx()
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-29 10:40:16 +01:00
Russell King
2638b4dbe7 [ARM] dma: Reduce to one dma_sync_sg_* implementation
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-29 10:40:16 +01:00
Russell King
a55facae05 [ARM] pxa: make "gpio_leds" static
Magician's "gpio_leds" was global, but actually is supposed to be
private.  Make it so.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-26 23:43:22 +01:00
Eric Miao
6517265922 [ARM] pxa/pcm027: convert to use new MFP API
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-26 23:43:22 +01:00
Eric Miao
0219e83581 [ARM] pxa/lpd270: use new .lcd_conn to specify LCD info
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-26 23:43:22 +01:00
Eric Miao
fd90ff2000 [ARM] pxa/lpd270: convert to use new MFP API
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-26 23:43:22 +01:00
Eric Miao
b40c6762ba [ARM] pxa/idp: remove the unnecessary idp_init_irq()
TOUCH_PANEL_IRQ is never referenced, and set_irq_type() shouldn't
be called in this way, remove it, as well as the idp_init_irq(),
and use pxa25x_init_irq() instead.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Cc: Cliff Brake <cliff.brake@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-26 23:43:21 +01:00
Eric Miao
bea95d2a12 [ARM] pxa/idp: make use of "lcd_conn", add LCD pin configurations
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Cc: Cliff Brake <cliff.brake@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-26 23:43:21 +01:00
Eric Miao
399ba6268b [ARM] pxa/idp: convert to use new MFP API
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Cc: Cliff Brake <cliff.brake@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-26 23:43:21 +01:00